sbuild (Debian sbuild) 0.91.5 (17 December 2025) on carme.larted.org.uk +==============================================================================+ | dgit 14.3 (amd64) Sun, 18 Jan 2026 18:39:01 +0000 | +==============================================================================+ Package: dgit Version: 14.3 Source Version: 14.3 Distribution: perl-5.42-throwaway Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: Setting up the chroot... I: Creating chroot session... I: Setting up log color... +------------------------------------------------------------------------------+ | Chroot Setup Commands Sun, 18 Jan 2026 18:39:02 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup dgit_14.3 perl-5.42-throwaway amd64 ---------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup dgit_14.3 perl-5.42-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: Setting up apt archive... +------------------------------------------------------------------------------+ | Update chroot Sun, 18 Jan 2026 18:39:03 +0000 | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.42 InRelease [3042 B] Hit:2 http://deb.debian.org/debian unstable InRelease Get:1 file:/srv/reprepro perl-5.42 InRelease [3042 B] Hit:3 http://deb.debian.org/debian sid InRelease Get:4 file:/srv/reprepro perl-5.42/main amd64 Packages [634 kB] Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files Sun, 18 Jan 2026 18:39:04 +0000 | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/dgit_14.3.dsc exists in /srv/debomatic/incoming; copying to chroot +------------------------------------------------------------------------------+ | Install package build dependencies Sun, 18 Jan 2026 18:39:05 +0000 | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 12), gettext, po4a, tcl, build-essential Filtered Build-Depends: debhelper-compat (= 12), gettext, po4a, tcl, build-essential dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/build/dgit-2Dfshv/resolver-hPERav/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/build/dgit-2Dfshv/resolver-hPERav/apt_archive ./ InRelease Get:2 copy:/build/dgit-2Dfshv/resolver-hPERav/apt_archive ./ Release [609 B] Ign:3 copy:/build/dgit-2Dfshv/resolver-hPERav/apt_archive ./ Release.gpg Get:4 copy:/build/dgit-2Dfshv/resolver-hPERav/apt_archive ./ Sources [620 B] Get:5 copy:/build/dgit-2Dfshv/resolver-hPERav/apt_archive ./ Packages [659 B] Fetched 1888 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libclass-inspector-perl libdebhelper-perl libelf1t64 libfile-sharedir-perl libfile-stripnondeterminism-perl libmagic-mgc libmagic1t64 libosp5 libpipeline1 libpod-parser-perl libsgmls-perl libsyntax-keyword-try-perl libtcl8.6 libtool libuchardet0 libxml2-16 libxs-parse-keyword-perl libyaml-tiny-perl m4 man-db opensp po-debconf po4a sensible-utils sgml-base tcl tcl8.6 tzdata Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev gnulib-l10n groff sgmlspl sgmls-doc libtool-doc gfortran | fortran95-compiler m4-doc apparmor less www-browser doc-base sgml-data libmail-box-perl sgml-base-doc tcl-tclreadline Recommended packages: curl | wget | lynx libarchive-cpio-perl libltdl-dev libmail-sendmail-perl liblocale-gettext-perl libterm-readkey-perl libtext-wrapi18n-perl libunicode-linebreak-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libclass-inspector-perl libdebhelper-perl libelf1t64 libfile-sharedir-perl libfile-stripnondeterminism-perl libmagic-mgc libmagic1t64 libosp5 libpipeline1 libpod-parser-perl libsgmls-perl libsyntax-keyword-try-perl libtcl8.6 libtool libuchardet0 libxml2-16 libxs-parse-keyword-perl libyaml-tiny-perl m4 man-db opensp po-debconf po4a sbuild-build-depends-main-dummy sensible-utils sgml-base tcl tcl8.6 tzdata 0 upgraded, 44 newly installed, 0 to remove and 0 not upgraded. Need to get 16.4 MB/16.5 MB of archives. After this operation, 56.1 MB of additional disk space will be used. Get:1 file:/srv/reprepro perl-5.42/main amd64 libxs-parse-keyword-perl amd64 0.49-1+b1 [66.4 kB] Get:2 copy:/build/dgit-2Dfshv/resolver-hPERav/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [868 B] Get:3 file:/srv/reprepro perl-5.42/main amd64 libsyntax-keyword-try-perl amd64 0.31-1+b1 [27.8 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 tzdata all 2025c-3 [263 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.26 [27.0 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.46-5+b1 [338 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.46-5+b1 [110 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.46-5+b1 [43.8 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.23.2-1 [245 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-2+b1 [68.8 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-10 [1194 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.41.3-3 [99.1 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-2 [42.1 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.20-2 [325 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.72-3.1 [494 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20240727.1 [60.2 kB] Get:18 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.18.1-3 [878 kB] Get:19 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.23.2-1 [772 kB] Get:20 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.29 [92.6 kB] Get:21 http://deb.debian.org/debian unstable/main amd64 libtool all 2.5.4-9 [540 kB] Get:22 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 21 [12.2 kB] Get:23 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:24 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.15.0-1 [19.9 kB] Get:25 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.15.0-1 [8812 B] Get:26 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.194-1 [185 kB] Get:27 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.16-2 [108 kB] Get:28 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.15.1+dfsg-2+b1 [641 kB] Get:29 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.23.2-1 [1687 kB] Get:30 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:31 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.22 [216 kB] Get:32 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.29 [943 kB] Get:33 http://deb.debian.org/debian unstable/main amd64 libclass-inspector-perl all 1.36-3 [17.5 kB] Get:34 http://deb.debian.org/debian unstable/main amd64 libfile-sharedir-perl all 1.118-3 [16.0 kB] Get:35 http://deb.debian.org/debian unstable/main amd64 libosp5 amd64 1.5.2-15.2 [972 kB] Get:36 http://deb.debian.org/debian unstable/main amd64 libpod-parser-perl all 1.67-1 [94.1 kB] Get:37 http://deb.debian.org/debian unstable/main amd64 libsgmls-perl all 1.03ii-38 [23.7 kB] Get:38 http://deb.debian.org/debian unstable/main amd64 libtcl8.6 amd64 8.6.17+dfsg-1+b1 [1053 kB] Get:39 http://deb.debian.org/debian unstable/main amd64 libyaml-tiny-perl all 1.76-1 [29.8 kB] Get:40 http://deb.debian.org/debian unstable/main amd64 sgml-base all 1.31+nmu1 [10.9 kB] Get:41 http://deb.debian.org/debian unstable/main amd64 opensp amd64 1.5.2-15.2 [448 kB] Get:42 http://deb.debian.org/debian unstable/main amd64 po4a all 0.74-1 [2619 kB] Get:43 http://deb.debian.org/debian unstable/main amd64 tcl8.6 amd64 8.6.17+dfsg-1+b1 [121 kB] Get:44 http://deb.debian.org/debian unstable/main amd64 tcl amd64 8.6.16 [4096 B] Preconfiguring packages ... Fetched 16.4 MB in 0s (123 MB/s) Selecting previously unselected package tzdata. (Reading database ... 23411 files and directories currently installed.) Preparing to unpack .../00-tzdata_2025c-3_all.deb ... Unpacking tzdata (2025c-3) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.46-5+b1_amd64.deb ... Unpacking libmagic-mgc (1:5.46-5+b1) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../03-libmagic1t64_1%3a5.46-5+b1_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.46-5+b1) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.46-5+b1_amd64.deb ... Unpacking file (1:5.46-5+b1) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_0.23.2-1_amd64.deb ... Unpacking gettext-base (0.23.2-1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../06-libuchardet0_0.0.8-2+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-2+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.23.0-10_amd64.deb ... Unpacking groff-base (1.23.0-10) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.41.3-3_amd64.deb ... Unpacking bsdextrautils (2.41.3-3) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../09-libpipeline1_1.5.8-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-2) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.20-2_amd64.deb ... Unpacking m4 (1.4.20-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.18.1-3_all.deb ... Unpacking automake (1:1.18.1-3) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.23.2-1_all.deb ... Unpacking autopoint (0.23.2-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_13.29_all.deb ... Unpacking libdebhelper-perl (13.29) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.5.4-9_all.deb ... Unpacking libtool (2.5.4-9) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_21_all.deb ... Unpacking dh-autoreconf (21) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.15.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.15.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../22-libelf1t64_0.194-1_amd64.deb ... Unpacking libelf1t64:amd64 (0.194-1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.16-2_amd64.deb ... Unpacking dwz (0.16-2) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../24-libxml2-16_2.15.1+dfsg-2+b1_amd64.deb ... Unpacking libxml2-16:amd64 (2.15.1+dfsg-2+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.23.2-1_amd64.deb ... Unpacking gettext (0.23.2-1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.22_all.deb ... Unpacking po-debconf (1.0.22) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.29_all.deb ... Unpacking debhelper (13.29) ... Selecting previously unselected package libclass-inspector-perl. Preparing to unpack .../29-libclass-inspector-perl_1.36-3_all.deb ... Unpacking libclass-inspector-perl (1.36-3) ... Selecting previously unselected package libfile-sharedir-perl. Preparing to unpack .../30-libfile-sharedir-perl_1.118-3_all.deb ... Unpacking libfile-sharedir-perl (1.118-3) ... Selecting previously unselected package libosp5. Preparing to unpack .../31-libosp5_1.5.2-15.2_amd64.deb ... Unpacking libosp5 (1.5.2-15.2) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../32-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libsgmls-perl. Preparing to unpack .../33-libsgmls-perl_1.03ii-38_all.deb ... Unpacking libsgmls-perl (1.03ii-38) ... Selecting previously unselected package libxs-parse-keyword-perl. Preparing to unpack .../34-libxs-parse-keyword-perl_0.49-1+b1_amd64.deb ... Unpacking libxs-parse-keyword-perl (0.49-1+b1) ... Selecting previously unselected package libsyntax-keyword-try-perl. Preparing to unpack .../35-libsyntax-keyword-try-perl_0.31-1+b1_amd64.deb ... Unpacking libsyntax-keyword-try-perl (0.31-1+b1) ... Selecting previously unselected package libtcl8.6:amd64. Preparing to unpack .../36-libtcl8.6_8.6.17+dfsg-1+b1_amd64.deb ... Unpacking libtcl8.6:amd64 (8.6.17+dfsg-1+b1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../37-libyaml-tiny-perl_1.76-1_all.deb ... Unpacking libyaml-tiny-perl (1.76-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../38-sgml-base_1.31+nmu1_all.deb ... Unpacking sgml-base (1.31+nmu1) ... Selecting previously unselected package opensp. Preparing to unpack .../39-opensp_1.5.2-15.2_amd64.deb ... Unpacking opensp (1.5.2-15.2) ... Selecting previously unselected package po4a. Preparing to unpack .../40-po4a_0.74-1_all.deb ... Unpacking po4a (0.74-1) ... Selecting previously unselected package tcl8.6. Preparing to unpack .../41-tcl8.6_8.6.17+dfsg-1+b1_amd64.deb ... Unpacking tcl8.6 (8.6.17+dfsg-1+b1) ... Selecting previously unselected package tcl. Preparing to unpack .../42-tcl_8.6.16_amd64.deb ... Unpacking tcl (8.6.16) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../43-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.8-2) ... Setting up libsgmls-perl (1.03ii-38) ... Setting up bsdextrautils (2.41.3-3) ... Setting up libclass-inspector-perl (1.36-3) ... Setting up libmagic-mgc (1:5.46-5+b1) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:amd64 (2.15.1+dfsg-2+b1) ... Setting up libdebhelper-perl (13.29) ... Setting up libmagic1t64:amd64 (1:5.46-5+b1) ... Setting up gettext-base (0.23.2-1) ... Setting up m4 (1.4.20-2) ... Setting up file (1:5.46-5+b1) ... Setting up libyaml-tiny-perl (1.76-1) ... Setting up libelf1t64:amd64 (0.194-1) ... Setting up libosp5 (1.5.2-15.2) ... Setting up tzdata (2025c-3) ... Current default time zone: 'Etc/UTC' Local time is now: Sun Jan 18 18:39:11 UTC 2026. Universal Time is now: Sun Jan 18 18:39:11 UTC 2026. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up autotools-dev (20240727.1) ... Setting up libpod-parser-perl (1.67-1) ... Setting up libtcl8.6:amd64 (8.6.17+dfsg-1+b1) ... Setting up autopoint (0.23.2-1) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.16-2) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:amd64 (0.0.8-2+b1) ... Setting up libfile-sharedir-perl (1.118-3) ... Setting up sgml-base (1.31+nmu1) ... Setting up automake (1:1.18.1-3) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.0-1) ... Setting up tcl8.6 (8.6.17+dfsg-1+b1) ... Setting up gettext (0.23.2-1) ... Setting up libtool (2.5.4-9) ... Setting up opensp (1.5.2-15.2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (21) ... Setting up libxs-parse-keyword-perl (0.49-1+b1) ... Setting up dh-strip-nondeterminism (1.15.0-1) ... Setting up libsyntax-keyword-try-perl (0.31-1+b1) ... Setting up groff-base (1.23.0-10) ... Setting up tcl (8.6.16) ... Setting up po4a (0.74-1) ... Setting up po-debconf (1.0.22) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.29) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.42-9) ... +------------------------------------------------------------------------------+ | Check architectures Sun, 18 Jan 2026 18:39:11 +0000 | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Build environment Sun, 18 Jan 2026 18:39:11 +0000 | +------------------------------------------------------------------------------+ Kernel: Linux 6.16.5+deb14-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.16.5-1 (2025-09-05) amd64 (x86_64) Toolchain package versions: binutils_2.45.50.20251209-1+b1 dpkg-dev_1.23.3 g++-14_14.3.0-10 g++-15_15.2.0-12 gcc-14_14.3.0-10 gcc-15_15.2.0-12 libc6-dev_2.42-9 libstdc++-14-dev_14.3.0-10 libstdc++-15-dev_15.2.0-12 libstdc++6_15.2.0-12 linux-libc-dev_6.18.5-1 Package versions: adduser_3.154 apt_3.1.13 autoconf_2.72-3.1 automake_1:1.18.1-3 autopoint_0.23.2-1 autotools-dev_20240727.1 base-files_14 base-passwd_3.6.8 bash_5.3-1 binutils_2.45.50.20251209-1+b1 binutils-common_2.45.50.20251209-1+b1 binutils-gold_2.44-3 binutils-gold-x86-64-linux-gnu_2.44-3 binutils-x86-64-linux-gnu_2.45.50.20251209-1+b1 bsdextrautils_2.41.3-3 bsdutils_1:2.41.3-3 build-essential_12.12 bzip2_1.0.8-6+b1 coreutils_9.7-3 cpp_4:15.2.0-4 cpp-14_14.3.0-10 cpp-14-x86-64-linux-gnu_14.3.0-10 cpp-15_15.2.0-12 cpp-15-x86-64-linux-gnu_15.2.0-12 cpp-x86-64-linux-gnu_4:15.2.0-4 dash_0.5.12-12 debconf_1.5.91 debhelper_13.29 debian-archive-keyring_2025.1 debianutils_5.23.2 dh-autoreconf_21 dh-strip-nondeterminism_1.15.0-1 diffutils_1:3.12-1 dirmngr_2.4.8-5 dpkg_1.23.3 dpkg-dev_1.23.3 dwz_0.16-2 eatmydata_131-2 file_1:5.46-5+b1 findutils_4.10.0-3 g++_4:15.2.0-4 g++-14_14.3.0-10 g++-14-x86-64-linux-gnu_14.3.0-10 g++-15_15.2.0-12 g++-15-x86-64-linux-gnu_15.2.0-12 g++-x86-64-linux-gnu_4:15.2.0-4 gcc_4:15.2.0-4 gcc-14_14.3.0-10 gcc-14-base_14.3.0-10 gcc-14-x86-64-linux-gnu_14.3.0-10 gcc-15_15.2.0-12 gcc-15-base_15.2.0-12 gcc-15-x86-64-linux-gnu_15.2.0-12 gcc-x86-64-linux-gnu_4:15.2.0-4 gettext_0.23.2-1 gettext-base_0.23.2-1 gnupg_2.4.8-5 gnupg-l10n_2.4.8-5 gpg_2.4.8-5 gpg-agent_2.4.8-5 gpgconf_2.4.8-5 gpgsm_2.4.8-5 grep_3.12-1 groff-base_1.23.0-10 gzip_1.13-1 hostname_3.25 init-system-helpers_1.69 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-2+b2 libapt-pkg7.0_3.1.13 libarchive-zip-perl_1.68-1 libasan8_15.2.0-12 libassuan9_3.0.2-2+b1 libatomic1_15.2.0-12 libattr1_1:2.5.2-3+b1 libaudit-common_1:4.1.2-1 libaudit1_1:4.1.2-1+b1 libbinutils_2.45.50.20251209-1+b1 libblkid1_2.41.3-3 libbsd0_0.12.2-2+b1 libbz2-1.0_1.0.8-6+b1 libc-bin_2.42-9 libc-dev-bin_2.42-9 libc-gconv-modules-extra_2.42-9 libc-l10n_2.42-9 libc6_2.42-9 libc6-dev_2.42-9 libcap-ng0_0.8.5-4+b2 libcap2_1:2.75-10+b5 libcc1-0_15.2.0-12 libclass-inspector-perl_1.36-3 libcrypt-dev_1:4.5.1-1 libcrypt1_1:4.5.1-1 libctf-nobfd0_2.45.50.20251209-1+b1 libctf0_2.45.50.20251209-1+b1 libdb5.3t64_5.3.28+dfsg2-11 libdebconfclient0_0.282+b2 libdebhelper-perl_13.29 libdpkg-perl_1.23.3 libeatmydata1_131-2+b2 libelf1t64_0.194-1 libffi8_3.5.2-3+b1 libfile-sharedir-perl_1.118-3 libfile-stripnondeterminism-perl_1.15.0-1 libgcc-14-dev_14.3.0-10 libgcc-15-dev_15.2.0-12 libgcc-s1_15.2.0-12 libgcrypt20_1.11.2-3+b1 libgdbm-compat4t64_1.26-1+b1 libgdbm6t64_1.26-1+b1 libgmp10_2:6.3.0+dfsg-5+b1 libgnutls30t64_3.8.11-3 libgomp1_15.2.0-12 libgpg-error0_1.58-1+b1 libgprofng0_2.45.50.20251209-1+b1 libhogweed6t64_3.10.2-1 libhwasan0_15.2.0-12 libidn2-0_2.3.8-4+b1 libisl23_0.27-1+b1 libitm1_15.2.0-12 libjansson4_2.14-2+b4 libksba8_1.6.7-2+b2 liblastlog2-2_2.41.3-3 libldap2_2.6.10+dfsg-1+b1 liblsan0_15.2.0-12 liblz4-1_1.10.0-6 liblzma5_5.8.2-2 libmagic-mgc_1:5.46-5+b1 libmagic1t64_1:5.46-5+b1 libmd0_1.1.0-2+b2 libmount1_2.41.3-3 libmpc3_1.3.1-2+b1 libmpfr6_4.2.2-2+b1 libncursesw6_6.6+20251231-1 libnettle8t64_3.10.2-1 libnpth0t64_1.8-3+b1 libosp5_1.5.2-15.2 libp11-kit0_0.25.10-1+b1 libpam-modules_1.7.0-5+b1 libpam-modules-bin_1.7.0-5+b1 libpam-runtime_1.7.0-5 libpam0g_1.7.0-5+b1 libpcre2-8-0_10.46-1+b1 libperl5.40_5.40.1-7 libperl5.42_5.42.0-3 libpipeline1_1.5.8-2 libpod-parser-perl_1.67-1 libquadmath0_15.2.0-12 libreadline8t64_8.3-3+b1 libsasl2-2_2.1.28+dfsg1-10 libsasl2-modules-db_2.1.28+dfsg1-10 libseccomp2_2.6.0-2+b1 libselinux1_3.9-4+b1 libsemanage-common_3.9-1 libsemanage2_3.9-1+b1 libsepol2_3.9-2 libsframe2_2.45.50.20251209-1+b1 libsgmls-perl_1.03ii-38 libsmartcols1_2.41.3-3 libsqlite3-0_3.46.1-8 libssl3t64_3.5.4-1+b1 libstdc++-14-dev_14.3.0-10 libstdc++-15-dev_15.2.0-12 libstdc++6_15.2.0-12 libsyntax-keyword-try-perl_0.31-1+b1 libsystemd0_259-1 libtasn1-6_4.21.0-2 libtcl8.6_8.6.17+dfsg-1+b1 libtinfo6_6.6+20251231-1 libtool_2.5.4-9 libtsan2_15.2.0-12 libubsan1_15.2.0-12 libuchardet0_0.0.8-2+b1 libudev1_259-1 libunistring5_1.3-2+b1 libuuid1_2.41.3-3 libxml2-16_2.15.1+dfsg-2+b1 libxs-parse-keyword-perl_0.49-1+b1 libxxhash0_0.8.3-2+b1 libyaml-tiny-perl_1.76-1 libzstd1_1.5.7+dfsg-3+b1 linux-libc-dev_6.18.5-1 locales-all_2.42-9 login.defs_1:4.19.0-4 m4_1.4.20-2 make_4.4.1-3 man-db_2.13.1-1 mawk_1.3.4.20250131-2 ncurses-base_6.6+20251231-1 ncurses-bin_6.6+20251231-1 opensp_1.5.2-15.2 openssl-provider-legacy_3.5.4-1+b1 passwd_1:4.19.0-4 patch_2.8-2 perl_5.42.0-3 perl-base_5.42.0-3 perl-modules-5.40_5.40.1-7 perl-modules-5.42_5.42.0-3 pinentry-curses_1.3.2-3 po-debconf_1.0.22 po4a_0.74-1 readline-common_8.3-3 rpcsvc-proto_1.4.3-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2 sensible-utils_0.0.26 sgml-base_1.31+nmu1 sqv_1.3.0-5 sysvinit-utils_3.15-6 tar_1.35+dfsg-3.1 tcl_8.6.16 tcl8.6_8.6.17+dfsg-1+b1 tzdata_2025c-3 util-linux_2.41.3-3 xz-utils_5.8.2-2 zlib1g_1:1.3.dfsg+really1.3.1-1+b2 +------------------------------------------------------------------------------+ | Build Sun, 18 Jan 2026 18:39:11 +0000 | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 1.0 Source: dgit Binary: dgit, git-debrebase, git-debpush, dgit-infrastructure Architecture: all Version: 14.3 Maintainer: Debian tag2upload Delegates Uploaders: Ian Jackson , Sean Whitton Standards-Version: 4.4.0.0 Vcs-Browser: https://salsa.debian.org/dgit-team/dgit Vcs-Git: https://salsa.debian.org/dgit-team/dgit.git Testsuite: autopkgtest Testsuite-Triggers: autopkgtest, bc, bsdgames, build-essential, chiark-utils-bin, debhelper, devscripts, diffutils, dput-ng, fakeroot, faketime, git, git-buildpackage, git-man, gnupg, groff, jq, libhttp-server-simple-static-perl, libjson-perl, liblocale-gettext-perl, liburi-perl, locales-all, make, man-db, mpack, netcat-openbsd, patch, pristine-tar, python3, python3-pygit2, quilt, reprepro, rsync, sbuild, systemd, xz-utils Build-Depends: debhelper-compat (= 12), gettext, po4a, tcl Package-List: dgit deb devel optional arch=all dgit-infrastructure deb devel optional arch=all git-debpush deb devel optional arch=all git-debrebase deb devel optional arch=all Checksums-Sha1: ec4a757863d24d9dd684efa5133ebcb83b830ad3 1005954 dgit_14.3.tar.gz Checksums-Sha256: 8134ec36d0c2bd8a009a98c13c72c06020d06e99877aea7c580c175424653b54 1005954 dgit_14.3.tar.gz Files: b858cc11dbb4001da1ccc0f616d0efa2 1005954 dgit_14.3.tar.gz Dgit: 0f778f7af8eb934c998a060912e533a521886f77 debian archive/debian/14.3 https://git.dgit.debian.org/dgit Git-Tag-Info: tag=abfd365b10f48706511d872ed12bbc81344ae911 fp=9b917007ae030e36e4fc248b695b7ae4bf066240 Git-Tag-Tagger: Sean Whitton -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEN02M5NuW6cvUwJcqYG0ITkaDwHkFAmlro/wACgkQYG0ITkaD wHkNGBAAteqYhBVSVUQLsbes1d/1aIdjQ3hLyQbmXhdLBCWQz5ntE8wxsyO8vRPa VvNeyXo1f+R9ailRiIaWrsl4+D/dumd3YLf6JPlq4zjpHH/uAqL9Q/ERqQM7nspU C7pn6dl9EmR5WE6WC/2d6wnq8qI+OEuxY8GknZvNw9I8E30dKw58krBv3XZ5Q+iC 3UrG6CNT9YVjgQNMvHi5xqELsLgbN2LtWTNzMrbaHbVGPcaHt0Llfrklm543RTqs s+u9grP3alxwvKBM/Jkc/S2dhYQfdtOq+4yioiwtYkx31vQlx29BcrF73Yd3dHfq MHvrIGt2GtQyqSaUaTmsmE0oFfWIS/+vZ8ODUUSpgp+WzstREf9099drk9ar9eeJ geVpXBLPMsxxrvh86e/LOBhKGW5QCmsi0OwIbC+WHA5vRCQ895P7BAQO0QIilPao 75A4W03M8nmlLlpbNQNIIv2cUQQ3cvT/AlOphjkw9WOoJd5jlUO+5OXBfWk87xSg ZyazzMgmpS1du2RImSSt5jd8c/IbcvaV1oCRJ9Y+LLkzHiHI0vMiBBfsZEs5z6Ux QY3ThEaoJJ6amUuMhimEQuJLKCTrydSE+sqDk7U6W0iLGC2bKgFSRdD133UmnTDg g1MdyJomB9XUSWXxSMUiNBljjNu47j0RPVKN0IdOMvp88kGoIME= =AWLT -----END PGP SIGNATURE----- dpkg-source: warning: cannot verify inline signature for ./dgit_14.3.dsc: missing OpenPGP keyrings dpkg-source: info: verifying ./dgit_14.3.dsc dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-keyring.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-tag2upload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-nonupload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-maintainers.pgp dpkg-source: info: extracting dgit in /build/dgit-2Dfshv/dgit-14.3 dpkg-source: info: unpacking dgit_14.3.tar.gz clean up apt cache ------------------ Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Timed Build Commands Sun, 18 Jan 2026 18:39:12 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network dgit_14.3 perl-5.42-throwaway amd64 ---------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network dgit_14.3 perl-5.42-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/build/dgit-2Dfshv/dgit-14.3 SCHROOT_ALIAS_NAME=perl-5.42-throwaway-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.42-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.42-amd64-debomatic-22573138-018c-48ed-808e-f7fc23b2b4e6 SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc dpkg-buildpackage: info: source package dgit dpkg-buildpackage: info: source version 14.3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Sean Whitton dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 dpkg-source: warning: short option not allowed in dgit-14.3/debian/source/options, line 1 debian/rules clean dh clean debian/rules override_dh_auto_clean make[1]: Entering directory '/build/dgit-2Dfshv/dgit-14.3' dh_auto_clean make -j2 distclean make[2]: Entering directory '/build/dgit-2Dfshv/dgit-14.3' rm -rf tests/tmp substituted set -e; for m in dgit.1 dgit.7 dgit-user.7 dgit-nmu-simple.7 dgit-maint-native.7 dgit-maint-merge.7 dgit-maint-gbp.7 dgit-maint-debrebase.7 dgit-downstream-dsc.7 dgit-sponsorship.7 dgit-maint-bpo.7 git-debrebase.1 git-debrebase.5 git-debpush.1 git-deborig.1 tag2upload.5; do \ test -e $m.pod && rm -f $m; \ done make[2]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3' make -C po clean make[2]: Entering directory '/build/dgit-2Dfshv/dgit-14.3/po' rm -f .*.make .*.potfiles .*.pot .*.tmp rm -rf mo make[2]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3/po' make[1]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3' dh_clean dpkg-source -b . dpkg-source: warning: short option not allowed in dgit-14.3/debian/source/options, line 1 dpkg-source: warning: no source format specified in debian/source/format, see dpkg-source(1) dpkg-source: info: using source format '1.0' dpkg-source: info: building dgit in dgit_14.3.tar.gz dpkg-source: info: building dgit in dgit_14.3.dsc debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure dh_auto_build make -j2 INSTALL="install --strip-program=true" make[1]: Entering directory '/build/dgit-2Dfshv/dgit-14.3' m="dgit-user.7"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center=dgit \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ dgit-user.7.pod dgit-user.7 m="dgit-nmu-simple.7"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center=dgit \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ dgit-nmu-simple.7.pod dgit-nmu-simple.7 m="dgit-maint-native.7"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center=dgit \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ dgit-maint-native.7.pod dgit-maint-native.7 m="dgit-maint-merge.7"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center=dgit \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ dgit-maint-merge.7.pod dgit-maint-merge.7 m="dgit-maint-gbp.7"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center=dgit \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ dgit-maint-gbp.7.pod dgit-maint-gbp.7 m="dgit-maint-debrebase.7"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center=dgit \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ dgit-maint-debrebase.7.pod dgit-maint-debrebase.7 m="dgit-downstream-dsc.7"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center=dgit \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ dgit-downstream-dsc.7.pod dgit-downstream-dsc.7 m="dgit-sponsorship.7"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center=dgit \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ dgit-sponsorship.7.pod dgit-sponsorship.7 m="dgit-maint-bpo.7"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center=dgit \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ dgit-maint-bpo.7.pod dgit-maint-bpo.7 m="git-debrebase.1"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center="${m%.[0-9]}" \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ git-debrebase.1.pod git-debrebase.1 m="git-debrebase.5"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center="${m%.[0-9]}" \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ git-debrebase.5.pod git-debrebase.5 m="git-debpush.1"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center="${m%.[0-9]}" \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ git-debpush.1.pod git-debpush.1 m="git-deborig.1"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center="${m%.[0-9]}" \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ git-deborig.1.pod git-deborig.1 m="tag2upload.5"; pod2man --release="Debian Project" --date="dgit+tag2upload team" \ --center="${m%.[0-9]}" \ --name="${m%.[0-9]}" \ --section="${m##*.}" \ tag2upload.5.pod tag2upload.5 mkdir -p substituted mkdir -p substituted set -x; perl -pe 'next unless m/###substituted###/; s{\bundef\b}{'\''/usr/share/dgit'\''}; s{(?<=^sharedir=)\S+(?=\s)}{'/usr/share/dgit'};' \ substituted/dgit + perl -pe next unless m/###substituted###/; s{\bundef\b}{'/usr/share/dgit'}; s{(?<=^sharedir=)\S+(?=\s)}{/usr/share/dgit}; set -x; perl -pe 'next unless m/###substituted###/; s{\bundef\b}{'\''/usr/share/dgit'\''}; s{(?<=^sharedir=)\S+(?=\s)}{'/usr/share/dgit'};' \ substituted/git-playtree-setup + perl -pe next unless m/###substituted###/; s{\bundef\b}{'/usr/share/dgit'}; s{(?<=^sharedir=)\S+(?=\s)}{/usr/share/dgit}; mkdir -p substituted set -x; perl -pe 'next unless m/###substituted###/; s{\bundef\b}{'\''/usr/share/dgit'\''}; s{(?<=^sharedir=)\S+(?=\s)}{'/usr/share/dgit'};' \ substituted/mini-git-tag-fsck + perl -pe next unless m/###substituted###/; s{\bundef\b}{'/usr/share/dgit'}; s{(?<=^sharedir=)\S+(?=\s)}{/usr/share/dgit}; mkdir -p substituted set -x; perl -pe 'next unless m/###substituted###/; s{\bundef\b}{'\''/usr/share/dgit'\''}; s{(?<=^sharedir=)\S+(?=\s)}{'/usr/share/dgit'};' \ substituted/tag2upload-fetch-inputs + perl -pe next unless m/###substituted###/; s{\bundef\b}{'/usr/share/dgit'}; s{(?<=^sharedir=)\S+(?=\s)}{/usr/share/dgit}; mkdir -p substituted set -x; perl -pe 'next unless m/###substituted###/; s{\bundef\b}{'\''/usr/share/dgit'\''}; s{(?<=^sharedir=)\S+(?=\s)}{'/usr/share/dgit'};' \ substituted/tag2upload-obtain-origs + perl -pe next unless m/###substituted###/; s{\bundef\b}{'/usr/share/dgit'}; s{(?<=^sharedir=)\S+(?=\s)}{/usr/share/dgit}; make[1]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3' dh_auto_test create-stamp debian/debhelper-build-stamp dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/build/dgit-2Dfshv/dgit-14.3' make install-gdp prefix=/usr DESTDIR=debian/git-debpush perldir=/usr/share/dgit/gdp/perl5 make[2]: Entering directory '/build/dgit-2Dfshv/dgit-14.3' install -d debian/git-debpush/usr/bin \ debian/git-debpush/usr/share/man/man1 debian/git-debpush/usr/share/man/man5 \ debian/git-debpush/usr/share/dgit/gdp/perl5/Debian/ debian/git-debpush/usr/share/dgit/gdp/perl5/Debian/Dgit/ debian/git-debpush/usr/share/dgit/gdp/perl5/Debian/Dgit/ debian/git-debpush/usr/share/dgit/gdp/perl5/Debian/Dgit/ debian/git-debpush/usr/share/dgit/gdp/perl5/Debian/Dgit/ install -m 755 git-debpush git-deborig debian/git-debpush/usr/bin install -m 644 git-debpush.1 git-deborig.1 debian/git-debpush/usr/share/man/man1 install -m 644 tag2upload.5 debian/git-debpush/usr/share/man/man5 set -e; for m in Debian/Dgit/Core.pm Debian/Dgit/GDP.pm Debian/Dgit/I18n.pm; do \ install -m 644 $m debian/git-debpush/usr/share/dgit/gdp/perl5/${m%/*}; \ done make[2]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3' # # Most of the Perl modules in this package live in # # /usr/share/dgit/gdp/perl5. The exception is Debian::Dgit::Infra, which # # lives in /usr/share/perl5 and adds /usr/share/dgit/gdp/perl5 to @INC. # # We also abuse this for git-playtree-setup. In .debs, this # # goes in the per-.deb @INC dir. See Dgit.pm::playtree_setup. set -ex; base=debian/git-debpush; mod=Debian/Dgit/GDP.pm; src=${base}/usr/share/dgit/gdp/perl5/${mod}; dst=${base}/usr/share/perl5/${mod}; mkdir -p ${dst%/*}; mv -f $src $dst; install -m 755 git-playtree-setup ${base}/usr/share/dgit/gdp/perl5; perl -i -p -e 'next unless m/###substituted###/;' -e 'next unless s/^# (?=unshift \@INC,)//;' -e 'die unless s{q\{\S+\}}{q{/usr/share/dgit/gdp/perl5}};' $dst + base=debian/git-debpush + mod=Debian/Dgit/GDP.pm + src=debian/git-debpush/usr/share/dgit/gdp/perl5/Debian/Dgit/GDP.pm + dst=debian/git-debpush/usr/share/perl5/Debian/Dgit/GDP.pm + mkdir -p debian/git-debpush/usr/share/perl5/Debian/Dgit + mv -f debian/git-debpush/usr/share/dgit/gdp/perl5/Debian/Dgit/GDP.pm debian/git-debpush/usr/share/perl5/Debian/Dgit/GDP.pm + install -m 755 git-playtree-setup debian/git-debpush/usr/share/dgit/gdp/perl5 + perl -i -p -e next unless m/###substituted###/; -e next unless s/^# (?=unshift \@INC,)//; -e die unless s{q\{\S+\}}{q{/usr/share/dgit/gdp/perl5}}; debian/git-debpush/usr/share/perl5/Debian/Dgit/GDP.pm set -x; perl -i -pe 'next unless m/###substituted###/;' \ -e 's{^(git_playtree_setup)=.*}{$1=/usr/share/dgit/gdp/perl5/git-playtree-setup};' \ debian/git-debpush/usr/bin/* + perl -i -pe next unless m/###substituted###/; -e s{^(git_playtree_setup)=.*}{$1=/usr/share/dgit/gdp/perl5/git-playtree-setup}; debian/git-debpush/usr/bin/git-deborig debian/git-debpush/usr/bin/git-debpush make install-gdr prefix=/usr DESTDIR=debian/git-debrebase perldir=/usr/share/dgit/gdr/perl5 make[2]: Entering directory '/build/dgit-2Dfshv/dgit-14.3' install -d debian/git-debrebase/usr/bin \ debian/git-debrebase/usr/share/man/man1 debian/git-debrebase/usr/share/man/man5 \ debian/git-debrebase/usr/share/dgit/gdr/perl5/Debian/ debian/git-debrebase/usr/share/dgit/gdr/perl5/Debian/Dgit/ debian/git-debrebase/usr/share/dgit/gdr/perl5/Debian/Dgit/ debian/git-debrebase/usr/share/dgit/gdr/perl5/Debian/Dgit/ debian/git-debrebase/usr/share/dgit/gdr/perl5/Debian/Dgit/ install -m 755 git-debrebase debian/git-debrebase/usr/bin install -m 644 git-debrebase.1 debian/git-debrebase/usr/share/man/man1 install -m 644 git-debrebase.5 debian/git-debrebase/usr/share/man/man5 set -e; for m in Debian/Dgit.pm Debian/Dgit/Core.pm Debian/Dgit/GDR.pm Debian/Dgit/ExitStatus.pm Debian/Dgit/I18n.pm; do \ install -m 644 $m debian/git-debrebase/usr/share/dgit/gdr/perl5/${m%/*}; \ done make[2]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3' # # Most of the Perl modules in this package live in # # /usr/share/dgit/gdr/perl5. The exception is Debian::Dgit::Infra, which # # lives in /usr/share/perl5 and adds /usr/share/dgit/gdr/perl5 to @INC. # # We also abuse this for git-playtree-setup. In .debs, this # # goes in the per-.deb @INC dir. See Dgit.pm::playtree_setup. set -ex; base=debian/git-debrebase; mod=Debian/Dgit/GDR.pm; src=${base}/usr/share/dgit/gdr/perl5/${mod}; dst=${base}/usr/share/perl5/${mod}; mkdir -p ${dst%/*}; mv -f $src $dst; install -m 755 git-playtree-setup ${base}/usr/share/dgit/gdr/perl5; perl -i -p -e 'next unless m/###substituted###/;' -e 'next unless s/^# (?=unshift \@INC,)//;' -e 'die unless s{q\{\S+\}}{q{/usr/share/dgit/gdr/perl5}};' $dst + base=debian/git-debrebase + mod=Debian/Dgit/GDR.pm + src=debian/git-debrebase/usr/share/dgit/gdr/perl5/Debian/Dgit/GDR.pm + dst=debian/git-debrebase/usr/share/perl5/Debian/Dgit/GDR.pm + mkdir -p debian/git-debrebase/usr/share/perl5/Debian/Dgit + mv -f debian/git-debrebase/usr/share/dgit/gdr/perl5/Debian/Dgit/GDR.pm debian/git-debrebase/usr/share/perl5/Debian/Dgit/GDR.pm + install -m 755 git-playtree-setup debian/git-debrebase/usr/share/dgit/gdr/perl5 + perl -i -p -e next unless m/###substituted###/; -e next unless s/^# (?=unshift \@INC,)//; -e die unless s{q\{\S+\}}{q{/usr/share/dgit/gdr/perl5}}; debian/git-debrebase/usr/share/perl5/Debian/Dgit/GDR.pm make install-infra prefix=/usr DESTDIR=debian/dgit-infrastructure perldir=/usr/share/dgit/infra/perl5 make[2]: Entering directory '/build/dgit-2Dfshv/dgit-14.3' install -d debian/dgit-infrastructure/usr/bin \ debian/dgit-infrastructure/usr/share/doc/dgit-infrastructure/examples debian/dgit-infrastructure/usr/share/dgit-infrastructure/debian \ debian/dgit-infrastructure/usr/share/dgit/infra/perl5/Debian/ debian/dgit-infrastructure/usr/share/dgit/infra/perl5/Debian/Dgit/ debian/dgit-infrastructure/usr/share/dgit/infra/perl5/Debian/Dgit/ debian/dgit-infrastructure/usr/share/dgit/infra/perl5/Debian/Dgit/Policy/ debian/dgit-infrastructure/usr/share/dgit/infra/perl5/Debian/Dgit/ install -m 755 infra/dgit-repos-server infra/dgit-ssh-dispatch infra/dgit-mirror-ssh-wrap infra/dgit-repos-policy-debian infra/dgit-repos-admin-debian infra/dgit-repos-policy-trusting infra/dgit-mirror-rsync infra/tag2upload-oracled \ debian/dgit-infrastructure/usr/bin install -m 755 infra/get-dm-txt infra/ssh-wrap infra/drs-cron-wrap infra/get-suites \ debian/dgit-infrastructure/usr/share/doc/dgit-infrastructure/examples install -m 755 infra/get-dm-txt infra/tag2upload-builder-rebuild infra/tag2upload-oracle-crontab infra/tag2upload-builder-crontab \ debian/dgit-infrastructure/usr/share/dgit-infrastructure/debian set -e; for m in Debian/Dgit.pm Debian/Dgit/Core.pm Debian/Dgit/Infra.pm Debian/Dgit/Policy/Debian.pm Debian/Dgit/ProtoConn.pm; do \ install -m 644 $m debian/dgit-infrastructure/usr/share/dgit/infra/perl5/${m%/*}; \ done make[2]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3' # # Most of the Perl modules in this package live in # # /usr/share/dgit/infra/perl5. The exception is Debian::Dgit::Infra, which # # lives in /usr/share/perl5 and adds /usr/share/dgit/infra/perl5 to @INC. # # We also abuse this for git-playtree-setup. In .debs, this # # goes in the per-.deb @INC dir. See Dgit.pm::playtree_setup. set -ex; base=debian/dgit-infrastructure; mod=Debian/Dgit/Infra.pm; src=${base}/usr/share/dgit/infra/perl5/${mod}; dst=${base}/usr/share/perl5/${mod}; mkdir -p ${dst%/*}; mv -f $src $dst; install -m 755 git-playtree-setup ${base}/usr/share/dgit/infra/perl5; perl -i -p -e 'next unless m/###substituted###/;' -e 'next unless s/^# (?=unshift \@INC,)//;' -e 'die unless s{q\{\S+\}}{q{/usr/share/dgit/infra/perl5}};' $dst + base=debian/dgit-infrastructure + mod=Debian/Dgit/Infra.pm + src=debian/dgit-infrastructure/usr/share/dgit/infra/perl5/Debian/Dgit/Infra.pm + dst=debian/dgit-infrastructure/usr/share/perl5/Debian/Dgit/Infra.pm + mkdir -p debian/dgit-infrastructure/usr/share/perl5/Debian/Dgit + mv -f debian/dgit-infrastructure/usr/share/dgit/infra/perl5/Debian/Dgit/Infra.pm debian/dgit-infrastructure/usr/share/perl5/Debian/Dgit/Infra.pm + install -m 755 git-playtree-setup debian/dgit-infrastructure/usr/share/dgit/infra/perl5 + perl -i -p -e next unless m/###substituted###/; -e next unless s/^# (?=unshift \@INC,)//; -e die unless s{q\{\S+\}}{q{/usr/share/dgit/infra/perl5}}; debian/dgit-infrastructure/usr/share/perl5/Debian/Dgit/Infra.pm make install prefix=/usr DESTDIR=debian/dgit make[2]: Entering directory '/build/dgit-2Dfshv/dgit-14.3' install -d debian/dgit/usr/bin \ debian/dgit/usr/share/man/man1 debian/dgit/usr/share/man/man5 \ debian/dgit/usr/share/man/man7 \ debian/dgit/usr/share/doc/dgit debian/dgit/usr/share/dgit/absurd \ debian/dgit/usr/share/perl5/Debian/ debian/dgit/usr/share/perl5/Debian/Dgit/ debian/dgit/usr/share/perl5/Debian/Dgit/ debian/dgit/usr/share/perl5/Debian/Dgit/ debian/dgit/usr/share/perl5/Debian/Dgit/ install -m 755 substituted/dgit substituted/git-playtree-setup substituted/mini-git-tag-fsck substituted/tag2upload-fetch-inputs substituted/tag2upload-obtain-origs \ debian/dgit/usr/bin install -m 755 absurd/git \ debian/dgit/usr/share/dgit/absurd install -m 644 dgit-functions.sh debian/dgit/usr/share/dgit install -m 644 dgit.1 debian/dgit/usr/share/man/man1 install -m 644 dgit.7 dgit-user.7 dgit-nmu-simple.7 dgit-maint-native.7 dgit-maint-merge.7 dgit-maint-gbp.7 dgit-maint-debrebase.7 dgit-downstream-dsc.7 dgit-sponsorship.7 dgit-maint-bpo.7 debian/dgit/usr/share/man/man7 install -m 644 README.dsc-import debian/dgit/usr/share/doc/dgit set -e; for m in Debian/Dgit.pm Debian/Dgit/Core.pm Debian/Dgit/ExitStatus.pm Debian/Dgit/I18n.pm Debian/Dgit/ProtoConn.pm; do \ install -m 644 $m debian/dgit/usr/share/perl5/${m%/*}; \ done make[2]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3' make -C po install prefix=/usr DESTDIR=../debian/tmp \ SUPPRESS_PO_UPDATE=1 S='' make[2]: Entering directory '/build/dgit-2Dfshv/dgit-14.3/po' set -e; exec >.dgit.potfiles.tmp; echo ../dgit; mv -f .dgit.potfiles.tmp .dgit.potfiles set -e; exec >.dgit.make.tmp; \ sed 's/~/dgit/g' part.make; \ sed "s#^#.dgit.pot: #" .dgit.potfiles; \ mv -f .dgit.make.tmp .dgit.make set -e; exec >.git-debrebase.potfiles.tmp; echo ../git-debrebase; mv -f .git-debrebase.potfiles.tmp .git-debrebase.potfiles set -e; exec >.git-debrebase.make.tmp; \ sed 's/~/git-debrebase/g' part.make; \ sed "s#^#.git-debrebase.pot: #" .git-debrebase.potfiles; \ mv -f .git-debrebase.make.tmp .git-debrebase.make set -e; exec >.common.potfiles.tmp; find ../Debian -name \*.pm; mv -f .common.potfiles.tmp .common.potfiles set -e; exec >.common.make.tmp; \ sed 's/~/common/g' part.make; \ sed "s#^#.common.pot: #" .common.potfiles; \ mv -f .common.make.tmp .common.make TZ=UTC xgettext -Lperl -k__ -kf_ -ki_ --from-code=UTF-8 --package-name=dgit --package-version=ongoing ../dgit -o .dgit.pot.tmp && mv -f .dgit.pot.tmp .dgit.pot TZ=UTC xgettext -Lperl -k__ -kf_ -ki_ --from-code=UTF-8 --package-name=dgit --package-version=ongoing ../Debian/Dgit/GDP.pm ../Debian/Dgit/GDR.pm ../Debian/Dgit/I18n.pm ../Debian/Dgit/Infra.pm ../Debian/Dgit/ProtoConn.pm ../Debian/Dgit/Core.pm ../Debian/Dgit/Policy/Debian.pm ../Debian/Dgit/ExitStatus.pm ../Debian/Dgit.pm -o .common.pot.tmp && mv -f .common.pot.tmp .common.pot mkdir -p mo msgcat .dgit.pot .common.pot >mo/dgit.pot.tmp && mv -f mo/dgit.pot.tmp mo/dgit.pot cp en_US.po mo/dgit_en_US.po.tmp msgmerge --quiet --previous mo/dgit_en_US.po.tmp mo/dgit.pot -o mo/dgit_en_US.po.tmp mv -f mo/dgit_en_US.po.tmp mo/dgit_en_US.po msgfmt -o mo/dgit_en_US.mo mo/dgit_en_US.po cp nl.po mo/dgit_nl.po.tmp msgmerge --quiet --previous mo/dgit_nl.po.tmp mo/dgit.pot -o mo/dgit_nl.po.tmp mv -f mo/dgit_nl.po.tmp mo/dgit_nl.po msgfmt -o mo/dgit_nl.mo mo/dgit_nl.po cp pt.po mo/dgit_pt.po.tmp msgmerge --quiet --previous mo/dgit_pt.po.tmp mo/dgit.pot -o mo/dgit_pt.po.tmp mv -f mo/dgit_pt.po.tmp mo/dgit_pt.po msgfmt -o mo/dgit_pt.mo mo/dgit_pt.po TZ=UTC xgettext -Lperl -k__ -kf_ -ki_ --from-code=UTF-8 --package-name=dgit --package-version=ongoing ../git-debrebase -o .git-debrebase.pot.tmp && mv -f .git-debrebase.pot.tmp .git-debrebase.pot mkdir -p mo msgcat .git-debrebase.pot .common.pot >mo/git-debrebase.pot.tmp && mv -f mo/git-debrebase.pot.tmp mo/git-debrebase.pot cp en_US.po mo/git-debrebase_en_US.po.tmp msgmerge --quiet --previous mo/git-debrebase_en_US.po.tmp mo/git-debrebase.pot -o mo/git-debrebase_en_US.po.tmp mv -f mo/git-debrebase_en_US.po.tmp mo/git-debrebase_en_US.po msgfmt -o mo/git-debrebase_en_US.mo mo/git-debrebase_en_US.po cp nl.po mo/git-debrebase_nl.po.tmp msgmerge --quiet --previous mo/git-debrebase_nl.po.tmp mo/git-debrebase.pot -o mo/git-debrebase_nl.po.tmp mv -f mo/git-debrebase_nl.po.tmp mo/git-debrebase_nl.po msgfmt -o mo/git-debrebase_nl.mo mo/git-debrebase_nl.po cp pt.po mo/git-debrebase_pt.po.tmp msgmerge --quiet --previous mo/git-debrebase_pt.po.tmp mo/git-debrebase.pot -o mo/git-debrebase_pt.po.tmp mv -f mo/git-debrebase_pt.po.tmp mo/git-debrebase_pt.po msgfmt -o mo/git-debrebase_pt.mo mo/git-debrebase_pt.po Generated mo/*.mo (binary translated messages) OK. set -e; for file in mo/dgit_en_US.mo mo/dgit_nl.mo mo/dgit_pt.mo mo/git-debrebase_en_US.mo mo/git-debrebase_nl.mo mo/git-debrebase_pt.mo; do \ lang=${file#*_}; lang=${lang%.mo}; \ part=${file#mo/}; part=${part%%_*}; \ d=../debian/tmp/usr/share/locale/$lang/LC_MESSAGES; \ install -d $d; \ install -m 0644 $file $d/$part.mo; \ done make[2]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3/po' mv debian/dgit/usr/bin/git-playtree-setup debian/dgit/usr/share/dgit make -C po4a install DESTDIR=../debian/tmp S='' make[2]: Entering directory '/build/dgit-2Dfshv/dgit-14.3/po4a' ./pairwise-pocheck pairwise-pocheck dgit-downstream-dsc_7.pt.po ok. pairwise-pocheck dgit-maint-bpo_7.pt.po ok. pairwise-pocheck dgit-maint-debrebase_7.pt.po ok. pairwise-pocheck dgit-maint-gbp_7.pt.po ok. pairwise-pocheck dgit-maint-merge_7.pt.po ok. pairwise-pocheck dgit-maint-native_7.pt.po ok. pairwise-pocheck dgit-nmu-simple_7.pt.po ok. pairwise-pocheck dgit-sponsorship_7.pt.po ok. pairwise-pocheck dgit-user_7.nl.po ok. pairwise-pocheck dgit-user_7.pt.po ok. pairwise-pocheck dgit_1.pt.po ok. pairwise-pocheck dgit_7.pt.po ok. pairwise-pocheck git-deborig_1.de.po ok. pairwise-pocheck git-deborig_1.fr.po ok. pairwise-pocheck git-deborig_1.pt.po ok. pairwise-pocheck git-debpush_1.pt.po ok. pairwise-pocheck git-debrebase_1.pt.po ok. pairwise-pocheck git-debrebase_5.pt.po ok. pairwise-pocheck tag2upload_5.pt.po ok. rm -rf ../.po4a.translated-only && mkdir ../.po4a.translated-only cd ../.po4a.translated-only && ln -s ../po4a/*.po ../po4a/*.pot ../po4a/po4a.cfg . cd ../.po4a.translated-only && po4a po4a.cfg po4a.cfg:7: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:8: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:9: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:10: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:11: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:12: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:13: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:14: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:15: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:16: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:17: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:18: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:19: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:20: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:21: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a.cfg:22: Option 'master:file=' is deprecated. Please use 'pot=' instead for the same effect. po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! (1762 entries) Discard translated/man/de/man1/dgit.1 (0 of 522 strings; only 0% translated; need 10%). Discard translated/man/de/man7/dgit.7 (0 of 113 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man7/dgit-user.7.pod (0 of 91 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man7/dgit-nmu-simple.7.pod (0 of 37 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man7/dgit-maint-native.7.pod (0 of 25 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man7/dgit-maint-merge.7.pod (0 of 123 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man7/dgit-maint-gbp.7.pod (0 of 40 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man7/dgit-maint-debrebase.7.pod (0 of 191 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man7/dgit-downstream-dsc.7.pod (0 of 88 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man7/dgit-sponsorship.7.pod (0 of 78 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man7/dgit-maint-bpo.7.pod (0 of 40 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man1/git-debrebase.1.pod (0 of 164 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man5/git-debrebase.5.pod (0 of 145 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man1/git-debpush.1.pod (0 of 124 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/de/man5/tag2upload.5.pod (0 of 96 strings; only 0% translated; need 10%). Discard translated/man/fr/man1/dgit.1 (0 of 522 strings; only 0% translated; need 10%). Discard translated/man/fr/man7/dgit.7 (0 of 113 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man7/dgit-user.7.pod (0 of 91 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man7/dgit-nmu-simple.7.pod (0 of 37 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man7/dgit-maint-native.7.pod (0 of 25 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man7/dgit-maint-merge.7.pod (0 of 123 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man7/dgit-maint-gbp.7.pod (0 of 40 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man7/dgit-maint-debrebase.7.pod (0 of 191 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man7/dgit-downstream-dsc.7.pod (0 of 88 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man7/dgit-sponsorship.7.pod (0 of 78 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man7/dgit-maint-bpo.7.pod (0 of 40 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man1/git-debrebase.1.pod (0 of 164 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man5/git-debrebase.5.pod (0 of 145 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man1/git-debpush.1.pod (0 of 124 strings; only 0% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/fr/man5/tag2upload.5.pod (0 of 96 strings; only 0% translated; need 10%). Discard translated/man/nl/man1/dgit.1 (2 of 522 strings; only 0.38% translated; need 10%). Discard translated/man/nl/man7/dgit.7 (3 of 113 strings; only 2.65% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/nl/man7/dgit-nmu-simple.7.pod (3 of 37 strings; only 8.1% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/nl/man7/dgit-maint-merge.7.pod (3 of 123 strings; only 2.43% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/nl/man7/dgit-maint-debrebase.7.pod (3 of 191 strings; only 1.57% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/nl/man7/dgit-downstream-dsc.7.pod (3 of 88 strings; only 3.4% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/nl/man7/dgit-sponsorship.7.pod (2 of 78 strings; only 2.56% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/nl/man7/dgit-maint-bpo.7.pod (3 of 40 strings; only 7.5% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/nl/man1/git-debrebase.1.pod (2 of 164 strings; only 1.21% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/nl/man5/git-debrebase.5.pod (3 of 145 strings; only 2.06% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/nl/man1/git-debpush.1.pod (2 of 124 strings; only 1.61% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/nl/man1/git-deborig.1.pod (2 of 23 strings; only 8.69% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard translated/man/nl/man5/tag2upload.5.pod (3 of 96 strings; only 3.12% translated; need 10%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! ! test -d ../.po4a.translated-only/translated || \ cp -al --remove-destination ../.po4a.translated-only/translated . ./install-documents translated ../debian/tmp man/de/man1/git-deborig.1 man/pt/man1/git-deborig.1 man/pt/man1/git-debrebase.1 man/pt/man1/git-debpush.1 man/pt/man1/dgit.1 man/pt/man5/git-debrebase.5 man/pt/man5/tag2upload.5 man/pt/man7/dgit-sponsorship.7 man/pt/man7/dgit-maint-merge.7 man/pt/man7/dgit-maint-native.7 man/pt/man7/dgit-maint-gbp.7 man/pt/man7/dgit.7 man/pt/man7/dgit-nmu-simple.7 man/pt/man7/dgit-downstream-dsc.7 man/pt/man7/dgit-maint-bpo.7 man/pt/man7/dgit-user.7 man/pt/man7/dgit-maint-debrebase.7 man/fr/man1/git-deborig.1 man/nl/man7/dgit-maint-native.7 man/nl/man7/dgit-maint-gbp.7 man/nl/man7/dgit-user.7 + make -s -C translated -f ../../Makefile man/de/man1/git-deborig.1 man/pt/man1/git-deborig.1 man/pt/man1/git-debrebase.1 man/pt/man1/git-debpush.1 man/pt/man1/dgit.1 man/pt/man5/git-debrebase.5 man/pt/man5/tag2upload.5 man/pt/man7/dgit-sponsorship.7 man/pt/man7/dgit-maint-merge.7 man/pt/man7/dgit-maint-native.7 man/pt/man7/dgit-maint-gbp.7 man/pt/man7/dgit.7 man/pt/man7/dgit-nmu-simple.7 man/pt/man7/dgit-downstream-dsc.7 man/pt/man7/dgit-maint-bpo.7 man/pt/man7/dgit-user.7 man/pt/man7/dgit-maint-debrebase.7 man/fr/man1/git-deborig.1 man/nl/man7/dgit-maint-native.7 man/nl/man7/dgit-maint-gbp.7 man/nl/man7/dgit-user.7 + cp translated/man/de/man1/git-deborig.1 ../debian/tmp/usr/share/man/de/man1/git-deborig.1 + cp translated/man/pt/man1/git-deborig.1 ../debian/tmp/usr/share/man/pt/man1/git-deborig.1 + cp translated/man/pt/man1/git-debrebase.1 ../debian/tmp/usr/share/man/pt/man1/git-debrebase.1 + cp translated/man/pt/man1/git-debpush.1 ../debian/tmp/usr/share/man/pt/man1/git-debpush.1 + cp translated/man/pt/man1/dgit.1 ../debian/tmp/usr/share/man/pt/man1/dgit.1 + cp translated/man/pt/man5/git-debrebase.5 ../debian/tmp/usr/share/man/pt/man5/git-debrebase.5 + cp translated/man/pt/man5/tag2upload.5 ../debian/tmp/usr/share/man/pt/man5/tag2upload.5 + cp translated/man/pt/man7/dgit-sponsorship.7 ../debian/tmp/usr/share/man/pt/man7/dgit-sponsorship.7 + cp translated/man/pt/man7/dgit-maint-merge.7 ../debian/tmp/usr/share/man/pt/man7/dgit-maint-merge.7 + cp translated/man/pt/man7/dgit-maint-native.7 ../debian/tmp/usr/share/man/pt/man7/dgit-maint-native.7 + cp translated/man/pt/man7/dgit-maint-gbp.7 ../debian/tmp/usr/share/man/pt/man7/dgit-maint-gbp.7 + cp translated/man/pt/man7/dgit.7 ../debian/tmp/usr/share/man/pt/man7/dgit.7 + cp translated/man/pt/man7/dgit-nmu-simple.7 ../debian/tmp/usr/share/man/pt/man7/dgit-nmu-simple.7 + cp translated/man/pt/man7/dgit-downstream-dsc.7 ../debian/tmp/usr/share/man/pt/man7/dgit-downstream-dsc.7 + cp translated/man/pt/man7/dgit-maint-bpo.7 ../debian/tmp/usr/share/man/pt/man7/dgit-maint-bpo.7 + cp translated/man/pt/man7/dgit-user.7 ../debian/tmp/usr/share/man/pt/man7/dgit-user.7 + cp translated/man/pt/man7/dgit-maint-debrebase.7 ../debian/tmp/usr/share/man/pt/man7/dgit-maint-debrebase.7 + cp translated/man/fr/man1/git-deborig.1 ../debian/tmp/usr/share/man/fr/man1/git-deborig.1 + cp translated/man/nl/man7/dgit-maint-native.7 ../debian/tmp/usr/share/man/nl/man7/dgit-maint-native.7 + cp translated/man/nl/man7/dgit-maint-gbp.7 ../debian/tmp/usr/share/man/nl/man7/dgit-maint-gbp.7 + cp translated/man/nl/man7/dgit-user.7 ../debian/tmp/usr/share/man/nl/man7/dgit-user.7 make[2]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3/po4a' make[1]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3' dh_install dh_installdocs dh_installchangelogs dh_installman debian/rules override_dh_installsystemduser make[1]: Entering directory '/build/dgit-2Dfshv/dgit-14.3' DH_COMPAT=14 \ dh_installsystemduser --name=tag2upload-oracled --no-enable make[1]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3' dh_lintian dh_perl dh_link dh_strip_nondeterminism Normalized debian/dgit/usr/share/locale/en_US/LC_MESSAGES/dgit.mo Normalized debian/dgit/usr/share/locale/pt/LC_MESSAGES/dgit.mo Normalized debian/dgit/usr/share/locale/nl/LC_MESSAGES/dgit.mo Normalized debian/git-debrebase/usr/share/locale/pt/LC_MESSAGES/git-debrebase.mo Normalized debian/git-debrebase/usr/share/locale/nl/LC_MESSAGES/git-debrebase.mo Normalized debian/git-debrebase/usr/share/locale/en_US/LC_MESSAGES/git-debrebase.mo dh_compress dh_fixperms debian/rules override_dh_missing make[1]: Entering directory '/build/dgit-2Dfshv/dgit-14.3' dh_missing --fail-missing make[1]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3' dh_installdeb debian/rules override_dh_gencontrol make[1]: Entering directory '/build/dgit-2Dfshv/dgit-14.3' dh_gencontrol dpkg-gencontrol: warning: package git-debpush: substitution variable ${perl:Depends} unused, but is defined dpkg-gencontrol: warning: package dgit: substitution variable ${perl:Depends} unused, but is defined dpkg-gencontrol: warning: package dgit-infrastructure: substitution variable ${perl:Depends} unused, but is defined dpkg-gencontrol: warning: package git-debrebase: substitution variable ${perl:Depends} unused, but is defined set -e; \ cd debian; \ v=$(perl -ne 'print if s/^version:\s+//i' dgit/DEBIAN/control); \ perl -i -pe "s/UNRELEASED/$v/g if m/###substituted###/" \ dgit/usr/bin/dgit \ dgit-infrastructure/usr/bin/tag2upload-oracled make[1]: Leaving directory '/build/dgit-2Dfshv/dgit-14.3' dh_md5sums dh_builddeb dpkg-deb: building package 'git-debpush' in '../git-debpush_14.3_all.deb'. dpkg-deb: building package 'dgit' in '../dgit_14.3_all.deb'. dpkg-deb: building package 'dgit-infrastructure' in '../dgit-infrastructure_14.3_all.deb'. dpkg-deb: building package 'git-debrebase' in '../git-debrebase_14.3_all.deb'. dpkg-genbuildinfo -O../dgit_14.3_amd64.buildinfo dpkg-genchanges -O../dgit_14.3_amd64.changes dpkg-genchanges: info: including full source code in upload dpkg-source --after-build . dpkg-source: warning: short option not allowed in dgit-14.3/debian/source/options, line 1 dpkg-buildpackage: info: full upload; Debian-native package (full source is included) -------------------------------------------------------------------------------- Build finished at 2026-01-18T18:39:32Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes Sun, 18 Jan 2026 18:39:32 +0000 | +------------------------------------------------------------------------------+ dgit_14.3_amd64.changes: ------------------------ Format: 1.8 Date: Sat, 17 Jan 2026 14:58:07 +0000 Source: dgit Binary: dgit dgit-infrastructure git-debpush git-debrebase Architecture: source all Version: 14.3 Distribution: perl-5.42-throwaway Urgency: medium Maintainer: Debian tag2upload Delegates Changed-By: Sean Whitton Description: dgit - git interoperability with the Debian archive dgit-infrastructure - dgit server backend infrastructure git-debpush - client script for git pushing to Debian-style archives git-debrebase - rebasing git workflow tool for Debian packaging Closes: 1111233 1112106 1125493 1125499 Changes: dgit (14.3) unstable; urgency=medium . tag2upload development [Ian Jackson]: * Make some failures retriable: - when 'dgit download-unfetched-origs' fails to query the archive (e.g. a connection timeout) - when regenerating the orig fails but the correct one might become available via the archive later - when fetching from salsa fails with a HTTP 500 series error Closes: #1112106. * Use actual job status in email Subject. Main change is that users will see "irrecoverable" instead of "failed". * Define o2m protocol version 8 to convey software versions. * Include the last attempt message on in the summary, not the transcript. * tag2upload-obtain-origs: Fix an argument checking bug. * When running tag2upload-* scripts fails, put script name in the report. * Supporting internal changes, including breaking out a new script 'tag2upload-fetch-inputs'. . tag2upload-oracled: * New --version option. . Documentation: * dgit-maint-{debrebase,merge,gbp,native}(7): Say to upload with git-debpush. * dgit-maint-bpo(7), dgit-sponsorship(7), dgit-nmu-simple(7): Mention git-debpush where appropriate. * dgit-maint-{debrebase,merge}(7): Always push to salsa. * dgit-maint-debrebase(7): Recommend 'git debrebase quick', not 'git debrebase', right before uploading. Closes: #1111233. * dgit(1): Fix a formatting error. [Ian Jackson] . i18n [Américo Monteiro]: * pt: New translation for dgit's messages. Closes: #1125493. * pt: Updated dgit(1), dgit-downstream-dsc(7). Closes: #1125499. . Test suite [Ian Jackson]: * t2u-email: Add bounds so that we detect text added to beginning and end. * t2u: When grepping e-mails, grep only the body parts. * http-static-server: Yield better HTTP status codes. Checksums-Sha1: 8933ce3b7bcf16e5e3b50e4bb3b2eddbad9daae4 1363 dgit_14.3.dsc 2d693760145d7982de5521b8a4bf5d1fa8f68523 1005968 dgit_14.3.tar.gz 774912e3ddf9d3adf470a8bf2ec308781a727005 88592 dgit-infrastructure_14.3_all.deb fd54ebd41493ecb770b4a5ced606a95b730daacd 313480 dgit_14.3_all.deb ce481c27b8f8e23e81f4b201fbfbfaec389bdd70 6297 dgit_14.3_amd64.buildinfo 5788c23726c1c91eb01a015a5586d05989204b81 78428 git-debpush_14.3_all.deb aa188ad16dd75802258dd93e9fb02d5e69521633 111960 git-debrebase_14.3_all.deb Checksums-Sha256: e568c60c2c022e37e607f3927fa3e403ac805d94aef5aa903e4bcc19746a4802 1363 dgit_14.3.dsc ad574c33de551a3176657cba18736f301a9e290546d5dcab685ad66f984f02a0 1005968 dgit_14.3.tar.gz e358d7ff70d7f0c0fc7b11f1b707077e44aaad97b01168f933c90c7dda90dbe8 88592 dgit-infrastructure_14.3_all.deb 70baa4cc5be6a963f1d860cc71e20dac008359571a4d0b9ea417405e74ca1c0a 313480 dgit_14.3_all.deb aa00645875f8c74868c6e7fd150a9246aea7634b8a103d601f0ab2d37eb625b8 6297 dgit_14.3_amd64.buildinfo d2345efd94dd6d90cf53ed1022a3cd88cfaabfea963496868a4562b5845aa2d0 78428 git-debpush_14.3_all.deb 7fdad13609e2fd582b244a6ecf165ca7e1d5b0d0dd668d372b23f3622a07aab6 111960 git-debrebase_14.3_all.deb Files: 93e5e43e5dc8a487f5778428a3f3046f 1363 devel optional dgit_14.3.dsc 9cb9b48f6422e3411a32e6c942593f03 1005968 devel optional dgit_14.3.tar.gz e749f48914d9bbc4b9b8df450e04930d 88592 devel optional dgit-infrastructure_14.3_all.deb bbed2cc774acf1fd5fc110e3cf54545d 313480 devel optional dgit_14.3_all.deb a4624f473e39d1e9a60418927d025d94 6297 devel optional dgit_14.3_amd64.buildinfo be2920d18a7f7f08d92468ed3a1acb71 78428 devel optional git-debpush_14.3_all.deb a0e040d92ead060155de8729fae57b94 111960 devel optional git-debrebase_14.3_all.deb +------------------------------------------------------------------------------+ | Buildinfo Sun, 18 Jan 2026 18:39:32 +0000 | +------------------------------------------------------------------------------+ Format: 1.0 Source: dgit Binary: dgit dgit-infrastructure git-debpush git-debrebase Architecture: all source Version: 14.3 Checksums-Md5: 93e5e43e5dc8a487f5778428a3f3046f 1363 dgit_14.3.dsc e749f48914d9bbc4b9b8df450e04930d 88592 dgit-infrastructure_14.3_all.deb bbed2cc774acf1fd5fc110e3cf54545d 313480 dgit_14.3_all.deb be2920d18a7f7f08d92468ed3a1acb71 78428 git-debpush_14.3_all.deb a0e040d92ead060155de8729fae57b94 111960 git-debrebase_14.3_all.deb Checksums-Sha1: 8933ce3b7bcf16e5e3b50e4bb3b2eddbad9daae4 1363 dgit_14.3.dsc 774912e3ddf9d3adf470a8bf2ec308781a727005 88592 dgit-infrastructure_14.3_all.deb fd54ebd41493ecb770b4a5ced606a95b730daacd 313480 dgit_14.3_all.deb 5788c23726c1c91eb01a015a5586d05989204b81 78428 git-debpush_14.3_all.deb aa188ad16dd75802258dd93e9fb02d5e69521633 111960 git-debrebase_14.3_all.deb Checksums-Sha256: e568c60c2c022e37e607f3927fa3e403ac805d94aef5aa903e4bcc19746a4802 1363 dgit_14.3.dsc e358d7ff70d7f0c0fc7b11f1b707077e44aaad97b01168f933c90c7dda90dbe8 88592 dgit-infrastructure_14.3_all.deb 70baa4cc5be6a963f1d860cc71e20dac008359571a4d0b9ea417405e74ca1c0a 313480 dgit_14.3_all.deb d2345efd94dd6d90cf53ed1022a3cd88cfaabfea963496868a4562b5845aa2d0 78428 git-debpush_14.3_all.deb 7fdad13609e2fd582b244a6ecf165ca7e1d5b0d0dd668d372b23f3622a07aab6 111960 git-debrebase_14.3_all.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Sun, 18 Jan 2026 18:39:32 +0000 Build-Path: /build/dgit-2Dfshv/dgit-14.3 Build-Tainted-By: usr-local-has-programs Installed-Build-Depends: autoconf (= 2.72-3.1), automake (= 1:1.18.1-3), autopoint (= 0.23.2-1), autotools-dev (= 20240727.1), base-files (= 14), base-passwd (= 3.6.8), bash (= 5.3-1), binutils (= 2.45.50.20251209-1+b1), binutils-common (= 2.45.50.20251209-1+b1), binutils-x86-64-linux-gnu (= 2.45.50.20251209-1+b1), bsdextrautils (= 2.41.3-3), build-essential (= 12.12), bzip2 (= 1.0.8-6+b1), coreutils (= 9.7-3), cpp (= 4:15.2.0-4), cpp-14 (= 14.3.0-10), cpp-14-x86-64-linux-gnu (= 14.3.0-10), cpp-15 (= 15.2.0-12), cpp-15-x86-64-linux-gnu (= 15.2.0-12), cpp-x86-64-linux-gnu (= 4:15.2.0-4), dash (= 0.5.12-12), debconf (= 1.5.91), debhelper (= 13.29), debianutils (= 5.23.2), dh-autoreconf (= 21), dh-strip-nondeterminism (= 1.15.0-1), diffutils (= 1:3.12-1), dpkg (= 1.23.3), dpkg-dev (= 1.23.3), dwz (= 0.16-2), file (= 1:5.46-5+b1), findutils (= 4.10.0-3), g++ (= 4:15.2.0-4), g++-15 (= 15.2.0-12), g++-15-x86-64-linux-gnu (= 15.2.0-12), g++-x86-64-linux-gnu (= 4:15.2.0-4), gcc (= 4:15.2.0-4), gcc-14 (= 14.3.0-10), gcc-14-base (= 14.3.0-10), gcc-14-x86-64-linux-gnu (= 14.3.0-10), gcc-15 (= 15.2.0-12), gcc-15-base (= 15.2.0-12), gcc-15-x86-64-linux-gnu (= 15.2.0-12), gcc-x86-64-linux-gnu (= 4:15.2.0-4), gettext (= 0.23.2-1), gettext-base (= 0.23.2-1), grep (= 3.12-1), groff-base (= 1.23.0-10), gzip (= 1.13-1), hostname (= 3.25), init-system-helpers (= 1.69), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.3.2-2+b2), libarchive-zip-perl (= 1.68-1), libasan8 (= 15.2.0-12), libatomic1 (= 15.2.0-12), libattr1 (= 1:2.5.2-3+b1), libaudit-common (= 1:4.1.2-1), libaudit1 (= 1:4.1.2-1+b1), libbinutils (= 2.45.50.20251209-1+b1), libblkid1 (= 2.41.3-3), libbz2-1.0 (= 1.0.8-6+b1), libc-bin (= 2.42-9), libc-dev-bin (= 2.42-9), libc-gconv-modules-extra (= 2.42-9), libc6 (= 2.42-9), libc6-dev (= 2.42-9), libcap-ng0 (= 0.8.5-4+b2), libcap2 (= 1:2.75-10+b5), libcc1-0 (= 15.2.0-12), libclass-inspector-perl (= 1.36-3), libcrypt1 (= 1:4.5.1-1), libctf-nobfd0 (= 2.45.50.20251209-1+b1), libctf0 (= 2.45.50.20251209-1+b1), libdb5.3t64 (= 5.3.28+dfsg2-11), libdebconfclient0 (= 0.282+b2), libdebhelper-perl (= 13.29), libdpkg-perl (= 1.23.3), libelf1t64 (= 0.194-1), libfile-sharedir-perl (= 1.118-3), libfile-stripnondeterminism-perl (= 1.15.0-1), libgcc-14-dev (= 14.3.0-10), libgcc-15-dev (= 15.2.0-12), libgcc-s1 (= 15.2.0-12), libgdbm-compat4t64 (= 1.26-1+b1), libgdbm6t64 (= 1.26-1+b1), libgmp10 (= 2:6.3.0+dfsg-5+b1), libgomp1 (= 15.2.0-12), libgprofng0 (= 2.45.50.20251209-1+b1), libhwasan0 (= 15.2.0-12), libisl23 (= 0.27-1+b1), libitm1 (= 15.2.0-12), libjansson4 (= 2.14-2+b4), liblsan0 (= 15.2.0-12), liblzma5 (= 5.8.2-2), libmagic-mgc (= 1:5.46-5+b1), libmagic1t64 (= 1:5.46-5+b1), libmd0 (= 1.1.0-2+b2), libmount1 (= 2.41.3-3), libmpc3 (= 1.3.1-2+b1), libmpfr6 (= 4.2.2-2+b1), libosp5 (= 1.5.2-15.2), libpam-modules (= 1.7.0-5+b1), libpam-modules-bin (= 1.7.0-5+b1), libpam-runtime (= 1.7.0-5), libpam0g (= 1.7.0-5+b1), libpcre2-8-0 (= 10.46-1+b1), libperl5.42 (= 5.42.0-3), libpipeline1 (= 1.5.8-2), libpod-parser-perl (= 1.67-1), libquadmath0 (= 15.2.0-12), libseccomp2 (= 2.6.0-2+b1), libselinux1 (= 3.9-4+b1), libsframe2 (= 2.45.50.20251209-1+b1), libsgmls-perl (= 1.03ii-38), libsmartcols1 (= 2.41.3-3), libssl3t64 (= 3.5.4-1+b1), libstdc++-15-dev (= 15.2.0-12), libstdc++6 (= 15.2.0-12), libsyntax-keyword-try-perl (= 0.31-1+b1), libsystemd0 (= 259-1), libtcl8.6 (= 8.6.17+dfsg-1+b1), libtinfo6 (= 6.6+20251231-1), libtool (= 2.5.4-9), libtsan2 (= 15.2.0-12), libubsan1 (= 15.2.0-12), libuchardet0 (= 0.0.8-2+b1), libudev1 (= 259-1), libunistring5 (= 1.3-2+b1), libuuid1 (= 2.41.3-3), libxml2-16 (= 2.15.1+dfsg-2+b1), libxs-parse-keyword-perl (= 0.49-1+b1), libyaml-tiny-perl (= 1.76-1), libzstd1 (= 1.5.7+dfsg-3+b1), linux-libc-dev (= 6.18.5-1), m4 (= 1.4.20-2), make (= 4.4.1-3), man-db (= 2.13.1-1), mawk (= 1.3.4.20250131-2), ncurses-base (= 6.6+20251231-1), ncurses-bin (= 6.6+20251231-1), opensp (= 1.5.2-15.2), openssl-provider-legacy (= 3.5.4-1+b1), patch (= 2.8-2), perl (= 5.42.0-3), perl-base (= 5.42.0-3), perl-modules-5.42 (= 5.42.0-3), po-debconf (= 1.0.22), po4a (= 0.74-1), rpcsvc-proto (= 1.4.3-1), sed (= 4.9-2), sensible-utils (= 0.0.26), sgml-base (= 1.31+nmu1), sysvinit-utils (= 3.15-6), tar (= 1.35+dfsg-3.1), tcl (= 8.6.16), tcl8.6 (= 8.6.17+dfsg-1+b1), tzdata (= 2025c-3), util-linux (= 2.41.3-3), xz-utils (= 5.8.2-2), zlib1g (= 1:1.3.dfsg+really1.3.1-1+b2) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LANGUAGE="en_GB:en" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" LD_PRELOAD="libeatmydata.so" SOURCE_DATE_EPOCH="1768661887" +------------------------------------------------------------------------------+ | Package contents Sun, 18 Jan 2026 18:39:32 +0000 | +------------------------------------------------------------------------------+ dgit-infrastructure_14.3_all.deb -------------------------------- new Debian package, version 2.0. size 88592 bytes: control archive=2280 bytes. 646 bytes, 14 lines control 2041 bytes, 26 lines md5sums 1670 bytes, 34 lines * postinst #!/bin/sh 755 bytes, 17 lines * postrm #!/bin/sh 268 bytes, 7 lines * prerm #!/bin/sh Package: dgit-infrastructure Source: dgit Version: 14.3 Architecture: all Maintainer: Debian tag2upload Delegates Installed-Size: 265 Depends: init-system-helpers (>= 1.66~), perl, git-core, gpgv, chiark-utils-bin, libjson-perl, libdigest-sha-perl, libdbd-sqlite3-perl, sqlite3, libdpkg-perl, liburi-perl, libmime-tools-perl, liblocale-gettext-perl Recommends: dgit (>= 11.7~) Section: devel Priority: optional Description: dgit server backend infrastructure This package contains tools which are useful for setting up a dgit git depository. You probably want dgit, the client package, instead of dgit-infrastructure. drwxr-xr-x root/root 0 2026-01-17 14:58 ./ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/bin/ -rwxr-xr-x root/root 3713 2026-01-17 14:58 ./usr/bin/dgit-mirror-rsync -rwxr-xr-x root/root 1174 2026-01-17 14:58 ./usr/bin/dgit-mirror-ssh-wrap -rwxr-xr-x root/root 6065 2026-01-17 14:58 ./usr/bin/dgit-repos-admin-debian -rwxr-xr-x root/root 20581 2026-01-17 14:58 ./usr/bin/dgit-repos-policy-debian -rwxr-xr-x root/root 1093 2026-01-17 14:58 ./usr/bin/dgit-repos-policy-trusting -rwxr-xr-x root/root 78077 2026-01-17 14:58 ./usr/bin/dgit-repos-server -rwxr-xr-x root/root 5279 2026-01-17 14:58 ./usr/bin/dgit-ssh-dispatch -rwxr-xr-x root/root 21861 2026-01-17 14:58 ./usr/bin/tag2upload-oracled drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/lib/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/lib/systemd/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/lib/systemd/user/ -rw-r--r-- root/root 3519 2026-01-17 14:58 ./usr/lib/systemd/user/tag2upload-oracled.service drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit-infrastructure/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit-infrastructure/debian/ -rwxr-xr-x root/root 457 2026-01-17 14:58 ./usr/share/dgit-infrastructure/debian/get-dm-txt -rwxr-xr-x root/root 422 2026-01-17 14:58 ./usr/share/dgit-infrastructure/debian/tag2upload-builder-crontab -rwxr-xr-x root/root 3980 2026-01-17 14:58 ./usr/share/dgit-infrastructure/debian/tag2upload-builder-rebuild -rwxr-xr-x root/root 538 2026-01-17 14:58 ./usr/share/dgit-infrastructure/debian/tag2upload-oracle-crontab drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/infra/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/infra/perl5/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/infra/perl5/Debian/ -rw-r--r-- root/root 30944 2026-01-17 14:58 ./usr/share/dgit/infra/perl5/Debian/Dgit.pm drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/infra/perl5/Debian/Dgit/ -rw-r--r-- root/root 8838 2026-01-17 14:58 ./usr/share/dgit/infra/perl5/Debian/Dgit/Core.pm drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/infra/perl5/Debian/Dgit/Policy/ -rw-r--r-- root/root 715 2026-01-17 14:58 ./usr/share/dgit/infra/perl5/Debian/Dgit/Policy/Debian.pm -rw-r--r-- root/root 6520 2026-01-17 14:58 ./usr/share/dgit/infra/perl5/Debian/Dgit/ProtoConn.pm -rwxr-xr-x root/root 1212 2026-01-17 14:58 ./usr/share/dgit/infra/perl5/git-playtree-setup drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/doc/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/doc/dgit-infrastructure/ -rw-r--r-- root/root 25556 2026-01-17 14:58 ./usr/share/doc/dgit-infrastructure/changelog.gz -rw-r--r-- root/root 4417 2026-01-17 14:58 ./usr/share/doc/dgit-infrastructure/copyright drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/doc/dgit-infrastructure/examples/ -rwxr-xr-x root/root 286 2026-01-17 14:58 ./usr/share/doc/dgit-infrastructure/examples/drs-cron-wrap -rwxr-xr-x root/root 457 2026-01-17 14:58 ./usr/share/doc/dgit-infrastructure/examples/get-dm-txt -rwxr-xr-x root/root 653 2026-01-17 14:58 ./usr/share/doc/dgit-infrastructure/examples/get-suites -rwxr-xr-x root/root 213 2026-01-17 14:58 ./usr/share/doc/dgit-infrastructure/examples/ssh-wrap drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/lintian/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/lintian/overrides/ -rw-r--r-- root/root 135 2026-01-17 14:58 ./usr/share/lintian/overrides/dgit-infrastructure drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/perl5/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/perl5/Debian/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/perl5/Debian/Dgit/ -rw-r--r-- root/root 530 2026-01-17 14:58 ./usr/share/perl5/Debian/Dgit/Infra.pm dgit_14.3_all.deb ----------------- new Debian package, version 2.0. size 313480 bytes: control archive=1984 bytes. 846 bytes, 17 lines control 3138 bytes, 44 lines md5sums Package: dgit Version: 14.3 Architecture: all Maintainer: Debian tag2upload Delegates Installed-Size: 721 Depends: perl, libdpkg-perl, git-core, devscripts, dpkg-dev, git-buildpackage, liblist-moreutils-perl, liblocale-gettext-perl, coreutils (>= 8.23-1~), libdigest-sha-perl, dput, curl, apt, libjson-perl, ca-certificates, libtext-iconv-perl, libtext-glob-perl, libwww-curl-perl, libtext-csv-perl, python3 Recommends: ssh-client, distro-info-data, liburi-perl Suggests: sbuild | pbuilder | cowbuilder Section: devel Priority: optional Description: git interoperability with the Debian archive dgit (with the associated infrastructure) makes it possible to treat the Debian archive as a git repository. . dgit push constructs uploads from git commits . dgit clone and dgit fetch construct git commits from uploads. drwxr-xr-x root/root 0 2026-01-17 14:58 ./ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/bin/ -rwxr-xr-x root/root 279518 2026-01-17 14:58 ./usr/bin/dgit -rwxr-xr-x root/root 18579 2026-01-17 14:58 ./usr/bin/mini-git-tag-fsck -rwxr-xr-x root/root 3081 2026-01-17 14:58 ./usr/bin/tag2upload-fetch-inputs -rwxr-xr-x root/root 2461 2026-01-17 14:58 ./usr/bin/tag2upload-obtain-origs drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/absurd/ -rwxr-xr-x root/root 2764 2026-01-17 14:58 ./usr/share/dgit/absurd/git -rw-r--r-- root/root 682 2026-01-17 14:58 ./usr/share/dgit/dgit-functions.sh -rwxr-xr-x root/root 1212 2026-01-17 14:58 ./usr/share/dgit/git-playtree-setup drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/doc/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/doc/dgit/ -rw-r--r-- root/root 1880 2026-01-17 14:58 ./usr/share/doc/dgit/README.dsc-import.gz -rw-r--r-- root/root 25555 2026-01-17 14:58 ./usr/share/doc/dgit/changelog.gz -rw-r--r-- root/root 4417 2026-01-17 14:58 ./usr/share/doc/dgit/copyright drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/lintian/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/lintian/overrides/ -rw-r--r-- root/root 98 2026-01-17 14:58 ./usr/share/lintian/overrides/dgit drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/en_US/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/en_US/LC_MESSAGES/ -rw-r--r-- root/root 380 2026-01-17 14:58 ./usr/share/locale/en_US/LC_MESSAGES/dgit.mo drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/nl/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/nl/LC_MESSAGES/ -rw-r--r-- root/root 70870 2026-01-17 14:58 ./usr/share/locale/nl/LC_MESSAGES/dgit.mo drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/pt/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/pt/LC_MESSAGES/ -rw-r--r-- root/root 69506 2026-01-17 14:58 ./usr/share/locale/pt/LC_MESSAGES/dgit.mo drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/man1/ -rw-r--r-- root/root 20426 2026-01-17 14:58 ./usr/share/man/man1/dgit.1.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/man5/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/man7/ -rw-r--r-- root/root 5586 2026-01-17 14:58 ./usr/share/man/man7/dgit-downstream-dsc.7.gz -rw-r--r-- root/root 2623 2026-01-17 14:58 ./usr/share/man/man7/dgit-maint-bpo.7.gz -rw-r--r-- root/root 9349 2026-01-17 14:58 ./usr/share/man/man7/dgit-maint-debrebase.7.gz -rw-r--r-- root/root 2686 2026-01-17 14:58 ./usr/share/man/man7/dgit-maint-gbp.7.gz -rw-r--r-- root/root 6224 2026-01-17 14:58 ./usr/share/man/man7/dgit-maint-merge.7.gz -rw-r--r-- root/root 1762 2026-01-17 14:58 ./usr/share/man/man7/dgit-maint-native.7.gz -rw-r--r-- root/root 3371 2026-01-17 14:58 ./usr/share/man/man7/dgit-nmu-simple.7.gz -rw-r--r-- root/root 4504 2026-01-17 14:58 ./usr/share/man/man7/dgit-sponsorship.7.gz -rw-r--r-- root/root 6300 2026-01-17 14:58 ./usr/share/man/man7/dgit-user.7.gz -rw-r--r-- root/root 7752 2026-01-17 14:58 ./usr/share/man/man7/dgit.7.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/nl/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/nl/man7/ -rw-r--r-- root/root 2662 2026-01-17 14:58 ./usr/share/man/nl/man7/dgit-maint-gbp.7.gz -rw-r--r-- root/root 1751 2026-01-17 14:58 ./usr/share/man/nl/man7/dgit-maint-native.7.gz -rw-r--r-- root/root 7100 2026-01-17 14:58 ./usr/share/man/nl/man7/dgit-user.7.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/pt/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/pt/man1/ -rw-r--r-- root/root 22057 2026-01-17 14:58 ./usr/share/man/pt/man1/dgit.1.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/pt/man7/ -rw-r--r-- root/root 6016 2026-01-17 14:58 ./usr/share/man/pt/man7/dgit-downstream-dsc.7.gz -rw-r--r-- root/root 2826 2026-01-17 14:58 ./usr/share/man/pt/man7/dgit-maint-bpo.7.gz -rw-r--r-- root/root 9907 2026-01-17 14:58 ./usr/share/man/pt/man7/dgit-maint-debrebase.7.gz -rw-r--r-- root/root 2863 2026-01-17 14:58 ./usr/share/man/pt/man7/dgit-maint-gbp.7.gz -rw-r--r-- root/root 6674 2026-01-17 14:58 ./usr/share/man/pt/man7/dgit-maint-merge.7.gz -rw-r--r-- root/root 1888 2026-01-17 14:58 ./usr/share/man/pt/man7/dgit-maint-native.7.gz -rw-r--r-- root/root 3641 2026-01-17 14:58 ./usr/share/man/pt/man7/dgit-nmu-simple.7.gz -rw-r--r-- root/root 4868 2026-01-17 14:58 ./usr/share/man/pt/man7/dgit-sponsorship.7.gz -rw-r--r-- root/root 6654 2026-01-17 14:58 ./usr/share/man/pt/man7/dgit-user.7.gz -rw-r--r-- root/root 8575 2026-01-17 14:58 ./usr/share/man/pt/man7/dgit.7.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/perl5/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/perl5/Debian/ -rw-r--r-- root/root 30944 2026-01-17 14:58 ./usr/share/perl5/Debian/Dgit.pm drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/perl5/Debian/Dgit/ -rw-r--r-- root/root 8838 2026-01-17 14:58 ./usr/share/perl5/Debian/Dgit/Core.pm -rw-r--r-- root/root 477 2026-01-17 14:58 ./usr/share/perl5/Debian/Dgit/ExitStatus.pm -rw-r--r-- root/root 662 2026-01-17 14:58 ./usr/share/perl5/Debian/Dgit/I18n.pm -rw-r--r-- root/root 6520 2026-01-17 14:58 ./usr/share/perl5/Debian/Dgit/ProtoConn.pm git-debpush_14.3_all.deb ------------------------ new Debian package, version 2.0. size 78428 bytes: control archive=1288 bytes. 947 bytes, 23 lines control 1129 bytes, 16 lines md5sums Package: git-debpush Source: dgit Version: 14.3 Architecture: all Maintainer: Debian tag2upload Delegates Installed-Size: 143 Depends: git, gpg, gpg-agent, libdpkg-perl Replaces: devscripts (<< 2.25.18) Section: devel Priority: optional Description: client script for git pushing to Debian-style archives git-debpush is a script to create and push a specially formatted signed git tag. The metadata in the tag indicates that the tagged commit should be pushed (or "uploaded") to a Debian-style archive. . Tags generated by this script can be read by an intermediary service, which performs any conversion that's needed (such as producing and signing a .dsc and .changes), and then uploads the result to the Debian-style archive on your behalf. . This package also ships git-deborig, a program which tries to produce Debian orig.tar using git-archive(1). (This program used to be in the 'devscripts' package.) drwxr-xr-x root/root 0 2026-01-17 14:58 ./ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/bin/ -rwxr-xr-x root/root 6322 2026-01-17 14:58 ./usr/bin/git-deborig -rwxr-xr-x root/root 35795 2026-01-17 14:58 ./usr/bin/git-debpush drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/gdp/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/gdp/perl5/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/gdp/perl5/Debian/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/gdp/perl5/Debian/Dgit/ -rw-r--r-- root/root 8838 2026-01-17 14:58 ./usr/share/dgit/gdp/perl5/Debian/Dgit/Core.pm -rw-r--r-- root/root 662 2026-01-17 14:58 ./usr/share/dgit/gdp/perl5/Debian/Dgit/I18n.pm -rwxr-xr-x root/root 1212 2026-01-17 14:58 ./usr/share/dgit/gdp/perl5/git-playtree-setup drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/doc/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/doc/git-debpush/ -rw-r--r-- root/root 25556 2026-01-17 14:58 ./usr/share/doc/git-debpush/changelog.gz -rw-r--r-- root/root 4417 2026-01-17 14:58 ./usr/share/doc/git-debpush/copyright drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/de/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/de/man1/ -rw-r--r-- root/root 2060 2026-01-17 14:58 ./usr/share/man/de/man1/git-deborig.1.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/fr/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/fr/man1/ -rw-r--r-- root/root 1997 2026-01-17 14:58 ./usr/share/man/fr/man1/git-deborig.1.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/man1/ -rw-r--r-- root/root 1802 2026-01-17 14:58 ./usr/share/man/man1/git-deborig.1.gz -rw-r--r-- root/root 5615 2026-01-17 14:58 ./usr/share/man/man1/git-debpush.1.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/man5/ -rw-r--r-- root/root 5406 2026-01-17 14:58 ./usr/share/man/man5/tag2upload.5.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/pt/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/pt/man1/ -rw-r--r-- root/root 1905 2026-01-17 14:58 ./usr/share/man/pt/man1/git-deborig.1.gz -rw-r--r-- root/root 5958 2026-01-17 14:58 ./usr/share/man/pt/man1/git-debpush.1.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/pt/man5/ -rw-r--r-- root/root 5817 2026-01-17 14:58 ./usr/share/man/pt/man5/tag2upload.5.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/perl5/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/perl5/Debian/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/perl5/Debian/Dgit/ -rw-r--r-- root/root 806 2026-01-17 14:58 ./usr/share/perl5/Debian/Dgit/GDP.pm git-debrebase_14.3_all.deb -------------------------- new Debian package, version 2.0. size 111960 bytes: control archive=1128 bytes. 604 bytes, 16 lines control 1213 bytes, 16 lines md5sums Package: git-debrebase Source: dgit Version: 14.3 Architecture: all Maintainer: Debian tag2upload Delegates Installed-Size: 277 Depends: perl, git-core, libdpkg-perl, libfile-fnmatch-perl, devscripts, liblocale-gettext-perl Recommends: dgit, git-buildpackage Section: devel Priority: optional Description: rebasing git workflow tool for Debian packaging git-debrebase is a tool for representing in git, and manipulating, Debian packages based on upstream source code. . git-debrebase is an alternative to workflows including git-dpm, gbp pq, and direct use of quilt patches. drwxr-xr-x root/root 0 2026-01-17 14:58 ./ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/bin/ -rwxr-xr-x root/root 95635 2026-01-17 14:58 ./usr/bin/git-debrebase drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/gdr/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/gdr/perl5/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/gdr/perl5/Debian/ -rw-r--r-- root/root 30944 2026-01-17 14:58 ./usr/share/dgit/gdr/perl5/Debian/Dgit.pm drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/dgit/gdr/perl5/Debian/Dgit/ -rw-r--r-- root/root 8838 2026-01-17 14:58 ./usr/share/dgit/gdr/perl5/Debian/Dgit/Core.pm -rw-r--r-- root/root 477 2026-01-17 14:58 ./usr/share/dgit/gdr/perl5/Debian/Dgit/ExitStatus.pm -rw-r--r-- root/root 662 2026-01-17 14:58 ./usr/share/dgit/gdr/perl5/Debian/Dgit/I18n.pm -rwxr-xr-x root/root 1212 2026-01-17 14:58 ./usr/share/dgit/gdr/perl5/git-playtree-setup drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/doc/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/doc/git-debrebase/ -rw-r--r-- root/root 25556 2026-01-17 14:58 ./usr/share/doc/git-debrebase/changelog.gz -rw-r--r-- root/root 4417 2026-01-17 14:58 ./usr/share/doc/git-debrebase/copyright drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/en_US/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/en_US/LC_MESSAGES/ -rw-r--r-- root/root 532 2026-01-17 14:58 ./usr/share/locale/en_US/LC_MESSAGES/git-debrebase.mo drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/nl/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/nl/LC_MESSAGES/ -rw-r--r-- root/root 23036 2026-01-17 14:58 ./usr/share/locale/nl/LC_MESSAGES/git-debrebase.mo drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/pt/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/locale/pt/LC_MESSAGES/ -rw-r--r-- root/root 22503 2026-01-17 14:58 ./usr/share/locale/pt/LC_MESSAGES/git-debrebase.mo drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/man1/ -rw-r--r-- root/root 7929 2026-01-17 14:58 ./usr/share/man/man1/git-debrebase.1.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/man5/ -rw-r--r-- root/root 8189 2026-01-17 14:58 ./usr/share/man/man5/git-debrebase.5.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/pt/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/pt/man1/ -rw-r--r-- root/root 8514 2026-01-17 14:58 ./usr/share/man/pt/man1/git-debrebase.1.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/man/pt/man5/ -rw-r--r-- root/root 8716 2026-01-17 14:58 ./usr/share/man/pt/man5/git-debrebase.5.gz drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/perl5/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/perl5/Debian/ drwxr-xr-x root/root 0 2026-01-17 14:58 ./usr/share/perl5/Debian/Dgit/ -rw-r--r-- root/root 810 2026-01-17 14:58 ./usr/share/perl5/Debian/Dgit/GDR.pm +------------------------------------------------------------------------------+ | Post Build Sun, 18 Jan 2026 18:39:33 +0000 | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup Sun, 18 Jan 2026 18:39:33 +0000 | +------------------------------------------------------------------------------+ Purging /build/dgit-2Dfshv Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary Sun, 18 Jan 2026 18:39:34 +0000 | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 13048 Build-Time: 20 Distribution: perl-5.42-throwaway Host Architecture: amd64 Install-Time: 6 Job: /srv/debomatic/incoming/dgit_14.3.dsc Machine Architecture: amd64 Package: dgit Package-Time: 31 Source-Version: 14.3 Space: 13048 Status: successful Version: 14.3 -------------------------------------------------------------------------------- Finished at 2026-01-18T18:39:32Z Build needed 00:00:31, 13048k disk space