sbuild (Debian sbuild) 0.91.10 (27 June 2026) on carme.larted.org.uk +==============================================================================+ | libperlio-gzip-perl 0.20-1 (amd64) Fri, 24 Jul 2026 00:41:53 +0000 | +==============================================================================+ Package: libperlio-gzip-perl Version: 0.20-1 Source Version: 0.20-1 Distribution: perl-5.44-throwaway Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: Setting up the chroot... I: Creating chroot session... I: Setting up log color... +------------------------------------------------------------------------------+ | Chroot Setup Commands Fri, 24 Jul 2026 00:41:54 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libperlio-gzip-perl_0.20-1 perl-5.44-throwaway amd64 --------------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libperlio-gzip-perl_0.20-1 perl-5.44-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: Setting up apt archive... +------------------------------------------------------------------------------+ | Update chroot Fri, 24 Jul 2026 00:41:54 +0000 | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.44 InRelease [3039 B] Hit:2 http://deb.debian.org/debian unstable InRelease Hit:3 http://deb.debian.org/debian sid InRelease Get:1 file:/srv/reprepro perl-5.44 InRelease [3039 B] Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files Fri, 24 Jul 2026 00:41:55 +0000 | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/libperlio-gzip-perl_0.20-1.dsc exists in /srv/debomatic/incoming; copying to chroot +------------------------------------------------------------------------------+ | Install package build dependencies Fri, 24 Jul 2026 00:41:56 +0000 | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: perl-xs-dev, perl, debhelper-compat (= 13), zlib1g-dev, build-essential Filtered Build-Depends: perl-xs-dev, perl, debhelper-compat (= 13), zlib1g-dev, build-essential dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/build/libperlio-gzip-perl-m5TNjO/resolver-Q2jh1u/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/build/libperlio-gzip-perl-m5TNjO/resolver-Q2jh1u/apt_archive ./ InRelease Get:2 copy:/build/libperlio-gzip-perl-m5TNjO/resolver-Q2jh1u/apt_archive ./ Release [609 B] Ign:3 copy:/build/libperlio-gzip-perl-m5TNjO/resolver-Q2jh1u/apt_archive ./ Release.gpg Get:4 copy:/build/libperlio-gzip-perl-m5TNjO/resolver-Q2jh1u/apt_archive ./ Sources [638 B] Get:5 copy:/build/libperlio-gzip-perl-m5TNjO/resolver-Q2jh1u/apt_archive ./ Packages [670 B] Fetched 1917 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libcrypt-dev libdebhelper-perl libelf1t64 libfile-stripnondeterminism-perl libmagic-mgc libmagic1t64 libperl-dev libpipeline1 libtool libuchardet0 libxml2-16 m4 man-db po-debconf sensible-utils zlib1g-dev Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev gnulib-l10n groff libtool-doc gfortran | fortran95-compiler m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx python3:any libarchive-cpio-perl libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libcrypt-dev libdebhelper-perl libelf1t64 libfile-stripnondeterminism-perl libmagic-mgc libmagic1t64 libperl-dev libpipeline1 libtool libuchardet0 libxml2-16 m4 man-db po-debconf sbuild-build-depends-main-dummy sensible-utils zlib1g-dev 0 upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 12.9 MB/14.1 MB of archives. After this operation, 62.0 MB of additional disk space will be used. Get:1 file:/srv/reprepro perl-5.44/main amd64 libperl-dev amd64 5.44.0~rc2-1 [1169 kB] Get:2 copy:/build/libperlio-gzip-perl-m5TNjO/resolver-Q2jh1u/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [876 B] Get:3 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.26 [27.0 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.47-4 [345 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.47-4 [111 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.47-4 [43.0 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 1.0-3 [332 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-2+b2 [69.0 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.24.1-1 [1336 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.42.2-2 [99.8 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-3 [49.2 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.21-1 [332 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.73-2 [516 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1+nmu1 [60.0 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.18.1-4 [877 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 autopoint all 1.0-3 [820 kB] Get:18 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 14.3 [77.3 kB] Get:19 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-11 [539 kB] Get:20 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 22 [12.2 kB] Get:21 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:22 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.15.1-1 [17.1 kB] Get:23 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.15.1-1 [6020 B] Get:24 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.195-1 [58.1 kB] Get:25 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.17-1 [109 kB] Get:26 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.15.3+dfsg-1 [642 kB] Get:27 http://deb.debian.org/debian unstable/main amd64 gettext amd64 1.0-3 [2658 kB] Get:28 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:29 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.22 [216 kB] Get:30 http://deb.debian.org/debian unstable/main amd64 debhelper all 14.3 [934 kB] Get:31 http://deb.debian.org/debian unstable/main amd64 libcrypt-dev amd64 1:4.5.1-1+b1 [127 kB] Get:32 http://deb.debian.org/debian unstable/main amd64 zlib1g-dev amd64 1:1.3.dfsg+really1.3.2-3 [918 kB] Preconfiguring packages ... Fetched 12.9 MB in 0s (119 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 14599 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.47-4_amd64.deb ... Unpacking libmagic-mgc (1:5.47-4) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.47-4_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.47-4) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.47-4_amd64.deb ... Unpacking file (1:5.47-4) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_1.0-3_amd64.deb ... Unpacking gettext-base (1.0-3) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-2+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-2+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.24.1-1_amd64.deb ... Unpacking groff-base (1.24.1-1) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.42.2-2_amd64.deb ... Unpacking bsdextrautils (2.42.2-2) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-3_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-3) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.21-1_amd64.deb ... Unpacking m4 (1.4.21-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.73-2_all.deb ... Unpacking autoconf (2.73-2) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1+nmu1_all.deb ... Unpacking autotools-dev (20240727.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-4_all.deb ... Unpacking automake (1:1.18.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_1.0-3_all.deb ... Unpacking autopoint (1.0-3) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_14.3_all.deb ... Unpacking libdebhelper-perl (14.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-11_all.deb ... Unpacking libtool (2.5.4-11) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_22_all.deb ... Unpacking dh-autoreconf (22) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.1-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.195-1_amd64.deb ... Unpacking libelf1t64:amd64 (0.195-1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.17-1_amd64.deb ... Unpacking dwz (0.17-1) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../23-libxml2-16_2.15.3+dfsg-1_amd64.deb ... Unpacking libxml2-16:amd64 (2.15.3+dfsg-1) ... Selecting previously unselected package gettext. Preparing to unpack .../24-gettext_1.0-3_amd64.deb ... Unpacking gettext (1.0-3) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../25-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../26-po-debconf_1.0.22_all.deb ... Unpacking po-debconf (1.0.22) ... Selecting previously unselected package debhelper. Preparing to unpack .../27-debhelper_14.3_all.deb ... Unpacking debhelper (14.3) ... Selecting previously unselected package libcrypt-dev:amd64. Preparing to unpack .../28-libcrypt-dev_1%3a4.5.1-1+b1_amd64.deb ... Unpacking libcrypt-dev:amd64 (1:4.5.1-1+b1) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../29-libperl-dev_5.44.0~rc2-1_amd64.deb ... Unpacking libperl-dev:amd64 (5.44.0~rc2-1) ... Selecting previously unselected package zlib1g-dev:amd64. Preparing to unpack .../30-zlib1g-dev_1%3a1.3.dfsg+really1.3.2-3_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.2-3) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../31-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.8-3) ... Setting up bsdextrautils (2.42.2-2) ... Setting up libmagic-mgc (1:5.47-4) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:amd64 (2.15.3+dfsg-1) ... Setting up libdebhelper-perl (14.3) ... Setting up libmagic1t64:amd64 (1:5.47-4) ... Setting up gettext-base (1.0-3) ... Setting up m4 (1.4.21-1) ... Setting up file (1:5.47-4) ... Setting up libelf1t64:amd64 (0.195-1) ... Setting up autotools-dev (20240727.1+nmu1) ... Setting up autopoint (1.0-3) ... Setting up autoconf (2.73-2) ... Setting up zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.2-3) ... Setting up dwz (0.17-1) ... Setting up sensible-utils (0.0.26) ... Setting up libcrypt-dev:amd64 (1:4.5.1-1+b1) ... Setting up libuchardet0:amd64 (0.0.8-2+b2) ... Setting up automake (1:1.18.1-4) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.1-1) ... Setting up gettext (1.0-3) ... Setting up libtool (2.5.4-11) ... Setting up libperl-dev:amd64 (5.44.0~rc2-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (22) ... Setting up dh-strip-nondeterminism (1.15.1-1) ... Setting up groff-base (1.24.1-1) ... Setting up po-debconf (1.0.22) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (14.3) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.42-17) ... +------------------------------------------------------------------------------+ | Check architectures Fri, 24 Jul 2026 00:42:00 +0000 | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in any) +------------------------------------------------------------------------------+ | Build environment Fri, 24 Jul 2026 00:42:00 +0000 | +------------------------------------------------------------------------------+ Kernel: Linux 7.0.10+deb14-amd64 #1 SMP PREEMPT_DYNAMIC Debian 7.0.10-1 (2026-05-27) amd64 (x86_64) Toolchain package versions: binutils_2.46.90.20260712-1 dpkg-dev_1.23.7 g++-15_15.3.0-2 gcc-15_15.3.0-2 libc6-dev_2.42-17 libstdc++-15-dev_15.3.0-2 libstdc++6_16.1.0-3 linux-libc-dev_7.1.4-1 Package versions: apt_3.3.1 autoconf_2.73-2 automake_1:1.18.1-4 autopoint_1.0-3 autotools-dev_20240727.1+nmu1 base-files_14.2 base-passwd_3.6.8 bash_5.3-3 binutils_2.46.90.20260712-1 binutils-common_2.46.90.20260712-1 binutils-x86-64-linux-gnu_2.46.90.20260712-1 bsdextrautils_2.42.2-2 build-essential_12.12 bzip2_1.0.8-6+b2 coreutils_9.10-1 cpp_4:15.2.0-5+b1 cpp-15_15.3.0-2 cpp-15-x86-64-linux-gnu_15.3.0-2 cpp-x86-64-linux-gnu_4:15.2.0-5+b1 dash_0.5.12-12 debconf_1.5.92 debhelper_14.3 debian-archive-keyring_2025.1 debianutils_5.23.2 dh-autoreconf_22 dh-strip-nondeterminism_1.15.1-1 diffutils_1:3.12-1 dirmngr_2.4.9-7 dpkg_1.23.7 dpkg-dev_1.23.7 dwz_0.17-1 eatmydata_131-2 file_1:5.47-4 findutils_4.10.0-4 g++_4:15.2.0-5+b1 g++-15_15.3.0-2 g++-15-x86-64-linux-gnu_15.3.0-2 g++-x86-64-linux-gnu_4:15.2.0-5+b1 gcc_4:15.2.0-5+b1 gcc-15_15.3.0-2 gcc-15-base_15.3.0-2 gcc-15-x86-64-linux-gnu_15.3.0-2 gcc-16-base_16.1.0-3 gcc-x86-64-linux-gnu_4:15.2.0-5+b1 gettext_1.0-3 gettext-base_1.0-3 gnupg_2.4.9-7 gnupg-l10n_2.4.9-7 gpg_2.4.9-7 gpg-agent_2.4.9-7 gpgconf_2.4.9-7 gpgsm_2.4.9-7 grep_3.12-1 groff-base_1.24.1-1 gzip_1.13-1 hostname_3.25 init-system-helpers_1.69 intltool-debian_0.35.0+20060710.6 libacl1_2.4.0-1 libapt-pkg7.0_3.3.1 libarchive-zip-perl_1.68-1 libasan8_16.1.0-3 libassuan9_3.0.2-2+b2 libatomic1_16.1.0-3 libattr1_1:2.6.0-1 libaudit-common_1:4.1.2-1 libaudit1_1:4.1.2-1+b1 libbinutils_2.46.90.20260712-1 libblkid1_2.42.2-2 libbz2-1.0_1.0.8-6+b2 libc-bin_2.42-17 libc-dev-bin_2.42-17 libc-gconv-modules-extra_2.42-17 libc6_2.42-17 libc6-dev_2.42-17 libcap-ng0_0.9.3-1+b1 libcc1-0_16.1.0-3 libcrypt-dev_1:4.5.1-1+b1 libcrypt1_1:4.5.1-1+b1 libctf-nobfd0_2.46.90.20260712-1 libctf0_2.46.90.20260712-1 libdb5.3t64_5.3.28+dfsg2-11+b1 libdebconfclient0_0.283 libdebhelper-perl_14.3 libdpkg-perl_1.23.7 libeatmydata1_131-2+b2 libelf1t64_0.195-1 libffi8_3.7.1-2 libfile-stripnondeterminism-perl_1.15.1-1 libgcc-15-dev_15.3.0-2 libgcc-s1_16.1.0-3 libgcrypt20_1.12.2-1 libgdbm-compat4t64_1.26-1+b2 libgdbm6t64_1.26-1+b2 libgmp10_2:6.3.0+dfsg-5+b2 libgnutls30t64_3.8.13-1 libgomp1_16.1.0-3 libgpg-error0_1.61-3 libgprofng0_2.46.90.20260712-1 libhogweed6t64_3.10.2-1+b1 libhwasan0_16.1.0-3 libidn2-0_2.3.8-5 libisl23_0.28-1 libitm1_16.1.0-3 libjansson4_2.15.1-1 libksba8_1.8.0-3 libldap2_2.6.13+dfsg-1+b1 liblsan0_16.1.0-3 liblz4-1_1.10.0-10 liblzma5_5.8.3-1 libmagic-mgc_1:5.47-4 libmagic1t64_1:5.47-4 libmd0_1.2.0-2 libmount1_2.42.2-2 libmpc3_1.3.1-3 libmpfr6_4.2.2-3 libncursesw6_6.6+20260608-2 libnettle8t64_3.10.2-1+b1 libnpth0t64_1.8-3+b2 libp11-kit0_0.26.4-1 libpam-modules_1.7.0-8 libpam-modules-bin_1.7.0-8 libpam-runtime_1.7.0-8 libpam0g_1.7.0-8 libpcre2-8-0_10.46-1+b2 libperl-dev_5.44.0~rc2-1 libperl5.40_5.40.1-8 libperl5.44_5.44.0~rc2-1 libpipeline1_1.5.8-3 libquadmath0_16.1.0-3 libreadline8t64_8.3-4 libsasl2-2_2.1.28+dfsg1-11 libsasl2-modules-db_2.1.28+dfsg1-11 libseccomp2_2.6.1-1 libselinux1_3.11-2 libsframe3_2.46.90.20260712-1 libsmartcols1_2.42.2-2 libsqlite3-0_3.53.3-1 libssl3t64_3.6.3-1 libstdc++-15-dev_15.3.0-2 libstdc++6_16.1.0-3 libsystemd0_261.2-1 libtasn1-6_4.21.0-2+b1 libtinfo6_6.6+20260608-2 libtool_2.5.4-11 libtsan2_16.1.0-3 libtss2-mu-4.0.1-0t64_4.1.3-7 libtss2-rc0t64_4.1.3-7 libtss2-sys1t64_4.1.3-7 libtss2-tcti-device0t64_4.1.3-7 libtss2-tcti-mssim0t64_4.1.3-7 libtss2-tcti-swtpm0t64_4.1.3-7 libubsan1_16.1.0-3 libuchardet0_0.0.8-2+b2 libudev1_261.2-1 libunistring5_1.4.2-1 libuuid1_2.42.2-2 libxml2-16_2.15.3+dfsg-1 libxxhash0_0.8.3-2+b2 libzstd1_1.5.7+dfsg-3+b2 linux-libc-dev_7.1.4-1 m4_1.4.21-1 make_4.4.1-3 man-db_2.13.1-1 mawk_1.3.4.20260302-1 mount_2.42.2-2 ncurses-base_6.6+20260608-2 ncurses-bin_6.6+20260608-2 openssl-provider-legacy_3.6.3-1 patch_2.8-2 perl_5.44.0~rc2-1 perl-base_5.44.0~rc2-1 perl-modules-5.40_5.40.1-8 perl-modules-5.44_5.44.0~rc2-1 pinentry-curses_1.3.3-2 po-debconf_1.0.22 readline-common_8.3-4 rpcsvc-proto_1.4.4-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-3 sensible-utils_0.0.26 sqv_1.4.0-1 sysvinit-utils_3.18-1 tar_1.35+dfsg-4 util-linux_2.42.2-2 xz-utils_5.8.3-1 zlib1g_1:1.3.dfsg+really1.3.2-3 zlib1g-dev_1:1.3.dfsg+really1.3.2-3 +------------------------------------------------------------------------------+ | Build Fri, 24 Jul 2026 00:42:00 +0000 | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libperlio-gzip-perl Binary: libperlio-gzip-perl Architecture: any Version: 0.20-1 Maintainer: Debian Perl Group Homepage: https://metacpan.org/release/PerlIO-gzip Standards-Version: 3.9.6 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libperlio-gzip-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libperlio-gzip-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: perl-xs-dev, perl:native, debhelper-compat (= 13), zlib1g-dev Package-List: libperlio-gzip-perl deb perl optional arch=any Checksums-Sha1: a1627a023babe66a1e9994d04e08ce76b42ab2ee 19076 libperlio-gzip-perl_0.20.orig.tar.gz a4a9ded3ad43f8189113f07f632ed5e30b49b130 2404 libperlio-gzip-perl_0.20-1.debian.tar.xz Checksums-Sha256: 4848679a3f201e3f3b0c5f6f9526e602af52923ffa471a2a3657db786bd3bdc5 19076 libperlio-gzip-perl_0.20.orig.tar.gz 9008f496338b36f36cf2f79c5b79e6a0287334e4bc3fb69a1feb92dfbc3fa70e 2404 libperlio-gzip-perl_0.20-1.debian.tar.xz Files: 0393eae5d0b23df6cf40ed44af7d711c 19076 libperlio-gzip-perl_0.20.orig.tar.gz f2060c75903f20298493d7353d4e2d17 2404 libperlio-gzip-perl_0.20-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKrtl4ACgkQV5wWDUye I+gaRQ/8DNm8W7A+lkMh0LvbY8DePT0mFue3PQvuSnMa2TP7Ij5uxL/2qAkvJ9vu gjGaRybcZ/ld2XSG1BZdcee7NqLV15F1dh4NFKpV1tJxsR8wfPloApcdUg87aXu3 qR1uYWZS5CY5bbxxjlkDcsXPjq8RUdnjRyi+wzKVbYigE3CsCNMxNDHStkR5hhVB 5SaszZdJkrcJ6c2IiNHYG/6i26DhmkIwP4ITy1muJkVj0ewnCF4a0LDlDgh/oIlj a+DYDONEvK2GU5r2acfEduruNo6FiX+mfZwnKHjiLt642y50+JrRa6Eo74LNkU+r dj/v9r7oHsitgzKShVtIuE8eMAONNmU/k0OdrcZ0ntZfYZUBcqaaDr+1Ttf49pZi CWmQkTuALe6PJeSAhchCeqiXEiC8QFovY3LAutW5Zd5ac8oLLMpDNcrHrqKJcHM0 H9TJApDtQcAcHgdH+leQOgWVfHhMdTs+5lpxjkdQdEn5jtXTef73u/2RN0G8Npq3 AXloqvYlMdCDYzCxh97IDTz+y+0Hcwhgm/TDATQlp8dR7REKjLFizYASd4XKlBTc 2Gbd3gBQdbUN11z3+rgJ+bUPTu7adnw1LLUYxUNDXARDHtO4FIcxjr6lZh311kWA 9GL8Z/aSLjvOv6x4T1eoEsfPB0vUiPk4iTl2ImW6r18MPFoz45o= =bcrU -----END PGP SIGNATURE----- dpkg-source: warning: cannot verify inline signature for ./libperlio-gzip-perl_0.20-1.dsc: missing OpenPGP keyrings dpkg-source: info: verifying ./libperlio-gzip-perl_0.20-1.dsc dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-keyring.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-tag2upload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-nonupload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-maintainers.pgp dpkg-source: info: extracting libperlio-gzip-perl in /build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20 dpkg-source: info: unpacking libperlio-gzip-perl_0.20.orig.tar.gz dpkg-source: info: unpacking libperlio-gzip-perl_0.20-1.debian.tar.xz clean up apt cache ------------------ Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Time Build Commands Fri, 24 Jul 2026 00:42:01 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libperlio-gzip-perl_0.20-1 perl-5.44-throwaway amd64 --------------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libperlio-gzip-perl_0.20-1 perl-5.44-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20 SCHROOT_ALIAS_NAME=perl-5.44-throwaway-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.44-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.44-amd64-debomatic-b77c2e4f-e07b-468b-8bc8-4874b934586a SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -Zxz dpkg-buildpackage: info: source package libperlio-gzip-perl dpkg-buildpackage: info: source version 0.20-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean dpkg-source -Zxz -b . dpkg-source: info: using source format '3.0 (quilt)' dpkg-source: info: building libperlio-gzip-perl using existing ../libperlio-gzip-perl_0.20.orig.tar.gz dpkg-source: info: building libperlio-gzip-perl in ../libperlio-gzip-perl_0.20-1.debian.tar.xz dpkg-source: info: building libperlio-gzip-perl in ../libperlio-gzip-perl_0.20-1.dsc debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" LD="x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PerlIO::gzip Writing MYMETA.yml and MYMETA.json dh_auto_build make -j2 make[1]: Entering directory '/build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20' Running Mkbootstrap for gzip () chmod 644 "gzip.bs" "/usr/bin/perl" "/usr/share/perl/5.44/ExtUtils/xsubpp" -noprototypes -typemap '/usr/share/perl/5.44/ExtUtils/typemap' gzip.xs > gzip.xsc cp gzip.pm blib/lib/PerlIO/gzip.pm "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 mv gzip.xsc gzip.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.44/CORE" gzip.c rm -f blib/arch/auto/PerlIO/gzip/gzip.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ -lz \ chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so Manifying 1 pod document make[1]: Leaving directory '/build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20' dh_auto_test make -j2 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. Warning: unable to close filehandle FOO properly. t/read.t ... 1..301 ok 1 - Does it even load? ok 2 - open ok3.gz with <:gzip ok 3 ok 4 - should be end of file ok 5 - close it again ok 6 - open ok3.gz with <:gzip() ok 7 ok 8 - should be end of file ok 9 - close it again ok 10 - open ok3.gz with <:gzip(gzip) ok 11 ok 12 - should be end of file ok 13 - close it again ok 14 - open ok3.gz with <:gzip(lazy) ok 15 ok 16 - should be end of file ok 17 - close it again ok 18 - open ok3.gz with <:gzip(gzip,lazy) ok 19 ok 20 - should be end of file ok 21 - close it again ok 22 - README should open ok 23 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 24 - open ok17.gz with <:gzip ok 25 ok 26 - should be end of file ok 27 - close it ok 28 - open ok19 with <:gzip(none) ok 29 ok 30 - open ok21 with < ok 31 ok 32 - Ho ho ho. Switch to gunzip mid stream. ok 33 ok 34 - open ok19 with <:gzip(auto) ok 35 ok 36 - should be end of file ok 37 - close it ok 38 - open ok3.gz with <:gzip(auto) ok 39 ok 40 - should be end of file ok 41 - close it ok 42 - open ok19 with <:gzip(lazy,auto) ok 43 ok 44 - should be end of file ok 45 - close it ok 46 - open ok3.gz with <:gzip(auto,lazy) ok 47 ok 48 - should be end of file ok 49 - close it ok 50 - README should open in lazy mode ok 51 - but should fail on first read ok 52 - README should open in auto mode ok 53 - but should fail on first read ok 54 - README should open in auto,lazy mode ok 55 - but should fail on first read # Attempting to run 'gzip -c --fast /usr/bin/perl >perl.gz' ok 56 - open perl.gz ok 57 - compare with original /usr/bin/perl ok 58 - should be end of file ok 59 - close perl.gz ok 60 - open README with <:gzip(autopop) ok 61 - read first line ok 62 - check second line ok 63 - open ok3.gz with <:gzip(autopop) ok 64 ok 65 - open ok50.gz.short with <:gzip ok 66 ok 67 - should be end of file ok 68 - close should fail ok 69 - open ok54.gz.len with <:gzip ok 70 ok 71 - should be end of file ok 72 - close should fail ok 73 - open ok58.gz.crc with <:gzip ok 74 ok 75 - should be end of file ok 76 - close should fail ok 77 - open ok3.gz with <:unix:gzip ok 78 ok 79 - should be end of file ok 80 - close it again ok 81 - open ok3.gz with <:unix:gzip() ok 82 ok 83 - should be end of file ok 84 - close it again ok 85 - open ok3.gz with <:unix:gzip(gzip) ok 86 ok 87 - should be end of file ok 88 - close it again ok 89 - open ok3.gz with <:unix:gzip(lazy) ok 90 ok 91 - should be end of file ok 92 - close it again ok 93 - open ok3.gz with <:unix:gzip(gzip,lazy) ok 94 ok 95 - should be end of file ok 96 - close it again ok 97 - README should open ok 98 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 99 - open ok17.gz with <:unix:gzip ok 100 ok 101 - should be end of file ok 102 - close it ok 103 - open ok19 with <:unix:gzip(none) ok 104 ok 105 - open ok21 with <:unix ok 106 ok 107 - Ho ho ho. Switch to gunzip mid stream. ok 108 ok 109 - open ok19 with <:unix:gzip(auto) ok 110 ok 111 - should be end of file ok 112 - close it ok 113 - open ok3.gz with <:unix:gzip(auto) ok 114 ok 115 - should be end of file ok 116 - close it ok 117 - open ok19 with <:unix:gzip(lazy,auto) ok 118 ok 119 - should be end of file ok 120 - close it ok 121 - open ok3.gz with <:unix:gzip(auto,lazy) ok 122 ok 123 - should be end of file ok 124 - close it ok 125 - README should open in lazy mode ok 126 - but should fail on first read ok 127 - README should open in auto mode ok 128 - but should fail on first read ok 129 - README should open in auto,lazy mode ok 130 - but should fail on first read ok 131 - open perl.gz ok 132 - compare with original /usr/bin/perl ok 133 - should be end of file ok 134 - close perl.gz ok 135 - open README with <:unix:gzip(autopop) ok 136 - read first line ok 137 - check second line ok 138 - open ok3.gz with <:unix:gzip(autopop) ok 139 ok 140 - open ok50.gz.short with <:unix:gzip ok 141 ok 142 - should be end of file ok 143 - close should fail ok 144 - open ok54.gz.len with <:unix:gzip ok 145 ok 146 - should be end of file ok 147 - close should fail ok 148 - open ok58.gz.crc with <:unix:gzip ok 149 ok 150 - should be end of file ok 151 - close should fail ok 152 - open ok3.gz with <:stdio:gzip ok 153 ok 154 - should be end of file ok 155 - close it again ok 156 - open ok3.gz with <:stdio:gzip() ok 157 ok 158 - should be end of file ok 159 - close it again ok 160 - open ok3.gz with <:stdio:gzip(gzip) ok 161 ok 162 - should be end of file ok 163 - close it again ok 164 - open ok3.gz with <:stdio:gzip(lazy) ok 165 ok 166 - should be end of file ok 167 - close it again ok 168 - open ok3.gz with <:stdio:gzip(gzip,lazy) ok 169 ok 170 - should be end of file ok 171 - close it again ok 172 - README should open ok 173 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 174 - open ok17.gz with <:stdio:gzip ok 175 ok 176 - should be end of file ok 177 - close it ok 178 - open ok19 with <:stdio:gzip(none) ok 179 ok 180 - open ok21 with <:stdio ok 181 ok 182 - Ho ho ho. Switch to gunzip mid stream. ok 183 ok 184 - open ok19 with <:stdio:gzip(auto) ok 185 ok 186 - should be end of file ok 187 - close it ok 188 - open ok3.gz with <:stdio:gzip(auto) ok 189 ok 190 - should be end of file ok 191 - close it ok 192 - open ok19 with <:stdio:gzip(lazy,auto) ok 193 ok 194 - should be end of file ok 195 - close it ok 196 - open ok3.gz with <:stdio:gzip(auto,lazy) ok 197 ok 198 - should be end of file ok 199 - close it ok 200 - README should open in lazy mode ok 201 - but should fail on first read ok 202 - README should open in auto mode ok 203 - but should fail on first read ok 204 - README should open in auto,lazy mode ok 205 - but should fail on first read ok 206 - open perl.gz ok 207 - compare with original /usr/bin/perl ok 208 - should be end of file ok 209 - close perl.gz ok 210 - open README with <:stdio:gzip(autopop) ok 211 - read first line ok 212 - check second line ok 213 - open ok3.gz with <:stdio:gzip(autopop) ok 214 ok 215 - open ok50.gz.short with <:stdio:gzip ok 216 ok 217 - should be end of file ok 218 - close should fail ok 219 - open ok54.gz.len with <:stdio:gzip ok 220 ok 221 - should be end of file ok 222 - close should fail ok 223 - open ok58.gz.crc with <:stdio:gzip ok 224 ok 225 - should be end of file ok 226 - close should fail ok 227 - open ok3.gz with <:perlio:gzip ok 228 ok 229 - should be end of file ok 230 - close it again ok 231 - open ok3.gz with <:perlio:gzip() ok 232 ok 233 - should be end of file ok 234 - close it again ok 235 - open ok3.gz with <:perlio:gzip(gzip) ok 236 ok 237 - should be end of file ok 238 - close it again ok 239 - open ok3.gz with <:perlio:gzip(lazy) ok 240 ok 241 - should be end of file ok 242 - close it again ok 243 - open ok3.gz with <:perlio:gzip(gzip,lazy) ok 244 ok 245 - should be end of file ok 246 - close it again ok 247 - README should open ok 248 - README should not open [core perlio bug fixed post 5.7.2 12827] ok 249 - open ok17.gz with <:perlio:gzip ok 250 ok 251 - should be end of file ok 252 - close it ok 253 - open ok19 with <:perlio:gzip(none) ok 254 ok 255 - open ok21 with <:perlio ok 256 ok 257 - Ho ho ho. Switch to gunzip mid stream. ok 258 ok 259 - open ok19 with <:perlio:gzip(auto) ok 260 ok 261 - should be end of file ok 262 - close it ok 263 - open ok3.gz with <:perlio:gzip(auto) ok 264 ok 265 - should be end of file ok 266 - close it ok 267 - open ok19 with <:perlio:gzip(lazy,auto) ok 268 ok 269 - should be end of file ok 270 - close it ok 271 - open ok3.gz with <:perlio:gzip(auto,lazy) ok 272 ok 273 - should be end of file ok 274 - close it ok 275 - README should open in lazy mode ok 276 - but should fail on first read ok 277 - README should open in auto mode ok 278 - but should fail on first read ok 279 - README should open in auto,lazy mode ok 280 - but should fail on first read ok 281 - open perl.gz ok 282 - compare with original /usr/bin/perl ok 283 - should be end of file ok 284 - close perl.gz ok 285 - open README with <:perlio:gzip(autopop) ok 286 - read first line ok 287 - check second line ok 288 - open ok3.gz with <:perlio:gzip(autopop) ok 289 ok 290 - open ok50.gz.short with <:perlio:gzip ok 291 ok 292 - should be end of file ok 293 - close should fail ok 294 - open ok54.gz.len with <:perlio:gzip ok 295 ok 296 - should be end of file ok 297 - close should fail ok 298 - open ok58.gz.crc with <:perlio:gzip ok 299 ok 300 - should be end of file ok 301 - close should fail ok t/write.t .. 1..260 ok 1 - open foo as >:gzip ok 2 - close it straight away ok 3 - empty gzip file should be 20 bytes ok 4 - open foo as >:gzip ok 5 - print to it ok 6 - close it ok 7 - open foo for reading ok 8 - check we get same thing back ok 9 - should be end of file ok 10 - close it ok 11 - open foo as >:gzip(autopop) ok 12 - print to it ok 13 - close it ok 14 - open foo for reading [just '<'] ok 15 - check we get same thing back ok 16 - should be end of file ok 17 - close it ok 18 - open >:gzip [about to write 129736 bytes] ok 19 - print contents of /bin/sh ok 20 - close it ok 21 - open <:gzip ok 22 - compare compressed copy with '/bin/sh' ok 23 - should be end of file ok 24 - close it ok 25 - open empty as >:gzip(lazy) ok 26 - close it ok 27 - check it is zero length ok 28 - open foo as >:gzip(lazy) ok 29 - print to it ok 30 - print to it with $\ set ok 31 - close it ok 32 - open foo for reading ok 33 - check we get message back ok 34 - check we get message2 back ok 35 - should be end of file ok 36 - close it ok 37 - open foo as >:gzip(none) ok 38 - print to it ok 39 - close it ok 40 - no header, so open <:gzip should fail ok 41 - open foo for reading ok 42 - check we get same thing back ok 43 - should be end of file ok 44 - close it ok 45 - open +<:gzip should fail, as read/write unsupported ok 46 - check file empty was not created ok 47 - open +>:gzip should fail, as read/write unsupported not ok 48 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 49 - open +< ok 50 - binmode ':gzip' should fail on read/write ok 51 - close it ok 52 - open +> ok 53 - binmode ':gzip' should fail on read/write ok 54 - close it ok 55 - open foo as > ok 56 - print to it ok 57 - binmode ':gzip(none)' ok 58 - print to it ok 59 - close it ok 60 - open foo as < ok 61 - check we get uncompressed message ok 62 - binmode ':gzip(none)' ok 63 - check we get compressed message ok 64 - should be end of file ok 65 - close it ok 66 - open foo as >:unix:gzip ok 67 - close it straight away ok 68 - empty gzip file should be 20 bytes ok 69 - open foo as >:unix:gzip ok 70 - print to it ok 71 - close it ok 72 - open foo for reading ok 73 - check we get same thing back ok 74 - should be end of file ok 75 - close it ok 76 - open foo as >:unix:gzip(autopop) ok 77 - print to it ok 78 - close it ok 79 - open foo for reading [just '<'] ok 80 - check we get same thing back ok 81 - should be end of file ok 82 - close it ok 83 - open >:unix:gzip [about to write 129736 bytes] ok 84 - print contents of /bin/sh ok 85 - close it ok 86 - open <:unix:gzip ok 87 - compare compressed copy with '/bin/sh' ok 88 - should be end of file ok 89 - close it ok 90 - open empty as >:unix:gzip(lazy) ok 91 - close it ok 92 - check it is zero length ok 93 - open foo as >:unix:gzip(lazy) ok 94 - print to it ok 95 - print to it with $\ set ok 96 - close it ok 97 - open foo for reading ok 98 - check we get message back ok 99 - check we get message2 back ok 100 - should be end of file ok 101 - close it ok 102 - open foo as >:unix:gzip(none) ok 103 - print to it ok 104 - close it ok 105 - no header, so open <:unix:gzip should fail ok 106 - open foo for reading ok 107 - check we get same thing back ok 108 - should be end of file ok 109 - close it ok 110 - open +<:unix:gzip should fail, as read/write unsupported ok 111 - check file empty was not created ok 112 - open +>:unix:gzip should fail, as read/write unsupported not ok 113 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 114 - open +<:unix ok 115 - binmode ':gzip' should fail on read/write ok 116 - close it ok 117 - open +>:unix ok 118 - binmode ':gzip' should fail on read/write ok 119 - close it ok 120 - open foo as >:unix ok 121 - print to it ok 122 - binmode ':gzip(none)' ok 123 - print to it ok 124 - close it ok 125 - open foo as <:unix ok 126 - check we get uncompressed message ok 127 - binmode ':gzip(none)' ok 128 - check we get compressed message ok 129 - should be end of file ok 130 - close it ok 131 - open foo as >:stdio:gzip ok 132 - close it straight away ok 133 - empty gzip file should be 20 bytes ok 134 - open foo as >:stdio:gzip ok 135 - print to it ok 136 - close it ok 137 - open foo for reading ok 138 - check we get same thing back ok 139 - should be end of file ok 140 - close it ok 141 - open foo as >:stdio:gzip(autopop) ok 142 - print to it ok 143 - close it ok 144 - open foo for reading [just '<'] ok 145 - check we get same thing back ok 146 - should be end of file ok 147 - close it ok 148 - open >:stdio:gzip [about to write 129736 bytes] ok 149 - print contents of /bin/sh ok 150 - close it ok 151 - open <:stdio:gzip ok 152 - compare compressed copy with '/bin/sh' ok 153 - should be end of file ok 154 - close it ok 155 - open empty as >:stdio:gzip(lazy) ok 156 - close it ok 157 - check it is zero length ok 158 - open foo as >:stdio:gzip(lazy) ok 159 - print to it ok 160 - print to it with $\ set ok 161 - close it ok 162 - open foo for reading ok 163 - check we get message back ok 164 - check we get message2 back ok 165 - should be end of file ok 166 - close it ok 167 - open foo as >:stdio:gzip(none) ok 168 - print to it ok 169 - close it ok 170 - no header, so open <:stdio:gzip should fail ok 171 - open foo for reading ok 172 - check we get same thing back ok 173 - should be end of file ok 174 - close it ok 175 - open +<:stdio:gzip should fail, as read/write unsupported ok 176 - check file empty was not created ok 177 - open +>:stdio:gzip should fail, as read/write unsupported not ok 178 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 179 - open +<:stdio ok 180 - binmode ':gzip' should fail on read/write ok 181 - close it ok 182 - open +>:stdio ok 183 - binmode ':gzip' should fail on read/write ok 184 - close it ok 185 - open foo as >:stdio ok 186 - print to it ok 187 - binmode ':gzip(none)' ok 188 - print to it ok 189 - close it ok 190 - open foo as <:stdio ok 191 - check we get uncompressed message ok 192 - binmode ':gzip(none)' ok 193 - check we get compressed message ok 194 - should be end of file ok 195 - close it ok 196 - open foo as >:perlio:gzip ok 197 - close it straight away ok 198 - empty gzip file should be 20 bytes ok 199 - open foo as >:perlio:gzip ok 200 - print to it ok 201 - close it ok 202 - open foo for reading ok 203 - check we get same thing back ok 204 - should be end of file ok 205 - close it ok 206 - open foo as >:perlio:gzip(autopop) ok 207 - print to it ok 208 - close it ok 209 - open foo for reading [just '<'] ok 210 - check we get same thing back ok 211 - should be end of file ok 212 - close it ok 213 - open >:perlio:gzip [about to write 129736 bytes] ok 214 - print contents of /bin/sh ok 215 - close it ok 216 - open <:perlio:gzip ok 217 - compare compressed copy with '/bin/sh' ok 218 - should be end of file ok 219 - close it ok 220 - open empty as >:perlio:gzip(lazy) ok 221 - close it ok 222 - check it is zero length ok 223 - open foo as >:perlio:gzip(lazy) ok 224 - print to it ok 225 - print to it with $\ set ok 226 - close it ok 227 - open foo for reading ok 228 - check we get message back ok 229 - check we get message2 back ok 230 - should be end of file ok 231 - close it ok 232 - open foo as >:perlio:gzip(none) ok 233 - print to it ok 234 - close it ok 235 - no header, so open <:perlio:gzip should fail ok 236 - open foo for reading ok 237 - check we get same thing back ok 238 - should be end of file ok 239 - close it ok 240 - open +<:perlio:gzip should fail, as read/write unsupported ok 241 - check file empty was not created ok 242 - open +>:perlio:gzip should fail, as read/write unsupported not ok 243 - check file empty was not created # TODO read/write open still creates file # Failed (TODO) test 'check file empty was not created' # at t/write.t line 146. # # file empty has size 0 ok 244 - open +<:perlio ok 245 - binmode ':gzip' should fail on read/write ok 246 - close it ok 247 - open +>:perlio ok 248 - binmode ':gzip' should fail on read/write ok 249 - close it ok 250 - open foo as >:perlio ok 251 - print to it ok 252 - binmode ':gzip(none)' ok 253 - print to it ok 254 - close it ok 255 - open foo as <:perlio ok 256 - check we get uncompressed message ok 257 - binmode ':gzip(none)' ok 258 - check we get compressed message ok 259 - should be end of file ok 260 - close it ok All tests successful. Files=2, Tests=561, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.26 cusr 0.06 csys = 0.36 CPU) Result: PASS make[1]: Leaving directory '/build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libperlio-gzip-perl/ make -j2 install DESTDIR=/build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl/usr/lib/x86_64-linux-gnu/perl5/5.44/auto/PerlIO/gzip/gzip.so Installing /build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl/usr/lib/x86_64-linux-gnu/perl5/5.44/PerlIO/gzip.pm Installing /build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20/debian/libperlio-gzip-perl/usr/share/man/man3/PerlIO::gzip.3pm make[1]: Leaving directory '/build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 from: /lib64/ld-linux-x86-64.so.2 dpkg-shlibdeps: warning: diversions involved - output may be incorrect diversion by libc6 to: /lib64/ld-linux-x86-64.so.2.usr-is-merged dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libperlio-gzip-perl-dbgsym' in '../libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb'. dpkg-deb: building package 'libperlio-gzip-perl' in '../libperlio-gzip-perl_0.20-1_amd64.deb'. dpkg-genbuildinfo -O../libperlio-gzip-perl_0.20-1_amd64.buildinfo dpkg-genchanges -O../libperlio-gzip-perl_0.20-1_amd64.changes dpkg-genchanges: info: including full source code in upload dpkg-source -Zxz --after-build . dpkg-buildpackage: info: full upload (original source is included) -------------------------------------------------------------------------------- Build finished at 2026-07-24T00:42:05Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes Fri, 24 Jul 2026 00:42:05 +0000 | +------------------------------------------------------------------------------+ libperlio-gzip-perl_0.20-1_amd64.changes: ----------------------------------------- Format: 1.8 Date: Fri, 17 Jun 2022 00:01:30 +0100 Source: libperlio-gzip-perl Binary: libperlio-gzip-perl libperlio-gzip-perl-dbgsym Architecture: source amd64 Version: 0.20-1 Distribution: perl-5.44-throwaway Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libperlio-gzip-perl - module providing a PerlIO layer to gzip/gunzip Changes: libperlio-gzip-perl (0.20-1) unstable; urgency=medium . [ Florian Schlichting ] IGNORE-VERSION: 0.20-1 no relevant code changes . [ Salvatore Bonaccorso ] * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. * Remove Jonathan Yu from Uploaders. Thanks for your work! . [ Florian Schlichting ] * Import upstream version 0.20 * Add upstream metadata . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ Debian Janitor ] * Bump debhelper from old 9 to 12. * Set debhelper-compat version in Build-Depends. * Remove obsolete fields Contact, Name from debian/upstream/metadata (already present in machine-readable debian/copyright). . [ gregor herrmann ] * debian/control: update Build-Depends for cross builds. * debian/watch: use uscan version 4. Checksums-Sha1: cf63c43f68b43feec298ad6215e1c6747571ddcb 1196 libperlio-gzip-perl_0.20-1.dsc a1627a023babe66a1e9994d04e08ce76b42ab2ee 19076 libperlio-gzip-perl_0.20.orig.tar.gz fb3e2865513d5462512fe29617da9a6b7893eedc 2412 libperlio-gzip-perl_0.20-1.debian.tar.xz 6c2925fd21060aa69fd9e6389afa2410b46d0344 35388 libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb caed76043b54807a73474e5fb4f284c125f504ec 5416 libperlio-gzip-perl_0.20-1_amd64.buildinfo 4878c2ddc9e91261ad31507f26dc044230c6f2bf 17268 libperlio-gzip-perl_0.20-1_amd64.deb Checksums-Sha256: be93ede86c796efc8371cc56896b8172cfc13cd2610a04180fa3718458e457c7 1196 libperlio-gzip-perl_0.20-1.dsc 4848679a3f201e3f3b0c5f6f9526e602af52923ffa471a2a3657db786bd3bdc5 19076 libperlio-gzip-perl_0.20.orig.tar.gz 75aa04becc449a4f663726630288dfcb4fbd94ce665528877300a86df9b2ccfe 2412 libperlio-gzip-perl_0.20-1.debian.tar.xz 0b157c56a5f6e9a6a1aed7c5cc6c08b5ce9fd07517fc8eef297ede199b7aaa3d 35388 libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb 8e3f31afaf80846b28155d6d50f85f1074dab665daaec34a45b8b88bd247d332 5416 libperlio-gzip-perl_0.20-1_amd64.buildinfo df39da2c7dd200abada3083f606a9ff004c263b04e531fc0ac1b7a0c4f18ce4b 17268 libperlio-gzip-perl_0.20-1_amd64.deb Files: d76faf254418cd5bca8abe46c6301d3f 1196 perl optional libperlio-gzip-perl_0.20-1.dsc 0393eae5d0b23df6cf40ed44af7d711c 19076 perl optional libperlio-gzip-perl_0.20.orig.tar.gz 943d50bea6eef3b610fdeb8bbad05fa0 2412 perl optional libperlio-gzip-perl_0.20-1.debian.tar.xz 88177050e61845e924a8bb964694f85d 35388 debug optional libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb 2d6aeb013c6fe49576eb3ef678974106 5416 perl optional libperlio-gzip-perl_0.20-1_amd64.buildinfo c838adad575141ca34667ff0fb714203 17268 perl optional libperlio-gzip-perl_0.20-1_amd64.deb +------------------------------------------------------------------------------+ | Buildinfo Fri, 24 Jul 2026 00:42:05 +0000 | +------------------------------------------------------------------------------+ Format: 1.0 Source: libperlio-gzip-perl Binary: libperlio-gzip-perl libperlio-gzip-perl-dbgsym Architecture: amd64 source Version: 0.20-1 Checksums-Md5: d76faf254418cd5bca8abe46c6301d3f 1196 libperlio-gzip-perl_0.20-1.dsc 88177050e61845e924a8bb964694f85d 35388 libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb c838adad575141ca34667ff0fb714203 17268 libperlio-gzip-perl_0.20-1_amd64.deb Checksums-Sha1: cf63c43f68b43feec298ad6215e1c6747571ddcb 1196 libperlio-gzip-perl_0.20-1.dsc 6c2925fd21060aa69fd9e6389afa2410b46d0344 35388 libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb 4878c2ddc9e91261ad31507f26dc044230c6f2bf 17268 libperlio-gzip-perl_0.20-1_amd64.deb Checksums-Sha256: be93ede86c796efc8371cc56896b8172cfc13cd2610a04180fa3718458e457c7 1196 libperlio-gzip-perl_0.20-1.dsc 0b157c56a5f6e9a6a1aed7c5cc6c08b5ce9fd07517fc8eef297ede199b7aaa3d 35388 libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb df39da2c7dd200abada3083f606a9ff004c263b04e531fc0ac1b7a0c4f18ce4b 17268 libperlio-gzip-perl_0.20-1_amd64.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Fri, 24 Jul 2026 00:42:04 +0000 Build-Path: /build/libperlio-gzip-perl-m5TNjO/libperlio-gzip-perl-0.20 Build-Tainted-By: usr-local-has-programs Installed-Build-Depends: autoconf (= 2.73-2), automake (= 1:1.18.1-4), autopoint (= 1.0-3), autotools-dev (= 20240727.1+nmu1), base-files (= 14.2), base-passwd (= 3.6.8), bash (= 5.3-3), binutils (= 2.46.90.20260712-1), binutils-common (= 2.46.90.20260712-1), binutils-x86-64-linux-gnu (= 2.46.90.20260712-1), bsdextrautils (= 2.42.2-2), build-essential (= 12.12), bzip2 (= 1.0.8-6+b2), coreutils (= 9.10-1), cpp (= 4:15.2.0-5+b1), cpp-15 (= 15.3.0-2), cpp-15-x86-64-linux-gnu (= 15.3.0-2), cpp-x86-64-linux-gnu (= 4:15.2.0-5+b1), dash (= 0.5.12-12), debconf (= 1.5.92), debhelper (= 14.3), debianutils (= 5.23.2), dh-autoreconf (= 22), dh-strip-nondeterminism (= 1.15.1-1), diffutils (= 1:3.12-1), dpkg (= 1.23.7), dpkg-dev (= 1.23.7), dwz (= 0.17-1), file (= 1:5.47-4), findutils (= 4.10.0-4), g++ (= 4:15.2.0-5+b1), g++-15 (= 15.3.0-2), g++-15-x86-64-linux-gnu (= 15.3.0-2), g++-x86-64-linux-gnu (= 4:15.2.0-5+b1), gcc (= 4:15.2.0-5+b1), gcc-15 (= 15.3.0-2), gcc-15-base (= 15.3.0-2), gcc-15-x86-64-linux-gnu (= 15.3.0-2), gcc-16-base (= 16.1.0-3), gcc-x86-64-linux-gnu (= 4:15.2.0-5+b1), gettext (= 1.0-3), gettext-base (= 1.0-3), grep (= 3.12-1), groff-base (= 1.24.1-1), gzip (= 1.13-1), hostname (= 3.25), init-system-helpers (= 1.69), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.4.0-1), libarchive-zip-perl (= 1.68-1), libasan8 (= 16.1.0-3), libatomic1 (= 16.1.0-3), libattr1 (= 1:2.6.0-1), libaudit-common (= 1:4.1.2-1), libaudit1 (= 1:4.1.2-1+b1), libbinutils (= 2.46.90.20260712-1), libblkid1 (= 2.42.2-2), libbz2-1.0 (= 1.0.8-6+b2), libc-bin (= 2.42-17), libc-dev-bin (= 2.42-17), libc-gconv-modules-extra (= 2.42-17), libc6 (= 2.42-17), libc6-dev (= 2.42-17), libcap-ng0 (= 0.9.3-1+b1), libcc1-0 (= 16.1.0-3), libcrypt-dev (= 1:4.5.1-1+b1), libcrypt1 (= 1:4.5.1-1+b1), libctf-nobfd0 (= 2.46.90.20260712-1), libctf0 (= 2.46.90.20260712-1), libdb5.3t64 (= 5.3.28+dfsg2-11+b1), libdebconfclient0 (= 0.283), libdebhelper-perl (= 14.3), libdpkg-perl (= 1.23.7), libelf1t64 (= 0.195-1), libfile-stripnondeterminism-perl (= 1.15.1-1), libgcc-15-dev (= 15.3.0-2), libgcc-s1 (= 16.1.0-3), libgdbm-compat4t64 (= 1.26-1+b2), libgdbm6t64 (= 1.26-1+b2), libgmp10 (= 2:6.3.0+dfsg-5+b2), libgomp1 (= 16.1.0-3), libgprofng0 (= 2.46.90.20260712-1), libhwasan0 (= 16.1.0-3), libisl23 (= 0.28-1), libitm1 (= 16.1.0-3), libjansson4 (= 2.15.1-1), liblsan0 (= 16.1.0-3), liblzma5 (= 5.8.3-1), libmagic-mgc (= 1:5.47-4), libmagic1t64 (= 1:5.47-4), libmd0 (= 1.2.0-2), libmount1 (= 2.42.2-2), libmpc3 (= 1.3.1-3), libmpfr6 (= 4.2.2-3), libpam-modules (= 1.7.0-8), libpam-modules-bin (= 1.7.0-8), libpam-runtime (= 1.7.0-8), libpam0g (= 1.7.0-8), libpcre2-8-0 (= 10.46-1+b2), libperl-dev (= 5.44.0~rc2-1), libperl5.44 (= 5.44.0~rc2-1), libpipeline1 (= 1.5.8-3), libquadmath0 (= 16.1.0-3), libseccomp2 (= 2.6.1-1), libselinux1 (= 3.11-2), libsframe3 (= 2.46.90.20260712-1), libsmartcols1 (= 2.42.2-2), libssl3t64 (= 3.6.3-1), libstdc++-15-dev (= 15.3.0-2), libstdc++6 (= 16.1.0-3), libsystemd0 (= 261.2-1), libtinfo6 (= 6.6+20260608-2), libtool (= 2.5.4-11), libtsan2 (= 16.1.0-3), libubsan1 (= 16.1.0-3), libuchardet0 (= 0.0.8-2+b2), libudev1 (= 261.2-1), libunistring5 (= 1.4.2-1), libuuid1 (= 2.42.2-2), libxml2-16 (= 2.15.3+dfsg-1), libzstd1 (= 1.5.7+dfsg-3+b2), linux-libc-dev (= 7.1.4-1), m4 (= 1.4.21-1), make (= 4.4.1-3), man-db (= 2.13.1-1), mawk (= 1.3.4.20260302-1), ncurses-base (= 6.6+20260608-2), ncurses-bin (= 6.6+20260608-2), openssl-provider-legacy (= 3.6.3-1), patch (= 2.8-2), perl (= 5.44.0~rc2-1), perl-base (= 5.44.0~rc2-1), perl-modules-5.44 (= 5.44.0~rc2-1), po-debconf (= 1.0.22), rpcsvc-proto (= 1.4.4-1), sed (= 4.9-3), sensible-utils (= 0.0.26), sysvinit-utils (= 3.18-1), tar (= 1.35+dfsg-4), util-linux (= 2.42.2-2), xz-utils (= 5.8.3-1), zlib1g (= 1:1.3.dfsg+really1.3.2-3), zlib1g-dev (= 1:1.3.dfsg+really1.3.2-3) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LANGUAGE="en_GB:en" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" LD_PRELOAD="libeatmydata.so" SOURCE_DATE_EPOCH="1655420490" +------------------------------------------------------------------------------+ | Package contents Fri, 24 Jul 2026 00:42:05 +0000 | +------------------------------------------------------------------------------+ libperlio-gzip-perl-dbgsym_0.20-1_amd64.deb ------------------------------------------- new Debian package, version 2.0. size 35388 bytes: control archive=540 bytes. 407 bytes, 12 lines control 106 bytes, 1 lines md5sums Package: libperlio-gzip-perl-dbgsym Source: libperlio-gzip-perl Version: 0.20-1 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian Perl Group Installed-Size: 49 Depends: libperlio-gzip-perl (= 0.20-1) Section: debug Priority: optional Description: debug symbols for libperlio-gzip-perl Build-Ids: 26f9c8afd04170dbec1c8cab2985949557814250 drwxr-xr-x root/root 0 2022-06-16 23:01 ./ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/lib/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/lib/debug/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/lib/debug/.build-id/26/ -rw-r--r-- root/root 39720 2022-06-16 23:01 ./usr/lib/debug/.build-id/26/f9c8afd04170dbec1c8cab2985949557814250.debug drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/share/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/share/doc/ lrwxrwxrwx root/root 0 2022-06-16 23:01 ./usr/share/doc/libperlio-gzip-perl-dbgsym -> libperlio-gzip-perl libperlio-gzip-perl_0.20-1_amd64.deb ------------------------------------ new Debian package, version 2.0. size 17268 bytes: control archive=932 bytes. 662 bytes, 14 lines control 575 bytes, 7 lines md5sums Package: libperlio-gzip-perl Version: 0.20-1 Architecture: amd64 Maintainer: Debian Perl Group Installed-Size: 55 Depends: perl (>= 5.44.0~rc2-1), perlapi-5.44.0, libc6 (>= 2.4), zlib1g (>= 1:1.1.4) Section: perl Priority: optional Homepage: https://metacpan.org/release/PerlIO-gzip Description: module providing a PerlIO layer to gzip/gunzip PerlIO::gzip is a Perl module that provides a PerlIO layer for manipulating files in the format used by the gzip program. Compression and decompression are both implemented, but cannot be used simultaneously (i.e. files cannot be opened for both reading and writing). drwxr-xr-x root/root 0 2022-06-16 23:01 ./ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/lib/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/lib/x86_64-linux-gnu/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/lib/x86_64-linux-gnu/perl5/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/lib/x86_64-linux-gnu/perl5/5.44/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/lib/x86_64-linux-gnu/perl5/5.44/PerlIO/ -rw-r--r-- root/root 3286 2017-06-21 19:30 ./usr/lib/x86_64-linux-gnu/perl5/5.44/PerlIO/gzip.pm drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/lib/x86_64-linux-gnu/perl5/5.44/auto/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/lib/x86_64-linux-gnu/perl5/5.44/auto/PerlIO/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/lib/x86_64-linux-gnu/perl5/5.44/auto/PerlIO/gzip/ -rw-r--r-- root/root 23040 2022-06-16 23:01 ./usr/lib/x86_64-linux-gnu/perl5/5.44/auto/PerlIO/gzip/gzip.so drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/share/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/share/doc/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/share/doc/libperlio-gzip-perl/ -rw-r--r-- root/root 1696 2017-06-21 19:31 ./usr/share/doc/libperlio-gzip-perl/README -rw-r--r-- root/root 1208 2022-06-16 23:01 ./usr/share/doc/libperlio-gzip-perl/changelog.Debian.gz -rw-r--r-- root/root 2963 2017-06-21 19:31 ./usr/share/doc/libperlio-gzip-perl/changelog.gz -rw-r--r-- root/root 1096 2022-06-16 23:01 ./usr/share/doc/libperlio-gzip-perl/copyright drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/share/man/ drwxr-xr-x root/root 0 2022-06-16 23:01 ./usr/share/man/man3/ -rw-r--r-- root/root 2300 2022-06-16 23:01 ./usr/share/man/man3/PerlIO::gzip.3pm.gz +------------------------------------------------------------------------------+ | Post Build Fri, 24 Jul 2026 00:42:06 +0000 | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup Fri, 24 Jul 2026 00:42:06 +0000 | +------------------------------------------------------------------------------+ Purging /build/libperlio-gzip-perl-m5TNjO Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary Fri, 24 Jul 2026 00:42:06 +0000 | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 908 Build-Time: 4 Distribution: perl-5.44-throwaway Host Architecture: amd64 Install-Time: 4 Job: /srv/debomatic/incoming/libperlio-gzip-perl_0.20-1.dsc Machine Architecture: amd64 Package: libperlio-gzip-perl Package-Time: 12 Source-Version: 0.20-1 Space: 908 Status: successful Version: 0.20-1 -------------------------------------------------------------------------------- Finished at 2026-07-24T00:42:05Z Build needed 00:00:12, 908k disk space