sbuild (Debian sbuild) 0.91.10 (27 June 2026) on carme.larted.org.uk +==============================================================================+ | libio-stty-perl 0.08-1 (amd64) Thu, 09 Jul 2026 20:28:45 +0000 | +==============================================================================+ Package: libio-stty-perl Version: 0.08-1 Source Version: 0.08-1 Distribution: perl-5.44-throwaway Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: Setting up the chroot... I: Creating chroot session... I: Setting up log color... +------------------------------------------------------------------------------+ | Chroot Setup Commands Thu, 09 Jul 2026 20:28:46 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libio-stty-perl_0.08-1 perl-5.44-throwaway amd64 ----------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libio-stty-perl_0.08-1 perl-5.44-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: Setting up apt archive... +------------------------------------------------------------------------------+ | Update chroot Thu, 09 Jul 2026 20:28:46 +0000 | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.44 InRelease [3039 B] Get:1 file:/srv/reprepro perl-5.44 InRelease [3039 B] Hit:2 http://deb.debian.org/debian unstable InRelease Hit:3 http://deb.debian.org/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files Thu, 09 Jul 2026 20:28:52 +0000 | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/libio-stty-perl_0.08-1.dsc exists in /srv/debomatic/incoming; copying to chroot +------------------------------------------------------------------------------+ | Install package build dependencies Thu, 09 Jul 2026 20:28:52 +0000 | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 13), build-essential, libio-pty-perl, perl Filtered Build-Depends: debhelper-compat (= 13), build-essential, libio-pty-perl, perl dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/build/libio-stty-perl-cK5HIi/resolver-hSoK3d/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/build/libio-stty-perl-cK5HIi/resolver-hSoK3d/apt_archive ./ InRelease Get:2 copy:/build/libio-stty-perl-cK5HIi/resolver-hSoK3d/apt_archive ./ Release [609 B] Ign:3 copy:/build/libio-stty-perl-cK5HIi/resolver-hSoK3d/apt_archive ./ Release.gpg Get:4 copy:/build/libio-stty-perl-cK5HIi/resolver-hSoK3d/apt_archive ./ Sources [653 B] Get:5 copy:/build/libio-stty-perl-cK5HIi/resolver-hSoK3d/apt_archive ./ Packages [661 B] Fetched 1923 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libfile-stripnondeterminism-perl libio-pty-perl libmagic-mgc libmagic1t64 libpipeline1 libtool libuchardet0 libxml2-16 m4 man-db po-debconf sensible-utils Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev gnulib-l10n groff libtool-doc gfortran | fortran95-compiler m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx python3:any libarchive-cpio-perl libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libfile-stripnondeterminism-perl libio-pty-perl libmagic-mgc libmagic1t64 libpipeline1 libtool libuchardet0 libxml2-16 m4 man-db po-debconf sbuild-build-depends-main-dummy sensible-utils 0 upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 11.9 MB/11.9 MB of archives. After this operation, 54.5 MB of additional disk space will be used. Get:1 file:/srv/reprepro perl-5.44/main amd64 libio-pty-perl amd64 1:1.31-1+b1 [38.4 kB] Get:2 copy:/build/libio-stty-perl-cK5HIi/resolver-hSoK3d/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [868 B] Get:3 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.26 [27.0 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.47-4 [345 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.47-4 [111 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.47-4 [43.0 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 1.0-3 [332 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-2+b2 [69.0 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.24.1-1 [1336 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.42.2-1 [100.0 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-3 [49.2 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.21-1 [332 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.73-2 [516 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1+nmu1 [60.0 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.18.1-4 [877 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 autopoint all 1.0-3 [820 kB] Get:18 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 14.3 [77.3 kB] Get:19 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-11 [539 kB] Get:20 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 22 [12.2 kB] Get:21 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:22 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.15.1-1 [17.1 kB] Get:23 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.15.1-1 [6020 B] Get:24 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.195-1 [58.1 kB] Get:25 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.16-4 [108 kB] Get:26 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.15.3+dfsg-1 [642 kB] Get:27 http://deb.debian.org/debian unstable/main amd64 gettext amd64 1.0-3 [2658 kB] Get:28 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:29 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.22 [216 kB] Get:30 http://deb.debian.org/debian unstable/main amd64 debhelper all 14.3 [934 kB] Preconfiguring packages ... Fetched 11.9 MB in 0s (142 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 14518 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.47-4_amd64.deb ... Unpacking libmagic-mgc (1:5.47-4) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.47-4_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.47-4) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.47-4_amd64.deb ... Unpacking file (1:5.47-4) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_1.0-3_amd64.deb ... Unpacking gettext-base (1.0-3) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-2+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-2+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.24.1-1_amd64.deb ... Unpacking groff-base (1.24.1-1) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.42.2-1_amd64.deb ... Unpacking bsdextrautils (2.42.2-1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-3_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-3) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.21-1_amd64.deb ... Unpacking m4 (1.4.21-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.73-2_all.deb ... Unpacking autoconf (2.73-2) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1+nmu1_all.deb ... Unpacking autotools-dev (20240727.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.18.1-4_all.deb ... Unpacking automake (1:1.18.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_1.0-3_all.deb ... Unpacking autopoint (1.0-3) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_14.3_all.deb ... Unpacking libdebhelper-perl (14.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.5.4-11_all.deb ... Unpacking libtool (2.5.4-11) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_22_all.deb ... Unpacking dh-autoreconf (22) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.15.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.15.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.1-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.195-1_amd64.deb ... Unpacking libelf1t64:amd64 (0.195-1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.16-4_amd64.deb ... Unpacking dwz (0.16-4) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../23-libxml2-16_2.15.3+dfsg-1_amd64.deb ... Unpacking libxml2-16:amd64 (2.15.3+dfsg-1) ... Selecting previously unselected package gettext. Preparing to unpack .../24-gettext_1.0-3_amd64.deb ... Unpacking gettext (1.0-3) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../25-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../26-po-debconf_1.0.22_all.deb ... Unpacking po-debconf (1.0.22) ... Selecting previously unselected package debhelper. Preparing to unpack .../27-debhelper_14.3_all.deb ... Unpacking debhelper (14.3) ... Selecting previously unselected package libio-pty-perl. Preparing to unpack .../28-libio-pty-perl_1.31-1+b1_amd64.deb ... Unpacking libio-pty-perl (1:1.31-1+b1) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../29-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.8-3) ... Setting up bsdextrautils (2.42.2-1) ... Setting up libio-pty-perl (1:1.31-1+b1) ... Setting up libmagic-mgc (1:5.47-4) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:amd64 (2.15.3+dfsg-1) ... Setting up libdebhelper-perl (14.3) ... Setting up libmagic1t64:amd64 (1:5.47-4) ... Setting up gettext-base (1.0-3) ... Setting up m4 (1.4.21-1) ... Setting up file (1:5.47-4) ... Setting up libelf1t64:amd64 (0.195-1) ... Setting up autotools-dev (20240727.1+nmu1) ... Setting up autopoint (1.0-3) ... Setting up autoconf (2.73-2) ... Setting up dwz (0.16-4) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:amd64 (0.0.8-2+b2) ... Setting up automake (1:1.18.1-4) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.1-1) ... Setting up gettext (1.0-3) ... Setting up libtool (2.5.4-11) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (22) ... Setting up dh-strip-nondeterminism (1.15.1-1) ... Setting up groff-base (1.24.1-1) ... Setting up po-debconf (1.0.22) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (14.3) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.42-17) ... +------------------------------------------------------------------------------+ | Check architectures Thu, 09 Jul 2026 20:28:56 +0000 | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Build environment Thu, 09 Jul 2026 20:28:56 +0000 | +------------------------------------------------------------------------------+ Kernel: Linux 7.0.10+deb14-amd64 #1 SMP PREEMPT_DYNAMIC Debian 7.0.10-1 (2026-05-27) amd64 (x86_64) Toolchain package versions: binutils_2.46.50.20260617-1 dpkg-dev_1.23.7 g++-15_15.3.0-1 gcc-15_15.3.0-1 libc6-dev_2.42-17 libstdc++-15-dev_15.3.0-1 libstdc++6_16.1.0-2 linux-libc-dev_7.1.3-1 Package versions: apt_3.3.1 autoconf_2.73-2 automake_1:1.18.1-4 autopoint_1.0-3 autotools-dev_20240727.1+nmu1 base-files_14.2 base-passwd_3.6.8 bash_5.3-3 binutils_2.46.50.20260617-1 binutils-common_2.46.50.20260617-1 binutils-x86-64-linux-gnu_2.46.50.20260617-1 bsdextrautils_2.42.2-1 build-essential_12.12 bzip2_1.0.8-6+b2 coreutils_9.10-1 cpp_4:15.2.0-5+b1 cpp-15_15.3.0-1 cpp-15-x86-64-linux-gnu_15.3.0-1 cpp-x86-64-linux-gnu_4:15.2.0-5+b1 dash_0.5.12-12 debconf_1.5.92 debhelper_14.3 debian-archive-keyring_2025.1 debianutils_5.23.2 dh-autoreconf_22 dh-strip-nondeterminism_1.15.1-1 diffutils_1:3.12-1 dirmngr_2.4.9-5 dpkg_1.23.7 dpkg-dev_1.23.7 dwz_0.16-4 eatmydata_131-2 file_1:5.47-4 findutils_4.10.0-4 g++_4:15.2.0-5+b1 g++-15_15.3.0-1 g++-15-x86-64-linux-gnu_15.3.0-1 g++-x86-64-linux-gnu_4:15.2.0-5+b1 gcc_4:15.2.0-5+b1 gcc-15_15.3.0-1 gcc-15-base_15.3.0-1 gcc-15-x86-64-linux-gnu_15.3.0-1 gcc-16-base_16.1.0-2 gcc-x86-64-linux-gnu_4:15.2.0-5+b1 gettext_1.0-3 gettext-base_1.0-3 gnupg_2.4.9-5 gnupg-l10n_2.4.9-5 gpg_2.4.9-5 gpg-agent_2.4.9-5 gpgconf_2.4.9-5 gpgsm_2.4.9-5 grep_3.12-1 groff-base_1.24.1-1 gzip_1.13-1 hostname_3.25 init-system-helpers_1.69 intltool-debian_0.35.0+20060710.6 libacl1_2.4.0-1 libapt-pkg7.0_3.3.1 libarchive-zip-perl_1.68-1 libasan8_16.1.0-2 libassuan9_3.0.2-2+b2 libatomic1_16.1.0-2 libattr1_1:2.6.0-1 libaudit-common_1:4.1.2-1 libaudit1_1:4.1.2-1+b1 libbinutils_2.46.50.20260617-1 libblkid1_2.42.2-1 libbz2-1.0_1.0.8-6+b2 libc-bin_2.42-17 libc-dev-bin_2.42-17 libc-gconv-modules-extra_2.42-17 libc6_2.42-17 libc6-dev_2.42-17 libcap-ng0_0.9.3-1+b1 libcc1-0_16.1.0-2 libcrypt1_1:4.5.1-1+b1 libctf-nobfd0_2.46.50.20260617-1 libctf0_2.46.50.20260617-1 libdb5.3t64_5.3.28+dfsg2-11+b1 libdebconfclient0_0.283 libdebhelper-perl_14.3 libdpkg-perl_1.23.7 libeatmydata1_131-2+b2 libelf1t64_0.195-1 libffi8_3.5.2-4 libfile-stripnondeterminism-perl_1.15.1-1 libgcc-15-dev_15.3.0-1 libgcc-s1_16.1.0-2 libgcrypt20_1.12.2-1 libgdbm-compat4t64_1.26-1+b2 libgdbm6t64_1.26-1+b2 libgmp10_2:6.3.0+dfsg-5+b2 libgnutls30t64_3.8.13-1 libgomp1_16.1.0-2 libgpg-error0_1.61-3 libgprofng0_2.46.50.20260617-1 libhogweed6t64_3.10.2-1+b1 libhwasan0_16.1.0-2 libidn2-0_2.3.8-5 libio-pty-perl_1:1.31-1+b1 libisl23_0.27-2 libitm1_16.1.0-2 libjansson4_2.15.1-1 libksba8_1.8.0-3 libldap2_2.6.13+dfsg-1+b1 liblsan0_16.1.0-2 liblz4-1_1.10.0-10 liblzma5_5.8.3-1 libmagic-mgc_1:5.47-4 libmagic1t64_1:5.47-4 libmd0_1.2.0-2 libmount1_2.42.2-1 libmpc3_1.3.1-3 libmpfr6_4.2.2-3 libncursesw6_6.6+20260608-2 libnettle8t64_3.10.2-1+b1 libnpth0t64_1.8-3+b2 libp11-kit0_0.26.2-3 libpam-modules_1.7.0-8 libpam-modules-bin_1.7.0-8 libpam-runtime_1.7.0-8 libpam0g_1.7.0-8 libpcre2-8-0_10.46-1+b2 libperl5.40_5.40.1-8 libperl5.44_5.44.0~rc2-1 libpipeline1_1.5.8-3 libquadmath0_16.1.0-2 libreadline8t64_8.3-4 libsasl2-2_2.1.28+dfsg1-11 libsasl2-modules-db_2.1.28+dfsg1-11 libseccomp2_2.6.0-2+b1 libselinux1_3.10-1 libsframe3_2.46.50.20260617-1 libsmartcols1_2.42.2-1 libsqlite3-0_3.53.3-1 libssl3t64_3.6.3-1 libstdc++-15-dev_15.3.0-1 libstdc++6_16.1.0-2 libsystemd0_261.1-2 libtasn1-6_4.21.0-2+b1 libtinfo6_6.6+20260608-2 libtool_2.5.4-11 libtsan2_16.1.0-2 libubsan1_16.1.0-2 libuchardet0_0.0.8-2+b2 libudev1_261.1-2 libunistring5_1.4.2-1 libuuid1_2.42.2-1 libxml2-16_2.15.3+dfsg-1 libxxhash0_0.8.3-2+b2 libzstd1_1.5.7+dfsg-3+b2 linux-libc-dev_7.1.3-1 m4_1.4.21-1 make_4.4.1-3 man-db_2.13.1-1 mawk_1.3.4.20260302-1 ncurses-base_6.6+20260608-2 ncurses-bin_6.6+20260608-2 openssl-provider-legacy_3.6.3-1 patch_2.8-2 perl_5.44.0~rc2-1 perl-base_5.44.0~rc2-1 perl-modules-5.40_5.40.1-8 perl-modules-5.44_5.44.0~rc2-1 pinentry-curses_1.3.2-4 po-debconf_1.0.22 readline-common_8.3-4 rpcsvc-proto_1.4.4-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-3 sensible-utils_0.0.26 sqv_1.4.0-1 sysvinit-utils_3.18-1 tar_1.35+dfsg-4 util-linux_2.42.2-1 xz-utils_5.8.3-1 zlib1g_1:1.3.dfsg+really1.3.2-3 +------------------------------------------------------------------------------+ | Build Thu, 09 Jul 2026 20:28:56 +0000 | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libio-stty-perl Binary: libio-stty-perl Architecture: all Version: 0.08-1 Maintainer: Debian Perl Group Uploaders: Nick Morrott Homepage: https://metacpan.org/release/IO-Stty Standards-Version: 4.7.4 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libio-stty-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libio-stty-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: libio-pty-perl , perl Package-List: libio-stty-perl deb perl optional arch=all Checksums-Sha1: 67aed2966a5c05306596f62684d862f46e89db4d 26588 libio-stty-perl_0.08.orig.tar.gz 5b983d9bbf63e03b5e5487c6e68ae6cebc27d719 3460 libio-stty-perl_0.08-1.debian.tar.xz Checksums-Sha256: 50043f389898cdf693f00a68e44f1f03b56da646ae72c82f6089856ff8df0439 26588 libio-stty-perl_0.08.orig.tar.gz b9ae01ce98026e9b0f3934f9a8134b0f75330f4d7c9d21eef0d81d10529298ba 3460 libio-stty-perl_0.08-1.debian.tar.xz Files: 40f52f4c36d01cae8c9f2bf30c619893 26588 libio-stty-perl_0.08.orig.tar.gz 73d9a0fec7ee06e2227fae37b7abf03c 3460 libio-stty-perl_0.08-1.debian.tar.xz Dgit: 743fb985d93be01c93fedc411f56547559897597 debian archive/debian/0.08-1 https://git.dgit.debian.org/libio-stty-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmnP9CFfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgZT8A/7BJ9IDZ0dgUF7tvPi7B3YnrGT1nHJ0dmkBeTR50UV6YsU+zocqiNBXRWv Y0wjg2aPCtlq4SwfT9mOU3ZBnScDQHGpCTIPRQkFaG0M1Fm0Im75w4nHFWDpUzto 2cE/FS3PXyGYDKeAi+XWtNXWRFeRyazk999G2mDkJ90uqXEHN8EjFniHGFB0d89C GFOTgKxDZZ/hLfgeE8TouCE458csgg6foRGdGGi/vNzbyK+gw07nm4VYyQ8SXc8M 0f6D64rxLjZSQrIdjuOLenm3cjqG2faLg1QzYaQST8wL5nmsPBHe1kNafIYDSACV EZACHOO5d7YUvjdmE1AjXjyVvd/wRHVCDPcmSLe68PnEYWQriNlZgVbBvZwIwTgm /YPjGS3b/tMazjZBn+0TxO8yCFbSqdYwEGxw0zrXCeiG0cAHmUsvgt32OGAci1Zy cHrXfNvopIQrcjQH+Xhd30rm0N8aDuN/gmYoggdhf0QdBzDu4x1uHflRqwViDmWm 71SeKdPmD0W3USyV8Qv3ObjuBPl+GFXWqcR4RMhzBQBIXjfCeY7Dj6IQ2qstATZc Trt6L9NrYQuBuP8PVfmw/Ar/XKJnuv7WdsBromJ6UgZM3ecz7NxXbAqaHpZxr8ii xlTuAzD6pFdw8DyIGRB4Hpnf0uENU3lBVzxq7yKjn1480jPwUQA= =7w87 -----END PGP SIGNATURE----- dpkg-source: warning: cannot verify inline signature for ./libio-stty-perl_0.08-1.dsc: missing OpenPGP keyrings dpkg-source: info: verifying ./libio-stty-perl_0.08-1.dsc dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-keyring.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-tag2upload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-nonupload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-maintainers.pgp dpkg-source: info: extracting libio-stty-perl in /build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08 dpkg-source: info: unpacking libio-stty-perl_0.08.orig.tar.gz dpkg-source: info: unpacking libio-stty-perl_0.08-1.debian.tar.xz clean up apt cache ------------------ Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Time Build Commands Thu, 09 Jul 2026 20:28:57 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libio-stty-perl_0.08-1 perl-5.44-throwaway amd64 ----------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libio-stty-perl_0.08-1 perl-5.44-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08 SCHROOT_ALIAS_NAME=perl-5.44-throwaway-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.44-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.44-amd64-debomatic-79c73d98-5b4b-4132-a3a2-05dcb7bc95fa SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -Zxz dpkg-buildpackage: info: source package libio-stty-perl dpkg-buildpackage: info: source version 0.08-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Samuel Young dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean dpkg-source -Zxz -b . dpkg-source: info: using source format '3.0 (quilt)' dpkg-source: info: building libio-stty-perl using existing ../libio-stty-perl_0.08.orig.tar.gz dpkg-source: info: building libio-stty-perl in ../libio-stty-perl_0.08-1.debian.tar.xz dpkg-source: info: building libio-stty-perl in ../libio-stty-perl_0.08-1.dsc debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor OPTIMIZE="-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" LD="x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for IO::Stty Writing MYMETA.yml and MYMETA.json dh_auto_build make -j2 make[1]: Entering directory '/build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08' cp lib/IO/Stty.pm blib/lib/IO/Stty.pm Manifying 1 pod document make[1]: Leaving directory '/build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08' dh_auto_test make -j2 test TEST_VERBOSE=1 make[1]: Entering directory '/build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing IO::Stty 0.08, Perl 5.044000, /usr/bin/perl t/00-load.t ................. 1..1 ok 1 - use IO::Stty; ok t/01-baud-rate.t ............ # Subtest: ospeed sets baud rate on pty ok 1 - ospeed 9600 takes effect 1..1 ok 1 - ospeed sets baud rate on pty # Subtest: ispeed sets baud rate on pty ok 1 - ispeed 9600 takes effect 1..1 ok 2 - ispeed sets baud rate on pty # Subtest: single-arg numeric sets both speeds ok 1 - single-arg 9600 sets ospeed ok 2 - single-arg 9600 sets ispeed 1..2 ok 3 - single-arg numeric sets both speeds # Subtest: exta is alias for 19200 ok 1 - exta sets ospeed to 19200 ok 2 - no warnings for exta 1..2 ok 4 - exta is alias for 19200 # Subtest: extb is alias for 38400 ok 1 - extb sets ospeed to 38400 ok 2 - no warnings for extb 1..2 ok 5 - extb is alias for 38400 # Subtest: 134.5 is alias for B134 ok 1 - 134.5 sets ospeed to B134 ok 2 - no warnings for 134.5 1..2 ok 6 - 134.5 is alias for B134 # Subtest: single-arg exta sets both speeds ok 1 - single-arg exta sets ospeed ok 2 - single-arg exta sets ispeed ok 3 - no warnings for single-arg exta 1..3 ok 7 - single-arg exta sets both speeds # Subtest: single-arg 134.5 sets both speeds ok 1 - single-arg 134.5 sets ospeed ok 2 - single-arg 134.5 sets ispeed ok 3 - no warnings for single-arg 134.5 1..3 ok 8 - single-arg 134.5 sets both speeds # Subtest: unknown baud rate produces warning, does not die ok 1 - stty does not die on unknown rate (old code dies via POSIX autoloader) ok 2 - exactly one warning emitted ok 3 - warning mentions the invalid rate 1..3 ok 9 - unknown baud rate produces warning, does not die # Subtest: crafted baud rate cannot call arbitrary POSIX functions ok 1 - stty with invalid rate does not die (old code croaks on symbolic deref under strict) ok 2 - decoy POSIX::Bevil_test_probe was not called (old code without strict would dispatch it) ok 3 - ospeed unchanged after rejected rate ok 4 - warning emitted for unknown rate ok 5 - warning names the rejected rate 1..5 ok 10 - crafted baud rate cannot call arbitrary POSIX functions 1..10 ok t/01-cc-to-hat.t ............ 1..13 ok 1 - _cc_to_hat: undef value ok 2 - _cc_to_hat: VDISABLE value (disabled) ok 3 - _cc_to_hat: SOH -> ^A ok 4 - _cc_to_hat: ETX -> ^C (intr) ok 5 - _cc_to_hat: EOT -> ^D (eof) ok 6 - _cc_to_hat: BS -> ^H (erase) ok 7 - _cc_to_hat: NAK -> ^U (kill) ok 8 - _cc_to_hat: SUB -> ^Z (susp) ok 9 - _cc_to_hat: US -> ^_ ok 10 - _cc_to_hat: DEL -> ^? ok 11 - _cc_to_hat: printable A passes through ok 12 - _cc_to_hat: printable a passes through ok 13 - _cc_to_hat: 255 is valid char when VDISABLE=0 ok t/01-functional.t ........... # Subtest: toggle echo flag ok 1 - echo is set after stty echo ok 2 - echo is cleared after stty -echo 1..2 ok 1 - toggle echo flag # Subtest: toggle multiple flags in one call ok 1 - -echo applied ok 2 - -icanon applied ok 3 - -isig applied ok 4 - echo re-enabled ok 5 - icanon re-enabled ok 6 - isig re-enabled 1..6 ok 2 - toggle multiple flags in one call # Subtest: cflag settings (parenb, cs bits) ok 1 # skip pty driver does not honour cs7/parenb ok 2 # skip pty driver does not honour cs7/parenb ok 3 - cs8 set correctly ok 4 - parenb disabled 1..4 ok 3 - cflag settings (parenb, cs bits) # Subtest: iflag settings (icrnl, ixon) ok 1 - -icrnl applied ok 2 - -ixon applied ok 3 - icrnl re-enabled ok 4 - ixon re-enabled 1..4 ok 4 - iflag settings (icrnl, ixon) # Subtest: igncr toggle ok 1 - igncr set ok 2 - igncr cleared 1..2 ok 5 - igncr toggle # Subtest: -a output shows igncr ok 1 - -a shows igncr when set ok 2 - -a shows -igncr when cleared 1..2 ok 6 - -a output shows igncr # Subtest: oflag (opost) ok 1 - -opost applied ok 2 - opost re-enabled 1..2 ok 7 - oflag (opost) # Subtest: -g roundtrip preserves settings ok 1 - -g returns a value ok 2 - -g format is colon-separated integers ok 3 - -g output has 17 fields ok 4 - echo is back on before restore ok 5 - echo still off after restore ok 6 - icanon still off after restore ok 7 - opost still off after restore 1..7 ok 8 - -g roundtrip preserves settings # Subtest: -a output format ok 1 - -a returns output ok 2 - -a contains speed line ok 3 - -a mentions echo ok 4 - -a mentions icanon ok 5 - -a mentions opost ok 6 - -a shows character size ok 7 - -a shows intr control char 1..7 ok 9 - -a output format # Subtest: raw mode ok 1 - raw: -brkint ok 2 - raw: -icrnl ok 3 - raw: -ixon ok 4 - raw: -opost ok 5 - raw: -isig ok 6 - raw: -icanon ok 7 - raw: min=1 ok 8 - raw: time=0 1..8 ok 10 - raw mode # Subtest: cooked mode (opposite of raw) ok 1 - cooked: brkint set ok 2 - cooked: icrnl set ok 3 - cooked: ixon set ok 4 - cooked: opost set ok 5 - cooked: isig set ok 6 - cooked: icanon set 1..6 ok 11 - cooked mode (opposite of raw) # Subtest: -raw is same as cooked ok 1 - -raw restores icanon ok 2 - -raw restores isig ok 3 - -raw restores opost 1..3 ok 12 - -raw is same as cooked # Subtest: -cooked is same as raw ok 1 - -cooked clears icanon ok 2 - -cooked clears isig ok 3 - -cooked clears opost 1..3 ok 13 - -cooked is same as raw # Subtest: sane mode ok 1 - sane: echo enabled ok 2 - sane: icanon enabled ok 3 - sane: isig enabled ok 4 - sane: echoe enabled ok 5 - sane: echok enabled ok 6 - sane: icrnl enabled ok 7 - sane: brkint enabled ok 8 - sane: opost enabled ok 9 - sane: cread enabled ok 10 - sane: -echonl ok 11 - sane: -noflsh ok 12 - sane: intr=3 (^C) ok 13 - sane: quit=28 (^\) ok 14 - sane: erase=8 (^H) ok 15 - sane: kill=21 (^U) ok 16 - sane: eof=4 (^D) 1..16 ok 14 - sane mode # Subtest: pass8 / -pass8 ok 1 - pass8: -parenb ok 2 - pass8: -istrip ok 3 - pass8: cs8 ok 4 - -pass8: istrip ok 5 # skip pty driver does not honour parenb/cs7 ok 6 # skip pty driver does not honour parenb/cs7 1..6 ok 15 - pass8 / -pass8 # Subtest: ek resets erase and kill ok 1 - ek: erase=8 ok 2 - ek: kill=21 1..2 ok 16 - ek resets erase and kill # Subtest: dec combination ok 1 - dec: echoe ok 2 - dec: echok ok 3 - dec: intr=3 ok 4 - dec: erase=127 (DEL) ok 5 - dec: kill=21 1..5 ok 17 - dec combination # Subtest: crt combination ok 1 - echoe cleared before crt ok 2 - crt: echoe set ok 3 - crt: echok set 1..3 ok 18 - crt combination # Subtest: crterase alias for echoe ok 1 - crterase clears ECHOE ok 2 - crterase sets ECHOE 1..2 ok 19 - crterase alias for echoe # Subtest: set control chars by integer ok 1 - intr set to 5 ok 2 - quit set to 30 ok 3 - eof set to 10 1..3 ok 20 - set control chars by integer # Subtest: set control chars by hat notation ok 1 - intr set to ^C (3) ok 2 - quit set to ^\ (28) ok 3 - erase set to ^? (127) ok 4 - eof set to ^D (4) 1..4 ok 21 - set control chars by hat notation # Subtest: disable control char with undef ok 1 - eol disabled via undef (uses _POSIX_VDISABLE) ok 2 - eol disabled via ^- (uses _POSIX_VDISABLE) 1..2 ok 22 - disable control char with undef # Subtest: set min and time ok 1 - min set to 5 ok 2 - time set to 10 1..2 ok 23 - set min and time # Subtest: -a output shows min and time ok 1 - -a shows min value ok 2 - -a shows time value 1..2 ok 24 - -a output shows min and time # Subtest: invalid parameter produces warning ok 1 - exactly one warning emitted ok 2 - warning mentions the bad param 1..2 ok 25 - invalid parameter produces warning # Subtest: valid params mixed with invalid ok 1 - one warning for nonsense ok 2 - correct param in warning ok 3 - -echo still applied despite invalid param ok 4 - icanon still applied despite invalid param 1..4 ok 26 - valid params mixed with invalid # Subtest: version flag ok 1 - -v returns version string 1..1 ok 27 - version flag # Subtest: non-tty handle returns undef ok 1 - non-tty returns undef 1..1 ok 28 - non-tty handle returns undef # Subtest: toggle iexten flag ok 1 - iexten is set after stty iexten ok 2 - iexten is cleared after stty -iexten 1..2 ok 29 - toggle iexten flag # Subtest: stty returns true on successful set ok 1 - stty returns true value when setting flags 1..1 ok 30 - stty returns true on successful set # Subtest: iexten appears in -a output ok 1 - -a output includes iexten 1..1 ok 31 - iexten appears in -a output 1..31 ok t/01-parse-char-value.t ..... 1..24 ok 1 - decimal zero ok 2 - decimal 3 ok 3 - decimal 127 ok 4 - decimal 21 ok 5 - hat notation ^C (Ctrl-C) ok 6 - hat notation ^c (lowercase) ok 7 - hat notation ^D (Ctrl-D / EOF) ok 8 - hat notation ^? (DEL) ok 9 - hat notation ^A ok 10 - hat notation ^Z (Ctrl-Z / SUSP) ok 11 - hat notation ^@ (NUL) ok 12 - hat notation ^[ (ESC) ok 13 - hex 0x03 ok 14 - hex 0x7f (lowercase) ok 15 - hex 0x7F (uppercase) ok 16 - hex 0x1B ok 17 - hex 0x00 ok 18 - hex 0xff ok 19 - octal 03 ok 20 - octal 010 ok 21 - octal 017 ok 22 - octal 0177 ok 23 - undef disables character (returns _POSIX_VDISABLE) ok 24 - ^- disables character (returns _POSIX_VDISABLE) ok t/02-combination-aliases.t .. # Subtest: cbreak disables icanon ok 1 - icanon starts on ok 2 - cbreak clears icanon 1..2 ok 1 - cbreak disables icanon # Subtest: -cbreak enables icanon ok 1 - icanon starts off ok 2 - -cbreak sets icanon 1..2 ok 2 - -cbreak enables icanon # Subtest: evenp sets parenb -parodd cs7 ok 1 - no warnings ok 2 # skip pty driver does not honour parenb/cs7 ok 3 # skip pty driver does not honour parenb/cs7 ok 4 # skip pty driver does not honour parenb/cs7 1..4 ok 3 - evenp sets parenb -parodd cs7 # Subtest: parity is same as evenp ok 1 - no warnings ok 2 # skip pty driver does not honour parenb/cs7 ok 3 # skip pty driver does not honour parenb/cs7 ok 4 # skip pty driver does not honour parenb/cs7 1..4 ok 4 - parity is same as evenp # Subtest: oddp sets parenb parodd cs7 ok 1 - no warnings ok 2 # skip pty driver does not honour parenb/parodd/cs7 ok 3 # skip pty driver does not honour parenb/parodd/cs7 ok 4 # skip pty driver does not honour parenb/parodd/cs7 1..4 ok 5 - oddp sets parenb parodd cs7 # Subtest: -evenp clears parenb and sets cs8 ok 1 - -evenp: -parenb ok 2 - -evenp: cs8 1..2 ok 6 - -evenp clears parenb and sets cs8 # Subtest: -parity clears parenb and sets cs8 ok 1 - -parity: -parenb ok 2 - -parity: cs8 1..2 ok 7 - -parity clears parenb and sets cs8 # Subtest: -oddp clears parenb and sets cs8 ok 1 - -oddp: -parenb ok 2 - -oddp: cs8 1..2 ok 8 - -oddp clears parenb and sets cs8 # Subtest: litout sets -parenb -istrip -opost cs8 ok 1 - litout: -parenb ok 2 - litout: -istrip ok 3 - litout: -opost ok 4 - litout: cs8 1..4 ok 9 - litout sets -parenb -istrip -opost cs8 # Subtest: -litout sets parenb istrip opost cs7 ok 1 - -litout: istrip set ok 2 - -litout: opost set ok 3 # skip pty driver does not honour parenb/cs7 ok 4 # skip pty driver does not honour parenb/cs7 1..4 ok 10 - -litout sets parenb istrip opost cs7 # Subtest: no invalid parameter warnings for new combos ok 1 - no warnings for 'evenp' ok 2 - no warnings for 'parity' ok 3 - no warnings for 'oddp' ok 4 - no warnings for '-evenp' ok 5 - no warnings for '-parity' ok 6 - no warnings for '-oddp' ok 7 - no warnings for 'cbreak' ok 8 - no warnings for '-cbreak' ok 9 - no warnings for 'litout' ok 10 - no warnings for '-litout' 1..10 ok 11 - no invalid parameter warnings for new combos 1..11 ok t/02-show-me-the-crap.t ..... 1..9 ok 1 - output contains speed line ok 2 - control chars line 1 uses hat notation ok 3 - control chars line 2 uses hat notation ok 4 - min and time values displayed ok 5 - unknown ospeed shows raw numeric value ok 6 - unknown ispeed shows raw numeric value ok 7 - known ispeed shows symbolic baud rate ok 8 - ispeed not shown when equal to ospeed ok 9 - -a output includes igncr flag ok t/02-single-arg.t ........... # Subtest: single numeric arg sets ispeed and ospeed ok 1 - no warnings from numeric baud rate arg ok 2 - ospeed set to B9600 ok 3 - ispeed set to B9600 1..3 ok 1 - single numeric arg sets ispeed and ospeed # Subtest: -g save and restore round-trip ok 1 - -g returns defined value ok 2 - -g output has 17 colon-separated fields ok 3 - echo disabled ok 4 - lflag restored to saved value 1..4 ok 2 - -g save and restore round-trip # Subtest: -a returns human-readable output ok 1 - -a returns defined value ok 2 - contains speed line ok 3 - contains echo setting 1..3 ok 3 - -a returns human-readable output # Subtest: -v returns version ok 1 - -v returns VERSION 1..1 ok 4 - -v returns version # Subtest: --version returns version ok 1 - --version returns VERSION 1..1 ok 5 - --version returns version # Subtest: version (bare) returns version ok 1 - bare version returns VERSION 1..1 ok 6 - version (bare) returns version # Subtest: speed returns output baud rate ok 1 - speed returns symbolic baud rate 1..1 ok 7 - speed returns output baud rate # Subtest: speed with unknown rate returns raw numeric ok 1 - speed returns a defined value ok 2 - speed output is a number followed by newline 1..2 ok 8 - speed with unknown rate returns raw numeric # Subtest: single flag arg (not numeric, not special) ok 1 - single -echo arg works 1..1 ok 9 - single flag arg (not numeric, not special) 1..9 ok t/99-pod-coverage.t ......... skipped: $ENV{RELEASE_TESTING} required for these tests t/99-pod.t .................. skipped: $ENV{RELEASE_TESTING} required for these tests t/baud-rates.t .............. ok 1 - use IO::Stty; ok 2 - POSIX::B0 is available on this platform ok 3 - POSIX::B50 is available on this platform ok 4 - POSIX::B75 is available on this platform ok 5 - POSIX::B110 is available on this platform ok 6 - POSIX::B134 is available on this platform ok 7 - POSIX::B150 is available on this platform ok 8 - POSIX::B200 is available on this platform ok 9 - POSIX::B300 is available on this platform ok 10 - POSIX::B600 is available on this platform ok 11 - POSIX::B1200 is available on this platform ok 12 - POSIX::B1800 is available on this platform ok 13 - POSIX::B2400 is available on this platform ok 14 - POSIX::B4800 is available on this platform ok 15 - POSIX::B9600 is available on this platform ok 16 - POSIX::B19200 is available on this platform ok 17 - POSIX::B38400 is available on this platform ok 18 - POSIX::B57600 is not available on this platform (OK — skipped gracefully) ok 19 - POSIX::B115200 is not available on this platform (OK — skipped gracefully) ok 20 - POSIX::B230400 is not available on this platform (OK — skipped gracefully) ok 21 - show_me_the_crap displays B0 as '0' ok 22 - show_me_the_crap displays B50 as '50' ok 23 - show_me_the_crap displays B75 as '75' ok 24 - show_me_the_crap displays B110 as '110' ok 25 - show_me_the_crap displays B134 as '134' ok 26 - show_me_the_crap displays B150 as '150' ok 27 - show_me_the_crap displays B200 as '200' ok 28 - show_me_the_crap displays B300 as '300' ok 29 - show_me_the_crap displays B600 as '600' ok 30 - show_me_the_crap displays B1200 as '1200' ok 31 - show_me_the_crap displays B1800 as '1800' ok 32 - show_me_the_crap displays B2400 as '2400' ok 33 - show_me_the_crap displays B4800 as '4800' ok 34 - show_me_the_crap displays B9600 as '9600' ok 35 - show_me_the_crap displays B19200 as '19200' ok 36 - show_me_the_crap displays B38400 as '38400' ok 37 - Module loaded successfully with hash-based baud rate lookup 1..37 ok All tests successful. Files=11, Tests=145, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.53 cusr 0.11 csys = 0.70 CPU) Result: PASS make[1]: Leaving directory '/build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08' create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08' dh_auto_install make -j2 install DESTDIR=/build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08/debian/libio-stty-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08' Manifying 1 pod document Installing /build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08/debian/libio-stty-perl/usr/share/perl5/IO/Stty.pm Installing /build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08/debian/libio-stty-perl/usr/share/man/man3/IO::Stty.3pm make[2]: Leaving directory '/build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08' # prevent installation of /usr/bin/stty.pl (0.03-1) rm -rf debian/libio-stty-perl/usr/bin/ make[1]: Leaving directory '/build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08' dh_install dh_installdocs dh_installchangelogs dh_installman dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libio-stty-perl' in '../libio-stty-perl_0.08-1_all.deb'. dpkg-genbuildinfo -O../libio-stty-perl_0.08-1_amd64.buildinfo dpkg-genchanges -O../libio-stty-perl_0.08-1_amd64.changes dpkg-genchanges: info: including full source code in upload dpkg-source -Zxz --after-build . dpkg-buildpackage: info: full upload (original source is included) -------------------------------------------------------------------------------- Build finished at 2026-07-09T20:29:01Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes Thu, 09 Jul 2026 20:29:01 +0000 | +------------------------------------------------------------------------------+ libio-stty-perl_0.08-1_amd64.changes: ------------------------------------- Format: 1.8 Date: Fri, 03 Apr 2026 09:50:30 -0500 Source: libio-stty-perl Binary: libio-stty-perl Architecture: source all Version: 0.08-1 Distribution: perl-5.44-throwaway Urgency: medium Maintainer: Debian Perl Group Changed-By: Samuel Young Description: libio-stty-perl - module to change/print terminal (PTY) line settings Changes: libio-stty-perl (0.08-1) unstable; urgency=medium . * Team upload. * New upstream version 0.08. * Declare compliance with Debian Policy 4.7.4. Checksums-Sha1: 36cd8114459148caac907490593e287c91d66c63 1215 libio-stty-perl_0.08-1.dsc 67aed2966a5c05306596f62684d862f46e89db4d 26588 libio-stty-perl_0.08.orig.tar.gz 6fd3e5a059e8e663e7f1e8a28f50c619114d4b03 3460 libio-stty-perl_0.08-1.debian.tar.xz 4d12c90fca87519adff237f282dffc7d970f57dc 18584 libio-stty-perl_0.08-1_all.deb f3b0092160715ca05c1159662d101731027e5176 4980 libio-stty-perl_0.08-1_amd64.buildinfo Checksums-Sha256: 5e96bc5183cce4e9381db9fc5693da8a96c00f02a3247b4173f3eba5abd0c94a 1215 libio-stty-perl_0.08-1.dsc 50043f389898cdf693f00a68e44f1f03b56da646ae72c82f6089856ff8df0439 26588 libio-stty-perl_0.08.orig.tar.gz 839135c9bbcf5269c8d74e36b322c99de3b6082bc03837451d7a46a9219157d2 3460 libio-stty-perl_0.08-1.debian.tar.xz 55ebae84f21b783bf58e5524332b8b66d210151b9f63b04f41fe2fd70a3f4561 18584 libio-stty-perl_0.08-1_all.deb 7e7e78c3a5b0abb60855060be8b415a8635662dcb7a46d9a9288de89671bb2fb 4980 libio-stty-perl_0.08-1_amd64.buildinfo Files: 8104368dc2e0ee801c2292fd08d9be83 1215 perl optional libio-stty-perl_0.08-1.dsc 40f52f4c36d01cae8c9f2bf30c619893 26588 perl optional libio-stty-perl_0.08.orig.tar.gz 93ab1df33143f9fc4cbc24364944fcca 3460 perl optional libio-stty-perl_0.08-1.debian.tar.xz ff41e156fa8adbdf83b08a6aede0bfc9 18584 perl optional libio-stty-perl_0.08-1_all.deb 99309d6f721d6b2f927d2450e193f422 4980 perl optional libio-stty-perl_0.08-1_amd64.buildinfo +------------------------------------------------------------------------------+ | Buildinfo Thu, 09 Jul 2026 20:29:01 +0000 | +------------------------------------------------------------------------------+ Format: 1.0 Source: libio-stty-perl Binary: libio-stty-perl Architecture: all source Version: 0.08-1 Checksums-Md5: 8104368dc2e0ee801c2292fd08d9be83 1215 libio-stty-perl_0.08-1.dsc ff41e156fa8adbdf83b08a6aede0bfc9 18584 libio-stty-perl_0.08-1_all.deb Checksums-Sha1: 36cd8114459148caac907490593e287c91d66c63 1215 libio-stty-perl_0.08-1.dsc 4d12c90fca87519adff237f282dffc7d970f57dc 18584 libio-stty-perl_0.08-1_all.deb Checksums-Sha256: 5e96bc5183cce4e9381db9fc5693da8a96c00f02a3247b4173f3eba5abd0c94a 1215 libio-stty-perl_0.08-1.dsc 55ebae84f21b783bf58e5524332b8b66d210151b9f63b04f41fe2fd70a3f4561 18584 libio-stty-perl_0.08-1_all.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Thu, 09 Jul 2026 20:29:00 +0000 Build-Path: /build/libio-stty-perl-cK5HIi/libio-stty-perl-0.08 Build-Tainted-By: usr-local-has-programs Installed-Build-Depends: autoconf (= 2.73-2), automake (= 1:1.18.1-4), autopoint (= 1.0-3), autotools-dev (= 20240727.1+nmu1), base-files (= 14.2), base-passwd (= 3.6.8), bash (= 5.3-3), binutils (= 2.46.50.20260617-1), binutils-common (= 2.46.50.20260617-1), binutils-x86-64-linux-gnu (= 2.46.50.20260617-1), bsdextrautils (= 2.42.2-1), build-essential (= 12.12), bzip2 (= 1.0.8-6+b2), coreutils (= 9.10-1), cpp (= 4:15.2.0-5+b1), cpp-15 (= 15.3.0-1), cpp-15-x86-64-linux-gnu (= 15.3.0-1), cpp-x86-64-linux-gnu (= 4:15.2.0-5+b1), dash (= 0.5.12-12), debconf (= 1.5.92), debhelper (= 14.3), debianutils (= 5.23.2), dh-autoreconf (= 22), dh-strip-nondeterminism (= 1.15.1-1), diffutils (= 1:3.12-1), dpkg (= 1.23.7), dpkg-dev (= 1.23.7), dwz (= 0.16-4), file (= 1:5.47-4), findutils (= 4.10.0-4), g++ (= 4:15.2.0-5+b1), g++-15 (= 15.3.0-1), g++-15-x86-64-linux-gnu (= 15.3.0-1), g++-x86-64-linux-gnu (= 4:15.2.0-5+b1), gcc (= 4:15.2.0-5+b1), gcc-15 (= 15.3.0-1), gcc-15-base (= 15.3.0-1), gcc-15-x86-64-linux-gnu (= 15.3.0-1), gcc-16-base (= 16.1.0-2), gcc-x86-64-linux-gnu (= 4:15.2.0-5+b1), gettext (= 1.0-3), gettext-base (= 1.0-3), grep (= 3.12-1), groff-base (= 1.24.1-1), gzip (= 1.13-1), hostname (= 3.25), init-system-helpers (= 1.69), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.4.0-1), libarchive-zip-perl (= 1.68-1), libasan8 (= 16.1.0-2), libatomic1 (= 16.1.0-2), libattr1 (= 1:2.6.0-1), libaudit-common (= 1:4.1.2-1), libaudit1 (= 1:4.1.2-1+b1), libbinutils (= 2.46.50.20260617-1), libblkid1 (= 2.42.2-1), libbz2-1.0 (= 1.0.8-6+b2), libc-bin (= 2.42-17), libc-dev-bin (= 2.42-17), libc-gconv-modules-extra (= 2.42-17), libc6 (= 2.42-17), libc6-dev (= 2.42-17), libcap-ng0 (= 0.9.3-1+b1), libcc1-0 (= 16.1.0-2), libcrypt1 (= 1:4.5.1-1+b1), libctf-nobfd0 (= 2.46.50.20260617-1), libctf0 (= 2.46.50.20260617-1), libdb5.3t64 (= 5.3.28+dfsg2-11+b1), libdebconfclient0 (= 0.283), libdebhelper-perl (= 14.3), libdpkg-perl (= 1.23.7), libelf1t64 (= 0.195-1), libfile-stripnondeterminism-perl (= 1.15.1-1), libgcc-15-dev (= 15.3.0-1), libgcc-s1 (= 16.1.0-2), libgdbm-compat4t64 (= 1.26-1+b2), libgdbm6t64 (= 1.26-1+b2), libgmp10 (= 2:6.3.0+dfsg-5+b2), libgomp1 (= 16.1.0-2), libgprofng0 (= 2.46.50.20260617-1), libhwasan0 (= 16.1.0-2), libio-pty-perl (= 1:1.31-1+b1), libisl23 (= 0.27-2), libitm1 (= 16.1.0-2), libjansson4 (= 2.15.1-1), liblsan0 (= 16.1.0-2), liblzma5 (= 5.8.3-1), libmagic-mgc (= 1:5.47-4), libmagic1t64 (= 1:5.47-4), libmd0 (= 1.2.0-2), libmount1 (= 2.42.2-1), libmpc3 (= 1.3.1-3), libmpfr6 (= 4.2.2-3), libpam-modules (= 1.7.0-8), libpam-modules-bin (= 1.7.0-8), libpam-runtime (= 1.7.0-8), libpam0g (= 1.7.0-8), libpcre2-8-0 (= 10.46-1+b2), libperl5.44 (= 5.44.0~rc2-1), libpipeline1 (= 1.5.8-3), libquadmath0 (= 16.1.0-2), libseccomp2 (= 2.6.0-2+b1), libselinux1 (= 3.10-1), libsframe3 (= 2.46.50.20260617-1), libsmartcols1 (= 2.42.2-1), libssl3t64 (= 3.6.3-1), libstdc++-15-dev (= 15.3.0-1), libstdc++6 (= 16.1.0-2), libsystemd0 (= 261.1-2), libtinfo6 (= 6.6+20260608-2), libtool (= 2.5.4-11), libtsan2 (= 16.1.0-2), libubsan1 (= 16.1.0-2), libuchardet0 (= 0.0.8-2+b2), libudev1 (= 261.1-2), libunistring5 (= 1.4.2-1), libuuid1 (= 2.42.2-1), libxml2-16 (= 2.15.3+dfsg-1), libzstd1 (= 1.5.7+dfsg-3+b2), linux-libc-dev (= 7.1.3-1), m4 (= 1.4.21-1), make (= 4.4.1-3), man-db (= 2.13.1-1), mawk (= 1.3.4.20260302-1), ncurses-base (= 6.6+20260608-2), ncurses-bin (= 6.6+20260608-2), openssl-provider-legacy (= 3.6.3-1), patch (= 2.8-2), perl (= 5.44.0~rc2-1), perl-base (= 5.44.0~rc2-1), perl-modules-5.44 (= 5.44.0~rc2-1), po-debconf (= 1.0.22), rpcsvc-proto (= 1.4.4-1), sed (= 4.9-3), sensible-utils (= 0.0.26), sysvinit-utils (= 3.18-1), tar (= 1.35+dfsg-4), util-linux (= 2.42.2-1), xz-utils (= 5.8.3-1), zlib1g (= 1:1.3.dfsg+really1.3.2-3) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LANGUAGE="en_GB:en" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" LD_PRELOAD="libeatmydata.so" SOURCE_DATE_EPOCH="1775227830" +------------------------------------------------------------------------------+ | Package contents Thu, 09 Jul 2026 20:29:01 +0000 | +------------------------------------------------------------------------------+ libio-stty-perl_0.08-1_all.deb ------------------------------ new Debian package, version 2.0. size 18584 bytes: control archive=888 bytes. 605 bytes, 16 lines control 504 bytes, 7 lines md5sums Package: libio-stty-perl Version: 0.08-1 Architecture: all Maintainer: Debian Perl Group Installed-Size: 55 Depends: perl:any Section: perl Priority: optional Multi-Arch: foreign Homepage: https://metacpan.org/release/IO-Stty Description: module to change/print terminal (PTY) line settings The IO::Stty module provides a generic interface to handle pseudoterminals (PTY) in Perl scripts, such as in the "expect" library. . Before changing terminal parameters with IO::Stty, it's recommended to save the current settings and restore them when finished. drwxr-xr-x root/root 0 2026-04-03 14:50 ./ drwxr-xr-x root/root 0 2026-04-03 14:50 ./usr/ drwxr-xr-x root/root 0 2026-04-03 14:50 ./usr/share/ drwxr-xr-x root/root 0 2026-04-03 14:50 ./usr/share/doc/ drwxr-xr-x root/root 0 2026-04-03 14:50 ./usr/share/doc/libio-stty-perl/ -rw-r--r-- root/root 498 2026-04-03 14:50 ./usr/share/doc/libio-stty-perl/changelog.Debian.gz -rw-r--r-- root/root 3002 2026-04-02 22:35 ./usr/share/doc/libio-stty-perl/changelog.gz -rw-r--r-- root/root 1259 2026-04-03 14:50 ./usr/share/doc/libio-stty-perl/copyright drwxr-xr-x root/root 0 2026-04-03 14:50 ./usr/share/lintian/ drwxr-xr-x root/root 0 2026-04-03 14:50 ./usr/share/lintian/overrides/ -rw-r--r-- root/root 181 2026-04-03 14:50 ./usr/share/lintian/overrides/libio-stty-perl drwxr-xr-x root/root 0 2026-04-03 14:50 ./usr/share/man/ drwxr-xr-x root/root 0 2026-04-03 14:50 ./usr/share/man/man3/ -rw-r--r-- root/root 4823 2026-04-03 14:50 ./usr/share/man/man3/IO::Stty.3pm.gz drwxr-xr-x root/root 0 2026-04-03 14:50 ./usr/share/perl5/ drwxr-xr-x root/root 0 2026-04-03 14:50 ./usr/share/perl5/IO/ -rw-r--r-- root/root 30427 2026-04-02 22:01 ./usr/share/perl5/IO/Stty.pm -rwxr-xr-x root/root 245 2026-03-22 21:24 ./usr/share/perl5/IO/stty.pl +------------------------------------------------------------------------------+ | Post Build Thu, 09 Jul 2026 20:29:01 +0000 | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup Thu, 09 Jul 2026 20:29:01 +0000 | +------------------------------------------------------------------------------+ Purging /build/libio-stty-perl-cK5HIi Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary Thu, 09 Jul 2026 20:29:02 +0000 | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 616 Build-Time: 4 Distribution: perl-5.44-throwaway Host Architecture: amd64 Install-Time: 4 Job: /srv/debomatic/incoming/libio-stty-perl_0.08-1.dsc Machine Architecture: amd64 Package: libio-stty-perl Package-Time: 16 Source-Version: 0.08-1 Space: 616 Status: successful Version: 0.08-1 -------------------------------------------------------------------------------- Finished at 2026-07-09T20:29:01Z Build needed 00:00:16, 616k disk space