sbuild (Debian sbuild) 0.91.9 (05 May 2026) on carme.larted.org.uk +==============================================================================+ | libsystem-command-perl 1.122-1 (amd64) Sun, 28 Jun 2026 23:50:58 +0000 | +==============================================================================+ Package: libsystem-command-perl Version: 1.122-1 Source Version: 1.122-1 Distribution: perl-5.44-throwaway Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: Setting up the chroot... I: Creating chroot session... I: Setting up log color... +------------------------------------------------------------------------------+ | Chroot Setup Commands Sun, 28 Jun 2026 23:50:59 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libsystem-command-perl_1.122-1 perl-5.44-throwaway amd64 ------------------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libsystem-command-perl_1.122-1 perl-5.44-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: Setting up apt archive... +------------------------------------------------------------------------------+ | Update chroot Sun, 28 Jun 2026 23:50:59 +0000 | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.44 InRelease [3039 B] Get:1 file:/srv/reprepro perl-5.44 InRelease [3039 B] Hit:2 http://deb.debian.org/debian unstable InRelease Hit:3 http://deb.debian.org/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files Sun, 28 Jun 2026 23:51:01 +0000 | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/libsystem-command-perl_1.122-1.dsc exists in /srv/debomatic/incoming; copying to chroot +------------------------------------------------------------------------------+ | Install package build dependencies Sun, 28 Jun 2026 23:51:01 +0000 | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 13), build-essential, libtest-command-perl, libtest-output-perl, perl Filtered Build-Depends: debhelper-compat (= 13), build-essential, libtest-command-perl, libtest-output-perl, perl dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/build/libsystem-command-perl-vNQL8D/resolver-SMd9lg/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/build/libsystem-command-perl-vNQL8D/resolver-SMd9lg/apt_archive ./ InRelease Get:2 copy:/build/libsystem-command-perl-vNQL8D/resolver-SMd9lg/apt_archive ./ Release [609 B] Ign:3 copy:/build/libsystem-command-perl-vNQL8D/resolver-SMd9lg/apt_archive ./ Release.gpg Get:4 copy:/build/libsystem-command-perl-vNQL8D/resolver-SMd9lg/apt_archive ./ Sources [691 B] Get:5 copy:/build/libsystem-command-perl-vNQL8D/resolver-SMd9lg/apt_archive ./ Packages [688 B] Fetched 1988 B in 0s (194 kB/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libcapture-tiny-perl libdebhelper-perl libelf1t64 libfile-stripnondeterminism-perl libmagic-mgc libmagic1t64 libpipeline1 libtest-command-perl libtest-output-perl libtool libuchardet0 libxml2-16 m4 man-db po-debconf sensible-utils Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev gnulib-l10n groff libtool-doc gfortran | fortran95-compiler m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx python3:any libarchive-cpio-perl libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libcapture-tiny-perl libdebhelper-perl libelf1t64 libfile-stripnondeterminism-perl libmagic-mgc libmagic1t64 libpipeline1 libtest-command-perl libtest-output-perl libtool libuchardet0 libxml2-16 m4 man-db po-debconf sbuild-build-depends-main-dummy sensible-utils 0 upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 11.9 MB of archives. After this operation, 54.5 MB of additional disk space will be used. Get:1 copy:/build/libsystem-command-perl-vNQL8D/resolver-SMd9lg/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [876 B] Get:2 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.26 [27.0 kB] Get:3 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.47-4 [345 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.47-4 [111 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.47-4 [43.0 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 1.0-1 [332 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-2+b2 [69.0 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.24.1-1 [1336 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.42.2-1 [100.0 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-3 [49.2 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.21-1 [332 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.73-2 [516 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1+nmu1 [60.0 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.18.1-4 [877 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 autopoint all 1.0-1 [820 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 14.2 [77.1 kB] Get:18 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-11 [539 kB] Get:19 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 22 [12.2 kB] Get:20 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:21 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.15.1-1 [17.1 kB] Get:22 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.15.1-1 [6020 B] Get:23 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.195-1 [58.1 kB] Get:24 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.16-4 [108 kB] Get:25 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.15.3+dfsg-1 [642 kB] Get:26 http://deb.debian.org/debian unstable/main amd64 gettext amd64 1.0-1 [2660 kB] Get:27 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:28 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.22 [216 kB] Get:29 http://deb.debian.org/debian unstable/main amd64 debhelper all 14.2 [933 kB] Get:30 http://deb.debian.org/debian unstable/main amd64 libcapture-tiny-perl all 0.50-1 [24.6 kB] Get:31 http://deb.debian.org/debian unstable/main amd64 libtest-command-perl all 0.11-5 [14.1 kB] Get:32 http://deb.debian.org/debian unstable/main amd64 libtest-output-perl all 1.036-1 [16.5 kB] Preconfiguring packages ... Fetched 11.9 MB in 0s (92.4 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 14525 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.47-4_amd64.deb ... Unpacking libmagic-mgc (1:5.47-4) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.47-4_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.47-4) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.47-4_amd64.deb ... Unpacking file (1:5.47-4) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_1.0-1_amd64.deb ... Unpacking gettext-base (1.0-1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-2+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-2+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.24.1-1_amd64.deb ... Unpacking groff-base (1.24.1-1) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.42.2-1_amd64.deb ... Unpacking bsdextrautils (2.42.2-1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-3_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-3) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.21-1_amd64.deb ... Unpacking m4 (1.4.21-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.73-2_all.deb ... Unpacking autoconf (2.73-2) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1+nmu1_all.deb ... Unpacking autotools-dev (20240727.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-4_all.deb ... Unpacking automake (1:1.18.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_1.0-1_all.deb ... Unpacking autopoint (1.0-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_14.2_all.deb ... Unpacking libdebhelper-perl (14.2) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-11_all.deb ... Unpacking libtool (2.5.4-11) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_22_all.deb ... Unpacking dh-autoreconf (22) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.1-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.195-1_amd64.deb ... Unpacking libelf1t64:amd64 (0.195-1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-4_amd64.deb ... Unpacking dwz (0.16-4) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../23-libxml2-16_2.15.3+dfsg-1_amd64.deb ... Unpacking libxml2-16:amd64 (2.15.3+dfsg-1) ... Selecting previously unselected package gettext. Preparing to unpack .../24-gettext_1.0-1_amd64.deb ... Unpacking gettext (1.0-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../25-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../26-po-debconf_1.0.22_all.deb ... Unpacking po-debconf (1.0.22) ... Selecting previously unselected package debhelper. Preparing to unpack .../27-debhelper_14.2_all.deb ... Unpacking debhelper (14.2) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../28-libcapture-tiny-perl_0.50-1_all.deb ... Unpacking libcapture-tiny-perl (0.50-1) ... Selecting previously unselected package libtest-command-perl. Preparing to unpack .../29-libtest-command-perl_0.11-5_all.deb ... Unpacking libtest-command-perl (0.11-5) ... Selecting previously unselected package libtest-output-perl. Preparing to unpack .../30-libtest-output-perl_1.036-1_all.deb ... Unpacking libtest-output-perl (1.036-1) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../31-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.8-3) ... Setting up bsdextrautils (2.42.2-1) ... Setting up libtest-command-perl (0.11-5) ... Setting up libmagic-mgc (1:5.47-4) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:amd64 (2.15.3+dfsg-1) ... Setting up libdebhelper-perl (14.2) ... Setting up libmagic1t64:amd64 (1:5.47-4) ... Setting up gettext-base (1.0-1) ... Setting up m4 (1.4.21-1) ... Setting up file (1:5.47-4) ... Setting up libelf1t64:amd64 (0.195-1) ... Setting up autotools-dev (20240727.1+nmu1) ... Setting up autopoint (1.0-1) ... Setting up autoconf (2.73-2) ... Setting up libcapture-tiny-perl (0.50-1) ... Setting up dwz (0.16-4) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:amd64 (0.0.8-2+b2) ... Setting up automake (1:1.18.1-4) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.1-1) ... Setting up gettext (1.0-1) ... Setting up libtool (2.5.4-11) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (22) ... Setting up libtest-output-perl (1.036-1) ... Setting up dh-strip-nondeterminism (1.15.1-1) ... Setting up groff-base (1.24.1-1) ... Setting up po-debconf (1.0.22) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (14.2) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.42-17) ... +------------------------------------------------------------------------------+ | Check architectures Sun, 28 Jun 2026 23:51:06 +0000 | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Build environment Sun, 28 Jun 2026 23:51:06 +0000 | +------------------------------------------------------------------------------+ Kernel: Linux 7.0.10+deb14-amd64 #1 SMP PREEMPT_DYNAMIC Debian 7.0.10-1 (2026-05-27) amd64 (x86_64) Toolchain package versions: binutils_2.46.50.20260617-1 dpkg-dev_1.23.7 g++-15_15.3.0-1 gcc-15_15.3.0-1 libc6-dev_2.42-17 libstdc++-15-dev_15.3.0-1 libstdc++6_16.1.0-2 linux-libc-dev_7.0.13-1 Package versions: apt_3.3.1 autoconf_2.73-2 automake_1:1.18.1-4 autopoint_1.0-1 autotools-dev_20240727.1+nmu1 base-files_14.2 base-passwd_3.6.8 bash_5.3-3 binutils_2.46.50.20260617-1 binutils-common_2.46.50.20260617-1 binutils-x86-64-linux-gnu_2.46.50.20260617-1 bsdextrautils_2.42.2-1 build-essential_12.12 bzip2_1.0.8-6+b2 coreutils_9.10-1 cpp_4:15.2.0-5+b1 cpp-15_15.3.0-1 cpp-15-x86-64-linux-gnu_15.3.0-1 cpp-x86-64-linux-gnu_4:15.2.0-5+b1 dash_0.5.12-12 debconf_1.5.92 debhelper_14.2 debian-archive-keyring_2025.1 debianutils_5.23.2 dh-autoreconf_22 dh-strip-nondeterminism_1.15.1-1 diffutils_1:3.12-1 dirmngr_2.4.9-5 dpkg_1.23.7 dpkg-dev_1.23.7 dwz_0.16-4 eatmydata_131-2 file_1:5.47-4 findutils_4.10.0-4 g++_4:15.2.0-5+b1 g++-15_15.3.0-1 g++-15-x86-64-linux-gnu_15.3.0-1 g++-x86-64-linux-gnu_4:15.2.0-5+b1 gcc_4:15.2.0-5+b1 gcc-15_15.3.0-1 gcc-15-base_15.3.0-1 gcc-15-x86-64-linux-gnu_15.3.0-1 gcc-16-base_16.1.0-2 gcc-x86-64-linux-gnu_4:15.2.0-5+b1 gettext_1.0-1 gettext-base_1.0-1 gnupg_2.4.9-5 gnupg-l10n_2.4.9-5 gpg_2.4.9-5 gpg-agent_2.4.9-5 gpgconf_2.4.9-5 gpgsm_2.4.9-5 grep_3.12-1 groff-base_1.24.1-1 gzip_1.13-1 hostname_3.25 init-system-helpers_1.69 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-3 libapt-pkg7.0_3.3.1 libarchive-zip-perl_1.68-1 libasan8_16.1.0-2 libassuan9_3.0.2-2+b2 libatomic1_16.1.0-2 libattr1_1:2.5.2-4 libaudit-common_1:4.1.2-1 libaudit1_1:4.1.2-1+b1 libbinutils_2.46.50.20260617-1 libblkid1_2.42.2-1 libbz2-1.0_1.0.8-6+b2 libc-bin_2.42-17 libc-dev-bin_2.42-17 libc-gconv-modules-extra_2.42-17 libc6_2.42-17 libc6-dev_2.42-17 libcap-ng0_0.9.3-1 libcapture-tiny-perl_0.50-1 libcc1-0_16.1.0-2 libcrypt1_1:4.5.1-1+b1 libctf-nobfd0_2.46.50.20260617-1 libctf0_2.46.50.20260617-1 libdb5.3t64_5.3.28+dfsg2-11+b1 libdebconfclient0_0.283 libdebhelper-perl_14.2 libdpkg-perl_1.23.7 libeatmydata1_131-2+b2 libelf1t64_0.195-1 libffi8_3.5.2-4 libfile-stripnondeterminism-perl_1.15.1-1 libgcc-15-dev_15.3.0-1 libgcc-s1_16.1.0-2 libgcrypt20_1.12.2-1 libgdbm-compat4t64_1.26-1+b2 libgdbm6t64_1.26-1+b2 libgmp10_2:6.3.0+dfsg-5+b2 libgnutls30t64_3.8.13-1 libgomp1_16.1.0-2 libgpg-error0_1.61-3 libgprofng0_2.46.50.20260617-1 libhogweed6t64_3.10.2-1+b1 libhwasan0_16.1.0-2 libidn2-0_2.3.8-5 libisl23_0.27-2 libitm1_16.1.0-2 libjansson4_2.15.0-1 libksba8_1.8.0-3 libldap2_2.6.13+dfsg-1+b1 liblsan0_16.1.0-2 liblz4-1_1.10.0-10 liblzma5_5.8.3-1 libmagic-mgc_1:5.47-4 libmagic1t64_1:5.47-4 libmd0_1.2.0-2 libmount1_2.42.2-1 libmpc3_1.3.1-3 libmpfr6_4.2.2-3 libncursesw6_6.6+20251231-1+b1 libnettle8t64_3.10.2-1+b1 libnpth0t64_1.8-3+b2 libp11-kit0_0.26.2-3 libpam-modules_1.7.0-6 libpam-modules-bin_1.7.0-6 libpam-runtime_1.7.0-6 libpam0g_1.7.0-6 libpcre2-8-0_10.46-1+b2 libperl5.40_5.40.1-8 libperl5.44_5.44.0~rc1-1 libpipeline1_1.5.8-3 libquadmath0_16.1.0-2 libreadline8t64_8.3-4 libsasl2-2_2.1.28+dfsg1-11 libsasl2-modules-db_2.1.28+dfsg1-11 libseccomp2_2.6.0-2+b1 libselinux1_3.10-1 libsframe3_2.46.50.20260617-1 libsmartcols1_2.42.2-1 libsqlite3-0_3.53.3-1 libssl3t64_3.6.3-1 libstdc++-15-dev_15.3.0-1 libstdc++6_16.1.0-2 libsystemd0_261.1-2 libtasn1-6_4.21.0-2+b1 libtest-command-perl_0.11-5 libtest-output-perl_1.036-1 libtinfo6_6.6+20251231-1+b1 libtool_2.5.4-11 libtsan2_16.1.0-2 libubsan1_16.1.0-2 libuchardet0_0.0.8-2+b2 libudev1_261.1-2 libunistring5_1.4.2-1 libuuid1_2.42.2-1 libxml2-16_2.15.3+dfsg-1 libxxhash0_0.8.3-2+b2 libzstd1_1.5.7+dfsg-3+b2 linux-libc-dev_7.0.13-1 m4_1.4.21-1 make_4.4.1-3 man-db_2.13.1-1 mawk_1.3.4.20260302-1 ncurses-base_6.6+20251231-1 ncurses-bin_6.6+20251231-1+b1 openssl-provider-legacy_3.6.3-1 patch_2.8-2 perl_5.44.0~rc1-1 perl-base_5.44.0~rc1-1 perl-modules-5.40_5.40.1-8 perl-modules-5.44_5.44.0~rc1-1 pinentry-curses_1.3.2-4 po-debconf_1.0.22 readline-common_8.3-4 rpcsvc-proto_1.4.4-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-3 sensible-utils_0.0.26 sqv_1.4.0-1 sysvinit-utils_3.18-1 tar_1.35+dfsg-4 util-linux_2.42.2-1 xz-utils_5.8.3-1 zlib1g_1:1.3.dfsg+really1.3.2-3 +------------------------------------------------------------------------------+ | Build Sun, 28 Jun 2026 23:51:06 +0000 | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libsystem-command-perl Binary: libsystem-command-perl Architecture: all Version: 1.122-1 Maintainer: Debian Perl Group Uploaders: gregor herrmann Homepage: https://metacpan.org/release/System-Command Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libsystem-command-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libsystem-command-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: libtest-command-perl , libtest-output-perl , perl Package-List: libsystem-command-perl deb perl optional arch=all Checksums-Sha1: 28cf85ef3cef27b14ffa698c4bb190abf860b211 31584 libsystem-command-perl_1.122.orig.tar.gz c9baccce07c1c87657a12ee1e4f1e79d39dec569 3164 libsystem-command-perl_1.122-1.debian.tar.xz Checksums-Sha256: d9b823b26619aa69f7a0616650a7810e895a8df062de9d2240d65dbe5cfe747a 31584 libsystem-command-perl_1.122.orig.tar.gz 76b205d4ea56ea28453f9c72208492756f0dcfa90f6af127694b89f82c0ed982 3164 libsystem-command-perl_1.122-1.debian.tar.xz Files: cb58d220ab7535267b34269ec36cdcdf 31584 libsystem-command-perl_1.122.orig.tar.gz e4bf3830a9147965afab29dd4121b784 3164 libsystem-command-perl_1.122-1.debian.tar.xz Dgit: 563b9bf957bb37ef5526446b9281161e9864d9e2 debian archive/debian/1.122-1 https://git.dgit.debian.org/libsystem-command-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmPmmulfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgZCkw//YvOvGSlfQp2Mae+xuJOs9Z34R2yMbOsSvPUT5q9uJfDQHA15YBuiln2h its0YPSLxm6lsc0RUp67K8TvZ8E7+HqE5G8VZY881ztGGpnunbJjr41LT+0qVHtg BXmCibAgztbP8AMsZ/9Y3fAwMuLfT2VssMZCzltohxg1fWrC02nK53+UDgMZRqUv htgjAAOBM8qOphMTc9wjYaFm211XbqamFAbHlSghE1MalmuUlOPb9xxzMw3wFIdu 6X8RPP5kMMRxugSE1yg2WlOcJaNNgjQuKi9whi2xkggUPN5QP7AGbY0z4b2K/Q6u /OV5uBes6MfRjdof1I1yTHiexFWXNDvCIze0H5/2Pd/xNgTm/uJ5ANchlsogwQK7 zTyvUlBRo6XCumu19UO9IZtCXc1nVdW+rjTFyOgKzQthVJu6cqU8g9ir1ZWQ7fgx JKob71J0/s29QITEWalEjHmmzt956aXfqtBssWF3KfpIiqckJpjmDcUn4m2tj6NA VISl211xPTqMCA6QhwIgvH1L9EDIYxkOk/HwsXbTH2gdJe60k3MOIc93iYAE+cfh mHJgXvLhfGQS+F/R8ghmpI3pLtI2dFSR/EMHZGdJqdDKqdjWebt3T4b2IZMGDbi2 Jrk+kmFUT8Th3mZeWR0DNliU0GzSTO56vNfbXaMDTKSlH7x4smw= =8due -----END PGP SIGNATURE----- dpkg-source: warning: cannot verify inline signature for ./libsystem-command-perl_1.122-1.dsc: missing OpenPGP keyrings dpkg-source: info: verifying ./libsystem-command-perl_1.122-1.dsc dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-keyring.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-tag2upload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-nonupload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-maintainers.pgp dpkg-source: info: extracting libsystem-command-perl in /build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122 dpkg-source: info: unpacking libsystem-command-perl_1.122.orig.tar.gz dpkg-source: info: unpacking libsystem-command-perl_1.122-1.debian.tar.xz clean up apt cache ------------------ Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Time Build Commands Sun, 28 Jun 2026 23:51:06 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libsystem-command-perl_1.122-1 perl-5.44-throwaway amd64 ------------------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libsystem-command-perl_1.122-1 perl-5.44-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122 SCHROOT_ALIAS_NAME=perl-5.44-throwaway-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.44-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.44-amd64-debomatic-ce2b3cff-b41d-4fbc-915b-d42a2fbc16b0 SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -Zxz dpkg-buildpackage: info: source package libsystem-command-perl dpkg-buildpackage: info: source version 1.122-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean dpkg-source -Zxz -b . dpkg-source: info: using source format '3.0 (quilt)' dpkg-source: info: building libsystem-command-perl using existing ../libsystem-command-perl_1.122.orig.tar.gz dpkg-source: info: building libsystem-command-perl in ../libsystem-command-perl_1.122-1.debian.tar.xz dpkg-source: info: building libsystem-command-perl in ../libsystem-command-perl_1.122-1.dsc debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" LD="x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Warning: prerequisite IPC::Run 0 not found. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for System::Command Writing MYMETA.yml and MYMETA.json dh_auto_build make -j2 make[1]: Entering directory '/build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122' cp lib/System/Command.pm blib/lib/System/Command.pm cp lib/System/Command/Reaper.pm blib/lib/System/Command/Reaper.pm Manifying 2 pod documents make[1]: Leaving directory '/build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122' dh_auto_test make -j2 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... 1..2 ok 1 - System/Command.pm loaded ok ok 2 - System/Command/Reaper.pm loaded ok ok # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.78 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.78 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # ExtUtils::MakeMaker any 7.78 # File::Spec any 3.95 # File::Temp any 0.2312 # IO::Handle any 1.56 # IPC::Open3 any 1.24 # Test::More 0.88 1.302219 # # === Test Recommends === # # Module Want Have # ------------- -------- -------- # CPAN::Meta 2.120900 2.150013 # Test::Command any 0.11 # Test::Output any 1.036 # # === Runtime Requires === # # Module Want Have # ------------ ---- ------- # Carp any 1.54 # Cwd any 3.95 # Data::Dumper any 2.192 # Fcntl any 1.20 # IO::Handle any 1.56 # IO::Select any 1.56 # IPC::Run any missing # List::Util any 1.70 # POSIX any 2.26 # Scalar::Util any 1.70 # Symbol any 1.09 # constant any 1.33 # strict any 1.14 # warnings any 1.78 # # # *** WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING *** # # The following REQUIRED prerequisites were not satisfied: # # IPC::Run is not installed (any version required) # t/00-report-prereqs.t .... 1..1 ok 1 - Reported prereqs ok t/01-load.t .............. 1..10 ok 1 - use System::Command ok 2 - use succeeded ok 3 - use System::Command 'quiet' ok 4 - use succeeded ok 5 - use System::Command -quiet ok 6 - use succeeded ok 7 - use System::Command 'verbose' ok 8 - use failed ok 9 - use System::Command -verbose ok 10 - use failed ok t/10-command.t ........... 1..140 ok 1 - An object of class 'System::Command' isa 'System::Command' ok 2 - A reference of type 'GLOB' isa 'GLOB' ok 3 - stdin opened ok 4 - A reference of type 'GLOB' isa 'GLOB' ok 5 - stdout opened ok 6 - A reference of type 'GLOB' isa 'GLOB' ok 7 - stderr opened ok 8 - cmdline ok 9 - options ok 10 - no errput ok 11 - perl t/info.pl ok 12 - exit 0 (cmd) ok 13 - no signal received (cmd) ok 14 - no core dumped (cmd) ok 15 - exit 0 (reaper) ok 16 - no signal received (reaper) ok 17 - no core dumped (reaper) ok 18 - An object of class 'System::Command' isa 'System::Command' ok 19 - A reference of type 'GLOB' isa 'GLOB' ok 20 - stdin opened ok 21 - A reference of type 'GLOB' isa 'GLOB' ok 22 - stdout opened ok 23 - A reference of type 'GLOB' isa 'GLOB' ok 24 - stderr opened ok 25 - cmdline ok 26 - options ok 27 - no errput ok 28 - perl t/info.pl ok 29 - exit 0 (cmd) ok 30 - no signal received (cmd) ok 31 - no core dumped (cmd) ok 32 - exit 0 (reaper) ok 33 - no signal received (reaper) ok 34 - no core dumped (reaper) ok 35 - An object of class 'System::Command' isa 'System::Command' ok 36 - A reference of type 'GLOB' isa 'GLOB' ok 37 - stdin opened ok 38 - A reference of type 'GLOB' isa 'GLOB' ok 39 - stdout opened ok 40 - A reference of type 'GLOB' isa 'GLOB' ok 41 - stderr opened ok 42 - cmdline ok 43 - options ok 44 - no errput ok 45 - perl t/info.pl ok 46 - exit 0 (cmd) ok 47 - no signal received (cmd) ok 48 - no core dumped (cmd) ok 49 - exit 0 (reaper) ok 50 - no signal received (reaper) ok 51 - no core dumped (reaper) ok 52 - An object of class 'System::Command' isa 'System::Command' ok 53 - A reference of type 'GLOB' isa 'GLOB' ok 54 - stdin opened ok 55 - A reference of type 'GLOB' isa 'GLOB' ok 56 - stdout opened ok 57 - A reference of type 'GLOB' isa 'GLOB' ok 58 - stderr opened ok 59 - cmdline ok 60 - options ok 61 - no errput ok 62 - perl t/info.pl ok 63 - exit 0 (cmd) ok 64 - no signal received (cmd) ok 65 - no core dumped (cmd) ok 66 - exit 0 (reaper) ok 67 - no signal received (reaper) ok 68 - no core dumped (reaper) ok 69 - An object of class 'System::Command' isa 'System::Command' ok 70 - A reference of type 'GLOB' isa 'GLOB' ok 71 - stdin opened ok 72 - A reference of type 'GLOB' isa 'GLOB' ok 73 - stdout opened ok 74 - A reference of type 'GLOB' isa 'GLOB' ok 75 - stderr opened ok 76 - cmdline ok 77 - options ok 78 - no errput ok 79 - perl t/info.pl ok 80 - exit 0 (cmd) ok 81 - no signal received (cmd) ok 82 - no core dumped (cmd) ok 83 - exit 0 (reaper) ok 84 - no signal received (reaper) ok 85 - no core dumped (reaper) ok 86 - An object of class 'System::Command' isa 'System::Command' ok 87 - A reference of type 'GLOB' isa 'GLOB' ok 88 - stdin not opened ok 89 - A reference of type 'GLOB' isa 'GLOB' ok 90 - stdout opened ok 91 - A reference of type 'GLOB' isa 'GLOB' ok 92 - stderr opened ok 93 - cmdline ok 94 - options ok 95 - no errput ok 96 - perl t/info.pl ok 97 - exit 0 (cmd) ok 98 - no signal received (cmd) ok 99 - no core dumped (cmd) ok 100 - exit 0 (reaper) ok 101 - no signal received (reaper) ok 102 - no core dumped (reaper) ok 103 - An object of class 'System::Command' isa 'System::Command' ok 104 - A reference of type 'GLOB' isa 'GLOB' ok 105 - stdin not opened ok 106 - A reference of type 'GLOB' isa 'GLOB' ok 107 - stdout opened ok 108 - A reference of type 'GLOB' isa 'GLOB' ok 109 - stderr opened ok 110 - cmdline ok 111 - options ok 112 - no errput ok 113 - perl t/info.pl ok 114 - exit 0 (cmd) ok 115 - no signal received (cmd) ok 116 - no core dumped (cmd) ok 117 - exit 0 (reaper) ok 118 - no signal received (reaper) ok 119 - no core dumped (reaper) ok 120 - An object of class 'System::Command' isa 'System::Command' ok 121 - A reference of type 'GLOB' isa 'GLOB' ok 122 - stdin opened ok 123 - A reference of type 'GLOB' isa 'GLOB' ok 124 - stdout opened ok 125 - A reference of type 'GLOB' isa 'GLOB' ok 126 - stderr opened ok 127 - cmdline ok 128 - options ok 129 - no errput ok 130 - perl t/info.pl ok 131 - exit 0 (cmd) ok 132 - no signal received (cmd) ok 133 - no core dumped (cmd) ok 134 - exit 0 (reaper) ok 135 - no signal received (reaper) ok 136 - no core dumped (reaper) ok 137 - command failed ok 138 - ... expected error message ok 139 # skip this test only makes sense on Win32 ok 140 # skip this test only makes sense on Win32 ok t/11-spawn-fail.t ........ 1..2 ok 1 - command failed: does-not-exist ok 2 - ... expected error message ok Subroutine System::Command::Reaper::DESTROY redefined at t/15-scope.t line 28. # DESTROY System::Command=HASH(0x560e07cfcc20) # DESTROY System::Command::Reaper=HASH(0x560e07ca7030) # DESTROY System::Command=HASH(0x560e0755d2b8) # DESTROY System::Command::Reaper=HASH(0x560e0755d1c8) # DESTROY System::Command=HASH(0x560e07d44540) # DESTROY System::Command::Reaper=HASH(0x560e07cf4ac0) # DESTROY System::Command=HASH(0x560e07cfca88) # DESTROY System::Command::Reaper=HASH(0x560e0755cf58) # DESTROY System::Command=HASH(0x560e0755d990) # DESTROY System::Command::Reaper=HASH(0x560e0755dc90) # DESTROY System::Command=HASH(0x560e07d44870) # DESTROY System::Command::Reaper=HASH(0x560e07c53048) # DESTROY System::Command=HASH(0x560e07d447f8) # DESTROY System::Command::Reaper=HASH(0x560e0755d540) t/15-scope.t ............. 1..31 ok 1 - No output ok 2 - No errput ok 3 - Destroyed no object yet ok 4 - Destroyed 2 objects ok 5 - ... command object was destroyed ok 6 - ... reaper object was destroyed ok 7 - scope: { $cmd { $fh } { $fh } } ok 8 - scope: { $cmd { $fh } { $fh } } ok 9 - Destroyed no object yet ok 10 - Destroyed 2 objects ok 11 - ... command object was destroyed ok 12 - ... reaper object was destroyed ok 13 - Destroyed 1 object (command) ok 14 - scope: { $fh = cmd->fh } ok 15 - Destroyed 1 object (reaper) ok 16 - Destroyed 2 objects (command + reaper) ok 17 - Destroyed 1 object (command) ok 18 - ... command object was destroyed ok 19 - scope: { $fh = $cmd->fh }; $fh } ok 20 - Destroyed 1 objects (reaper) ok 21 - ... reaper object was destroyed ok 22 - scope: { $cmd { $fh } { $fh } } ok 23 - scope: { $cmd { $fh } { $fh } } ok 24 - Destroyed no object yet ok 25 - Destroyed 2 objects ok 26 - ... command object was destroyed ok 27 - ... reaper object was destroyed ok 28 - Destroyed command object ok 29 - scope: spawn() ok 30 - scope: spawn() ok 31 - Destroyed reaper object ok # $SIG{CHLD} = 'IGNORE' # $cmd->is_terminated should warn # $cmd->close should warn # hunting for zombies t/20-zombie.t ............ 1..32 ok 1 - child still alive ok 2 - no exit status ok 3 - child is dead now ok 4 - exit status collected ok 5 - child is still dead ok 6 - stdout still opened ok 7 - stderr still opened ok 8 - child is still dead ok 9 - stdout closed ok 10 - stderr closed ok 11 - child still alive ok 12 - no exit status ok 13 - Warning about $SIG{CHLD} ok 14 - child was reaped ok 15 - BOGUS exit status collected ok 16 - child is still dead ok 17 - stdout still opened ok 18 - stderr still opened ok 19 - child is still dead ok 20 - stdout closed ok 21 - stderr closed ok 22 - child still alive ok 23 - no exit status ok 24 - Warning about $SIG{CHLD} ok 25 - child was reaped ok 26 - BOGUS exit status collected ok 27 - stdout closed ok 28 - stderr closed ok 29 - process 1423387 is still alive ok 30 - scope: { $fh = cmd->fh } ok 31 - process 1423387 is still alive ok 32 - process 1423387 should be dead ok t/21-loop_on.t ........... 1..8 ok 1 - STDERR line 1 ok 2 - STDERR line 2 ok 3 - STDOUT line 1 ok 4 - STDOUT line 2 ok 5 - STDOUT line 3 ok 6 - STDOUT line 4 ok 7 - Aborted after 5 lines ok 8 - Command still runs ok t/25-refopts.t ........... 1..18 ok 1 - $? >> 8 is 0 ok 2 - $cmd->exit is 0 ok 3 - $exit is 0 ok 4 - $? >> 8 is 1 ok 5 - $cmd->exit is 1 ok 6 - $exit is 1 ok 7 - $? >> 8 is 2 ok 8 - $cmd->exit is 2 ok 9 - $exit is 2 ok 10 - $? >> 8 is 127 ok 11 - $cmd->exit is 127 ok 12 - $exit is 127 ok 13 - $? >> 8 is 128 ok 14 - $cmd->exit is 128 ok 15 - $exit is 128 ok 16 - $? >> 8 is 129 ok 17 - $cmd->exit is 129 ok 18 - $exit is 129 ok t/30-exit.t .............. ok 1 - exit status not clobbered 1..1 ok t/90-command.t ........... 1..2 ok 1 - STDOUT ok 2 - STDERR ok t/90-output.t ............ 1..10 ok 1 - print ok 2 - print STDOUT ok 3 - print STDERR ok 4 - print ok 5 - print STDOUT ok 6 - print STDERR ok 7 - expected command output ok 8 - print ok 9 - print STDOUT ok 10 - print STDERR ok t/author-distmeta.t ...... skipped: these tests are for testing by the author t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author All tests successful. Files=15, Tests=257, 15 wallclock secs ( 0.05 usr 0.02 sys + 1.01 cusr 0.31 csys = 1.39 CPU) Result: PASS make[1]: Leaving directory '/build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libsystem-command-perl/ make -j2 install DESTDIR=/build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122/debian/libsystem-command-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122' Manifying 2 pod documents Installing /build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122/debian/libsystem-command-perl/usr/share/perl5/System/Command.pm Installing /build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122/debian/libsystem-command-perl/usr/share/perl5/System/Command/Reaper.pm Installing /build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122/debian/libsystem-command-perl/usr/share/man/man3/System::Command::Reaper.3pm Installing /build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122/debian/libsystem-command-perl/usr/share/man/man3/System::Command.3pm make[1]: Leaving directory '/build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libsystem-command-perl' in '../libsystem-command-perl_1.122-1_all.deb'. dpkg-genbuildinfo -O../libsystem-command-perl_1.122-1_amd64.buildinfo dpkg-genchanges -O../libsystem-command-perl_1.122-1_amd64.changes dpkg-genchanges: info: including full source code in upload dpkg-source -Zxz --after-build . dpkg-buildpackage: info: full upload (original source is included) -------------------------------------------------------------------------------- Build finished at 2026-06-28T23:51:25Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes Sun, 28 Jun 2026 23:51:25 +0000 | +------------------------------------------------------------------------------+ libsystem-command-perl_1.122-1_amd64.changes: --------------------------------------------- Format: 1.8 Date: Fri, 10 Feb 2023 20:26:38 +0100 Source: libsystem-command-perl Binary: libsystem-command-perl Architecture: source all Version: 1.122-1 Distribution: perl-5.44-throwaway Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libsystem-command-perl - Perl class for running system commands Changes: libsystem-command-perl (1.122-1) unstable; urgency=medium . * Import upstream version 1.122. * Update years of upstream copyright. Checksums-Sha1: 865331da6f6451482189aeeb7b18ed71cdeca5ec 1339 libsystem-command-perl_1.122-1.dsc 28cf85ef3cef27b14ffa698c4bb190abf860b211 31584 libsystem-command-perl_1.122.orig.tar.gz 7394ca75884c5595f80ccc60ccbe03da8c135401 3164 libsystem-command-perl_1.122-1.debian.tar.xz 20c4f5267c4385e7d65e3b2a91eb348227d94061 24392 libsystem-command-perl_1.122-1_all.deb a133ccf90354cfaef1ab21345e3638b195e6f24a 5131 libsystem-command-perl_1.122-1_amd64.buildinfo Checksums-Sha256: aa1e450fb106973d22d74e5693876968c8f9fa8aea8d14cac18e5f178b06d7cb 1339 libsystem-command-perl_1.122-1.dsc d9b823b26619aa69f7a0616650a7810e895a8df062de9d2240d65dbe5cfe747a 31584 libsystem-command-perl_1.122.orig.tar.gz ce3d6d1cb9c1eec9ff09ee8cd43ec705789d4fb0612fd40ba1c9c118c5a3a8ce 3164 libsystem-command-perl_1.122-1.debian.tar.xz 84569b2b337cafafac124265d58aff484e039ad0dd5b9920d740d54622966598 24392 libsystem-command-perl_1.122-1_all.deb 463292443118a33867548541d8f1e79ca357b3b2ccfe50b19723f531f7e3dc15 5131 libsystem-command-perl_1.122-1_amd64.buildinfo Files: 6ee5a7411eb244d38db2a0794659f9fd 1339 perl optional libsystem-command-perl_1.122-1.dsc cb58d220ab7535267b34269ec36cdcdf 31584 perl optional libsystem-command-perl_1.122.orig.tar.gz 4ab63bf697009040dc06e4cb1999ba88 3164 perl optional libsystem-command-perl_1.122-1.debian.tar.xz 78e3d542de37c96dd20d72ac846cdb63 24392 perl optional libsystem-command-perl_1.122-1_all.deb e749c99ddb65422cbb8335f9e8a141de 5131 perl optional libsystem-command-perl_1.122-1_amd64.buildinfo +------------------------------------------------------------------------------+ | Buildinfo Sun, 28 Jun 2026 23:51:25 +0000 | +------------------------------------------------------------------------------+ Format: 1.0 Source: libsystem-command-perl Binary: libsystem-command-perl Architecture: all source Version: 1.122-1 Checksums-Md5: 6ee5a7411eb244d38db2a0794659f9fd 1339 libsystem-command-perl_1.122-1.dsc 78e3d542de37c96dd20d72ac846cdb63 24392 libsystem-command-perl_1.122-1_all.deb Checksums-Sha1: 865331da6f6451482189aeeb7b18ed71cdeca5ec 1339 libsystem-command-perl_1.122-1.dsc 20c4f5267c4385e7d65e3b2a91eb348227d94061 24392 libsystem-command-perl_1.122-1_all.deb Checksums-Sha256: aa1e450fb106973d22d74e5693876968c8f9fa8aea8d14cac18e5f178b06d7cb 1339 libsystem-command-perl_1.122-1.dsc 84569b2b337cafafac124265d58aff484e039ad0dd5b9920d740d54622966598 24392 libsystem-command-perl_1.122-1_all.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Sun, 28 Jun 2026 23:51:24 +0000 Build-Path: /build/libsystem-command-perl-vNQL8D/libsystem-command-perl-1.122 Build-Tainted-By: usr-local-has-programs Installed-Build-Depends: autoconf (= 2.73-2), automake (= 1:1.18.1-4), autopoint (= 1.0-1), autotools-dev (= 20240727.1+nmu1), base-files (= 14.2), base-passwd (= 3.6.8), bash (= 5.3-3), binutils (= 2.46.50.20260617-1), binutils-common (= 2.46.50.20260617-1), binutils-x86-64-linux-gnu (= 2.46.50.20260617-1), bsdextrautils (= 2.42.2-1), build-essential (= 12.12), bzip2 (= 1.0.8-6+b2), coreutils (= 9.10-1), cpp (= 4:15.2.0-5+b1), cpp-15 (= 15.3.0-1), cpp-15-x86-64-linux-gnu (= 15.3.0-1), cpp-x86-64-linux-gnu (= 4:15.2.0-5+b1), dash (= 0.5.12-12), debconf (= 1.5.92), debhelper (= 14.2), debianutils (= 5.23.2), dh-autoreconf (= 22), dh-strip-nondeterminism (= 1.15.1-1), diffutils (= 1:3.12-1), dpkg (= 1.23.7), dpkg-dev (= 1.23.7), dwz (= 0.16-4), file (= 1:5.47-4), findutils (= 4.10.0-4), g++ (= 4:15.2.0-5+b1), g++-15 (= 15.3.0-1), g++-15-x86-64-linux-gnu (= 15.3.0-1), g++-x86-64-linux-gnu (= 4:15.2.0-5+b1), gcc (= 4:15.2.0-5+b1), gcc-15 (= 15.3.0-1), gcc-15-base (= 15.3.0-1), gcc-15-x86-64-linux-gnu (= 15.3.0-1), gcc-16-base (= 16.1.0-2), gcc-x86-64-linux-gnu (= 4:15.2.0-5+b1), gettext (= 1.0-1), gettext-base (= 1.0-1), grep (= 3.12-1), groff-base (= 1.24.1-1), gzip (= 1.13-1), hostname (= 3.25), init-system-helpers (= 1.69), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.3.2-3), libarchive-zip-perl (= 1.68-1), libasan8 (= 16.1.0-2), libatomic1 (= 16.1.0-2), libattr1 (= 1:2.5.2-4), libaudit-common (= 1:4.1.2-1), libaudit1 (= 1:4.1.2-1+b1), libbinutils (= 2.46.50.20260617-1), libblkid1 (= 2.42.2-1), libbz2-1.0 (= 1.0.8-6+b2), libc-bin (= 2.42-17), libc-dev-bin (= 2.42-17), libc-gconv-modules-extra (= 2.42-17), libc6 (= 2.42-17), libc6-dev (= 2.42-17), libcap-ng0 (= 0.9.3-1), libcapture-tiny-perl (= 0.50-1), libcc1-0 (= 16.1.0-2), libcrypt1 (= 1:4.5.1-1+b1), libctf-nobfd0 (= 2.46.50.20260617-1), libctf0 (= 2.46.50.20260617-1), libdb5.3t64 (= 5.3.28+dfsg2-11+b1), libdebconfclient0 (= 0.283), libdebhelper-perl (= 14.2), libdpkg-perl (= 1.23.7), libelf1t64 (= 0.195-1), libfile-stripnondeterminism-perl (= 1.15.1-1), libgcc-15-dev (= 15.3.0-1), libgcc-s1 (= 16.1.0-2), libgdbm-compat4t64 (= 1.26-1+b2), libgdbm6t64 (= 1.26-1+b2), libgmp10 (= 2:6.3.0+dfsg-5+b2), libgomp1 (= 16.1.0-2), libgprofng0 (= 2.46.50.20260617-1), libhwasan0 (= 16.1.0-2), libisl23 (= 0.27-2), libitm1 (= 16.1.0-2), libjansson4 (= 2.15.0-1), liblsan0 (= 16.1.0-2), liblzma5 (= 5.8.3-1), libmagic-mgc (= 1:5.47-4), libmagic1t64 (= 1:5.47-4), libmd0 (= 1.2.0-2), libmount1 (= 2.42.2-1), libmpc3 (= 1.3.1-3), libmpfr6 (= 4.2.2-3), libpam-modules (= 1.7.0-6), libpam-modules-bin (= 1.7.0-6), libpam-runtime (= 1.7.0-6), libpam0g (= 1.7.0-6), libpcre2-8-0 (= 10.46-1+b2), libperl5.44 (= 5.44.0~rc1-1), libpipeline1 (= 1.5.8-3), libquadmath0 (= 16.1.0-2), libseccomp2 (= 2.6.0-2+b1), libselinux1 (= 3.10-1), libsframe3 (= 2.46.50.20260617-1), libsmartcols1 (= 2.42.2-1), libssl3t64 (= 3.6.3-1), libstdc++-15-dev (= 15.3.0-1), libstdc++6 (= 16.1.0-2), libsystemd0 (= 261.1-2), libtest-command-perl (= 0.11-5), libtest-output-perl (= 1.036-1), libtinfo6 (= 6.6+20251231-1+b1), libtool (= 2.5.4-11), libtsan2 (= 16.1.0-2), libubsan1 (= 16.1.0-2), libuchardet0 (= 0.0.8-2+b2), libudev1 (= 261.1-2), libunistring5 (= 1.4.2-1), libuuid1 (= 2.42.2-1), libxml2-16 (= 2.15.3+dfsg-1), libzstd1 (= 1.5.7+dfsg-3+b2), linux-libc-dev (= 7.0.13-1), m4 (= 1.4.21-1), make (= 4.4.1-3), man-db (= 2.13.1-1), mawk (= 1.3.4.20260302-1), ncurses-base (= 6.6+20251231-1), ncurses-bin (= 6.6+20251231-1+b1), openssl-provider-legacy (= 3.6.3-1), patch (= 2.8-2), perl (= 5.44.0~rc1-1), perl-base (= 5.44.0~rc1-1), perl-modules-5.44 (= 5.44.0~rc1-1), po-debconf (= 1.0.22), rpcsvc-proto (= 1.4.4-1), sed (= 4.9-3), sensible-utils (= 0.0.26), sysvinit-utils (= 3.18-1), tar (= 1.35+dfsg-4), util-linux (= 2.42.2-1), xz-utils (= 5.8.3-1), zlib1g (= 1:1.3.dfsg+really1.3.2-3) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LANGUAGE="en_GB:en" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" LD_PRELOAD="libeatmydata.so" SOURCE_DATE_EPOCH="1676057198" +------------------------------------------------------------------------------+ | Package contents Sun, 28 Jun 2026 23:51:25 +0000 | +------------------------------------------------------------------------------+ libsystem-command-perl_1.122-1_all.deb -------------------------------------- new Debian package, version 2.0. size 24392 bytes: control archive=828 bytes. 528 bytes, 14 lines control 559 bytes, 7 lines md5sums Package: libsystem-command-perl Version: 1.122-1 Architecture: all Maintainer: Debian Perl Group Installed-Size: 59 Depends: perl:any Section: perl Priority: optional Multi-Arch: foreign Homepage: https://metacpan.org/release/System-Command Description: Perl class for running system commands System::Command is a class that launches external system commands and return an object representing them, allowing to interact with them through their STDIN, STDOUT and STDERR handles. drwxr-xr-x root/root 0 2023-02-10 19:26 ./ drwxr-xr-x root/root 0 2023-02-10 19:26 ./usr/ drwxr-xr-x root/root 0 2023-02-10 19:26 ./usr/share/ drwxr-xr-x root/root 0 2023-02-10 19:26 ./usr/share/doc/ drwxr-xr-x root/root 0 2023-02-10 19:26 ./usr/share/doc/libsystem-command-perl/ -rw-r--r-- root/root 767 2023-02-10 19:26 ./usr/share/doc/libsystem-command-perl/changelog.Debian.gz -rw-r--r-- root/root 3256 2023-02-04 21:39 ./usr/share/doc/libsystem-command-perl/changelog.gz -rw-r--r-- root/root 1178 2023-02-10 19:26 ./usr/share/doc/libsystem-command-perl/copyright drwxr-xr-x root/root 0 2023-02-10 19:26 ./usr/share/man/ drwxr-xr-x root/root 0 2023-02-10 19:26 ./usr/share/man/man3/ -rw-r--r-- root/root 6233 2023-02-10 19:26 ./usr/share/man/man3/System::Command.3pm.gz -rw-r--r-- root/root 2402 2023-02-10 19:26 ./usr/share/man/man3/System::Command::Reaper.3pm.gz drwxr-xr-x root/root 0 2023-02-10 19:26 ./usr/share/perl5/ drwxr-xr-x root/root 0 2023-02-10 19:26 ./usr/share/perl5/System/ -rw-r--r-- root/root 23724 2023-02-04 21:39 ./usr/share/perl5/System/Command.pm drwxr-xr-x root/root 0 2023-02-10 19:26 ./usr/share/perl5/System/Command/ -rw-r--r-- root/root 6878 2023-02-04 21:39 ./usr/share/perl5/System/Command/Reaper.pm +------------------------------------------------------------------------------+ | Post Build Sun, 28 Jun 2026 23:51:25 +0000 | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup Sun, 28 Jun 2026 23:51:25 +0000 | +------------------------------------------------------------------------------+ Purging /build/libsystem-command-perl-vNQL8D Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary Sun, 28 Jun 2026 23:51:26 +0000 | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 636 Build-Time: 19 Distribution: perl-5.44-throwaway Host Architecture: amd64 Install-Time: 5 Job: /srv/debomatic/incoming/libsystem-command-perl_1.122-1.dsc Machine Architecture: amd64 Package: libsystem-command-perl Package-Time: 27 Source-Version: 1.122-1 Space: 636 Status: successful Version: 1.122-1 -------------------------------------------------------------------------------- Finished at 2026-06-28T23:51:25Z Build needed 00:00:27, 636k disk space