sbuild (Debian sbuild) 0.91.10 (27 June 2026) on carme.larted.org.uk +==============================================================================+ | libjcode-pm-perl 2.07-1 (amd64) Thu, 09 Jul 2026 20:32:47 +0000 | +==============================================================================+ Package: libjcode-pm-perl Version: 2.07-1 Source Version: 2.07-1 Distribution: perl-5.44-throwaway Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: Setting up the chroot... I: Creating chroot session... I: Setting up log color... +------------------------------------------------------------------------------+ | Chroot Setup Commands Thu, 09 Jul 2026 20:32:48 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libjcode-pm-perl_2.07-1 perl-5.44-throwaway amd64 ------------------------------------------------------------------------------------------------------------------------ I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libjcode-pm-perl_2.07-1 perl-5.44-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: Setting up apt archive... +------------------------------------------------------------------------------+ | Update chroot Thu, 09 Jul 2026 20:32:48 +0000 | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.44 InRelease [3039 B] Get:1 file:/srv/reprepro perl-5.44 InRelease [3039 B] Get:2 http://deb.debian.org/debian unstable InRelease [193 kB] Get:3 http://deb.debian.org/debian sid InRelease [193 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 Packages.diff/Index [63.6 kB] Get:5 http://deb.debian.org/debian sid/main Sources.diff/Index [63.6 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 Packages T-2026-07-09-2000.39-F-2026-07-09-2000.39.pdiff [16.4 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 Packages T-2026-07-09-2000.39-F-2026-07-09-2000.39.pdiff [16.4 kB] Get:7 http://deb.debian.org/debian sid/main Sources T-2026-07-09-2000.39-F-2026-07-09-2000.39.pdiff [22.0 kB] Get:7 http://deb.debian.org/debian sid/main Sources T-2026-07-09-2000.39-F-2026-07-09-2000.39.pdiff [22.0 kB] Fetched 551 kB in 3s (215 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files Thu, 09 Jul 2026 20:32:53 +0000 | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/libjcode-pm-perl_2.07-1.dsc exists in /srv/debomatic/incoming; copying to chroot +------------------------------------------------------------------------------+ | Install package build dependencies Thu, 09 Jul 2026 20:32:53 +0000 | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 13), perl-xs-dev, perl, build-essential Filtered Build-Depends: debhelper-compat (= 13), perl-xs-dev, perl, build-essential dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/build/libjcode-pm-perl-fsG6UZ/resolver-JgErDk/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/build/libjcode-pm-perl-fsG6UZ/resolver-JgErDk/apt_archive ./ InRelease Get:2 copy:/build/libjcode-pm-perl-fsG6UZ/resolver-JgErDk/apt_archive ./ Release [609 B] Ign:3 copy:/build/libjcode-pm-perl-fsG6UZ/resolver-JgErDk/apt_archive ./ Release.gpg Get:4 copy:/build/libjcode-pm-perl-fsG6UZ/resolver-JgErDk/apt_archive ./ Sources [626 B] Get:5 copy:/build/libjcode-pm-perl-fsG6UZ/resolver-JgErDk/apt_archive ./ Packages [658 B] Fetched 1893 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libcrypt-dev libdebhelper-perl libelf1t64 libfile-stripnondeterminism-perl libmagic-mgc libmagic1t64 libperl-dev libpipeline1 libtool libuchardet0 libxml2-16 m4 man-db po-debconf sensible-utils Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev gnulib-l10n groff libtool-doc gfortran | fortran95-compiler m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx python3:any libarchive-cpio-perl libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libcrypt-dev libdebhelper-perl libelf1t64 libfile-stripnondeterminism-perl libmagic-mgc libmagic1t64 libperl-dev libpipeline1 libtool libuchardet0 libxml2-16 m4 man-db po-debconf sbuild-build-depends-main-dummy sensible-utils 0 upgraded, 31 newly installed, 0 to remove and 0 not upgraded. Need to get 12.0 MB/13.2 MB of archives. After this operation, 60.6 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.26 [27.0 kB] Get:2 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.47-4 [345 kB] Get:3 file:/srv/reprepro perl-5.44/main amd64 libperl-dev amd64 5.44.0~rc2-1 [1169 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.47-4 [111 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.47-4 [43.0 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 1.0-3 [332 kB] Get:7 copy:/build/libjcode-pm-perl-fsG6UZ/resolver-JgErDk/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [864 B] Get:8 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-2+b2 [69.0 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.24.1-1 [1336 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.42.2-1 [100.0 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-3 [49.2 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.21-1 [332 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.73-2 [516 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1+nmu1 [60.0 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.18.1-4 [877 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 autopoint all 1.0-3 [820 kB] Get:18 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 14.3 [77.3 kB] Get:19 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-11 [539 kB] Get:20 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 22 [12.2 kB] Get:21 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:22 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.15.1-1 [17.1 kB] Get:23 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.15.1-1 [6020 B] Get:24 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.195-1 [58.1 kB] Get:25 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.16-4 [108 kB] Get:26 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.15.3+dfsg-1 [642 kB] Get:27 http://deb.debian.org/debian unstable/main amd64 gettext amd64 1.0-3 [2658 kB] Get:28 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:29 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.22 [216 kB] Get:30 http://deb.debian.org/debian unstable/main amd64 debhelper all 14.3 [934 kB] Get:31 http://deb.debian.org/debian unstable/main amd64 libcrypt-dev amd64 1:4.5.1-1+b1 [127 kB] Preconfiguring packages ... Fetched 12.0 MB in 0s (115 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 14518 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.47-4_amd64.deb ... Unpacking libmagic-mgc (1:5.47-4) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.47-4_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.47-4) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.47-4_amd64.deb ... Unpacking file (1:5.47-4) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_1.0-3_amd64.deb ... Unpacking gettext-base (1.0-3) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-2+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-2+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.24.1-1_amd64.deb ... Unpacking groff-base (1.24.1-1) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.42.2-1_amd64.deb ... Unpacking bsdextrautils (2.42.2-1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-3_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-3) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.21-1_amd64.deb ... Unpacking m4 (1.4.21-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.73-2_all.deb ... Unpacking autoconf (2.73-2) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1+nmu1_all.deb ... Unpacking autotools-dev (20240727.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-4_all.deb ... Unpacking automake (1:1.18.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_1.0-3_all.deb ... Unpacking autopoint (1.0-3) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_14.3_all.deb ... Unpacking libdebhelper-perl (14.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-11_all.deb ... Unpacking libtool (2.5.4-11) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_22_all.deb ... Unpacking dh-autoreconf (22) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.1-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.195-1_amd64.deb ... Unpacking libelf1t64:amd64 (0.195-1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-4_amd64.deb ... Unpacking dwz (0.16-4) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../23-libxml2-16_2.15.3+dfsg-1_amd64.deb ... Unpacking libxml2-16:amd64 (2.15.3+dfsg-1) ... Selecting previously unselected package gettext. Preparing to unpack .../24-gettext_1.0-3_amd64.deb ... Unpacking gettext (1.0-3) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../25-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../26-po-debconf_1.0.22_all.deb ... Unpacking po-debconf (1.0.22) ... Selecting previously unselected package debhelper. Preparing to unpack .../27-debhelper_14.3_all.deb ... Unpacking debhelper (14.3) ... Selecting previously unselected package libcrypt-dev:amd64. Preparing to unpack .../28-libcrypt-dev_1%3a4.5.1-1+b1_amd64.deb ... Unpacking libcrypt-dev:amd64 (1:4.5.1-1+b1) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../29-libperl-dev_5.44.0~rc2-1_amd64.deb ... Unpacking libperl-dev:amd64 (5.44.0~rc2-1) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../30-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.8-3) ... Setting up bsdextrautils (2.42.2-1) ... Setting up libmagic-mgc (1:5.47-4) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:amd64 (2.15.3+dfsg-1) ... Setting up libdebhelper-perl (14.3) ... Setting up libmagic1t64:amd64 (1:5.47-4) ... Setting up gettext-base (1.0-3) ... Setting up m4 (1.4.21-1) ... Setting up file (1:5.47-4) ... Setting up libelf1t64:amd64 (0.195-1) ... Setting up autotools-dev (20240727.1+nmu1) ... Setting up autopoint (1.0-3) ... Setting up autoconf (2.73-2) ... Setting up dwz (0.16-4) ... Setting up sensible-utils (0.0.26) ... Setting up libcrypt-dev:amd64 (1:4.5.1-1+b1) ... Setting up libuchardet0:amd64 (0.0.8-2+b2) ... Setting up automake (1:1.18.1-4) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.1-1) ... Setting up gettext (1.0-3) ... Setting up libtool (2.5.4-11) ... Setting up libperl-dev:amd64 (5.44.0~rc2-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (22) ... Setting up dh-strip-nondeterminism (1.15.1-1) ... Setting up groff-base (1.24.1-1) ... Setting up po-debconf (1.0.22) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (14.3) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.42-17) ... +------------------------------------------------------------------------------+ | Check architectures Thu, 09 Jul 2026 20:32:58 +0000 | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in any) +------------------------------------------------------------------------------+ | Build environment Thu, 09 Jul 2026 20:32:58 +0000 | +------------------------------------------------------------------------------+ Kernel: Linux 7.0.10+deb14-amd64 #1 SMP PREEMPT_DYNAMIC Debian 7.0.10-1 (2026-05-27) amd64 (x86_64) Toolchain package versions: binutils_2.46.50.20260617-1 dpkg-dev_1.23.7 g++-15_15.3.0-1 gcc-15_15.3.0-1 libc6-dev_2.42-17 libstdc++-15-dev_15.3.0-1 libstdc++6_16.1.0-2 linux-libc-dev_7.1.3-1 Package versions: apt_3.3.1 autoconf_2.73-2 automake_1:1.18.1-4 autopoint_1.0-3 autotools-dev_20240727.1+nmu1 base-files_14.2 base-passwd_3.6.8 bash_5.3-3 binutils_2.46.50.20260617-1 binutils-common_2.46.50.20260617-1 binutils-x86-64-linux-gnu_2.46.50.20260617-1 bsdextrautils_2.42.2-1 build-essential_12.12 bzip2_1.0.8-6+b2 coreutils_9.10-1 cpp_4:15.2.0-5+b1 cpp-15_15.3.0-1 cpp-15-x86-64-linux-gnu_15.3.0-1 cpp-x86-64-linux-gnu_4:15.2.0-5+b1 dash_0.5.12-12 debconf_1.5.92 debhelper_14.3 debian-archive-keyring_2025.1 debianutils_5.23.2 dh-autoreconf_22 dh-strip-nondeterminism_1.15.1-1 diffutils_1:3.12-1 dirmngr_2.4.9-5 dpkg_1.23.7 dpkg-dev_1.23.7 dwz_0.16-4 eatmydata_131-2 file_1:5.47-4 findutils_4.10.0-4 g++_4:15.2.0-5+b1 g++-15_15.3.0-1 g++-15-x86-64-linux-gnu_15.3.0-1 g++-x86-64-linux-gnu_4:15.2.0-5+b1 gcc_4:15.2.0-5+b1 gcc-15_15.3.0-1 gcc-15-base_15.3.0-1 gcc-15-x86-64-linux-gnu_15.3.0-1 gcc-16-base_16.1.0-2 gcc-x86-64-linux-gnu_4:15.2.0-5+b1 gettext_1.0-3 gettext-base_1.0-3 gnupg_2.4.9-5 gnupg-l10n_2.4.9-5 gpg_2.4.9-5 gpg-agent_2.4.9-5 gpgconf_2.4.9-5 gpgsm_2.4.9-5 grep_3.12-1 groff-base_1.24.1-1 gzip_1.13-1 hostname_3.25 init-system-helpers_1.69 intltool-debian_0.35.0+20060710.6 libacl1_2.4.0-1 libapt-pkg7.0_3.3.1 libarchive-zip-perl_1.68-1 libasan8_16.1.0-2 libassuan9_3.0.2-2+b2 libatomic1_16.1.0-2 libattr1_1:2.6.0-1 libaudit-common_1:4.1.2-1 libaudit1_1:4.1.2-1+b1 libbinutils_2.46.50.20260617-1 libblkid1_2.42.2-1 libbz2-1.0_1.0.8-6+b2 libc-bin_2.42-17 libc-dev-bin_2.42-17 libc-gconv-modules-extra_2.42-17 libc6_2.42-17 libc6-dev_2.42-17 libcap-ng0_0.9.3-1+b1 libcc1-0_16.1.0-2 libcrypt-dev_1:4.5.1-1+b1 libcrypt1_1:4.5.1-1+b1 libctf-nobfd0_2.46.50.20260617-1 libctf0_2.46.50.20260617-1 libdb5.3t64_5.3.28+dfsg2-11+b1 libdebconfclient0_0.283 libdebhelper-perl_14.3 libdpkg-perl_1.23.7 libeatmydata1_131-2+b2 libelf1t64_0.195-1 libffi8_3.5.2-4 libfile-stripnondeterminism-perl_1.15.1-1 libgcc-15-dev_15.3.0-1 libgcc-s1_16.1.0-2 libgcrypt20_1.12.2-1 libgdbm-compat4t64_1.26-1+b2 libgdbm6t64_1.26-1+b2 libgmp10_2:6.3.0+dfsg-5+b2 libgnutls30t64_3.8.13-1 libgomp1_16.1.0-2 libgpg-error0_1.61-3 libgprofng0_2.46.50.20260617-1 libhogweed6t64_3.10.2-1+b1 libhwasan0_16.1.0-2 libidn2-0_2.3.8-5 libisl23_0.27-2 libitm1_16.1.0-2 libjansson4_2.15.1-1 libksba8_1.8.0-3 libldap2_2.6.13+dfsg-1+b1 liblsan0_16.1.0-2 liblz4-1_1.10.0-10 liblzma5_5.8.3-1 libmagic-mgc_1:5.47-4 libmagic1t64_1:5.47-4 libmd0_1.2.0-2 libmount1_2.42.2-1 libmpc3_1.3.1-3 libmpfr6_4.2.2-3 libncursesw6_6.6+20260608-2 libnettle8t64_3.10.2-1+b1 libnpth0t64_1.8-3+b2 libp11-kit0_0.26.2-3 libpam-modules_1.7.0-8 libpam-modules-bin_1.7.0-8 libpam-runtime_1.7.0-8 libpam0g_1.7.0-8 libpcre2-8-0_10.46-1+b2 libperl-dev_5.44.0~rc2-1 libperl5.40_5.40.1-8 libperl5.44_5.44.0~rc2-1 libpipeline1_1.5.8-3 libquadmath0_16.1.0-2 libreadline8t64_8.3-4 libsasl2-2_2.1.28+dfsg1-11 libsasl2-modules-db_2.1.28+dfsg1-11 libseccomp2_2.6.0-2+b1 libselinux1_3.10-1 libsframe3_2.46.50.20260617-1 libsmartcols1_2.42.2-1 libsqlite3-0_3.53.3-1 libssl3t64_3.6.3-1 libstdc++-15-dev_15.3.0-1 libstdc++6_16.1.0-2 libsystemd0_261.1-2 libtasn1-6_4.21.0-2+b1 libtinfo6_6.6+20260608-2 libtool_2.5.4-11 libtsan2_16.1.0-2 libubsan1_16.1.0-2 libuchardet0_0.0.8-2+b2 libudev1_261.1-2 libunistring5_1.4.2-1 libuuid1_2.42.2-1 libxml2-16_2.15.3+dfsg-1 libxxhash0_0.8.3-2+b2 libzstd1_1.5.7+dfsg-3+b2 linux-libc-dev_7.1.3-1 m4_1.4.21-1 make_4.4.1-3 man-db_2.13.1-1 mawk_1.3.4.20260302-1 ncurses-base_6.6+20260608-2 ncurses-bin_6.6+20260608-2 openssl-provider-legacy_3.6.3-1 patch_2.8-2 perl_5.44.0~rc2-1 perl-base_5.44.0~rc2-1 perl-modules-5.40_5.40.1-8 perl-modules-5.44_5.44.0~rc2-1 pinentry-curses_1.3.2-4 po-debconf_1.0.22 readline-common_8.3-4 rpcsvc-proto_1.4.4-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-3 sensible-utils_0.0.26 sqv_1.4.0-1 sysvinit-utils_3.18-1 tar_1.35+dfsg-4 util-linux_2.42.2-1 xz-utils_5.8.3-1 zlib1g_1:1.3.dfsg+really1.3.2-3 +------------------------------------------------------------------------------+ | Build Thu, 09 Jul 2026 20:32:58 +0000 | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libjcode-pm-perl Binary: libjcode-pm-perl Architecture: any Version: 2.07-1 Maintainer: Debian Perl Group Uploaders: Atsushi KAMOSHIDA , Andreas Tille Homepage: https://metacpan.org/release/Jcode Standards-Version: 4.7.2 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libjcode-pm-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libjcode-pm-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), perl-xs-dev, perl:native Package-List: libjcode-pm-perl deb perl optional arch=any Checksums-Sha1: 1d0a695235f46c759f90a0c5e4cd196027b63f1b 350179 libjcode-pm-perl_2.07.orig.tar.gz f9a10b6d09ee7270ec497599143fdb77af27b27e 2416 libjcode-pm-perl_2.07-1.debian.tar.xz Checksums-Sha256: ed1ce473ec869089e52016cfc8355165ebc37be9694ba4e829c7eb4ba1c45f8d 350179 libjcode-pm-perl_2.07.orig.tar.gz 6aa29374e2f8088cd0f0ea9f7e4d839b8b5ad234706c707c479e617bbb2047b1 2416 libjcode-pm-perl_2.07-1.debian.tar.xz Files: f6c52253ff69a44c38a9183c469f6eb0 350179 libjcode-pm-perl_2.07.orig.tar.gz 9fdc981a8f5d8c2be1e7735d8e7ab4aa 2416 libjcode-pm-perl_2.07-1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQJFBAEBCgAvFiEE8fAHMgoDVUHwpmPKV4oElNHGRtEFAmiLnvkRHHRpbGxlQGRl Ymlhbi5vcmcACgkQV4oElNHGRtEn3A/8DB62dh+CkXgHHFxUOKI82Pti0P0WkXQD QGXKSVgFUmbBoKxq5nKQsf2u10gcILBCeugErhU8VwfoL+EyEV8z7z4GB8RbGYh0 uI3YkkNK0iMdAgoTemcBCWXXNjlgrUenEiZuvQs0/CG3j2A/8Qt3asq2H/x1Vb0r cqqHwUH16ghqtlsDVNQMoAo1v5muYL1IdSQxECPXrFTqQEW+nDuoTw4gdE6Hlolu /J668FS36Ohu8lTXlPyULvFC3OdYNHnX+AqTiVhHQlq7TeIEf0pGHIpvCD+49pgI 0k1ldmBPMCyeWL6x0jfNiJ8AzdiyV9PvhSTQ917j6cBzDiN0VPoUHFyyDjksq4lb LHYpm5UGlduQRvV427P5A4undEEyIJM/789/MCu9+nxCR1K66vb1eBsPiV4lMaTM D5ZAHqaupu17lLQLOwbAqhCMwIdZFAd3ZsmhIzyLWPNrhS4gvupF0htlJ1TPpsCE fy+ZkhLEvFw3RkOnpzaVtL3YfU++U6zN7/VYCBAanxpP4+4HX+eBUoVdANBtnqMR 4/AmZzCWRUvi1h7o0Vze+MWdHC2Y2XHZ428CLAUBTuotN/1n7V17OVk2qJsMRWuw a+oTHnmXbJdfM6GtjU2yICjYnpIDuU+MH8ww/lxnHBe++wjXgQzRQiIDs+2QCg2W K7159jrrXhc= =GC+p -----END PGP SIGNATURE----- dpkg-source: warning: cannot verify inline signature for ./libjcode-pm-perl_2.07-1.dsc: missing OpenPGP keyrings dpkg-source: info: verifying ./libjcode-pm-perl_2.07-1.dsc dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-keyring.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-tag2upload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-nonupload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-maintainers.pgp dpkg-source: info: extracting libjcode-pm-perl in /build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07 dpkg-source: info: unpacking libjcode-pm-perl_2.07.orig.tar.gz dpkg-source: info: unpacking libjcode-pm-perl_2.07-1.debian.tar.xz clean up apt cache ------------------ Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Time Build Commands Thu, 09 Jul 2026 20:32:58 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libjcode-pm-perl_2.07-1 perl-5.44-throwaway amd64 ------------------------------------------------------------------------------------------------------------------------ I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libjcode-pm-perl_2.07-1 perl-5.44-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07 SCHROOT_ALIAS_NAME=perl-5.44-throwaway-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.44-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.44-amd64-debomatic-9b2040b0-9eee-4052-9050-bbd7fb59c06c SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -Zxz dpkg-buildpackage: info: source package libjcode-pm-perl dpkg-buildpackage: info: source version 2.07-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Andreas Tille dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean dpkg-source -Zxz -b . dpkg-source: info: using source format '3.0 (quilt)' dpkg-source: info: building libjcode-pm-perl using existing ../libjcode-pm-perl_2.07.orig.tar.gz dpkg-source: info: building libjcode-pm-perl in ../libjcode-pm-perl_2.07-1.debian.tar.xz dpkg-source: info: building libjcode-pm-perl in ../libjcode-pm-perl_2.07-1.dsc debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" LD="x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Jcode Writing MYMETA.yml and MYMETA.json dh_auto_build make -j2 make[1]: Entering directory '/build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07' cp Jcode/Nihongo.pod blib/lib/Jcode/Nihongo.pod cp Jcode.pm blib/lib/Jcode.pm Manifying 2 pod documents make[1]: Leaving directory '/build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07' dh_auto_test make -j2 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/append.t ... 1..50 # Running under perl version 5.044000 for linux # Current time local: Thu Jul 9 20:33:00 2026 # Current time GMT: Thu Jul 9 20:33:00 2026 # Using Test.pm version 1.31 ok 1 # jcode($str,jis)->append($str,jis) ok 2 # jcode($str,jis) .= $str ok 3 # jcode($str,jis)->append($str,utf8) ok 4 # jcode($str,jis) .= $str ok 5 # jcode($str,jis)->append($str,ucs2) ok 6 # jcode($str,jis) .= $str ok 7 # jcode($str,jis)->append($str,euc) ok 8 # jcode($str,jis) .= $str ok 9 # jcode($str,jis)->append($str,sjis) ok 10 # jcode($str,jis) .= $str ok 11 # jcode($str,utf8)->append($str,jis) ok 12 # jcode($str,utf8) .= $str ok 13 # jcode($str,utf8)->append($str,utf8) ok 14 # jcode($str,utf8) .= $str ok 15 # jcode($str,utf8)->append($str,ucs2) ok 16 # jcode($str,utf8) .= $str ok 17 # jcode($str,utf8)->append($str,euc) ok 18 # jcode($str,utf8) .= $str ok 19 # jcode($str,utf8)->append($str,sjis) ok 20 # jcode($str,utf8) .= $str ok 21 # jcode($str,ucs2)->append($str,jis) ok 22 # jcode($str,ucs2) .= $str ok 23 # jcode($str,ucs2)->append($str,utf8) ok 24 # jcode($str,ucs2) .= $str ok 25 # jcode($str,ucs2)->append($str,ucs2) ok 26 # jcode($str,ucs2) .= $str ok 27 # jcode($str,ucs2)->append($str,euc) ok 28 # jcode($str,ucs2) .= $str ok 29 # jcode($str,ucs2)->append($str,sjis) ok 30 # jcode($str,ucs2) .= $str ok 31 # jcode($str,euc)->append($str,jis) ok 32 # jcode($str,euc) .= $str ok 33 # jcode($str,euc)->append($str,utf8) ok 34 # jcode($str,euc) .= $str ok 35 # jcode($str,euc)->append($str,ucs2) ok 36 # jcode($str,euc) .= $str ok 37 # jcode($str,euc)->append($str,euc) ok 38 # jcode($str,euc) .= $str ok 39 # jcode($str,euc)->append($str,sjis) ok 40 # jcode($str,euc) .= $str ok 41 # jcode($str,sjis)->append($str,jis) ok 42 # jcode($str,sjis) .= $str ok 43 # jcode($str,sjis)->append($str,utf8) ok 44 # jcode($str,sjis) .= $str ok 45 # jcode($str,sjis)->append($str,ucs2) ok 46 # jcode($str,sjis) .= $str ok 47 # jcode($str,sjis)->append($str,euc) ok 48 # jcode($str,sjis) .= $str ok 49 # jcode($str,sjis)->append($str,sjis) ok 50 # jcode($str,sjis) .= $str ok t/convert.t .. 1..83 # Running under perl version 5.044000 for linux # Current time local: Thu Jul 9 20:33:00 2026 # Current time GMT: Thu Jul 9 20:33:00 2026 # Using Test.pm version 1.31 ok 1 # ascii|x0208:$str jis => jis ok 2 # ascii|x0208:\$str jis => jis ok 3 # ascii|x0208:$str jis => sjis ok 4 # ascii|x0208:\$str jis => sjis ok 5 # ascii|x0208:$str jis => utf8 ok 6 # ascii|x0208:\$str jis => utf8 ok 7 # ascii|x0208:$str jis => ucs2 ok 8 # ascii|x0208:\$str jis => ucs2 ok 9 # ascii|x0208:$str jis => euc ok 10 # ascii|x0208:\$str jis => euc ok 11 # ascii|x0208:$str sjis => jis ok 12 # ascii|x0208:\$str sjis => jis ok 13 # ascii|x0208:$str sjis => sjis ok 14 # ascii|x0208:\$str sjis => sjis ok 15 # ascii|x0208:$str sjis => utf8 ok 16 # ascii|x0208:\$str sjis => utf8 ok 17 # ascii|x0208:$str sjis => ucs2 ok 18 # ascii|x0208:\$str sjis => ucs2 ok 19 # ascii|x0208:$str sjis => euc ok 20 # ascii|x0208:\$str sjis => euc ok 21 # ascii|x0208:$str utf8 => jis ok 22 # ascii|x0208:\$str utf8 => jis ok 23 # ascii|x0208:$str utf8 => sjis ok 24 # ascii|x0208:\$str utf8 => sjis ok 25 # ascii|x0208:$str utf8 => utf8 ok 26 # ascii|x0208:\$str utf8 => utf8 ok 27 # ascii|x0208:$str utf8 => ucs2 ok 28 # ascii|x0208:\$str utf8 => ucs2 ok 29 # ascii|x0208:$str utf8 => euc ok 30 # ascii|x0208:\$str utf8 => euc ok 31 # ascii|x0208:$str ucs2 => jis ok 32 # ascii|x0208:\$str ucs2 => jis ok 33 # ascii|x0208:$str ucs2 => sjis ok 34 # ascii|x0208:\$str ucs2 => sjis ok 35 # ascii|x0208:$str ucs2 => utf8 ok 36 # ascii|x0208:\$str ucs2 => utf8 ok 37 # ascii|x0208:$str ucs2 => ucs2 ok 38 # ascii|x0208:\$str ucs2 => ucs2 ok 39 # ascii|x0208:$str ucs2 => euc ok 40 # ascii|x0208:\$str ucs2 => euc ok 41 # ascii|x0208:$str euc => jis ok 42 # ascii|x0208:\$str euc => jis ok 43 # ascii|x0208:$str euc => sjis ok 44 # ascii|x0208:\$str euc => sjis ok 45 # ascii|x0208:$str euc => utf8 ok 46 # ascii|x0208:\$str euc => utf8 ok 47 # ascii|x0208:$str euc => ucs2 ok 48 # ascii|x0208:\$str euc => ucs2 ok 49 # ascii|x0208:$str euc => euc ok 50 # ascii|x0208:\$str euc => euc ok 51 # x0212:$str utf8 => utf8 ok 52 # x0212:\$str utf8 => utf8 ok 53 # x0212:$str utf8 => ucs2 ok 54 # x0212:\$str utf8 => ucs2 ok 55 # x0212:$str utf8 => euc ok 56 # x0212:\$str utf8 => euc ok 57 # x0212:$str utf8 => jis ok 58 # x0212:\$str utf8 => jis ok 59 # x0212:$str ucs2 => utf8 ok 60 # x0212:\$str ucs2 => utf8 ok 61 # x0212:$str ucs2 => ucs2 ok 62 # x0212:\$str ucs2 => ucs2 ok 63 # x0212:$str ucs2 => euc ok 64 # x0212:\$str ucs2 => euc ok 65 # x0212:$str ucs2 => jis ok 66 # x0212:\$str ucs2 => jis ok 67 # x0212:$str euc => utf8 ok 68 # x0212:\$str euc => utf8 ok 69 # x0212:$str euc => ucs2 ok 70 # x0212:\$str euc => ucs2 ok 71 # x0212:$str euc => euc ok 72 # x0212:\$str euc => euc ok 73 # x0212:$str euc => jis ok 74 # x0212:\$str euc => jis ok 75 # x0212:$str jis => utf8 ok 76 # x0212:\$str jis => utf8 ok 77 # x0212:$str jis => ucs2 ok 78 # x0212:\$str jis => ucs2 ok 79 # x0212:$str jis => euc ok 80 # x0212:\$str jis => euc ok 81 # x0212:$str jis => jis ok 82 # x0212:\$str jis => jis ok 83 # Jcode::convert("constant" ...) ok t/getcode.t .. 1..9 # Running under perl version 5.044000 for linux # Current time local: Thu Jul 9 20:33:00 2026 # Current time GMT: Thu Jul 9 20:33:00 2026 # Using Test.pm version 1.31 ok 1 # ascii|x0208:getcode($str, jis) -> jis ok 2 # ascii|x0208:getcode($str, sjis) -> sjis ok 3 # ascii|x0208:getcode($str, utf8) -> utf8 ok 4 # ascii|x0208:getcode($str, ucs2) -> ucs2 ok 5 # ascii|x0208:getcode($str, euc) -> euc ok 6 # x0212:getcode($str, jis) -> jis ok 7 # x0212:getcode($str, ucs2) -> ucs2 ok 8 # x0212:getcode($str, utf8) -> utf8 ok 9 # x0212:getcode($str, euc) -> euc ok t/h2z.t ...... 1..4 # Running under perl version 5.044000 for linux # Current time local: Thu Jul 9 20:33:00 2026 # Current time GMT: Thu Jul 9 20:33:00 2026 # Using Test.pm version 1.31 ok 1 # H2Z: h2z -> h2z ok 2 # H2Z: h2z -> z2h ok 3 # H2Z: z2h -> h2z ok 4 # H2Z: z2h -> z2h ok t/jfold.t .... 1..6 ok 1 - jfold() 1 ok 2 - jfold() 2 ok 3 - jfold() with kinsoku 1 ok 4 - jfold() with kinsoku 2 ok 5 - jfold() with kinsoku 3 ok 6 - Reported by Iwamoto ok t/length.t ... 1..5 # Running under perl version 5.044000 for linux # Current time local: Thu Jul 9 20:33:00 2026 # Current time GMT: Thu Jul 9 20:33:00 2026 # Using Test.pm version 1.31 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/mime.t ..... 1..24 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok t/new.t ...... 1..41 # Running under perl version 5.044000 for linux # Current time local: Thu Jul 9 20:33:00 2026 # Current time GMT: Thu Jul 9 20:33:00 2026 # Using Test.pm version 1.31 ok 1 # ascii|x0208:Jcode->new($str, utf8)->utf8 ok 2 # ascii|x0208:Jcode->new($str, utf8)->sjis ok 3 # ascii|x0208:Jcode->new($str, utf8)->jis ok 4 # ascii|x0208:Jcode->new($str, utf8)->euc ok 5 # ascii|x0208:Jcode->new($str, utf8)->ucs2 ok 6 # ascii|x0208:Jcode->new($str, sjis)->utf8 ok 7 # ascii|x0208:Jcode->new($str, sjis)->sjis ok 8 # ascii|x0208:Jcode->new($str, sjis)->jis ok 9 # ascii|x0208:Jcode->new($str, sjis)->euc ok 10 # ascii|x0208:Jcode->new($str, sjis)->ucs2 ok 11 # ascii|x0208:Jcode->new($str, jis)->utf8 ok 12 # ascii|x0208:Jcode->new($str, jis)->sjis ok 13 # ascii|x0208:Jcode->new($str, jis)->jis ok 14 # ascii|x0208:Jcode->new($str, jis)->euc ok 15 # ascii|x0208:Jcode->new($str, jis)->ucs2 ok 16 # ascii|x0208:Jcode->new($str, euc)->utf8 ok 17 # ascii|x0208:Jcode->new($str, euc)->sjis ok 18 # ascii|x0208:Jcode->new($str, euc)->jis ok 19 # ascii|x0208:Jcode->new($str, euc)->euc ok 20 # ascii|x0208:Jcode->new($str, euc)->ucs2 ok 21 # ascii|x0208:Jcode->new($str, ucs2)->utf8 ok 22 # ascii|x0208:Jcode->new($str, ucs2)->sjis ok 23 # ascii|x0208:Jcode->new($str, ucs2)->jis ok 24 # ascii|x0208:Jcode->new($str, ucs2)->euc ok 25 # ascii|x0208:Jcode->new($str, ucs2)->ucs2 ok 26 # x0212:Jcode->new($str, jis)->jis ok 27 # x0212:Jcode->new($str, jis)->euc ok 28 # x0212:Jcode->new($str, jis)->utf8 ok 29 # x0212:Jcode->new($str, jis)->ucs2 ok 30 # x0212:Jcode->new($str, euc)->jis ok 31 # x0212:Jcode->new($str, euc)->euc ok 32 # x0212:Jcode->new($str, euc)->utf8 ok 33 # x0212:Jcode->new($str, euc)->ucs2 ok 34 # x0212:Jcode->new($str, utf8)->jis ok 35 # x0212:Jcode->new($str, utf8)->euc ok 36 # x0212:Jcode->new($str, utf8)->utf8 ok 37 # x0212:Jcode->new($str, utf8)->ucs2 ok 38 # x0212:Jcode->new($str, ucs2)->jis ok 39 # x0212:Jcode->new($str, ucs2)->euc ok 40 # x0212:Jcode->new($str, ucs2)->utf8 ok 41 # x0212:Jcode->new($str, ucs2)->ucs2 ok t/perl581.t .. 1..5 ok 1 - FALLBACK: default ok 2 - FALLBACK: perlqq ok 3 - FALLBACK: xmlcref ok 4 - FALLBACK: htmlcref ok 5 - $j->MIME_Header ok t/regex.t .... 1..7 ok 1 - m// ok 2 - s/// ok 3 - m// pattern escape test ok 4 - m// flag escape test ok 5 - s/// pattern escape test ok 6 - s/// replace escape test ok 7 - s/// flag escape test ok t/tr.t ....... 1..10 # Running under perl version 5.044000 for linux # Current time local: Thu Jul 9 20:33:01 2026 # Current time GMT: Thu Jul 9 20:33:01 2026 # Using Test.pm version 1.31 ok 1 # H2Z: A-Za-zァ-ンｧ-ﾝ -> A-Za-zァ-ンｧ-ﾝ ok 2 # H2Z: A-Za-zァ-ンｧ-ﾝ -> a-zA-Zぁ-んｧ-ﾝ ok 3 # H2Z: a-zA-Zぁ-んｧ-ﾝ -> A-Za-zァ-ンｧ-ﾝ ok 4 # H2Z: a-zA-Zぁ-んｧ-ﾝ -> a-zA-Zぁ-んｧ-ﾝ ok 5 # H2Z: 'ぁ-ん', '', d ok 6 # tr ok 7 # tr ok 8 # tr/// from escape test ok 9 # tr/// to escape test ok 10 # tr/// flag escape test ok All tests successful. Files=11, Tests=244, 1 wallclock secs ( 0.03 usr 0.03 sys + 0.64 cusr 0.14 csys = 0.84 CPU) Result: PASS make[1]: Leaving directory '/build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libjcode-pm-perl/ make -j2 install DESTDIR=/build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07/debian/libjcode-pm-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07' Manifying 2 pod documents Installing /build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07/debian/libjcode-pm-perl/usr/share/perl5/Jcode.pm Installing /build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07/debian/libjcode-pm-perl/usr/share/perl5/Jcode/Nihongo.pod Installing /build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07/debian/libjcode-pm-perl/usr/share/man/man3/Jcode::Nihongo.3pm Installing /build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07/debian/libjcode-pm-perl/usr/share/man/man3/Jcode.3pm make[1]: Leaving directory '/build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07' dh_installdocs dh_installchangelogs dh_installman dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb dh_gencontrol dpkg-gencontrol: warning: Depends field of package libjcode-pm-perl: substitution variable ${shlibs:Depends} used, but is not defined dh_md5sums dh_builddeb dpkg-deb: building package 'libjcode-pm-perl' in '../libjcode-pm-perl_2.07-1_amd64.deb'. dpkg-genbuildinfo -O../libjcode-pm-perl_2.07-1_amd64.buildinfo dpkg-genchanges -O../libjcode-pm-perl_2.07-1_amd64.changes dpkg-genchanges: info: including full source code in upload dpkg-source -Zxz --after-build . dpkg-buildpackage: info: full upload (original source is included) -------------------------------------------------------------------------------- Build finished at 2026-07-09T20:33:02Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes Thu, 09 Jul 2026 20:33:02 +0000 | +------------------------------------------------------------------------------+ libjcode-pm-perl_2.07-1_amd64.changes: -------------------------------------- Format: 1.8 Date: Wed, 11 Jun 2025 22:13:30 +0200 Source: libjcode-pm-perl Binary: libjcode-pm-perl Architecture: source amd64 Version: 2.07-1 Distribution: perl-5.44-throwaway Urgency: medium Maintainer: Debian Perl Group Changed-By: Andreas Tille Description: libjcode-pm-perl - Perl extension interface to convert Japanese text Closes: 1007068 1107699 Changes: libjcode-pm-perl (2.07-1) unstable; urgency=medium . * New upstream version * Maintain package in Debian Perl Group Closes: #1107699 * Source format 3.0 (quilt) Closes: #1007068 * Add Homepage * Add watch file * d/copyright: DEP5 * d/rules: switch from debhelper to dh * debhelper-compat (= 13) * Build-Depends: perl-xs-dev, perl:native * Add ${misc:Depends} * Standards-Version: 4.7.2 (routine-update) * Reorder sequence of d/control fields by cme (routine-update) * Remove trailing whitespace in debian/changelog (routine-update) * Remove trailing whitespace in debian/control (routine-update) * Add lintian-overrides for national-encoding Checksums-Sha1: ce5b79b40f9eb73ac86cfa6e28a24326fa9b348d 1230 libjcode-pm-perl_2.07-1.dsc 1d0a695235f46c759f90a0c5e4cd196027b63f1b 350179 libjcode-pm-perl_2.07.orig.tar.gz f9a10b6d09ee7270ec497599143fdb77af27b27e 2416 libjcode-pm-perl_2.07-1.debian.tar.xz 226821c2d8d67bee4891ddf045f6e186fcf770ef 5028 libjcode-pm-perl_2.07-1_amd64.buildinfo e17eb65eab2ae725ea4bb2aabd12094e2743f9a5 28524 libjcode-pm-perl_2.07-1_amd64.deb Checksums-Sha256: 74c53563e439a604a3cc86b54edb2b063139abc7e2e23859765f5546de26054f 1230 libjcode-pm-perl_2.07-1.dsc ed1ce473ec869089e52016cfc8355165ebc37be9694ba4e829c7eb4ba1c45f8d 350179 libjcode-pm-perl_2.07.orig.tar.gz 6aa29374e2f8088cd0f0ea9f7e4d839b8b5ad234706c707c479e617bbb2047b1 2416 libjcode-pm-perl_2.07-1.debian.tar.xz 257d209de16a2da07f6d0e2cca563f603c7d944aad363f1c94cd7d74f1275521 5028 libjcode-pm-perl_2.07-1_amd64.buildinfo c1eb7bb8bd4d237012ba2f968d19d8bb3eb792caf84200f4ac9e1aa57538f9b7 28524 libjcode-pm-perl_2.07-1_amd64.deb Files: 48aac14146ad21d093d987d0e8c85437 1230 perl optional libjcode-pm-perl_2.07-1.dsc f6c52253ff69a44c38a9183c469f6eb0 350179 perl optional libjcode-pm-perl_2.07.orig.tar.gz 9fdc981a8f5d8c2be1e7735d8e7ab4aa 2416 perl optional libjcode-pm-perl_2.07-1.debian.tar.xz 0a97e46b5c092e6963a3bdc3cb56b5aa 5028 perl optional libjcode-pm-perl_2.07-1_amd64.buildinfo 4531d82a5d7072b660bdaff64e128b9e 28524 perl optional libjcode-pm-perl_2.07-1_amd64.deb +------------------------------------------------------------------------------+ | Buildinfo Thu, 09 Jul 2026 20:33:03 +0000 | +------------------------------------------------------------------------------+ Format: 1.0 Source: libjcode-pm-perl Binary: libjcode-pm-perl Architecture: amd64 source Version: 2.07-1 Checksums-Md5: 48aac14146ad21d093d987d0e8c85437 1230 libjcode-pm-perl_2.07-1.dsc 4531d82a5d7072b660bdaff64e128b9e 28524 libjcode-pm-perl_2.07-1_amd64.deb Checksums-Sha1: ce5b79b40f9eb73ac86cfa6e28a24326fa9b348d 1230 libjcode-pm-perl_2.07-1.dsc e17eb65eab2ae725ea4bb2aabd12094e2743f9a5 28524 libjcode-pm-perl_2.07-1_amd64.deb Checksums-Sha256: 74c53563e439a604a3cc86b54edb2b063139abc7e2e23859765f5546de26054f 1230 libjcode-pm-perl_2.07-1.dsc c1eb7bb8bd4d237012ba2f968d19d8bb3eb792caf84200f4ac9e1aa57538f9b7 28524 libjcode-pm-perl_2.07-1_amd64.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Thu, 09 Jul 2026 20:33:02 +0000 Build-Path: /build/libjcode-pm-perl-fsG6UZ/libjcode-pm-perl-2.07 Build-Tainted-By: usr-local-has-programs Installed-Build-Depends: autoconf (= 2.73-2), automake (= 1:1.18.1-4), autopoint (= 1.0-3), autotools-dev (= 20240727.1+nmu1), base-files (= 14.2), base-passwd (= 3.6.8), bash (= 5.3-3), binutils (= 2.46.50.20260617-1), binutils-common (= 2.46.50.20260617-1), binutils-x86-64-linux-gnu (= 2.46.50.20260617-1), bsdextrautils (= 2.42.2-1), build-essential (= 12.12), bzip2 (= 1.0.8-6+b2), coreutils (= 9.10-1), cpp (= 4:15.2.0-5+b1), cpp-15 (= 15.3.0-1), cpp-15-x86-64-linux-gnu (= 15.3.0-1), cpp-x86-64-linux-gnu (= 4:15.2.0-5+b1), dash (= 0.5.12-12), debconf (= 1.5.92), debhelper (= 14.3), debianutils (= 5.23.2), dh-autoreconf (= 22), dh-strip-nondeterminism (= 1.15.1-1), diffutils (= 1:3.12-1), dpkg (= 1.23.7), dpkg-dev (= 1.23.7), dwz (= 0.16-4), file (= 1:5.47-4), findutils (= 4.10.0-4), g++ (= 4:15.2.0-5+b1), g++-15 (= 15.3.0-1), g++-15-x86-64-linux-gnu (= 15.3.0-1), g++-x86-64-linux-gnu (= 4:15.2.0-5+b1), gcc (= 4:15.2.0-5+b1), gcc-15 (= 15.3.0-1), gcc-15-base (= 15.3.0-1), gcc-15-x86-64-linux-gnu (= 15.3.0-1), gcc-16-base (= 16.1.0-2), gcc-x86-64-linux-gnu (= 4:15.2.0-5+b1), gettext (= 1.0-3), gettext-base (= 1.0-3), grep (= 3.12-1), groff-base (= 1.24.1-1), gzip (= 1.13-1), hostname (= 3.25), init-system-helpers (= 1.69), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.4.0-1), libarchive-zip-perl (= 1.68-1), libasan8 (= 16.1.0-2), libatomic1 (= 16.1.0-2), libattr1 (= 1:2.6.0-1), libaudit-common (= 1:4.1.2-1), libaudit1 (= 1:4.1.2-1+b1), libbinutils (= 2.46.50.20260617-1), libblkid1 (= 2.42.2-1), libbz2-1.0 (= 1.0.8-6+b2), libc-bin (= 2.42-17), libc-dev-bin (= 2.42-17), libc-gconv-modules-extra (= 2.42-17), libc6 (= 2.42-17), libc6-dev (= 2.42-17), libcap-ng0 (= 0.9.3-1+b1), libcc1-0 (= 16.1.0-2), libcrypt-dev (= 1:4.5.1-1+b1), libcrypt1 (= 1:4.5.1-1+b1), libctf-nobfd0 (= 2.46.50.20260617-1), libctf0 (= 2.46.50.20260617-1), libdb5.3t64 (= 5.3.28+dfsg2-11+b1), libdebconfclient0 (= 0.283), libdebhelper-perl (= 14.3), libdpkg-perl (= 1.23.7), libelf1t64 (= 0.195-1), libfile-stripnondeterminism-perl (= 1.15.1-1), libgcc-15-dev (= 15.3.0-1), libgcc-s1 (= 16.1.0-2), libgdbm-compat4t64 (= 1.26-1+b2), libgdbm6t64 (= 1.26-1+b2), libgmp10 (= 2:6.3.0+dfsg-5+b2), libgomp1 (= 16.1.0-2), libgprofng0 (= 2.46.50.20260617-1), libhwasan0 (= 16.1.0-2), libisl23 (= 0.27-2), libitm1 (= 16.1.0-2), libjansson4 (= 2.15.1-1), liblsan0 (= 16.1.0-2), liblzma5 (= 5.8.3-1), libmagic-mgc (= 1:5.47-4), libmagic1t64 (= 1:5.47-4), libmd0 (= 1.2.0-2), libmount1 (= 2.42.2-1), libmpc3 (= 1.3.1-3), libmpfr6 (= 4.2.2-3), libpam-modules (= 1.7.0-8), libpam-modules-bin (= 1.7.0-8), libpam-runtime (= 1.7.0-8), libpam0g (= 1.7.0-8), libpcre2-8-0 (= 10.46-1+b2), libperl-dev (= 5.44.0~rc2-1), libperl5.44 (= 5.44.0~rc2-1), libpipeline1 (= 1.5.8-3), libquadmath0 (= 16.1.0-2), libseccomp2 (= 2.6.0-2+b1), libselinux1 (= 3.10-1), libsframe3 (= 2.46.50.20260617-1), libsmartcols1 (= 2.42.2-1), libssl3t64 (= 3.6.3-1), libstdc++-15-dev (= 15.3.0-1), libstdc++6 (= 16.1.0-2), libsystemd0 (= 261.1-2), libtinfo6 (= 6.6+20260608-2), libtool (= 2.5.4-11), libtsan2 (= 16.1.0-2), libubsan1 (= 16.1.0-2), libuchardet0 (= 0.0.8-2+b2), libudev1 (= 261.1-2), libunistring5 (= 1.4.2-1), libuuid1 (= 2.42.2-1), libxml2-16 (= 2.15.3+dfsg-1), libzstd1 (= 1.5.7+dfsg-3+b2), linux-libc-dev (= 7.1.3-1), m4 (= 1.4.21-1), make (= 4.4.1-3), man-db (= 2.13.1-1), mawk (= 1.3.4.20260302-1), ncurses-base (= 6.6+20260608-2), ncurses-bin (= 6.6+20260608-2), openssl-provider-legacy (= 3.6.3-1), patch (= 2.8-2), perl (= 5.44.0~rc2-1), perl-base (= 5.44.0~rc2-1), perl-modules-5.44 (= 5.44.0~rc2-1), po-debconf (= 1.0.22), rpcsvc-proto (= 1.4.4-1), sed (= 4.9-3), sensible-utils (= 0.0.26), sysvinit-utils (= 3.18-1), tar (= 1.35+dfsg-4), util-linux (= 2.42.2-1), xz-utils (= 5.8.3-1), zlib1g (= 1:1.3.dfsg+really1.3.2-3) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LANGUAGE="en_GB:en" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" LD_PRELOAD="libeatmydata.so" SOURCE_DATE_EPOCH="1749672810" +------------------------------------------------------------------------------+ | Package contents Thu, 09 Jul 2026 20:33:03 +0000 | +------------------------------------------------------------------------------+ libjcode-pm-perl_2.07-1_amd64.deb --------------------------------- new Debian package, version 2.0. size 28524 bytes: control archive=944 bytes. 548 bytes, 15 lines control 731 bytes, 10 lines md5sums Package: libjcode-pm-perl Version: 2.07-1 Architecture: amd64 Maintainer: Debian Perl Group Installed-Size: 66 Depends: perl:any Section: perl Priority: optional Homepage: https://metacpan.org/release/Jcode Description: Perl extension interface to convert Japanese text Jcode.pm is a Perl module that handles various Japanese charsets. It has all features available on jcode.pl PLUS - Object-oriented approach on Japanese text handling - mime header handling - Unicode feature (UCS2 and UTF8) drwxr-xr-x root/root 0 2025-06-11 20:13 ./ drwxr-xr-x root/root 0 2025-06-11 20:13 ./usr/ drwxr-xr-x root/root 0 2025-06-11 20:13 ./usr/share/ drwxr-xr-x root/root 0 2025-06-11 20:13 ./usr/share/doc/ drwxr-xr-x root/root 0 2025-06-11 20:13 ./usr/share/doc/libjcode-pm-perl/ -rw-r--r-- root/root 696 2005-02-18 03:27 ./usr/share/doc/libjcode-pm-perl/MANIFEST -rw-r--r-- root/root 711 2008-05-10 18:15 ./usr/share/doc/libjcode-pm-perl/README -rw-r--r-- root/root 797 2025-06-11 20:13 ./usr/share/doc/libjcode-pm-perl/changelog.Debian.gz -rw-r--r-- root/root 1686 2008-05-10 18:15 ./usr/share/doc/libjcode-pm-perl/changelog.gz -rw-r--r-- root/root 1134 2025-06-11 20:13 ./usr/share/doc/libjcode-pm-perl/copyright drwxr-xr-x root/root 0 2025-06-11 20:13 ./usr/share/lintian/ drwxr-xr-x root/root 0 2025-06-11 20:13 ./usr/share/lintian/overrides/ -rw-r--r-- root/root 73 2025-06-11 20:13 ./usr/share/lintian/overrides/libjcode-pm-perl drwxr-xr-x root/root 0 2025-06-11 20:13 ./usr/share/man/ drwxr-xr-x root/root 0 2025-06-11 20:13 ./usr/share/man/man3/ -rw-r--r-- root/root 5325 2025-06-11 20:13 ./usr/share/man/man3/Jcode.3pm.gz -rw-r--r-- root/root 6620 2025-06-11 20:13 ./usr/share/man/man3/Jcode::Nihongo.3pm.gz drwxr-xr-x root/root 0 2025-06-11 20:13 ./usr/share/perl5/ -rw-r--r-- root/root 23108 2008-05-10 18:15 ./usr/share/perl5/Jcode.pm drwxr-xr-x root/root 0 2025-06-11 20:13 ./usr/share/perl5/Jcode/ -rw-r--r-- root/root 10138 2005-02-19 06:50 ./usr/share/perl5/Jcode/Nihongo.pod +------------------------------------------------------------------------------+ | Post Build Thu, 09 Jul 2026 20:33:03 +0000 | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup Thu, 09 Jul 2026 20:33:03 +0000 | +------------------------------------------------------------------------------+ Purging /build/libjcode-pm-perl-fsG6UZ Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary Thu, 09 Jul 2026 20:33:04 +0000 | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 2180 Build-Time: 4 Distribution: perl-5.44-throwaway Host Architecture: amd64 Install-Time: 5 Job: /srv/debomatic/incoming/libjcode-pm-perl_2.07-1.dsc Machine Architecture: amd64 Package: libjcode-pm-perl Package-Time: 15 Source-Version: 2.07-1 Space: 2180 Status: successful Version: 2.07-1 -------------------------------------------------------------------------------- Finished at 2026-07-09T20:33:02Z Build needed 00:00:15, 2180k disk space