sbuild (Debian sbuild) 0.85.10 (30 May 2024) on carme.larted.org.uk +==============================================================================+ | libcgi-session-perl 4.48-4 (amd64) Mon, 05 Aug 2024 12:35:07 +0000 | +==============================================================================+ Package: libcgi-session-perl Version: 4.48-4 Source Version: 4.48-4 Distribution: sid Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: NOTICE: Log filtering will replace 'var/run/schroot/mount/sid-amd64-debomatic-15d7f0f1-e8d7-4b9c-be29-39bff5008e61' with '<>' +------------------------------------------------------------------------------+ | Chroot Setup Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libcgi-session-perl_4.48-4 sid amd64 ----------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libcgi-session-perl_4.48-4 sid amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: NOTICE: Log filtering will replace 'build/libcgi-session-perl-IBb9XK/resolver-YYvxPm' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Hit:1 http://deb.debian.org/debian unstable InRelease Hit:2 http://deb.debian.org/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/libcgi-session-perl_4.48-4.dsc exists in /srv/debomatic/incoming; copying to chroot I: NOTICE: Log filtering will replace 'build/libcgi-session-perl-IBb9XK/libcgi-session-perl-4.48' with '<>' I: NOTICE: Log filtering will replace 'build/libcgi-session-perl-IBb9XK' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 13), libmodule-build-perl, build-essential, fakeroot, perl, libfreezethaw-perl, libcgi-pm-perl | perl (<< 5.19), libcgi-simple-perl, libdbi-perl, libdbd-sqlite3-perl Filtered Build-Depends: debhelper-compat (= 13), libmodule-build-perl, build-essential, fakeroot, perl, libfreezethaw-perl, libcgi-pm-perl, libcgi-simple-perl, libdbi-perl, libdbd-sqlite3-perl dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [609 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [772 B] Get:5 copy:/<>/apt_archive ./ Packages [767 B] Fetched 2148 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libcgi-pm-perl libcgi-simple-perl libdbd-sqlite3-perl libdbi-perl libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl libfreezethaw-perl libhtml-parser-perl libhtml-tagset-perl libicu72 libmagic-mgc libmagic1t64 libmodule-build-perl libpipeline1 libtool libuchardet0 liburi-perl libxml2 m4 man-db po-debconf sensible-utils Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev groff libclone-perl libmldbm-perl libnet-daemon-perl libsql-statement-perl libdata-dump-perl libtool-doc gfortran | fortran95-compiler gcj-jdk libbusiness-isbn-perl libregexp-ipv6-perl libwww-perl m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libcgi-fast-perl libarchive-cpio-perl libhttp-message-perl libmodule-signature-perl libpod-readme-perl libsoftware-license-perl libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libcgi-pm-perl libcgi-simple-perl libdbd-sqlite3-perl libdbi-perl libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl libfreezethaw-perl libhtml-parser-perl libhtml-tagset-perl libicu72 libmagic-mgc libmagic1t64 libmodule-build-perl libpipeline1 libtool libuchardet0 liburi-perl libxml2 m4 man-db po-debconf sbuild-build-depends-main-dummy sensible-utils 0 upgraded, 41 newly installed, 0 to remove and 0 not upgraded. Need to get 21.4 MB of archives. After this operation, 80.0 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [936 B] Get:2 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get:3 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.45-3 [42.9 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.40.2-2 [96.4 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.7-2 [38.0 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.12.1-2 [1411 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.19-4 [287 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.71-3 [332 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.22.5-2 [723 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.16 [88.6 kB] Get:18 http://deb.debian.org/debian unstable/main amd64 libtool all 2.4.7-7 [517 kB] Get:19 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get:20 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:21 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get:22 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get:23 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.191-2 [188 kB] Get:24 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get:25 http://deb.debian.org/debian unstable/main amd64 libicu72 amd64 72.1-5 [9396 kB] Get:26 http://deb.debian.org/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg-3+b1 [671 kB] Get:27 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get:28 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:29 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get:30 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.16 [891 kB] Get:31 http://deb.debian.org/debian unstable/main amd64 libfakeroot amd64 1.35.1-1 [28.6 kB] Get:32 http://deb.debian.org/debian unstable/main amd64 fakeroot amd64 1.35.1-1 [74.5 kB] Get:33 http://deb.debian.org/debian unstable/main amd64 libhtml-tagset-perl all 3.24-1 [14.7 kB] Get:34 http://deb.debian.org/debian unstable/main amd64 liburi-perl all 5.28-1 [98.6 kB] Get:35 http://deb.debian.org/debian unstable/main amd64 libhtml-parser-perl amd64 3.83-1 [99.4 kB] Get:36 http://deb.debian.org/debian unstable/main amd64 libcgi-pm-perl all 4.66-1 [217 kB] Get:37 http://deb.debian.org/debian unstable/main amd64 libcgi-simple-perl all 1.281-1 [97.5 kB] Get:38 http://deb.debian.org/debian unstable/main amd64 libdbi-perl amd64 1.643-4+b2 [755 kB] Get:39 http://deb.debian.org/debian unstable/main amd64 libdbd-sqlite3-perl amd64 1.74-1+b2 [175 kB] Get:40 http://deb.debian.org/debian unstable/main amd64 libfreezethaw-perl all 0.5001-3 [16.0 kB] Get:41 http://deb.debian.org/debian unstable/main amd64 libmodule-build-perl all 0.423400-2 [252 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 21.4 MB in 0s (128 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 20884 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-2_amd64.deb ... Unpacking bsdextrautils (2.40.2-2) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.7-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-2_amd64.deb ... Unpacking man-db (2.12.1-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.16_all.deb ... Unpacking libdebhelper-perl (13.16) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.191-2_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5_amd64.deb ... Unpacking libicu72:amd64 (72.1-5) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg-3+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg-3+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.16_all.deb ... Unpacking debhelper (13.16) ... Selecting previously unselected package libfakeroot:amd64. Preparing to unpack .../29-libfakeroot_1.35.1-1_amd64.deb ... Unpacking libfakeroot:amd64 (1.35.1-1) ... Selecting previously unselected package fakeroot. Preparing to unpack .../30-fakeroot_1.35.1-1_amd64.deb ... Unpacking fakeroot (1.35.1-1) ... Selecting previously unselected package libhtml-tagset-perl. Preparing to unpack .../31-libhtml-tagset-perl_3.24-1_all.deb ... Unpacking libhtml-tagset-perl (3.24-1) ... Selecting previously unselected package liburi-perl. Preparing to unpack .../32-liburi-perl_5.28-1_all.deb ... Unpacking liburi-perl (5.28-1) ... Selecting previously unselected package libhtml-parser-perl:amd64. Preparing to unpack .../33-libhtml-parser-perl_3.83-1_amd64.deb ... Unpacking libhtml-parser-perl:amd64 (3.83-1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../34-libcgi-pm-perl_4.66-1_all.deb ... Unpacking libcgi-pm-perl (4.66-1) ... Selecting previously unselected package libcgi-simple-perl. Preparing to unpack .../35-libcgi-simple-perl_1.281-1_all.deb ... Unpacking libcgi-simple-perl (1.281-1) ... Selecting previously unselected package libdbi-perl:amd64. Preparing to unpack .../36-libdbi-perl_1.643-4+b2_amd64.deb ... Unpacking libdbi-perl:amd64 (1.643-4+b2) ... Selecting previously unselected package libdbd-sqlite3-perl:amd64. Preparing to unpack .../37-libdbd-sqlite3-perl_1.74-1+b2_amd64.deb ... Unpacking libdbd-sqlite3-perl:amd64 (1.74-1+b2) ... Selecting previously unselected package libfreezethaw-perl. Preparing to unpack .../38-libfreezethaw-perl_0.5001-3_all.deb ... Unpacking libfreezethaw-perl (0.5001-3) ... Selecting previously unselected package libmodule-build-perl. Preparing to unpack .../39-libmodule-build-perl_0.423400-2_all.deb ... Adding 'diversion of /usr/bin/config_data to /usr/bin/config_data.diverted by libmodule-build-perl' Adding 'diversion of /usr/share/man/man1/config_data.1.gz to /usr/share/man/man1/config_data.diverted.1.gz by libmodule-build-perl' Unpacking libmodule-build-perl (0.423400-2) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../40-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.7-2) ... Setting up libicu72:amd64 (72.1-5) ... Setting up bsdextrautils (2.40.2-2) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libhtml-tagset-perl (3.24-1) ... Setting up libdebhelper-perl (13.16) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libfakeroot:amd64 (1.35.1-1) ... Setting up libelf1t64:amd64 (0.191-2) ... Setting up libmodule-build-perl (0.423400-2) ... Setting up libfreezethaw-perl (0.5001-3) ... Setting up fakeroot (1.35.1-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libcgi-simple-perl (1.281-1) ... Setting up libxml2:amd64 (2.12.7+dfsg-3+b1) ... Setting up liburi-perl (5.28-1) ... Setting up libdbi-perl:amd64 (1.643-4+b2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up libhtml-parser-perl:amd64 (3.83-1) ... Setting up libdbd-sqlite3-perl:amd64 (1.74-1+b2) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up libcgi-pm-perl (4.66-1) ... Setting up man-db (2.12.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.16) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.39-6) ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 6.9.7-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.9.7-1 (2024-06-27) amd64 (x86_64) Toolchain package versions: binutils_2.42.90.20240720-2 dpkg-dev_1.22.11 g++-13_13.3.0-4 g++-14_14.2.0-1 gcc-13_13.3.0-4 gcc-14_14.2.0-1 libc6-dev_2.39-6 libstdc++-13-dev_13.3.0-4 libstdc++-14-dev_14.2.0-1 libstdc++6_14.2.0-1 linux-libc-dev_6.9.12-1 Package versions: adduser_3.137 apt_2.9.7 autoconf_2.71-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.5 base-passwd_3.6.4 bash_5.2.21-2.1 binutils_2.42.90.20240720-2 binutils-common_2.42.90.20240720-2 binutils-x86-64-linux-gnu_2.42.90.20240720-2 bsdextrautils_2.40.2-2 bsdutils_1:2.40.2-2 build-essential_12.10 bzip2_1.0.8-5.1 coreutils_9.4-3.1 cpp_4:14.1.0-2 cpp-13_13.3.0-4 cpp-13-x86-64-linux-gnu_13.3.0-4 cpp-14_14.2.0-1 cpp-14-x86-64-linux-gnu_14.2.0-1 cpp-x86-64-linux-gnu_4:14.1.0-2 dash_0.5.12-9 debconf_1.5.87 debhelper_13.16 debian-archive-keyring_2023.4 debianutils_5.20 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffutils_1:3.10-1 dirmngr_2.2.43-8 dpkg_1.22.11 dpkg-dev_1.22.11 dwz_0.15-1+b1 eatmydata_131-2 fakeroot_1.35.1-1 file_1:5.45-3 findutils_4.10.0-2 g++_4:14.1.0-2 g++-13_13.3.0-4 g++-13-x86-64-linux-gnu_13.3.0-4 g++-14_14.2.0-1 g++-14-x86-64-linux-gnu_14.2.0-1 g++-x86-64-linux-gnu_4:14.1.0-2 gcc_4:14.1.0-2 gcc-13_13.3.0-4 gcc-13-base_13.3.0-4 gcc-13-x86-64-linux-gnu_13.3.0-4 gcc-14_14.2.0-1 gcc-14-base_14.2.0-1 gcc-14-x86-64-linux-gnu_14.2.0-1 gcc-x86-64-linux-gnu_4:14.1.0-2 gettext_0.22.5-2 gettext-base_0.22.5-2 gnupg_2.2.43-8 gnupg-l10n_2.2.43-8 gnupg-utils_2.2.43-8 gpg_2.2.43-8 gpg-agent_2.2.43-8 gpg-wks-client_2.2.43-8 gpgconf_2.2.43-8 gpgsm_2.2.43-8 gpgv_2.2.43-8 grep_3.11-4 groff-base_1.23.0-5 gzip_1.12-1.1 hostname_3.23+nmu2 init-system-helpers_1.66 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-2 libapt-pkg6.0t64_2.9.7 libarchive-zip-perl_1.68-1 libasan8_14.2.0-1 libassuan0_2.5.6-1+b1 libatomic1_14.2.0-1 libattr1_1:2.5.2-1 libaudit-common_1:3.1.2-4 libaudit1_1:3.1.2-4+b1 libbinutils_2.42.90.20240720-2 libblkid1_2.40.2-2 libbsd0_0.12.2-1 libbz2-1.0_1.0.8-5.1 libc-bin_2.39-6 libc-dev-bin_2.39-6 libc-l10n_2.39-6 libc6_2.39-6 libc6-dev_2.39-6 libcap-ng0_0.8.5-1+b1 libcap2_1:2.66-5 libcc1-0_14.2.0-1 libcgi-pm-perl_4.66-1 libcgi-simple-perl_1.281-1 libcrypt-dev_1:4.4.36-4 libcrypt1_1:4.4.36-4 libctf-nobfd0_2.42.90.20240720-2 libctf0_2.42.90.20240720-2 libdb5.3t64_5.3.28+dfsg2-7 libdbd-sqlite3-perl_1.74-1+b2 libdbi-perl_1.643-4+b2 libdebconfclient0_0.272 libdebhelper-perl_13.16 libdpkg-perl_1.22.11 libeatmydata1_131-2 libelf1t64_0.191-2 libfakeroot_1.35.1-1 libffi8_3.4.6-1 libfile-stripnondeterminism-perl_1.14.0-1 libfreezethaw-perl_0.5001-3 libgcc-13-dev_13.3.0-4 libgcc-14-dev_14.2.0-1 libgcc-s1_14.2.0-1 libgcrypt20_1.11.0-5 libgdbm-compat4t64_1.23-6 libgdbm6t64_1.23-6 libgmp10_2:6.3.0+dfsg-2+b1 libgnutls30t64_3.8.6-2 libgomp1_14.2.0-1 libgpg-error0_1.50-2 libgprofng0_2.42.90.20240720-2 libhogweed6t64_3.10-1 libhtml-parser-perl_3.83-1 libhtml-tagset-perl_3.24-1 libhwasan0_14.2.0-1 libicu72_72.1-5 libidn2-0_2.3.7-2 libisl23_0.26-3+b2 libitm1_14.2.0-1 libjansson4_2.14-2+b2 libksba8_1.6.7-2 libldap-2.5-0_2.5.18+dfsg-2 liblsan0_14.2.0-1 liblz4-1_1.9.4-3 liblzma5_5.6.2-2 libmagic-mgc_1:5.45-3 libmagic1t64_1:5.45-3 libmd0_1.1.0-2 libmodule-build-perl_0.423400-2 libmount1_2.40.2-2 libmpc3_1.3.1-1+b2 libmpfr6_4.2.1-1+b1 libncursesw6_6.5-2 libnettle8t64_3.10-1 libnpth0t64_1.6-3.1 libp11-kit0_0.25.5-2 libpam-modules_1.5.3-7 libpam-modules-bin_1.5.3-7 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7 libpcre2-8-0_10.42-4+b1 libperl5.38t64_5.38.2-5 libpipeline1_1.5.7-2 libquadmath0_14.2.0-1 libreadline8t64_8.2-4 libsasl2-2_2.1.28+dfsg1-6 libsasl2-modules-db_2.1.28+dfsg1-6 libseccomp2_2.5.5-1+b1 libselinux1_3.5-2+b3 libsemanage-common_3.5-1 libsemanage2_3.5-1+b4 libsepol2_3.5-2+b1 libsframe1_2.42.90.20240720-2 libsmartcols1_2.40.2-2 libsqlite3-0_3.46.0-1 libssl3t64_3.3.1-2 libstdc++-13-dev_13.3.0-4 libstdc++-14-dev_14.2.0-1 libstdc++6_14.2.0-1 libsystemd0_256.4-2 libtasn1-6_4.19.0-3+b2 libtinfo6_6.5-2 libtool_2.4.7-7 libtsan2_14.2.0-1 libubsan1_14.2.0-1 libuchardet0_0.0.8-1+b1 libudev1_256.4-2 libunistring5_1.2-1 liburi-perl_5.28-1 libuuid1_2.40.2-2 libxml2_2.12.7+dfsg-3+b1 libxxhash0_0.8.2-2+b1 libzstd1_1.5.6+dfsg-1 linux-libc-dev_6.9.12-1 locales-all_2.39-6 login_1:4.15.3-3 m4_1.4.19-4 make_4.3-4.1 man-db_2.12.1-2 mawk_1.3.4.20240622-2 ncurses-base_6.5-2 ncurses-bin_6.5-2 passwd_1:4.15.3-3 patch_2.7.6-7 perl_5.38.2-5 perl-base_5.38.2-5 perl-modules-5.38_5.38.2-5 pinentry-curses_1.2.1-3+b2 po-debconf_1.0.21+nmu1 readline-common_8.2-4 rpcsvc-proto_1.4.3-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2 sensible-utils_0.0.24 sysvinit-utils_3.09-2 tar_1.35+dfsg-3 usr-is-merged_39 util-linux_2.40.2-2 xz-utils_5.6.2-2 zlib1g_1:1.3.dfsg+really1.3.1-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libcgi-session-perl Binary: libcgi-session-perl Architecture: all Version: 4.48-4 Maintainer: Debian Perl Group Uploaders: Ansgar Burchardt , gregor herrmann Homepage: https://metacpan.org/release/CGI-Session Standards-Version: 3.9.6 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libcgi-session-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libcgi-session-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libmodule-build-perl Build-Depends-Indep: perl, libfreezethaw-perl, libcgi-pm-perl | perl (<< 5.19), libcgi-simple-perl, libdbi-perl, libdbd-sqlite3-perl Package-List: libcgi-session-perl deb perl optional arch=all Checksums-Sha1: 82dd630a11f2a0b01ea710c33225858718d99187 95291 libcgi-session-perl_4.48.orig.tar.gz 2f54d3e47708e5506f552cbfed1f3af25ed564fd 5708 libcgi-session-perl_4.48-4.debian.tar.xz Checksums-Sha256: 46756461c24ce7666b8108ddb96dbab612699df3012c80ef11016619fe1554f7 95291 libcgi-session-perl_4.48.orig.tar.gz 4ecc916d24dbca605328c2a10b3be439c5a116ffc4a7a98d1a309aefd994e2a5 5708 libcgi-session-perl_4.48-4.debian.tar.xz Files: 7f8983aaeb92a0ba77eca8bca6d8d43a 95291 libcgi-session-perl_4.48.orig.tar.gz 818636343066fb99b677d07ae8d3eaca 5708 libcgi-session-perl_4.48-4.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKjUKUACgkQV5wWDUye I+ghCBAAkiDz9zYYJfV3tnegFeU+uxZXZeo7dbOPlOfMP9ZibxsPajr0AQ/GNMoP 70EebpkY3slS74RF3FHnVAwWTszFl2lCjKWG6jA1SZTqMXMZh74PpDO+hi452sIj 0fzmACUr4UdeZulEkblZG7QElmi3IE/HJ0SHYdlvqaPSEJqwdWJ1fGjRZQ0XF6pW 5DWuIT4tTx9WxXqi9buq4dLHjHqRzNAp7kklwYU6dOma37e5qEmLfAN6a/xP94Hx XTt7HIdcEdYILJjpCBQJnfSZ+88AmNmRDImvMrnBHk7RPDBgGTJF3YY51sWyHoHM ITp7ar8Cx/vsBdQUUdrJUM5Vs7AZbdKVwD/ts5l6wXLLFN9rr5d26KXjXRJFslLK eTrOxKd96HP6rTv+YhH+hFK7x1ooHOkVLaZIGj+8ZlUnt7rG/szu0TASVvaQOGBg ezIgw6omMBYFoemTeyTsbIskINjitZbNV1PMfGfFqR+fS+TyBDYz5UiaPLwwTQBi 0oBQ6BDpGXAEdCmnzrpvJY3rX7MATeK8yLVEKE9eTb034WZBvjTfq1LQlx2XFT0+ E7NWtIlOs0xfUmlQu3CzATJuA2IjvqP8022EEY3RvtoD7GoqfT2TUC845hMbVmyF 0pQXnTyGCD5AzynkFCqholUp0bEij+VRfNGGkA2pQMMWczyHH8k= =c41A -----END PGP SIGNATURE----- gpgv: Signature made Fri Jun 10 14:09:41 2022 UTC gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libcgi-session-perl_4.48-4.dsc: no acceptable signature found dpkg-source: info: extracting libcgi-session-perl in /<> dpkg-source: info: unpacking libcgi-session-perl_4.48.orig.tar.gz dpkg-source: info: unpacking libcgi-session-perl_4.48-4.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-Untaint-raw-data-coming-from-session-storage-backend.patch Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Timed Build Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libcgi-session-perl_4.48-4 sid amd64 ----------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libcgi-session-perl_4.48-4 sid amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANG=en_GB.UTF-8 LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=sid-amd64-debomatic SCHROOT_CHROOT_NAME=sid-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=sid-amd64-debomatic-15d7f0f1-e8d7-4b9c-be29-39bff5008e61 SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -rfakeroot -Zxz dpkg-buildpackage: info: source package libcgi-session-perl dpkg-buildpackage: info: source version 4.48-4 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean dh clean debian/rules override_dh_clean make[1]: Entering directory '/<>' dh_clean rm -rf t/sessiondata make[1]: Leaving directory '/<>' dpkg-source -Zxz -b . dpkg-source: info: using source format '3.0 (quilt)' dpkg-source: info: building libcgi-session-perl using existing ./libcgi-session-perl_4.48.orig.tar.gz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: building libcgi-session-perl in libcgi-session-perl_4.48-4.debian.tar.xz dpkg-source: info: building libcgi-session-perl in libcgi-session-perl_4.48-4.dsc debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Build.PL --installdirs vendor --config "optimize=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" ---------------------------------------- #### WARNING #### If you are using custom CGI::Session drivers they may not be compatible with the current driver specifications. You will need to make some changes to your drivers' code before proceeding with this installation to make it compatible with CGI::Session 4.x. Fortunately, current driver specifications are a lot easier to adapt to. Should you have any assistance re-coding your current drivers, please let me know. Current driver specs are documented in CGI/Session/Driver.pm #### TESTING ##### You are encouraged to run tests for the backend you will be using. The database backends that need a customized connection string won't run by default. To run them, some environment variables must be set. The simplest method is to use the standard "DBI_DSN/DBI_USER/DBI_PASS" environment variables. Otherwise, you can set these variables: For PostgreSQL: CGISESS_PG_DSN CGISESS_PG_USER CGISESS_PG_PASS For MySQL: CGISESS_MYSQL_DSN CGISESS_MYSQL_USER CGISESS_MYSQL_PASS CGISESS_MYSQL_SOCKET ---------------------------------------- Warning: Module::Metadata::Changes's ini.report.pl failed to generate or update Changelog.ini. ---------------------------------------- WARNING: the following files are missing in your kit: MYMETA.json Please inform the author. Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'CGI-Session' version '4.48' dh_auto_build /usr/bin/perl Build Building CGI-Session dh_auto_test /usr/bin/perl Build test --verbose 1 t/api3_db_file.t ................ 1..14 ok 1 - use CGI::Session; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 - session ID in new session matches original ID ok 12 - found email via param ok 13 - found author via param ok 14 - expire() returns true value ok t/api3_db_file_freezethaw.t ..... 1..14 ok 1 - use CGI::Session; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok t/api3_db_file_storable.t ....... 1..14 ok 1 - use CGI::Session; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok t/api3_db_file_storable_incr.t .. 1..15 ok 1 - use File::Spec; ok 2 - use CGI::Session; ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok t/api3_file.t ................... 1..17 ok 1 - use CGI::Session; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 - found email param in session ok 13 - found author param in session ok 14 ok 15 - $s->clear("name") survives eval ok 16 - email param is cleared from session ok 17 - author param is still in session ok t/api3_file_freezethaw.t ........ 1..14 ok 1 - use CGI::Session; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok t/api3_file_freezethaw_incr.t ... 1..15 ok 1 - use File::Spec; ok 2 - use CGI::Session; ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok t/api3_file_storable.t .......... 1..14 ok 1 - use CGI::Session; ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok t/api3_file_storable_incr.t ..... 1..15 ok 1 - use File::Spec; ok 2 - use CGI::Session; ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok t/api3_incr.t ................... 1..14 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok #Using FreezeThaw as object serializer t/api3_obj_store.t .............. 1..8 ok ok ok ok ok ok ok ok ok t/api3_obj_store_db_file.t ...... 1..8 ok ok ok ok ok ok ok ok ok t/bug21952.t .................... ok 1 - use CGI; ok 2 - use CGI::Session; ok 3 - use CGI::Session::Driver; ok 4 - use CGI::Session::Driver::file; ok 5 - $opt_dsn is HASH ok 6 ok 7 ok 8 - $opt_dsn is HASH ok 9 - Session object is no longer available ok 10 - $opt_dsn still exists ok 11 - $opt_dsn is still a hashref 1..11 ok t/bug24285.t .................... ok 1 - Created CGI::Session object successfully ok 2 - Created file outside /tmp successfully 1..2 ok t/cgi_simple.t .................. ok 1 - survives eval ok 2 - CGI::Simple object is accepted when passed to new() ok 3 - cookie() method works with CGI::Simple ok 4 - http_header() method works with CGI::Simple 1..4 ok t/complex_ds.t .................. 1..10 ok 1 ok 2 ok 3 ok 4 - Test 1 ok 5 - Test 2 ok 6 - Bir ok 7 ok 8 - Test 1 ok 9 - Test 2 ok 10 - Bir ok t/driver_dbi.t .................. ok 1 - use CGI::Session::Driver::DBI; ok 2 - retrieve returns expected failure message when no session id is given ok 3 - traverse returns expected failure message when no session id is given 1..3 ok t/expire.t ...................... ok 1 - undef is returned if nothing has been set yet. ok 2 - basic set/get check ok 3 - negative set/get check ok 4 - zero cancels expiration ok 5 - setting expiration for a single param works ok 6 - zero expires parameters 1..6 ok # The found session has been deleted and flushed t/find.t ........................ 1..7 ok 1 - The test session has been created ok 2 - The test session's id has been set ok 3 - The test session's parameter called 'purpose' has been set ok 4 - 'CGI::Session::find() found a session whose class' isa 'CGI::Session' ok 5 - The found session's param called 'purpose' has a true value ok 6 - The found session's param called 'purpose' has the expected value ok 7 - find() returned no errors ok t/flush.t ....................... ok 1 - found session id ok 2 - found session data file 1..2 ok t/g4.t .......................... 1..101 ok 1 - use CGI::Session; ok 2 - === 1 === ok 3 - empty session should be created ok 4 - Id is empty ok 5 - Session is empty ok 6 - Session is not expired ok 7 - Session created successfully! ok 8 - ok 9 - ctime & atime are set ok 10 - ctime == atime ok 11 - etime not set yet ok 12 - session id is 598e2c56b37222d9c9018ab57a3da8a8 ok 13 - session holds 3 params3 ok 14 - My name's correct! ok 15 - 'emails' holds list of values ok 16 - 'emails' holds list of two values ok 17 - first value of 'emails' is correct! ok 18 - second value of 'emails' is correct! ok 19 - 'blogs' holds a hash ok 20 - first blog is correct ok 21 - second blog is correct ok 22 - === 2 === ok 23 - survived eval without error. ok 24 - Session was retrieved successfully ok 25 - session isn't expired yet ok 26 - session IDs are consistent ok 27 - ctime should be older than atime ok 28 - etime shouldn't be set yet ok 29 - session should hold params ok 30 - my name's correct ok 31 - 'emails' should hold list of values ok 32 - 'emails' should hold list of two values ok 33 - first value is correct! ok 34 - second value is correct! ok 35 - 'blogs' holds a hash ok 36 - first blog is correct! ok 37 - second blog is correct! ok 38 - etime set to 1 second ok 39 - etime set to one minute ok 40 - etime set to two hours ok 41 - etime set to 5 days ok 42 - etime set to 10 seconds in the past ok 43 - etime set back to one second ok 44 - calling close method survives eval ok 45 - === 3 === ok 46 - Session instance loaded ok 47 - session doesn't have ID ok 48 - session is empty, which is the same as above ok 49 - session was expired ok 50 - session data cleared ok 51 - new session created ok 52 - session has id :7b3a2d47f45740dd08c7eb3c4e8010c8 ok 53 - session isn't expired ok 54 - session isn't empty ok 55 - access and creation times are same ok 56 - it's a completely different session than above ok 57 - === 4 === ok 58 - Session '7b3a2d47f45740dd08c7eb3c4e8010c8' removed from datastore successfully ok 59 - session object created successfully ok 60 - claimed ID (7b3a2d47f45740dd08c7eb3c4e8010c8) couldn't be recovered. New ID is: 5ad9217e60c78a6d9eb48469b97e87f8 ok 61 - === 5 === ok 62 - Session object created successfully ok 63 - claimed id (5ad9217e60c78a6d9eb48469b97e87f8) was recovered successfully! ok 64 - === 6 === ok 65 - Session object created successfully ok 66 - New object created, because previous object was deleted ok 67 - CGI::Session::Test::SimpleObjectClass created successfully ok 68 ok 69 ok 70 ok 71 - OverloadedClass created successfully ok 72 - OverloadedClass is properly overloaded ok 73 - OverloadedClass is an object ok 74 ok 75 - CGI::Session::Test::SimpleObjectClass created successfully ok 76 - First element of anonymous array undef ok 77 ok 78 ok 79 ok 80 ok 81 - Overloaded objects have matching addresses ok 82 - === 7 === ok 83 - Session object created successfully ok 84 - Previously stored object loaded successfully ok 85 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 86 - ok 87 - ok 88 - ok 89 - ok 90 ok 91 - Object is still overloaded ok 92 - Object is really overloaded ok 93 - First element of anonymous array undef ok 94 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 95 - ok 96 - ok 97 - ok 98 - ok 99 ok 100 - Object is really overloaded ok 101 - Overloaded objects have matching addresses ok t/g4_dbfile.t ................... 1..101 ok 1 - use CGI::Session; ok 2 - === 1 === ok 3 - empty session should be created ok 4 - Id is empty ok 5 - Session is empty ok 6 - Session is not expired ok 7 - Session created successfully! ok 8 - ok 9 - ctime & atime are set ok 10 - ctime == atime ok 11 - etime not set yet ok 12 - session id is c86fde491480cdc52e2c02ad3f91ab56 ok 13 - session holds 3 params3 ok 14 - My name's correct! ok 15 - 'emails' holds list of values ok 16 - 'emails' holds list of two values ok 17 - first value of 'emails' is correct! ok 18 - second value of 'emails' is correct! ok 19 - 'blogs' holds a hash ok 20 - first blog is correct ok 21 - second blog is correct ok 22 - === 2 === ok 23 - survived eval without error. ok 24 - Session was retrieved successfully ok 25 - session isn't expired yet ok 26 - session IDs are consistent ok 27 - ctime should be older than atime ok 28 - etime shouldn't be set yet ok 29 - session should hold params ok 30 - my name's correct ok 31 - 'emails' should hold list of values ok 32 - 'emails' should hold list of two values ok 33 - first value is correct! ok 34 - second value is correct! ok 35 - 'blogs' holds a hash ok 36 - first blog is correct! ok 37 - second blog is correct! ok 38 - etime set to 1 second ok 39 - etime set to one minute ok 40 - etime set to two hours ok 41 - etime set to 5 days ok 42 - etime set to 10 seconds in the past ok 43 - etime set back to one second ok 44 - calling close method survives eval ok 45 - === 3 === ok 46 - Session instance loaded ok 47 - session doesn't have ID ok 48 - session is empty, which is the same as above ok 49 - session was expired ok 50 - session data cleared ok 51 - new session created ok 52 - session has id :c96e991648784322a0e45f1594cc0908 ok 53 - session isn't expired ok 54 - session isn't empty ok 55 - access and creation times are same ok 56 - it's a completely different session than above ok 57 - === 4 === ok 58 - Session 'c96e991648784322a0e45f1594cc0908' removed from datastore successfully ok 59 - session object created successfully ok 60 - claimed ID (c96e991648784322a0e45f1594cc0908) couldn't be recovered. New ID is: cebe18f93239535a856806ee3ccdb51a ok 61 - === 5 === ok 62 - Session object created successfully ok 63 - claimed id (cebe18f93239535a856806ee3ccdb51a) was recovered successfully! ok 64 - === 6 === ok 65 - Session object created successfully ok 66 - New object created, because previous object was deleted ok 67 - CGI::Session::Test::SimpleObjectClass created successfully ok 68 ok 69 ok 70 ok 71 - OverloadedClass created successfully ok 72 - OverloadedClass is properly overloaded ok 73 - OverloadedClass is an object ok 74 ok 75 - CGI::Session::Test::SimpleObjectClass created successfully ok 76 - First element of anonymous array undef ok 77 ok 78 ok 79 ok 80 ok 81 - Overloaded objects have matching addresses ok 82 - === 7 === ok 83 - Session object created successfully ok 84 - Previously stored object loaded successfully ok 85 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 86 - ok 87 - ok 88 - ok 89 - ok 90 ok 91 - Object is still overloaded ok 92 - Object is really overloaded ok 93 - First element of anonymous array undef ok 94 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 95 - ok 96 - ok 97 - ok 98 - ok 99 ok 100 - Object is really overloaded ok 101 - Overloaded objects have matching addresses ok t/g4_dbfile_freezethaw.t ........ 1..101 ok 1 - use CGI::Session; ok 2 - === 1 === ok 3 - empty session should be created ok 4 - Id is empty ok 5 - Session is empty ok 6 - Session is not expired ok 7 - Session created successfully! ok 8 - ok 9 - ctime & atime are set ok 10 - ctime == atime ok 11 - etime not set yet ok 12 - session id is 4e2da9ca1db4aacd0ade7d7fe88d70f9 ok 13 - session holds 3 params3 ok 14 - My name's correct! ok 15 - 'emails' holds list of values ok 16 - 'emails' holds list of two values ok 17 - first value of 'emails' is correct! ok 18 - second value of 'emails' is correct! ok 19 - 'blogs' holds a hash ok 20 - first blog is correct ok 21 - second blog is correct ok 22 - === 2 === ok 23 - survived eval without error. ok 24 - Session was retrieved successfully ok 25 - session isn't expired yet ok 26 - session IDs are consistent ok 27 - ctime should be older than atime ok 28 - etime shouldn't be set yet ok 29 - session should hold params ok 30 - my name's correct ok 31 - 'emails' should hold list of values ok 32 - 'emails' should hold list of two values ok 33 - first value is correct! ok 34 - second value is correct! ok 35 - 'blogs' holds a hash ok 36 - first blog is correct! ok 37 - second blog is correct! ok 38 - etime set to 1 second ok 39 - etime set to one minute ok 40 - etime set to two hours ok 41 - etime set to 5 days ok 42 - etime set to 10 seconds in the past ok 43 - etime set back to one second ok 44 - calling close method survives eval ok 45 - === 3 === ok 46 - Session instance loaded ok 47 - session doesn't have ID ok 48 - session is empty, which is the same as above ok 49 - session was expired ok 50 - session data cleared ok 51 - new session created ok 52 - session has id :cee31fc95957bc6b8d9f5f95f58fe0c7 ok 53 - session isn't expired ok 54 - session isn't empty ok 55 - access and creation times are same ok 56 - it's a completely different session than above ok 57 - === 4 === ok 58 - Session 'cee31fc95957bc6b8d9f5f95f58fe0c7' removed from datastore successfully ok 59 - session object created successfully ok 60 - claimed ID (cee31fc95957bc6b8d9f5f95f58fe0c7) couldn't be recovered. New ID is: 80c3c0641a0f78959b55afa66f4d3aff ok 61 - === 5 === ok 62 - Session object created successfully ok 63 - claimed id (80c3c0641a0f78959b55afa66f4d3aff) was recovered successfully! ok 64 - === 6 === ok 65 - Session object created successfully ok 66 - New object created, because previous object was deleted ok 67 - CGI::Session::Test::SimpleObjectClass created successfully ok 68 ok 69 ok 70 ok 71 - OverloadedClass created successfully ok 72 - OverloadedClass is properly overloaded ok 73 - OverloadedClass is an object ok 74 ok 75 - CGI::Session::Test::SimpleObjectClass created successfully ok 76 - First element of anonymous array undef ok 77 ok 78 ok 79 ok 80 ok 81 - Overloaded objects have matching addresses ok 82 - === 7 === ok 83 - Session object created successfully ok 84 - Previously stored object loaded successfully ok 85 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 86 - ok 87 - ok 88 - ok 89 - ok 90 ok 91 - Object is still overloaded ok 92 - Object is really overloaded ok 93 - First element of anonymous array undef ok 94 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 95 - ok 96 - ok 97 - ok 98 - ok 99 ok 100 - Object is really overloaded ok 101 - Overloaded objects have matching addresses ok t/g4_dbfile_storable.t .......... 1..101 ok 1 - use CGI::Session; ok 2 - === 1 === ok 3 - empty session should be created ok 4 - Id is empty ok 5 - Session is empty ok 6 - Session is not expired ok 7 - Session created successfully! ok 8 - ok 9 - ctime & atime are set ok 10 - ctime == atime ok 11 - etime not set yet ok 12 - session id is cff9db0b90dbfebdbd1ca8c982a8596b ok 13 - session holds 3 params3 ok 14 - My name's correct! ok 15 - 'emails' holds list of values ok 16 - 'emails' holds list of two values ok 17 - first value of 'emails' is correct! ok 18 - second value of 'emails' is correct! ok 19 - 'blogs' holds a hash ok 20 - first blog is correct ok 21 - second blog is correct ok 22 - === 2 === ok 23 - survived eval without error. ok 24 - Session was retrieved successfully ok 25 - session isn't expired yet ok 26 - session IDs are consistent ok 27 - ctime should be older than atime ok 28 - etime shouldn't be set yet ok 29 - session should hold params ok 30 - my name's correct ok 31 - 'emails' should hold list of values ok 32 - 'emails' should hold list of two values ok 33 - first value is correct! ok 34 - second value is correct! ok 35 - 'blogs' holds a hash ok 36 - first blog is correct! ok 37 - second blog is correct! ok 38 - etime set to 1 second ok 39 - etime set to one minute ok 40 - etime set to two hours ok 41 - etime set to 5 days ok 42 - etime set to 10 seconds in the past ok 43 - etime set back to one second ok 44 - calling close method survives eval ok 45 - === 3 === ok 46 - Session instance loaded ok 47 - session doesn't have ID ok 48 - session is empty, which is the same as above ok 49 - session was expired ok 50 - session data cleared ok 51 - new session created ok 52 - session has id :7c0483c8c32127d2ef305ba01945ccfa ok 53 - session isn't expired ok 54 - session isn't empty ok 55 - access and creation times are same ok 56 - it's a completely different session than above ok 57 - === 4 === ok 58 - Session '7c0483c8c32127d2ef305ba01945ccfa' removed from datastore successfully ok 59 - session object created successfully ok 60 - claimed ID (7c0483c8c32127d2ef305ba01945ccfa) couldn't be recovered. New ID is: d31de922f1155cb9e94e7f6997e372f4 ok 61 - === 5 === ok 62 - Session object created successfully ok 63 - claimed id (d31de922f1155cb9e94e7f6997e372f4) was recovered successfully! ok 64 - === 6 === ok 65 - Session object created successfully ok 66 - New object created, because previous object was deleted ok 67 - CGI::Session::Test::SimpleObjectClass created successfully ok 68 ok 69 ok 70 ok 71 - OverloadedClass created successfully ok 72 - OverloadedClass is properly overloaded ok 73 - OverloadedClass is an object ok 74 ok 75 - CGI::Session::Test::SimpleObjectClass created successfully ok 76 - First element of anonymous array undef ok 77 ok 78 ok 79 ok 80 ok 81 - Overloaded objects have matching addresses ok 82 - === 7 === ok 83 - Session object created successfully ok 84 - Previously stored object loaded successfully ok 85 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 86 - ok 87 - ok 88 - ok 89 - ok 90 ok 91 - Object is still overloaded ok 92 - Object is really overloaded ok 93 - First element of anonymous array undef ok 94 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 95 - ok 96 - ok 97 - ok 98 - ok 99 ok 100 - Object is really overloaded ok 101 - Overloaded objects have matching addresses ok t/g4_freezethaw.t ............... 1..101 ok 1 - use CGI::Session; ok 2 - === 1 === ok 3 - empty session should be created ok 4 - Id is empty ok 5 - Session is empty ok 6 - Session is not expired ok 7 - Session created successfully! ok 8 - ok 9 - ctime & atime are set ok 10 - ctime == atime ok 11 - etime not set yet ok 12 - session id is dd00f813a1492fd6582449e0bc497469 ok 13 - session holds 3 params3 ok 14 - My name's correct! ok 15 - 'emails' holds list of values ok 16 - 'emails' holds list of two values ok 17 - first value of 'emails' is correct! ok 18 - second value of 'emails' is correct! ok 19 - 'blogs' holds a hash ok 20 - first blog is correct ok 21 - second blog is correct ok 22 - === 2 === ok 23 - survived eval without error. ok 24 - Session was retrieved successfully ok 25 - session isn't expired yet ok 26 - session IDs are consistent ok 27 - ctime should be older than atime ok 28 - etime shouldn't be set yet ok 29 - session should hold params ok 30 - my name's correct ok 31 - 'emails' should hold list of values ok 32 - 'emails' should hold list of two values ok 33 - first value is correct! ok 34 - second value is correct! ok 35 - 'blogs' holds a hash ok 36 - first blog is correct! ok 37 - second blog is correct! ok 38 - etime set to 1 second ok 39 - etime set to one minute ok 40 - etime set to two hours ok 41 - etime set to 5 days ok 42 - etime set to 10 seconds in the past ok 43 - etime set back to one second ok 44 - calling close method survives eval ok 45 - === 3 === ok 46 - Session instance loaded ok 47 - session doesn't have ID ok 48 - session is empty, which is the same as above ok 49 - session was expired ok 50 - session data cleared ok 51 - new session created ok 52 - session has id :d578856e9af5acc34879afbed44b44ea ok 53 - session isn't expired ok 54 - session isn't empty ok 55 - access and creation times are same ok 56 - it's a completely different session than above ok 57 - === 4 === ok 58 - Session 'd578856e9af5acc34879afbed44b44ea' removed from datastore successfully ok 59 - session object created successfully ok 60 - claimed ID (d578856e9af5acc34879afbed44b44ea) couldn't be recovered. New ID is: ea9decd0afc6910da624fdb51834d3a0 ok 61 - === 5 === ok 62 - Session object created successfully ok 63 - claimed id (ea9decd0afc6910da624fdb51834d3a0) was recovered successfully! ok 64 - === 6 === ok 65 - Session object created successfully ok 66 - New object created, because previous object was deleted ok 67 - CGI::Session::Test::SimpleObjectClass created successfully ok 68 ok 69 ok 70 ok 71 - OverloadedClass created successfully ok 72 - OverloadedClass is properly overloaded ok 73 - OverloadedClass is an object ok 74 ok 75 - CGI::Session::Test::SimpleObjectClass created successfully ok 76 - First element of anonymous array undef ok 77 ok 78 ok 79 ok 80 ok 81 - Overloaded objects have matching addresses ok 82 - === 7 === ok 83 - Session object created successfully ok 84 - Previously stored object loaded successfully ok 85 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 86 - ok 87 - ok 88 - ok 89 - ok 90 ok 91 - Object is still overloaded ok 92 - Object is really overloaded ok 93 - First element of anonymous array undef ok 94 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 95 - ok 96 - ok 97 - ok 98 - ok 99 ok 100 - Object is really overloaded ok 101 - Overloaded objects have matching addresses ok t/g4_mysql.t .................... skipped: DBD::mysql is NOT available t/g4_mysql_freezethaw.t ......... skipped: DBD::mysql is NOT available t/g4_mysql_storable.t ........... skipped: DBD::mysql is NOT available t/g4_postgresql.t ............... skipped: DataSource is not known t/g4_postgresql_freezethaw.t .... skipped: DataSource is not known t/g4_postgresql_storable.t ...... skipped: DataSource is not known t/g4_sqlite.t ................... 1..105 ok 1 - Correct information has been saved in the session... ok 2 - Only one copy of the session file... ok 3 - Information is retrieved from past session alright... ok 4 - Still only one copy of the session... ok 5 - use CGI::Session; ok 6 - === 1 === ok 7 - empty session should be created ok 8 - Id is empty ok 9 - Session is empty ok 10 - Session is not expired ok 11 - Session created successfully! ok 12 - ok 13 - ctime & atime are set ok 14 - ctime == atime ok 15 - etime not set yet ok 16 - session id is bfb6a2f18b2fbfb371717a732485bf3c ok 17 - session holds 3 params3 ok 18 - My name's correct! ok 19 - 'emails' holds list of values ok 20 - 'emails' holds list of two values ok 21 - first value of 'emails' is correct! ok 22 - second value of 'emails' is correct! ok 23 - 'blogs' holds a hash ok 24 - first blog is correct ok 25 - second blog is correct ok 26 - === 2 === ok 27 - survived eval without error. ok 28 - Session was retrieved successfully ok 29 - session isn't expired yet ok 30 - session IDs are consistent ok 31 - ctime should be older than atime ok 32 - etime shouldn't be set yet ok 33 - session should hold params ok 34 - my name's correct ok 35 - 'emails' should hold list of values ok 36 - 'emails' should hold list of two values ok 37 - first value is correct! ok 38 - second value is correct! ok 39 - 'blogs' holds a hash ok 40 - first blog is correct! ok 41 - second blog is correct! ok 42 - etime set to 1 second ok 43 - etime set to one minute ok 44 - etime set to two hours ok 45 - etime set to 5 days ok 46 - etime set to 10 seconds in the past ok 47 - etime set back to one second ok 48 - calling close method survives eval ok 49 - === 3 === ok 50 - Session instance loaded ok 51 - session doesn't have ID ok 52 - session is empty, which is the same as above ok 53 - session was expired ok 54 - session data cleared ok 55 - new session created ok 56 - session has id :ad0f71a7ede09235f802d80e33e9544f ok 57 - session isn't expired ok 58 - session isn't empty ok 59 - access and creation times are same ok 60 - it's a completely different session than above ok 61 - === 4 === ok 62 - Session 'ad0f71a7ede09235f802d80e33e9544f' removed from datastore successfully ok 63 - session object created successfully ok 64 - claimed ID (ad0f71a7ede09235f802d80e33e9544f) couldn't be recovered. New ID is: 70baaef7c84339be10ea36f25e3a274d ok 65 - === 5 === ok 66 - Session object created successfully ok 67 - claimed id (70baaef7c84339be10ea36f25e3a274d) was recovered successfully! ok 68 - === 6 === ok 69 - Session object created successfully ok 70 - New object created, because previous object was deleted ok 71 - CGI::Session::Test::SimpleObjectClass created successfully ok 72 ok 73 ok 74 ok 75 - OverloadedClass created successfully ok 76 - OverloadedClass is properly overloaded ok 77 - OverloadedClass is an object ok 78 ok 79 - CGI::Session::Test::SimpleObjectClass created successfully ok 80 - First element of anonymous array undef ok 81 ok 82 ok 83 ok 84 ok 85 - Overloaded objects have matching addresses ok 86 - === 7 === ok 87 - Session object created successfully ok 88 - Previously stored object loaded successfully ok 89 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 90 - ok 91 - ok 92 - ok 93 - ok 94 ok 95 - Object is still overloaded ok 96 - Object is really overloaded ok 97 - First element of anonymous array undef ok 98 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 99 - ok 100 - ok 101 - ok 102 - ok 103 ok 104 - Object is really overloaded ok 105 - Overloaded objects have matching addresses ok t/g4_sqlite_freezethaw.t ........ 1..101 ok 1 - use CGI::Session; ok 2 - === 1 === ok 3 - empty session should be created ok 4 - Id is empty ok 5 - Session is empty ok 6 - Session is not expired ok 7 - Session created successfully! ok 8 - ok 9 - ctime & atime are set ok 10 - ctime == atime ok 11 - etime not set yet ok 12 - session id is 60a81a44ecce4ff3cd8d23c7ff86d227 ok 13 - session holds 3 params3 ok 14 - My name's correct! ok 15 - 'emails' holds list of values ok 16 - 'emails' holds list of two values ok 17 - first value of 'emails' is correct! ok 18 - second value of 'emails' is correct! ok 19 - 'blogs' holds a hash ok 20 - first blog is correct ok 21 - second blog is correct ok 22 - === 2 === ok 23 - survived eval without error. ok 24 - Session was retrieved successfully ok 25 - session isn't expired yet ok 26 - session IDs are consistent ok 27 - ctime should be older than atime ok 28 - etime shouldn't be set yet ok 29 - session should hold params ok 30 - my name's correct ok 31 - 'emails' should hold list of values ok 32 - 'emails' should hold list of two values ok 33 - first value is correct! ok 34 - second value is correct! ok 35 - 'blogs' holds a hash ok 36 - first blog is correct! ok 37 - second blog is correct! ok 38 - etime set to 1 second ok 39 - etime set to one minute ok 40 - etime set to two hours ok 41 - etime set to 5 days ok 42 - etime set to 10 seconds in the past ok 43 - etime set back to one second ok 44 - calling close method survives eval ok 45 - === 3 === ok 46 - Session instance loaded ok 47 - session doesn't have ID ok 48 - session is empty, which is the same as above ok 49 - session was expired ok 50 - session data cleared ok 51 - new session created ok 52 - session has id :e627ce8258c0dd2393b8c6ccb35c0318 ok 53 - session isn't expired ok 54 - session isn't empty ok 55 - access and creation times are same ok 56 - it's a completely different session than above ok 57 - === 4 === ok 58 - Session 'e627ce8258c0dd2393b8c6ccb35c0318' removed from datastore successfully ok 59 - session object created successfully ok 60 - claimed ID (e627ce8258c0dd2393b8c6ccb35c0318) couldn't be recovered. New ID is: db903046525ea6ee61885267ed3e01f4 ok 61 - === 5 === ok 62 - Session object created successfully ok 63 - claimed id (db903046525ea6ee61885267ed3e01f4) was recovered successfully! ok 64 - === 6 === ok 65 - Session object created successfully ok 66 - New object created, because previous object was deleted ok 67 - CGI::Session::Test::SimpleObjectClass created successfully ok 68 ok 69 ok 70 ok 71 - OverloadedClass created successfully ok 72 - OverloadedClass is properly overloaded ok 73 - OverloadedClass is an object ok 74 ok 75 - CGI::Session::Test::SimpleObjectClass created successfully ok 76 - First element of anonymous array undef ok 77 ok 78 ok 79 ok 80 ok 81 - Overloaded objects have matching addresses ok 82 - === 7 === ok 83 - Session object created successfully ok 84 - Previously stored object loaded successfully ok 85 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 86 - ok 87 - ok 88 - ok 89 - ok 90 ok 91 - Object is still overloaded ok 92 - Object is really overloaded ok 93 - First element of anonymous array undef ok 94 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 95 - ok 96 - ok 97 - ok 98 - ok 99 ok 100 - Object is really overloaded ok 101 - Overloaded objects have matching addresses ok t/g4_sqlite_storable.t .......... 1..101 ok 1 - use CGI::Session; ok 2 - === 1 === ok 3 - empty session should be created ok 4 - Id is empty ok 5 - Session is empty ok 6 - Session is not expired ok 7 - Session created successfully! ok 8 - ok 9 - ctime & atime are set ok 10 - ctime == atime ok 11 - etime not set yet ok 12 - session id is 48baab3173e7b29f0b66b25847f79f19 ok 13 - session holds 3 params3 ok 14 - My name's correct! ok 15 - 'emails' holds list of values ok 16 - 'emails' holds list of two values ok 17 - first value of 'emails' is correct! ok 18 - second value of 'emails' is correct! ok 19 - 'blogs' holds a hash ok 20 - first blog is correct ok 21 - second blog is correct ok 22 - === 2 === ok 23 - survived eval without error. ok 24 - Session was retrieved successfully ok 25 - session isn't expired yet ok 26 - session IDs are consistent ok 27 - ctime should be older than atime ok 28 - etime shouldn't be set yet ok 29 - session should hold params ok 30 - my name's correct ok 31 - 'emails' should hold list of values ok 32 - 'emails' should hold list of two values ok 33 - first value is correct! ok 34 - second value is correct! ok 35 - 'blogs' holds a hash ok 36 - first blog is correct! ok 37 - second blog is correct! ok 38 - etime set to 1 second ok 39 - etime set to one minute ok 40 - etime set to two hours ok 41 - etime set to 5 days ok 42 - etime set to 10 seconds in the past ok 43 - etime set back to one second ok 44 - calling close method survives eval ok 45 - === 3 === ok 46 - Session instance loaded ok 47 - session doesn't have ID ok 48 - session is empty, which is the same as above ok 49 - session was expired ok 50 - session data cleared ok 51 - new session created ok 52 - session has id :3377c387d5db0bc62185e5686e9244bd ok 53 - session isn't expired ok 54 - session isn't empty ok 55 - access and creation times are same ok 56 - it's a completely different session than above ok 57 - === 4 === ok 58 - Session '3377c387d5db0bc62185e5686e9244bd' removed from datastore successfully ok 59 - session object created successfully ok 60 - claimed ID (3377c387d5db0bc62185e5686e9244bd) couldn't be recovered. New ID is: 553f3043db76b63d65f6cbfd0bbbf150 ok 61 - === 5 === ok 62 - Session object created successfully ok 63 - claimed id (553f3043db76b63d65f6cbfd0bbbf150) was recovered successfully! ok 64 - === 6 === ok 65 - Session object created successfully ok 66 - New object created, because previous object was deleted ok 67 - CGI::Session::Test::SimpleObjectClass created successfully ok 68 ok 69 ok 70 ok 71 - OverloadedClass created successfully ok 72 - OverloadedClass is properly overloaded ok 73 - OverloadedClass is an object ok 74 ok 75 - CGI::Session::Test::SimpleObjectClass created successfully ok 76 - First element of anonymous array undef ok 77 ok 78 ok 79 ok 80 ok 81 - Overloaded objects have matching addresses ok 82 - === 7 === ok 83 - Session object created successfully ok 84 - Previously stored object loaded successfully ok 85 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 86 - ok 87 - ok 88 - ok 89 - ok 90 ok 91 - Object is still overloaded ok 92 - Object is really overloaded ok 93 - First element of anonymous array undef ok 94 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 95 - ok 96 - ok 97 - ok 98 - ok 99 ok 100 - Object is really overloaded ok 101 - Overloaded objects have matching addresses ok t/g4_storable.t ................. 1..101 ok 1 - use CGI::Session; ok 2 - === 1 === ok 3 - empty session should be created ok 4 - Id is empty ok 5 - Session is empty ok 6 - Session is not expired ok 7 - Session created successfully! ok 8 - ok 9 - ctime & atime are set ok 10 - ctime == atime ok 11 - etime not set yet ok 12 - session id is 127193caf0c098d406db7cbe01c625e4 ok 13 - session holds 3 params3 ok 14 - My name's correct! ok 15 - 'emails' holds list of values ok 16 - 'emails' holds list of two values ok 17 - first value of 'emails' is correct! ok 18 - second value of 'emails' is correct! ok 19 - 'blogs' holds a hash ok 20 - first blog is correct ok 21 - second blog is correct ok 22 - === 2 === ok 23 - survived eval without error. ok 24 - Session was retrieved successfully ok 25 - session isn't expired yet ok 26 - session IDs are consistent ok 27 - ctime should be older than atime ok 28 - etime shouldn't be set yet ok 29 - session should hold params ok 30 - my name's correct ok 31 - 'emails' should hold list of values ok 32 - 'emails' should hold list of two values ok 33 - first value is correct! ok 34 - second value is correct! ok 35 - 'blogs' holds a hash ok 36 - first blog is correct! ok 37 - second blog is correct! ok 38 - etime set to 1 second ok 39 - etime set to one minute ok 40 - etime set to two hours ok 41 - etime set to 5 days ok 42 - etime set to 10 seconds in the past ok 43 - etime set back to one second ok 44 - calling close method survives eval ok 45 - === 3 === ok 46 - Session instance loaded ok 47 - session doesn't have ID ok 48 - session is empty, which is the same as above ok 49 - session was expired ok 50 - session data cleared ok 51 - new session created ok 52 - session has id :0845882c379e7c3cd473457e27a7f67a ok 53 - session isn't expired ok 54 - session isn't empty ok 55 - access and creation times are same ok 56 - it's a completely different session than above ok 57 - === 4 === ok 58 - Session '0845882c379e7c3cd473457e27a7f67a' removed from datastore successfully ok 59 - session object created successfully ok 60 - claimed ID (0845882c379e7c3cd473457e27a7f67a) couldn't be recovered. New ID is: aec1cfe70f0ed9393c4b3c8ee0bc5e5d ok 61 - === 5 === ok 62 - Session object created successfully ok 63 - claimed id (aec1cfe70f0ed9393c4b3c8ee0bc5e5d) was recovered successfully! ok 64 - === 6 === ok 65 - Session object created successfully ok 66 - New object created, because previous object was deleted ok 67 - CGI::Session::Test::SimpleObjectClass created successfully ok 68 ok 69 ok 70 ok 71 - OverloadedClass created successfully ok 72 - OverloadedClass is properly overloaded ok 73 - OverloadedClass is an object ok 74 ok 75 - CGI::Session::Test::SimpleObjectClass created successfully ok 76 - First element of anonymous array undef ok 77 ok 78 ok 79 ok 80 ok 81 - Overloaded objects have matching addresses ok 82 - === 7 === ok 83 - Session object created successfully ok 84 - Previously stored object loaded successfully ok 85 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 86 - ok 87 - ok 88 - ok 89 - ok 90 ok 91 - Object is still overloaded ok 92 - Object is really overloaded ok 93 - First element of anonymous array undef ok 94 - CGI::Session::Test::SimpleObjectClass loaded successfully ok 95 - ok 96 - ok 97 - ok 98 - ok 99 ok 100 - Object is really overloaded ok 101 - Overloaded objects have matching addresses ok t/header.t ...................... ok 1 - has header() method ok 2 - has http_header() method 1..2 ok t/ip_matches.t .................. ok 1 - ip_match off by default ok 2 - create new session ok 3 - check param TEST set ok 4 - store session id ok 5 - load session with different IP ok 6 - Same session id ok 7 - TEST param still set ok 8 - ip_match switched on ok 9 - create new session ok 10 - REMOTE_IP matches session ok 11 - check param TEST set ok 12 - store session id ok 13 - new session - same ip ok 14 - same session id ok 15 - REMOTE_IP matches session ok 16 - check param TEST set ok 17 - new session - different ip ok 18 - new session id 1..18 ok t/is_new.t ...................... ok 1 - use CGI::Session; ok 2 - session has is_new() method ok 3 - a brand new session is_new ok 4 - a session that has been closed and re-opened is not new 1..4 ok t/load.t ........................ ok 1 - undefined session is created with wrong number of args to load ok 2 - expected error is returned for too many args ok 3 - don't mention new() in error when load() fails directly. ok 4 - reality check: no error when calling new() ok 5 - expected error when load() called as instance method. 1..5 ok t/load_with_undef.t ............. 1..6 ok 1 - 'load(undef) returns an object which' isa 'CGI::Session' ok 2 - load(undef)'s session object returns an id which /is/ undef ok 3 - 'load($q without CGISESSID) returns an object which' isa 'CGI::Session' ok 4 - load($q without CGISESSID)'s session object returns an id which /is/ undef ok 5 - 'load($q with fake CGISESSID) returns an object which' isa 'CGI::Session' ok 6 - load($q with fake CGISESSID)'s session object returns an id which /is/ undef ok t/name.t ........................ 1..14 ok 1 ok 2 - name used as class method ok 3 - name as class method w/ param ok 4 - name as class method w/ param effective? ok 5 - name as instance method ok 6 - instance method falls through to class ok 7 - instance method w/ param ok 8 - instance method w/ param effective? ok 9 - instance method did not affect class method ok 10 - constructor new with name for session/cookie key ok 11 - constructor name not affecting class ok 12 - constructor on new session not affecting old ok 13 - session from query with new name ok 14 - session in query with default name ok t/new_with_undef.t .............. 1..6 ok 1 - 'new(undef) returns an object which' isa 'CGI::Session' ok 2 - new(undef)'s session object returns an id which is /not/ undef ok 3 - 'new($q without CGISESSID) returns an object which' isa 'CGI::Session' ok 4 - new($q without CGISESSID)'s session object returns an id which is /not/ undef ok 5 - 'new($q with fake CGISESSID) returns an object which' isa 'CGI::Session' ok 6 - new($q with fake CGISESSID)'s session object returns an id which is /not/ undef ok t/parse_dsn.t ................... 1..1 ok 1 - parse_dsn: abbreviation and lower-casing ok t/remote_addr.t ................. 1..5 ok 1 - use CGI::Session; ok 2 ok 3 - remote_addr() exists ok 4 - remote_addr() passes eval ok 5 - remote_addr() is 127.0.0.1 ok # Check in STORE of original item # Check in STORE of stored/retrieved item # Check in LOAD after loading from session t/session_param_undef.t ......... 1..21 ok 1 - use CGI::Session; ok 2 ok 3 - Items are still equal after storing ok 4 - Container->can('add_item') ok 5 - An object of class 'Container' isa 'Container' ok 6 - Container->can('add_item') ok 7 - Item->can('get_name') ok 8 - An object of class 'Item' isa 'Item' ok 9 - Item->can('get_name') ok 10 - Container->can('add_item') ok 11 - An object of class 'Container' isa 'Container' ok 12 - Container->can('add_item') ok 13 - Item->can('get_name') ok 14 - An object of class 'Item' isa 'Item' ok 15 - Item->can('get_name') ok 16 - Container->can('add_item') ok 17 - An object of class 'Container' isa 'Container' ok 18 - Container->can('add_item') ok 19 - Item->can('get_name') ok 20 - An object of class 'Item' isa 'Item' ok 21 - Item->can('get_name') ok t/str2seconds.t ................. ok 1 - got expected result when converting -1m to seconds ok 2 - got expected result when converting 1m to seconds ok 3 - got expected result when converting +1m to seconds ok 4 - got expected result when converting 1w to seconds ok 5 - got expected result when converting 1d to seconds ok 6 - got expected result when converting 1M to seconds ok 7 - got expected result when converting 1y to seconds ok 8 - got expected result when converting 1h to seconds ok 9 - got expected result when converting 1s to seconds 1..9 ok t/symlink_db_file.t ............. 1..11 ok 1 - Create new session named symlink ok 2 - We have an id ok 3 - Created symlink ok 4 - Check to make certain symlink was created ok 5 - Get our symlinked session ok 6 - we should have wiped out the symlink ok 7 - this session should be unique ok 8 - moving session file ok 9 - creating symlink ok 10 - flush should wipe out the symlink ok 11 - original session file has been restored ok t/symlink_file.t ................ 1..11 ok 1 - Create new session named symlink ok 2 - We have an id ok 3 - Created symlink ok 4 - Check to make certain symlink was created ok 5 - Get our symlinked session ok 6 - we should have wiped out the symlink ok 7 - this session should be unique ok 8 - moving session file ok 9 - creating symlink ok 10 - flush should wipe out the symlink ok 11 - original session file has been restored ok t/taint_storage.t ............... 1..6 ok 1 - new() with file+storable ok 2 - sid not tainted after new ok 3 - load() with file+storable ok 4 - sid not tainted after load ok 5 - parameter stored ok 6 - survived flush ok All tests successful. Files=49, Tests=1239, 32 wallclock secs ( 0.22 usr 0.06 sys + 3.50 cusr 0.71 csys = 4.49 CPU) Result: PASS create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libcgi-session-perl/ /usr/bin/perl Build install --destdir /<>/debian/libcgi-session-perl --create_packlist 0 Building CGI-Session Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/ErrorHandler.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/Driver.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/Tutorial.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/Test/Default.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/Driver/sqlite.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/Driver/DBI.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/Driver/file.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/Driver/mysql.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/Driver/postgresql.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/Driver/db_file.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/ID/static.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/ID/incr.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/ID/md5.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/Serialize/freezethaw.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/Serialize/default.pm Installing /<>/debian/libcgi-session-perl/usr/share/perl5/CGI/Session/Serialize/storable.pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::ErrorHandler.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::Test::Default.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::Driver::sqlite.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::ID::md5.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::Tutorial.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::ID::incr.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::Driver.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::Driver::db_file.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::Driver::file.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::Serialize::storable.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::Serialize::default.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::Driver::postgresql.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::ID::static.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::Serialize::freezethaw.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::Driver::DBI.3pm Installing /<>/debian/libcgi-session-perl/usr/share/man/man3/CGI::Session::Driver::mysql.3pm dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libcgi-session-perl' in '../libcgi-session-perl_4.48-4_all.deb'. dpkg-genbuildinfo -O../libcgi-session-perl_4.48-4_amd64.buildinfo dpkg-genchanges -O../libcgi-session-perl_4.48-4_amd64.changes dpkg-genchanges: info: not including original source code in upload dpkg-source -Zxz --after-build . dpkg-buildpackage: info: binary and diff upload (original source NOT included) -------------------------------------------------------------------------------- Build finished at 2024-08-05T12:35:52Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ libcgi-session-perl_4.48-4_amd64.changes: ----------------------------------------- Format: 1.8 Date: Fri, 10 Jun 2022 15:08:34 +0100 Source: libcgi-session-perl Binary: libcgi-session-perl Architecture: source all Version: 4.48-4 Distribution: sid Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libcgi-session-perl - persistent session data in CGI applications Changes: libcgi-session-perl (4.48-4) unstable; urgency=medium . [ Salvatore Bonaccorso ] * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. * debian/upstream/metadata: change GitHub/CPAN URL(s) to HTTPS. * Remove Julien Danjou from Uploaders. Thanks for your work! * Remove Rene Mayorga from Uploaders. Thanks for your work! . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ Laurent Baillet ] * fix lintian file-contains-trailing-whitespace warning . [ gregor herrmann ] * debian/watch: use uscan version 4. . [ Debian Janitor ] * Remove constraints unnecessary since stretch: + Build-Depends: Drop versioned constraint on libmodule-build-perl. Checksums-Sha1: cbc29a7cb614afcb2c92d42efaef898d9d3dba32 1398 libcgi-session-perl_4.48-4.dsc 6a5a3307a6644bfda88d100deb7b873d4d3ba72a 5716 libcgi-session-perl_4.48-4.debian.tar.xz c1c659cbcbb0c9303addac4f5e0cce54288f26c2 99844 libcgi-session-perl_4.48-4_all.deb 2abedb8b5c1484e771a6a6265cbdf2d294b2f7fa 5442 libcgi-session-perl_4.48-4_amd64.buildinfo Checksums-Sha256: d3b11ece3d2cfa1409492c1c943c15f4f6a35d3663c092f943ce6398fc361b59 1398 libcgi-session-perl_4.48-4.dsc 582aa9a00971591b98c122be6968add97c430af2ab0554c223b34fc179ce0087 5716 libcgi-session-perl_4.48-4.debian.tar.xz bf4b9c9ff8557adf869a53648706d645e43c24b5e8c6a806d1ace193503e2bb0 99844 libcgi-session-perl_4.48-4_all.deb 540f370fcf7b4950025138d153db7560603d4c20e9435cc7d091aa4fb4fcfddf 5442 libcgi-session-perl_4.48-4_amd64.buildinfo Files: fcfc9afb1865db2daaa74bc8f05bf514 1398 perl optional libcgi-session-perl_4.48-4.dsc 157de19d92220f2c371126c3d4094e3d 5716 perl optional libcgi-session-perl_4.48-4.debian.tar.xz 29daf42dfaecfef45a6f14dfda925e46 99844 perl optional libcgi-session-perl_4.48-4_all.deb fadaf77b22f303720d57db27188097b1 5442 perl optional libcgi-session-perl_4.48-4_amd64.buildinfo +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: libcgi-session-perl Binary: libcgi-session-perl Architecture: all source Version: 4.48-4 Checksums-Md5: fcfc9afb1865db2daaa74bc8f05bf514 1398 libcgi-session-perl_4.48-4.dsc 29daf42dfaecfef45a6f14dfda925e46 99844 libcgi-session-perl_4.48-4_all.deb Checksums-Sha1: cbc29a7cb614afcb2c92d42efaef898d9d3dba32 1398 libcgi-session-perl_4.48-4.dsc c1c659cbcbb0c9303addac4f5e0cce54288f26c2 99844 libcgi-session-perl_4.48-4_all.deb Checksums-Sha256: d3b11ece3d2cfa1409492c1c943c15f4f6a35d3663c092f943ce6398fc361b59 1398 libcgi-session-perl_4.48-4.dsc bf4b9c9ff8557adf869a53648706d645e43c24b5e8c6a806d1ace193503e2bb0 99844 libcgi-session-perl_4.48-4_all.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Mon, 05 Aug 2024 12:35:52 +0000 Build-Path: /<> Build-Tainted-By: merged-usr-via-aliased-dirs usr-local-has-programs Installed-Build-Depends: autoconf (= 2.71-3), automake (= 1:1.16.5-1.3), autopoint (= 0.22.5-2), autotools-dev (= 20220109.1), base-files (= 13.5), base-passwd (= 3.6.4), bash (= 5.2.21-2.1), binutils (= 2.42.90.20240720-2), binutils-common (= 2.42.90.20240720-2), binutils-x86-64-linux-gnu (= 2.42.90.20240720-2), bsdextrautils (= 2.40.2-2), bsdutils (= 1:2.40.2-2), build-essential (= 12.10), bzip2 (= 1.0.8-5.1), coreutils (= 9.4-3.1), cpp (= 4:14.1.0-2), cpp-13 (= 13.3.0-4), cpp-13-x86-64-linux-gnu (= 13.3.0-4), cpp-14 (= 14.2.0-1), cpp-14-x86-64-linux-gnu (= 14.2.0-1), cpp-x86-64-linux-gnu (= 4:14.1.0-2), dash (= 0.5.12-9), debconf (= 1.5.87), debhelper (= 13.16), debianutils (= 5.20), dh-autoreconf (= 20), dh-strip-nondeterminism (= 1.14.0-1), diffutils (= 1:3.10-1), dpkg (= 1.22.11), dpkg-dev (= 1.22.11), dwz (= 0.15-1+b1), file (= 1:5.45-3), findutils (= 4.10.0-2), g++ (= 4:14.1.0-2), g++-14 (= 14.2.0-1), g++-14-x86-64-linux-gnu (= 14.2.0-1), g++-x86-64-linux-gnu (= 4:14.1.0-2), gcc (= 4:14.1.0-2), gcc-13 (= 13.3.0-4), gcc-13-base (= 13.3.0-4), gcc-13-x86-64-linux-gnu (= 13.3.0-4), gcc-14 (= 14.2.0-1), gcc-14-base (= 14.2.0-1), gcc-14-x86-64-linux-gnu (= 14.2.0-1), gcc-x86-64-linux-gnu (= 4:14.1.0-2), gettext (= 0.22.5-2), gettext-base (= 0.22.5-2), grep (= 3.11-4), groff-base (= 1.23.0-5), gzip (= 1.12-1.1), hostname (= 3.23+nmu2), init-system-helpers (= 1.66), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.3.2-2), libarchive-zip-perl (= 1.68-1), libasan8 (= 14.2.0-1), libatomic1 (= 14.2.0-1), libattr1 (= 1:2.5.2-1), libaudit-common (= 1:3.1.2-4), libaudit1 (= 1:3.1.2-4+b1), libbinutils (= 2.42.90.20240720-2), libblkid1 (= 2.40.2-2), libbz2-1.0 (= 1.0.8-5.1), libc-bin (= 2.39-6), libc-dev-bin (= 2.39-6), libc6 (= 2.39-6), libc6-dev (= 2.39-6), libcap-ng0 (= 0.8.5-1+b1), libcap2 (= 1:2.66-5), libcc1-0 (= 14.2.0-1), libcgi-pm-perl (= 4.66-1), libcgi-simple-perl (= 1.281-1), libcrypt-dev (= 1:4.4.36-4), libcrypt1 (= 1:4.4.36-4), libctf-nobfd0 (= 2.42.90.20240720-2), libctf0 (= 2.42.90.20240720-2), libdb5.3t64 (= 5.3.28+dfsg2-7), libdbd-sqlite3-perl (= 1.74-1+b2), libdbi-perl (= 1.643-4+b2), libdebconfclient0 (= 0.272), libdebhelper-perl (= 13.16), libdpkg-perl (= 1.22.11), libelf1t64 (= 0.191-2), libfile-stripnondeterminism-perl (= 1.14.0-1), libfreezethaw-perl (= 0.5001-3), libgcc-13-dev (= 13.3.0-4), libgcc-14-dev (= 14.2.0-1), libgcc-s1 (= 14.2.0-1), libgdbm-compat4t64 (= 1.23-6), libgdbm6t64 (= 1.23-6), libgmp10 (= 2:6.3.0+dfsg-2+b1), libgomp1 (= 14.2.0-1), libgprofng0 (= 2.42.90.20240720-2), libhtml-parser-perl (= 3.83-1), libhtml-tagset-perl (= 3.24-1), libhwasan0 (= 14.2.0-1), libicu72 (= 72.1-5), libisl23 (= 0.26-3+b2), libitm1 (= 14.2.0-1), libjansson4 (= 2.14-2+b2), liblsan0 (= 14.2.0-1), liblzma5 (= 5.6.2-2), libmagic-mgc (= 1:5.45-3), libmagic1t64 (= 1:5.45-3), libmd0 (= 1.1.0-2), libmodule-build-perl (= 0.423400-2), libmount1 (= 2.40.2-2), libmpc3 (= 1.3.1-1+b2), libmpfr6 (= 4.2.1-1+b1), libpam-modules (= 1.5.3-7), libpam-modules-bin (= 1.5.3-7), libpam-runtime (= 1.5.3-7), libpam0g (= 1.5.3-7), libpcre2-8-0 (= 10.42-4+b1), libperl5.38t64 (= 5.38.2-5), libpipeline1 (= 1.5.7-2), libquadmath0 (= 14.2.0-1), libseccomp2 (= 2.5.5-1+b1), libselinux1 (= 3.5-2+b3), libsframe1 (= 2.42.90.20240720-2), libsmartcols1 (= 2.40.2-2), libsqlite3-0 (= 3.46.0-1), libssl3t64 (= 3.3.1-2), libstdc++-14-dev (= 14.2.0-1), libstdc++6 (= 14.2.0-1), libsystemd0 (= 256.4-2), libtinfo6 (= 6.5-2), libtool (= 2.4.7-7), libtsan2 (= 14.2.0-1), libubsan1 (= 14.2.0-1), libuchardet0 (= 0.0.8-1+b1), libudev1 (= 256.4-2), libunistring5 (= 1.2-1), liburi-perl (= 5.28-1), libuuid1 (= 2.40.2-2), libxml2 (= 2.12.7+dfsg-3+b1), libzstd1 (= 1.5.6+dfsg-1), linux-libc-dev (= 6.9.12-1), m4 (= 1.4.19-4), make (= 4.3-4.1), man-db (= 2.12.1-2), mawk (= 1.3.4.20240622-2), ncurses-base (= 6.5-2), ncurses-bin (= 6.5-2), patch (= 2.7.6-7), perl (= 5.38.2-5), perl-base (= 5.38.2-5), perl-modules-5.38 (= 5.38.2-5), po-debconf (= 1.0.21+nmu1), rpcsvc-proto (= 1.4.3-1), sed (= 4.9-2), sensible-utils (= 0.0.24), sysvinit-utils (= 3.09-2), tar (= 1.35+dfsg-3), usr-is-merged (= 39), util-linux (= 2.40.2-2), xz-utils (= 5.6.2-2), zlib1g (= 1:1.3.dfsg+really1.3.1-1) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" SOURCE_DATE_EPOCH="1654870114" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libcgi-session-perl_4.48-4_all.deb ---------------------------------- new Debian package, version 2.0. size 99844 bytes: control archive=1784 bytes. 783 bytes, 16 lines control 3219 bytes, 39 lines md5sums Package: libcgi-session-perl Version: 4.48-4 Architecture: all Maintainer: Debian Perl Group Installed-Size: 248 Depends: perl:any, libcgi-pm-perl | perl (<< 5.19) Recommends: libdbi-perl, libfreezethaw-perl, libdbd-pg-perl | libdbd-mysql-perl | libdbd-sqlite3-perl Section: perl Priority: optional Homepage: https://metacpan.org/release/CGI-Session Description: persistent session data in CGI applications CGI-Session is a Perl5 library that provides an easy, reliable and modular session management system across HTTP requests. Persistency is a key feature for such applications as shopping carts, login/authentication routines, and application that need to carry data across HTTP requests. CGI::Session does that and many more. drwxr-xr-x root/root 0 2022-06-10 14:08 ./ drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/ drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/ drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/doc/ drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/doc/libcgi-session-perl/ -rw-r--r-- root/root 1199 2022-06-10 14:08 ./usr/share/doc/libcgi-session-perl/changelog.Debian.gz -rw-r--r-- root/root 9458 2011-07-11 13:00 ./usr/share/doc/libcgi-session-perl/changelog.gz -rw-r--r-- root/root 1496 2022-06-10 14:08 ./usr/share/doc/libcgi-session-perl/copyright drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/doc/libcgi-session-perl/examples/ -rwxr-xr-x root/root 317 2011-07-11 13:00 ./usr/share/doc/libcgi-session-perl/examples/purge.pl -rwxr-xr-x root/root 11743 2011-07-11 13:00 ./usr/share/doc/libcgi-session-perl/examples/subscriptions.cgi drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/man/ drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/man/man3/ -rw-r--r-- root/root 10871 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session.3pm.gz -rw-r--r-- root/root 3199 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::Driver.3pm.gz -rw-r--r-- root/root 2331 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::Driver::DBI.3pm.gz -rw-r--r-- root/root 1285 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::Driver::db_file.3pm.gz -rw-r--r-- root/root 1915 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::Driver::file.3pm.gz -rw-r--r-- root/root 1873 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::Driver::mysql.3pm.gz -rw-r--r-- root/root 1968 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::Driver::postgresql.3pm.gz -rw-r--r-- root/root 1578 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::Driver::sqlite.3pm.gz -rw-r--r-- root/root 1382 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::ErrorHandler.3pm.gz -rw-r--r-- root/root 1406 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::ID::incr.3pm.gz -rw-r--r-- root/root 1023 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::ID::md5.3pm.gz -rw-r--r-- root/root 1304 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::ID::static.3pm.gz -rw-r--r-- root/root 1223 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::Serialize::default.3pm.gz -rw-r--r-- root/root 1187 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::Serialize::freezethaw.3pm.gz -rw-r--r-- root/root 1193 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::Serialize::storable.3pm.gz -rw-r--r-- root/root 1170 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::Test::Default.3pm.gz -rw-r--r-- root/root 10191 2022-06-10 14:08 ./usr/share/man/man3/CGI::Session::Tutorial.3pm.gz drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/perl5/ drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/perl5/CGI/ -rw-r--r-- root/root 51161 2022-06-10 14:08 ./usr/share/perl5/CGI/Session.pm drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/ -rw-r--r-- root/root 7498 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Driver.pm drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Driver/ -rw-r--r-- root/root 8140 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Driver/DBI.pm -rw-r--r-- root/root 5254 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Driver/db_file.pm -rw-r--r-- root/root 6890 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Driver/file.pm -rw-r--r-- root/root 4188 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Driver/mysql.pm -rw-r--r-- root/root 5162 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Driver/postgresql.pm -rw-r--r-- root/root 3822 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Driver/sqlite.pm -rw-r--r-- root/root 1605 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/ErrorHandler.pm drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/ID/ -rw-r--r-- root/root 2388 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/ID/incr.pm -rw-r--r-- root/root 757 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/ID/md5.pm -rw-r--r-- root/root 1291 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/ID/static.pm drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Serialize/ -rw-r--r-- root/root 4088 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Serialize/default.pm -rw-r--r-- root/root 1303 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Serialize/freezethaw.pm -rw-r--r-- root/root 1296 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Serialize/storable.pm drwxr-xr-x root/root 0 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Test/ -rw-r--r-- root/root 15453 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Test/Default.pm -rw-r--r-- root/root 26361 2022-06-10 14:08 ./usr/share/perl5/CGI/Session/Tutorial.pm +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 1652 Build-Time: 34 Distribution: sid Host Architecture: amd64 Install-Time: 4 Job: /srv/debomatic/incoming/libcgi-session-perl_4.48-4.dsc Machine Architecture: amd64 Package: libcgi-session-perl Package-Time: 45 Source-Version: 4.48-4 Space: 1652 Status: successful Version: 4.48-4 -------------------------------------------------------------------------------- Finished at 2024-08-05T12:35:52Z Build needed 00:00:45, 1652k disk space