sbuild (Debian sbuild) 0.91.9 (05 May 2026) on carme.larted.org.uk +==============================================================================+ | debhelper 13.32 (amd64) Sun, 07 Jun 2026 16:01:35 +0000 | +==============================================================================+ Package: debhelper Version: 13.32 Source Version: 13.32 Distribution: perl-5.42-throwaway Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: Setting up the chroot... I: Creating chroot session... I: Setting up log color... +------------------------------------------------------------------------------+ | Chroot Setup Commands Sun, 07 Jun 2026 16:01:36 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup debhelper_13.32 perl-5.42-throwaway amd64 ---------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup debhelper_13.32 perl-5.42-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: Setting up apt archive... +------------------------------------------------------------------------------+ | Update chroot Sun, 07 Jun 2026 16:01:36 +0000 | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.42 InRelease [3042 B] Hit:2 http://deb.debian.org/debian unstable InRelease Hit:3 http://deb.debian.org/debian sid InRelease Get:1 file:/srv/reprepro perl-5.42 InRelease [3042 B] Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files Sun, 07 Jun 2026 16:01:38 +0000 | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/debhelper_13.32.dsc exists in /srv/debomatic/incoming; copying to chroot +------------------------------------------------------------------------------+ | Install package build dependencies Sun, 07 Jun 2026 16:01:38 +0000 | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: dpkg-dev (>= 1.18.0~), perl:any, po4a, build-essential Filtered Build-Depends: dpkg-dev (>= 1.18.0~), perl:any, po4a, build-essential dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/build/debhelper-xxgOmT/resolver-dfaUgU/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/build/debhelper-xxgOmT/resolver-dfaUgU/apt_archive ./ InRelease Get:2 copy:/build/debhelper-xxgOmT/resolver-dfaUgU/apt_archive ./ Release [609 B] Ign:3 copy:/build/debhelper-xxgOmT/resolver-dfaUgU/apt_archive ./ Release.gpg Get:4 copy:/build/debhelper-xxgOmT/resolver-dfaUgU/apt_archive ./ Sources [701 B] Get:5 copy:/build/debhelper-xxgOmT/resolver-dfaUgU/apt_archive ./ Packages [653 B] Fetched 1963 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: gettext gettext-base libclass-inspector-perl libfile-sharedir-perl libosp5 libpod-parser-perl libsgmls-perl libsyntax-keyword-try-perl libxml2-16 libxs-parse-keyword-perl libyaml-tiny-perl opensp po4a sgml-base Suggested packages: autopoint gettext-doc libasprintf-dev libgettextpo-dev gnulib-l10n sgmlspl sgmls-doc doc-base sgml-data sgml-base-doc Recommended packages: curl | wget | lynx liblocale-gettext-perl libterm-readkey-perl libtext-wrapi18n-perl libunicode-linebreak-perl The following NEW packages will be installed: gettext gettext-base libclass-inspector-perl libfile-sharedir-perl libosp5 libpod-parser-perl libsgmls-perl libsyntax-keyword-try-perl libxml2-16 libxs-parse-keyword-perl libyaml-tiny-perl opensp po4a sbuild-build-depends-main-dummy sgml-base 0 upgraded, 15 newly installed, 0 to remove and 0 not upgraded. Need to get 7500 kB/7594 kB of archives. After this operation, 28.0 MB of additional disk space will be used. Get:1 copy:/build/debhelper-xxgOmT/resolver-dfaUgU/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [868 B] Get:2 file:/srv/reprepro perl-5.42/main amd64 libxs-parse-keyword-perl amd64 0.49-1+b1 [66.2 kB] Get:3 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.26-1 [315 kB] Get:4 file:/srv/reprepro perl-5.42/main amd64 libsyntax-keyword-try-perl amd64 0.31-1+b1 [27.2 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 libxml2-16 amd64 2.15.3+dfsg-1 [642 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.26-1 [2311 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 libclass-inspector-perl all 1.36-3 [17.5 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 libfile-sharedir-perl all 1.118-3 [16.0 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 libosp5 amd64 1.5.2-15.2 [972 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 libpod-parser-perl all 1.67-1 [94.1 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 libsgmls-perl all 1.03ii-38 [23.7 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 libyaml-tiny-perl all 1.76-1 [29.8 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 sgml-base all 1.31+nmu1 [10.9 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 opensp amd64 1.5.2-15.2 [448 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 po4a all 0.74-1 [2619 kB] Fetched 7500 kB in 0s (84.0 MB/s) Selecting previously unselected package gettext-base. (Reading database ... 23461 files and directories currently installed.) Preparing to unpack .../00-gettext-base_0.26-1_amd64.deb ... Unpacking gettext-base (0.26-1) ... Selecting previously unselected package libxml2-16:amd64. Preparing to unpack .../01-libxml2-16_2.15.3+dfsg-1_amd64.deb ... Unpacking libxml2-16:amd64 (2.15.3+dfsg-1) ... Selecting previously unselected package gettext. Preparing to unpack .../02-gettext_0.26-1_amd64.deb ... Unpacking gettext (0.26-1) ... Selecting previously unselected package libclass-inspector-perl. Preparing to unpack .../03-libclass-inspector-perl_1.36-3_all.deb ... Unpacking libclass-inspector-perl (1.36-3) ... Selecting previously unselected package libfile-sharedir-perl. Preparing to unpack .../04-libfile-sharedir-perl_1.118-3_all.deb ... Unpacking libfile-sharedir-perl (1.118-3) ... Selecting previously unselected package libosp5. Preparing to unpack .../05-libosp5_1.5.2-15.2_amd64.deb ... Unpacking libosp5 (1.5.2-15.2) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../06-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libsgmls-perl. Preparing to unpack .../07-libsgmls-perl_1.03ii-38_all.deb ... Unpacking libsgmls-perl (1.03ii-38) ... Selecting previously unselected package libxs-parse-keyword-perl. Preparing to unpack .../08-libxs-parse-keyword-perl_0.49-1+b1_amd64.deb ... Unpacking libxs-parse-keyword-perl (0.49-1+b1) ... Selecting previously unselected package libsyntax-keyword-try-perl. Preparing to unpack .../09-libsyntax-keyword-try-perl_0.31-1+b1_amd64.deb ... Unpacking libsyntax-keyword-try-perl (0.31-1+b1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../10-libyaml-tiny-perl_1.76-1_all.deb ... Unpacking libyaml-tiny-perl (1.76-1) ... Selecting previously unselected package sgml-base. Preparing to unpack .../11-sgml-base_1.31+nmu1_all.deb ... Unpacking sgml-base (1.31+nmu1) ... Selecting previously unselected package opensp. Preparing to unpack .../12-opensp_1.5.2-15.2_amd64.deb ... Unpacking opensp (1.5.2-15.2) ... Selecting previously unselected package po4a. Preparing to unpack .../13-po4a_0.74-1_all.deb ... Unpacking po4a (0.74-1) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../14-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libsgmls-perl (1.03ii-38) ... Setting up libclass-inspector-perl (1.36-3) ... Setting up libxml2-16:amd64 (2.15.3+dfsg-1) ... Setting up gettext-base (0.26-1) ... Setting up libyaml-tiny-perl (1.76-1) ... Setting up libosp5 (1.5.2-15.2) ... Setting up libpod-parser-perl (1.67-1) ... Setting up libfile-sharedir-perl (1.118-3) ... Setting up sgml-base (1.31+nmu1) ... Setting up gettext (0.26-1) ... Setting up opensp (1.5.2-15.2) ... Setting up libxs-parse-keyword-perl (0.49-1+b1) ... Setting up libsyntax-keyword-try-perl (0.31-1+b1) ... Setting up po4a (0.74-1) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.42-16) ... +------------------------------------------------------------------------------+ | Check architectures Sun, 07 Jun 2026 16:01:42 +0000 | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Build environment Sun, 07 Jun 2026 16:01:42 +0000 | +------------------------------------------------------------------------------+ Kernel: Linux 7.0.10+deb14-amd64 #1 SMP PREEMPT_DYNAMIC Debian 7.0.10-1 (2026-05-27) amd64 (x86_64) Toolchain package versions: binutils_2.46-3 dpkg-dev_1.23.7 g++-14_14.3.0-14 g++-15_15.2.0-17 gcc-14_14.3.0-14 gcc-15_15.2.0-17 libc6-dev_2.42-16 libstdc++-14-dev_14.3.0-14 libstdc++-15-dev_15.2.0-17 libstdc++6_16.1.0-1 linux-libc-dev_7.0.10-1 Package versions: adduser_3.156 apt_3.3.1 base-files_14.2 base-passwd_3.6.8 bash_5.3-3 binutils_2.46-3 binutils-common_2.46-3 binutils-gold_2.44-3 binutils-gold-x86-64-linux-gnu_2.44-3 binutils-x86-64-linux-gnu_2.46-3 bsdutils_1:2.42.1-2 build-essential_12.12 bzip2_1.0.8-6+b2 coreutils_9.10-1 cpp_4:15.2.0-5+b1 cpp-14_14.3.0-14 cpp-14-x86-64-linux-gnu_14.3.0-14 cpp-15_15.2.0-17 cpp-15-x86-64-linux-gnu_15.2.0-17 cpp-x86-64-linux-gnu_4:15.2.0-5+b1 dash_0.5.12-12 debconf_1.5.92 debian-archive-keyring_2025.1 debianutils_5.23.2 diffutils_1:3.12-1 dirmngr_2.4.9-4 dpkg_1.23.7 dpkg-dev_1.23.7 eatmydata_131-2 findutils_4.10.0-4 g++_4:15.2.0-5+b1 g++-14_14.3.0-14 g++-14-x86-64-linux-gnu_14.3.0-14 g++-15_15.2.0-17 g++-15-x86-64-linux-gnu_15.2.0-17 g++-x86-64-linux-gnu_4:15.2.0-5+b1 gcc_4:15.2.0-5+b1 gcc-14_14.3.0-14 gcc-14-base_14.3.0-14 gcc-14-x86-64-linux-gnu_14.3.0-14 gcc-15_15.2.0-17 gcc-15-base_15.2.0-17 gcc-15-x86-64-linux-gnu_15.2.0-17 gcc-16-base_16.1.0-1 gcc-x86-64-linux-gnu_4:15.2.0-5+b1 gettext_0.26-1 gettext-base_0.26-1 gnupg_2.4.9-4 gnupg-l10n_2.4.9-4 gpg_2.4.9-4 gpg-agent_2.4.9-4 gpgconf_2.4.9-4 gpgsm_2.4.9-4 grep_3.12-1 gzip_1.13-1 hostname_3.25 init-system-helpers_1.69 libacl1_2.3.2-3 libapt-pkg7.0_3.3.1 libasan8_16.1.0-1 libassuan9_3.0.2-2+b2 libatomic1_16.1.0-1 libattr1_1:2.5.2-4 libaudit-common_1:4.1.2-1 libaudit1_1:4.1.2-1+b1 libbinutils_2.46-3 libblkid1_2.42.1-2 libbsd0_0.12.2-3 libbz2-1.0_1.0.8-6+b2 libc-bin_2.42-16 libc-dev-bin_2.42-16 libc-gconv-modules-extra_2.42-16 libc-l10n_2.42-16 libc6_2.42-16 libc6-dev_2.42-16 libcap-ng0_0.9.3-1 libcap2_1:2.78-1 libcc1-0_16.1.0-1 libclass-inspector-perl_1.36-3 libcrypt-dev_1:4.5.1-1+b1 libcrypt1_1:4.5.1-1+b1 libctf-nobfd0_2.46-3 libctf0_2.46-3 libdb5.3t64_5.3.28+dfsg2-11+b1 libdebconfclient0_0.283 libdpkg-perl_1.23.7 libeatmydata1_131-2+b2 libffi8_3.5.2-4 libfile-sharedir-perl_1.118-3 libgcc-14-dev_14.3.0-14 libgcc-15-dev_15.2.0-17 libgcc-s1_16.1.0-1 libgcrypt20_1.12.2-1 libgdbm-compat4t64_1.26-1+b2 libgdbm6t64_1.26-1+b2 libgmp10_2:6.3.0+dfsg-5+b2 libgnutls30t64_3.8.13-1 libgomp1_16.1.0-1 libgpg-error0_1.61-2 libgprofng0_2.46-3 libhogweed6t64_3.10.2-1+b1 libhwasan0_16.1.0-1 libidn2-0_2.3.8-5 libisl23_0.27-2 libitm1_16.1.0-1 libjansson4_2.14-2+b4 libksba8_1.8.0-3 liblastlog2-2_2.42.1-2 libldap2_2.6.10+dfsg-1+b3 liblsan0_16.1.0-1 liblz4-1_1.10.0-10 liblzma5_5.8.3-1 libmd0_1.2.0-2 libmount1_2.42.1-2 libmpc3_1.3.1-3 libmpfr6_4.2.2-3 libncursesw6_6.6+20251231-1+b1 libnettle8t64_3.10.2-1+b1 libnpth0t64_1.8-3+b2 libosp5_1.5.2-15.2 libp11-kit0_0.26.2-2 libpam-modules_1.7.0-5+b2 libpam-modules-bin_1.7.0-5+b2 libpam-runtime_1.7.0-5 libpam0g_1.7.0-5+b2 libpcre2-8-0_10.46-1+b2 libperl5.40_5.40.1-8 libperl5.42_5.42.2-2 libpod-parser-perl_1.67-1 libquadmath0_16.1.0-1 libreadline8t64_8.3-4 libsasl2-2_2.1.28+dfsg1-11 libsasl2-modules-db_2.1.28+dfsg1-11 libseccomp2_2.6.0-2+b1 libselinux1_3.10-1 libsemanage-common_3.10-1 libsemanage2_3.10-1 libsepol2_3.10-1 libsframe2_2.45.50.20251209-1+b1 libsframe3_2.46-3 libsgmls-perl_1.03ii-38 libsmartcols1_2.42.1-2 libsqlite3-0_3.46.1-9+b1 libssl3t64_3.6.2-1 libstdc++-14-dev_14.3.0-14 libstdc++-15-dev_15.2.0-17 libstdc++6_16.1.0-1 libsyntax-keyword-try-perl_0.31-1+b1 libsystemd0_261~rc3-1 libtasn1-6_4.21.0-2+b1 libtinfo6_6.6+20251231-1+b1 libtsan2_16.1.0-1 libubsan1_16.1.0-1 libudev1_261~rc3-1 libunistring5_1.4.2-1 libuuid1_2.42.1-2 libxml2-16_2.15.3+dfsg-1 libxs-parse-keyword-perl_0.49-1+b1 libxxhash0_0.8.3-2+b2 libyaml-tiny-perl_1.76-1 libzstd1_1.5.7+dfsg-3+b2 linux-libc-dev_7.0.10-1 locales-all_2.42-16 login.defs_1:4.19.3-2 make_4.4.1-3 mawk_1.3.4.20260302-1 ncurses-base_6.6+20251231-1 ncurses-bin_6.6+20251231-1+b1 opensp_1.5.2-15.2 openssl-provider-legacy_3.6.2-1 passwd_1:4.19.3-2 patch_2.8-2 perl_5.42.2-2 perl-base_5.42.2-2 perl-modules-5.40_5.40.1-8 perl-modules-5.42_5.42.2-2 pinentry-curses_1.3.2-4 po4a_0.74-1 readline-common_8.3-4 rpcsvc-proto_1.4.4-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-3 sgml-base_1.31+nmu1 sqv_1.3.0-5+b2 sysvinit-utils_3.18-1 tar_1.35+dfsg-4 util-linux_2.42.1-2 xz-utils_5.8.3-1 zlib1g_1:1.3.dfsg+really1.3.2-3 +------------------------------------------------------------------------------+ | Build Sun, 07 Jun 2026 16:01:42 +0000 | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (native) Source: debhelper Binary: debhelper, libdebhelper-perl Architecture: all Version: 13.32 Maintainer: Debhelper Maintainers Uploaders: Niels Thykier Standards-Version: 4.7.0 Vcs-Browser: https://salsa.debian.org/debian/debhelper Vcs-Git: https://salsa.debian.org/debian/debhelper.git Testsuite: autopkgtest-pkg-perl Build-Depends: dpkg-dev (>= 1.18.0~), libtest-pod-perl , man-db , perl:any, po4a Package-List: debhelper deb devel optional arch=all libdebhelper-perl deb perl optional arch=all Checksums-Sha1: 5694182415ff7d2c0fbee2787b8d3ed7af90bdec 642020 debhelper_13.32.tar.xz Checksums-Sha256: 18ff049f5361784a3bb3e67be87afe4773fb0c5382103a8004cb309d52eed384 642020 debhelper_13.32.tar.xz Files: b77ae4d0c0d74bffa49434c9a3341d58 642020 debhelper_13.32.tar.xz Dgit: c088bb59a191a52b21e103ff58bf9137a0842b42 debian archive/debian/13.32 https://git.dgit.debian.org/debhelper Git-Tag-Info: tag=6247fafde80bac480b2970f6ae3537a620952514 fp=f5e7199aef5e5c67e555873f740d68888365d289 Git-Tag-Tagger: Niels Thykier -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEN02M5NuW6cvUwJcqYG0ITkaDwHkFAmolWsQACgkQYG0ITkaD wHlsXRAAj7nf8z+gd4OA1+hBTbtqYdyGRrRw7YSuQ11RfVkRs/msb7UJ9wBsiFLI ebIySegFt5ME58aQdOQwEcuKzu37C9KZ3Z4VN3iYE8VzgvxAJzCVePjLdl9/+z8r 0EKHHrRj2L8ovWiyFoY0WxG57QQSC2C5RZWfe3GEhpoo30eQwhBBFfdOnCFBLDFd sfJeXwhbyZwBTYKe0Bxl2BN4ChAMpXEUoRICqANTmJo+dN5CsytzFImmwz3OpJa/ EJ0p/FLOZWqii5OpBEePnTBspwe1kgniPtZKIVefeyVbzwDlZu0fK6p41vQH9KTQ bY41G0iIoeIRXAsekMWBVepW6fOxrnvo7h5uHNjZ4o1Lk/yZm4f1bed2gPXTFNgn p0y8dbCsHO5Vfo3oH93VsmCk6suh8xPmQnp5XxHUx5RwAqf8Y9Qb/Q6rQHlmDYoT kNQc131eIFQh8hx2j2b6iCvX6emykPVP58COpsGtetQyRl5kL5HzS3L2dRs1UOyM hzNZIJTjPs8WxnIP6OGtUFiKgUhhlLr+j4NJEVgT+DlK5tFCQwXIjUiRQzKWQ+8C SGBlZe0aV2NDV8bi0GWY/HgeQTRCrV2C/djlWzjv5oUCwD7nb6pu8K/ZNbLqfzJ2 PN7EiEREBGF+80bcemr7dfb5s0nxI62KVZawRBfafkZfibeJy2I= =QLBE -----END PGP SIGNATURE----- dpkg-source: warning: cannot verify inline signature for ./debhelper_13.32.dsc: missing OpenPGP keyrings dpkg-source: info: verifying ./debhelper_13.32.dsc dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-keyring.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-tag2upload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-nonupload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-maintainers.pgp dpkg-source: info: extracting debhelper in /build/debhelper-xxgOmT/debhelper-13.32 dpkg-source: info: unpacking debhelper_13.32.tar.xz clean up apt cache ------------------ Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Time Build Commands Sun, 07 Jun 2026 16:01:43 +0000 | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network debhelper_13.32 perl-5.42-throwaway amd64 ---------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network debhelper_13.32 perl-5.42-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/build/debhelper-xxgOmT/debhelper-13.32 SCHROOT_ALIAS_NAME=perl-5.42-throwaway-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.42-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.42-amd64-debomatic-8c9a143b-1dbb-4eaa-9a39-282ef9921b97 SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc dpkg-buildpackage: info: source package debhelper dpkg-buildpackage: info: source version 13.32 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Niels Thykier dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean ./run dh clean --without autoreconf --with build-stamp dh_auto_clean make -j2 clean make[1]: Entering directory '/build/debhelper-xxgOmT/debhelper-13.32' rm -f *-stamp *.1 *.7 lib/Debian/Debhelper/Dh_Version.pm po4a --previous --rm-translations --rm-backups man/po4a/po4a.cfg po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! (1446 entries) for lang in de es fr ja pt; do \ if [ -e man/$lang ]; then rmdir man/$lang; fi; \ done; make[1]: Leaving directory '/build/debhelper-xxgOmT/debhelper-13.32' dh_clean dpkg-source -b . dpkg-source: info: using source format '3.0 (native)' dpkg-source: info: building debhelper in ../debhelper_13.32.tar.xz dpkg-source: info: building debhelper in ../debhelper_13.32.dsc debian/rules binary ./run dh binary --without autoreconf --with build-stamp dh_auto_configure dh_auto_build make -j2 INSTALL="install --strip-program=true" make[1]: Entering directory '/build/debhelper-xxgOmT/debhelper-13.32' po4a --previous -L UTF-8 man/po4a/po4a.cfg printf "package Debian::Debhelper::Dh_Version;\n\$version='13.32';\n1" > \ lib/Debian/Debhelper/Dh_Version.pm cat debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{13.32}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' dh_assistant dh_auto_build dh_auto_clean dh_auto_configure dh_auto_install dh_auto_test dh_bugfiles dh_builddeb dh_clean dh_compress dh_computeautosubstvars dh_dwz dh_fixperms dh_gencontrol dh_icons dh_install dh_installalternatives dh_installcatalogs dh_installchangelogs dh_installcron dh_installdeb dh_installdebconf dh_installdirs dh_installdocs dh_installemacsen dh_installexamples dh_installgsettings dh_installifupdown dh_installinfo dh_installinit dh_installinitramfs dh_installlogcheck dh_installlogrotate dh_installman dh_installmanpages dh_installmenu dh_installmime dh_installmodules dh_installpam dh_installppp dh_installsystemd dh_installsystemduser dh_installsysusers dh_installtmpfiles dh_installudev dh_installwm dh_installxfonts dh_link dh_lintian dh_listpackages dh_makeshlibs dh_md5sums dh_missing dh_movefiles dh_movetousr dh_perl dh_prep dh_shlibdeps dh_strip dh_systemd_enable dh_systemd_start dh_testdir dh_testroot dh_ucf dh_update_autotools_config dh_usrlocal | \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 > debhelper.7 pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.7 pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 debhelper-obsolete-compat.pod > debhelper-obsolete-compat.7 pod2man --utf8 -c Debhelper -r "13.32" dh_assistant dh_assistant.1 pod2man --utf8 -c Debhelper -r "13.32" dh_auto_build dh_auto_build.1 pod2man --utf8 -c Debhelper -r "13.32" dh_auto_clean dh_auto_clean.1 pod2man --utf8 -c Debhelper -r "13.32" dh_auto_configure dh_auto_configure.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_auto_install dh_auto_install.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_auto_test dh_auto_test.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_bugfiles dh_bugfiles.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_builddeb dh_builddeb.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_clean dh_clean.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_compress dh_compress.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_computeautosubstvars dh_computeautosubstvars.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_dwz dh_dwz.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_fixperms dh_fixperms.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_gencontrol dh_gencontrol.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_icons dh_icons.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_install dh_install.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/debhelper.pod (93 of 278 strings; only 33.45% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installalternatives dh_installalternatives.1 Discard man/es/debhelper-compat-upgrade-checklist.pod (145 of 351 strings; only 41.31% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installcatalogs dh_installcatalogs.1 Discard man/es/dh.pod (58 of 146 strings; only 39.72% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_clean.pod (19 of 29 strings; only 65.51% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installchangelogs dh_installchangelogs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_dwz.pod (12 of 25 strings; only 48% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_install.pod (28 of 50 strings; only 56% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installchangelogs.pod (25 of 33 strings; only 75.75% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installdeb.pod (23 of 63 strings; only 36.5% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.32" dh_installcron dh_installcron.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installdebconf.pod (28 of 53 strings; only 52.83% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installdirs.pod (19 of 28 strings; only 67.85% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installdocs.pod (44 of 62 strings; only 70.96% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.32" dh_installdeb dh_installdeb.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installexamples.pod (24 of 34 strings; only 70.58% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installinit.pod (38 of 65 strings; only 58.46% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.32" dh_installdebconf dh_installdebconf.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installinitramfs.pod (10 of 21 strings; only 47.61% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_installman.pod (28 of 38 strings; only 73.68% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installdirs dh_installdirs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_link.pod (28 of 36 strings; only 77.77% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installdocs dh_installdocs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_makeshlibs.pod (32 of 61 strings; only 52.45% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_strip.pod (23 of 43 strings; only 53.48% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_testroot.pod (12 of 21 strings; only 57.14% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installemacsen dh_installemacsen.1 Discard man/es/dh_systemd_enable.pod (9 of 37 strings; only 24.32% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/dh_systemd_start.pod (11 of 25 strings; only 44% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/es/strings-kept-translations.pod (0 of 2 strings; only 0% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.32" dh_installexamples dh_installexamples.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installgsettings dh_installgsettings.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installifupdown dh_installifupdown.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installinfo dh_installinfo.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installinit dh_installinit.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installinitramfs dh_installinitramfs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installlogcheck dh_installlogcheck.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installlogrotate dh_installlogrotate.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installman dh_installman.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installmanpages dh_installmanpages.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installmenu dh_installmenu.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installmime dh_installmime.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installmodules dh_installmodules.1 Discard man/ja/debhelper.pod (123 of 278 strings; only 44.24% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/debhelper-compat-upgrade-checklist.pod (171 of 351 strings; only 48.71% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installpam dh_installpam.1 Discard man/ja/dh.pod (64 of 146 strings; only 43.83% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installppp dh_installppp.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_dwz.pod (13 of 25 strings; only 52% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_install.pod (33 of 50 strings; only 66% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installchangelogs.pod (24 of 33 strings; only 72.72% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installdeb.pod (25 of 63 strings; only 39.68% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.32" dh_installsystemd dh_installsystemd.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installdebconf.pod (27 of 53 strings; only 50.94% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installdirs.pod (19 of 28 strings; only 67.85% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installdocs.pod (39 of 62 strings; only 62.9% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installexamples.pod (22 of 34 strings; only 64.7% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installinit.pod (44 of 65 strings; only 67.69% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.32" dh_installsystemduser dh_installsystemduser.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installinitramfs.pod (11 of 21 strings; only 52.38% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_installman.pod (28 of 38 strings; only 73.68% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installsysusers dh_installsysusers.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_link.pod (28 of 36 strings; only 77.77% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installtmpfiles dh_installtmpfiles.1 Discard man/ja/dh_makeshlibs.pod (32 of 61 strings; only 52.45% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installudev dh_installudev.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_testroot.pod (12 of 21 strings; only 57.14% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_systemd_enable.pod (17 of 37 strings; only 45.94% translated; need 80%). pod2man --utf8 -c Debhelper -r "13.32" dh_installwm dh_installwm.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! Discard man/ja/dh_systemd_start.pod (18 of 25 strings; only 72% translated; need 80%). po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_installxfonts dh_installxfonts.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_link dh_link.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_lintian dh_lintian.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_listpackages dh_listpackages.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_makeshlibs dh_makeshlibs.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_md5sums dh_md5sums.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_missing dh_missing.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_movefiles dh_movefiles.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_movetousr dh_movetousr.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_perl dh_perl.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_prep dh_prep.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! pod2man --utf8 -c Debhelper -r "13.32" dh_shlibdeps dh_shlibdeps.1 po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! po4a::pod: A new SimplePod parser is now available. Please consider using it instead of the current Pod module. If you encounter any bugs, your reports would be greatly appreciated. To use it, add the following line at the top of your po4a configuration file: "[po4a_alias:Pod] SimplePod". You can disable this message by setting the no-warn-simple option. Sorry for the noise, and thank you! touch po4a-stamp pod2man --utf8 -c Debhelper -r "13.32" dh_strip dh_strip.1 pod2man --utf8 -c Debhelper -r "13.32" dh_systemd_enable dh_systemd_enable.1 pod2man --utf8 -c Debhelper -r "13.32" dh_systemd_start dh_systemd_start.1 pod2man --utf8 -c Debhelper -r "13.32" dh_testdir dh_testdir.1 pod2man --utf8 -c Debhelper -r "13.32" dh_testroot dh_testroot.1 pod2man --utf8 -c Debhelper -r "13.32" dh_ucf dh_ucf.1 pod2man --utf8 -c Debhelper -r "13.32" dh_update_autotools_config dh_update_autotools_config.1 pod2man --utf8 -c Debhelper -r "13.32" dh_usrlocal dh_usrlocal.1 pod2man --utf8 -c Debhelper -r "13.32" dh dh.1 set -e; \ lang=de ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "13.32" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{13.32}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi set -e; \ lang=es ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "13.32" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{13.32}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-es-stamp set -e; \ lang=fr ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "13.32" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{13.32}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-de-stamp set -e; \ lang=ja ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "13.32" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{13.32}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-ja-stamp set -e; \ lang=pt ; \ dir=man/$lang; \ for file in $dir/dh*.pod; do \ prog=`basename $file | sed 's/.pod//'`; \ pod2man --utf8 -c Debhelper -r "13.32" $file $prog.$lang.1; \ done; \ if [ -e $dir/debhelper.pod ]; then \ cat $dir/debhelper.pod | \ perl -e ' undef $/; foreach (@ARGV) { open (IN, $_) or die "$_: $!"; $file=; close IN; if ($file=~m/=head1 .*?\n\n(.*?) - (.*?)\n\n/s) { my $item="=item $1(1)\n\n$2\n\n"; if (" dh_installmanpages " !~ / $1 /) { $list.=$item; } else { $list_deprecated.=$item; } } } END { my $recommended_compat = q{13.32}; $recommended_compat =~ s{^\d+\K(?:\D.*|\..*)?}{}; while () { s/#LIST#/$list/g; s/#LIST_DEPRECATED#/$list_deprecated/g; s/#RECOMMENDED_COMPAT#/$recommended_compat/g; print; }; }' `find $dir -type f -maxdepth 1 -name "dh_*.pod" | LC_ALL=C sort` | \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 > debhelper.$lang.7; \ fi; \ if [ -e $dir/debhelper-compat-upgrade-checklist.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 $dir/debhelper-compat-upgrade-checklist.pod > debhelper-compat-upgrade-checklist.$lang.7; \ fi ; \ if [ -e $dir/debhelper-obsolete-compat.pod ]; then \ pod2man --utf8 -c Debhelper -r "13.32" --name="debhelper" --section=7 $dir/debhelper-obsolete-compat.pod > debhelper-obsolete-compat.$lang.7; \ fi touch translated-fr-stamp touch translated-pt-stamp make[1]: Leaving directory '/build/debhelper-xxgOmT/debhelper-13.32' dh_auto_test make -j2 test make[1]: Entering directory '/build/debhelper-xxgOmT/debhelper-13.32' printf "package Debian::Debhelper::Dh_Version;\n\$version='13.32';\n1" > \ lib/Debian/Debhelper/Dh_Version.pm MAKEFLAGS= prove -lrj2 --timer t [16:02:02] t/Dh_Lib/control-parsing.t ........................... ok 94 ms ( 0.00 usr 0.00 sys + 0.06 cusr 0.02 csys = 0.08 CPU) [16:02:02] t/Dh_Lib/00-use.t .................................... ok 147 ms ( 0.00 usr 0.01 sys + 0.18 cusr 0.06 csys = 0.25 CPU) [16:02:02] t/Dh_Lib/path.t ...................................... ok 140 ms ( 0.01 usr 0.00 sys + 0.23 cusr 0.06 csys = 0.30 CPU) [16:02:02] t/buildsystems/01-build-system-basic-api.t ........... ok 188 ms ( 0.00 usr 0.00 sys + 0.27 cusr 0.05 csys = 0.32 CPU) [16:02:02] t/buildsystems/02-make-jobserver-makeflags.t ......... ok 165 ms ( 0.00 usr 0.00 sys + 0.29 cusr 0.06 csys = 0.35 CPU) [16:02:02] t/buildsystems/03-bs-auto-buildable.t ................ ok 194 ms ( 0.02 usr 0.00 sys + 0.30 cusr 0.05 csys = 0.37 CPU) [16:02:03] t/buildsystems/05-load-build-system.t ................ ok 242 ms ( 0.00 usr 0.01 sys + 0.21 cusr 0.04 csys = 0.26 CPU) [16:02:03] t/buildsystems/06-buildsystem-mkdir-rmdir.t .......... ok 99 ms ( 0.00 usr 0.00 sys + 0.07 cusr 0.02 csys = 0.09 CPU) [16:02:03] t/buildsystems/04-dh_auto_do_autoconf.t .............. ok 743 ms ( 0.03 usr 0.01 sys + 1.04 cusr 0.21 csys = 1.29 CPU) [16:02:03] t/debhelper-compat/syntax.t .......................... ok 146 ms ( 0.02 usr 0.00 sys + 0.09 cusr 0.06 csys = 0.17 CPU) [16:02:03] t/dh-lib.t ........................................... ok 174 ms ( 0.01 usr 0.00 sys + 0.12 cusr 0.05 csys = 0.18 CPU) [16:02:03] t/dh-sequencer.t ..................................... ok 72 ms ( 0.01 usr 0.00 sys + 0.06 cusr 0.02 csys = 0.09 CPU) [16:02:06] t/dh_compress.t ...................................... ok 2199 ms ( 0.01 usr 0.00 sys + 1.69 cusr 0.50 csys = 2.20 CPU) [16:02:07] t/dh_gencontrol/01-dbgsym-m-a-same.t ................. ok 1735 ms ( 0.01 usr 0.00 sys + 1.33 cusr 0.38 csys = 1.72 CPU) [16:02:08] t/dh_install/01-basics.t ............................. ok 798 ms ( 0.01 usr 0.00 sys + 0.63 cusr 0.17 csys = 0.81 CPU) [16:02:10] t/buildsystems/buildsystem_tests.t ................... ok 6901 ms ( 0.08 usr 0.00 sys + 5.50 cusr 1.50 csys = 7.08 CPU) [16:02:10] t/dh_install/02-bugs-53XXXX.t ........................ ok 1648 ms ( 0.01 usr 0.00 sys + 2.23 cusr 0.59 csys = 2.83 CPU) [16:02:10] t/dh_install/03-866570-dont-install-from-host.t ...... ok 460 ms ( 0.01 usr 0.00 sys + 1.61 cusr 0.47 csys = 2.09 CPU) [16:02:11] t/dh_install/04-sourcedir.t .......................... ok 1348 ms ( 0.02 usr 0.00 sys + 1.44 cusr 0.32 csys = 1.78 CPU) [16:02:12] t/dh_installdocs/01-868204-ignore-broken-symlinks.t .. ok 431 ms ( 0.01 usr 0.00 sys + 0.34 cusr 0.09 csys = 0.44 CPU) [16:02:14] t/dh_installdocs/dh_installdocs.t .................... ok 2337 ms ( 0.03 usr 0.00 sys + 1.80 cusr 0.47 csys = 2.30 CPU) [16:02:15] t/dh_installgsettings/dh_installgsettings.t .......... ok 809 ms ( 0.01 usr 0.00 sys + 0.65 cusr 0.14 csys = 0.80 CPU) [16:02:16] t/dh_installchangelogs/dh_installchangelogs.t ........ ok 6274 ms ( 0.07 usr 0.01 sys + 8.75 cusr 2.26 csys = 11.09 CPU) [16:02:16] t/dh_installman/01-basics.t .......................... skipped: Test requires man or man-recode [16:02:17] t/dh_installinit/dh_installinit.t .................... ok 1822 ms ( 0.02 usr 0.01 sys + 6.38 cusr 1.67 csys = 8.08 CPU) [16:02:17] t/dh_installpam/dh_installpam.t ...................... ok 765 ms ( 0.00 usr 0.00 sys + 2.01 cusr 0.50 csys = 2.51 CPU) [16:02:18] t/dh_installsystemd/dh_installsystemd_tmpfiles.t ..... ok 955 ms ( 0.00 usr 0.01 sys + 0.76 cusr 0.18 csys = 0.95 CPU) [16:02:19] t/dh_installsystemd/dh_systemd.t ..................... ok 1197 ms ( 0.01 usr 0.00 sys + 0.94 cusr 0.25 csys = 1.20 CPU) [16:02:22] t/dh_installsystemduser/dh_installsystemduser.t ...... ok 2409 ms ( 0.03 usr 0.01 sys + 1.87 cusr 0.40 csys = 2.31 CPU) [16:02:24] t/dh_link/01-basic.t ................................. ok 2246 ms ( 0.03 usr 0.00 sys + 1.82 cusr 0.40 csys = 2.25 CPU) [16:02:26] t/dh_link/02-346405.t ................................ ok 1491 ms ( 0.01 usr 0.01 sys + 1.23 cusr 0.24 csys = 1.49 CPU) [16:02:26] t/dh_link/03-894229.t ................................ ok 114 ms ( 0.01 usr 0.00 sys + 0.10 cusr 0.01 csys = 0.12 CPU) [16:02:27] t/dh_missing/01-no-missing.t ......................... ok 1421 ms ( 0.02 usr 0.00 sys + 1.12 cusr 0.25 csys = 1.39 CPU) [16:02:29] t/dh_missing/02-fail-on-missing.t .................... ok 1394 ms ( 0.01 usr 0.00 sys + 1.13 cusr 0.23 csys = 1.37 CPU) [16:02:29] t/dh_missing/03-dh_install-redirection.t ............. ok 638 ms ( 0.00 usr 0.00 sys + 0.49 cusr 0.12 csys = 0.61 CPU) [16:02:30] t/dh_missing/04-not-installed-glob.t ................. ok 925 ms ( 0.01 usr 0.01 sys + 0.75 cusr 0.15 csys = 0.92 CPU) [16:02:32] t/dh_movetousr/dh_movetousr.t ........................ ok 1828 ms ( 0.02 usr 0.00 sys + 1.39 cusr 0.37 csys = 1.78 CPU) [16:02:33] t/dh_installsystemd/dh_installsystemd.t .............. ok 16700 ms ( 0.22 usr 0.05 sys + 25.04 cusr 6.36 csys = 31.67 CPU) [16:02:34] t/dh_usrlocal/01-basic.t ............................. ok 2346 ms ( 0.02 usr 0.01 sys + 14.61 cusr 4.03 csys = 18.67 CPU) [16:02:34] t/override_target.t .................................. ok 132 ms ( 0.00 usr 0.00 sys + 0.09 cusr 0.03 csys = 0.12 CPU) [16:02:34] t/pod.t .............................................. skipped: Test::Pod required [16:02:35] t/size.t ............................................. ok 70 ms ( 0.01 usr 0.00 sys + 0.05 cusr 0.01 csys = 0.07 CPU) [16:02:35] t/maintscript.t ...................................... ok 1744 ms ( 0.03 usr 0.01 sys + 3.31 cusr 0.80 csys = 4.15 CPU) [16:02:35] t/syntax/syntax-libs.t ............................... ok 882 ms ( 0.00 usr 0.01 sys + 2.10 cusr 0.48 csys = 2.59 CPU) [16:02:37] t/syntax/syntax-progs.t .............................. ok 2155 ms ( 0.01 usr 0.00 sys + 2.52 cusr 0.50 csys = 3.03 CPU) [16:02:37] All tests successful. Files=45, Tests=688, 35 wallclock secs ( 0.49 usr 0.09 sys + 49.25 cusr 12.47 csys = 62.30 CPU) Result: PASS make[1]: Leaving directory '/build/debhelper-xxgOmT/debhelper-13.32' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j2 install DESTDIR=/build/debhelper-xxgOmT/debhelper-13.32/debian/tmp AM_UPDATE_INFO_DIR=no INSTALL="install --strip-program=true" make[1]: Entering directory '/build/debhelper-xxgOmT/debhelper-13.32' install -d /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/bin \ /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/share/debhelper/autoscripts \ /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/share/perl5/Debian/Debhelper/Sequence \ /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/share/perl5/Debian/Debhelper/Buildsystem \ /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/share/perl5/Debian/Debhelper/DH install dh dh_assistant dh_auto_build dh_auto_clean dh_auto_configure dh_auto_install dh_auto_test dh_bugfiles dh_builddeb dh_clean dh_compress dh_computeautosubstvars dh_dwz dh_fixperms dh_gencontrol dh_icons dh_install dh_installalternatives dh_installcatalogs dh_installchangelogs dh_installcron dh_installdeb dh_installdebconf dh_installdirs dh_installdocs dh_installemacsen dh_installexamples dh_installgsettings dh_installifupdown dh_installinfo dh_installinit dh_installinitramfs dh_installlogcheck dh_installlogrotate dh_installman dh_installmanpages dh_installmenu dh_installmime dh_installmodules dh_installpam dh_installppp dh_installsystemd dh_installsystemduser dh_installsysusers dh_installtmpfiles dh_installudev dh_installwm dh_installxfonts dh_link dh_lintian dh_listpackages dh_makeshlibs dh_md5sums dh_missing dh_movefiles dh_movetousr dh_perl dh_prep dh_shlibdeps dh_strip dh_systemd_enable dh_systemd_start dh_testdir dh_testroot dh_ucf dh_update_autotools_config dh_usrlocal /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/bin install -m 0644 autoscripts/* /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/share/debhelper/autoscripts install -m 0644 lib/Debian/Debhelper/*.pm /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/share/perl5/Debian/Debhelper [ "/usr" = /usr ] || \ sed -i '/$prefix=/s@/usr@/usr@g' /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/share/perl5/Debian/Debhelper/Dh_Lib.pm if [ "13.32" ]; then \ MV=$(echo "13.32" | perl -ne 'print $1 if /^(\d+)[~.]/;') ; \ sed -i "/constant HIGHEST_STABLE_COMPAT_LEVEL =>/s@=>.*;@=> ${MV};@g" /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/share/perl5/Debian/Debhelper/Dh_Lib.pm ; \ fi install -m 0644 lib/Debian/Debhelper/Sequence/*.pm /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/share/perl5/Debian/Debhelper/Sequence install -m 0644 lib/Debian/Debhelper/Buildsystem/*.pm /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/share/perl5/Debian/Debhelper/Buildsystem install -m 0644 lib/Debian/Debhelper/DH/*.pm /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp/usr/share/perl5/Debian/Debhelper/DH make[1]: Leaving directory '/build/debhelper-xxgOmT/debhelper-13.32' chmod -R u\+rwX /build/debhelper-xxgOmT/debhelper-13.32/debian/tmp debian/rules execute_before_dh_install make[1]: Entering directory '/build/debhelper-xxgOmT/debhelper-13.32' PERLLIBDIR=$(perl -MConfig -e 'print $Config{vendorlib}')/ ; \ perl -I"debian/tmp/${PERLLIBDIR}" debian/gen-provides > debian/debhelper.substvars make[1]: Leaving directory '/build/debhelper-xxgOmT/debhelper-13.32' dh_install dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_installman: warning: man is not available. Skipping re-encode of UTF-8 manpages dh_perl dh_link dh_missing dh_fixperms dh_compress dh_installdeb dh_computeautosubstvars dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdebhelper-perl' in '../libdebhelper-perl_13.32_all.deb'. dpkg-deb: building package 'debhelper' in '../debhelper_13.32_all.deb'. dpkg-genbuildinfo -O../debhelper_13.32_amd64.buildinfo dpkg-genchanges -O../debhelper_13.32_amd64.changes dpkg-genchanges: info: including full source code in upload dpkg-source --after-build . dpkg-buildpackage: info: full upload; Debian-native package (full source is included) -------------------------------------------------------------------------------- Build finished at 2026-06-07T16:02:39Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes Sun, 07 Jun 2026 16:02:39 +0000 | +------------------------------------------------------------------------------+ debhelper_13.32_amd64.changes: ------------------------------ Format: 1.8 Date: Sun, 07 Jun 2026 11:44:59 +0000 Source: debhelper Binary: debhelper libdebhelper-perl Architecture: source all Version: 13.32 Distribution: perl-5.42-throwaway Urgency: medium Maintainer: Debhelper Maintainers Changed-By: Niels Thykier Description: debhelper - helper programs for debian/rules libdebhelper-perl - debhelper perl modules Closes: 1072698 1132737 1133692 1134898 1136120 1138620 Changes: debhelper (13.32) unstable; urgency=medium . [ Johannes Schauer Marin Rodrigues ] * autoscripts: enable update-rc.d and deb-systemd-helper with $DPKG_ROOT * autoscripts/postrm-systemd{,-user}: stop testing for deb-systemd-helper * autoscripts/postinst-systemd-restart: do not do a daemon-reload when DPKG_ROOT is non-empty. Thanks to Helmut Grohne * dh_installtmpfiles: reproducible tmpfiles order for postrm scripts . [ Miao Wang ] * filedoublearray: do not resolve symlink when converting to absolute paths . [ Niels Thykier ] * dh_clean: remove obsolete `compat` check * dh_installtmpfiles: Remove note that `tmpfiles.d` is for `systemd`-only (Closes: 1134898) * dh_installdocs: Remove mention of where doc-base files are installed. Thanks to Jay Burstin (Closes: #1138620) * Dh_Lib.pm: Fix a (consistent) typo in a var name and fix some state resetting * upgrade-checklist: Avoid implying `X-DH-Compat` is the new default. (Closes: #1072698) . [ Dorle Osterode ] * Fix doubling of word in man page * Fix meaning of "ahead of time" . [ Nilesh Patra ] * Fix header for `dh_computeautosubstvars` * dh_computeautosubstvars: process next package instead of returning in parallel build * Do not compute `Commands` for `udeb` (Closes: #1136120) . [ Charles Plessy ] * Do not compress R data files. . [ Helmut Grohne ] * autoconf: export standard build tools * Add function get_build_tools to Dh_Lib. . [ Américo Monteiro ] * Update on Portuguese translation of the man pages (Closes: #1132737) . [ Luca Boccassi ] * dh_installsystemd: Remove note that `tmpfiles.d` is for `systemd`-only * dh_installtmpfiles: add dependency on tmpfiles implementation . [ Sandro Knauß ] * Document dh_qmldeps changes with v14. (Closes: #1133692) Checksums-Sha1: 96f1bf5a06e823944aa8ff341f6676aeb90ca16d 900 debhelper_13.32.dsc 30436a5342b603b76d0bc3b82bc5bd352e21cc44 641784 debhelper_13.32.tar.xz 1cc064ae197716281bfc9cf5c1874239d18f5518 942084 debhelper_13.32_all.deb 23316ea0f7394442d13e67b877890130bf510cb3 4702 debhelper_13.32_amd64.buildinfo a79c7479dfd5d98000ae936d7150fdfad23ac8b5 76840 libdebhelper-perl_13.32_all.deb Checksums-Sha256: ab676a8ce1efa287c19b2d6eb7573f519f05b04eeb908133ef5964a8d70586ff 900 debhelper_13.32.dsc cbd175c440499ded40ed4c6ba83e13f73f6f3fbeaa0ac60e1e525b624063b099 641784 debhelper_13.32.tar.xz fb726720b40ead6d4482c8de9c0a7578b6956cf30e51e281080b88c12572796f 942084 debhelper_13.32_all.deb ec2932a215a0b98083a852ae528a619e68d06e8c2e17af18218d6a560fd5dbe1 4702 debhelper_13.32_amd64.buildinfo d383e478b0b63c45a9a1f0440097534e1346e7fac13ba272ebb4bed7b6eaf976 76840 libdebhelper-perl_13.32_all.deb Files: 864f3b2d86b13d41117487c42e3202ea 900 devel optional debhelper_13.32.dsc d35771ee0f8c1ccb439e243e4a7decfe 641784 devel optional debhelper_13.32.tar.xz ee5ffb1b24caef373cae324a3248986f 942084 devel optional debhelper_13.32_all.deb f6f3af382ae72110219bd8b606992b75 4702 devel optional debhelper_13.32_amd64.buildinfo 7804fd10415710493977a0faf7581929 76840 perl optional libdebhelper-perl_13.32_all.deb +------------------------------------------------------------------------------+ | Buildinfo Sun, 07 Jun 2026 16:02:39 +0000 | +------------------------------------------------------------------------------+ Format: 1.0 Source: debhelper Binary: debhelper libdebhelper-perl Architecture: all source Version: 13.32 Checksums-Md5: 864f3b2d86b13d41117487c42e3202ea 900 debhelper_13.32.dsc ee5ffb1b24caef373cae324a3248986f 942084 debhelper_13.32_all.deb 7804fd10415710493977a0faf7581929 76840 libdebhelper-perl_13.32_all.deb Checksums-Sha1: 96f1bf5a06e823944aa8ff341f6676aeb90ca16d 900 debhelper_13.32.dsc 1cc064ae197716281bfc9cf5c1874239d18f5518 942084 debhelper_13.32_all.deb a79c7479dfd5d98000ae936d7150fdfad23ac8b5 76840 libdebhelper-perl_13.32_all.deb Checksums-Sha256: ab676a8ce1efa287c19b2d6eb7573f519f05b04eeb908133ef5964a8d70586ff 900 debhelper_13.32.dsc fb726720b40ead6d4482c8de9c0a7578b6956cf30e51e281080b88c12572796f 942084 debhelper_13.32_all.deb d383e478b0b63c45a9a1f0440097534e1346e7fac13ba272ebb4bed7b6eaf976 76840 libdebhelper-perl_13.32_all.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Sun, 07 Jun 2026 16:02:39 +0000 Build-Path: /build/debhelper-xxgOmT/debhelper-13.32 Build-Tainted-By: usr-local-has-programs Installed-Build-Depends: base-files (= 14.2), base-passwd (= 3.6.8), bash (= 5.3-3), binutils (= 2.46-3), binutils-common (= 2.46-3), binutils-x86-64-linux-gnu (= 2.46-3), build-essential (= 12.12), bzip2 (= 1.0.8-6+b2), coreutils (= 9.10-1), cpp (= 4:15.2.0-5+b1), cpp-15 (= 15.2.0-17), cpp-15-x86-64-linux-gnu (= 15.2.0-17), cpp-x86-64-linux-gnu (= 4:15.2.0-5+b1), dash (= 0.5.12-12), debconf (= 1.5.92), debianutils (= 5.23.2), diffutils (= 1:3.12-1), dpkg (= 1.23.7), dpkg-dev (= 1.23.7), findutils (= 4.10.0-4), g++ (= 4:15.2.0-5+b1), g++-15 (= 15.2.0-17), g++-15-x86-64-linux-gnu (= 15.2.0-17), g++-x86-64-linux-gnu (= 4:15.2.0-5+b1), gcc (= 4:15.2.0-5+b1), gcc-15 (= 15.2.0-17), gcc-15-base (= 15.2.0-17), gcc-15-x86-64-linux-gnu (= 15.2.0-17), gcc-16-base (= 16.1.0-1), gcc-x86-64-linux-gnu (= 4:15.2.0-5+b1), gettext (= 0.26-1), gettext-base (= 0.26-1), grep (= 3.12-1), gzip (= 1.13-1), hostname (= 3.25), init-system-helpers (= 1.69), libacl1 (= 2.3.2-3), libasan8 (= 16.1.0-1), libatomic1 (= 16.1.0-1), libattr1 (= 1:2.5.2-4), libaudit-common (= 1:4.1.2-1), libaudit1 (= 1:4.1.2-1+b1), libbinutils (= 2.46-3), libblkid1 (= 2.42.1-2), libbz2-1.0 (= 1.0.8-6+b2), libc-bin (= 2.42-16), libc-dev-bin (= 2.42-16), libc-gconv-modules-extra (= 2.42-16), libc6 (= 2.42-16), libc6-dev (= 2.42-16), libcap-ng0 (= 0.9.3-1), libcc1-0 (= 16.1.0-1), libclass-inspector-perl (= 1.36-3), libcrypt1 (= 1:4.5.1-1+b1), libctf-nobfd0 (= 2.46-3), libctf0 (= 2.46-3), libdb5.3t64 (= 5.3.28+dfsg2-11+b1), libdebconfclient0 (= 0.283), libdpkg-perl (= 1.23.7), libfile-sharedir-perl (= 1.118-3), libgcc-15-dev (= 15.2.0-17), libgcc-s1 (= 16.1.0-1), libgdbm-compat4t64 (= 1.26-1+b2), libgdbm6t64 (= 1.26-1+b2), libgmp10 (= 2:6.3.0+dfsg-5+b2), libgomp1 (= 16.1.0-1), libgprofng0 (= 2.46-3), libhwasan0 (= 16.1.0-1), libisl23 (= 0.27-2), libitm1 (= 16.1.0-1), libjansson4 (= 2.14-2+b4), liblsan0 (= 16.1.0-1), liblzma5 (= 5.8.3-1), libmd0 (= 1.2.0-2), libmount1 (= 2.42.1-2), libmpc3 (= 1.3.1-3), libmpfr6 (= 4.2.2-3), libosp5 (= 1.5.2-15.2), libpam-modules (= 1.7.0-5+b2), libpam-modules-bin (= 1.7.0-5+b2), libpam-runtime (= 1.7.0-5), libpam0g (= 1.7.0-5+b2), libpcre2-8-0 (= 10.46-1+b2), libperl5.42 (= 5.42.2-2), libpod-parser-perl (= 1.67-1), libquadmath0 (= 16.1.0-1), libselinux1 (= 3.10-1), libsframe3 (= 2.46-3), libsgmls-perl (= 1.03ii-38), libsmartcols1 (= 2.42.1-2), libssl3t64 (= 3.6.2-1), libstdc++-15-dev (= 15.2.0-17), libstdc++6 (= 16.1.0-1), libsyntax-keyword-try-perl (= 0.31-1+b1), libsystemd0 (= 261~rc3-1), libtinfo6 (= 6.6+20251231-1+b1), libtsan2 (= 16.1.0-1), libubsan1 (= 16.1.0-1), libudev1 (= 261~rc3-1), libunistring5 (= 1.4.2-1), libuuid1 (= 2.42.1-2), libxml2-16 (= 2.15.3+dfsg-1), libxs-parse-keyword-perl (= 0.49-1+b1), libyaml-tiny-perl (= 1.76-1), libzstd1 (= 1.5.7+dfsg-3+b2), linux-libc-dev (= 7.0.10-1), make (= 4.4.1-3), mawk (= 1.3.4.20260302-1), ncurses-base (= 6.6+20251231-1), ncurses-bin (= 6.6+20251231-1+b1), opensp (= 1.5.2-15.2), openssl-provider-legacy (= 3.6.2-1), patch (= 2.8-2), perl (= 5.42.2-2), perl-base (= 5.42.2-2), perl-modules-5.42 (= 5.42.2-2), po4a (= 0.74-1), rpcsvc-proto (= 1.4.4-1), sed (= 4.9-3), sgml-base (= 1.31+nmu1), sysvinit-utils (= 3.18-1), tar (= 1.35+dfsg-4), util-linux (= 2.42.1-2), xz-utils (= 5.8.3-1), zlib1g (= 1:1.3.dfsg+really1.3.2-3) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LANGUAGE="en_GB:en" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" LD_PRELOAD="libeatmydata.so" SOURCE_DATE_EPOCH="1780832699" +------------------------------------------------------------------------------+ | Package contents Sun, 07 Jun 2026 16:02:39 +0000 | +------------------------------------------------------------------------------+ debhelper_13.32_all.deb ----------------------- new Debian package, version 2.0. size 942084 bytes: control archive=9732 bytes. 2373 bytes, 22 lines control 28297 bytes, 394 lines md5sums Package: debhelper Version: 13.32 Architecture: all Maintainer: Debhelper Maintainers Installed-Size: 1523 Depends: dh-autoreconf (>= 17~), dh-strip-nondeterminism (>= 0.028~), dpkg-dev (>= 1.18.2~), autotools-dev, dpkg (>= 1.18.0~), dwz (>= 0.12.20190711), file (>= 3.23), libdebhelper-perl (= 13.32), libdpkg-perl (>= 1.17.14), man-db, po-debconf, perl:any Suggests: dh-make Conflicts: dh-buildinfo Breaks: cmake (<< 3.9~), dh-debputy (<< 0.1.36~), meson (<< 0.40.0~) Replaces: dh-buildinfo Provides: debhelper-compat (= 9), debhelper-compat (= 10), debhelper-compat (= 11), debhelper-compat (= 12), debhelper-compat (= 13), dh-sequence-dwz, dh-sequence-elf-tools, dh-sequence-installinitramfs, dh-sequence-installsysusers, dh-sequence-movetousr, dh-sequence-single-binary, dh-sequence-systemd Section: devel Priority: optional Multi-Arch: foreign Description: helper programs for debian/rules A collection of programs that can be used in a debian/rules file to automate common tasks related to building Debian packages. Programs are included to install various files into your package, compress files, fix file permissions, integrate your package with the Debian menu system, debconf, doc-base, etc. Most Debian packages use debhelper as part of their build process. Commands: dh, dh_assistant, dh_auto_build, dh_auto_clean, dh_auto_configure, dh_auto_install, dh_auto_test, dh_bugfiles, dh_builddeb, dh_clean, dh_compress, dh_computeautosubstvars, dh_dwz, dh_fixperms, dh_gencontrol, dh_icons, dh_install, dh_installalternatives, dh_installcatalogs, dh_installchangelogs, dh_installcron, dh_installdeb, dh_installdebconf, dh_installdirs, dh_installdocs, dh_installemacsen, dh_installexamples, dh_installgsettings, dh_installifupdown, dh_installinfo, dh_installinit, dh_installinitramfs, dh_installlogcheck, dh_installlogrotate, dh_installman, dh_installmanpages, dh_installmenu, dh_installmime, dh_installmodules, dh_installpam, dh_installppp, dh_installsystemd, dh_installsystemduser, dh_installsysusers, dh_installtmpfiles, dh_installudev, dh_installwm, dh_installxfonts, dh_link, dh_lintian, dh_listpackages, dh_makeshlibs, dh_md5sums, dh_missing, dh_movefiles, dh_movetousr, dh_perl, dh_prep, dh_shlibdeps, dh_strip, dh_systemd_enable, dh_systemd_start, dh_testdir, dh_testroot, dh_ucf, dh_update_autotools_config, dh_usrlocal drwxr-xr-x root/root 0 2026-06-07 11:44 ./ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/bin/ -rwxr-xr-x root/root 30773 2026-06-07 11:44 ./usr/bin/dh -rwxr-xr-x root/root 125049 2026-06-07 11:44 ./usr/bin/dh_assistant -rwxr-xr-x root/root 1443 2026-06-07 11:44 ./usr/bin/dh_auto_build -rwxr-xr-x root/root 1585 2026-06-07 11:44 ./usr/bin/dh_auto_clean -rwxr-xr-x root/root 1703 2026-06-07 11:44 ./usr/bin/dh_auto_configure -rwxr-xr-x root/root 3333 2026-06-07 11:44 ./usr/bin/dh_auto_install -rwxr-xr-x root/root 1730 2026-06-07 11:44 ./usr/bin/dh_auto_test -rwxr-xr-x root/root 3787 2026-06-07 11:44 ./usr/bin/dh_bugfiles -rwxr-xr-x root/root 4944 2026-06-07 11:44 ./usr/bin/dh_builddeb -rwxr-xr-x root/root 5692 2026-06-07 11:44 ./usr/bin/dh_clean -rwxr-xr-x root/root 8092 2026-06-07 11:44 ./usr/bin/dh_compress -rwxr-xr-x root/root 1625 2026-06-07 11:44 ./usr/bin/dh_computeautosubstvars -rwxr-xr-x root/root 5421 2026-06-07 11:44 ./usr/bin/dh_dwz -rwxr-xr-x root/root 5491 2026-06-07 11:44 ./usr/bin/dh_fixperms -rwxr-xr-x root/root 7366 2026-06-07 11:44 ./usr/bin/dh_gencontrol -rwxr-xr-x root/root 2129 2026-06-07 11:44 ./usr/bin/dh_icons -rwxr-xr-x root/root 12946 2026-06-07 11:44 ./usr/bin/dh_install -rwxr-xr-x root/root 7051 2026-06-07 11:44 ./usr/bin/dh_installalternatives -rwxr-xr-x root/root 3523 2026-06-07 11:44 ./usr/bin/dh_installcatalogs -rwxr-xr-x root/root 13045 2026-06-07 11:44 ./usr/bin/dh_installchangelogs -rwxr-xr-x root/root 1807 2026-06-07 11:44 ./usr/bin/dh_installcron -rwxr-xr-x root/root 13712 2026-06-07 11:44 ./usr/bin/dh_installdeb -rwxr-xr-x root/root 7071 2026-06-07 11:44 ./usr/bin/dh_installdebconf -rwxr-xr-x root/root 3274 2026-06-07 11:44 ./usr/bin/dh_installdirs -rwxr-xr-x root/root 15804 2026-06-07 11:44 ./usr/bin/dh_installdocs -rwxr-xr-x root/root 4276 2026-06-07 11:44 ./usr/bin/dh_installemacsen -rwxr-xr-x root/root 6071 2026-06-07 11:44 ./usr/bin/dh_installexamples -rwxr-xr-x root/root 2404 2026-06-07 11:44 ./usr/bin/dh_installgsettings -rwxr-xr-x root/root 1618 2026-06-07 11:44 ./usr/bin/dh_installifupdown -rwxr-xr-x root/root 3572 2026-06-07 11:44 ./usr/bin/dh_installinfo -rwxr-xr-x root/root 13988 2026-06-07 11:44 ./usr/bin/dh_installinit -rwxr-xr-x root/root 2672 2026-06-07 11:44 ./usr/bin/dh_installinitramfs -rwxr-xr-x root/root 2101 2026-06-07 11:44 ./usr/bin/dh_installlogcheck -rwxr-xr-x root/root 1277 2026-06-07 11:44 ./usr/bin/dh_installlogrotate -rwxr-xr-x root/root 13825 2026-06-07 11:44 ./usr/bin/dh_installman -rwxr-xr-x root/root 5049 2026-06-07 11:44 ./usr/bin/dh_installmanpages -rwxr-xr-x root/root 2426 2026-06-07 11:44 ./usr/bin/dh_installmenu -rwxr-xr-x root/root 1555 2026-06-07 11:44 ./usr/bin/dh_installmime -rwxr-xr-x root/root 2990 2026-06-07 11:44 ./usr/bin/dh_installmodules -rwxr-xr-x root/root 1476 2026-06-07 11:44 ./usr/bin/dh_installpam -rwxr-xr-x root/root 1430 2026-06-07 11:44 ./usr/bin/dh_installppp -rwxr-xr-x root/root 14777 2026-06-07 11:44 ./usr/bin/dh_installsystemd -rwxr-xr-x root/root 8597 2026-06-07 11:44 ./usr/bin/dh_installsystemduser -rwxr-xr-x root/root 3089 2026-06-07 11:44 ./usr/bin/dh_installsysusers -rwxr-xr-x root/root 4634 2026-06-07 11:44 ./usr/bin/dh_installtmpfiles -rwxr-xr-x root/root 2186 2026-06-07 11:44 ./usr/bin/dh_installudev -rwxr-xr-x root/root 3491 2026-06-07 11:44 ./usr/bin/dh_installwm -rwxr-xr-x root/root 2900 2026-06-07 11:44 ./usr/bin/dh_installxfonts -rwxr-xr-x root/root 4586 2026-06-07 11:44 ./usr/bin/dh_link -rwxr-xr-x root/root 1948 2026-06-07 11:44 ./usr/bin/dh_lintian -rwxr-xr-x root/root 862 2026-06-07 11:44 ./usr/bin/dh_listpackages -rwxr-xr-x root/root 17187 2026-06-07 11:44 ./usr/bin/dh_makeshlibs -rwxr-xr-x root/root 3222 2026-06-07 11:44 ./usr/bin/dh_md5sums -rwxr-xr-x root/root 9279 2026-06-07 11:44 ./usr/bin/dh_missing -rwxr-xr-x root/root 4958 2026-06-07 11:44 ./usr/bin/dh_movefiles -rwxr-xr-x root/root 7853 2026-06-07 11:44 ./usr/bin/dh_movetousr -rwxr-xr-x root/root 5191 2026-06-07 11:44 ./usr/bin/dh_perl -rwxr-xr-x root/root 1947 2026-06-07 11:44 ./usr/bin/dh_prep -rwxr-xr-x root/root 6507 2026-06-07 11:44 ./usr/bin/dh_shlibdeps -rwxr-xr-x root/root 15246 2026-06-07 11:44 ./usr/bin/dh_strip -rwxr-xr-x root/root 9522 2026-06-07 11:44 ./usr/bin/dh_systemd_enable -rwxr-xr-x root/root 9061 2026-06-07 11:44 ./usr/bin/dh_systemd_start -rwxr-xr-x root/root 1373 2026-06-07 11:44 ./usr/bin/dh_testdir -rwxr-xr-x root/root 3011 2026-06-07 11:44 ./usr/bin/dh_testroot -rwxr-xr-x root/root 2544 2026-06-07 11:44 ./usr/bin/dh_ucf -rwxr-xr-x root/root 1925 2026-06-07 11:44 ./usr/bin/dh_update_autotools_config -rwxr-xr-x root/root 4337 2026-06-07 11:44 ./usr/bin/dh_usrlocal drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/doc/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/doc/debhelper/ -rw-r--r-- root/root 11634 2026-06-07 11:44 ./usr/share/doc/debhelper/PROGRAMMING.md.gz -rw-r--r-- root/root 56 2026-06-07 11:44 ./usr/share/doc/debhelper/README -rw-r--r-- root/root 868 2026-06-07 11:44 ./usr/share/doc/debhelper/SUPPORT-POLICY -rw-r--r-- root/root 730 2026-06-07 11:44 ./usr/share/doc/debhelper/TODO -rw-r--r-- root/root 8469 2026-06-07 11:44 ./usr/share/doc/debhelper/changelog.gz -rw-r--r-- root/root 4199 2026-06-07 11:44 ./usr/share/doc/debhelper/copyright drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/doc/debhelper/examples/ -rwxr-xr-x root/root 29 2026-06-07 11:44 ./usr/share/doc/debhelper/examples/rules.tiny drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/de/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/de/man1/ -rw-r--r-- root/root 9940 2026-06-07 11:44 ./usr/share/man/de/man1/dh.1.gz -rw-r--r-- root/root 1802 2026-06-07 11:44 ./usr/share/man/de/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1886 2026-06-07 11:44 ./usr/share/man/de/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1917 2026-06-07 11:44 ./usr/share/man/de/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2454 2026-06-07 11:44 ./usr/share/man/de/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1947 2026-06-07 11:44 ./usr/share/man/de/man1/dh_auto_test.1.gz -rw-r--r-- root/root 2015 2026-06-07 11:44 ./usr/share/man/de/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1889 2026-06-07 11:44 ./usr/share/man/de/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2244 2026-06-07 11:44 ./usr/share/man/de/man1/dh_clean.1.gz -rw-r--r-- root/root 2266 2026-06-07 11:44 ./usr/share/man/de/man1/dh_compress.1.gz -rw-r--r-- root/root 2495 2026-06-07 11:44 ./usr/share/man/de/man1/dh_dwz.1.gz -rw-r--r-- root/root 1992 2026-06-07 11:44 ./usr/share/man/de/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1853 2026-06-07 11:44 ./usr/share/man/de/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1782 2026-06-07 11:44 ./usr/share/man/de/man1/dh_icons.1.gz -rw-r--r-- root/root 3797 2026-06-07 11:44 ./usr/share/man/de/man1/dh_install.1.gz -rw-r--r-- root/root 2174 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 2744 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installchangelogs.1.gz -rw-r--r-- root/root 1608 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installcron.1.gz -rw-r--r-- root/root 4379 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installdeb.1.gz -rw-r--r-- root/root 3681 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installdebconf.1.gz -rw-r--r-- root/root 2085 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installdirs.1.gz -rw-r--r-- root/root 4426 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installdocs.1.gz -rw-r--r-- root/root 2115 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 2762 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installexamples.1.gz -rw-r--r-- root/root 1654 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1967 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installinfo.1.gz -rw-r--r-- root/root 4498 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installinit.1.gz -rw-r--r-- root/root 2105 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installinitramfs.1.gz -rw-r--r-- root/root 1695 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1529 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 3435 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installman.1.gz -rw-r--r-- root/root 2170 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1694 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1462 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installmime.1.gz -rw-r--r-- root/root 1954 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1705 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installpam.1.gz -rw-r--r-- root/root 1598 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installppp.1.gz -rw-r--r-- root/root 1740 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installudev.1.gz -rw-r--r-- root/root 2124 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installwm.1.gz -rw-r--r-- root/root 1897 2026-06-07 11:44 ./usr/share/man/de/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 2643 2026-06-07 11:44 ./usr/share/man/de/man1/dh_link.1.gz -rw-r--r-- root/root 1589 2026-06-07 11:44 ./usr/share/man/de/man1/dh_lintian.1.gz -rw-r--r-- root/root 1509 2026-06-07 11:44 ./usr/share/man/de/man1/dh_listpackages.1.gz -rw-r--r-- root/root 4575 2026-06-07 11:44 ./usr/share/man/de/man1/dh_makeshlibs.1.gz -rw-r--r-- root/root 1697 2026-06-07 11:44 ./usr/share/man/de/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2352 2026-06-07 11:44 ./usr/share/man/de/man1/dh_movefiles.1.gz -rw-r--r-- root/root 2207 2026-06-07 11:44 ./usr/share/man/de/man1/dh_perl.1.gz -rw-r--r-- root/root 1730 2026-06-07 11:44 ./usr/share/man/de/man1/dh_prep.1.gz -rw-r--r-- root/root 2686 2026-06-07 11:44 ./usr/share/man/de/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 3218 2026-06-07 11:44 ./usr/share/man/de/man1/dh_strip.1.gz -rw-r--r-- root/root 2660 2026-06-07 11:44 ./usr/share/man/de/man1/dh_systemd_enable.1.gz -rw-r--r-- root/root 2373 2026-06-07 11:44 ./usr/share/man/de/man1/dh_systemd_start.1.gz -rw-r--r-- root/root 1507 2026-06-07 11:44 ./usr/share/man/de/man1/dh_testdir.1.gz -rw-r--r-- root/root 2144 2026-06-07 11:44 ./usr/share/man/de/man1/dh_testroot.1.gz -rw-r--r-- root/root 2245 2026-06-07 11:44 ./usr/share/man/de/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/de/man7/ -rw-r--r-- root/root 15372 2026-06-07 11:44 ./usr/share/man/de/man7/debhelper-compat-upgrade-checklist.7.gz -rw-r--r-- root/root 3038 2026-06-07 11:44 ./usr/share/man/de/man7/debhelper-obsolete-compat.7.gz -rw-r--r-- root/root 17744 2026-06-07 11:44 ./usr/share/man/de/man7/debhelper.7.gz drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/es/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/es/man1/ -rw-r--r-- root/root 1540 2026-06-07 11:44 ./usr/share/man/es/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1603 2026-06-07 11:44 ./usr/share/man/es/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1652 2026-06-07 11:44 ./usr/share/man/es/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2149 2026-06-07 11:44 ./usr/share/man/es/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1647 2026-06-07 11:44 ./usr/share/man/es/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1719 2026-06-07 11:44 ./usr/share/man/es/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1671 2026-06-07 11:44 ./usr/share/man/es/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2015 2026-06-07 11:44 ./usr/share/man/es/man1/dh_compress.1.gz -rw-r--r-- root/root 1715 2026-06-07 11:44 ./usr/share/man/es/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1581 2026-06-07 11:44 ./usr/share/man/es/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1488 2026-06-07 11:44 ./usr/share/man/es/man1/dh_icons.1.gz -rw-r--r-- root/root 1931 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 1418 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installcron.1.gz -rw-r--r-- root/root 1927 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 1467 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1776 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installinfo.1.gz -rw-r--r-- root/root 1491 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1335 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 1970 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1557 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1284 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installmime.1.gz -rw-r--r-- root/root 1721 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1475 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installpam.1.gz -rw-r--r-- root/root 1413 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installppp.1.gz -rw-r--r-- root/root 1544 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installudev.1.gz -rw-r--r-- root/root 1880 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installwm.1.gz -rw-r--r-- root/root 1682 2026-06-07 11:44 ./usr/share/man/es/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 1396 2026-06-07 11:44 ./usr/share/man/es/man1/dh_lintian.1.gz -rw-r--r-- root/root 1298 2026-06-07 11:44 ./usr/share/man/es/man1/dh_listpackages.1.gz -rw-r--r-- root/root 1461 2026-06-07 11:44 ./usr/share/man/es/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2035 2026-06-07 11:44 ./usr/share/man/es/man1/dh_movefiles.1.gz -rw-r--r-- root/root 1947 2026-06-07 11:44 ./usr/share/man/es/man1/dh_perl.1.gz -rw-r--r-- root/root 1508 2026-06-07 11:44 ./usr/share/man/es/man1/dh_prep.1.gz -rw-r--r-- root/root 2454 2026-06-07 11:44 ./usr/share/man/es/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 1317 2026-06-07 11:44 ./usr/share/man/es/man1/dh_testdir.1.gz -rw-r--r-- root/root 1951 2026-06-07 11:44 ./usr/share/man/es/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/es/man7/ -rw-r--r-- root/root 2811 2026-06-07 11:44 ./usr/share/man/es/man7/debhelper-obsolete-compat.7.gz drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/fr/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/fr/man1/ -rw-r--r-- root/root 9405 2026-06-07 11:44 ./usr/share/man/fr/man1/dh.1.gz -rw-r--r-- root/root 1783 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1860 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1911 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2454 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1893 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1976 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1839 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2226 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_clean.1.gz -rw-r--r-- root/root 2248 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_compress.1.gz -rw-r--r-- root/root 2467 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_dwz.1.gz -rw-r--r-- root/root 1949 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1814 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1782 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_icons.1.gz -rw-r--r-- root/root 3891 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_install.1.gz -rw-r--r-- root/root 2187 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 2744 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installchangelogs.1.gz -rw-r--r-- root/root 1627 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installcron.1.gz -rw-r--r-- root/root 4350 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installdeb.1.gz -rw-r--r-- root/root 3622 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installdebconf.1.gz -rw-r--r-- root/root 2080 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installdirs.1.gz -rw-r--r-- root/root 4290 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installdocs.1.gz -rw-r--r-- root/root 2140 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 2709 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installexamples.1.gz -rw-r--r-- root/root 1669 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1959 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installinfo.1.gz -rw-r--r-- root/root 4287 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installinit.1.gz -rw-r--r-- root/root 2142 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installinitramfs.1.gz -rw-r--r-- root/root 1713 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1537 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 3514 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installman.1.gz -rw-r--r-- root/root 2117 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1729 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1471 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installmime.1.gz -rw-r--r-- root/root 1932 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1667 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installpam.1.gz -rw-r--r-- root/root 1577 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installppp.1.gz -rw-r--r-- root/root 1758 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installudev.1.gz -rw-r--r-- root/root 2172 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installwm.1.gz -rw-r--r-- root/root 1890 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 2628 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_link.1.gz -rw-r--r-- root/root 1595 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_lintian.1.gz -rw-r--r-- root/root 1519 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_listpackages.1.gz -rw-r--r-- root/root 4403 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_makeshlibs.1.gz -rw-r--r-- root/root 1678 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2345 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_movefiles.1.gz -rw-r--r-- root/root 2159 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_perl.1.gz -rw-r--r-- root/root 1732 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_prep.1.gz -rw-r--r-- root/root 2604 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 3188 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_strip.1.gz -rw-r--r-- root/root 2633 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_systemd_enable.1.gz -rw-r--r-- root/root 2361 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_systemd_start.1.gz -rw-r--r-- root/root 1518 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_testdir.1.gz -rw-r--r-- root/root 2106 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_testroot.1.gz -rw-r--r-- root/root 2209 2026-06-07 11:44 ./usr/share/man/fr/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/fr/man7/ -rw-r--r-- root/root 14636 2026-06-07 11:44 ./usr/share/man/fr/man7/debhelper-compat-upgrade-checklist.7.gz -rw-r--r-- root/root 3011 2026-06-07 11:44 ./usr/share/man/fr/man7/debhelper-obsolete-compat.7.gz -rw-r--r-- root/root 15720 2026-06-07 11:44 ./usr/share/man/fr/man7/debhelper.7.gz drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/ja/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/ja/man1/ -rw-r--r-- root/root 1681 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1834 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1795 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2387 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1836 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1846 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1822 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2196 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_clean.1.gz -rw-r--r-- root/root 2204 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_compress.1.gz -rw-r--r-- root/root 1807 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1696 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1634 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_icons.1.gz -rw-r--r-- root/root 2105 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 1441 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installcron.1.gz -rw-r--r-- root/root 2018 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 1530 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1830 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installinfo.1.gz -rw-r--r-- root/root 1543 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1399 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 2197 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1612 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1285 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installmime.1.gz -rw-r--r-- root/root 1842 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1482 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installpam.1.gz -rw-r--r-- root/root 1494 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installppp.1.gz -rw-r--r-- root/root 1647 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installudev.1.gz -rw-r--r-- root/root 2051 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installwm.1.gz -rw-r--r-- root/root 1801 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 1483 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_lintian.1.gz -rw-r--r-- root/root 1339 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_listpackages.1.gz -rw-r--r-- root/root 1523 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2321 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_movefiles.1.gz -rw-r--r-- root/root 2210 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_perl.1.gz -rw-r--r-- root/root 1603 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_prep.1.gz -rw-r--r-- root/root 2763 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 3337 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_strip.1.gz -rw-r--r-- root/root 1432 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_testdir.1.gz -rw-r--r-- root/root 2153 2026-06-07 11:44 ./usr/share/man/ja/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/ja/man7/ -rw-r--r-- root/root 3115 2026-06-07 11:44 ./usr/share/man/ja/man7/debhelper-obsolete-compat.7.gz drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/man1/ -rw-r--r-- root/root 8236 2026-06-07 11:44 ./usr/share/man/man1/dh.1.gz -rw-r--r-- root/root 14992 2026-06-07 11:44 ./usr/share/man/man1/dh_assistant.1.gz -rw-r--r-- root/root 1416 2026-06-07 11:44 ./usr/share/man/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1474 2026-06-07 11:44 ./usr/share/man/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1528 2026-06-07 11:44 ./usr/share/man/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 1966 2026-06-07 11:44 ./usr/share/man/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1527 2026-06-07 11:44 ./usr/share/man/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1600 2026-06-07 11:44 ./usr/share/man/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1510 2026-06-07 11:44 ./usr/share/man/man1/dh_builddeb.1.gz -rw-r--r-- root/root 1777 2026-06-07 11:44 ./usr/share/man/man1/dh_clean.1.gz -rw-r--r-- root/root 1832 2026-06-07 11:44 ./usr/share/man/man1/dh_compress.1.gz -rw-r--r-- root/root 1291 2026-06-07 11:44 ./usr/share/man/man1/dh_computeautosubstvars.1.gz -rw-r--r-- root/root 2022 2026-06-07 11:44 ./usr/share/man/man1/dh_dwz.1.gz -rw-r--r-- root/root 1583 2026-06-07 11:44 ./usr/share/man/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1446 2026-06-07 11:44 ./usr/share/man/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1388 2026-06-07 11:44 ./usr/share/man/man1/dh_icons.1.gz -rw-r--r-- root/root 3197 2026-06-07 11:44 ./usr/share/man/man1/dh_install.1.gz -rw-r--r-- root/root 1562 2026-06-07 11:44 ./usr/share/man/man1/dh_installalternatives.1.gz -rw-r--r-- root/root 1771 2026-06-07 11:44 ./usr/share/man/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 2253 2026-06-07 11:44 ./usr/share/man/man1/dh_installchangelogs.1.gz -rw-r--r-- root/root 1294 2026-06-07 11:44 ./usr/share/man/man1/dh_installcron.1.gz -rw-r--r-- root/root 3723 2026-06-07 11:44 ./usr/share/man/man1/dh_installdeb.1.gz -rw-r--r-- root/root 3075 2026-06-07 11:44 ./usr/share/man/man1/dh_installdebconf.1.gz -rw-r--r-- root/root 1674 2026-06-07 11:44 ./usr/share/man/man1/dh_installdirs.1.gz -rw-r--r-- root/root 3714 2026-06-07 11:44 ./usr/share/man/man1/dh_installdocs.1.gz -rw-r--r-- root/root 1720 2026-06-07 11:44 ./usr/share/man/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 2275 2026-06-07 11:44 ./usr/share/man/man1/dh_installexamples.1.gz -rw-r--r-- root/root 1516 2026-06-07 11:44 ./usr/share/man/man1/dh_installgsettings.1.gz -rw-r--r-- root/root 1327 2026-06-07 11:44 ./usr/share/man/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1594 2026-06-07 11:44 ./usr/share/man/man1/dh_installinfo.1.gz -rw-r--r-- root/root 3815 2026-06-07 11:44 ./usr/share/man/man1/dh_installinit.1.gz -rw-r--r-- root/root 1689 2026-06-07 11:44 ./usr/share/man/man1/dh_installinitramfs.1.gz -rw-r--r-- root/root 1356 2026-06-07 11:44 ./usr/share/man/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1209 2026-06-07 11:44 ./usr/share/man/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 2892 2026-06-07 11:44 ./usr/share/man/man1/dh_installman.1.gz -rw-r--r-- root/root 1734 2026-06-07 11:44 ./usr/share/man/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1366 2026-06-07 11:44 ./usr/share/man/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1157 2026-06-07 11:44 ./usr/share/man/man1/dh_installmime.1.gz -rw-r--r-- root/root 1541 2026-06-07 11:44 ./usr/share/man/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1334 2026-06-07 11:44 ./usr/share/man/man1/dh_installpam.1.gz -rw-r--r-- root/root 1265 2026-06-07 11:44 ./usr/share/man/man1/dh_installppp.1.gz -rw-r--r-- root/root 3042 2026-06-07 11:44 ./usr/share/man/man1/dh_installsystemd.1.gz -rw-r--r-- root/root 1924 2026-06-07 11:44 ./usr/share/man/man1/dh_installsystemduser.1.gz -rw-r--r-- root/root 1438 2026-06-07 11:44 ./usr/share/man/man1/dh_installsysusers.1.gz -rw-r--r-- root/root 1684 2026-06-07 11:44 ./usr/share/man/man1/dh_installtmpfiles.1.gz -rw-r--r-- root/root 1386 2026-06-07 11:44 ./usr/share/man/man1/dh_installudev.1.gz -rw-r--r-- root/root 1707 2026-06-07 11:44 ./usr/share/man/man1/dh_installwm.1.gz -rw-r--r-- root/root 1511 2026-06-07 11:44 ./usr/share/man/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 2112 2026-06-07 11:44 ./usr/share/man/man1/dh_link.1.gz -rw-r--r-- root/root 1254 2026-06-07 11:44 ./usr/share/man/man1/dh_lintian.1.gz -rw-r--r-- root/root 1150 2026-06-07 11:44 ./usr/share/man/man1/dh_listpackages.1.gz -rw-r--r-- root/root 3800 2026-06-07 11:44 ./usr/share/man/man1/dh_makeshlibs.1.gz -rw-r--r-- root/root 1318 2026-06-07 11:44 ./usr/share/man/man1/dh_md5sums.1.gz -rw-r--r-- root/root 1961 2026-06-07 11:44 ./usr/share/man/man1/dh_missing.1.gz -rw-r--r-- root/root 1891 2026-06-07 11:44 ./usr/share/man/man1/dh_movefiles.1.gz -rw-r--r-- root/root 2215 2026-06-07 11:44 ./usr/share/man/man1/dh_movetousr.1.gz -rw-r--r-- root/root 1762 2026-06-07 11:44 ./usr/share/man/man1/dh_perl.1.gz -rw-r--r-- root/root 1355 2026-06-07 11:44 ./usr/share/man/man1/dh_prep.1.gz -rw-r--r-- root/root 2160 2026-06-07 11:44 ./usr/share/man/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 2696 2026-06-07 11:44 ./usr/share/man/man1/dh_strip.1.gz -rw-r--r-- root/root 2238 2026-06-07 11:44 ./usr/share/man/man1/dh_systemd_enable.1.gz -rw-r--r-- root/root 1951 2026-06-07 11:44 ./usr/share/man/man1/dh_systemd_start.1.gz -rw-r--r-- root/root 1184 2026-06-07 11:44 ./usr/share/man/man1/dh_testdir.1.gz -rw-r--r-- root/root 1755 2026-06-07 11:44 ./usr/share/man/man1/dh_testroot.1.gz -rw-r--r-- root/root 1681 2026-06-07 11:44 ./usr/share/man/man1/dh_ucf.1.gz -rw-r--r-- root/root 1151 2026-06-07 11:44 ./usr/share/man/man1/dh_update_autotools_config.1.gz -rw-r--r-- root/root 1838 2026-06-07 11:44 ./usr/share/man/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/man7/ -rw-r--r-- root/root 12980 2026-06-07 11:44 ./usr/share/man/man7/debhelper-compat-upgrade-checklist.7.gz -rw-r--r-- root/root 2501 2026-06-07 11:44 ./usr/share/man/man7/debhelper-obsolete-compat.7.gz -rw-r--r-- root/root 15487 2026-06-07 11:44 ./usr/share/man/man7/debhelper.7.gz drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/pt/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/pt/man1/ -rw-r--r-- root/root 8931 2026-06-07 11:44 ./usr/share/man/pt/man1/dh.1.gz -rw-r--r-- root/root 1629 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_auto_build.1.gz -rw-r--r-- root/root 1688 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_auto_clean.1.gz -rw-r--r-- root/root 1725 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_auto_configure.1.gz -rw-r--r-- root/root 2244 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_auto_install.1.gz -rw-r--r-- root/root 1719 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_auto_test.1.gz -rw-r--r-- root/root 1811 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_bugfiles.1.gz -rw-r--r-- root/root 1701 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_builddeb.1.gz -rw-r--r-- root/root 2053 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_clean.1.gz -rw-r--r-- root/root 2111 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_compress.1.gz -rw-r--r-- root/root 2253 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_dwz.1.gz -rw-r--r-- root/root 1803 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_fixperms.1.gz -rw-r--r-- root/root 1648 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_gencontrol.1.gz -rw-r--r-- root/root 1601 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_icons.1.gz -rw-r--r-- root/root 3499 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_install.1.gz -rw-r--r-- root/root 1998 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installcatalogs.1.gz -rw-r--r-- root/root 2583 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installchangelogs.1.gz -rw-r--r-- root/root 1465 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installcron.1.gz -rw-r--r-- root/root 4108 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installdeb.1.gz -rw-r--r-- root/root 3408 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installdebconf.1.gz -rw-r--r-- root/root 1892 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installdirs.1.gz -rw-r--r-- root/root 4062 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installdocs.1.gz -rw-r--r-- root/root 1943 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installemacsen.1.gz -rw-r--r-- root/root 2517 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installexamples.1.gz -rw-r--r-- root/root 1496 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installifupdown.1.gz -rw-r--r-- root/root 1797 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installinfo.1.gz -rw-r--r-- root/root 4147 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installinit.1.gz -rw-r--r-- root/root 1905 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installinitramfs.1.gz -rw-r--r-- root/root 1544 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installlogcheck.1.gz -rw-r--r-- root/root 1380 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installlogrotate.1.gz -rw-r--r-- root/root 3181 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installman.1.gz -rw-r--r-- root/root 1979 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installmanpages.1.gz -rw-r--r-- root/root 1551 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installmenu.1.gz -rw-r--r-- root/root 1327 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installmime.1.gz -rw-r--r-- root/root 1748 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installmodules.1.gz -rw-r--r-- root/root 1530 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installpam.1.gz -rw-r--r-- root/root 1447 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installppp.1.gz -rw-r--r-- root/root 1581 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installudev.1.gz -rw-r--r-- root/root 1954 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installwm.1.gz -rw-r--r-- root/root 1728 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_installxfonts.1.gz -rw-r--r-- root/root 2396 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_link.1.gz -rw-r--r-- root/root 1430 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_lintian.1.gz -rw-r--r-- root/root 1321 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_listpackages.1.gz -rw-r--r-- root/root 4162 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_makeshlibs.1.gz -rw-r--r-- root/root 1510 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_md5sums.1.gz -rw-r--r-- root/root 2093 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_movefiles.1.gz -rw-r--r-- root/root 1983 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_perl.1.gz -rw-r--r-- root/root 1557 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_prep.1.gz -rw-r--r-- root/root 2436 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_shlibdeps.1.gz -rw-r--r-- root/root 2954 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_strip.1.gz -rw-r--r-- root/root 2507 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_systemd_enable.1.gz -rw-r--r-- root/root 2211 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_systemd_start.1.gz -rw-r--r-- root/root 1350 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_testdir.1.gz -rw-r--r-- root/root 1919 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_testroot.1.gz -rw-r--r-- root/root 2029 2026-06-07 11:44 ./usr/share/man/pt/man1/dh_usrlocal.1.gz drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/man/pt/man7/ -rw-r--r-- root/root 13808 2026-06-07 11:44 ./usr/share/man/pt/man7/debhelper-compat-upgrade-checklist.7.gz -rw-r--r-- root/root 2867 2026-06-07 11:44 ./usr/share/man/pt/man7/debhelper-obsolete-compat.7.gz -rw-r--r-- root/root 15006 2026-06-07 11:44 ./usr/share/man/pt/man7/debhelper.7.gz libdebhelper-perl_13.32_all.deb ------------------------------- new Debian package, version 2.0. size 76840 bytes: control archive=2852 bytes. 537 bytes, 17 lines control 7331 bytes, 85 lines md5sums Package: libdebhelper-perl Source: debhelper Version: 13.32 Architecture: all Maintainer: Debhelper Maintainers Installed-Size: 344 Depends: perl:any Breaks: debhelper (<< 12.6~) Replaces: debhelper (<< 12.6~) Section: perl Priority: optional Multi-Arch: foreign Description: debhelper perl modules A collection of programs that can be used in a debian/rules file to automate common tasks related to building Debian packages. . This package provides the perl modules used by the scripts in debhelper. drwxr-xr-x root/root 0 2026-06-07 11:44 ./ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/debhelper/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/ -rw-r--r-- root/root 41 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/maintscript-helper -rw-r--r-- root/root 174 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-alternatives -rw-r--r-- root/root 335 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-emacsen -rw-r--r-- root/root 215 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-icons -rw-r--r-- root/root 333 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-init -rw-r--r-- root/root 238 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-init-nostart -rw-r--r-- root/root 416 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-init-restart -rw-r--r-- root/root 201 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-init-tmpfiles -rw-r--r-- root/root 135 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-menu -rw-r--r-- root/root 187 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-menu-method -rw-r--r-- root/root 231 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-modules -rw-r--r-- root/root 656 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-systemd-dont-enable -rw-r--r-- root/root 741 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-systemd-enable -rw-r--r-- root/root 397 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-systemd-restart -rw-r--r-- root/root 345 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-systemd-restartnostart -rw-r--r-- root/root 305 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-systemd-start -rw-r--r-- root/root 693 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-systemd-user-dont-enable -rw-r--r-- root/root 770 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-systemd-user-enable -rw-r--r-- root/root 634 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-systemd-user-restart -rw-r--r-- root/root 202 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-sysusers -rw-r--r-- root/root 121 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-ucf -rw-r--r-- root/root 666 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-usrlocal -rw-r--r-- root/root 310 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-wm -rw-r--r-- root/root 223 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-wm-noman -rw-r--r-- root/root 59 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postinst-xfonts -rw-r--r-- root/root 112 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-debconf -rw-r--r-- root/root 83 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-icons -rw-r--r-- root/root 213 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-init -rw-r--r-- root/root 261 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-init-tmpfiles-purge -rw-r--r-- root/root 215 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-init-tmpfiles-remove -rw-r--r-- root/root 110 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-menu -rw-r--r-- root/root 211 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-menu-method -rw-r--r-- root/root 99 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-modules -rw-r--r-- root/root 55 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-sgmlcatalog -rw-r--r-- root/root 88 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-systemd -rw-r--r-- root/root 114 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-systemd-reload-only -rw-r--r-- root/root 95 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-systemd-user -rw-r--r-- root/root 376 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-systemd-user-reload-only -rw-r--r-- root/root 254 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-ucf -rw-r--r-- root/root 59 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/postrm-xfonts -rw-r--r-- root/root 255 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/preinst-emacsen -rw-r--r-- root/root 134 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/preinst-init-chmod -rw-r--r-- root/root 153 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/preinst-init-stop -rw-r--r-- root/root 141 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/preinst-systemd-stop -rw-r--r-- root/root 66 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/prerm-alternatives -rw-r--r-- root/root 198 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/prerm-emacsen -rw-r--r-- root/root 130 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/prerm-init -rw-r--r-- root/root 152 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/prerm-init-norestart -rw-r--r-- root/root 118 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/prerm-systemd -rw-r--r-- root/root 140 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/prerm-systemd-restart -rw-r--r-- root/root 147 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/prerm-systemd-user-stop -rw-r--r-- root/root 89 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/prerm-usrlocal -rw-r--r-- root/root 84 2026-06-07 11:44 ./usr/share/debhelper/autoscripts/prerm-wm drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/debputy/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/debputy/debputy/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/debputy/debputy/plugins/ -rw-r--r-- root/root 16649 2026-06-07 11:44 ./usr/share/debputy/debputy/plugins/debhelper-documentation.json drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/doc/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/doc/libdebhelper-perl/ -rw-r--r-- root/root 8471 2026-06-07 11:44 ./usr/share/doc/libdebhelper-perl/changelog.gz -rw-r--r-- root/root 4199 2026-06-07 11:44 ./usr/share/doc/libdebhelper-perl/copyright drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/perl5/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/perl5/Debian/ drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/ -rw-r--r-- root/root 19160 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem.pm drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/ -rw-r--r-- root/root 1057 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/ant.pm -rw-r--r-- root/root 2939 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/autoconf.pm -rw-r--r-- root/root 6532 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/cmake.pm -rw-r--r-- root/root 5808 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/makefile.pm -rw-r--r-- root/root 4907 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/meson.pm -rw-r--r-- root/root 1794 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/ninja.pm -rw-r--r-- root/root 2483 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/perl_build.pm -rw-r--r-- root/root 2875 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/perl_makemaker.pm -rw-r--r-- root/root 5585 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/python_distutils.pm -rw-r--r-- root/root 2460 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/qmake.pm -rw-r--r-- root/root 306 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Buildsystem/qmake6.pm drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/DH/ -rw-r--r-- root/root 8709 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/DH/AddonAPI.pm -rw-r--r-- root/root 967 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/DH/SequenceState.pm -rw-r--r-- root/root 8972 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Dh_Buildsystems.pm -rw-r--r-- root/root 9585 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Dh_Getopt.pm -rw-r--r-- root/root 106055 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Dh_Lib.pm -rw-r--r-- root/root 58 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Dh_Version.pm -rw-r--r-- root/root 3649 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Sequence.pm drwxr-xr-x root/root 0 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Sequence/ -rw-r--r-- root/root 280 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Sequence/build_stamp.pm -rw-r--r-- root/root 290 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Sequence/dwz.pm -rw-r--r-- root/root 297 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Sequence/elf_tools.pm -rw-r--r-- root/root 330 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Sequence/installinitramfs.pm -rw-r--r-- root/root 126 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Sequence/installsysusers.pm -rw-r--r-- root/root 162 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Sequence/movetousr.pm -rw-r--r-- root/root 3000 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Sequence/root_sequence.pm -rw-r--r-- root/root 2140 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Sequence/single_binary.pm -rw-r--r-- root/root 610 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/Sequence/systemd.pm -rw-r--r-- root/root 31832 2026-06-07 11:44 ./usr/share/perl5/Debian/Debhelper/SequencerUtil.pm +------------------------------------------------------------------------------+ | Post Build Sun, 07 Jun 2026 16:02:40 +0000 | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup Sun, 07 Jun 2026 16:02:40 +0000 | +------------------------------------------------------------------------------+ Purging /build/debhelper-xxgOmT Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary Sun, 07 Jun 2026 16:02:40 +0000 | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 15580 Build-Time: 56 Distribution: perl-5.42-throwaway Host Architecture: amd64 Install-Time: 4 Job: /srv/debomatic/incoming/debhelper_13.32.dsc Machine Architecture: amd64 Package: debhelper Package-Time: 64 Source-Version: 13.32 Space: 15580 Status: successful Version: 13.32 -------------------------------------------------------------------------------- Finished at 2026-06-07T16:02:39Z Build needed 00:01:04, 15580k disk space