sbuild (Debian sbuild) 0.91.9 (05 May 2026) on carme.larted.org.uk +==============================================================================+ | inn2 2.7.4~20260419-1+b1 (amd64) Fri, 26 Jun 2026 22:25:43 +0000 | +==============================================================================+ Package: inn2 Version: 2.7.4~20260419-1+b1 Source Version: 2.7.4~20260419-1 Distribution: perl-5.44 Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: any I: Setting up the chroot... I: Creating chroot session... I: Setting up log color... +------------------------------------------------------------------------------+ | Chroot Setup Commands Fri, 26 Jun 2026 22:25:44 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup inn2_2.7.4~20260419-1 perl-5.44 amd64 ------------------------------------------------------------------------------------------------------------ I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup inn2_2.7.4~20260419-1 perl-5.44 amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: Setting up apt archive... +------------------------------------------------------------------------------+ | Update chroot Fri, 26 Jun 2026 22:25:44 +0000 | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.44 InRelease [3027 B] Hit:2 http://deb.debian.org/debian unstable InRelease Get:1 file:/srv/reprepro perl-5.44 InRelease [3027 B] Get:3 http://deb.debian.org/debian sid InRelease [189 kB] Get:4 file:/srv/reprepro perl-5.44/main amd64 Packages [5833 B] Get:5 http://deb.debian.org/debian sid/main Sources [11.6 MB] Fetched 11.8 MB in 1s (12.8 MB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following NEW packages will be installed: libperl5.44 perl-modules-5.44 The following packages will be upgraded: perl perl-base 2 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/9737 kB of archives. After this operation, 51.3 MB of additional disk space will be used. Get:1 file:/srv/reprepro perl-5.44/main amd64 perl-modules-5.44 all 5.44.0~rc1-1 [3254 kB] Get:2 file:/srv/reprepro perl-5.44/main amd64 libperl5.44 amd64 5.44.0~rc1-1 [4323 kB] Get:3 file:/srv/reprepro perl-5.44/main amd64 perl amd64 5.44.0~rc1-1 [267 kB] Get:4 file:/srv/reprepro perl-5.44/main amd64 perl-base amd64 5.44.0~rc1-1 [1893 kB] (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 12276 files and directories currently installed.) Preparing to unpack .../perl_5.44.0~rc1-1_amd64.deb ... Unpacking perl (5.44.0~rc1-1) over (5.40.1-8) ... Selecting previously unselected package perl-modules-5.44. Preparing to unpack .../perl-modules-5.44_5.44.0~rc1-1_all.deb ... Unpacking perl-modules-5.44 (5.44.0~rc1-1) ... Selecting previously unselected package libperl5.44:amd64. Preparing to unpack .../libperl5.44_5.44.0~rc1-1_amd64.deb ... Unpacking libperl5.44:amd64 (5.44.0~rc1-1) ... Preparing to unpack .../perl-base_5.44.0~rc1-1_amd64.deb ... Unpacking perl-base (5.44.0~rc1-1) over (5.40.1-8) ... Setting up perl-base (5.44.0~rc1-1) ... Setting up perl-modules-5.44 (5.44.0~rc1-1) ... Setting up libperl5.44:amd64 (5.44.0~rc1-1) ... Setting up perl (5.44.0~rc1-1) ... Processing triggers for libc-bin (2.42-17) ... +------------------------------------------------------------------------------+ | Fetch source files Fri, 26 Jun 2026 22:25:49 +0000 | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/inn2_2.7.4~20260419-1.dsc exists in /srv/debomatic/incoming; copying to chroot +------------------------------------------------------------------------------+ | Install package build dependencies Fri, 26 Jun 2026 22:25:49 +0000 | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper (>= 13.31~), bison, flex, groff-base, libperl-dev, python3-dev, libpython3-dev, libdb-dev, libkrb5-dev, libpam0g-dev, libsasl2-dev, libsystemd-dev, pkgconf, libcanlock-dev, libsqlite3-dev, libssl-dev, zlib1g-dev, build-essential Filtered Build-Depends: debhelper (>= 13.31~), bison, flex, groff-base, libperl-dev, python3-dev, libpython3-dev, libdb-dev, libkrb5-dev, libpam0g-dev, libsasl2-dev, libsystemd-dev, pkgconf, libcanlock-dev, libsqlite3-dev, libssl-dev, zlib1g-dev, build-essential dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/build/inn2-sq6OrW/resolver-InucQr/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/build/inn2-sq6OrW/resolver-InucQr/apt_archive ./ InRelease Get:2 copy:/build/inn2-sq6OrW/resolver-InucQr/apt_archive ./ Release [609 B] Ign:3 copy:/build/inn2-sq6OrW/resolver-InucQr/apt_archive ./ Release.gpg Get:4 copy:/build/inn2-sq6OrW/resolver-InucQr/apt_archive ./ Sources [805 B] Get:5 copy:/build/inn2-sq6OrW/resolver-InucQr/apt_archive ./ Packages [837 B] Fetched 2251 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: autoconf automake autopoint autotools-dev bison bsdextrautils comerr-dev debhelper dh-autoreconf dh-strip-nondeterminism dwz file flex gettext gettext-base groff-base intltool-debian krb5-multidev libarchive-zip-perl libaudit-dev libcanlock-dev libcanlock3 libcap-ng-dev libcom-err2 libcrypt-dev libdb-dev libdb5.3-dev libdebhelper-perl libelf1t64 libexpat1 libexpat1-dev libfile-stripnondeterminism-perl libgssapi-krb5-2 libgssrpc4t64 libjs-sphinxdoc libk5crypto3 libkadm5clnt-mit12 libkadm5srv-mit12 libkdb5-10t64 libkeyutils1 libkrb5-3 libkrb5-dev libkrb5support0 libmagic-mgc libmagic1t64 libpam0g-dev libperl-dev libpipeline1 libpkgconf7 libpython3-dev libpython3-stdlib libpython3.13 libpython3.13-dev libpython3.13-minimal libpython3.13-stdlib libsasl2-dev libsqlite3-dev libssl-dev libsystemd-dev libtool libuchardet0 libxml2-16 m4 man-db media-types netbase pkgconf pkgconf-bin po-debconf python3 python3-dev python3-minimal python3.13 python3.13-dev python3.13-minimal sensible-utils tzdata zlib1g-dev Suggested packages: autoconf-archive gnu-standards autoconf-doc bison-doc doc-base dh-make flex-doc gettext-doc libasprintf-dev libgettextpo-dev gnulib-l10n groff krb5-doc db5.3-doc krb5-user sqlite3-doc libssl-doc libtool-doc gfortran | fortran95-compiler m4-doc apparmor less www-browser libmail-box-perl python3-doc python3-tk python3-venv python3.13-venv python3.13-doc binfmt-support Recommended packages: libfl-dev curl | wget | lynx libarchive-cpio-perl krb5-locales libpam-doc libltdl-dev libmail-sendmail-perl ca-certificates The following NEW packages will be installed: autoconf automake autopoint autotools-dev bison bsdextrautils comerr-dev debhelper dh-autoreconf dh-strip-nondeterminism dwz file flex gettext gettext-base groff-base intltool-debian krb5-multidev libarchive-zip-perl libaudit-dev libcanlock-dev libcanlock3 libcap-ng-dev libcom-err2 libcrypt-dev libdb-dev libdb5.3-dev libdebhelper-perl libelf1t64 libexpat1 libexpat1-dev libfile-stripnondeterminism-perl libgssapi-krb5-2 libgssrpc4t64 libjs-sphinxdoc libk5crypto3 libkadm5clnt-mit12 libkadm5srv-mit12 libkdb5-10t64 libkeyutils1 libkrb5-3 libkrb5-dev libkrb5support0 libmagic-mgc libmagic1t64 libpam0g-dev libperl-dev libpipeline1 libpkgconf7 libpython3-dev libpython3-stdlib libpython3.13 libpython3.13-dev libpython3.13-minimal libpython3.13-stdlib libsasl2-dev libsqlite3-dev libssl-dev libsystemd-dev libtool libuchardet0 libxml2-16 m4 man-db media-types netbase pkgconf pkgconf-bin po-debconf python3 python3-dev python3-minimal python3.13 python3.13-dev python3.13-minimal sbuild-build-depends-main-dummy sensible-utils tzdata zlib1g-dev 0 upgraded, 79 newly installed, 0 to remove and 0 not upgraded. Need to get 37.1 MB/38.3 MB of archives. After this operation, 164 MB of additional disk space will be used. Get:1 copy:/build/inn2-sq6OrW/resolver-InucQr/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [944 B] Get:2 file:/srv/reprepro perl-5.44/main amd64 libperl-dev amd64 5.44.0~rc1-1 [1169 kB] Get:3 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.21-1 [332 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 flex amd64 2.6.4-8.2+b5 [425 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 libexpat1 amd64 2.8.2-1 [121 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 libpython3.13-minimal amd64 3.13.14-1 [864 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 python3.13-minimal amd64 3.13.14-1 [2271 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 python3-minimal amd64 3.13.9-3+b1 [25.4 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 media-types all 14.0.0 [30.8 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 netbase all 6.5 [12.4 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 tzdata all 2026b-1 [260 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 libpython3.13-stdlib amd64 3.13.14-1 [1982 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 python3.13 amd64 3.13.14-1 [781 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 libpython3-stdlib amd64 3.13.9-3+b1 [8348 B] Get:15 http://deb.debian.org/debian unstable/main amd64 python3 amd64 3.13.9-3+b1 [25.4 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.26 [27.0 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.47-4 [345 kB] Get:18 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.47-4 [111 kB] Get:19 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.47-4 [43.0 kB] Get:20 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 1.0-1 [332 kB] Get:21 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-2+b2 [69.0 kB] Get:22 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.24.1-1 [1336 kB] Get:23 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.42.2-1 [100.0 kB] Get:24 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-3 [49.2 kB] Get:25 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get:26 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.73-2 [516 kB] Get:27 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1+nmu1 [60.0 kB] Get:28 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.18.1-4 [877 kB] Get:29 http://deb.debian.org/debian unstable/main amd64 autopoint all 1.0-1 [820 kB] Get:30 http://deb.debian.org/debian unstable/main amd64 bison amd64 2:3.8.2+dfsg-1+b3 [1170 kB] Get:31 http://deb.debian.org/debian unstable/main amd64 libcom-err2 amd64 1.47.4-1 [19.2 kB] Get:32 http://deb.debian.org/debian unstable/main amd64 comerr-dev amd64 2.1-1.47.4-1 [50.9 kB] Get:33 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 14.2 [77.1 kB] Get:34 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-11 [539 kB] Get:35 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 22 [12.2 kB] Get:36 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:37 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.15.1-1 [17.1 kB] Get:38 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.15.1-1 [6020 B] Get:39 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.195-1 [58.1 kB] Get:40 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.16-4 [108 kB] Get:41 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.15.3+dfsg-1 [642 kB] Get:42 http://deb.debian.org/debian unstable/main amd64 gettext amd64 1.0-1 [2660 kB] Get:43 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:44 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.22 [216 kB] Get:45 http://deb.debian.org/debian unstable/main amd64 debhelper all 14.2 [933 kB] Get:46 http://deb.debian.org/debian unstable/main amd64 libkrb5support0 amd64 1.22.1-3 [31.1 kB] Get:47 http://deb.debian.org/debian unstable/main amd64 libk5crypto3 amd64 1.22.1-3 [79.0 kB] Get:48 http://deb.debian.org/debian unstable/main amd64 libkeyutils1 amd64 1.6.3-6+b2 [9348 B] Get:49 http://deb.debian.org/debian unstable/main amd64 libkrb5-3 amd64 1.22.1-3 [335 kB] Get:50 http://deb.debian.org/debian unstable/main amd64 libgssapi-krb5-2 amd64 1.22.1-3 [137 kB] Get:51 http://deb.debian.org/debian unstable/main amd64 libgssrpc4t64 amd64 1.22.1-3 [58.3 kB] Get:52 http://deb.debian.org/debian unstable/main amd64 libkadm5clnt-mit12 amd64 1.22.1-3 [40.3 kB] Get:53 http://deb.debian.org/debian unstable/main amd64 libkdb5-10t64 amd64 1.22.1-3 [41.3 kB] Get:54 http://deb.debian.org/debian unstable/main amd64 libkadm5srv-mit12 amd64 1.22.1-3 [54.1 kB] Get:55 http://deb.debian.org/debian unstable/main amd64 krb5-multidev amd64 1.22.1-3 [125 kB] Get:56 http://deb.debian.org/debian unstable/main amd64 libcap-ng-dev amd64 0.9.3-1 [38.9 kB] Get:57 http://deb.debian.org/debian unstable/main amd64 libaudit-dev amd64 1:4.1.2-1+b1 [97.9 kB] Get:58 http://deb.debian.org/debian unstable/main amd64 libcanlock3 amd64 3.3.1-1+b2 [18.5 kB] Get:59 http://deb.debian.org/debian unstable/main amd64 libcanlock-dev amd64 3.3.1-1+b2 [42.4 kB] Get:60 http://deb.debian.org/debian unstable/main amd64 libcrypt-dev amd64 1:4.5.1-1+b1 [127 kB] Get:61 http://deb.debian.org/debian unstable/main amd64 libdb5.3-dev amd64 5.3.28+dfsg2-11+b1 [793 kB] Get:62 http://deb.debian.org/debian unstable/main amd64 libdb-dev amd64 5.3.4+b1 [2352 B] Get:63 http://deb.debian.org/debian unstable/main amd64 libexpat1-dev amd64 2.8.2-1 [177 kB] Get:64 http://deb.debian.org/debian unstable/main amd64 libjs-sphinxdoc all 9.1.0-4 [45.7 kB] Get:65 http://deb.debian.org/debian unstable/main amd64 libkrb5-dev amd64 1.22.1-3 [14.0 kB] Get:66 http://deb.debian.org/debian unstable/main amd64 libpam0g-dev amd64 1.7.0-6 [66.1 kB] Get:67 http://deb.debian.org/debian unstable/main amd64 libpkgconf7 amd64 2.5.1-4 [47.8 kB] Get:68 http://deb.debian.org/debian unstable/main amd64 libpython3.13 amd64 3.13.14-1 [2191 kB] Get:69 http://deb.debian.org/debian unstable/main amd64 zlib1g-dev amd64 1:1.3.dfsg+really1.3.2-3 [918 kB] Get:70 http://deb.debian.org/debian unstable/main amd64 libpython3.13-dev amd64 3.13.14-1 [5288 kB] Get:71 http://deb.debian.org/debian unstable/main amd64 libpython3-dev amd64 3.13.9-3+b1 [8588 B] Get:72 http://deb.debian.org/debian unstable/main amd64 libssl-dev amd64 3.6.3-1 [3025 kB] Get:73 http://deb.debian.org/debian unstable/main amd64 libsasl2-dev amd64 2.1.28+dfsg1-11 [234 kB] Get:74 http://deb.debian.org/debian unstable/main amd64 libsqlite3-dev amd64 3.53.2-1 [1165 kB] Get:75 http://deb.debian.org/debian unstable/main amd64 libsystemd-dev amd64 261-1 [1368 kB] Get:76 http://deb.debian.org/debian unstable/main amd64 pkgconf-bin amd64 2.5.1-4 [35.9 kB] Get:77 http://deb.debian.org/debian unstable/main amd64 pkgconf amd64 2.5.1-4 [33.6 kB] Get:78 http://deb.debian.org/debian unstable/main amd64 python3.13-dev amd64 3.13.14-1 [504 kB] Get:79 http://deb.debian.org/debian unstable/main amd64 python3-dev amd64 3.13.9-3+b1 [29.8 kB] Preconfiguring packages ... Fetched 37.1 MB in 0s (141 MB/s) Selecting previously unselected package m4. (Reading database ... 14520 files and directories currently installed.) Preparing to unpack .../archives/m4_1.4.21-1_amd64.deb ... Unpacking m4 (1.4.21-1) ... Selecting previously unselected package flex. Preparing to unpack .../flex_2.6.4-8.2+b5_amd64.deb ... Unpacking flex (2.6.4-8.2+b5) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../libexpat1_2.8.2-1_amd64.deb ... Unpacking libexpat1:amd64 (2.8.2-1) ... Selecting previously unselected package libpython3.13-minimal:amd64. Preparing to unpack .../libpython3.13-minimal_3.13.14-1_amd64.deb ... Unpacking libpython3.13-minimal:amd64 (3.13.14-1) ... Selecting previously unselected package python3.13-minimal. Preparing to unpack .../python3.13-minimal_3.13.14-1_amd64.deb ... Unpacking python3.13-minimal (3.13.14-1) ... Setting up libpython3.13-minimal:amd64 (3.13.14-1) ... Setting up libexpat1:amd64 (2.8.2-1) ... Setting up python3.13-minimal (3.13.14-1) ... Selecting previously unselected package python3-minimal. (Reading database ... 15038 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.13.9-3+b1_amd64.deb ... Unpacking python3-minimal (3.13.9-3+b1) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_14.0.0_all.deb ... Unpacking media-types (14.0.0) ... Selecting previously unselected package netbase. Preparing to unpack .../2-netbase_6.5_all.deb ... Unpacking netbase (6.5) ... Selecting previously unselected package tzdata. Preparing to unpack .../3-tzdata_2026b-1_all.deb ... Unpacking tzdata (2026b-1) ... Selecting previously unselected package libpython3.13-stdlib:amd64. Preparing to unpack .../4-libpython3.13-stdlib_3.13.14-1_amd64.deb ... Unpacking libpython3.13-stdlib:amd64 (3.13.14-1) ... Selecting previously unselected package python3.13. Preparing to unpack .../5-python3.13_3.13.14-1_amd64.deb ... Unpacking python3.13 (3.13.14-1) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../6-libpython3-stdlib_3.13.9-3+b1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.13.9-3+b1) ... Setting up python3-minimal (3.13.9-3+b1) ... Selecting previously unselected package python3. (Reading database ... 16019 files and directories currently installed.) Preparing to unpack .../00-python3_3.13.9-3+b1_amd64.deb ... Unpacking python3 (3.13.9-3+b1) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.47-4_amd64.deb ... Unpacking libmagic-mgc (1:5.47-4) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../03-libmagic1t64_1%3a5.47-4_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.47-4) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.47-4_amd64.deb ... Unpacking file (1:5.47-4) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_1.0-1_amd64.deb ... Unpacking gettext-base (1.0-1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../06-libuchardet0_0.0.8-2+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-2+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.24.1-1_amd64.deb ... Unpacking groff-base (1.24.1-1) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.42.2-1_amd64.deb ... Unpacking bsdextrautils (2.42.2-1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../09-libpipeline1_1.5.8-3_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-3) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.73-2_all.deb ... Unpacking autoconf (2.73-2) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1+nmu1_all.deb ... Unpacking autotools-dev (20240727.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-4_all.deb ... Unpacking automake (1:1.18.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_1.0-1_all.deb ... Unpacking autopoint (1.0-1) ... Selecting previously unselected package bison. Preparing to unpack .../15-bison_2%3a3.8.2+dfsg-1+b3_amd64.deb ... Unpacking bison (2:3.8.2+dfsg-1+b3) ... Selecting previously unselected package libcom-err2:amd64. Preparing to unpack .../16-libcom-err2_1.47.4-1_amd64.deb ... Unpacking libcom-err2:amd64 (1.47.4-1) ... Selecting previously unselected package comerr-dev:amd64. Preparing to unpack .../17-comerr-dev_2.1-1.47.4-1_amd64.deb ... Unpacking comerr-dev:amd64 (2.1-1.47.4-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_14.2_all.deb ... Unpacking libdebhelper-perl (14.2) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.5.4-11_all.deb ... Unpacking libtool (2.5.4-11) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_22_all.deb ... Unpacking dh-autoreconf (22) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.15.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.15.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.1-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../24-libelf1t64_0.195-1_amd64.deb ... Unpacking libelf1t64:amd64 (0.195-1) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.16-4_amd64.deb ... Unpacking dwz (0.16-4) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../26-libxml2-16_2.15.3+dfsg-1_amd64.deb ... Unpacking libxml2-16:amd64 (2.15.3+dfsg-1) ... Selecting previously unselected package gettext. Preparing to unpack .../27-gettext_1.0-1_amd64.deb ... Unpacking gettext (1.0-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../28-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../29-po-debconf_1.0.22_all.deb ... Unpacking po-debconf (1.0.22) ... Selecting previously unselected package debhelper. Preparing to unpack .../30-debhelper_14.2_all.deb ... Unpacking debhelper (14.2) ... Selecting previously unselected package libkrb5support0:amd64. Preparing to unpack .../31-libkrb5support0_1.22.1-3_amd64.deb ... Unpacking libkrb5support0:amd64 (1.22.1-3) ... Selecting previously unselected package libk5crypto3:amd64. Preparing to unpack .../32-libk5crypto3_1.22.1-3_amd64.deb ... Unpacking libk5crypto3:amd64 (1.22.1-3) ... Selecting previously unselected package libkeyutils1:amd64. Preparing to unpack .../33-libkeyutils1_1.6.3-6+b2_amd64.deb ... Unpacking libkeyutils1:amd64 (1.6.3-6+b2) ... Selecting previously unselected package libkrb5-3:amd64. Preparing to unpack .../34-libkrb5-3_1.22.1-3_amd64.deb ... Unpacking libkrb5-3:amd64 (1.22.1-3) ... Selecting previously unselected package libgssapi-krb5-2:amd64. Preparing to unpack .../35-libgssapi-krb5-2_1.22.1-3_amd64.deb ... Unpacking libgssapi-krb5-2:amd64 (1.22.1-3) ... Selecting previously unselected package libgssrpc4t64:amd64. Preparing to unpack .../36-libgssrpc4t64_1.22.1-3_amd64.deb ... Unpacking libgssrpc4t64:amd64 (1.22.1-3) ... Selecting previously unselected package libkadm5clnt-mit12:amd64. Preparing to unpack .../37-libkadm5clnt-mit12_1.22.1-3_amd64.deb ... Unpacking libkadm5clnt-mit12:amd64 (1.22.1-3) ... Selecting previously unselected package libkdb5-10t64:amd64. Preparing to unpack .../38-libkdb5-10t64_1.22.1-3_amd64.deb ... Unpacking libkdb5-10t64:amd64 (1.22.1-3) ... Selecting previously unselected package libkadm5srv-mit12:amd64. Preparing to unpack .../39-libkadm5srv-mit12_1.22.1-3_amd64.deb ... Unpacking libkadm5srv-mit12:amd64 (1.22.1-3) ... Selecting previously unselected package krb5-multidev:amd64. Preparing to unpack .../40-krb5-multidev_1.22.1-3_amd64.deb ... Unpacking krb5-multidev:amd64 (1.22.1-3) ... Selecting previously unselected package libcap-ng-dev:amd64. Preparing to unpack .../41-libcap-ng-dev_0.9.3-1_amd64.deb ... Unpacking libcap-ng-dev:amd64 (0.9.3-1) ... Selecting previously unselected package libaudit-dev:amd64. Preparing to unpack .../42-libaudit-dev_1%3a4.1.2-1+b1_amd64.deb ... Unpacking libaudit-dev:amd64 (1:4.1.2-1+b1) ... Selecting previously unselected package libcanlock3:amd64. Preparing to unpack .../43-libcanlock3_3.3.1-1+b2_amd64.deb ... Unpacking libcanlock3:amd64 (3.3.1-1+b2) ... Selecting previously unselected package libcanlock-dev:amd64. Preparing to unpack .../44-libcanlock-dev_3.3.1-1+b2_amd64.deb ... Unpacking libcanlock-dev:amd64 (3.3.1-1+b2) ... Selecting previously unselected package libcrypt-dev:amd64. Preparing to unpack .../45-libcrypt-dev_1%3a4.5.1-1+b1_amd64.deb ... Unpacking libcrypt-dev:amd64 (1:4.5.1-1+b1) ... Selecting previously unselected package libdb5.3-dev. Preparing to unpack .../46-libdb5.3-dev_5.3.28+dfsg2-11+b1_amd64.deb ... Unpacking libdb5.3-dev (5.3.28+dfsg2-11+b1) ... Selecting previously unselected package libdb-dev:amd64. Preparing to unpack .../47-libdb-dev_5.3.4+b1_amd64.deb ... Unpacking libdb-dev:amd64 (5.3.4+b1) ... Selecting previously unselected package libexpat1-dev:amd64. Preparing to unpack .../48-libexpat1-dev_2.8.2-1_amd64.deb ... Unpacking libexpat1-dev:amd64 (2.8.2-1) ... Selecting previously unselected package libjs-sphinxdoc. Preparing to unpack .../49-libjs-sphinxdoc_9.1.0-4_all.deb ... Unpacking libjs-sphinxdoc (9.1.0-4) ... Selecting previously unselected package libkrb5-dev:amd64. Preparing to unpack .../50-libkrb5-dev_1.22.1-3_amd64.deb ... Unpacking libkrb5-dev:amd64 (1.22.1-3) ... Selecting previously unselected package libpam0g-dev:amd64. Preparing to unpack .../51-libpam0g-dev_1.7.0-6_amd64.deb ... Unpacking libpam0g-dev:amd64 (1.7.0-6) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../52-libperl-dev_5.44.0~rc1-1_amd64.deb ... Unpacking libperl-dev:amd64 (5.44.0~rc1-1) ... Selecting previously unselected package libpkgconf7:amd64. Preparing to unpack .../53-libpkgconf7_2.5.1-4_amd64.deb ... Unpacking libpkgconf7:amd64 (2.5.1-4) ... Selecting previously unselected package libpython3.13:amd64. Preparing to unpack .../54-libpython3.13_3.13.14-1_amd64.deb ... Unpacking libpython3.13:amd64 (3.13.14-1) ... Selecting previously unselected package zlib1g-dev:amd64. Preparing to unpack .../55-zlib1g-dev_1%3a1.3.dfsg+really1.3.2-3_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.2-3) ... Selecting previously unselected package libpython3.13-dev:amd64. Preparing to unpack .../56-libpython3.13-dev_3.13.14-1_amd64.deb ... Unpacking libpython3.13-dev:amd64 (3.13.14-1) ... Selecting previously unselected package libpython3-dev:amd64. Preparing to unpack .../57-libpython3-dev_3.13.9-3+b1_amd64.deb ... Unpacking libpython3-dev:amd64 (3.13.9-3+b1) ... Selecting previously unselected package libssl-dev:amd64. Preparing to unpack .../58-libssl-dev_3.6.3-1_amd64.deb ... Unpacking libssl-dev:amd64 (3.6.3-1) ... Selecting previously unselected package libsasl2-dev. Preparing to unpack .../59-libsasl2-dev_2.1.28+dfsg1-11_amd64.deb ... Unpacking libsasl2-dev (2.1.28+dfsg1-11) ... Selecting previously unselected package libsqlite3-dev:amd64. Preparing to unpack .../60-libsqlite3-dev_3.53.2-1_amd64.deb ... Unpacking libsqlite3-dev:amd64 (3.53.2-1) ... Selecting previously unselected package libsystemd-dev:amd64. Preparing to unpack .../61-libsystemd-dev_261-1_amd64.deb ... Unpacking libsystemd-dev:amd64 (261-1) ... Selecting previously unselected package pkgconf-bin. Preparing to unpack .../62-pkgconf-bin_2.5.1-4_amd64.deb ... Unpacking pkgconf-bin (2.5.1-4) ... Selecting previously unselected package pkgconf:amd64. Preparing to unpack .../63-pkgconf_2.5.1-4_amd64.deb ... Unpacking pkgconf:amd64 (2.5.1-4) ... Selecting previously unselected package python3.13-dev. Preparing to unpack .../64-python3.13-dev_3.13.14-1_amd64.deb ... Unpacking python3.13-dev (3.13.14-1) ... Selecting previously unselected package python3-dev. Preparing to unpack .../65-python3-dev_3.13.9-3+b1_amd64.deb ... Unpacking python3-dev (3.13.9-3+b1) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../66-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up media-types (14.0.0) ... Setting up libpipeline1:amd64 (1.5.8-3) ... Setting up libkeyutils1:amd64 (1.6.3-6+b2) ... Setting up bsdextrautils (2.42.2-1) ... Setting up libmagic-mgc (1:5.47-4) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:amd64 (2.15.3+dfsg-1) ... Setting up libdebhelper-perl (14.2) ... Setting up libpkgconf7:amd64 (2.5.1-4) ... Setting up libmagic1t64:amd64 (1:5.47-4) ... Setting up gettext-base (1.0-1) ... Setting up m4 (1.4.21-1) ... Setting up libcom-err2:amd64 (1.47.4-1) ... Setting up file (1:5.47-4) ... Setting up libelf1t64:amd64 (0.195-1) ... Setting up libkrb5support0:amd64 (1.22.1-3) ... Setting up tzdata (2026b-1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Jun 26 22:25:57 UTC 2026. Universal Time is now: Fri Jun 26 22:25:57 UTC 2026. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20240727.1+nmu1) ... Setting up libexpat1-dev:amd64 (2.8.2-1) ... Setting up libsqlite3-dev:amd64 (3.53.2-1) ... Setting up comerr-dev:amd64 (2.1-1.47.4-1) ... Setting up libssl-dev:amd64 (3.6.3-1) ... Setting up autopoint (1.0-1) ... Setting up pkgconf-bin (2.5.1-4) ... Setting up libk5crypto3:amd64 (1.22.1-3) ... Setting up libjs-sphinxdoc (9.1.0-4) ... Setting up autoconf (2.73-2) ... Setting up zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.2-3) ... Setting up dwz (0.16-4) ... Setting up sensible-utils (0.0.26) ... Setting up libdb5.3-dev (5.3.28+dfsg2-11+b1) ... Setting up libcrypt-dev:amd64 (1:4.5.1-1+b1) ... Setting up libuchardet0:amd64 (0.0.8-2+b2) ... Setting up libcap-ng-dev:amd64 (0.9.3-1) ... Setting up bison (2:3.8.2+dfsg-1+b3) ... update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode Setting up netbase (6.5) ... Setting up libkrb5-3:amd64 (1.22.1-3) ... Setting up libpython3.13-stdlib:amd64 (3.13.14-1) ... Setting up libcanlock3:amd64 (3.3.1-1+b2) ... Setting up libsystemd-dev:amd64 (261-1) ... Setting up libpython3-stdlib:amd64 (3.13.9-3+b1) ... Setting up libpython3.13:amd64 (3.13.14-1) ... Setting up automake (1:1.18.1-4) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.1-1) ... Setting up libcanlock-dev:amd64 (3.3.1-1+b2) ... Setting up flex (2.6.4-8.2+b5) ... Setting up gettext (1.0-1) ... Setting up libtool (2.5.4-11) ... Setting up python3.13 (3.13.14-1) ... Setting up libaudit-dev:amd64 (1:4.1.2-1+b1) ... Setting up libperl-dev:amd64 (5.44.0~rc1-1) ... Setting up python3 (3.13.9-3+b1) ... Setting up pkgconf:amd64 (2.5.1-4) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (22) ... Setting up libsasl2-dev (2.1.28+dfsg1-11) ... Setting up libdb-dev:amd64 (5.3.4+b1) ... Setting up libpython3.13-dev:amd64 (3.13.14-1) ... Setting up libgssapi-krb5-2:amd64 (1.22.1-3) ... Setting up dh-strip-nondeterminism (1.15.1-1) ... Setting up groff-base (1.24.1-1) ... Setting up libpython3-dev:amd64 (3.13.9-3+b1) ... Setting up libpam0g-dev:amd64 (1.7.0-6) ... Setting up python3.13-dev (3.13.14-1) ... Setting up po-debconf (1.0.22) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up libgssrpc4t64:amd64 (1.22.1-3) ... Setting up python3-dev (3.13.9-3+b1) ... Setting up libkadm5clnt-mit12:amd64 (1.22.1-3) ... Setting up libkdb5-10t64:amd64 (1.22.1-3) ... Setting up debhelper (14.2) ... Setting up libkadm5srv-mit12:amd64 (1.22.1-3) ... Setting up krb5-multidev:amd64 (1.22.1-3) ... Setting up libkrb5-dev:amd64 (1.22.1-3) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.42-17) ... +------------------------------------------------------------------------------+ | Check architectures Fri, 26 Jun 2026 22:25:58 +0000 | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in any) +------------------------------------------------------------------------------+ | Build environment Fri, 26 Jun 2026 22:25:58 +0000 | +------------------------------------------------------------------------------+ Kernel: Linux 7.0.10+deb14-amd64 #1 SMP PREEMPT_DYNAMIC Debian 7.0.10-1 (2026-05-27) amd64 (x86_64) Toolchain package versions: binutils_2.46.50.20260617-1 dpkg-dev_1.23.7 g++-15_15.3.0-1 gcc-15_15.3.0-1 libc6-dev_2.42-17 libstdc++-15-dev_15.3.0-1 libstdc++6_16.1.0-2 linux-libc-dev_7.0.13-1 Package versions: apt_3.3.1 autoconf_2.73-2 automake_1:1.18.1-4 autopoint_1.0-1 autotools-dev_20240727.1+nmu1 base-files_14.2 base-passwd_3.6.8 bash_5.3-3 binutils_2.46.50.20260617-1 binutils-common_2.46.50.20260617-1 binutils-x86-64-linux-gnu_2.46.50.20260617-1 bison_2:3.8.2+dfsg-1+b3 bsdextrautils_2.42.2-1 build-essential_12.12 bzip2_1.0.8-6+b2 comerr-dev_2.1-1.47.4-1 coreutils_9.10-1 cpp_4:15.2.0-5+b1 cpp-15_15.3.0-1 cpp-15-x86-64-linux-gnu_15.3.0-1 cpp-x86-64-linux-gnu_4:15.2.0-5+b1 dash_0.5.12-12 debconf_1.5.92 debhelper_14.2 debian-archive-keyring_2025.1 debianutils_5.23.2 dh-autoreconf_22 dh-strip-nondeterminism_1.15.1-1 diffutils_1:3.12-1 dirmngr_2.4.9-5 dpkg_1.23.7 dpkg-dev_1.23.7 dwz_0.16-4 eatmydata_131-2 file_1:5.47-4 findutils_4.10.0-4 flex_2.6.4-8.2+b5 g++_4:15.2.0-5+b1 g++-15_15.3.0-1 g++-15-x86-64-linux-gnu_15.3.0-1 g++-x86-64-linux-gnu_4:15.2.0-5+b1 gcc_4:15.2.0-5+b1 gcc-15_15.3.0-1 gcc-15-base_15.3.0-1 gcc-15-x86-64-linux-gnu_15.3.0-1 gcc-16-base_16.1.0-2 gcc-x86-64-linux-gnu_4:15.2.0-5+b1 gettext_1.0-1 gettext-base_1.0-1 gnupg_2.4.9-5 gnupg-l10n_2.4.9-5 gpg_2.4.9-5 gpg-agent_2.4.9-5 gpgconf_2.4.9-5 gpgsm_2.4.9-5 grep_3.12-1 groff-base_1.24.1-1 gzip_1.13-1 hostname_3.25 init-system-helpers_1.69 intltool-debian_0.35.0+20060710.6 krb5-multidev_1.22.1-3 libacl1_2.3.2-3 libapt-pkg7.0_3.3.1 libarchive-zip-perl_1.68-1 libasan8_16.1.0-2 libassuan9_3.0.2-2+b2 libatomic1_16.1.0-2 libattr1_1:2.5.2-4 libaudit-common_1:4.1.2-1 libaudit-dev_1:4.1.2-1+b1 libaudit1_1:4.1.2-1+b1 libbinutils_2.46.50.20260617-1 libblkid1_2.42.2-1 libbz2-1.0_1.0.8-6+b2 libc-bin_2.42-17 libc-dev-bin_2.42-17 libc-gconv-modules-extra_2.42-17 libc6_2.42-17 libc6-dev_2.42-17 libcanlock-dev_3.3.1-1+b2 libcanlock3_3.3.1-1+b2 libcap-ng-dev_0.9.3-1 libcap-ng0_0.9.3-1 libcc1-0_16.1.0-2 libcom-err2_1.47.4-1 libcrypt-dev_1:4.5.1-1+b1 libcrypt1_1:4.5.1-1+b1 libctf-nobfd0_2.46.50.20260617-1 libctf0_2.46.50.20260617-1 libdb-dev_5.3.4+b1 libdb5.3-dev_5.3.28+dfsg2-11+b1 libdb5.3t64_5.3.28+dfsg2-11+b1 libdebconfclient0_0.283 libdebhelper-perl_14.2 libdpkg-perl_1.23.7 libeatmydata1_131-2+b2 libelf1t64_0.195-1 libexpat1_2.8.2-1 libexpat1-dev_2.8.2-1 libffi8_3.5.2-4 libfile-stripnondeterminism-perl_1.15.1-1 libgcc-15-dev_15.3.0-1 libgcc-s1_16.1.0-2 libgcrypt20_1.12.2-1 libgdbm-compat4t64_1.26-1+b2 libgdbm6t64_1.26-1+b2 libgmp10_2:6.3.0+dfsg-5+b2 libgnutls30t64_3.8.13-1 libgomp1_16.1.0-2 libgpg-error0_1.61-3 libgprofng0_2.46.50.20260617-1 libgssapi-krb5-2_1.22.1-3 libgssrpc4t64_1.22.1-3 libhogweed6t64_3.10.2-1+b1 libhwasan0_16.1.0-2 libidn2-0_2.3.8-5 libisl23_0.27-2 libitm1_16.1.0-2 libjansson4_2.15.0-1 libjs-sphinxdoc_9.1.0-4 libk5crypto3_1.22.1-3 libkadm5clnt-mit12_1.22.1-3 libkadm5srv-mit12_1.22.1-3 libkdb5-10t64_1.22.1-3 libkeyutils1_1.6.3-6+b2 libkrb5-3_1.22.1-3 libkrb5-dev_1.22.1-3 libkrb5support0_1.22.1-3 libksba8_1.8.0-3 libldap2_2.6.13+dfsg-1 liblsan0_16.1.0-2 liblz4-1_1.10.0-10 liblzma5_5.8.3-1 libmagic-mgc_1:5.47-4 libmagic1t64_1:5.47-4 libmd0_1.2.0-2 libmount1_2.42.2-1 libmpc3_1.3.1-3 libmpfr6_4.2.2-3 libncursesw6_6.6+20251231-1+b1 libnettle8t64_3.10.2-1+b1 libnpth0t64_1.8-3+b2 libp11-kit0_0.26.2-3 libpam-modules_1.7.0-6 libpam-modules-bin_1.7.0-6 libpam-runtime_1.7.0-6 libpam0g_1.7.0-6 libpam0g-dev_1.7.0-6 libpcre2-8-0_10.46-1+b2 libperl-dev_5.44.0~rc1-1 libperl5.40_5.40.1-8 libperl5.44_5.44.0~rc1-1 libpipeline1_1.5.8-3 libpkgconf7_2.5.1-4 libpython3-dev_3.13.9-3+b1 libpython3-stdlib_3.13.9-3+b1 libpython3.13_3.13.14-1 libpython3.13-dev_3.13.14-1 libpython3.13-minimal_3.13.14-1 libpython3.13-stdlib_3.13.14-1 libquadmath0_16.1.0-2 libreadline8t64_8.3-4 libsasl2-2_2.1.28+dfsg1-11 libsasl2-dev_2.1.28+dfsg1-11 libsasl2-modules-db_2.1.28+dfsg1-11 libseccomp2_2.6.0-2+b1 libselinux1_3.10-1 libsframe3_2.46.50.20260617-1 libsmartcols1_2.42.2-1 libsqlite3-0_3.53.2-1 libsqlite3-dev_3.53.2-1 libssl-dev_3.6.3-1 libssl3t64_3.6.3-1 libstdc++-15-dev_15.3.0-1 libstdc++6_16.1.0-2 libsystemd-dev_261-1 libsystemd0_261-1 libtasn1-6_4.21.0-2+b1 libtinfo6_6.6+20251231-1+b1 libtool_2.5.4-11 libtsan2_16.1.0-2 libubsan1_16.1.0-2 libuchardet0_0.0.8-2+b2 libudev1_261-1 libunistring5_1.4.2-1 libuuid1_2.42.2-1 libxml2-16_2.15.3+dfsg-1 libxxhash0_0.8.3-2+b2 libzstd1_1.5.7+dfsg-3+b2 linux-libc-dev_7.0.13-1 m4_1.4.21-1 make_4.4.1-3 man-db_2.13.1-1 mawk_1.3.4.20260302-1 media-types_14.0.0 ncurses-base_6.6+20251231-1 ncurses-bin_6.6+20251231-1+b1 netbase_6.5 openssl-provider-legacy_3.6.3-1 patch_2.8-2 perl_5.44.0~rc1-1 perl-base_5.44.0~rc1-1 perl-modules-5.40_5.40.1-8 perl-modules-5.44_5.44.0~rc1-1 pinentry-curses_1.3.2-4 pkgconf_2.5.1-4 pkgconf-bin_2.5.1-4 po-debconf_1.0.22 python3_3.13.9-3+b1 python3-dev_3.13.9-3+b1 python3-minimal_3.13.9-3+b1 python3.13_3.13.14-1 python3.13-dev_3.13.14-1 python3.13-minimal_3.13.14-1 readline-common_8.3-4 rpcsvc-proto_1.4.4-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-3 sensible-utils_0.0.26 sqv_1.3.0-5+b2 sysvinit-utils_3.18-1 tar_1.35+dfsg-4 tzdata_2026b-1 util-linux_2.42.2-1 xz-utils_5.8.3-1 zlib1g_1:1.3.dfsg+really1.3.2-3 zlib1g-dev_1:1.3.dfsg+really1.3.2-3 +------------------------------------------------------------------------------+ | Build Fri, 26 Jun 2026 22:25:58 +0000 | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: inn2 Binary: inn2, inn2-inews, inn2-dev Architecture: any Version: 2.7.4~20260419-1 Maintainer: Marco d'Itri Homepage: https://www.eyrie.org/~eagle/software/inn/ Standards-Version: 4.7.4.1 Vcs-Browser: https://salsa.debian.org/md/inn2 Vcs-Git: https://salsa.debian.org/md/inn2.git Testsuite: autopkgtest Testsuite-Triggers: libipc-system-simple-perl, libpath-tiny-perl, perl, systemd-sysv Build-Depends: debhelper (>= 13.31~), bison, flex, groff-base, libperl-dev, python3-dev:native, libpython3-dev, libdb-dev, libkrb5-dev, libpam0g-dev, libsasl2-dev, libsystemd-dev, pkgconf, libcanlock-dev, libsqlite3-dev, libssl-dev, zlib1g-dev Package-List: inn2 deb news optional arch=any inn2-dev deb devel optional arch=any inn2-inews deb news optional arch=any Checksums-Sha1: 2beef3e3dc57e5d6323eaa12468b6481ea4efab4 1578476 inn2_2.7.4~20260419.orig.tar.xz b15ef2277d0463abab180c6bcb11ffa750ba3ce4 37756 inn2_2.7.4~20260419-1.debian.tar.xz Checksums-Sha256: cd555efb802568ee759b324c37d110b400ef8af6a5a7569fabca3262aa02a0d5 1578476 inn2_2.7.4~20260419.orig.tar.xz d8f887ce8445225814ddf77be60bb31cdaf265ae6f36070451d57ea83e654c48 37756 inn2_2.7.4~20260419-1.debian.tar.xz Files: 11c2ad32ce06e1259170189843347041 1578476 inn2_2.7.4~20260419.orig.tar.xz f756b1ae21e8256e07eb5fc112e5d5e9 37756 inn2_2.7.4~20260419-1.debian.tar.xz Dgit: 450c02bb347847af85fc235f42f3473d8453551c debian archive/debian/2.7.4_20260419-1 https://git.dgit.debian.org/inn2 Git-Tag-Info: tag=9e49a156ff467448de27c3c46c3613d214a1b81a fp=272945cd836d38dfb7427e86cb3ec33ae1ded781 Git-Tag-Tagger: Marco d'Itri -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEN02M5NuW6cvUwJcqYG0ITkaDwHkFAmn75PEACgkQYG0ITkaD wHmqjxAAgAAbyUz20fHrBYzn8T0R189mKMlsfrUetDt5cfs76PdjcBw4wGKz+JwQ 339VxFBpm58iQ/6FqNaA8wrDov5zx3aOfGY3TIP/I0b8GSGH6pF8Y8Y/sVAaW8sG ZPkD9RSD/TosZ0URKAIiozCxDn4+i39AjSvNK3HssT4zQFeRzPIBAIhLE23gxeAV 7fV/pTiXrR4Ks18a2IlR+aXS76uXhyqmmEpTD96xmGvy5gH7k3NnlmEGTu8EJVf4 QoiM2/c/8fgvi9ROXmovBCmH6hICY819c4TLsD4+2dH6Fa/vMoOSUW3vgEcE7T4h y5LndFwoPHIfkhaWVo3VlfB9AxgE/FzQKP5j0kmcJ8DNl9fZKhUcu5zjkErEA47O YZeUgSwi+EkF7Uifsir42Z0Ev4c4toexHNJ008pF4PaqPnG6Mqh6vwo2hyqY71Ul owzvLPzSHbbHN51liymYhyp6OKTRjdhjkwp6sVwtEvKHYzpocrIVZVR7zCtQqA28 vEl4oFSYrNcci6pOfZtbHhib1wkKV9Ps3JkY6hlYm8eQ/Ntbn8KkjBWAS3mCq1xH nqc9ymLjSp5GfCoVyfKFCxh8d0a+D35Hj9DlqZmNhQd2eiOsWMJ8M1VWQRzohP1e +csa4e6laNdjS71o0yJxxeass4zPMwugGjTl7E/f2lqjrUBpMHM= =FeNR -----END PGP SIGNATURE----- dpkg-source: warning: cannot verify inline signature for ./inn2_2.7.4~20260419-1.dsc: missing OpenPGP keyrings dpkg-source: info: verifying ./inn2_2.7.4~20260419-1.dsc dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-keyring.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-tag2upload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-nonupload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-maintainers.pgp dpkg-source: info: extracting inn2 in /build/inn2-sq6OrW/inn2-2.7.4~20260419 dpkg-source: info: unpacking inn2_2.7.4~20260419.orig.tar.xz dpkg-source: info: unpacking inn2_2.7.4~20260419-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying force-autoconf dpkg-source: info: applying reproducible_builds dpkg-source: info: applying extra-scripts dpkg-source: info: applying extra-config dpkg-source: info: applying inncheck-permissions dpkg-source: info: applying rnews-permissions dpkg-source: info: applying dash-unbatch dpkg-source: info: applying no-makedbz-on-install dpkg-source: info: applying motd-conffile-upgrade Install fakeroot ---------------- Setup apt archive ----------------- Merged Build-Depends: fakeroot Filtered Build-Depends: fakeroot dpkg-deb: building package 'sbuild-build-depends-fakeroot-dummy' in '/build/inn2-sq6OrW/resolver-InucQr/apt_archive/sbuild-build-depends-fakeroot-dummy.deb'. Ign:1 copy:/build/inn2-sq6OrW/resolver-InucQr/apt_archive ./ InRelease Get:2 copy:/build/inn2-sq6OrW/resolver-InucQr/apt_archive ./ Release [615 B] Ign:3 copy:/build/inn2-sq6OrW/resolver-InucQr/apt_archive ./ Release.gpg Get:4 copy:/build/inn2-sq6OrW/resolver-InucQr/apt_archive ./ Sources [1393 B] Get:5 copy:/build/inn2-sq6OrW/resolver-InucQr/apt_archive ./ Packages [1452 B] Fetched 3460 B in 0s (0 B/s) Reading package lists... Reading package lists... Install fakeroot build dependencies (apt-based resolver) -------------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: fakeroot libfakeroot The following NEW packages will be installed: fakeroot libfakeroot sbuild-build-depends-fakeroot-dummy 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 105 kB of archives. After this operation, 389 kB of additional disk space will be used. Get:1 copy:/build/inn2-sq6OrW/resolver-InucQr/apt_archive ./ sbuild-build-depends-fakeroot-dummy 0.invalid.0 [832 B] Get:2 http://deb.debian.org/debian unstable/main amd64 libfakeroot amd64 1.38.1-1 [29.3 kB] Get:3 http://deb.debian.org/debian unstable/main amd64 fakeroot amd64 1.38.1-1 [74.9 kB] Fetched 105 kB in 0s (3388 kB/s) Selecting previously unselected package libfakeroot:amd64. (Reading database ... 20151 files and directories currently installed.) Preparing to unpack .../libfakeroot_1.38.1-1_amd64.deb ... Unpacking libfakeroot:amd64 (1.38.1-1) ... Selecting previously unselected package fakeroot. Preparing to unpack .../fakeroot_1.38.1-1_amd64.deb ... Unpacking fakeroot (1.38.1-1) ... Selecting previously unselected package sbuild-build-depends-fakeroot-dummy. Preparing to unpack .../sbuild-build-depends-fakeroot-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-fakeroot-dummy (0.invalid.0) ... Setting up libfakeroot:amd64 (1.38.1-1) ... Setting up fakeroot (1.38.1-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode Setting up sbuild-build-depends-fakeroot-dummy (0.invalid.0) ... Processing triggers for man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Processing triggers for libc-bin (2.42-17) ... clean up apt cache ------------------ Check disk space ---------------- Sufficient free space for build Hack binNMU version ------------------- Created changelog entry for binNMU version 2.7.4~20260419-1+b1 +------------------------------------------------------------------------------+ | Starting Time Build Commands Fri, 26 Jun 2026 22:26:02 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network inn2_2.7.4~20260419-1 perl-5.44 amd64 ------------------------------------------------------------------------------------------------------------ I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network inn2_2.7.4~20260419-1 perl-5.44 amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/build/inn2-sq6OrW/inn2-2.7.4~20260419 SCHROOT_ALIAS_NAME=perl-5.44-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.44-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.44-amd64-debomatic-a8a94cd6-120a-4757-acaa-9bb02cfd982b SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -mDebian Perl autobuilder -B -Zxz dpkg-buildpackage: info: source package inn2 dpkg-buildpackage: info: source version 2.7.4~20260419-1+b1 dpkg-buildpackage: info: source distribution perl-5.44 dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean dh clean --builddirectory=/build/inn2-sq6OrW/inn2-2.7.4~20260419/build debian/rules override_dh_auto_clean make[1]: Entering directory '/build/inn2-sq6OrW/inn2-2.7.4~20260419' rm -rf /build/inn2-sq6OrW/inn2-2.7.4~20260419/build make[1]: Leaving directory '/build/inn2-sq6OrW/inn2-2.7.4~20260419' dh_autoreconf_clean -O--builddirectory=/build/inn2-sq6OrW/inn2-2.7.4\~20260419/build dh_clean -O--builddirectory=/build/inn2-sq6OrW/inn2-2.7.4\~20260419/build debian/rules build-arch dh build-arch --builddirectory=/build/inn2-sq6OrW/inn2-2.7.4~20260419/build dh_update_autotools_config -a -O--builddirectory=/build/inn2-sq6OrW/inn2-2.7.4\~20260419/build debian/rules override_dh_autoreconf make[1]: Entering directory '/build/inn2-sq6OrW/inn2-2.7.4~20260419' # do not run libtoolize because support/ltmain.sh has been customized LIBTOOLIZE=true \ dh_autoreconf autoreconf: export WARNINGS= autoreconf: Entering directory '.' autoreconf: configure.ac: no obvious need to run autopoint autoreconf: running: aclocal --force autoreconf: configure.ac: tracing autoreconf: configure.ac: not running libtoolize: LIBTOOLIZE=true in environment autoreconf: configure.ac: not using Intltool autoreconf: configure.ac: not using Gtkdoc autoreconf: configure.ac: no need to run autopoint (confirmed) autoreconf: running: /usr/bin/autoconf --force autoreconf: running: /usr/bin/autoheader --force autoreconf: configure.ac: not using Automake autoreconf: 'support/install-sh' is updated autoreconf: configure.ac: not running make: --make not given autoreconf: Leaving directory '.' make[1]: Leaving directory '/build/inn2-sq6OrW/inn2-2.7.4~20260419' debian/rules override_dh_auto_configure make[1]: Entering directory '/build/inn2-sq6OrW/inn2-2.7.4~20260419' mkdir -p /build/inn2-sq6OrW/inn2-2.7.4~20260419/build for dir in ./m4 ./innfeed ./readme.pod ./autom4te.cache ./.github ./contrib ./innd ./.git-blame-ignore-revs ./expire ./tests ./support ./lib ./doc ./.perlcriticrc ./MANIFEST ./TODO ./include ./frontends ./.perltidyrc ./extra ./scripts ./.clang-format ./Makefile.global.in ./authprogs ./configure.ac ./backends ./.gitignore ./CONTRIBUTORS ./samples ./aclocal.m4 ./LICENSE ./perl ./Makefile ./history ./BOOTSTRAP ./site ./ci ./storage ./nnrpd ./autogen ./configure ./control; do [ -e /build/inn2-sq6OrW/inn2-2.7.4~20260419/build/$dir ] || cp -ldpR $dir /build/inn2-sq6OrW/inn2-2.7.4~20260419/build; done CONFIG_SHELL=/bin/sh \ BZIP2=/bin/bzip2 \ GZIP=/bin/gzip \ PERL=/usr/bin/perl \ PYTHON=/usr/bin/python3 \ ac_cv_path_AWK=awk \ ac_cv_prog_AWK=awk \ ac_cv_path_CAT=cat \ ac_cv_path_EGREP=egrep \ ac_cv_path_OPENSSL=openssl \ ac_cv_path_SED=sed \ ac_cv_path_SORT=sort \ ac_cv_path_UUSTAT=uustat \ ac_cv_path_UUX=uux \ ac_cv_path_GPGV=/usr/bin/gpgv \ ac_cv_path_GPG=/usr/bin/gpg1 \ ac_cv_path_PATH_GETFTP=wget \ ac_cv_path_PATH_GETHTTP=wget \ dh_auto_configure -- \ --enable-uucp-rnews \ --with-canlock \ --with-perl \ --with-python \ --with-openssl \ --with-sqlite3 \ --prefix=/usr/lib/news \ --libdir=/usr/lib/news \ --mandir=/usr/share/man \ --sysconfdir=/etc/news \ --includedir=/usr/include \ --with-db-dir=/var/lib/news \ --with-filter-dir=/etc/news/filter \ --with-log-dir=/var/log/news \ --with-run-dir=/run/news \ --with-spool-dir=/var/spool/news \ --with-tmp-dir=/var/spool/news/incoming/tmp \ --with-http-dir=/var/www/inn \ --with-libperl-dir=/usr/share/perl5 \ --with-bdb=/usr \ --with-krb5=/usr \ --with-sasl=/usr \ --with-sendmail=/usr/sbin/sendmail \ --with-zlib=/usr \ cd build && ../configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/x86_64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --enable-uucp-rnews --with-canlock --with-perl --with-python --with-openssl --with-sqlite3 --prefix=/usr/lib/news --libdir=/usr/lib/news --mandir=/usr/share/man --sysconfdir=/etc/news --includedir=/usr/include --with-db-dir=/var/lib/news --with-filter-dir=/etc/news/filter --with-log-dir=/var/log/news --with-run-dir=/run/news --with-spool-dir=/var/spool/news --with-tmp-dir=/var/spool/news/incoming/tmp --with-http-dir=/var/www/inn --with-libperl-dir=/usr/share/perl5 --with-bdb=/usr --with-krb5=/usr --with-sasl=/usr --with-sendmail=/usr/sbin/sendmail --with-zlib=/usr configure: Building INN requires the following dependencies to be met, besides a working compiler, a POSIX-compliant shell and GNU make, as well as Autoconf if you're bootstrapping the source code. POSIX-compliant tools like tail, head or sed are required by some checks during configure. Please ensure they are present in the default PATH (for instance on Solaris, /usr/xpg4/bin or /opt/csw/bin should be added to PATH). --- ******************************************* ** Debian and RedHat-based distributions ** ******************************************* The names of the deb and rpm packages are given to help you find them quicker. --- Mandatory (deb / rpm): - bison, flex / byacc, flex (for the innfeed build, if bootstrapping the source code) - perl / perl (for various mandatory Perl scripts) - default-mta / postfix (or any specific MTA, for moderated newsgroups) --- Optional (deb / rpm): - libdb-dev / libdb-devel (--with-bdb for ovdb overview) - libcanlock-dev / libcanlock-devel (--with-canlock for Cancel-Lock support) - libkrb5-dev / krb5-devel (--with-krb5 for a Kerberos v5 authenticator) - libssl-dev / openssl-devel (--with-openssl for TLS support for readers) - libperl-dev / perl-devel, perl-ExtUtils-Embed (--with-perl for Perl-based spam filtering and authentication) - python3-dev, python3 / python3-devel, python3 (--with-python for Python-based spam filtering and authentication) - libsasl2-dev / cyrus-sasl-devel (--with-sasl for SASL authentication support) - libsqlite3-dev / sqlite-devel (--with-sqlite3 for ovsqlite overview) - zlib1g-dev / zlib-devel (--with-zlib for compressed ovdb and ovsqlite, and the COMPRESS command for readers) - libpam0g-dev / pam-devel (for PAM authentication support) - libsystemd-dev, pkg-config / systemd-devel, pkg-config (for systemd notifications and socket activation) --- Though not mandatory for the build, the following packages should be installed if you plan on using the provided features (configure will properly sets their paths in a few variables used by INN): - gnupg / gnupg2 (for the verification of the signatures of control articles and NoCeM messages - GnuPG 1.x or 2.0.x preferred, as GnuPG 2.1.0 and above cannot verify signatures made with old PGP keys still used for some hierarchies) - uucp / uucp (for the exchange of news articles with send-uucp) - wget (for the synchronization of the active file against an external FTP or web server with actsyncd) - various wide-spread programs like a modern awk implementation, grep, gzip (and eventually bzip2 and compress if you want to use other compression methods with send-uucp or rnews), sed and sort, probably already installed on your system, and used by INN in several scripts --- Though not mandatory for the build, the following packages will also be useful: - libgd-perl / perl-GD (for pictures in HTML daily Usenet reports) - libencode-perl, libmime-tools-perl / perl-Encode, perl-MIME-tools (for the decoding of control articles by controlchan) - libdbd-sqlite3-perl / perl-DBD-SQLite (for ovsqlite-util) - cron and syslog, probably already installed on your system --- ***************************************************************** ** FreeBSD packages (and probably also other BSD-like systems) ** ***************************************************************** FreeBSD packages come with development headers by default and dependencies not listed are satisfied by the base FreeBSD system. --- Mandatory FreeBSD packages: - gmake (INN needs to be built using gmake instead of make) - autoconf (generate a configuration script) - libtool (for library creation) - perl5 --- Optional FreeBSD packages: - db18 (--with-bdb --with-bdb-lib=/usr/local/lib/db18 --with-bdb-include=/usr/local/include/db18, the "18" indicates version and can be replaced with another version, for ovdb overview) - krb5 (--with-krb5) - python3 (--with-python) - cyrus-sasl (--with-sasl) - sqlite3 (--with-sqlite3=/usr/local) --- Optional packages provided by FreeBSD base and the ports tree: - openssl (--with-openssl --with-openssl-lib=/usr/local --with-openssl-include=/usr/local if the version from ports is preferable to the one provided by the base system.) --- Runtime optionals (see Linux equivalents above for descriptions): - gnupg - freebsd-uucp - p5-GD - p5-Encode, p5-MIME-Tools - p5-DBD-SQLite --- Unavailable packages (but may now be?): - libcanlock (libcanlock is not yet available in the ports tree and needs manual compilation) --- Happy building! checking for gcc... x86_64-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether x86_64-linux-gnu-gcc accepts -g... yes checking for x86_64-linux-gnu-gcc option to enable C23 features... none needed checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for wchar.h... yes checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking whether _XOPEN_SOURCE should be defined... no checking for library containing strerror... none required checking if x86_64-linux-gnu-gcc supports -c -o file.o... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... (cached) sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... (cached) egrep checking for fgrep... /usr/bin/grep -F checking for ld used by x86_64-linux-gnu-gcc... /usr/bin/x86_64-linux-gnu-ld checking if the linker (/usr/bin/x86_64-linux-gnu-ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/x86_64-linux-gnu-ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ranlib... ranlib checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for gawk... (cached) awk checking command to parse /usr/bin/nm -B output from x86_64-linux-gnu-gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if x86_64-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no checking for x86_64-linux-gnu-gcc option to produce PIC... -fPIC -DPIC checking if x86_64-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes checking if x86_64-linux-gnu-gcc static flag -static works... yes checking if x86_64-linux-gnu-gcc supports -c -o file.o... yes checking if x86_64-linux-gnu-gcc supports -c -o file.o... (cached) yes checking whether the x86_64-linux-gnu-gcc linker (/usr/bin/x86_64-linux-gnu-ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for Perl module Encode... yes checking for Perl module GD... no checking for Perl module MIME::Parser... no checking for flags to link with Perl... -Wl,-E -fstack-protector-strong -L/usr/local/lib -L/usr/lib/x86_64-linux-gnu/perl/5.44/CORE -lperl -ldl -lm -lpthread -lcrypt checking for EXTERN.h... yes checking for perl_alloc... yes checking for flags to link with Python... -L/usr/lib/x86_64-linux-gnu -lpython3.13 -ldl -lm checking for Python.h... yes checking for Py_Initialize... yes checking if pod2text supports --guesswork... yes checking for flex... flex checking for lex output file root... lex.yy checking for lex library... none needed checking whether yytext is a pointer... yes checking whether ln -s works... yes checking whether make sets $(MAKE)... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for ranlib... (cached) ranlib checking for bison... bison -y checking for gawk... (cached) awk checking for egrep... (cached) egrep checking for a sed that does not truncate output... (cached) sed checking for sort... (cached) sort checking for openssl... no checking for uustat... (cached) uustat checking for uux... (cached) uux checking for bzip2... /bin/bzip2 checking for cat... (cached) cat checking for compress... compress checking for gzip... /bin/gzip checking for sendmail... /usr/sbin/sendmail checking for gpgv1... (cached) /usr/bin/gpgv checking for gpg1... (cached) /usr/bin/gpg1 checking for pgpv... no checking for pgp... no checking for pgpgpg... no checking if GnuPG recognizes the --allow-weak-digest-algos flag... yes checking for wget... (cached) wget checking for wget... (cached) wget checking for library containing setproctitle... no checking for pstat... no checking for library containing gethostbyname... none required checking for library containing socket... none required checking for library containing inet_aton... none required checking for library containing crypt... -lcrypt checking for library containing getspnam... none required checking for security/pam_appl.h... yes checking for library containing pam_start... -lpam checking how to run the C preprocessor... x86_64-linux-gnu-gcc -E checking for egrep -e... (cached) egrep checking whether PAM prefers const... yes checking size of long... 8 checking for db.h... yes checking for db_create in -ldb... yes checking for blocklist.h... no checking for libcanlock-3/canlock.h... yes checking for cl_verify_multi in -lcanlock... yes checking for krb5 support in krb5-config... yes checking for --deps support in krb5-config... yes checking for krb5_init_context... yes checking for krb5.h... yes checking for kerberosv5/krb5.h... no checking for krb5/krb5.h... yes checking for krb5_get_error_message... yes checking for krb5_free_error_message... yes checking for openssl/ssl.h... yes checking for library containing dlopen... none required checking for AES_cbc_encrypt in -lcrypto... yes checking for SSL_accept in -lssl... yes checking for sasl/sasl.h... yes checking for sasl_getprop in -lsasl2... yes checking for a sufficiently recent SQLite... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for libsystemd... yes checking for zlib.h... yes checking for compress in -lz... yes checking for working ndbm compatibility layer with Berkeley DB... yes checking for Perl module DBD::SQLite... no checking for _Bool... yes checking for stdbool.h that conforms to C99 or later... yes checking for crypt.h... yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for strings.h... (cached) yes checking for sys/bitypes.h... yes checking for sys/filio.h... no checking for sys/loadavg.h... no checking for sys/select.h... yes checking for sys/time.h... yes checking for sys/uio.h... yes checking for syslog.h... yes checking for unistd.h... (cached) yes checking for ndbm.h... no checking for db1/ndbm.h... no checking for gdbm/ndbm.h... no checking for gdbm-ndbm.h... no checking for x86_64-linux-gnu-gcc options to detect undeclared functions... none needed checking for x86_64-linux-gnu-gcc options to ignore future-version functions... none needed checking whether pread is declared... yes checking whether pwrite is declared... yes checking whether reallocarray is declared... yes checking whether snprintf is declared... yes checking whether setproctitle is declared... no checking whether strlcat is declared... yes checking whether strlcpy is declared... yes checking whether vsnprintf is declared... yes checking whether h_errno is declared... yes checking whether inet_aton is declared... yes checking whether inet_ntoa is declared... yes checking whether altzone is declared... no checking whether byte ordering is bigendian... no checking for an ANSI C-conforming const... yes checking for C99 variadic macros... yes checking for GNU-style variadic macros... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for struct tm.tm_zone... yes checking for struct tm.tm_gmtoff... no checking for struct sockaddr.sa_len... no checking for int8_t... yes checking for int16_t... yes checking for int32_t... yes checking for int64_t... yes checking for uint8_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for unsigned long long int... yes checking for long long int... yes checking for off_t... yes checking for pid_t... yes checking for size_t... yes checking for ssize_t... yes checking for uintptr_t... yes checking for uid_t... yes E: ABORT: Received TERM signal (requesting cleanup and shutdown) checking for gid_t... -------------------------------------------------------------------------------- Build finished at 2026-06-26T22:26:17Z Finished -------- +------------------------------------------------------------------------------+ | Cleanup Fri, 26 Jun 2026 22:26:18 +0000 | +------------------------------------------------------------------------------+ Purging /build/inn2-sq6OrW Not cleaning session: cloned chroot in use E: ABORT: Received TERM signal (requesting cleanup and shutdown) E: Build failure (dpkg-buildpackage died with exit 1) +------------------------------------------------------------------------------+ | Summary Fri, 26 Jun 2026 22:26:19 +0000 | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: any Build-Space: 18136 Build-Time: 15 Distribution: perl-5.44 Fail-Stage: build Host Architecture: amd64 Install-Time: 9 Job: /srv/debomatic/incoming/inn2_2.7.4~20260419-1.dsc Machine Architecture: amd64 Package: inn2 Package-Time: 34 Source-Version: 2.7.4~20260419-1 Space: 18136 Status: attempted Version: 2.7.4~20260419-1+b1 -------------------------------------------------------------------------------- Finished at 2026-06-26T22:26:17Z Build needed 00:00:34, 18136k disk space