sbuild (Debian sbuild) 0.91.9 (05 May 2026) on carme.larted.org.uk +==============================================================================+ | debhelper 14.1 (amd64) Wed, 17 Jun 2026 00:01:37 +0000 | +==============================================================================+ Package: debhelper Version: 14.1 Source Version: 14.1 Distribution: perl-5.42-throwaway Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: Setting up the chroot... I: Creating chroot session... I: Setting up log color... +------------------------------------------------------------------------------+ | Chroot Setup Commands Wed, 17 Jun 2026 00:01:38 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup debhelper_14.1 perl-5.42-throwaway amd64 --------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup debhelper_14.1 perl-5.42-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: Setting up apt archive... +------------------------------------------------------------------------------+ | Update chroot Wed, 17 Jun 2026 00:01:38 +0000 | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.42 InRelease [3042 B] Get:1 file:/srv/reprepro perl-5.42 InRelease [3042 B] Hit:2 http://deb.debian.org/debian unstable InRelease Hit:3 http://deb.debian.org/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files Wed, 17 Jun 2026 00:01:40 +0000 | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/debhelper_14.1.dsc exists in /srv/debomatic/incoming; copying to chroot +------------------------------------------------------------------------------+ | Install package build dependencies Wed, 17 Jun 2026 00:01:40 +0000 | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: dpkg-dev (>= 1.18.0~), perl:any, po4a, build-essential Filtered Build-Depends: dpkg-dev (>= 1.18.0~), perl:any, po4a, build-essential dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/build/debhelper-74j5aY/resolver-7b6oCu/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/build/debhelper-74j5aY/resolver-7b6oCu/apt_archive ./ InRelease Get:2 copy:/build/debhelper-74j5aY/resolver-7b6oCu/apt_archive ./ Release [609 B] Ign:3 copy:/build/debhelper-74j5aY/resolver-7b6oCu/apt_archive ./ Release.gpg Get:4 copy:/build/debhelper-74j5aY/resolver-7b6oCu/apt_archive ./ Sources [701 B] Get:5 copy:/build/debhelper-74j5aY/resolver-7b6oCu/apt_archive ./ Packages [653 B] Fetched 1963 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: gettext gettext-base libclass-inspector-perl libfile-sharedir-perl libosp5 libpod-parser-perl libsgmls-perl libsyntax-keyword-try-perl libxml2-16 libxs-parse-keyword-perl libyaml-tiny-perl opensp po4a sgml-base Suggested packages: autopoint gettext-doc libasprintf-dev libgettextpo-dev gnulib-l10n sgmlspl sgmls-doc doc-base sgml-data sgml-base-doc Recommended packages: curl | wget | lynx python3:any liblocale-gettext-perl libterm-readkey-perl libtext-wrapi18n-perl libunicode-linebreak-perl The following NEW packages will be installed: gettext gettext-base libclass-inspector-perl libfile-sharedir-perl libosp5 libpod-parser-perl libsgmls-perl libsyntax-keyword-try-perl libxml2-16 libxs-parse-keyword-perl libyaml-tiny-perl opensp po4a sbuild-build-depends-main-dummy sgml-base 0 upgraded, 15 newly installed, 0 to remove and 0 not upgraded. Need to get 7866 kB/7960 kB of archives. After this operation, 33.2 MB of additional disk space will be used. Get:1 file:/srv/reprepro perl-5.42/main amd64 libxs-parse-keyword-perl amd64 0.49-1+b1 [66.2 kB] Get:2 copy:/build/debhelper-74j5aY/resolver-7b6oCu/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [864 B] Get:3 file:/srv/reprepro perl-5.42/main amd64 libsyntax-keyword-try-perl amd64 0.31-1+b1 [27.2 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 1.0-1 [332 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.15.3+dfsg-1 [642 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 gettext amd64 1.0-1 [2660 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 libclass-inspector-perl all 1.36-3 [17.5 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 libfile-sharedir-perl all 1.118-3 [16.0 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 libosp5 amd64 1.5.2-15.2 [972 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 libpod-parser-perl all 1.67-1 [94.1 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 libsgmls-perl all 1.03ii-38 [23.7 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 libyaml-tiny-perl all 1.76-1 [29.8 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 sgml-base all 1.31+nmu1 [10.9 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 opensp amd64 1.5.2-15.2 [448 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 po4a all 0.74-1 [2619 kB] Fetched 7866 kB in 0s (23.7 MB/s) Selecting previously unselected package gettext-base. (Reading database ... 23427 files and directories currently installed.) Preparing to unpack .../00-gettext-base_1.0-1_amd64.deb ... Unpacking gettext-base (1.0-1) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../01-libxml2-16_2.15.3+dfsg-1_amd64.deb ... Unpacking libxml2-16:amd64 (2.15.3+dfsg-1) ... Selecting previously unselected package gettext. Preparing to unpack .../02-gettext_1.0-1_amd64.deb ... Unpacking gettext (1.0-1) ... Selecting previously unselected package libclass-inspector-perl. Preparing to unpack .../03-libclass-inspector-perl_1.36-3_all.deb ... Unpacking libclass-inspector-perl (1.36-3) ... Selecting previously unselected package libfile-sharedir-perl. Preparing to unpack .../04-libfile-sharedir-perl_1.118-3_all.deb ... Unpacking libfile-sharedir-perl (1.118-3) ... Selecting previously unselected package libosp5. Preparing to unpack .../05-libosp5_1.5.2-15.2_amd64.deb ... Unpacking libosp5 (1.5.2-15.2) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../06-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libsgmls-perl. Preparing to unpack .../07-libsgmls-perl_1.03ii-38_all.deb ... Unpacking libsgmls-perl (1.03ii-38) ... Selecting previously unselected package libxs-parse-keyword-perl. Preparing to unpack .../08-libxs-parse-keyword-perl_0.49-1+b1_amd64.deb ... Unpacking libxs-parse-keyword-perl (0.49-1+b1) ... Selecting previously unselected package libsyntax-keyword-try-perl. Preparing to unpack .../09-libsyntax-keyword-try-perl_0.31-1+b1_amd64.deb ... Unpacking libsyntax-keyword-try-perl (0.31-1+b1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../10-libyaml-tiny-perl_1.76-1_all.deb ... Unpacking libyaml-tiny-perl (1.76-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../11-sgml-base_1.31+nmu1_all.deb ... Unpacking sgml-base (1.31+nmu1) ... Selecting previously unselected package opensp. Preparing to unpack .../12-opensp_1.5.2-15.2_amd64.deb ... Unpacking opensp (1.5.2-15.2) ... Selecting previously unselected package po4a. Preparing to unpack .../13-po4a_0.74-1_all.deb ... Unpacking po4a (0.74-1) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../14-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libsgmls-perl (1.03ii-38) ... Setting up libclass-inspector-perl (1.36-3) ... Setting up libxml2-16:amd64 (2.15.3+dfsg-1) ... Setting up gettext-base (1.0-1) ... Setting up libyaml-tiny-perl (1.76-1) ... Setting up libosp5 (1.5.2-15.2) ... Setting up libpod-parser-perl (1.67-1) ... Setting up libfile-sharedir-perl (1.118-3) ... Setting up sgml-base (1.31+nmu1) ... Setting up gettext (1.0-1) ... Setting up opensp (1.5.2-15.2) ... Setting up libxs-parse-keyword-perl (0.49-1+b1) ... Setting up libsyntax-keyword-try-perl (0.31-1+b1) ... Setting up po4a (0.74-1) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.42-16) ... +------------------------------------------------------------------------------+ | Check architectures Wed, 17 Jun 2026 00:01:45 +0000 | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Build environment Wed, 17 Jun 2026 00:01:45 +0000 | +------------------------------------------------------------------------------+ Kernel: Linux 7.0.10+deb14-amd64 #1 SMP PREEMPT_DYNAMIC Debian 7.0.10-1 (2026-05-27) amd64 (x86_64) Toolchain package versions: binutils_2.46.50.20260608-1 dpkg-dev_1.23.7 g++-14_14.3.0-15 g++-15_15.3.0-1 gcc-14_14.3.0-15 gcc-15_15.3.0-1 libc6-dev_2.42-16 libstdc++-14-dev_14.3.0-15 libstdc++-15-dev_15.3.0-1 libstdc++6_16.1.0-2 linux-libc-dev_7.0.12-2 Package versions: adduser_3.156 apt_3.3.1 base-files_14.2 base-passwd_3.6.8 bash_5.3-3 binutils_2.46.50.20260608-1 binutils-common_2.46.50.20260608-1 binutils-gold_2.44-3 binutils-gold-x86-64-linux-gnu_2.44-3 binutils-x86-64-linux-gnu_2.46.50.20260608-1 bsdutils_1:2.42.1-5 build-essential_12.12 bzip2_1.0.8-6+b2 coreutils_9.10-1 cpp_4:15.2.0-5+b1 cpp-14_14.3.0-15 cpp-14-x86-64-linux-gnu_14.3.0-15 cpp-15_15.3.0-1 cpp-15-x86-64-linux-gnu_15.3.0-1 cpp-x86-64-linux-gnu_4:15.2.0-5+b1 dash_0.5.12-12 debconf_1.5.92 debian-archive-keyring_2025.1 debianutils_5.23.2 diffutils_1:3.12-1 dirmngr_2.4.9-4 dpkg_1.23.7 dpkg-dev_1.23.7 eatmydata_131-2 findutils_4.10.0-4 g++_4:15.2.0-5+b1 g++-14_14.3.0-15 g++-14-x86-64-linux-gnu_14.3.0-15 g++-15_15.3.0-1 g++-15-x86-64-linux-gnu_15.3.0-1 g++-x86-64-linux-gnu_4:15.2.0-5+b1 gcc_4:15.2.0-5+b1 gcc-14_14.3.0-15 gcc-14-base_14.3.0-15 gcc-14-x86-64-linux-gnu_14.3.0-15 gcc-15_15.3.0-1 gcc-15-base_15.3.0-1 gcc-15-x86-64-linux-gnu_15.3.0-1 gcc-16-base_16.1.0-2 gcc-x86-64-linux-gnu_4:15.2.0-5+b1 gettext_1.0-1 gettext-base_1.0-1 gnupg_2.4.9-4 gnupg-l10n_2.4.9-4 gpg_2.4.9-4 gpg-agent_2.4.9-4 gpgconf_2.4.9-4 gpgsm_2.4.9-4 grep_3.12-1 gzip_1.13-1 hostname_3.25 init-system-helpers_1.69 libacl1_2.3.2-3 libapt-pkg7.0_3.3.1 libasan8_16.1.0-2 libassuan9_3.0.2-2+b2 libatomic1_16.1.0-2 libattr1_1:2.5.2-4 libaudit-common_1:4.1.2-1 libaudit1_1:4.1.2-1+b1 libbinutils_2.46.50.20260608-1 libblkid1_2.42.1-5 libbsd0_0.12.2-3 libbz2-1.0_1.0.8-6+b2 libc-bin_2.42-16 libc-dev-bin_2.42-16 libc-gconv-modules-extra_2.42-16 libc-l10n_2.42-16 libc6_2.42-16 libc6-dev_2.42-16 libcap-ng0_0.9.3-1 libcap2_1:2.78-1 libcc1-0_16.1.0-2 libclass-inspector-perl_1.36-3 libcrypt-dev_1:4.5.1-1+b1 libcrypt1_1:4.5.1-1+b1 libctf-nobfd0_2.46.50.20260608-1 libctf0_2.46.50.20260608-1 libdb5.3t64_5.3.28+dfsg2-11+b1 libdebconfclient0_0.283 libdpkg-perl_1.23.7 libeatmydata1_131-2+b2 libffi8_3.5.2-4 libfile-sharedir-perl_1.118-3 libgcc-14-dev_14.3.0-15 libgcc-15-dev_15.3.0-1 libgcc-s1_16.1.0-2 libgcrypt20_1.12.2-1 libgdbm-compat4t64_1.26-1+b2 libgdbm6t64_1.26-1+b2 libgmp10_2:6.3.0+dfsg-5+b2 libgnutls30t64_3.8.13-1 libgomp1_16.1.0-2 libgpg-error0_1.61-2 libgprofng0_2.46.50.20260608-1 libhogweed6t64_3.10.2-1+b1 libhwasan0_16.1.0-2 libidn2-0_2.3.8-5 libisl23_0.27-2 libitm1_16.1.0-2 libjansson4_2.14-2+b4 libksba8_1.8.0-3 liblastlog2-2_2.42.1-5 libldap2_2.6.10+dfsg-1+b3 liblsan0_16.1.0-2 liblz4-1_1.10.0-10 liblzma5_5.8.3-1 libmd0_1.2.0-2 libmount1_2.42.1-5 libmpc3_1.3.1-3 libmpfr6_4.2.2-3 libncursesw6_6.6+20251231-1+b1 libnettle8t64_3.10.2-1+b1 libnpth0t64_1.8-3+b2 libosp5_1.5.2-15.2 libp11-kit0_0.26.2-3 libpam-modules_1.7.0-6 libpam-modules-bin_1.7.0-6 libpam-runtime_1.7.0-6 libpam0g_1.7.0-6 libpcre2-8-0_10.46-1+b2 libperl5.40_5.40.1-8 libperl5.42_5.42.2-2 libpod-parser-perl_1.67-1 libquadmath0_16.1.0-2 libreadline8t64_8.3-4 libsasl2-2_2.1.28+dfsg1-11 libsasl2-modules-db_2.1.28+dfsg1-11 libseccomp2_2.6.0-2+b1 libselinux1_3.10-1 libsemanage-common_3.10-1 libsemanage2_3.10-1 libsepol2_3.10-1 libsframe2_2.45.50.20251209-1+b1 libsframe3_2.46.50.20260608-1 libsgmls-perl_1.03ii-38 libsmartcols1_2.42.1-5 libsqlite3-0_3.53.2-1 libssl3t64_3.6.3-1 libstdc++-14-dev_14.3.0-15 libstdc++-15-dev_15.3.0-1 libstdc++6_16.1.0-2 libsyntax-keyword-try-perl_0.31-1+b1 libsystemd0_261~rc4-1 libtasn1-6_4.21.0-2+b1 libtinfo6_6.6+20251231-1+b1 libtsan2_16.1.0-2 libubsan1_16.1.0-2 libudev1_261~rc4-1 libunistring5_1.4.2-1 libuuid1_2.42.1-5 libxml2-16_2.15.3+dfsg-1 libxs-parse-keyword-perl_0.49-1+b1 libxxhash0_0.8.3-2+b2 libyaml-tiny-perl_1.76-1 libzstd1_1.5.7+dfsg-3+b2 linux-libc-dev_7.0.12-2 locales-all_2.42-16 login.defs_1:4.19.3-2 make_4.4.1-3 mawk_1.3.4.20260302-1 ncurses-base_6.6+20251231-1 ncurses-bin_6.6+20251231-1+b1 opensp_1.5.2-15.2 openssl-provider-legacy_3.6.3-1 passwd_1:4.19.3-2 patch_2.8-2 perl_5.42.2-2 perl-base_5.42.2-2 perl-modules-5.40_5.40.1-8 perl-modules-5.42_5.42.2-2 pinentry-curses_1.3.2-4 po4a_0.74-1 readline-common_8.3-4 rpcsvc-proto_1.4.4-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-3 sgml-base_1.31+nmu1 sqv_1.3.0-5+b2 sysvinit-utils_3.18-1 tar_1.35+dfsg-4 util-linux_2.42.1-5 xz-utils_5.8.3-1 zlib1g_1:1.3.dfsg+really1.3.2-3 +------------------------------------------------------------------------------+ | Build Wed, 17 Jun 2026 00:01:45 +0000 | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (native) Source: debhelper Binary: debhelper, libdebhelper-perl Architecture: all Version: 14.1 Maintainer: Debhelper Maintainers Uploaders: Niels Thykier Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/debian/debhelper Vcs-Git: https://salsa.debian.org/debian/debhelper.git Testsuite: autopkgtest-pkg-perl Build-Depends: dpkg-dev (>= 1.18.0~), libtest-pod-perl , man-db , perl:any, po4a Package-List: debhelper deb devel optional arch=all libdebhelper-perl deb perl optional arch=all Checksums-Sha1: 5dbbf1761df747451d399e3dfcd915825ed7dd5b 642064 debhelper_14.1.tar.xz Checksums-Sha256: ec62d7c75d800d28e616cd78bd9e704d71cf1e9c4bbb51c485baa1b7f378b590 642064 debhelper_14.1.tar.xz Files: a35fdf2b5ca1da8235a37124ce49549f 642064 debhelper_14.1.tar.xz Dgit: c00868ab8238434c6cde9b5539d547a89341eef7 debian archive/debian/14.1 https://git.dgit.debian.org/debhelper Git-Tag-Info: tag=daeeabd3ef8556046d5c50cc3d2b37752e35b9b3 fp=f5e7199aef5e5c67e555873f740d68888365d289 Git-Tag-Tagger: Niels Thykier -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEN02M5NuW6cvUwJcqYG0ITkaDwHkFAmoxnLsACgkQYG0ITkaD wHmUDA//c5EMcbdBKZvsheXzG5Sg9+hO5cRw1jBrFxD9ZJ4JS+iV23IC5IFPQY/k y6fQuh1DiYIYWEF1YoL486T6O88LbtKNO/OkmkH1U+BcQbQrdKunLPcKfNYZ/gp8 XiRFdg6z3U+kyoUTPyPv5Ysi3ZzALfjORlB1y8fRgg/YlK2gNkX8tQ8DRQC04qZz M99V+rheqOZFKoN2Awt00arqrzjbdPoK5clAY7nV13A7lSAN5mPgqBvZgw8yC5W6 t33qpPyeMIs9CyeHu4b3tInWgjepg4bU2cv600m0H2pCoVyomx1clx2SzMK9ChW4 L4OHj2SlvcGhiRA2ixNzysqrp119myPdzTJPgPkXNJ5qFDdCqpHzaE/2FqnYR76u f/JgoJm4JCGC4i1QSaCIJl8i5kyv4wL71v/m1dftO8FFdjcCuU6h8mCaIJCjGoPH 3H9Vna5Bzl2VZOtMwVwjGVOId8j44AlPvQyC9vF8C7YezttuRZUbxkE+yQmMVYWQ /fHMzTnqWDVrUUfFwXdB9aqZlIl3YzhGphj9tfNDOhwMqlu4yaBSxxgs17NAlwsA jkZiUN4yQrESphoU0jCXbn9zGzXt/HtC0k4ZZGVp9YXOOSmPot7yNN6UXIk2bkqf NUlWNffTyNlkN7OrxoLGRo5AQlW/LVPOuKLe+YcvoedhgLFosno= =wxI3 -----END PGP SIGNATURE----- dpkg-source: warning: cannot verify inline signature for ./debhelper_14.1.dsc: missing OpenPGP keyrings dpkg-source: info: verifying ./debhelper_14.1.dsc dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-keyring.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-tag2upload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-nonupload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-maintainers.pgp dpkg-source: info: extracting debhelper in /build/debhelper-74j5aY/debhelper-14.1 dpkg-source: info: unpacking debhelper_14.1.tar.xz clean up apt cache ------------------ Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Time Build Commands Wed, 17 Jun 2026 00:01:45 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network debhelper_14.1 perl-5.42-throwaway amd64 --------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network debhelper_14.1 perl-5.42-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/build/debhelper-74j5aY/debhelper-14.1 SCHROOT_ALIAS_NAME=perl-5.42-throwaway-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.42-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.42-amd64-debomatic-5c52dbb2-ec72-4a92-8453-3aff5b31d770 SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc dpkg-buildpackage: info: source package debhelper dpkg-buildpackage: info: source version 14.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Niels Thykier dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean ./run dh clean --without autoreconf --with build-stamp dh_auto_clean make -j2 clean make[1]: Entering directory '/build/debhelper-74j5aY/debhelper-14.1' rm -f *-stamp *.1 *.7 lib/Debian/Debhelper/Dh_Version.pm po4a --previous --rm-translations --rm-backups man/po4a/po4a.cfg po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! (1446 entries) for lang in de es fr ja pt; do \ if [ -e man/$lang ]; then rmdir man/$lang; fi; \ done; make[1]: Leaving directory '/build/debhelper-74j5aY/debhelper-14.1' dh_clean dpkg-source -b . dpkg-source: info: using source format '3.0 (native)' dpkg-source: info: building debhelper in ../debhelper_14.1.tar.xz dpkg-source: info: building debhelper in ../debhelper_14.1.dsc debian/rules binary ./run dh binary --without autoreconf --with build-stamp dh_auto_configure dh_auto_build make -j2 INSTALL="install --strip-program=true" make[1]: Entering directory '/build/debhelper-74j5aY/debhelper-14.1' po4a --previous -L UTF-8 man/po4a/po4a.cfg printf "package Debian::Debhelper::Dh_Version;\n\$version='14.1';\n1" > \ lib/Debian/Debhelper/Dh_Version.pm cat debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{14.1}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' dh_assistant dh_auto_build dh_auto_clean dh_auto_configure dh_auto_install dh_auto_test dh_bugfiles dh_builddeb dh_clean dh_compress dh_computeautosubstvars dh_dwz dh_fixperms dh_gencontrol dh_icons dh_install dh_installalternatives dh_installcatalogs dh_installchangelogs dh_installcron dh_installdeb dh_installdebconf dh_installdirs dh_installdocs dh_installemacsen dh_installexamples dh_installgsettings dh_installifupdown dh_installinfo dh_installinit dh_installinitramfs dh_installlogcheck dh_installlogrotate dh_installman dh_installmanpages dh_installmenu dh_installmime dh_installmodules dh_installpam dh_installppp dh_installsystemd dh_installsystemduser dh_installsysusers dh_installtmpfiles dh_installudev dh_installwm dh_installxfonts dh_link dh_lintian dh_listpackages dh_makeshlibs dh_md5sums dh_missing dh_movefiles dh_movetousr dh_perl dh_prep dh_shlibdeps dh_strip dh_systemd_enable dh_systemd_start dh_testdir dh_testroot dh_ucf dh_update_autotools_config dh_usrlocal | \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 > debhelper.7 pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.7 pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 debhelper-obsolete-compat.pod > debhelper-obsolete-compat.7 pod2man --utf8 -c Debhelper -r "14.1" dh_assistant dh_assistant.1 pod2man --utf8 -c Debhelper -r "14.1" dh_auto_build dh_auto_build.1 pod2man --utf8 -c Debhelper -r "14.1" dh_auto_clean dh_auto_clean.1 pod2man --utf8 -c Debhelper -r "14.1" dh_auto_configure dh_auto_configure.1 pod2man --utf8 -c Debhelper -r "14.1" dh_auto_install dh_auto_install.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_auto_test dh_auto_test.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_bugfiles dh_bugfiles.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_builddeb dh_builddeb.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_clean dh_clean.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_compress dh_compress.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_computeautosubstvars dh_computeautosubstvars.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_dwz dh_dwz.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_fixperms dh_fixperms.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_gencontrol dh_gencontrol.1 Discard man/es/debhelper.pod (93 of 278 strings; only 33.45% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_icons dh_icons.1 Discard man/es/debhelper-compat-upgrade-checklist.pod (145 of 351 strings; only 41.31% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_install dh_install.1 Discard man/es/dh.pod (58 of 146 strings; only 39.72% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installalternatives dh_installalternatives.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_clean.pod (19 of 29 strings; only 65.51% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_dwz.pod (12 of 25 strings; only 48% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installcatalogs dh_installcatalogs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_install.pod (28 of 50 strings; only 56% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installchangelogs.pod (25 of 33 strings; only 75.75% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installdeb.pod (23 of 63 strings; only 36.5% translated; need 80%). pod2man --utf8 -c Debhelper -r "14.1" dh_installchangelogs dh_installchangelogs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installdebconf.pod (28 of 53 strings; only 52.83% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installdirs.pod (19 of 28 strings; only 67.85% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installdocs.pod (44 of 62 strings; only 70.96% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installexamples.pod (24 of 34 strings; only 70.58% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installcron dh_installcron.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installinit.pod (38 of 65 strings; only 58.46% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installinitramfs.pod (10 of 21 strings; only 47.61% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installman.pod (28 of 38 strings; only 73.68% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installdeb dh_installdeb.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_link.pod (28 of 36 strings; only 77.77% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_makeshlibs.pod (32 of 61 strings; only 52.45% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installdebconf dh_installdebconf.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_strip.pod (23 of 43 strings; only 53.48% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installdirs dh_installdirs.1 Discard man/es/dh_testroot.pod (12 of 21 strings; only 57.14% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_systemd_enable.pod (9 of 37 strings; only 24.32% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_systemd_start.pod (11 of 25 strings; only 44% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/strings-kept-translations.pod (0 of 2 strings; only 0% translated; need 80%). pod2man --utf8 -c Debhelper -r "14.1" dh_installdocs dh_installdocs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installemacsen dh_installemacsen.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installexamples dh_installexamples.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installgsettings dh_installgsettings.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installifupdown dh_installifupdown.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installinfo dh_installinfo.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installinit dh_installinit.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installinitramfs dh_installinitramfs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installlogcheck dh_installlogcheck.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installlogrotate dh_installlogrotate.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installman dh_installman.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installmanpages dh_installmanpages.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installmenu dh_installmenu.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installmime dh_installmime.1 Discard man/ja/debhelper.pod (123 of 278 strings; only 44.24% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installmodules dh_installmodules.1 Discard man/ja/debhelper-compat-upgrade-checklist.pod (170 of 351 strings; only 48.43% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh.pod (64 of 146 strings; only 43.83% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installpam dh_installpam.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_dwz.pod (13 of 25 strings; only 52% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installppp dh_installppp.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_install.pod (33 of 50 strings; only 66% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installchangelogs.pod (24 of 33 strings; only 72.72% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installdeb.pod (25 of 63 strings; only 39.68% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installdebconf.pod (27 of 53 strings; only 50.94% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installdirs.pod (19 of 28 strings; only 67.85% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installdocs.pod (39 of 62 strings; only 62.9% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installsystemd dh_installsystemd.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installexamples.pod (22 of 34 strings; only 64.7% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installinit.pod (44 of 65 strings; only 67.69% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installinitramfs.pod (11 of 21 strings; only 52.38% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installsystemduser dh_installsystemduser.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installman.pod (28 of 38 strings; only 73.68% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_link.pod (28 of 36 strings; only 77.77% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installsysusers dh_installsysusers.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_makeshlibs.pod (32 of 61 strings; only 52.45% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installtmpfiles dh_installtmpfiles.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_testroot.pod (12 of 21 strings; only 57.14% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_systemd_enable.pod (17 of 37 strings; only 45.94% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_systemd_start.pod (18 of 25 strings; only 72% translated; need 80%). pod2man --utf8 -c Debhelper -r "14.1" dh_installudev dh_installudev.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_installwm dh_installwm.1 pod2man --utf8 -c Debhelper -r "14.1" dh_installxfonts dh_installxfonts.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_link dh_link.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_lintian dh_lintian.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_listpackages dh_listpackages.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_makeshlibs dh_makeshlibs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_md5sums dh_md5sums.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_missing dh_missing.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_movefiles dh_movefiles.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_movetousr dh_movetousr.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_perl dh_perl.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "14.1" dh_prep dh_prep.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! touch po4a-stamp pod2man --utf8 -c Debhelper -r "14.1" dh_shlibdeps dh_shlibdeps.1 pod2man --utf8 -c Debhelper -r "14.1" dh_strip dh_strip.1 pod2man --utf8 -c Debhelper -r "14.1" dh_systemd_enable dh_systemd_enable.1 pod2man --utf8 -c Debhelper -r "14.1" dh_systemd_start dh_systemd_start.1 pod2man --utf8 -c Debhelper -r "14.1" dh_testdir dh_testdir.1 pod2man --utf8 -c Debhelper -r "14.1" dh_testroot dh_testroot.1 pod2man --utf8 -c Debhelper -r "14.1" dh_ucf dh_ucf.1 pod2man --utf8 -c Debhelper -r "14.1" dh_update_autotools_config dh_update_autotools_config.1 pod2man --utf8 -c Debhelper -r "14.1" dh_usrlocal dh_usrlocal.1 pod2man --utf8 -c Debhelper -r "14.1" dh dh.1 set -e; \ lang=de ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "14.1" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{14.1}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi set -e; \ lang=es ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "14.1" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{14.1}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-es-stamp set -e; \ lang=fr ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "14.1" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{14.1}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-de-stamp set -e; \ lang=ja ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "14.1" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{14.1}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-ja-stamp set -e; \ lang=pt ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "14.1" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{14.1}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "14.1" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-fr-stamp touch translated-pt-stamp make[1]: Leaving directory '/build/debhelper-74j5aY/debhelper-14.1' dh_auto_test make -j2 test make[1]: Entering directory '/build/debhelper-74j5aY/debhelper-14.1' printf "package Debian::Debhelper::Dh_Version;\n\$version='14.1';\n1" > \ lib/Debian/Debhelper/Dh_Version.pm MAKEFLAGS= prove -lrj2 --timer t [00:02:12] t/Dh_Lib/00-use.t .................................... ok 176 ms ( 0.00 usr 0.00 sys + 0.06 cusr 0.02 csys = 0.08 CPU) [00:02:12] t/Dh_Lib/control-parsing.t ........................... ok 188 ms ( 0.01 usr 0.00 sys + 0.13 cusr 0.05 csys = 0.19 CPU) [00:02:12] t/Dh_Lib/path.t ...................................... ok 159 ms ( 0.00 usr 0.00 sys + 0.15 cusr 0.04 csys = 0.19 CPU) [00:02:12] t/buildsystems/01-build-system-basic-api.t ........... ok 167 ms ( 0.00 usr 0.00 sys + 0.15 cusr 0.02 csys = 0.17 CPU) [00:02:13] t/buildsystems/02-make-jobserver-makeflags.t ......... ok 167 ms ( 0.00 usr 0.00 sys + 0.15 cusr 0.01 csys = 0.16 CPU) [00:02:13] t/buildsystems/03-bs-auto-buildable.t ................ ok 281 ms ( 0.02 usr 0.01 sys + 0.26 cusr 0.01 csys = 0.30 CPU) [00:02:13] t/buildsystems/05-load-build-system.t ................ ok 330 ms ( 0.00 usr 0.00 sys + 0.19 cusr 0.04 csys = 0.23 CPU) [00:02:13] t/buildsystems/06-buildsystem-mkdir-rmdir.t .......... ok 187 ms ( 0.00 usr 0.00 sys + 0.08 cusr 0.01 csys = 0.09 CPU) [00:02:14] t/buildsystems/04-dh_auto_do_autoconf.t .............. ok 1108 ms ( 0.02 usr 0.00 sys + 1.03 cusr 0.15 csys = 1.20 CPU) [00:02:14] t/debhelper-compat/syntax.t .......................... ok 141 ms ( 0.01 usr 0.00 sys + 0.11 cusr 0.04 csys = 0.16 CPU) [00:02:14] t/dh-lib.t ........................................... ok 234 ms ( 0.01 usr 0.00 sys + 0.12 cusr 0.06 csys = 0.19 CPU) [00:02:14] t/dh-sequencer.t ..................................... ok 131 ms ( 0.01 usr 0.00 sys + 0.07 cusr 0.01 csys = 0.09 CPU) [00:02:17] t/dh_compress.t ...................................... ok 2688 ms ( 0.01 usr 0.00 sys + 1.75 cusr 0.48 csys = 2.24 CPU) [00:02:19] t/dh_gencontrol/01-dbgsym-m-a-same.t ................. ok 1869 ms ( 0.00 usr 0.00 sys + 1.41 cusr 0.33 csys = 1.74 CPU) [00:02:20] t/dh_install/01-basics.t ............................. ok 992 ms ( 0.00 usr 0.00 sys + 0.68 cusr 0.12 csys = 0.80 CPU) [00:02:21] t/buildsystems/buildsystem_tests.t ................... ok 8000 ms ( 0.06 usr 0.01 sys + 5.82 cusr 1.27 csys = 7.16 CPU) [00:02:22] t/dh_install/03-866570-dont-install-from-host.t ...... ok 747 ms ( 0.01 usr 0.00 sys + 0.35 cusr 0.09 csys = 0.45 CPU) [00:02:22] t/dh_install/02-bugs-53XXXX.t ........................ ok 2411 ms ( 0.02 usr 0.00 sys + 2.88 cusr 0.51 csys = 3.41 CPU) [00:02:24] t/dh_install/04-sourcedir.t .......................... ok 2141 ms ( 0.02 usr 0.00 sys + 2.58 cusr 0.48 csys = 3.08 CPU) [00:02:25] t/dh_installdocs/01-868204-ignore-broken-symlinks.t .. ok 662 ms ( 0.00 usr 0.00 sys + 0.34 cusr 0.09 csys = 0.43 CPU) [00:02:28] t/dh_installdocs/dh_installdocs.t .................... ok 3617 ms ( 0.02 usr 0.01 sys + 1.88 cusr 0.43 csys = 2.34 CPU) [00:02:30] t/dh_installgsettings/dh_installgsettings.t .......... ok 1263 ms ( 0.01 usr 0.00 sys + 0.68 cusr 0.11 csys = 0.80 CPU) [00:02:32] t/dh_installchangelogs/dh_installchangelogs.t ........ ok 9562 ms ( 0.08 usr 0.01 sys + 9.14 cusr 2.05 csys = 11.28 CPU) [00:02:32] t/dh_installman/01-basics.t .......................... skipped: Test requires man or man-recode [00:02:33] t/dh_installinit/dh_installinit.t .................... ok 3255 ms ( 0.02 usr 0.01 sys + 6.75 cusr 1.50 csys = 8.28 CPU) [00:02:33] t/dh_installpam/dh_installpam.t ...................... ok 1411 ms ( 0.01 usr 0.00 sys + 2.26 cusr 0.35 csys = 2.62 CPU) [00:02:35] t/dh_installsystemd/dh_installsystemd_tmpfiles.t ..... ok 1656 ms ( 0.01 usr 0.00 sys + 0.82 cusr 0.16 csys = 0.99 CPU) [00:02:37] t/dh_installsystemd/dh_systemd.t ..................... ok 2307 ms ( 0.02 usr 0.00 sys + 1.02 cusr 0.26 csys = 1.30 CPU) [00:02:41] t/dh_installsystemduser/dh_installsystemduser.t ...... ok 3571 ms ( 0.03 usr 0.00 sys + 1.79 cusr 0.52 csys = 2.34 CPU) [00:02:45] t/dh_link/01-basic.t ................................. ok 3582 ms ( 0.03 usr 0.00 sys + 1.89 cusr 0.36 csys = 2.28 CPU) [00:02:47] t/dh_link/02-346405.t ................................ ok 2101 ms ( 0.02 usr 0.00 sys + 1.27 cusr 0.22 csys = 1.51 CPU) [00:02:47] t/dh_link/03-894229.t ................................ ok 100 ms ( 0.01 usr 0.00 sys + 0.07 cusr 0.04 csys = 0.12 CPU) [00:02:48] t/dh_missing/01-no-missing.t ......................... ok 1336 ms ( 0.01 usr 0.01 sys + 1.05 cusr 0.26 csys = 1.33 CPU) [00:02:49] t/dh_missing/02-fail-on-missing.t .................... ok 1354 ms ( 0.02 usr 0.00 sys + 1.08 cusr 0.26 csys = 1.36 CPU) [00:02:50] t/dh_missing/03-dh_install-redirection.t ............. ok 624 ms ( 0.01 usr 0.00 sys + 0.51 cusr 0.10 csys = 0.62 CPU) [00:02:51] t/dh_missing/04-not-installed-glob.t ................. ok 909 ms ( 0.01 usr 0.00 sys + 0.71 cusr 0.18 csys = 0.90 CPU) [00:02:53] t/dh_movetousr/dh_movetousr.t ........................ ok 1774 ms ( 0.04 usr 0.00 sys + 1.38 cusr 0.36 csys = 1.78 CPU) [00:02:55] t/dh_usrlocal/01-basic.t ............................. ok 2242 ms ( 0.03 usr 0.00 sys + 1.76 cusr 0.43 csys = 2.22 CPU) [00:02:55] t/dh_installsystemd/dh_installsystemd.t .............. ok 22114 ms ( 0.25 usr 0.02 sys + 27.23 cusr 6.71 csys = 34.21 CPU) [00:02:55] t/override_target.t .................................. ok 124 ms ( 0.00 usr 0.01 sys + 0.11 cusr 0.01 csys = 0.13 CPU) [00:02:55] t/pod.t .............................................. skipped: Test::Pod required [00:02:55] t/size.t ............................................. ok 67 ms ( 0.01 usr 0.00 sys + 0.06 cusr 0.01 csys = 0.08 CPU) [00:02:56] t/syntax/syntax-libs.t ............................... ok 897 ms ( 0.01 usr 0.00 sys + 0.75 cusr 0.14 csys = 0.90 CPU) [00:02:57] t/maintscript.t ...................................... ok 1797 ms ( 0.03 usr 0.01 sys + 15.56 cusr 4.00 csys = 19.60 CPU) [00:02:58] t/syntax/syntax-progs.t .............................. ok 2219 ms ( 0.02 usr 0.00 sys + 3.18 cusr 0.78 csys = 3.98 CPU) [00:02:58] All tests successful. Files=45, Tests=687, 46 wallclock secs ( 0.49 usr 0.08 sys + 50.57 cusr 11.77 csys = 62.91 CPU) Result: PASS make[1]: Leaving directory '/build/debhelper-74j5aY/debhelper-14.1' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j2 install DESTDIR=/build/debhelper-74j5aY/debhelper-14.1/debian/tmp AM_UPDATE_INFO_DIR=no INSTALL="install --strip-program=true" make[1]: Entering directory '/build/debhelper-74j5aY/debhelper-14.1' install -d /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/bin \ /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/share/debhelper/autoscripts \ /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/share/perl5/Debian/Debhelper/Sequence \ /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/share/perl5/Debian/Debhelper/Buildsystem \ /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/share/perl5/Debian/Debhelper/DH install dh dh_assistant dh_auto_build dh_auto_clean dh_auto_configure dh_auto_install dh_auto_test dh_bugfiles dh_builddeb dh_clean dh_compress dh_computeautosubstvars dh_dwz dh_fixperms dh_gencontrol dh_icons dh_install dh_installalternatives dh_installcatalogs dh_installchangelogs dh_installcron dh_installdeb dh_installdebconf dh_installdirs dh_installdocs dh_installemacsen dh_installexamples dh_installgsettings dh_installifupdown dh_installinfo dh_installinit dh_installinitramfs dh_installlogcheck dh_installlogrotate dh_installman dh_installmanpages dh_installmenu dh_installmime dh_installmodules dh_installpam dh_installppp dh_installsystemd dh_installsystemduser dh_installsysusers dh_installtmpfiles dh_installudev dh_installwm dh_installxfonts dh_link dh_lintian dh_listpackages dh_makeshlibs dh_md5sums dh_missing dh_movefiles dh_movetousr dh_perl dh_prep dh_shlibdeps dh_strip dh_systemd_enable dh_systemd_start dh_testdir dh_testroot dh_ucf dh_update_autotools_config dh_usrlocal /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/bin install -m 0644 autoscripts/* /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/share/debhelper/autoscripts install -m 0644 lib/Debian/Debhelper/*.pm /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/share/perl5/Debian/Debhelper [ "/usr" = /usr ] || \ sed -i '/$prefix=/s@/usr@/usr@g' /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/share/perl5/Debian/Debhelper/Dh_Lib.pm if [ "14.1" ]; then \ MV=$(echo "14.1" | perl -ne 'print $1 if /^(\d+)[~.]/;') ; \ sed -i "/constant HIGHEST_STABLE_COMPAT_LEVEL =>/s@=>.*;@=> ${MV};@g" /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/share/perl5/Debian/Debhelper/Dh_Lib.pm ; \ fi install -m 0644 lib/Debian/Debhelper/Sequence/*.pm /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/share/perl5/Debian/Debhelper/Sequence install -m 0644 lib/Debian/Debhelper/Buildsystem/*.pm /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/share/perl5/Debian/Debhelper/Buildsystem install -m 0644 lib/Debian/Debhelper/DH/*.pm /build/debhelper-74j5aY/debhelper-14.1/debian/tmp/usr/share/perl5/Debian/Debhelper/DH make[1]: Leaving directory '/build/debhelper-74j5aY/debhelper-14.1' chmod -R u\+rwX /build/debhelper-74j5aY/debhelper-14.1/debian/tmp debian/rules execute_before_dh_install make[1]: Entering directory '/build/debhelper-74j5aY/debhelper-14.1' PERLLIBDIR=$(perl -MConfig -e 'print $Config{vendorlib}')/ ; \ perl -I"debian/tmp/${PERLLIBDIR}" debian/gen-provides > debian/debhelper.substvars make[1]: Leaving directory '/build/debhelper-74j5aY/debhelper-14.1' dh_install dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_installman: warning: man is not available. Skipping re-encode of UTF-8 manpages dh_perl dh_link dh_missing dh_fixperms dh_compress dh_installdeb dh_computeautosubstvars dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdebhelper-perl' in '../libdebhelper-perl_14.1_all.deb'. dpkg-deb: building package 'debhelper' in '../debhelper_14.1_all.deb'. dpkg-genbuildinfo -O../debhelper_14.1_amd64.buildinfo dpkg-genchanges -O../debhelper_14.1_amd64.changes dpkg-genchanges: info: including full source code in upload dpkg-source --after-build . dpkg-buildpackage: info: full upload; Debian-native package (full source is included) -------------------------------------------------------------------------------- Build finished at 2026-06-17T00:03:00Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes Wed, 17 Jun 2026 00:03:01 +0000 | +------------------------------------------------------------------------------+ debhelper_14.1_amd64.changes: ----------------------------- Format: 1.8 Date: Tue, 16 Jun 2026 18:44:38 +0000 Source: debhelper Binary: debhelper libdebhelper-perl Architecture: source all Version: 14.1 Distribution: perl-5.42-throwaway Urgency: medium Maintainer: Debhelper Maintainers Changed-By: Niels Thykier Description: debhelper - helper programs for debian/rules libdebhelper-perl - debhelper perl modules Closes: 1140119 Changes: debhelper (14.1) unstable; urgency=medium . * dh_installpam: Revert compat 14 change at request of the `pam` maintainers. (Closes: #1140119) Checksums-Sha1: ca392f77f77b0c8fe692f948551a07965ba8b3f8 896 debhelper_14.1.dsc 5cc6a71011f6ce8a874efa45e628512995dcdf79 642256 debhelper_14.1.tar.xz 620c9a26b43d00cab1dc8a75a1f71e15f1792dc9 941828 debhelper_14.1_all.deb 26e3414c389df610085c5d29e878f1f9da4462cd 4767 debhelper_14.1_amd64.buildinfo 6cf16808ce10bf1620acc85a1dfd952dfca6a9ae 77064 libdebhelper-perl_14.1_all.deb Checksums-Sha256: 679e65b31b6b22f22e767ee84bbbab2cf783db5d9eafbb234bb4018e397c2ecb 896 debhelper_14.1.dsc b9b6b697385b1de49ddc3c463ebd5c4a7433053b204db9d70a13793e5c4771e7 642256 debhelper_14.1.tar.xz d7c83617c3d2fe7f3287e6994a10818b65840a9182438b0e35277ae38291d5d0 941828 debhelper_14.1_all.deb 467728ae4b7ffc88b1fb6589ce19bb4413bd7127ace053c03a52f31de415a024 4767 debhelper_14.1_amd64.buildinfo 0d6df725dc0bb843c07ee8a19f6cfaac0367e4df0ef553e7fcb931dba5a5a77e 77064 libdebhelper-perl_14.1_all.deb Files: 76537a0b3ecd00912e778f45e5ca8933 896 devel optional debhelper_14.1.dsc ca070b5adba2f77105720ef4b0550ea7 642256 devel optional debhelper_14.1.tar.xz b85903c215acfd242d565f7def8c1533 941828 devel optional debhelper_14.1_all.deb a646fef5bf163bb808e1352e96b5e220 4767 devel optional debhelper_14.1_amd64.buildinfo a0c11a5e3cb6601a64304e30e23dfd3b 77064 perl optional libdebhelper-perl_14.1_all.deb +------------------------------------------------------------------------------+ | Buildinfo Wed, 17 Jun 2026 00:03:01 +0000 | +------------------------------------------------------------------------------+ Format: 1.0 Source: debhelper Binary: debhelper libdebhelper-perl Architecture: all source Version: 14.1 Checksums-Md5: 76537a0b3ecd00912e778f45e5ca8933 896 debhelper_14.1.dsc b85903c215acfd242d565f7def8c1533 941828 debhelper_14.1_all.deb a0c11a5e3cb6601a64304e30e23dfd3b 77064 libdebhelper-perl_14.1_all.deb Checksums-Sha1: ca392f77f77b0c8fe692f948551a07965ba8b3f8 896 debhelper_14.1.dsc 620c9a26b43d00cab1dc8a75a1f71e15f1792dc9 941828 debhelper_14.1_all.deb 6cf16808ce10bf1620acc85a1dfd952dfca6a9ae 77064 libdebhelper-perl_14.1_all.deb Checksums-Sha256: 679e65b31b6b22f22e767ee84bbbab2cf783db5d9eafbb234bb4018e397c2ecb 896 debhelper_14.1.dsc d7c83617c3d2fe7f3287e6994a10818b65840a9182438b0e35277ae38291d5d0 941828 debhelper_14.1_all.deb 0d6df725dc0bb843c07ee8a19f6cfaac0367e4df0ef553e7fcb931dba5a5a77e 77064 libdebhelper-perl_14.1_all.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Wed, 17 Jun 2026 00:03:00 +0000 Build-Path: /build/debhelper-74j5aY/debhelper-14.1 Build-Tainted-By: usr-local-has-programs Installed-Build-Depends: base-files (= 14.2), base-passwd (= 3.6.8), bash (= 5.3-3), binutils (= 2.46.50.20260608-1), binutils-common (= 2.46.50.20260608-1), binutils-x86-64-linux-gnu (= 2.46.50.20260608-1), build-essential (= 12.12), bzip2 (= 1.0.8-6+b2), coreutils (= 9.10-1), cpp (= 4:15.2.0-5+b1), cpp-15 (= 15.3.0-1), cpp-15-x86-64-linux-gnu (= 15.3.0-1), cpp-x86-64-linux-gnu (= 4:15.2.0-5+b1), dash (= 0.5.12-12), debconf (= 1.5.92), debianutils (= 5.23.2), diffutils (= 1:3.12-1), dpkg (= 1.23.7), dpkg-dev (= 1.23.7), findutils (= 4.10.0-4), g++ (= 4:15.2.0-5+b1), g++-15 (= 15.3.0-1), g++-15-x86-64-linux-gnu (= 15.3.0-1), g++-x86-64-linux-gnu (= 4:15.2.0-5+b1), gcc (= 4:15.2.0-5+b1), gcc-15 (= 15.3.0-1), gcc-15-base (= 15.3.0-1), gcc-15-x86-64-linux-gnu (= 15.3.0-1), gcc-16-base (= 16.1.0-2), gcc-x86-64-linux-gnu (= 4:15.2.0-5+b1), gettext (= 1.0-1), gettext-base (= 1.0-1), grep (= 3.12-1), gzip (= 1.13-1), hostname (= 3.25), init-system-helpers (= 1.69), libacl1 (= 2.3.2-3), libasan8 (= 16.1.0-2), libatomic1 (= 16.1.0-2), libattr1 (= 1:2.5.2-4), libaudit-common (= 1:4.1.2-1), libaudit1 (= 1:4.1.2-1+b1), libbinutils (= 2.46.50.20260608-1), libblkid1 (= 2.42.1-5), libbz2-1.0 (= 1.0.8-6+b2), libc-bin (= 2.42-16), libc-dev-bin (= 2.42-16), libc-gconv-modules-extra (= 2.42-16), libc6 (= 2.42-16), libc6-dev (= 2.42-16), libcap-ng0 (= 0.9.3-1), libcc1-0 (= 16.1.0-2), libclass-inspector-perl (= 1.36-3), libcrypt1 (= 1:4.5.1-1+b1), libctf-nobfd0 (= 2.46.50.20260608-1), libctf0 (= 2.46.50.20260608-1), libdb5.3t64 (= 5.3.28+dfsg2-11+b1), libdebconfclient0 (= 0.283), libdpkg-perl (= 1.23.7), libfile-sharedir-perl (= 1.118-3), libgcc-15-dev (= 15.3.0-1), libgcc-s1 (= 16.1.0-2), libgdbm-compat4t64 (= 1.26-1+b2), libgdbm6t64 (= 1.26-1+b2), libgmp10 (= 2:6.3.0+dfsg-5+b2), libgomp1 (= 16.1.0-2), libgprofng0 (= 2.46.50.20260608-1), libhwasan0 (= 16.1.0-2), libisl23 (= 0.27-2), libitm1 (= 16.1.0-2), libjansson4 (= 2.14-2+b4), liblsan0 (= 16.1.0-2), liblzma5 (= 5.8.3-1), libmd0 (= 1.2.0-2), libmount1 (= 2.42.1-5), libmpc3 (= 1.3.1-3), libmpfr6 (= 4.2.2-3), libosp5 (= 1.5.2-15.2), libpam-modules (= 1.7.0-6), libpam-modules-bin (= 1.7.0-6), libpam-runtime (= 1.7.0-6), libpam0g (= 1.7.0-6), libpcre2-8-0 (= 10.46-1+b2), libperl5.42 (= 5.42.2-2), libpod-parser-perl (= 1.67-1), libquadmath0 (= 16.1.0-2), libselinux1 (= 3.10-1), libsframe3 (= 2.46.50.20260608-1), libsgmls-perl (= 1.03ii-38), libsmartcols1 (= 2.42.1-5), libssl3t64 (= 3.6.3-1), libstdc++-15-dev (= 15.3.0-1), libstdc++6 (= 16.1.0-2), libsyntax-keyword-try-perl (= 0.31-1+b1), libsystemd0 (= 261~rc4-1), libtinfo6 (= 6.6+20251231-1+b1), libtsan2 (= 16.1.0-2), libubsan1 (= 16.1.0-2), libudev1 (= 261~rc4-1), libunistring5 (= 1.4.2-1), libuuid1 (= 2.42.1-5), libxml2-16 (= 2.15.3+dfsg-1), libxs-parse-keyword-perl (= 0.49-1+b1), libyaml-tiny-perl (= 1.76-1), libzstd1 (= 1.5.7+dfsg-3+b2), linux-libc-dev (= 7.0.12-2), make (= 4.4.1-3), mawk (= 1.3.4.20260302-1), ncurses-base (= 6.6+20251231-1), ncurses-bin (= 6.6+20251231-1+b1), opensp (= 1.5.2-15.2), openssl-provider-legacy (= 3.6.3-1), patch (= 2.8-2), perl (= 5.42.2-2), perl-base (= 5.42.2-2), perl-modules-5.42 (= 5.42.2-2), po4a (= 0.74-1), rpcsvc-proto (= 1.4.4-1), sed (= 4.9-3), sgml-base (= 1.31+nmu1), sysvinit-utils (= 3.18-1), tar (= 1.35+dfsg-4), util-linux (= 2.42.1-5), xz-utils (= 5.8.3-1), zlib1g (= 1:1.3.dfsg+really1.3.2-3) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LANGUAGE="en_GB:en" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" LD_PRELOAD="libeatmydata.so" SOURCE_DATE_EPOCH="1781635478" +------------------------------------------------------------------------------+ | Package contents Wed, 17 Jun 2026 00:03:01 +0000 | +------------------------------------------------------------------------------+ debhelper_14.1_all.deb ---------------------- new Debian package, version 2.0. size 941828 bytes: control archive=9752 bytes. 2396 bytes, 22 lines control 28297 bytes, 394 lines md5sums Package: debhelper Version: 14.1 Architecture: all Maintainer: Debhelper Maintainers Installed-Size: 1522 Depends: dh-autoreconf (>= 17~), dh-strip-nondeterminism (>= 0.028~), dpkg-dev (>= 1.18.2~), autotools-dev, dpkg (>= 1.18.0~), dwz (>= 0.12.20190711), file (>= 3.23), libdebhelper-perl (= 14.1), libdpkg-perl (>= 1.17.14), man-db, po-debconf, perl:any Suggests: dh-make Conflicts: dh-buildinfo Breaks: cmake (<< 3.9~), dh-debputy (<< 0.1.36~), meson (<< 0.40.0~) Replaces: dh-buildinfo Provides: debhelper-compat (= 9), debhelper-compat (= 10), debhelper-compat (= 11), debhelper-compat (= 12), debhelper-compat (= 13), debhelper-compat (= 14), dh-sequence-dwz, dh-sequence-elf-tools, dh-sequence-installinitramfs, dh-sequence-installsysusers, dh-sequence-movetousr, dh-sequence-single-binary, dh-sequence-systemd Section: devel Priority: optional Multi-Arch: foreign Description: helper programs for debian/rules A collection of programs that can be used in a debian/rules file to automate common tasks related to building Debian packages. Programs are included to install various files into your package, compress files, fix file permissions, integrate your package with the Debian menu system, debconf, doc-base, etc. Most Debian packages use debhelper as part of their build process. Commands: dh, dh_assistant, dh_auto_build, dh_auto_clean, dh_auto_configure, dh_auto_install, dh_auto_test, dh_bugfiles, dh_builddeb, dh_clean, dh_compress, dh_computeautosubstvars, dh_dwz, dh_fixperms, dh_gencontrol, dh_icons, dh_install, dh_installalternatives, dh_installcatalogs, dh_installchangelogs, dh_installcron, dh_installdeb, dh_installdebconf, dh_installdirs, dh_installdocs, dh_installemacsen, dh_installexamples, dh_installgsettings, dh_installifupdown, dh_installinfo, dh_installinit, dh_installinitramfs, dh_installlogcheck, dh_installlogrotate, dh_installman, dh_installmanpages, dh_installmenu, dh_installmime, dh_installmodules, dh_installpam, dh_installppp, dh_installsystemd, dh_installsystemduser, dh_installsysusers, dh_installtmpfiles, dh_installudev, dh_installwm, dh_installxfonts, dh_link, dh_lintian, dh_listpackages, dh_makeshlibs, dh_md5sums, dh_missing, dh_movefiles, dh_movetousr, dh_perl, dh_prep, dh_shlibdeps, dh_strip, dh_systemd_enable, dh_systemd_start, dh_testdir, dh_testroot, dh_ucf, dh_update_autotools_config, dh_usrlocal drwxr-xr-x root/root 0 2026-06-16 18:44 ./ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/bin/ -rwxr-xr-x root/root 30773 2026-06-16 18:44 ./usr/bin/dh -rwxr-xr-x root/root 124645 2026-06-16 18:44 ./usr/bin/dh_assistant -rwxr-xr-x root/root 1443 2026-06-16 18:44 ./usr/bin/dh_auto_build -rwxr-xr-x root/root 1585 2026-06-16 18:44 ./usr/bin/dh_auto_clean -rwxr-xr-x root/root 1703 2026-06-16 18:44 ./usr/bin/dh_auto_configure -rwxr-xr-x root/root 3333 2026-06-16 18:44 ./usr/bin/dh_auto_install -rwxr-xr-x root/root 1730 2026-06-16 18:44 ./usr/bin/dh_auto_test -rwxr-xr-x root/root 3787 2026-06-16 18:44 ./usr/bin/dh_bugfiles -rwxr-xr-x root/root 4944 2026-06-16 18:44 ./usr/bin/dh_builddeb -rwxr-xr-x root/root 5692 2026-06-16 18:44 ./usr/bin/dh_clean -rwxr-xr-x root/root 8092 2026-06-16 18:44 ./usr/bin/dh_compress -rwxr-xr-x root/root 1625 2026-06-16 18:44 ./usr/bin/dh_computeautosubstvars -rwxr-xr-x root/root 5421 2026-06-16 18:44 ./usr/bin/dh_dwz -rwxr-xr-x root/root 5491 2026-06-16 18:44 ./usr/bin/dh_fixperms -rwxr-xr-x root/root 7366 2026-06-16 18:44 ./usr/bin/dh_gencontrol -rwxr-xr-x root/root 2129 2026-06-16 18:44 ./usr/bin/dh_icons -rwxr-xr-x root/root 12946 2026-06-16 18:44 ./usr/bin/dh_install -rwxr-xr-x root/root 7051 2026-06-16 18:44 ./usr/bin/dh_installalternatives -rwxr-xr-x root/root 3523 2026-06-16 18:44 ./usr/bin/dh_installcatalogs -rwxr-xr-x root/root 13045 2026-06-16 18:44 ./usr/bin/dh_installchangelogs -rwxr-xr-x root/root 1807 2026-06-16 18:44 ./usr/bin/dh_installcron -rwxr-xr-x root/root 13712 2026-06-16 18:44 ./usr/bin/dh_installdeb -rwxr-xr-x root/root 7071 2026-06-16 18:44 ./usr/bin/dh_installdebconf -rwxr-xr-x root/root 3274 2026-06-16 18:44 ./usr/bin/dh_installdirs -rwxr-xr-x root/root 15804 2026-06-16 18:44 ./usr/bin/dh_installdocs -rwxr-xr-x root/root 4276 2026-06-16 18:44 ./usr/bin/dh_installemacsen -rwxr-xr-x root/root 6071 2026-06-16 18:44 ./usr/bin/dh_installexamples -rwxr-xr-x root/root 2404 2026-06-16 18:44 ./usr/bin/dh_installgsettings -rwxr-xr-x root/root 1618 2026-06-16 18:44 ./usr/bin/dh_installifupdown -rwxr-xr-x root/root 3572 2026-06-16 18:44 ./usr/bin/dh_installinfo -rwxr-xr-x root/root 13988 2026-06-16 18:44 ./usr/bin/dh_installinit -rwxr-xr-x root/root 2672 2026-06-16 18:44 ./usr/bin/dh_installinitramfs -rwxr-xr-x root/root 2101 2026-06-16 18:44 ./usr/bin/dh_installlogcheck -rwxr-xr-x root/root 1277 2026-06-16 18:44 ./usr/bin/dh_installlogrotate -rwxr-xr-x root/root 13825 2026-06-16 18:44 ./usr/bin/dh_installman -rwxr-xr-x root/root 5049 2026-06-16 18:44 ./usr/bin/dh_installmanpages -rwxr-xr-x root/root 2426 2026-06-16 18:44 ./usr/bin/dh_installmenu -rwxr-xr-x root/root 1555 2026-06-16 18:44 ./usr/bin/dh_installmime -rwxr-xr-x root/root 2990 2026-06-16 18:44 ./usr/bin/dh_installmodules -rwxr-xr-x root/root 1224 2026-06-16 18:44 ./usr/bin/dh_installpam -rwxr-xr-x root/root 1430 2026-06-16 18:44 ./usr/bin/dh_installppp -rwxr-xr-x root/root 14777 2026-06-16 18:44 ./usr/bin/dh_installsystemd -rwxr-xr-x root/root 8597 2026-06-16 18:44 ./usr/bin/dh_installsystemduser -rwxr-xr-x root/root 3089 2026-06-16 18:44 ./usr/bin/dh_installsysusers -rwxr-xr-x root/root 4634 2026-06-16 18:44 ./usr/bin/dh_installtmpfiles -rwxr-xr-x root/root 2186 2026-06-16 18:44 ./usr/bin/dh_installudev -rwxr-xr-x root/root 3491 2026-06-16 18:44 ./usr/bin/dh_installwm -rwxr-xr-x root/root 2900 2026-06-16 18:44 ./usr/bin/dh_installxfonts -rwxr-xr-x root/root 4586 2026-06-16 18:44 ./usr/bin/dh_link -rwxr-xr-x root/root 1948 2026-06-16 18:44 ./usr/bin/dh_lintian -rwxr-xr-x root/root 862 2026-06-16 18:44 ./usr/bin/dh_listpackages -rwxr-xr-x root/root 17187 2026-06-16 18:44 ./usr/bin/dh_makeshlibs -rwxr-xr-x root/root 3222 2026-06-16 18:44 ./usr/bin/dh_md5sums -rwxr-xr-x root/root 9279 2026-06-16 18:44 ./usr/bin/dh_missing -rwxr-xr-x root/root 4958 2026-06-16 18:44 ./usr/bin/dh_movefiles -rwxr-xr-x root/root 7853 2026-06-16 18:44 ./usr/bin/dh_movetousr -rwxr-xr-x root/root 5191 2026-06-16 18:44 ./usr/bin/dh_perl -rwxr-xr-x root/root 1947 2026-06-16 18:44 ./usr/bin/dh_prep -rwxr-xr-x root/root 6507 2026-06-16 18:44 ./usr/bin/dh_shlibdeps -rwxr-xr-x root/root 15246 2026-06-16 18:44 ./usr/bin/dh_strip -rwxr-xr-x root/root 9522 2026-06-16 18:44 ./usr/bin/dh_systemd_enable -rwxr-xr-x root/root 9061 2026-06-16 18:44 ./usr/bin/dh_systemd_start -rwxr-xr-x root/root 1373 2026-06-16 18:44 ./usr/bin/dh_testdir -rwxr-xr-x root/root 3011 2026-06-16 18:44 ./usr/bin/dh_testroot -rwxr-xr-x root/root 2544 2026-06-16 18:44 ./usr/bin/dh_ucf -rwxr-xr-x root/root 1925 2026-06-16 18:44 ./usr/bin/dh_update_autotools_config -rwxr-xr-x root/root 4337 2026-06-16 18:44 ./usr/bin/dh_usrlocal drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/doc/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/doc/debhelper/ -rw-r--r-- root/root 11634 2026-06-16 18:44 ./usr/share/doc/debhelper/PROGRAMMING.md.gz -rw-r--r-- root/root 56 2026-06-16 18:44 ./usr/share/doc/debhelper/README -rw-r--r-- root/root 868 2026-06-16 18:44 ./usr/share/doc/debhelper/SUPPORT-POLICY -rw-r--r-- root/root 730 2026-06-16 18:44 ./usr/share/doc/debhelper/TODO -rw-r--r-- root/root 8661 2026-06-16 18:44 ./usr/share/doc/debhelper/changelog.gz -rw-r--r-- root/root 4199 2026-06-16 18:44 ./usr/share/doc/debhelper/copyright drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/doc/debhelper/examples/ -rwxr-xr-x root/root 29 2026-06-16 18:44 ./usr/share/doc/debhelper/examples/rules.tiny drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/de/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/de/man1/ -rw-r--r-- root/root 9941 2026-06-16 18:44 ./usr/share/man/de/man1/dh.1.gz -rw-r--r-- root/root 1803 2026-06-16 18:44 ./usr/share/man/de/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1886 2026-06-16 18:44 ./usr/share/man/de/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1918 2026-06-16 18:44 ./usr/share/man/de/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2454 2026-06-16 18:44 ./usr/share/man/de/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1947 2026-06-16 18:44 ./usr/share/man/de/man1/dh_auto_test.1.gz -rw-r--r-- root/root 2014 2026-06-16 18:44 ./usr/share/man/de/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1889 2026-06-16 18:44 ./usr/share/man/de/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2244 2026-06-16 18:44 ./usr/share/man/de/man1/dh_clean.1.gz -rw-r--r-- root/root 2266 2026-06-16 18:44 ./usr/share/man/de/man1/dh_compress.1.gz -rw-r--r-- root/root 2496 2026-06-16 18:44 ./usr/share/man/de/man1/dh_dwz.1.gz -rw-r--r-- root/root 1991 2026-06-16 18:44 ./usr/share/man/de/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1852 2026-06-16 18:44 ./usr/share/man/de/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1781 2026-06-16 18:44 ./usr/share/man/de/man1/dh_icons.1.gz -rw-r--r-- root/root 3797 2026-06-16 18:44 ./usr/share/man/de/man1/dh_install.1.gz -rw-r--r-- root/root 2175 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 2744 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installchangelogs.1.gz -rw-r--r-- root/root 1609 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installcron.1.gz -rw-r--r-- root/root 4379 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installdeb.1.gz -rw-r--r-- root/root 3682 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installdebconf.1.gz -rw-r--r-- root/root 2086 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installdirs.1.gz -rw-r--r-- root/root 4427 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installdocs.1.gz -rw-r--r-- root/root 2116 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 2764 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installexamples.1.gz -rw-r--r-- root/root 1657 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1967 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installinfo.1.gz -rw-r--r-- root/root 4497 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installinit.1.gz -rw-r--r-- root/root 2106 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installinitramfs.1.gz -rw-r--r-- root/root 1695 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1529 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 3437 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installman.1.gz -rw-r--r-- root/root 2169 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1694 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1462 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installmime.1.gz -rw-r--r-- root/root 1954 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1568 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installpam.1.gz -rw-r--r-- root/root 1599 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installppp.1.gz -rw-r--r-- root/root 1740 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installudev.1.gz -rw-r--r-- root/root 2124 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installwm.1.gz -rw-r--r-- root/root 1897 2026-06-16 18:44 ./usr/share/man/de/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 2644 2026-06-16 18:44 ./usr/share/man/de/man1/dh_link.1.gz -rw-r--r-- root/root 1588 2026-06-16 18:44 ./usr/share/man/de/man1/dh_lintian.1.gz -rw-r--r-- root/root 1513 2026-06-16 18:44 ./usr/share/man/de/man1/dh_listpackages.1.gz -rw-r--r-- root/root 4575 2026-06-16 18:44 ./usr/share/man/de/man1/dh_makeshlibs.1.gz -rw-r--r-- root/root 1698 2026-06-16 18:44 ./usr/share/man/de/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2353 2026-06-16 18:44 ./usr/share/man/de/man1/dh_movefiles.1.gz -rw-r--r-- root/root 2207 2026-06-16 18:44 ./usr/share/man/de/man1/dh_perl.1.gz -rw-r--r-- root/root 1731 2026-06-16 18:44 ./usr/share/man/de/man1/dh_prep.1.gz -rw-r--r-- root/root 2686 2026-06-16 18:44 ./usr/share/man/de/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 3218 2026-06-16 18:44 ./usr/share/man/de/man1/dh_strip.1.gz -rw-r--r-- root/root 2660 2026-06-16 18:44 ./usr/share/man/de/man1/dh_systemd_enable.1.gz -rw-r--r-- root/root 2373 2026-06-16 18:44 ./usr/share/man/de/man1/dh_systemd_start.1.gz -rw-r--r-- root/root 1508 2026-06-16 18:44 ./usr/share/man/de/man1/dh_testdir.1.gz -rw-r--r-- root/root 2144 2026-06-16 18:44 ./usr/share/man/de/man1/dh_testroot.1.gz -rw-r--r-- root/root 2246 2026-06-16 18:44 ./usr/share/man/de/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/de/man7/ -rw-r--r-- root/root 15428 2026-06-16 18:44 ./usr/share/man/de/man7/debhelper-compat-upgrade-checklist.7.gz -rw-r--r-- root/root 3038 2026-06-16 18:44 ./usr/share/man/de/man7/debhelper-obsolete-compat.7.gz -rw-r--r-- root/root 17744 2026-06-16 18:44 ./usr/share/man/de/man7/debhelper.7.gz drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/es/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/es/man1/ -rw-r--r-- root/root 1541 2026-06-16 18:44 ./usr/share/man/es/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1604 2026-06-16 18:44 ./usr/share/man/es/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1656 2026-06-16 18:44 ./usr/share/man/es/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2148 2026-06-16 18:44 ./usr/share/man/es/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1645 2026-06-16 18:44 ./usr/share/man/es/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1719 2026-06-16 18:44 ./usr/share/man/es/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1675 2026-06-16 18:44 ./usr/share/man/es/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2015 2026-06-16 18:44 ./usr/share/man/es/man1/dh_compress.1.gz -rw-r--r-- root/root 1715 2026-06-16 18:44 ./usr/share/man/es/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1581 2026-06-16 18:44 ./usr/share/man/es/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1487 2026-06-16 18:44 ./usr/share/man/es/man1/dh_icons.1.gz -rw-r--r-- root/root 1932 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 1418 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installcron.1.gz -rw-r--r-- root/root 1927 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 1467 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1777 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installinfo.1.gz -rw-r--r-- root/root 1491 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1335 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 1970 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1558 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1285 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installmime.1.gz -rw-r--r-- root/root 1721 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1374 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installpam.1.gz -rw-r--r-- root/root 1413 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installppp.1.gz -rw-r--r-- root/root 1540 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installudev.1.gz -rw-r--r-- root/root 1881 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installwm.1.gz -rw-r--r-- root/root 1682 2026-06-16 18:44 ./usr/share/man/es/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 1396 2026-06-16 18:44 ./usr/share/man/es/man1/dh_lintian.1.gz -rw-r--r-- root/root 1298 2026-06-16 18:44 ./usr/share/man/es/man1/dh_listpackages.1.gz -rw-r--r-- root/root 1461 2026-06-16 18:44 ./usr/share/man/es/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2035 2026-06-16 18:44 ./usr/share/man/es/man1/dh_movefiles.1.gz -rw-r--r-- root/root 1949 2026-06-16 18:44 ./usr/share/man/es/man1/dh_perl.1.gz -rw-r--r-- root/root 1508 2026-06-16 18:44 ./usr/share/man/es/man1/dh_prep.1.gz -rw-r--r-- root/root 2455 2026-06-16 18:44 ./usr/share/man/es/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 1317 2026-06-16 18:44 ./usr/share/man/es/man1/dh_testdir.1.gz -rw-r--r-- root/root 1951 2026-06-16 18:44 ./usr/share/man/es/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/es/man7/ -rw-r--r-- root/root 2811 2026-06-16 18:44 ./usr/share/man/es/man7/debhelper-obsolete-compat.7.gz drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/fr/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/fr/man1/ -rw-r--r-- root/root 9405 2026-06-16 18:44 ./usr/share/man/fr/man1/dh.1.gz -rw-r--r-- root/root 1783 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1860 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1911 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2453 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1893 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1976 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1840 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2226 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_clean.1.gz -rw-r--r-- root/root 2248 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_compress.1.gz -rw-r--r-- root/root 2469 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_dwz.1.gz -rw-r--r-- root/root 1949 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1815 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1782 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_icons.1.gz -rw-r--r-- root/root 3892 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_install.1.gz -rw-r--r-- root/root 2188 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 2745 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installchangelogs.1.gz -rw-r--r-- root/root 1628 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installcron.1.gz -rw-r--r-- root/root 4350 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installdeb.1.gz -rw-r--r-- root/root 3622 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installdebconf.1.gz -rw-r--r-- root/root 2081 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installdirs.1.gz -rw-r--r-- root/root 4293 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installdocs.1.gz -rw-r--r-- root/root 2141 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 2710 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installexamples.1.gz -rw-r--r-- root/root 1669 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1959 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installinfo.1.gz -rw-r--r-- root/root 4287 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installinit.1.gz -rw-r--r-- root/root 2143 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installinitramfs.1.gz -rw-r--r-- root/root 1714 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1537 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 3517 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installman.1.gz -rw-r--r-- root/root 2118 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1730 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1472 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installmime.1.gz -rw-r--r-- root/root 1932 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1560 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installpam.1.gz -rw-r--r-- root/root 1577 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installppp.1.gz -rw-r--r-- root/root 1758 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installudev.1.gz -rw-r--r-- root/root 2174 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installwm.1.gz -rw-r--r-- root/root 1890 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 2630 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_link.1.gz -rw-r--r-- root/root 1596 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_lintian.1.gz -rw-r--r-- root/root 1520 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_listpackages.1.gz -rw-r--r-- root/root 4403 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_makeshlibs.1.gz -rw-r--r-- root/root 1678 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2345 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_movefiles.1.gz -rw-r--r-- root/root 2160 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_perl.1.gz -rw-r--r-- root/root 1732 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_prep.1.gz -rw-r--r-- root/root 2604 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 3189 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_strip.1.gz -rw-r--r-- root/root 2633 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_systemd_enable.1.gz -rw-r--r-- root/root 2361 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_systemd_start.1.gz -rw-r--r-- root/root 1520 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_testdir.1.gz -rw-r--r-- root/root 2106 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_testroot.1.gz -rw-r--r-- root/root 2210 2026-06-16 18:44 ./usr/share/man/fr/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/fr/man7/ -rw-r--r-- root/root 14681 2026-06-16 18:44 ./usr/share/man/fr/man7/debhelper-compat-upgrade-checklist.7.gz -rw-r--r-- root/root 3012 2026-06-16 18:44 ./usr/share/man/fr/man7/debhelper-obsolete-compat.7.gz -rw-r--r-- root/root 15720 2026-06-16 18:44 ./usr/share/man/fr/man7/debhelper.7.gz drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/ja/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/ja/man1/ -rw-r--r-- root/root 1682 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1834 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1795 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2386 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1836 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1844 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1822 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2197 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_clean.1.gz -rw-r--r-- root/root 2204 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_compress.1.gz -rw-r--r-- root/root 1807 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1697 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1635 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_icons.1.gz -rw-r--r-- root/root 2106 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 1441 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installcron.1.gz -rw-r--r-- root/root 2019 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 1530 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1831 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installinfo.1.gz -rw-r--r-- root/root 1542 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1399 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 2198 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1612 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1283 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installmime.1.gz -rw-r--r-- root/root 1842 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1367 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installpam.1.gz -rw-r--r-- root/root 1494 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installppp.1.gz -rw-r--r-- root/root 1647 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installudev.1.gz -rw-r--r-- root/root 2051 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installwm.1.gz -rw-r--r-- root/root 1802 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 1484 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_lintian.1.gz -rw-r--r-- root/root 1339 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_listpackages.1.gz -rw-r--r-- root/root 1522 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2321 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_movefiles.1.gz -rw-r--r-- root/root 2211 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_perl.1.gz -rw-r--r-- root/root 1603 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_prep.1.gz -rw-r--r-- root/root 2765 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 3338 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_strip.1.gz -rw-r--r-- root/root 1432 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_testdir.1.gz -rw-r--r-- root/root 2153 2026-06-16 18:44 ./usr/share/man/ja/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/ja/man7/ -rw-r--r-- root/root 3115 2026-06-16 18:44 ./usr/share/man/ja/man7/debhelper-obsolete-compat.7.gz drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/man1/ -rw-r--r-- root/root 8237 2026-06-16 18:44 ./usr/share/man/man1/dh.1.gz -rw-r--r-- root/root 14992 2026-06-16 18:44 ./usr/share/man/man1/dh_assistant.1.gz -rw-r--r-- root/root 1415 2026-06-16 18:44 ./usr/share/man/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1474 2026-06-16 18:44 ./usr/share/man/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1529 2026-06-16 18:44 ./usr/share/man/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 1967 2026-06-16 18:44 ./usr/share/man/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1528 2026-06-16 18:44 ./usr/share/man/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1600 2026-06-16 18:44 ./usr/share/man/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1510 2026-06-16 18:44 ./usr/share/man/man1/dh_builddeb.1.gz -rw-r--r-- root/root 1779 2026-06-16 18:44 ./usr/share/man/man1/dh_clean.1.gz -rw-r--r-- root/root 1833 2026-06-16 18:44 ./usr/share/man/man1/dh_compress.1.gz -rw-r--r-- root/root 1292 2026-06-16 18:44 ./usr/share/man/man1/dh_computeautosubstvars.1.gz -rw-r--r-- root/root 2023 2026-06-16 18:44 ./usr/share/man/man1/dh_dwz.1.gz -rw-r--r-- root/root 1583 2026-06-16 18:44 ./usr/share/man/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1445 2026-06-16 18:44 ./usr/share/man/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1388 2026-06-16 18:44 ./usr/share/man/man1/dh_icons.1.gz -rw-r--r-- root/root 3198 2026-06-16 18:44 ./usr/share/man/man1/dh_install.1.gz -rw-r--r-- root/root 1562 2026-06-16 18:44 ./usr/share/man/man1/dh_installalternatives.1.gz -rw-r--r-- root/root 1775 2026-06-16 18:44 ./usr/share/man/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 2254 2026-06-16 18:44 ./usr/share/man/man1/dh_installchangelogs.1.gz -rw-r--r-- root/root 1294 2026-06-16 18:44 ./usr/share/man/man1/dh_installcron.1.gz -rw-r--r-- root/root 3722 2026-06-16 18:44 ./usr/share/man/man1/dh_installdeb.1.gz -rw-r--r-- root/root 3076 2026-06-16 18:44 ./usr/share/man/man1/dh_installdebconf.1.gz -rw-r--r-- root/root 1674 2026-06-16 18:44 ./usr/share/man/man1/dh_installdirs.1.gz -rw-r--r-- root/root 3716 2026-06-16 18:44 ./usr/share/man/man1/dh_installdocs.1.gz -rw-r--r-- root/root 1718 2026-06-16 18:44 ./usr/share/man/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 2277 2026-06-16 18:44 ./usr/share/man/man1/dh_installexamples.1.gz -rw-r--r-- root/root 1517 2026-06-16 18:44 ./usr/share/man/man1/dh_installgsettings.1.gz -rw-r--r-- root/root 1328 2026-06-16 18:44 ./usr/share/man/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1596 2026-06-16 18:44 ./usr/share/man/man1/dh_installinfo.1.gz -rw-r--r-- root/root 3816 2026-06-16 18:44 ./usr/share/man/man1/dh_installinit.1.gz -rw-r--r-- root/root 1689 2026-06-16 18:44 ./usr/share/man/man1/dh_installinitramfs.1.gz -rw-r--r-- root/root 1355 2026-06-16 18:44 ./usr/share/man/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1209 2026-06-16 18:44 ./usr/share/man/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 2893 2026-06-16 18:44 ./usr/share/man/man1/dh_installman.1.gz -rw-r--r-- root/root 1735 2026-06-16 18:44 ./usr/share/man/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1366 2026-06-16 18:44 ./usr/share/man/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1158 2026-06-16 18:44 ./usr/share/man/man1/dh_installmime.1.gz -rw-r--r-- root/root 1541 2026-06-16 18:44 ./usr/share/man/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1226 2026-06-16 18:44 ./usr/share/man/man1/dh_installpam.1.gz -rw-r--r-- root/root 1265 2026-06-16 18:44 ./usr/share/man/man1/dh_installppp.1.gz -rw-r--r-- root/root 3043 2026-06-16 18:44 ./usr/share/man/man1/dh_installsystemd.1.gz -rw-r--r-- root/root 1925 2026-06-16 18:44 ./usr/share/man/man1/dh_installsystemduser.1.gz -rw-r--r-- root/root 1438 2026-06-16 18:44 ./usr/share/man/man1/dh_installsysusers.1.gz -rw-r--r-- root/root 1685 2026-06-16 18:44 ./usr/share/man/man1/dh_installtmpfiles.1.gz -rw-r--r-- root/root 1386 2026-06-16 18:44 ./usr/share/man/man1/dh_installudev.1.gz -rw-r--r-- root/root 1706 2026-06-16 18:44 ./usr/share/man/man1/dh_installwm.1.gz -rw-r--r-- root/root 1511 2026-06-16 18:44 ./usr/share/man/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 2113 2026-06-16 18:44 ./usr/share/man/man1/dh_link.1.gz -rw-r--r-- root/root 1254 2026-06-16 18:44 ./usr/share/man/man1/dh_lintian.1.gz -rw-r--r-- root/root 1151 2026-06-16 18:44 ./usr/share/man/man1/dh_listpackages.1.gz -rw-r--r-- root/root 3800 2026-06-16 18:44 ./usr/share/man/man1/dh_makeshlibs.1.gz -rw-r--r-- root/root 1318 2026-06-16 18:44 ./usr/share/man/man1/dh_md5sums.1.gz -rw-r--r-- root/root 1962 2026-06-16 18:44 ./usr/share/man/man1/dh_missing.1.gz -rw-r--r-- root/root 1891 2026-06-16 18:44 ./usr/share/man/man1/dh_movefiles.1.gz -rw-r--r-- root/root 2216 2026-06-16 18:44 ./usr/share/man/man1/dh_movetousr.1.gz -rw-r--r-- root/root 1764 2026-06-16 18:44 ./usr/share/man/man1/dh_perl.1.gz -rw-r--r-- root/root 1355 2026-06-16 18:44 ./usr/share/man/man1/dh_prep.1.gz -rw-r--r-- root/root 2160 2026-06-16 18:44 ./usr/share/man/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 2697 2026-06-16 18:44 ./usr/share/man/man1/dh_strip.1.gz -rw-r--r-- root/root 2239 2026-06-16 18:44 ./usr/share/man/man1/dh_systemd_enable.1.gz -rw-r--r-- root/root 1951 2026-06-16 18:44 ./usr/share/man/man1/dh_systemd_start.1.gz -rw-r--r-- root/root 1184 2026-06-16 18:44 ./usr/share/man/man1/dh_testdir.1.gz -rw-r--r-- root/root 1756 2026-06-16 18:44 ./usr/share/man/man1/dh_testroot.1.gz -rw-r--r-- root/root 1683 2026-06-16 18:44 ./usr/share/man/man1/dh_ucf.1.gz -rw-r--r-- root/root 1152 2026-06-16 18:44 ./usr/share/man/man1/dh_update_autotools_config.1.gz -rw-r--r-- root/root 1839 2026-06-16 18:44 ./usr/share/man/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/man7/ -rw-r--r-- root/root 13018 2026-06-16 18:44 ./usr/share/man/man7/debhelper-compat-upgrade-checklist.7.gz -rw-r--r-- root/root 2501 2026-06-16 18:44 ./usr/share/man/man7/debhelper-obsolete-compat.7.gz -rw-r--r-- root/root 15488 2026-06-16 18:44 ./usr/share/man/man7/debhelper.7.gz drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/pt/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/pt/man1/ -rw-r--r-- root/root 8931 2026-06-16 18:44 ./usr/share/man/pt/man1/dh.1.gz -rw-r--r-- root/root 1629 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1688 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1726 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2244 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1720 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1811 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1702 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2054 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_clean.1.gz -rw-r--r-- root/root 2111 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_compress.1.gz -rw-r--r-- root/root 2254 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_dwz.1.gz -rw-r--r-- root/root 1803 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1649 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1601 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_icons.1.gz -rw-r--r-- root/root 3499 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_install.1.gz -rw-r--r-- root/root 1999 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 2584 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installchangelogs.1.gz -rw-r--r-- root/root 1466 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installcron.1.gz -rw-r--r-- root/root 4107 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installdeb.1.gz -rw-r--r-- root/root 3408 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installdebconf.1.gz -rw-r--r-- root/root 1892 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installdirs.1.gz -rw-r--r-- root/root 4064 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installdocs.1.gz -rw-r--r-- root/root 1943 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 2518 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installexamples.1.gz -rw-r--r-- root/root 1496 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1798 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installinfo.1.gz -rw-r--r-- root/root 4147 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installinit.1.gz -rw-r--r-- root/root 1906 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installinitramfs.1.gz -rw-r--r-- root/root 1544 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1381 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 3182 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installman.1.gz -rw-r--r-- root/root 1980 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1551 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1328 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installmime.1.gz -rw-r--r-- root/root 1748 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1416 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installpam.1.gz -rw-r--r-- root/root 1448 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installppp.1.gz -rw-r--r-- root/root 1582 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installudev.1.gz -rw-r--r-- root/root 1955 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installwm.1.gz -rw-r--r-- root/root 1729 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 2396 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_link.1.gz -rw-r--r-- root/root 1430 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_lintian.1.gz -rw-r--r-- root/root 1321 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_listpackages.1.gz -rw-r--r-- root/root 4162 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_makeshlibs.1.gz -rw-r--r-- root/root 1509 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2094 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_movefiles.1.gz -rw-r--r-- root/root 1984 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_perl.1.gz -rw-r--r-- root/root 1557 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_prep.1.gz -rw-r--r-- root/root 2436 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 2955 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_strip.1.gz -rw-r--r-- root/root 2507 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_systemd_enable.1.gz -rw-r--r-- root/root 2211 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_systemd_start.1.gz -rw-r--r-- root/root 1351 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_testdir.1.gz -rw-r--r-- root/root 1919 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_testroot.1.gz -rw-r--r-- root/root 2029 2026-06-16 18:44 ./usr/share/man/pt/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/man/pt/man7/ -rw-r--r-- root/root 13899 2026-06-16 18:44 ./usr/share/man/pt/man7/debhelper-compat-upgrade-checklist.7.gz -rw-r--r-- root/root 2868 2026-06-16 18:44 ./usr/share/man/pt/man7/debhelper-obsolete-compat.7.gz -rw-r--r-- root/root 15006 2026-06-16 18:44 ./usr/share/man/pt/man7/debhelper.7.gz libdebhelper-perl_14.1_all.deb ------------------------------ new Debian package, version 2.0. size 77064 bytes: control archive=2852 bytes. 536 bytes, 17 lines control 7331 bytes, 85 lines md5sums Package: libdebhelper-perl Source: debhelper Version: 14.1 Architecture: all Maintainer: Debhelper Maintainers Installed-Size: 344 Depends: perl:any Breaks: debhelper (<< 12.6~) Replaces: debhelper (<< 12.6~) Section: perl Priority: optional Multi-Arch: foreign Description: debhelper perl modules A collection of programs that can be used in a debian/rules file to automate common tasks related to building Debian packages. . This package provides the perl modules used by the scripts in debhelper. drwxr-xr-x root/root 0 2026-06-16 18:44 ./ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/debhelper/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/ -rw-r--r-- root/root 41 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/maintscript-helper -rw-r--r-- root/root 174 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-alternatives -rw-r--r-- root/root 335 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-emacsen -rw-r--r-- root/root 215 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-icons -rw-r--r-- root/root 333 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-init -rw-r--r-- root/root 238 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-init-nostart -rw-r--r-- root/root 416 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-init-restart -rw-r--r-- root/root 201 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-init-tmpfiles -rw-r--r-- root/root 135 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-menu -rw-r--r-- root/root 187 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-menu-method -rw-r--r-- root/root 231 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-modules -rw-r--r-- root/root 656 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-systemd-dont-enable -rw-r--r-- root/root 741 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-systemd-enable -rw-r--r-- root/root 397 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-systemd-restart -rw-r--r-- root/root 345 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-systemd-restartnostart -rw-r--r-- root/root 305 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-systemd-start -rw-r--r-- root/root 693 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-systemd-user-dont-enable -rw-r--r-- root/root 770 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-systemd-user-enable -rw-r--r-- root/root 634 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-systemd-user-restart -rw-r--r-- root/root 202 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-sysusers -rw-r--r-- root/root 121 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-ucf -rw-r--r-- root/root 666 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-usrlocal -rw-r--r-- root/root 310 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-wm -rw-r--r-- root/root 223 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-wm-noman -rw-r--r-- root/root 59 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postinst-xfonts -rw-r--r-- root/root 112 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-debconf -rw-r--r-- root/root 83 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-icons -rw-r--r-- root/root 213 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-init -rw-r--r-- root/root 261 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-init-tmpfiles-purge -rw-r--r-- root/root 215 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-init-tmpfiles-remove -rw-r--r-- root/root 110 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-menu -rw-r--r-- root/root 211 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-menu-method -rw-r--r-- root/root 99 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-modules -rw-r--r-- root/root 55 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-sgmlcatalog -rw-r--r-- root/root 88 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-systemd -rw-r--r-- root/root 114 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-systemd-reload-only -rw-r--r-- root/root 95 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-systemd-user -rw-r--r-- root/root 376 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-systemd-user-reload-only -rw-r--r-- root/root 254 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-ucf -rw-r--r-- root/root 59 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/postrm-xfonts -rw-r--r-- root/root 255 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/preinst-emacsen -rw-r--r-- root/root 134 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/preinst-init-chmod -rw-r--r-- root/root 153 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/preinst-init-stop -rw-r--r-- root/root 141 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/preinst-systemd-stop -rw-r--r-- root/root 66 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/prerm-alternatives -rw-r--r-- root/root 198 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/prerm-emacsen -rw-r--r-- root/root 130 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/prerm-init -rw-r--r-- root/root 152 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/prerm-init-norestart -rw-r--r-- root/root 118 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/prerm-systemd -rw-r--r-- root/root 140 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/prerm-systemd-restart -rw-r--r-- root/root 147 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/prerm-systemd-user-stop -rw-r--r-- root/root 89 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/prerm-usrlocal -rw-r--r-- root/root 84 2026-06-16 18:44 ./usr/share/debhelper/autoscripts/prerm-wm drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/debputy/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/debputy/debputy/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/debputy/debputy/plugins/ -rw-r--r-- root/root 16649 2026-06-16 18:44 ./usr/share/debputy/debputy/plugins/debhelper-documentation.json drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/doc/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/doc/libdebhelper-perl/ -rw-r--r-- root/root 8663 2026-06-16 18:44 ./usr/share/doc/libdebhelper-perl/changelog.gz -rw-r--r-- root/root 4199 2026-06-16 18:44 ./usr/share/doc/libdebhelper-perl/copyright drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/perl5/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/perl5/Debian/ drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/ -rw-r--r-- root/root 19160 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem.pm drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/ -rw-r--r-- root/root 1057 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/ant.pm -rw-r--r-- root/root 2939 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/autoconf.pm -rw-r--r-- root/root 6532 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/cmake.pm -rw-r--r-- root/root 5808 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/makefile.pm -rw-r--r-- root/root 4907 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/meson.pm -rw-r--r-- root/root 1794 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/ninja.pm -rw-r--r-- root/root 2483 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/perl_build.pm -rw-r--r-- root/root 2875 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/perl_makemaker.pm -rw-r--r-- root/root 5585 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/python_distutils.pm -rw-r--r-- root/root 2460 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/qmake.pm -rw-r--r-- root/root 306 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/qmake6.pm drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/DH/ -rw-r--r-- root/root 8709 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/DH/AddonAPI.pm -rw-r--r-- root/root 967 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/DH/SequenceState.pm -rw-r--r-- root/root 8972 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Dh_Buildsystems.pm -rw-r--r-- root/root 9585 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Dh_Getopt.pm -rw-r--r-- root/root 106070 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Dh_Lib.pm -rw-r--r-- root/root 57 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Dh_Version.pm -rw-r--r-- root/root 3649 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Sequence.pm drwxr-xr-x root/root 0 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Sequence/ -rw-r--r-- root/root 280 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Sequence/build_stamp.pm -rw-r--r-- root/root 290 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Sequence/dwz.pm -rw-r--r-- root/root 297 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Sequence/elf_tools.pm -rw-r--r-- root/root 330 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Sequence/installinitramfs.pm -rw-r--r-- root/root 126 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Sequence/installsysusers.pm -rw-r--r-- root/root 162 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Sequence/movetousr.pm -rw-r--r-- root/root 3000 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Sequence/root_sequence.pm -rw-r--r-- root/root 2140 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Sequence/single_binary.pm -rw-r--r-- root/root 610 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/Sequence/systemd.pm -rw-r--r-- root/root 31832 2026-06-16 18:44 ./usr/share/perl5/Debian/Debhelper/SequencerUtil.pm +------------------------------------------------------------------------------+ | Post Build Wed, 17 Jun 2026 00:03:01 +0000 | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup Wed, 17 Jun 2026 00:03:01 +0000 | +------------------------------------------------------------------------------+ Purging /build/debhelper-74j5aY Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary Wed, 17 Jun 2026 00:03:01 +0000 | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 15584 Build-Time: 75 Distribution: perl-5.42-throwaway Host Architecture: amd64 Install-Time: 5 Job: /srv/debomatic/incoming/debhelper_14.1.dsc Machine Architecture: amd64 Package: debhelper Package-Time: 83 Source-Version: 14.1 Space: 15584 Status: successful Version: 14.1 -------------------------------------------------------------------------------- Finished at 2026-06-17T00:03:00Z Build needed 00:01:23, 15584k disk space