sbuild (Debian sbuild) 0.91.10 (27 June 2026) on carme.larted.org.uk +==============================================================================+ | debhelper 14.5 (amd64) Sat, 19 Sep 2026 13:22:10 +0000 | +==============================================================================+ Package: debhelper Version: 14.5 Source Version: 14.5 Distribution: perl-5.44-throwaway Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: Setting up the chroot... I: Creating chroot session... I: Setting up log color... +------------------------------------------------------------------------------+ | Chroot Setup Commands Sat, 19 Sep 2026 13:22:11 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup debhelper_14.5 perl-5.44-throwaway amd64 --------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup debhelper_14.5 perl-5.44-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: Setting up apt archive... +------------------------------------------------------------------------------+ | Update chroot Sat, 19 Sep 2026 13:22:11 +0000 | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.44 InRelease [3042 B] Get:1 file:/srv/reprepro perl-5.44 InRelease [3042 B] Hit:2 http://deb.debian.org/debian unstable InRelease Hit:3 http://deb.debian.org/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files Sat, 19 Sep 2026 13:22:17 +0000 | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/debhelper_14.5.dsc exists in /srv/debomatic/incoming; copying to chroot +------------------------------------------------------------------------------+ | Install package build dependencies Sat, 19 Sep 2026 13:22:17 +0000 | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: dpkg-dev (>= 1.18.0~), perl:any, po4a, shellcheck, build-essential Filtered Build-Depends: dpkg-dev (>= 1.18.0~), perl:any, po4a, shellcheck, build-essential dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/build/debhelper-efh5fU/resolver-rhsSMn/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/build/debhelper-efh5fU/resolver-rhsSMn/apt_archive ./ InRelease Get:2 copy:/build/debhelper-efh5fU/resolver-rhsSMn/apt_archive ./ Release [609 B] Ign:3 copy:/build/debhelper-efh5fU/resolver-rhsSMn/apt_archive ./ Release.gpg Get:4 copy:/build/debhelper-efh5fU/resolver-rhsSMn/apt_archive ./ Sources [724 B] Get:5 copy:/build/debhelper-efh5fU/resolver-rhsSMn/apt_archive ./ Packages [665 B] Fetched 1998 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: gettext gettext-base libclass-inspector-perl libfile-sharedir-perl libnuma1 libosp5 libpod-parser-perl libsgmls-perl libsyntax-keyword-try-perl libxml2-16 libxs-parse-keyword-perl libyaml-tiny-perl opensp po4a sgml-base shellcheck Suggested packages: autopoint gettext-doc libasprintf-dev libgettextpo-dev gnulib-l10n sgmlspl sgmls-doc doc-base sgml-data sgml-base-doc Recommended packages: curl | wget | lynx python3:any python3-requests liblocale-gettext-perl libterm-readkey-perl libtext-wrapi18n-perl libunicode-linebreak-perl The following NEW packages will be installed: gettext gettext-base libclass-inspector-perl libfile-sharedir-perl libnuma1 libosp5 libpod-parser-perl libsgmls-perl libsyntax-keyword-try-perl libxml2-16 libxs-parse-keyword-perl libyaml-tiny-perl opensp po4a sbuild-build-depends-main-dummy sgml-base shellcheck 0 upgraded, 17 newly installed, 0 to remove and 0 not upgraded. Need to get 11.1 MB/11.2 MB of archives. After this operation, 56.9 MB of additional disk space will be used. Get:1 file:/srv/reprepro perl-5.44/main amd64 libxs-parse-keyword-perl amd64 0.49-1+b2 [66.4 kB] Get:2 copy:/build/debhelper-efh5fU/resolver-rhsSMn/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [876 B] Get:3 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 1.0-5 [334 kB] Get:4 file:/srv/reprepro perl-5.44/main amd64 libsyntax-keyword-try-perl amd64 0.31-1+b2 [27.2 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.15.4+dfsg-1 [683 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 gettext amd64 1.0-5 [2704 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 libclass-inspector-perl all 1.36-3 [17.5 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 libfile-sharedir-perl all 1.118-3 [16.0 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 libnuma1 amd64 2.0.19-1+b2 [22.0 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 libosp5 amd64 1.5.2-15.2 [972 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 libpod-parser-perl all 1.67-1 [94.1 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 libsgmls-perl all 1.03ii-38 [23.7 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 libyaml-tiny-perl all 1.76-1 [29.8 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 sgml-base all 1.31+nmu1 [10.9 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 opensp amd64 1.5.2-15.2 [448 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 po4a all 0.74-3 [2638 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 shellcheck amd64 0.11.0-2+b1 [3076 kB] Fetched 11.1 MB in 0s (123 MB/s) Selecting previously unselected package gettext-base. (Reading database ... 15722 files and directories currently installed.) Preparing to unpack .../00-gettext-base_1.0-5_amd64.deb ... Unpacking gettext-base (1.0-5) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../01-libxml2-16_2.15.4+dfsg-1_amd64.deb ... Unpacking libxml2-16:amd64 (2.15.4+dfsg-1) ... Selecting previously unselected package gettext. Preparing to unpack .../02-gettext_1.0-5_amd64.deb ... Unpacking gettext (1.0-5) ... Selecting previously unselected package libclass-inspector-perl. Preparing to unpack .../03-libclass-inspector-perl_1.36-3_all.deb ... Unpacking libclass-inspector-perl (1.36-3) ... Selecting previously unselected package libfile-sharedir-perl. Preparing to unpack .../04-libfile-sharedir-perl_1.118-3_all.deb ... Unpacking libfile-sharedir-perl (1.118-3) ... Selecting previously unselected package libnuma1:amd64. Preparing to unpack .../05-libnuma1_2.0.19-1+b2_amd64.deb ... Unpacking libnuma1:amd64 (2.0.19-1+b2) ... Selecting previously unselected package libosp5. Preparing to unpack .../06-libosp5_1.5.2-15.2_amd64.deb ... Unpacking libosp5 (1.5.2-15.2) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../07-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libsgmls-perl. Preparing to unpack .../08-libsgmls-perl_1.03ii-38_all.deb ... Unpacking libsgmls-perl (1.03ii-38) ... Selecting previously unselected package libxs-parse-keyword-perl. Preparing to unpack .../09-libxs-parse-keyword-perl_0.49-1+b2_amd64.deb ... Unpacking libxs-parse-keyword-perl (0.49-1+b2) ... Selecting previously unselected package libsyntax-keyword-try-perl. Preparing to unpack .../10-libsyntax-keyword-try-perl_0.31-1+b2_amd64.deb ... Unpacking libsyntax-keyword-try-perl (0.31-1+b2) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../11-libyaml-tiny-perl_1.76-1_all.deb ... Unpacking libyaml-tiny-perl (1.76-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../12-sgml-base_1.31+nmu1_all.deb ... Unpacking sgml-base (1.31+nmu1) ... Selecting previously unselected package opensp. Preparing to unpack .../13-opensp_1.5.2-15.2_amd64.deb ... Unpacking opensp (1.5.2-15.2) ... Selecting previously unselected package po4a. Preparing to unpack .../14-po4a_0.74-3_all.deb ... Unpacking po4a (0.74-3) ... Selecting previously unselected package shellcheck. Preparing to unpack .../15-shellcheck_0.11.0-2+b1_amd64.deb ... Unpacking shellcheck (0.11.0-2+b1) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../16-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libsgmls-perl (1.03ii-38) ... Setting up libclass-inspector-perl (1.36-3) ... Setting up libxml2-16:amd64 (2.15.4+dfsg-1) ... Setting up gettext-base (1.0-5) ... Setting up libyaml-tiny-perl (1.76-1) ... Setting up libosp5 (1.5.2-15.2) ... Setting up libpod-parser-perl (1.67-1) ... Setting up libnuma1:amd64 (2.0.19-1+b2) ... Setting up libfile-sharedir-perl (1.118-3) ... Setting up sgml-base (1.31+nmu1) ... Setting up gettext (1.0-5) ... Setting up opensp (1.5.2-15.2) ... Setting up shellcheck (0.11.0-2+b1) ... Setting up libxs-parse-keyword-perl (0.49-1+b2) ... Setting up libsyntax-keyword-try-perl (0.31-1+b2) ... Setting up po4a (0.74-3) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.43-5) ... +------------------------------------------------------------------------------+ | Check architectures Sat, 19 Sep 2026 13:22:20 +0000 | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Build environment Sat, 19 Sep 2026 13:22:21 +0000 | +------------------------------------------------------------------------------+ Kernel: Linux 7.0.10+deb14-amd64 #1 SMP PREEMPT_DYNAMIC Debian 7.0.10-1 (2026-05-27) amd64 (x86_64) Toolchain package versions: binutils_2.47-6 dpkg-dev_1.23.11 g++-15_15.3.0-4 g++-16_16.2.0-3 gcc-15_15.3.0-4 gcc-16_16.2.0-3 libc6-dev_2.43-5 libstdc++-15-dev_15.3.0-4 libstdc++-16-dev_16.2.0-3 libstdc++6_16.2.0-3 linux-libc-dev_7.2.6-1 Package versions: apt_3.3.3 base-files_14.2 base-passwd_3.6.8 bash_5.3-4 binutils_2.47-6 binutils-common_2.47-6 binutils-x86-64-linux-gnu_2.47-6 build-essential_12.12 bzip2_1.0.8-6+b2 coreutils_9.10-1 cpp_4:16.1.0-3 cpp-15_15.3.0-4 cpp-15-x86-64-linux-gnu_15.3.0-4 cpp-16_16.2.0-3 cpp-16-x86-64-linux-gnu_16.2.0-3 cpp-x86-64-linux-gnu_4:16.1.0-3 dash_0.5.12-12 debconf_1.5.92 debian-archive-keyring_2025.1 debianutils_5.24 diffutils_1:3.12-1 dirmngr_2.4.9-7+b1 dpkg_1.23.11 dpkg-dev_1.23.11 eatmydata_131-2 findutils_4.11.0-2 g++_4:16.1.0-3 g++-15_15.3.0-4 g++-15-x86-64-linux-gnu_15.3.0-4 g++-16_16.2.0-3 g++-16-x86-64-linux-gnu_16.2.0-3 g++-x86-64-linux-gnu_4:16.1.0-3 gcc_4:16.1.0-3 gcc-15_15.3.0-4 gcc-15-base_15.3.0-4 gcc-15-x86-64-linux-gnu_15.3.0-4 gcc-16_16.2.0-3 gcc-16-base_16.2.0-3 gcc-16-x86-64-linux-gnu_16.2.0-3 gcc-x86-64-linux-gnu_4:16.1.0-3 gettext_1.0-5 gettext-base_1.0-5 gnupg_2.4.9-7 gnupg-l10n_2.4.9-7 gpg_2.4.9-7+b1 gpg-agent_2.4.9-7+b1 gpgconf_2.4.9-7+b1 gpgsm_2.4.9-7+b1 grep_3.12-1 gzip_1.14-1 hostname_3.25 init-system-helpers_1.69+nmu1 libacl1_2.4.0-1 libapt-pkg7.0_3.3.3 libasan8_16.2.0-3 libassuan9_3.0.2-2+b2 libatomic1_16.2.0-3 libattr1_1:2.6.0-1 libaudit-common_1:4.1.2-1 libaudit1_1:4.1.2-1+b2 libbinutils_2.47-6 libblkid1_2.42.3-1 libbz2-1.0_1.0.8-6+b2 libc-bin_2.43-5 libc-dev-bin_2.43-5 libc-gconv-modules-extra_2.43-5 libc6_2.43-5 libc6-dev_2.43-5 libcap-ng0_0.9.6-1 libcc1-0_16.2.0-3 libclass-inspector-perl_1.36-3 libcrypt1_1:4.5.2+20251210-1 libctf-nobfd0_2.47-6 libctf0_2.47-6 libdb5.3t64_5.3.28+dfsg2-11+b1 libdebconfclient0_0.283 libdpkg-perl_1.23.11 libeatmydata1_131-2+b2 libffi8_3.8.0-2 libfile-sharedir-perl_1.118-3 libgcc-15-dev_15.3.0-4 libgcc-16-dev_16.2.0-3 libgcc-s1_16.2.0-3 libgcrypt20_1.12.3-2 libgdbm-compat4t64_1.26-1+b2 libgdbm6t64_1.26-1+b2 libgmp10_2:6.3.0+dfsg-5+b2 libgnutls30t64_3.8.13-1 libgomp1_16.2.0-3 libgpg-error0_1.61-5 libgprofng0_2.47-6 libhogweed6t64_3.10.2-1+b1 libhwasan0_16.2.0-3 libidn2-0_2.3.8-5 libisl23_0.28-1 libitm1_16.2.0-3 libjansson4_2.15.1-1 libksba8_1.8.1-1 libldap2_2.6.14+dfsg-2+b1 liblsan0_16.2.0-3 liblz4-1_1.10.0-10 liblzma5_5.8.4-1 libmd0_1.2.0-2 libmount1_2.42.3-1 libmpc3_1.3.1-3 libmpfr6_4.2.2-3 libncursesw6_6.6+20260608-2 libnettle8t64_3.10.2-1+b1 libnpth0t64_1.8-4 libnuma1_2.0.19-1+b2 libosp5_1.5.2-15.2 libp11-kit0_0.26.5-1 libpam-modules_1.7.0-8 libpam-modules-bin_1.7.0-8 libpam-runtime_1.7.0-8 libpam0g_1.7.0-8 libpcre2-8-0_10.48-3 libperl5.40_5.40.1-8 libperl5.44_5.44.0-1 libpod-parser-perl_1.67-1 libquadmath0_16.2.0-3 libreadline8t64_8.3-4 libsasl2-2_2.1.28+dfsg1-11 libsasl2-modules-db_2.1.28+dfsg1-11 libseccomp2_2.6.1-1+b1 libselinux1_3.11-2 libsframe3_2.47-6 libsgmls-perl_1.03ii-38 libsmartcols1_2.42.3-1 libsqlite3-0_3.53.4-2 libssl3t64_3.6.4-1 libstdc++-15-dev_15.3.0-4 libstdc++-16-dev_16.2.0-3 libstdc++6_16.2.0-3 libsyntax-keyword-try-perl_0.31-1+b2 libsystemd0_262~rc3-1 libtasn1-6_4.21.0-2+b1 libtinfo6_6.6+20260608-2 libtsan2_16.2.0-3 libtss2-mu-4.0.1-0t64_4.1.3-7 libtss2-rc0t64_4.1.3-7 libtss2-sys1t64_4.1.3-7 libtss2-tcti-device0t64_4.1.3-7 libtss2-tcti-mssim0t64_4.1.3-7 libtss2-tcti-swtpm0t64_4.1.3-7 libubsan1_16.2.0-3 libudev1_262~rc3-1 libunistring5_1.4.2-1 libuuid1_2.42.3-1 libxml2-16_2.15.4+dfsg-1 libxs-parse-keyword-perl_0.49-1+b2 libxxhash0_0.8.3-2+b2 libyaml-tiny-perl_1.76-1 libzstd1_1.5.7+dfsg-4 linux-libc-dev_7.2.6-1 make_4.4.1-3 mawk_1.3.4.20260302-1 mount_2.42.3-1 ncurses-base_6.6+20260608-2 ncurses-bin_6.6+20260608-2 opensp_1.5.2-15.2 openssl-provider-legacy_3.6.4-1 patch_2.8-2 perl_5.44.0-1 perl-base_5.44.0-1 perl-modules-5.40_5.40.1-8 perl-modules-5.44_5.44.0-1 pinentry-curses_1.3.3-3 po4a_0.74-3 readline-common_8.3-4 rpcsvc-proto_1.4.4-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-3 sgml-base_1.31+nmu1 shellcheck_0.11.0-2+b1 sqv_1.5.0-1 sysvinit-utils_3.18-1 tar_1.35+dfsg-6 util-linux_2.42.3-1 xz-utils_5.8.4-1 zlib1g_1:1.3.dfsg+really1.3.2-3 +------------------------------------------------------------------------------+ | Build Sat, 19 Sep 2026 13:22:21 +0000 | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (native) Source: debhelper Binary: debhelper, libdebhelper-perl Architecture: all Version: 14.5 Maintainer: Debhelper Maintainers Uploaders: Niels Thykier Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/debian/debhelper Vcs-Git: https://salsa.debian.org/debian/debhelper.git Testsuite: autopkgtest-pkg-perl Build-Depends: dpkg-dev (>= 1.18.0~), libtest-pod-perl , man-db , perl:any, po4a , shellcheck Package-List: debhelper deb devel optional arch=all libdebhelper-perl deb perl optional arch=all Checksums-Sha1: 0fd5878323c5bb2f2782441fd01f4e2eda2afd9c 645316 debhelper_14.5.tar.xz Checksums-Sha256: a338279dd8f28754e9df70071efb45021fd1331bc42e9adc883fa8ec61949351 645316 debhelper_14.5.tar.xz Files: 23700afbe6793f765ff49db65981e8a1 645316 debhelper_14.5.tar.xz Dgit: 4fbbe7cd9a91e8389b16f591b2bbebb9b1346f58 debian archive/debian/14.5 https://git.dgit.debian.org/debhelper Git-Tag-Info: tag=97208e86db9ea822573491abe91efc08af930f4e fp=f5e7199aef5e5c67e555873f740d68888365d289 Git-Tag-Tagger: Niels Thykier -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEN02M5NuW6cvUwJcqYG0ITkaDwHkFAmqsFUEACgkQYG0ITkaD wHmZtw/+LtLrxMHYAarKkp/Kyw3Jnso3FJOQRZUrkXbBRDny94DEKUSQM8/9fuR7 0KQiyqFnum4byeWq98nyoPzziOeEu/tQKJj/CqQ+IO+D4J4azM+DfEtlULJAuNlm UEPdTATZ+3rRr2HVJucZ+HtdPEZholZs13HdumRZQ2sPnW8juPLCNYgyABTMXugY +iKQpN92pkEUWQmLRpeGKI40BbVSGYVSK77vE04CpUUY7JBqnCXYr2ZZW0hbR8rk yKLKZxH/EtZtVCgvUgqmEKSJ9A/a6KaKLfJkyGg2EVEi1AEZYHT6jQ1jImwxFjxc /ix+fHXiNjLWYWg5RByAGejQFvVdObEMh2ZhrqAvreeaL9EHbrOP97wveL9m3VtZ 6REI21fiHRC8LagVrSMBoCAuibLbTWfTD1Bhd+3kARGH7+9Qy5zNq0FPm7eI7NPZ SDYIZI8uSIX6OVMubSM1KSB8WxPsHnZZiWiB0lAgqeBE93zrn4x/ol+n6eqDIl8v YCAdnkvef91vcOFG77C6kOvc0a6sUvXsYz5P7DYYRIBrM4TIkJRWH1yoUSnJfDOu Q0MBFyGIHzKSsiEI0GvdQgDlEprvvJybHEJwIi1/N9L6o8nEJumDslEXRSDFPzqD CyVriBDF3uf/SSx4UPm+JKP0lRGpY34vU+OhLSCRTjxWTBJ3UUk= =iJw+ -----END PGP SIGNATURE----- dpkg-source: warning: cannot verify inline signature for ./debhelper_14.5.dsc: missing OpenPGP keyrings dpkg-source: info: verifying ./debhelper_14.5.dsc dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-keyring.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-tag2upload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-nonupload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-maintainers.pgp dpkg-source: info: extracting debhelper in /build/debhelper-efh5fU/debhelper-14.5 dpkg-source: info: unpacking debhelper_14.5.tar.xz clean up apt cache ------------------ Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Time Build Commands Sat, 19 Sep 2026 13:22:21 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network debhelper_14.5 perl-5.44-throwaway amd64 --------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network debhelper_14.5 perl-5.44-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/build/debhelper-efh5fU/debhelper-14.5 SCHROOT_ALIAS_NAME=perl-5.44-throwaway-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.44-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.44-amd64-debomatic-0be27fb5-f0b9-4731-82a6-55f131f4fecb SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc dpkg-buildpackage: info: source package debhelper dpkg-buildpackage: info: source version 14.5 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Niels Thykier dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean ./run dh clean --without autoreconf --with build-stamp dh_auto_clean make -j2 clean make[1]: Entering directory '/build/debhelper-efh5fU/debhelper-14.5' rm -f *-stamp *.1 *.7 lib/Debian/Debhelper/Dh_Version.pm po4a --previous --rm-translations --rm-backups man/po4a/po4a.cfg po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! (1448 entries) for lang in de es fr ja pt; do \ if [ -e man/$lang ]; then rmdir man/$lang; fi; \ done; make[1]: Leaving directory '/build/debhelper-efh5fU/debhelper-14.5' dh_clean dpkg-source -b . dpkg-source: info: using source format '3.0 (native)' dpkg-source: info: building debhelper in ../debhelper_14.5.tar.xz dpkg-source: info: building debhelper in ../debhelper_14.5.dsc debian/rules binary ./run dh binary --without autoreconf --with build-stamp dh_auto_configure dh_auto_build make -j2 INSTALL="install --strip-program=true" make[1]: Entering directory '/build/debhelper-efh5fU/debhelper-14.5' po4a --previous -L UTF-8 man/po4a/po4a.cfg printf "package Debian::Debhelper::Dh_Version;\n\$version='14.5';\n1" > \ lib/Debian/Debhelper/Dh_Version.pm cat debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{14.5}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' dh_assistant dh_auto_build dh_auto_clean dh_auto_configure dh_auto_install dh_auto_test dh_bugfiles dh_builddeb dh_clean dh_compress dh_computeautosubstvars dh_dwz dh_fixperms dh_gencontrol dh_icons dh_install dh_installalternatives dh_installcatalogs dh_installchangelogs dh_installcron dh_installdeb dh_installdebconf dh_installdirs dh_installdocs dh_installemacsen dh_installexamples dh_installgsettings dh_installifupdown dh_installinfo dh_installinit dh_installinitramfs dh_installlogcheck dh_installlogrotate dh_installman dh_installmanpages dh_installmenu dh_installmime dh_installmodules dh_installpam dh_installppp dh_installsystemd dh_installsystemduser dh_installsysusers dh_installtmpfiles dh_installudev dh_installwm dh_installxfonts dh_link dh_lintian dh_listpackages dh_makeshlibs dh_md5sums dh_missing dh_movefiles dh_movetousr dh_perl dh_prep dh_shlibdeps dh_strip dh_systemd_enable dh_systemd_start dh_testdir dh_testroot dh_ucf dh_update_autotools_config dh_usrlocal | \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 > debhelper.7 pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.7 pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 debhelper-obsolete-compat.pod > debhelper-obsolete-compat.7 pod2man --utf8 -c Debhelper -r "14.5" dh_assistant dh_assistant.1 pod2man --utf8 -c Debhelper -r "14.5" dh_auto_build dh_auto_build.1 pod2man --utf8 -c Debhelper -r "14.5" dh_auto_clean dh_auto_clean.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/debhelper.pod is 96.42% translated (270 of 280 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_auto_configure dh_auto_configure.1 man/de/debhelper-compat-upgrade-checklist.pod is 93.44% translated (328 of 351 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_auto_install dh_auto_install.1 man/de/debhelper-obsolete-compat.pod is 100% translated (70 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh.pod is 93.15% translated (136 of 146 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_auto_build.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_auto_test dh_auto_test.1 man/de/dh_auto_clean.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_auto_configure.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_auto_install.pod is 100% translated (21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_auto_test.pod is 100% translated (18 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_bugfiles.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_builddeb.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_clean.pod is 100% translated (29 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_compress.pod is 100% translated (25 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_bugfiles dh_bugfiles.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_dwz.pod is 100% translated (25 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_fixperms.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_gencontrol.pod is 100% translated (18 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_icons.pod is 100% translated (15 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_builddeb dh_builddeb.1 man/de/dh_install.pod is 100% translated (50 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installcatalogs.pod is 100% translated (23 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installchangelogs.pod is 100% translated (33 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installcron.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installdeb.pod is 98.41% translated (62 of 63 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_clean dh_clean.1 man/de/dh_installdebconf.pod is 100% translated (53 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installdirs.pod is 100% translated (28 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installdocs.pod is 90.32% translated (56 of 62 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installemacsen.pod is 100% translated (30 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_compress dh_compress.1 man/de/dh_installexamples.pod is 97.05% translated (33 of 34 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installifupdown.pod is 100% translated (20 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installinfo.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installinit.pod is 98.46% translated (64 of 65 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installinitramfs.pod is 100% translated (21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installlogcheck.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installlogrotate.pod is 100% translated (14 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installman.pod is 100% translated (38 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installmanpages.pod is 100% translated (22 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_computeautosubstvars dh_computeautosubstvars.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installmenu.pod is 100% translated (20 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installmime.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installmodules.pod is 95.45% translated (21 of 22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installpam.pod is 88.23% translated (15 of 17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installppp.pod is 100% translated (19 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installudev.pod is 100% translated (21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installwm.pod is 100% translated (26 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_dwz dh_dwz.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_installxfonts.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_link.pod is 100% translated (36 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_lintian.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_listpackages.pod is 100% translated (12 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_makeshlibs.pod is 100% translated (61 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_md5sums.pod is 100% translated (16 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_fixperms dh_fixperms.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_movefiles.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_perl.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_prep.pod is 100% translated (15 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_shlibdeps.pod is 100% translated (32 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_strip.pod is 100% translated (43 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_testdir.pod is 100% translated (14 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_testroot.pod is 100% translated (21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_usrlocal.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_gencontrol dh_gencontrol.1 man/de/dh_systemd_enable.pod is 100% translated (37 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/dh_systemd_start.pod is 100% translated (25 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/de/strings-kept-translations.pod is 100% translated (2 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_icons dh_icons.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_install dh_install.1 Discard man/es/debhelper.pod (93 of 280 strings; only 33.21% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installalternatives dh_installalternatives.1 Discard man/es/debhelper-compat-upgrade-checklist.pod (145 of 351 strings; only 41.31% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/debhelper-obsolete-compat.pod is 85.71% translated (60 of 70 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installcatalogs dh_installcatalogs.1 Discard man/es/dh.pod (58 of 146 strings; only 39.72% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_auto_build.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_auto_clean.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_auto_configure.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_auto_install.pod is 90.47% translated (19 of 21 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installchangelogs dh_installchangelogs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_auto_test.pod is 100% translated (18 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_bugfiles.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_builddeb.pod is 86.36% translated (19 of 22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_clean.pod (19 of 29 strings; only 65.51% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_compress.pod is 100% translated (25 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installcron dh_installcron.1 Discard man/es/dh_dwz.pod (12 of 25 strings; only 48% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_fixperms.pod is 87.5% translated (14 of 16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_gencontrol.pod is 88.88% translated (16 of 18 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_icons.pod is 80% translated (12 of 15 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_install.pod (28 of 50 strings; only 56% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installcatalogs.pod is 86.95% translated (20 of 23 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installdeb dh_installdeb.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installchangelogs.pod (25 of 33 strings; only 75.75% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installcron.pod is 95.45% translated (21 of 22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installdeb.pod (23 of 63 strings; only 36.5% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installdebconf.pod (28 of 53 strings; only 52.83% translated; need 80%). pod2man --utf8 -c Debhelper -r "14.5" dh_installdebconf dh_installdebconf.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installdirs.pod (19 of 28 strings; only 67.85% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installdocs.pod (43 of 62 strings; only 69.35% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installemacsen.pod is 86.66% translated (26 of 30 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installexamples.pod (24 of 34 strings; only 70.58% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installifupdown.pod is 100% translated (20 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installdirs dh_installdirs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installinfo.pod is 83.33% translated (20 of 24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installinit.pod (38 of 65 strings; only 58.46% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installinitramfs.pod (10 of 21 strings; only 47.61% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installlogcheck.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installlogrotate.pod is 100% translated (14 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installdocs dh_installdocs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installman.pod (28 of 38 strings; only 73.68% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installmanpages.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installmenu.pod is 100% translated (20 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installmime.pod is 93.75% translated (15 of 16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installmodules.pod is 90.9% translated (20 of 22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installpam.pod is 88.23% translated (15 of 17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installemacsen dh_installemacsen.1 man/es/dh_installppp.pod is 100% translated (19 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installudev.pod is 90.47% translated (19 of 21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installwm.pod is 88.46% translated (23 of 26 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_installxfonts.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_link.pod (28 of 36 strings; only 77.77% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_lintian.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_listpackages.pod is 91.66% translated (11 of 12 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_makeshlibs.pod (32 of 61 strings; only 52.45% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_md5sums.pod is 93.75% translated (15 of 16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_movefiles.pod is 95.83% translated (23 of 24 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installexamples dh_installexamples.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_perl.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_prep.pod is 100% translated (15 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_shlibdeps.pod is 90.62% translated (29 of 32 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_strip.pod (23 of 43 strings; only 53.48% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_testdir.pod is 100% translated (14 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_testroot.pod (12 of 21 strings; only 57.14% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/es/dh_usrlocal.pod is 86.36% translated (19 of 22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_systemd_enable.pod (9 of 37 strings; only 24.32% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_systemd_start.pod (11 of 25 strings; only 44% translated; need 80%). pod2man --utf8 -c Debhelper -r "14.5" dh_installgsettings dh_installgsettings.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/strings-kept-translations.pod (0 of 2 strings; only 0% translated; need 80%). pod2man --utf8 -c Debhelper -r "14.5" dh_installifupdown dh_installifupdown.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installinfo dh_installinfo.1 man/fr/debhelper.pod is 96.42% translated (270 of 280 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installinit dh_installinit.1 man/fr/debhelper-compat-upgrade-checklist.pod is 86.6% translated (304 of 351 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/debhelper-obsolete-compat.pod is 100% translated (70 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh.pod is 93.15% translated (136 of 146 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_auto_build.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_auto_clean.pod is 100% translated (16 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installinitramfs dh_installinitramfs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_auto_configure.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_auto_install.pod is 95.23% translated (20 of 21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_auto_test.pod is 100% translated (18 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_bugfiles.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_builddeb.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_clean.pod is 100% translated (29 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installlogcheck dh_installlogcheck.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_compress.pod is 100% translated (25 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_dwz.pod is 100% translated (25 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_fixperms.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_gencontrol.pod is 100% translated (18 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_icons.pod is 100% translated (15 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installlogrotate dh_installlogrotate.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_install.pod is 100% translated (50 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installcatalogs.pod is 100% translated (23 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installchangelogs.pod is 96.96% translated (32 of 33 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installcron.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installdeb.pod is 98.41% translated (62 of 63 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installdebconf.pod is 100% translated (53 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installman dh_installman.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installdirs.pod is 100% translated (28 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installdocs.pod is 91.93% translated (57 of 62 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installemacsen.pod is 100% translated (30 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installexamples.pod is 97.05% translated (33 of 34 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installifupdown.pod is 100% translated (20 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installinfo.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installinit.pod is 98.46% translated (64 of 65 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installinitramfs.pod is 100% translated (21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installlogcheck.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installlogrotate.pod is 100% translated (14 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installmanpages dh_installmanpages.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installman.pod is 100% translated (38 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installmanpages.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installmenu.pod is 100% translated (20 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installmime.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installmodules.pod is 95.45% translated (21 of 22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installpam.pod is 88.23% translated (15 of 17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installppp.pod is 100% translated (19 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installudev.pod is 100% translated (21 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installmenu dh_installmenu.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installwm.pod is 100% translated (26 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_installxfonts.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_link.pod is 100% translated (36 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_lintian.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_listpackages.pod is 100% translated (12 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_makeshlibs.pod is 100% translated (61 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_md5sums.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_movefiles.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installmime dh_installmime.1 man/fr/dh_perl.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_prep.pod is 100% translated (15 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_shlibdeps.pod is 100% translated (32 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_strip.pod is 100% translated (43 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_testdir.pod is 100% translated (14 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_testroot.pod is 100% translated (21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_usrlocal.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/dh_systemd_enable.pod is 100% translated (37 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installmodules dh_installmodules.1 man/fr/dh_systemd_start.pod is 100% translated (25 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/fr/strings-kept-translations.pod is 100% translated (2 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installpam dh_installpam.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/debhelper.pod (123 of 280 strings; only 43.92% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installppp dh_installppp.1 Discard man/ja/debhelper-compat-upgrade-checklist.pod (170 of 351 strings; only 48.43% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installsystemd dh_installsystemd.1 man/ja/debhelper-obsolete-compat.pod is 100% translated (70 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh.pod (64 of 146 strings; only 43.83% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_auto_build.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_auto_clean.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_auto_configure.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_auto_install.pod is 90.47% translated (19 of 21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_auto_test.pod is 100% translated (18 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installsystemduser dh_installsystemduser.1 man/ja/dh_bugfiles.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_builddeb.pod is 90.9% translated (20 of 22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_clean.pod is 82.75% translated (24 of 29 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_compress.pod is 96% translated (24 of 25 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_dwz.pod (13 of 25 strings; only 52% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_fixperms.pod is 87.5% translated (14 of 16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installsysusers dh_installsysusers.1 man/ja/dh_gencontrol.pod is 94.44% translated (17 of 18 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_icons.pod is 100% translated (15 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_install.pod (33 of 50 strings; only 66% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installcatalogs.pod is 86.95% translated (20 of 23 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installchangelogs.pod (24 of 33 strings; only 72.72% translated; need 80%). pod2man --utf8 -c Debhelper -r "14.5" dh_installtmpfiles dh_installtmpfiles.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installcron.pod is 90.9% translated (20 of 22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installdeb.pod (25 of 63 strings; only 39.68% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installdebconf.pod (27 of 53 strings; only 50.94% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installdirs.pod (19 of 28 strings; only 67.85% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installdocs.pod (39 of 62 strings; only 62.9% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installemacsen.pod is 100% translated (30 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installexamples.pod (22 of 34 strings; only 64.7% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installifupdown.pod is 100% translated (20 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installudev dh_installudev.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installinfo.pod is 83.33% translated (20 of 24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installinit.pod (44 of 65 strings; only 67.69% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installinitramfs.pod (11 of 21 strings; only 52.38% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installlogcheck.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installlogrotate.pod is 100% translated (14 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_installwm dh_installwm.1 Discard man/ja/dh_installman.pod (28 of 38 strings; only 73.68% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installmanpages.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installmenu.pod is 100% translated (20 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installmime.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installmodules.pod is 95.45% translated (21 of 22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installpam.pod is 88.23% translated (15 of 17 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_installxfonts dh_installxfonts.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installppp.pod is 100% translated (19 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installudev.pod is 95.23% translated (20 of 21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installwm.pod is 88.46% translated (23 of 26 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_installxfonts.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_link.pod (28 of 36 strings; only 77.77% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_lintian.pod is 94.11% translated (16 of 17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_listpackages.pod is 91.66% translated (11 of 12 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_makeshlibs.pod (32 of 61 strings; only 52.45% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_md5sums.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_movefiles.pod is 100% translated (24 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_link dh_link.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_perl.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_prep.pod is 93.33% translated (14 of 15 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_shlibdeps.pod is 90.62% translated (29 of 32 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_strip.pod is 86.04% translated (37 of 43 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_testdir.pod is 100% translated (14 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_testroot.pod (12 of 21 strings; only 57.14% translated; need 80%). pod2man --utf8 -c Debhelper -r "14.5" dh_lintian dh_lintian.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/dh_usrlocal.pod is 86.36% translated (19 of 22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_systemd_enable.pod (17 of 37 strings; only 45.94% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_systemd_start.pod (18 of 25 strings; only 72% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/ja/strings-kept-translations.pod is 100% translated (2 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_listpackages dh_listpackages.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_makeshlibs dh_makeshlibs.1 man/pt/debhelper.pod is 98.92% translated (277 of 280 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/debhelper-compat-upgrade-checklist.pod is 99.43% translated (349 of 351 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_md5sums dh_md5sums.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/debhelper-obsolete-compat.pod is 100% translated (70 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh.pod is 100% translated (146 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_auto_build.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_auto_clean.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_auto_configure.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_missing dh_missing.1 man/pt/dh_auto_install.pod is 100% translated (21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_auto_test.pod is 100% translated (18 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_bugfiles.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_builddeb.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_clean.pod is 100% translated (29 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_compress.pod is 100% translated (25 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_movefiles dh_movefiles.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_dwz.pod is 100% translated (25 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_fixperms.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_gencontrol.pod is 100% translated (18 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_icons.pod is 100% translated (15 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_movetousr dh_movetousr.1 man/pt/dh_install.pod is 100% translated (50 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installcatalogs.pod is 100% translated (23 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installchangelogs.pod is 100% translated (33 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installcron.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_perl dh_perl.1 man/pt/dh_installdeb.pod is 100% translated (63 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installdebconf.pod is 100% translated (53 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installdirs.pod is 100% translated (28 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installdocs.pod is 98.38% translated (61 of 62 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installemacsen.pod is 100% translated (30 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installexamples.pod is 100% translated (34 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installifupdown.pod is 100% translated (20 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installinfo.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_prep dh_prep.1 man/pt/dh_installinit.pod is 100% translated (65 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installinitramfs.pod is 100% translated (21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installlogcheck.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installlogrotate.pod is 100% translated (14 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_shlibdeps dh_shlibdeps.1 man/pt/dh_installman.pod is 100% translated (38 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installmanpages.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installmenu.pod is 100% translated (20 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installmime.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installmodules.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installpam.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installppp.pod is 100% translated (19 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installudev.pod is 100% translated (21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_strip dh_strip.1 man/pt/dh_installwm.pod is 100% translated (26 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_installxfonts.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_link.pod is 100% translated (36 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_lintian.pod is 100% translated (17 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_listpackages.pod is 100% translated (12 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_makeshlibs.pod is 100% translated (61 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_md5sums.pod is 100% translated (16 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_movefiles.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.5" dh_systemd_enable dh_systemd_enable.1 man/pt/dh_perl.pod is 100% translated (24 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_prep.pod is 100% translated (15 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_shlibdeps.pod is 100% translated (32 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_strip.pod is 100% translated (43 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_testdir.pod is 100% translated (14 strings). pod2man --utf8 -c Debhelper -r "14.5" dh_systemd_start dh_systemd_start.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_testroot.pod is 100% translated (21 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_usrlocal.pod is 100% translated (22 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_systemd_enable.pod is 100% translated (37 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/dh_systemd_start.pod is 100% translated (25 strings). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! man/pt/strings-kept-translations.pod is 100% translated (2 strings). touch po4a-stamp pod2man --utf8 -c Debhelper -r "14.5" dh_testdir dh_testdir.1 pod2man --utf8 -c Debhelper -r "14.5" dh_testroot dh_testroot.1 pod2man --utf8 -c Debhelper -r "14.5" dh_ucf dh_ucf.1 pod2man --utf8 -c Debhelper -r "14.5" dh_update_autotools_config dh_update_autotools_config.1 pod2man --utf8 -c Debhelper -r "14.5" dh_usrlocal dh_usrlocal.1 pod2man --utf8 -c Debhelper -r "14.5" dh dh.1 set -e; \ lang=de ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "14.5" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{14.5}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi set -e; \ lang=es ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "14.5" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{14.5}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-es-stamp set -e; \ lang=fr ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "14.5" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{14.5}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-de-stamp set -e; \ lang=ja ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "14.5" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{14.5}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-fr-stamp set -e; \ lang=pt ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "14.5" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{14.5}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.5" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-ja-stamp touch translated-pt-stamp make[1]: Leaving directory '/build/debhelper-efh5fU/debhelper-14.5' dh_auto_test make -j2 test make[1]: Entering directory '/build/debhelper-efh5fU/debhelper-14.5' printf "package Debian::Debhelper::Dh_Version;\n\$version='14.5';\n1" > \ lib/Debian/Debhelper/Dh_Version.pm MAKEFLAGS= prove -lrj2 --timer t [13:22:45] t/Dh_Lib/00-use.t .................................... ok 80 ms ( 0.00 usr 0.01 sys + 0.05 cusr 0.02 csys = 0.08 CPU) [13:22:45] t/Dh_Lib/control-parsing.t ........................... ok 127 ms ( 0.00 usr 0.00 sys + 0.12 cusr 0.03 csys = 0.15 CPU) [13:22:45] t/Dh_Lib/path.t ...................................... ok 100 ms ( 0.00 usr 0.00 sys + 0.13 cusr 0.03 csys = 0.16 CPU) [13:22:45] t/buildsystems/01-build-system-basic-api.t ........... ok 109 ms ( 0.01 usr 0.00 sys + 0.14 cusr 0.02 csys = 0.17 CPU) [13:22:45] t/buildsystems/02-make-jobserver-makeflags.t ......... ok 164 ms ( 0.00 usr 0.00 sys + 0.14 cusr 0.02 csys = 0.16 CPU) [13:22:45] t/buildsystems/03-bs-auto-buildable.t ................ ok 220 ms ( 0.01 usr 0.00 sys + 0.20 cusr 0.05 csys = 0.26 CPU) [13:22:46] t/buildsystems/05-load-build-system.t ................ ok 227 ms ( 0.00 usr 0.00 sys + 0.20 cusr 0.02 csys = 0.22 CPU) [13:22:46] t/buildsystems/06-buildsystem-mkdir-rmdir.t .......... ok 95 ms ( 0.01 usr 0.00 sys + 0.07 cusr 0.02 csys = 0.10 CPU) [13:22:46] t/buildsystems/04-dh_auto_do_autoconf.t .............. ok 877 ms ( 0.02 usr 0.00 sys + 0.92 cusr 0.20 csys = 1.14 CPU) [13:22:46] t/debhelper-compat/syntax.t .......................... ok 146 ms ( 0.01 usr 0.00 sys + 0.13 cusr 0.02 csys = 0.16 CPU) [13:22:47] t/dh-lib.t ........................................... ok 228 ms ( 0.01 usr 0.00 sys + 0.14 cusr 0.05 csys = 0.20 CPU) [13:22:47] t/dh-sequencer.t ..................................... ok 87 ms ( 0.00 usr 0.00 sys + 0.06 cusr 0.01 csys = 0.07 CPU) [13:22:49] t/dh_compress.t ...................................... ok 2377 ms ( 0.02 usr 0.00 sys + 1.65 cusr 0.52 csys = 2.19 CPU) [13:22:51] t/dh_gencontrol/01-dbgsym-m-a-same.t ................. ok 1871 ms ( 0.00 usr 0.00 sys + 1.44 cusr 0.29 csys = 1.73 CPU) [13:22:52] t/dh_install/01-basics.t ............................. ok 833 ms ( 0.01 usr 0.00 sys + 0.63 cusr 0.14 csys = 0.78 CPU) [13:22:53] t/buildsystems/buildsystem_tests.t ................... ok 7272 ms ( 0.07 usr 0.01 sys + 5.53 cusr 1.35 csys = 6.96 CPU) [13:22:53] t/dh_install/02-bugs-53XXXX.t ........................ ok 1610 ms ( 0.01 usr 0.00 sys + 2.21 cusr 0.54 csys = 2.76 CPU) [13:22:54] t/dh_install/03-866570-dont-install-from-host.t ...... ok 535 ms ( 0.00 usr 0.01 sys + 1.62 cusr 0.42 csys = 2.05 CPU) [13:22:56] t/dh_install/04-sourcedir.t .......................... ok 2046 ms ( 0.02 usr 0.00 sys + 1.49 cusr 0.30 csys = 1.81 CPU) [13:22:56] t/dh_installdocs/01-868204-ignore-broken-symlinks.t .. ok 669 ms ( 0.00 usr 0.00 sys + 0.35 cusr 0.08 csys = 0.43 CPU) [13:23:00] t/dh_installdocs/dh_installdocs.t .................... ok 3471 ms ( 0.02 usr 0.00 sys + 1.90 cusr 0.39 csys = 2.31 CPU) [13:23:01] t/dh_installgsettings/dh_installgsettings.t .......... ok 1312 ms ( 0.01 usr 0.00 sys + 0.67 cusr 0.14 csys = 0.82 CPU) [13:23:03] t/dh_installchangelogs/dh_installchangelogs.t ........ ok 8863 ms ( 0.08 usr 0.00 sys + 9.07 cusr 2.19 csys = 11.34 CPU) [13:23:03] t/dh_installman/01-basics.t .......................... skipped: Test requires man or man-recode [13:23:04] t/dh_installinit/dh_installinit.t .................... ok 2932 ms ( 0.03 usr 0.00 sys + 6.59 cusr 1.73 csys = 8.35 CPU) [13:23:04] t/dh_installpam/dh_installpam.t ...................... ok 1379 ms ( 0.01 usr 0.00 sys + 2.12 cusr 0.49 csys = 2.62 CPU) [13:23:06] t/dh_installsystemd/dh_installsystemd_tmpfiles.t ..... ok 1576 ms ( 0.01 usr 0.00 sys + 0.81 cusr 0.16 csys = 0.98 CPU) [13:23:07] t/dh_installsystemd/dh_systemd.t ..................... ok 1633 ms ( 0.02 usr 0.01 sys + 0.93 cusr 0.23 csys = 1.19 CPU) [13:23:12] t/dh_installsystemduser/dh_installsystemduser.t ...... ok 4746 ms ( 0.05 usr 0.00 sys + 2.49 cusr 0.56 csys = 3.10 CPU) [13:23:15] t/dh_link/01-basic.t ................................. ok 3282 ms ( 0.03 usr 0.00 sys + 1.80 cusr 0.37 csys = 2.20 CPU) [13:23:17] t/dh_link/02-346405.t ................................ ok 2158 ms ( 0.02 usr 0.00 sys + 1.21 cusr 0.24 csys = 1.47 CPU) [13:23:18] t/dh_link/03-894229.t ................................ ok 129 ms ( 0.00 usr 0.00 sys + 0.08 cusr 0.02 csys = 0.10 CPU) [13:23:19] t/dh_missing/01-no-missing.t ......................... ok 1415 ms ( 0.01 usr 0.00 sys + 1.01 cusr 0.24 csys = 1.26 CPU) [13:23:21] t/dh_missing/02-fail-on-missing.t .................... ok 1701 ms ( 0.01 usr 0.00 sys + 1.06 cusr 0.25 csys = 1.32 CPU) [13:23:22] t/dh_missing/03-dh_install-redirection.t ............. ok 905 ms ( 0.00 usr 0.00 sys + 0.50 cusr 0.12 csys = 0.62 CPU) [13:23:23] t/dh_missing/04-not-installed-glob.t ................. ok 1524 ms ( 0.02 usr 0.00 sys + 0.75 cusr 0.16 csys = 0.93 CPU) [13:23:26] t/dh_movetousr/dh_movetousr.t ........................ ok 2783 ms ( 0.03 usr 0.01 sys + 1.42 cusr 0.34 csys = 1.80 CPU) [13:23:29] t/dh_usrlocal/01-basic.t ............................. ok 3354 ms ( 0.02 usr 0.01 sys + 1.75 cusr 0.44 csys = 2.22 CPU) [13:23:30] t/dh_installsystemd/dh_installsystemd.t .............. ok 25818 ms ( 0.25 usr 0.03 sys + 27.79 cusr 6.28 csys = 34.35 CPU) [13:23:30] t/override_target.t .................................. ok 212 ms ( 0.01 usr 0.00 sys + 0.10 cusr 0.01 csys = 0.12 CPU) [13:23:30] t/pod.t .............................................. skipped: Test::Pod required [13:23:32] t/maintscript.t ...................................... ok 2768 ms ( 0.02 usr 0.01 sys + 14.89 cusr 3.38 csys = 18.30 CPU) [13:23:32] t/size.t ............................................. ok 120 ms ( 0.01 usr 0.00 sys + 0.04 cusr 0.02 csys = 0.07 CPU) [13:23:33] t/syntax/syntax-libs.t ............................... ok 1253 ms ( 0.01 usr 0.01 sys + 0.71 cusr 0.17 csys = 0.90 CPU) [13:23:36] t/syntax/syntax-progs.t .............................. ok 2820 ms ( 0.03 usr 0.00 sys + 1.72 cusr 0.45 csys = 2.20 CPU) [13:23:38] t/shellcheck.t ....................................... ok 7829 ms ( 0.08 usr 0.02 sys + 7.24 cusr 2.96 csys = 10.30 CPU) [13:23:38] All tests successful. Files=46, Tests=1111, 53 wallclock secs ( 0.55 usr 0.08 sys + 53.66 cusr 13.75 csys = 68.04 CPU) Result: PASS make[1]: Leaving directory '/build/debhelper-efh5fU/debhelper-14.5' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j2 install DESTDIR=/build/debhelper-efh5fU/debhelper-14.5/debian/tmp AM_UPDATE_INFO_DIR=no INSTALL="install --strip-program=true" make[1]: Entering directory '/build/debhelper-efh5fU/debhelper-14.5' install -d /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/bin \ /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/share/debhelper/autoscripts \ /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/share/perl5/Debian/Debhelper/Sequence \ /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/share/perl5/Debian/Debhelper/Buildsystem \ /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/share/perl5/Debian/Debhelper/DH install dh dh_assistant dh_auto_build dh_auto_clean dh_auto_configure dh_auto_install dh_auto_test dh_bugfiles dh_builddeb dh_clean dh_compress dh_computeautosubstvars dh_dwz dh_fixperms dh_gencontrol dh_icons dh_install dh_installalternatives dh_installcatalogs dh_installchangelogs dh_installcron dh_installdeb dh_installdebconf dh_installdirs dh_installdocs dh_installemacsen dh_installexamples dh_installgsettings dh_installifupdown dh_installinfo dh_installinit dh_installinitramfs dh_installlogcheck dh_installlogrotate dh_installman dh_installmanpages dh_installmenu dh_installmime dh_installmodules dh_installpam dh_installppp dh_installsystemd dh_installsystemduser dh_installsysusers dh_installtmpfiles dh_installudev dh_installwm dh_installxfonts dh_link dh_lintian dh_listpackages dh_makeshlibs dh_md5sums dh_missing dh_movefiles dh_movetousr dh_perl dh_prep dh_shlibdeps dh_strip dh_systemd_enable dh_systemd_start dh_testdir dh_testroot dh_ucf dh_update_autotools_config dh_usrlocal /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/bin install -m 0644 autoscripts/* /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/share/debhelper/autoscripts install -m 0644 lib/Debian/Debhelper/*.pm /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/share/perl5/Debian/Debhelper [ "/usr" = /usr ] || \ sed -i '/$prefix=/s@/usr@/usr@g' /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/share/perl5/Debian/Debhelper/Dh_Lib.pm if [ "14.5" ]; then \ MV=$(echo "14.5" | perl -ne 'print $1 if /^(\d+)[~.]/;') ; \ sed -i "/constant HIGHEST_STABLE_COMPAT_LEVEL =>/s@=>.*;@=> ${MV};@g" /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/share/perl5/Debian/Debhelper/Dh_Lib.pm ; \ fi install -m 0644 lib/Debian/Debhelper/Sequence/*.pm /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/share/perl5/Debian/Debhelper/Sequence install -m 0644 lib/Debian/Debhelper/Buildsystem/*.pm /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/share/perl5/Debian/Debhelper/Buildsystem install -m 0644 lib/Debian/Debhelper/DH/*.pm /build/debhelper-efh5fU/debhelper-14.5/debian/tmp/usr/share/perl5/Debian/Debhelper/DH make[1]: Leaving directory '/build/debhelper-efh5fU/debhelper-14.5' chmod -R u\+rwX /build/debhelper-efh5fU/debhelper-14.5/debian/tmp debian/rules execute_before_dh_install make[1]: Entering directory '/build/debhelper-efh5fU/debhelper-14.5' PERLLIBDIR=$(perl -MConfig -e 'print $Config{vendorlib}')/ ; \ perl -I"debian/tmp/${PERLLIBDIR}" debian/gen-provides > debian/debhelper.substvars make[1]: Leaving directory '/build/debhelper-efh5fU/debhelper-14.5' dh_install dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_installman: warning: man is not available. Skipping re-encode of UTF-8 manpages dh_perl dh_link dh_missing dh_fixperms dh_compress dh_installdeb dh_computeautosubstvars dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdebhelper-perl' in '../libdebhelper-perl_14.5_all.deb'. dpkg-deb: building package 'debhelper' in '../debhelper_14.5_all.deb'. dpkg-genbuildinfo -O../debhelper_14.5_amd64.buildinfo dpkg-genchanges -O../debhelper_14.5_amd64.changes dpkg-genchanges: info: including full source code in upload dpkg-source --after-build . dpkg-buildpackage: info: full upload; Debian-native package (full source is included) -------------------------------------------------------------------------------- Build finished at 2026-09-19T13:23:40Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes Sat, 19 Sep 2026 13:23:40 +0000 | +------------------------------------------------------------------------------+ debhelper_14.5_amd64.changes: ----------------------------- Format: 1.8 Date: Thu, 17 Sep 2026 16:11:41 +0000 Source: debhelper Binary: debhelper libdebhelper-perl Architecture: source all Version: 14.5 Distribution: perl-5.44-throwaway Urgency: medium Maintainer: Debhelper Maintainers Changed-By: Niels Thykier Description: debhelper - helper programs for debian/rules libdebhelper-perl - debhelper perl modules Changes: debhelper (14.5) unstable; urgency=medium . * Revert some changes per agreement with CTTE while they discuss #1141909 to enable backports. - Revert "dh_installsystemd: also add tmpfiles deps in compat 12" - Revert "dh_installtmpfiles: add dependency on tmpfiles implementation" Checksums-Sha1: 1cd3db8c8590b2b0dadf7de67b7148c291957230 919 debhelper_14.5.dsc 71ed7230125074157495c646fbd64b0aac414640 645136 debhelper_14.5.tar.xz 364a30c634de780e3aea0947f372d9edd7edd28a 944380 debhelper_14.5_all.deb 73dec2870d202cf67d7929e42d27b33b6d7ede39 4670 debhelper_14.5_amd64.buildinfo 4e872818e6a7e220494bca547f820d9a9036c5ad 77676 libdebhelper-perl_14.5_all.deb Checksums-Sha256: c0eb160e7d6db9095c9fa3eb14e87a6f389dc608179e7adc64addfb6388aa422 919 debhelper_14.5.dsc c0b2bc5aa0e515ac3699be895d61f2de2d839fceef5da1c1e03e1535b0591a6a 645136 debhelper_14.5.tar.xz d00b4d2d4bb3dbf4eac404c2ecedecde9a075917cd7c61e81bb5f1b7d8b42f54 944380 debhelper_14.5_all.deb 9912d6353cb376999b01f17b3fda9e8726ec491ecb576522cb4ef95755df2015 4670 debhelper_14.5_amd64.buildinfo 58dd133073814cc8623768654b28b49a7c5847f555454edada047296e544b7ef 77676 libdebhelper-perl_14.5_all.deb Files: 4287ec561db028e4d3a77ccc6d2bc549 919 devel optional debhelper_14.5.dsc b315082422d881cf5eba37261f265569 645136 devel optional debhelper_14.5.tar.xz 72e66dd8908f5e88b066e162f538f215 944380 devel optional debhelper_14.5_all.deb 9ad965cfe2b835984a7aa8c2883f43a1 4670 devel optional debhelper_14.5_amd64.buildinfo dc901b20dabaceb7775f6008acd181e7 77676 perl optional libdebhelper-perl_14.5_all.deb +------------------------------------------------------------------------------+ | Buildinfo Sat, 19 Sep 2026 13:23:40 +0000 | +------------------------------------------------------------------------------+ Format: 1.0 Source: debhelper Binary: debhelper libdebhelper-perl Architecture: all source Version: 14.5 Checksums-Md5: 4287ec561db028e4d3a77ccc6d2bc549 919 debhelper_14.5.dsc 72e66dd8908f5e88b066e162f538f215 944380 debhelper_14.5_all.deb dc901b20dabaceb7775f6008acd181e7 77676 libdebhelper-perl_14.5_all.deb Checksums-Sha1: 1cd3db8c8590b2b0dadf7de67b7148c291957230 919 debhelper_14.5.dsc 364a30c634de780e3aea0947f372d9edd7edd28a 944380 debhelper_14.5_all.deb 4e872818e6a7e220494bca547f820d9a9036c5ad 77676 libdebhelper-perl_14.5_all.deb Checksums-Sha256: c0eb160e7d6db9095c9fa3eb14e87a6f389dc608179e7adc64addfb6388aa422 919 debhelper_14.5.dsc d00b4d2d4bb3dbf4eac404c2ecedecde9a075917cd7c61e81bb5f1b7d8b42f54 944380 debhelper_14.5_all.deb 58dd133073814cc8623768654b28b49a7c5847f555454edada047296e544b7ef 77676 libdebhelper-perl_14.5_all.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Sat, 19 Sep 2026 13:23:40 +0000 Build-Path: /build/debhelper-efh5fU/debhelper-14.5 Build-Tainted-By: usr-local-has-programs Installed-Build-Depends: base-files (= 14.2), base-passwd (= 3.6.8), bash (= 5.3-4), binutils (= 2.47-6), binutils-common (= 2.47-6), binutils-x86-64-linux-gnu (= 2.47-6), build-essential (= 12.12), bzip2 (= 1.0.8-6+b2), coreutils (= 9.10-1), cpp (= 4:16.1.0-3), cpp-16 (= 16.2.0-3), cpp-16-x86-64-linux-gnu (= 16.2.0-3), cpp-x86-64-linux-gnu (= 4:16.1.0-3), dash (= 0.5.12-12), debconf (= 1.5.92), debianutils (= 5.24), diffutils (= 1:3.12-1), dpkg (= 1.23.11), dpkg-dev (= 1.23.11), findutils (= 4.11.0-2), g++ (= 4:16.1.0-3), g++-16 (= 16.2.0-3), g++-16-x86-64-linux-gnu (= 16.2.0-3), g++-x86-64-linux-gnu (= 4:16.1.0-3), gcc (= 4:16.1.0-3), gcc-16 (= 16.2.0-3), gcc-16-base (= 16.2.0-3), gcc-16-x86-64-linux-gnu (= 16.2.0-3), gcc-x86-64-linux-gnu (= 4:16.1.0-3), gettext (= 1.0-5), gettext-base (= 1.0-5), grep (= 3.12-1), gzip (= 1.14-1), hostname (= 3.25), init-system-helpers (= 1.69+nmu1), libacl1 (= 2.4.0-1), libasan8 (= 16.2.0-3), libatomic1 (= 16.2.0-3), libattr1 (= 1:2.6.0-1), libaudit-common (= 1:4.1.2-1), libaudit1 (= 1:4.1.2-1+b2), libbinutils (= 2.47-6), libblkid1 (= 2.42.3-1), libbz2-1.0 (= 1.0.8-6+b2), libc-bin (= 2.43-5), libc-dev-bin (= 2.43-5), libc-gconv-modules-extra (= 2.43-5), libc6 (= 2.43-5), libc6-dev (= 2.43-5), libcap-ng0 (= 0.9.6-1), libcc1-0 (= 16.2.0-3), libclass-inspector-perl (= 1.36-3), libcrypt1 (= 1:4.5.2+20251210-1), libctf-nobfd0 (= 2.47-6), libctf0 (= 2.47-6), libdb5.3t64 (= 5.3.28+dfsg2-11+b1), libdebconfclient0 (= 0.283), libdpkg-perl (= 1.23.11), libffi8 (= 3.8.0-2), libfile-sharedir-perl (= 1.118-3), libgcc-16-dev (= 16.2.0-3), libgcc-s1 (= 16.2.0-3), libgdbm-compat4t64 (= 1.26-1+b2), libgdbm6t64 (= 1.26-1+b2), libgmp10 (= 2:6.3.0+dfsg-5+b2), libgomp1 (= 16.2.0-3), libgprofng0 (= 2.47-6), libhwasan0 (= 16.2.0-3), libisl23 (= 0.28-1), libitm1 (= 16.2.0-3), libjansson4 (= 2.15.1-1), liblsan0 (= 16.2.0-3), liblzma5 (= 5.8.4-1), libmd0 (= 1.2.0-2), libmount1 (= 2.42.3-1), libmpc3 (= 1.3.1-3), libmpfr6 (= 4.2.2-3), libnuma1 (= 2.0.19-1+b2), libosp5 (= 1.5.2-15.2), libpam-modules (= 1.7.0-8), libpam-modules-bin (= 1.7.0-8), libpam-runtime (= 1.7.0-8), libpam0g (= 1.7.0-8), libpcre2-8-0 (= 10.48-3), libperl5.44 (= 5.44.0-1), libpod-parser-perl (= 1.67-1), libquadmath0 (= 16.2.0-3), libselinux1 (= 3.11-2), libsframe3 (= 2.47-6), libsgmls-perl (= 1.03ii-38), libsmartcols1 (= 2.42.3-1), libssl3t64 (= 3.6.4-1), libstdc++-16-dev (= 16.2.0-3), libstdc++6 (= 16.2.0-3), libsyntax-keyword-try-perl (= 0.31-1+b2), libsystemd0 (= 262~rc3-1), libtinfo6 (= 6.6+20260608-2), libtsan2 (= 16.2.0-3), libubsan1 (= 16.2.0-3), libudev1 (= 262~rc3-1), libunistring5 (= 1.4.2-1), libuuid1 (= 2.42.3-1), libxml2-16 (= 2.15.4+dfsg-1), libxs-parse-keyword-perl (= 0.49-1+b2), libyaml-tiny-perl (= 1.76-1), libzstd1 (= 1.5.7+dfsg-4), linux-libc-dev (= 7.2.6-1), make (= 4.4.1-3), mawk (= 1.3.4.20260302-1), ncurses-base (= 6.6+20260608-2), ncurses-bin (= 6.6+20260608-2), opensp (= 1.5.2-15.2), openssl-provider-legacy (= 3.6.4-1), patch (= 2.8-2), perl (= 5.44.0-1), perl-base (= 5.44.0-1), perl-modules-5.44 (= 5.44.0-1), po4a (= 0.74-3), sed (= 4.9-3), sgml-base (= 1.31+nmu1), shellcheck (= 0.11.0-2+b1), sysvinit-utils (= 3.18-1), tar (= 1.35+dfsg-6), util-linux (= 2.42.3-1), xz-utils (= 5.8.4-1), zlib1g (= 1:1.3.dfsg+really1.3.2-3) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LANGUAGE="en_GB:en" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" LD_PRELOAD="libeatmydata.so" SOURCE_DATE_EPOCH="1789661501" +------------------------------------------------------------------------------+ | Package contents Sat, 19 Sep 2026 13:23:40 +0000 | +------------------------------------------------------------------------------+ debhelper_14.5_all.deb ---------------------- new Debian package, version 2.0. size 944380 bytes: control archive=9724 bytes. 2396 bytes, 22 lines control 28297 bytes, 394 lines md5sums Package: debhelper Version: 14.5 Architecture: all Maintainer: Debhelper Maintainers Installed-Size: 1523 Depends: dh-autoreconf (>= 17~), dh-strip-nondeterminism (>= 0.028~), dpkg-dev (>= 1.18.2~), autotools-dev, dpkg (>= 1.18.0~), dwz (>= 0.12.20190711), file (>= 3.23), libdebhelper-perl (= 14.5), libdpkg-perl (>= 1.17.14), man-db, po-debconf, perl:any Suggests: dh-make Conflicts: dh-buildinfo Breaks: cmake (<< 3.9~), dh-debputy (<< 0.1.36~), meson (<< 0.40.0~) Replaces: dh-buildinfo Provides: debhelper-compat (= 9), debhelper-compat (= 10), debhelper-compat (= 11), debhelper-compat (= 12), debhelper-compat (= 13), debhelper-compat (= 14), dh-sequence-dwz, dh-sequence-elf-tools, dh-sequence-installinitramfs, dh-sequence-installsysusers, dh-sequence-movetousr, dh-sequence-single-binary, dh-sequence-systemd Section: devel Priority: optional Multi-Arch: foreign Description: helper programs for debian/rules A collection of programs that can be used in a debian/rules file to automate common tasks related to building Debian packages. Programs are included to install various files into your package, compress files, fix file permissions, integrate your package with the Debian menu system, debconf, doc-base, etc. Most Debian packages use debhelper as part of their build process. Commands: dh, dh_assistant, dh_auto_build, dh_auto_clean, dh_auto_configure, dh_auto_install, dh_auto_test, dh_bugfiles, dh_builddeb, dh_clean, dh_compress, dh_computeautosubstvars, dh_dwz, dh_fixperms, dh_gencontrol, dh_icons, dh_install, dh_installalternatives, dh_installcatalogs, dh_installchangelogs, dh_installcron, dh_installdeb, dh_installdebconf, dh_installdirs, dh_installdocs, dh_installemacsen, dh_installexamples, dh_installgsettings, dh_installifupdown, dh_installinfo, dh_installinit, dh_installinitramfs, dh_installlogcheck, dh_installlogrotate, dh_installman, dh_installmanpages, dh_installmenu, dh_installmime, dh_installmodules, dh_installpam, dh_installppp, dh_installsystemd, dh_installsystemduser, dh_installsysusers, dh_installtmpfiles, dh_installudev, dh_installwm, dh_installxfonts, dh_link, dh_lintian, dh_listpackages, dh_makeshlibs, dh_md5sums, dh_missing, dh_movefiles, dh_movetousr, dh_perl, dh_prep, dh_shlibdeps, dh_strip, dh_systemd_enable, dh_systemd_start, dh_testdir, dh_testroot, dh_ucf, dh_update_autotools_config, dh_usrlocal drwxr-xr-x root/root 0 2026-09-17 16:11 ./ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/bin/ -rwxr-xr-x root/root 30773 2026-09-17 16:11 ./usr/bin/dh -rwxr-xr-x root/root 124645 2026-09-17 16:11 ./usr/bin/dh_assistant -rwxr-xr-x root/root 1443 2026-09-17 16:11 ./usr/bin/dh_auto_build -rwxr-xr-x root/root 1585 2026-09-17 16:11 ./usr/bin/dh_auto_clean -rwxr-xr-x root/root 1703 2026-09-17 16:11 ./usr/bin/dh_auto_configure -rwxr-xr-x root/root 3333 2026-09-17 16:11 ./usr/bin/dh_auto_install -rwxr-xr-x root/root 1730 2026-09-17 16:11 ./usr/bin/dh_auto_test -rwxr-xr-x root/root 3787 2026-09-17 16:11 ./usr/bin/dh_bugfiles -rwxr-xr-x root/root 4944 2026-09-17 16:11 ./usr/bin/dh_builddeb -rwxr-xr-x root/root 5692 2026-09-17 16:11 ./usr/bin/dh_clean -rwxr-xr-x root/root 8092 2026-09-17 16:11 ./usr/bin/dh_compress -rwxr-xr-x root/root 1679 2026-09-17 16:11 ./usr/bin/dh_computeautosubstvars -rwxr-xr-x root/root 5421 2026-09-17 16:11 ./usr/bin/dh_dwz -rwxr-xr-x root/root 5491 2026-09-17 16:11 ./usr/bin/dh_fixperms -rwxr-xr-x root/root 7366 2026-09-17 16:11 ./usr/bin/dh_gencontrol -rwxr-xr-x root/root 2129 2026-09-17 16:11 ./usr/bin/dh_icons -rwxr-xr-x root/root 12946 2026-09-17 16:11 ./usr/bin/dh_install -rwxr-xr-x root/root 7051 2026-09-17 16:11 ./usr/bin/dh_installalternatives -rwxr-xr-x root/root 3523 2026-09-17 16:11 ./usr/bin/dh_installcatalogs -rwxr-xr-x root/root 13045 2026-09-17 16:11 ./usr/bin/dh_installchangelogs -rwxr-xr-x root/root 1807 2026-09-17 16:11 ./usr/bin/dh_installcron -rwxr-xr-x root/root 13712 2026-09-17 16:11 ./usr/bin/dh_installdeb -rwxr-xr-x root/root 7071 2026-09-17 16:11 ./usr/bin/dh_installdebconf -rwxr-xr-x root/root 3274 2026-09-17 16:11 ./usr/bin/dh_installdirs -rwxr-xr-x root/root 15831 2026-09-17 16:11 ./usr/bin/dh_installdocs -rwxr-xr-x root/root 4276 2026-09-17 16:11 ./usr/bin/dh_installemacsen -rwxr-xr-x root/root 6071 2026-09-17 16:11 ./usr/bin/dh_installexamples -rwxr-xr-x root/root 2404 2026-09-17 16:11 ./usr/bin/dh_installgsettings -rwxr-xr-x root/root 1618 2026-09-17 16:11 ./usr/bin/dh_installifupdown -rwxr-xr-x root/root 3572 2026-09-17 16:11 ./usr/bin/dh_installinfo -rwxr-xr-x root/root 13988 2026-09-17 16:11 ./usr/bin/dh_installinit -rwxr-xr-x root/root 2672 2026-09-17 16:11 ./usr/bin/dh_installinitramfs -rwxr-xr-x root/root 2101 2026-09-17 16:11 ./usr/bin/dh_installlogcheck -rwxr-xr-x root/root 1277 2026-09-17 16:11 ./usr/bin/dh_installlogrotate -rwxr-xr-x root/root 13825 2026-09-17 16:11 ./usr/bin/dh_installman -rwxr-xr-x root/root 5049 2026-09-17 16:11 ./usr/bin/dh_installmanpages -rwxr-xr-x root/root 2426 2026-09-17 16:11 ./usr/bin/dh_installmenu -rwxr-xr-x root/root 1555 2026-09-17 16:11 ./usr/bin/dh_installmime -rwxr-xr-x root/root 2990 2026-09-17 16:11 ./usr/bin/dh_installmodules -rwxr-xr-x root/root 1224 2026-09-17 16:11 ./usr/bin/dh_installpam -rwxr-xr-x root/root 1430 2026-09-17 16:11 ./usr/bin/dh_installppp -rwxr-xr-x root/root 14777 2026-09-17 16:11 ./usr/bin/dh_installsystemd -rwxr-xr-x root/root 9190 2026-09-17 16:11 ./usr/bin/dh_installsystemduser -rwxr-xr-x root/root 3089 2026-09-17 16:11 ./usr/bin/dh_installsysusers -rwxr-xr-x root/root 4490 2026-09-17 16:11 ./usr/bin/dh_installtmpfiles -rwxr-xr-x root/root 2186 2026-09-17 16:11 ./usr/bin/dh_installudev -rwxr-xr-x root/root 3491 2026-09-17 16:11 ./usr/bin/dh_installwm -rwxr-xr-x root/root 2900 2026-09-17 16:11 ./usr/bin/dh_installxfonts -rwxr-xr-x root/root 4586 2026-09-17 16:11 ./usr/bin/dh_link -rwxr-xr-x root/root 1948 2026-09-17 16:11 ./usr/bin/dh_lintian -rwxr-xr-x root/root 862 2026-09-17 16:11 ./usr/bin/dh_listpackages -rwxr-xr-x root/root 17187 2026-09-17 16:11 ./usr/bin/dh_makeshlibs -rwxr-xr-x root/root 3222 2026-09-17 16:11 ./usr/bin/dh_md5sums -rwxr-xr-x root/root 9279 2026-09-17 16:11 ./usr/bin/dh_missing -rwxr-xr-x root/root 4958 2026-09-17 16:11 ./usr/bin/dh_movefiles -rwxr-xr-x root/root 7853 2026-09-17 16:11 ./usr/bin/dh_movetousr -rwxr-xr-x root/root 5191 2026-09-17 16:11 ./usr/bin/dh_perl -rwxr-xr-x root/root 1947 2026-09-17 16:11 ./usr/bin/dh_prep -rwxr-xr-x root/root 6501 2026-09-17 16:11 ./usr/bin/dh_shlibdeps -rwxr-xr-x root/root 15246 2026-09-17 16:11 ./usr/bin/dh_strip -rwxr-xr-x root/root 9522 2026-09-17 16:11 ./usr/bin/dh_systemd_enable -rwxr-xr-x root/root 9061 2026-09-17 16:11 ./usr/bin/dh_systemd_start -rwxr-xr-x root/root 1373 2026-09-17 16:11 ./usr/bin/dh_testdir -rwxr-xr-x root/root 3011 2026-09-17 16:11 ./usr/bin/dh_testroot -rwxr-xr-x root/root 2544 2026-09-17 16:11 ./usr/bin/dh_ucf -rwxr-xr-x root/root 1925 2026-09-17 16:11 ./usr/bin/dh_update_autotools_config -rwxr-xr-x root/root 4337 2026-09-17 16:11 ./usr/bin/dh_usrlocal drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/doc/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/doc/debhelper/ -rw-r--r-- root/root 11634 2026-09-17 16:11 ./usr/share/doc/debhelper/PROGRAMMING.md.gz -rw-r--r-- root/root 56 2026-09-17 16:11 ./usr/share/doc/debhelper/README -rw-r--r-- root/root 868 2026-09-17 16:11 ./usr/share/doc/debhelper/SUPPORT-POLICY -rw-r--r-- root/root 730 2026-09-17 16:11 ./usr/share/doc/debhelper/TODO -rw-r--r-- root/root 9226 2026-09-17 16:11 ./usr/share/doc/debhelper/changelog.gz -rw-r--r-- root/root 4199 2026-09-17 16:11 ./usr/share/doc/debhelper/copyright drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/doc/debhelper/examples/ -rwxr-xr-x root/root 29 2026-09-17 16:11 ./usr/share/doc/debhelper/examples/rules.tiny drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/de/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/de/man1/ -rw-r--r-- root/root 9942 2026-09-17 16:11 ./usr/share/man/de/man1/dh.1.gz -rw-r--r-- root/root 1803 2026-09-17 16:11 ./usr/share/man/de/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1886 2026-09-17 16:11 ./usr/share/man/de/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1918 2026-09-17 16:11 ./usr/share/man/de/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2453 2026-09-17 16:11 ./usr/share/man/de/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1947 2026-09-17 16:11 ./usr/share/man/de/man1/dh_auto_test.1.gz -rw-r--r-- root/root 2015 2026-09-17 16:11 ./usr/share/man/de/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1890 2026-09-17 16:11 ./usr/share/man/de/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2245 2026-09-17 16:11 ./usr/share/man/de/man1/dh_clean.1.gz -rw-r--r-- root/root 2267 2026-09-17 16:11 ./usr/share/man/de/man1/dh_compress.1.gz -rw-r--r-- root/root 2496 2026-09-17 16:11 ./usr/share/man/de/man1/dh_dwz.1.gz -rw-r--r-- root/root 1992 2026-09-17 16:11 ./usr/share/man/de/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1853 2026-09-17 16:11 ./usr/share/man/de/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1782 2026-09-17 16:11 ./usr/share/man/de/man1/dh_icons.1.gz -rw-r--r-- root/root 3797 2026-09-17 16:11 ./usr/share/man/de/man1/dh_install.1.gz -rw-r--r-- root/root 2176 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 2745 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installchangelogs.1.gz -rw-r--r-- root/root 1609 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installcron.1.gz -rw-r--r-- root/root 4379 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installdeb.1.gz -rw-r--r-- root/root 3681 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installdebconf.1.gz -rw-r--r-- root/root 2087 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installdirs.1.gz -rw-r--r-- root/root 4447 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installdocs.1.gz -rw-r--r-- root/root 2116 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 2763 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installexamples.1.gz -rw-r--r-- root/root 1657 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1968 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installinfo.1.gz -rw-r--r-- root/root 4499 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installinit.1.gz -rw-r--r-- root/root 2107 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installinitramfs.1.gz -rw-r--r-- root/root 1696 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1529 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 3437 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installman.1.gz -rw-r--r-- root/root 2170 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1694 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1463 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installmime.1.gz -rw-r--r-- root/root 1955 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1568 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installpam.1.gz -rw-r--r-- root/root 1599 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installppp.1.gz -rw-r--r-- root/root 1741 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installudev.1.gz -rw-r--r-- root/root 2125 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installwm.1.gz -rw-r--r-- root/root 1898 2026-09-17 16:11 ./usr/share/man/de/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 2644 2026-09-17 16:11 ./usr/share/man/de/man1/dh_link.1.gz -rw-r--r-- root/root 1589 2026-09-17 16:11 ./usr/share/man/de/man1/dh_lintian.1.gz -rw-r--r-- root/root 1513 2026-09-17 16:11 ./usr/share/man/de/man1/dh_listpackages.1.gz -rw-r--r-- root/root 4576 2026-09-17 16:11 ./usr/share/man/de/man1/dh_makeshlibs.1.gz -rw-r--r-- root/root 1698 2026-09-17 16:11 ./usr/share/man/de/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2353 2026-09-17 16:11 ./usr/share/man/de/man1/dh_movefiles.1.gz -rw-r--r-- root/root 2208 2026-09-17 16:11 ./usr/share/man/de/man1/dh_perl.1.gz -rw-r--r-- root/root 1731 2026-09-17 16:11 ./usr/share/man/de/man1/dh_prep.1.gz -rw-r--r-- root/root 2686 2026-09-17 16:11 ./usr/share/man/de/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 3219 2026-09-17 16:11 ./usr/share/man/de/man1/dh_strip.1.gz -rw-r--r-- root/root 2660 2026-09-17 16:11 ./usr/share/man/de/man1/dh_systemd_enable.1.gz -rw-r--r-- root/root 2374 2026-09-17 16:11 ./usr/share/man/de/man1/dh_systemd_start.1.gz -rw-r--r-- root/root 1509 2026-09-17 16:11 ./usr/share/man/de/man1/dh_testdir.1.gz -rw-r--r-- root/root 2145 2026-09-17 16:11 ./usr/share/man/de/man1/dh_testroot.1.gz -rw-r--r-- root/root 2246 2026-09-17 16:11 ./usr/share/man/de/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/de/man7/ -rw-r--r-- root/root 15497 2026-09-17 16:11 ./usr/share/man/de/man7/debhelper-compat-upgrade-checklist.7.gz -rw-r--r-- root/root 3039 2026-09-17 16:11 ./usr/share/man/de/man7/debhelper-obsolete-compat.7.gz -rw-r--r-- root/root 18078 2026-09-17 16:11 ./usr/share/man/de/man7/debhelper.7.gz drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/es/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/es/man1/ -rw-r--r-- root/root 1540 2026-09-17 16:11 ./usr/share/man/es/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1604 2026-09-17 16:11 ./usr/share/man/es/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1653 2026-09-17 16:11 ./usr/share/man/es/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2148 2026-09-17 16:11 ./usr/share/man/es/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1646 2026-09-17 16:11 ./usr/share/man/es/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1720 2026-09-17 16:11 ./usr/share/man/es/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1672 2026-09-17 16:11 ./usr/share/man/es/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2016 2026-09-17 16:11 ./usr/share/man/es/man1/dh_compress.1.gz -rw-r--r-- root/root 1715 2026-09-17 16:11 ./usr/share/man/es/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1581 2026-09-17 16:11 ./usr/share/man/es/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1488 2026-09-17 16:11 ./usr/share/man/es/man1/dh_icons.1.gz -rw-r--r-- root/root 1931 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 1417 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installcron.1.gz -rw-r--r-- root/root 1928 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 1468 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1777 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installinfo.1.gz -rw-r--r-- root/root 1490 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1335 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 1971 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1559 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1285 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installmime.1.gz -rw-r--r-- root/root 1722 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1373 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installpam.1.gz -rw-r--r-- root/root 1413 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installppp.1.gz -rw-r--r-- root/root 1545 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installudev.1.gz -rw-r--r-- root/root 1881 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installwm.1.gz -rw-r--r-- root/root 1683 2026-09-17 16:11 ./usr/share/man/es/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 1397 2026-09-17 16:11 ./usr/share/man/es/man1/dh_lintian.1.gz -rw-r--r-- root/root 1298 2026-09-17 16:11 ./usr/share/man/es/man1/dh_listpackages.1.gz -rw-r--r-- root/root 1462 2026-09-17 16:11 ./usr/share/man/es/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2035 2026-09-17 16:11 ./usr/share/man/es/man1/dh_movefiles.1.gz -rw-r--r-- root/root 1950 2026-09-17 16:11 ./usr/share/man/es/man1/dh_perl.1.gz -rw-r--r-- root/root 1508 2026-09-17 16:11 ./usr/share/man/es/man1/dh_prep.1.gz -rw-r--r-- root/root 2456 2026-09-17 16:11 ./usr/share/man/es/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 1317 2026-09-17 16:11 ./usr/share/man/es/man1/dh_testdir.1.gz -rw-r--r-- root/root 1951 2026-09-17 16:11 ./usr/share/man/es/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/es/man7/ -rw-r--r-- root/root 2811 2026-09-17 16:11 ./usr/share/man/es/man7/debhelper-obsolete-compat.7.gz drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/fr/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/fr/man1/ -rw-r--r-- root/root 9405 2026-09-17 16:11 ./usr/share/man/fr/man1/dh.1.gz -rw-r--r-- root/root 1783 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1860 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1911 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2454 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1893 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1977 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1840 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2227 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_clean.1.gz -rw-r--r-- root/root 2249 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_compress.1.gz -rw-r--r-- root/root 2470 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_dwz.1.gz -rw-r--r-- root/root 1950 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1815 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1782 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_icons.1.gz -rw-r--r-- root/root 3892 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_install.1.gz -rw-r--r-- root/root 2188 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 2745 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installchangelogs.1.gz -rw-r--r-- root/root 1628 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installcron.1.gz -rw-r--r-- root/root 4351 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installdeb.1.gz -rw-r--r-- root/root 3623 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installdebconf.1.gz -rw-r--r-- root/root 2081 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installdirs.1.gz -rw-r--r-- root/root 4318 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installdocs.1.gz -rw-r--r-- root/root 2142 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 2711 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installexamples.1.gz -rw-r--r-- root/root 1669 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1961 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installinfo.1.gz -rw-r--r-- root/root 4287 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installinit.1.gz -rw-r--r-- root/root 2143 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installinitramfs.1.gz -rw-r--r-- root/root 1714 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1537 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 3516 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installman.1.gz -rw-r--r-- root/root 2118 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1731 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1472 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installmime.1.gz -rw-r--r-- root/root 1933 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1560 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installpam.1.gz -rw-r--r-- root/root 1578 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installppp.1.gz -rw-r--r-- root/root 1759 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installudev.1.gz -rw-r--r-- root/root 2175 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installwm.1.gz -rw-r--r-- root/root 1890 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 2630 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_link.1.gz -rw-r--r-- root/root 1596 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_lintian.1.gz -rw-r--r-- root/root 1519 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_listpackages.1.gz -rw-r--r-- root/root 4403 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_makeshlibs.1.gz -rw-r--r-- root/root 1679 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2346 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_movefiles.1.gz -rw-r--r-- root/root 2161 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_perl.1.gz -rw-r--r-- root/root 1733 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_prep.1.gz -rw-r--r-- root/root 2604 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 3189 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_strip.1.gz -rw-r--r-- root/root 2634 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_systemd_enable.1.gz -rw-r--r-- root/root 2362 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_systemd_start.1.gz -rw-r--r-- root/root 1520 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_testdir.1.gz -rw-r--r-- root/root 2107 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_testroot.1.gz -rw-r--r-- root/root 2210 2026-09-17 16:11 ./usr/share/man/fr/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/fr/man7/ -rw-r--r-- root/root 14708 2026-09-17 16:11 ./usr/share/man/fr/man7/debhelper-compat-upgrade-checklist.7.gz -rw-r--r-- root/root 3012 2026-09-17 16:11 ./usr/share/man/fr/man7/debhelper-obsolete-compat.7.gz -rw-r--r-- root/root 16058 2026-09-17 16:11 ./usr/share/man/fr/man7/debhelper.7.gz drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/ja/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/ja/man1/ -rw-r--r-- root/root 1681 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1834 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1795 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2387 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1836 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1846 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1823 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2197 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_clean.1.gz -rw-r--r-- root/root 2205 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_compress.1.gz -rw-r--r-- root/root 1807 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1695 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1635 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_icons.1.gz -rw-r--r-- root/root 2107 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 1441 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installcron.1.gz -rw-r--r-- root/root 2020 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 1530 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1831 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installinfo.1.gz -rw-r--r-- root/root 1543 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1400 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 2198 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1612 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1285 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installmime.1.gz -rw-r--r-- root/root 1841 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1367 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installpam.1.gz -rw-r--r-- root/root 1495 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installppp.1.gz -rw-r--r-- root/root 1647 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installudev.1.gz -rw-r--r-- root/root 2052 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installwm.1.gz -rw-r--r-- root/root 1803 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 1485 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_lintian.1.gz -rw-r--r-- root/root 1340 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_listpackages.1.gz -rw-r--r-- root/root 1524 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2323 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_movefiles.1.gz -rw-r--r-- root/root 2211 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_perl.1.gz -rw-r--r-- root/root 1603 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_prep.1.gz -rw-r--r-- root/root 2765 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 3337 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_strip.1.gz -rw-r--r-- root/root 1433 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_testdir.1.gz -rw-r--r-- root/root 2153 2026-09-17 16:11 ./usr/share/man/ja/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/ja/man7/ -rw-r--r-- root/root 3116 2026-09-17 16:11 ./usr/share/man/ja/man7/debhelper-obsolete-compat.7.gz drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/man1/ -rw-r--r-- root/root 8237 2026-09-17 16:11 ./usr/share/man/man1/dh.1.gz -rw-r--r-- root/root 14993 2026-09-17 16:11 ./usr/share/man/man1/dh_assistant.1.gz -rw-r--r-- root/root 1416 2026-09-17 16:11 ./usr/share/man/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1474 2026-09-17 16:11 ./usr/share/man/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1528 2026-09-17 16:11 ./usr/share/man/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 1967 2026-09-17 16:11 ./usr/share/man/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1528 2026-09-17 16:11 ./usr/share/man/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1601 2026-09-17 16:11 ./usr/share/man/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1510 2026-09-17 16:11 ./usr/share/man/man1/dh_builddeb.1.gz -rw-r--r-- root/root 1780 2026-09-17 16:11 ./usr/share/man/man1/dh_clean.1.gz -rw-r--r-- root/root 1833 2026-09-17 16:11 ./usr/share/man/man1/dh_compress.1.gz -rw-r--r-- root/root 1292 2026-09-17 16:11 ./usr/share/man/man1/dh_computeautosubstvars.1.gz -rw-r--r-- root/root 2023 2026-09-17 16:11 ./usr/share/man/man1/dh_dwz.1.gz -rw-r--r-- root/root 1584 2026-09-17 16:11 ./usr/share/man/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1445 2026-09-17 16:11 ./usr/share/man/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1389 2026-09-17 16:11 ./usr/share/man/man1/dh_icons.1.gz -rw-r--r-- root/root 3198 2026-09-17 16:11 ./usr/share/man/man1/dh_install.1.gz -rw-r--r-- root/root 1562 2026-09-17 16:11 ./usr/share/man/man1/dh_installalternatives.1.gz -rw-r--r-- root/root 1772 2026-09-17 16:11 ./usr/share/man/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 2254 2026-09-17 16:11 ./usr/share/man/man1/dh_installchangelogs.1.gz -rw-r--r-- root/root 1294 2026-09-17 16:11 ./usr/share/man/man1/dh_installcron.1.gz -rw-r--r-- root/root 3723 2026-09-17 16:11 ./usr/share/man/man1/dh_installdeb.1.gz -rw-r--r-- root/root 3075 2026-09-17 16:11 ./usr/share/man/man1/dh_installdebconf.1.gz -rw-r--r-- root/root 1674 2026-09-17 16:11 ./usr/share/man/man1/dh_installdirs.1.gz -rw-r--r-- root/root 3730 2026-09-17 16:11 ./usr/share/man/man1/dh_installdocs.1.gz -rw-r--r-- root/root 1719 2026-09-17 16:11 ./usr/share/man/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 2277 2026-09-17 16:11 ./usr/share/man/man1/dh_installexamples.1.gz -rw-r--r-- root/root 1517 2026-09-17 16:11 ./usr/share/man/man1/dh_installgsettings.1.gz -rw-r--r-- root/root 1328 2026-09-17 16:11 ./usr/share/man/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1596 2026-09-17 16:11 ./usr/share/man/man1/dh_installinfo.1.gz -rw-r--r-- root/root 3815 2026-09-17 16:11 ./usr/share/man/man1/dh_installinit.1.gz -rw-r--r-- root/root 1689 2026-09-17 16:11 ./usr/share/man/man1/dh_installinitramfs.1.gz -rw-r--r-- root/root 1356 2026-09-17 16:11 ./usr/share/man/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1209 2026-09-17 16:11 ./usr/share/man/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 2894 2026-09-17 16:11 ./usr/share/man/man1/dh_installman.1.gz -rw-r--r-- root/root 1735 2026-09-17 16:11 ./usr/share/man/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1366 2026-09-17 16:11 ./usr/share/man/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1159 2026-09-17 16:11 ./usr/share/man/man1/dh_installmime.1.gz -rw-r--r-- root/root 1541 2026-09-17 16:11 ./usr/share/man/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1225 2026-09-17 16:11 ./usr/share/man/man1/dh_installpam.1.gz -rw-r--r-- root/root 1265 2026-09-17 16:11 ./usr/share/man/man1/dh_installppp.1.gz -rw-r--r-- root/root 3043 2026-09-17 16:11 ./usr/share/man/man1/dh_installsystemd.1.gz -rw-r--r-- root/root 1926 2026-09-17 16:11 ./usr/share/man/man1/dh_installsystemduser.1.gz -rw-r--r-- root/root 1438 2026-09-17 16:11 ./usr/share/man/man1/dh_installsysusers.1.gz -rw-r--r-- root/root 1685 2026-09-17 16:11 ./usr/share/man/man1/dh_installtmpfiles.1.gz -rw-r--r-- root/root 1386 2026-09-17 16:11 ./usr/share/man/man1/dh_installudev.1.gz -rw-r--r-- root/root 1707 2026-09-17 16:11 ./usr/share/man/man1/dh_installwm.1.gz -rw-r--r-- root/root 1512 2026-09-17 16:11 ./usr/share/man/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 2113 2026-09-17 16:11 ./usr/share/man/man1/dh_link.1.gz -rw-r--r-- root/root 1255 2026-09-17 16:11 ./usr/share/man/man1/dh_lintian.1.gz -rw-r--r-- root/root 1151 2026-09-17 16:11 ./usr/share/man/man1/dh_listpackages.1.gz -rw-r--r-- root/root 3800 2026-09-17 16:11 ./usr/share/man/man1/dh_makeshlibs.1.gz -rw-r--r-- root/root 1319 2026-09-17 16:11 ./usr/share/man/man1/dh_md5sums.1.gz -rw-r--r-- root/root 1963 2026-09-17 16:11 ./usr/share/man/man1/dh_missing.1.gz -rw-r--r-- root/root 1892 2026-09-17 16:11 ./usr/share/man/man1/dh_movefiles.1.gz -rw-r--r-- root/root 2217 2026-09-17 16:11 ./usr/share/man/man1/dh_movetousr.1.gz -rw-r--r-- root/root 1765 2026-09-17 16:11 ./usr/share/man/man1/dh_perl.1.gz -rw-r--r-- root/root 1356 2026-09-17 16:11 ./usr/share/man/man1/dh_prep.1.gz -rw-r--r-- root/root 2161 2026-09-17 16:11 ./usr/share/man/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 2697 2026-09-17 16:11 ./usr/share/man/man1/dh_strip.1.gz -rw-r--r-- root/root 2240 2026-09-17 16:11 ./usr/share/man/man1/dh_systemd_enable.1.gz -rw-r--r-- root/root 1952 2026-09-17 16:11 ./usr/share/man/man1/dh_systemd_start.1.gz -rw-r--r-- root/root 1184 2026-09-17 16:11 ./usr/share/man/man1/dh_testdir.1.gz -rw-r--r-- root/root 1756 2026-09-17 16:11 ./usr/share/man/man1/dh_testroot.1.gz -rw-r--r-- root/root 1683 2026-09-17 16:11 ./usr/share/man/man1/dh_ucf.1.gz -rw-r--r-- root/root 1152 2026-09-17 16:11 ./usr/share/man/man1/dh_update_autotools_config.1.gz -rw-r--r-- root/root 1839 2026-09-17 16:11 ./usr/share/man/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/man7/ -rw-r--r-- root/root 13073 2026-09-17 16:11 ./usr/share/man/man7/debhelper-compat-upgrade-checklist.7.gz -rw-r--r-- root/root 2502 2026-09-17 16:11 ./usr/share/man/man7/debhelper-obsolete-compat.7.gz -rw-r--r-- root/root 15738 2026-09-17 16:11 ./usr/share/man/man7/debhelper.7.gz drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/pt/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/pt/man1/ -rw-r--r-- root/root 8915 2026-09-17 16:11 ./usr/share/man/pt/man1/dh.1.gz -rw-r--r-- root/root 1628 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1687 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1726 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2243 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1720 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1811 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1702 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2054 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_clean.1.gz -rw-r--r-- root/root 2111 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_compress.1.gz -rw-r--r-- root/root 2255 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_dwz.1.gz -rw-r--r-- root/root 1804 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1648 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1601 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_icons.1.gz -rw-r--r-- root/root 3500 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_install.1.gz -rw-r--r-- root/root 1997 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 2584 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installchangelogs.1.gz -rw-r--r-- root/root 1466 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installcron.1.gz -rw-r--r-- root/root 4109 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installdeb.1.gz -rw-r--r-- root/root 3408 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installdebconf.1.gz -rw-r--r-- root/root 1893 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installdirs.1.gz -rw-r--r-- root/root 4073 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installdocs.1.gz -rw-r--r-- root/root 1944 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 2519 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installexamples.1.gz -rw-r--r-- root/root 1496 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1798 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installinfo.1.gz -rw-r--r-- root/root 4148 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installinit.1.gz -rw-r--r-- root/root 1906 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installinitramfs.1.gz -rw-r--r-- root/root 1544 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1381 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 3178 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installman.1.gz -rw-r--r-- root/root 1981 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1552 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1327 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installmime.1.gz -rw-r--r-- root/root 1748 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1409 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installpam.1.gz -rw-r--r-- root/root 1447 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installppp.1.gz -rw-r--r-- root/root 1582 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installudev.1.gz -rw-r--r-- root/root 1956 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installwm.1.gz -rw-r--r-- root/root 1731 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 2397 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_link.1.gz -rw-r--r-- root/root 1431 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_lintian.1.gz -rw-r--r-- root/root 1321 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_listpackages.1.gz -rw-r--r-- root/root 4162 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_makeshlibs.1.gz -rw-r--r-- root/root 1509 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2095 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_movefiles.1.gz -rw-r--r-- root/root 1984 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_perl.1.gz -rw-r--r-- root/root 1557 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_prep.1.gz -rw-r--r-- root/root 2437 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 2954 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_strip.1.gz -rw-r--r-- root/root 2509 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_systemd_enable.1.gz -rw-r--r-- root/root 2210 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_systemd_start.1.gz -rw-r--r-- root/root 1353 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_testdir.1.gz -rw-r--r-- root/root 1919 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_testroot.1.gz -rw-r--r-- root/root 2030 2026-09-17 16:11 ./usr/share/man/pt/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/man/pt/man7/ -rw-r--r-- root/root 13889 2026-09-17 16:11 ./usr/share/man/pt/man7/debhelper-compat-upgrade-checklist.7.gz -rw-r--r-- root/root 2869 2026-09-17 16:11 ./usr/share/man/pt/man7/debhelper-obsolete-compat.7.gz -rw-r--r-- root/root 15322 2026-09-17 16:11 ./usr/share/man/pt/man7/debhelper.7.gz libdebhelper-perl_14.5_all.deb ------------------------------ new Debian package, version 2.0. size 77676 bytes: control archive=2852 bytes. 536 bytes, 17 lines control 7331 bytes, 85 lines md5sums Package: libdebhelper-perl Source: debhelper Version: 14.5 Architecture: all Maintainer: Debhelper Maintainers Installed-Size: 345 Depends: perl:any Breaks: debhelper (<< 12.6~) Replaces: debhelper (<< 12.6~) Section: perl Priority: optional Multi-Arch: foreign Description: debhelper perl modules A collection of programs that can be used in a debian/rules file to automate common tasks related to building Debian packages. . This package provides the perl modules used by the scripts in debhelper. drwxr-xr-x root/root 0 2026-09-17 16:11 ./ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/debhelper/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/ -rw-r--r-- root/root 41 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/maintscript-helper -rw-r--r-- root/root 174 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-alternatives -rw-r--r-- root/root 339 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-emacsen -rw-r--r-- root/root 215 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-icons -rw-r--r-- root/root 333 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-init -rw-r--r-- root/root 248 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-init-nostart -rw-r--r-- root/root 416 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-init-restart -rw-r--r-- root/root 264 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-init-tmpfiles -rw-r--r-- root/root 137 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-menu -rw-r--r-- root/root 189 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-menu-method -rw-r--r-- root/root 231 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-modules -rw-r--r-- root/root 656 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-systemd-dont-enable -rw-r--r-- root/root 741 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-systemd-enable -rw-r--r-- root/root 397 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-systemd-restart -rw-r--r-- root/root 345 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-systemd-restartnostart -rw-r--r-- root/root 305 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-systemd-start -rw-r--r-- root/root 693 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-systemd-user-dont-enable -rw-r--r-- root/root 770 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-systemd-user-enable -rw-r--r-- root/root 634 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-systemd-user-restart -rw-r--r-- root/root 202 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-sysusers -rw-r--r-- root/root 121 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-ucf -rw-r--r-- root/root 699 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-usrlocal -rw-r--r-- root/root 310 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-wm -rw-r--r-- root/root 223 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-wm-noman -rw-r--r-- root/root 59 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postinst-xfonts -rw-r--r-- root/root 141 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-debconf -rw-r--r-- root/root 83 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-icons -rw-r--r-- root/root 213 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-init -rw-r--r-- root/root 261 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-init-tmpfiles-purge -rw-r--r-- root/root 215 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-init-tmpfiles-remove -rw-r--r-- root/root 112 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-menu -rw-r--r-- root/root 213 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-menu-method -rw-r--r-- root/root 99 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-modules -rw-r--r-- root/root 55 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-sgmlcatalog -rw-r--r-- root/root 88 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-systemd -rw-r--r-- root/root 114 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-systemd-reload-only -rw-r--r-- root/root 95 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-systemd-user -rw-r--r-- root/root 376 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-systemd-user-reload-only -rw-r--r-- root/root 256 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-ucf -rw-r--r-- root/root 60 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/postrm-xfonts -rw-r--r-- root/root 260 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/preinst-emacsen -rw-r--r-- root/root 134 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/preinst-init-chmod -rw-r--r-- root/root 153 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/preinst-init-stop -rw-r--r-- root/root 141 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/preinst-systemd-stop -rw-r--r-- root/root 66 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/prerm-alternatives -rw-r--r-- root/root 202 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/prerm-emacsen -rw-r--r-- root/root 130 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/prerm-init -rw-r--r-- root/root 152 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/prerm-init-norestart -rw-r--r-- root/root 118 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/prerm-systemd -rw-r--r-- root/root 140 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/prerm-systemd-restart -rw-r--r-- root/root 147 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/prerm-systemd-user-stop -rw-r--r-- root/root 92 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/prerm-usrlocal -rw-r--r-- root/root 84 2026-09-17 16:11 ./usr/share/debhelper/autoscripts/prerm-wm drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/debputy/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/debputy/debputy/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/debputy/debputy/plugins/ -rw-r--r-- root/root 16649 2026-09-17 16:11 ./usr/share/debputy/debputy/plugins/debhelper-documentation.json drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/doc/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/doc/libdebhelper-perl/ -rw-r--r-- root/root 9228 2026-09-17 16:11 ./usr/share/doc/libdebhelper-perl/changelog.gz -rw-r--r-- root/root 4199 2026-09-17 16:11 ./usr/share/doc/libdebhelper-perl/copyright drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/perl5/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/perl5/Debian/ drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/ -rw-r--r-- root/root 19160 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem.pm drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem/ -rw-r--r-- root/root 1057 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem/ant.pm -rw-r--r-- root/root 2939 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem/autoconf.pm -rw-r--r-- root/root 6532 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem/cmake.pm -rw-r--r-- root/root 5808 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem/makefile.pm -rw-r--r-- root/root 4923 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem/meson.pm -rw-r--r-- root/root 1794 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem/ninja.pm -rw-r--r-- root/root 2483 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem/perl_build.pm -rw-r--r-- root/root 2875 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem/perl_makemaker.pm -rw-r--r-- root/root 5585 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem/python_distutils.pm -rw-r--r-- root/root 2460 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem/qmake.pm -rw-r--r-- root/root 306 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Buildsystem/qmake6.pm drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/DH/ -rw-r--r-- root/root 8709 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/DH/AddonAPI.pm -rw-r--r-- root/root 967 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/DH/SequenceState.pm -rw-r--r-- root/root 8972 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Dh_Buildsystems.pm -rw-r--r-- root/root 9585 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Dh_Getopt.pm -rw-r--r-- root/root 106070 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Dh_Lib.pm -rw-r--r-- root/root 57 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Dh_Version.pm -rw-r--r-- root/root 3649 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Sequence.pm drwxr-xr-x root/root 0 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Sequence/ -rw-r--r-- root/root 280 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Sequence/build_stamp.pm -rw-r--r-- root/root 290 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Sequence/dwz.pm -rw-r--r-- root/root 297 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Sequence/elf_tools.pm -rw-r--r-- root/root 330 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Sequence/installinitramfs.pm -rw-r--r-- root/root 126 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Sequence/installsysusers.pm -rw-r--r-- root/root 162 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Sequence/movetousr.pm -rw-r--r-- root/root 3000 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Sequence/root_sequence.pm -rw-r--r-- root/root 2140 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Sequence/single_binary.pm -rw-r--r-- root/root 610 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/Sequence/systemd.pm -rw-r--r-- root/root 31838 2026-09-17 16:11 ./usr/share/perl5/Debian/Debhelper/SequencerUtil.pm +------------------------------------------------------------------------------+ | Post Build Sat, 19 Sep 2026 13:23:41 +0000 | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup Sat, 19 Sep 2026 13:23:41 +0000 | +------------------------------------------------------------------------------+ Purging /build/debhelper-efh5fU Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary Sat, 19 Sep 2026 13:23:41 +0000 | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 15636 Build-Time: 79 Distribution: perl-5.44-throwaway Host Architecture: amd64 Install-Time: 3 Job: /srv/debomatic/incoming/debhelper_14.5.dsc Machine Architecture: amd64 Package: debhelper Package-Time: 90 Source-Version: 14.5 Space: 15636 Status: successful Version: 14.5 -------------------------------------------------------------------------------- Finished at 2026-09-19T13:23:40Z Build needed 00:01:30, 15636k disk space