sbuild (Debian sbuild) 0.85.9 (29 May 2024) on carme.larted.org.uk +==============================================================================+ | libcoro-perl 6.570-3+b4 (amd64) Sun, 02 Jun 2024 14:21:29 +0000 | +==============================================================================+ Package: libcoro-perl Version: 6.570-3+b4 Source Version: 6.570-3 Distribution: perl-5.40 Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: any I: NOTICE: Log filtering will replace 'var/run/schroot/mount/perl-5.40-amd64-debomatic-873fd7d4-b2a0-4c2c-8c53-17a74c205eca' with '<>' +------------------------------------------------------------------------------+ | Chroot Setup Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libcoro-perl_6.570-3 perl-5.40 amd64 ----------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libcoro-perl_6.570-3 perl-5.40 amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: NOTICE: Log filtering will replace 'build/libcoro-perl-gOw3X4/resolver-Uf7Hz8' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.40 InRelease [3039 B] Get:1 file:/srv/reprepro perl-5.40 InRelease [3039 B] Get:2 file:/srv/reprepro perl-5.40/main amd64 Packages [520 kB] Hit:3 http://localhost:3142/debian unstable InRelease Hit:4 http://localhost:3142/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/libcoro-perl_6.570-3.dsc exists in /srv/debomatic/incoming; copying to chroot I: NOTICE: Log filtering will replace 'build/libcoro-perl-gOw3X4/libcoro-perl-6.570' with '<>' I: NOTICE: Log filtering will replace 'build/libcoro-perl-gOw3X4' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 13), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl-xs-dev, perl, build-essential, fakeroot Filtered Build-Depends: debhelper-compat (= 13), libanyevent-perl, libcanary-stability-perl, libcommon-sense-perl, libev-perl, libevent-perl, libguard-perl, perl-xs-dev, perl, build-essential, fakeroot dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [609 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [806 B] Get:5 copy:/<>/apt_archive ./ Packages [776 B] Fetched 2191 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libanyevent-perl libarchive-zip-perl libcanary-stability-perl libcommon-sense-perl libdebhelper-perl libelf1t64 libev-perl libevent-perl libfakeroot libfile-stripnondeterminism-perl libguard-perl libicu72 libmagic-mgc libmagic1t64 libperl-dev libpipeline1 libtool libuchardet0 libxml2 m4 man-db po-debconf sensible-utils Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev groff libio-async-perl libjson-perl | libjson-xs-perl libnet-ssleay-perl libpoe-perl libtask-weaken-perl libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libasync-interrupt-perl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libanyevent-perl libarchive-zip-perl libcanary-stability-perl libcommon-sense-perl libdebhelper-perl libelf1t64 libev-perl libevent-perl libfakeroot libfile-stripnondeterminism-perl libguard-perl libicu72 libmagic-mgc libmagic1t64 libperl-dev libpipeline1 libtool libuchardet0 libxml2 m4 man-db po-debconf sbuild-build-depends-main-dummy sensible-utils 0 upgraded, 39 newly installed, 0 to remove and 0 not upgraded. Need to get 19.1 MB/21.2 MB of archives. After this operation, 81.4 MB of additional disk space will be used. Get:1 file:/srv/reprepro perl-5.40/main amd64 libanyevent-perl amd64 7.170-2+b6 [384 kB] Get:2 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [940 B] Get:3 file:/srv/reprepro perl-5.40/main amd64 libcommon-sense-perl amd64 3.75-3+b3 [22.9 kB] Get:4 file:/srv/reprepro perl-5.40/main amd64 libev-perl amd64 4.34-1+b3 [258 kB] Get:5 file:/srv/reprepro perl-5.40/main amd64 libevent-perl amd64 1.28-2+b3 [259 kB] Get:6 file:/srv/reprepro perl-5.40/main amd64 libguard-perl amd64 1.023-2+b4 [15.6 kB] Get:7 file:/srv/reprepro perl-5.40/main amd64 libperl-dev amd64 5.40.0~rc1-1 [1096 kB] Get:8 http://localhost:3142/debian unstable/main amd64 sensible-utils all 0.0.22 [22.4 kB] Get:9 http://localhost:3142/debian unstable/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get:10 http://localhost:3142/debian unstable/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get:11 http://localhost:3142/debian unstable/main amd64 file amd64 1:5.45-3 [42.9 kB] Get:12 http://localhost:3142/debian unstable/main amd64 gettext-base amd64 0.21-14+b1 [161 kB] Get:13 http://localhost:3142/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get:14 http://localhost:3142/debian unstable/main amd64 groff-base amd64 1.23.0-4 [1180 kB] Get:15 http://localhost:3142/debian unstable/main amd64 bsdextrautils amd64 2.40.1-4 [95.7 kB] Get:16 http://localhost:3142/debian unstable/main amd64 libpipeline1 amd64 1.5.7-2 [38.0 kB] Get:17 http://localhost:3142/debian unstable/main amd64 man-db amd64 2.12.1-1 [1411 kB] Get:18 http://localhost:3142/debian unstable/main amd64 m4 amd64 1.4.19-4 [287 kB] Get:19 http://localhost:3142/debian unstable/main amd64 autoconf all 2.71-3 [332 kB] Get:20 http://localhost:3142/debian unstable/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get:21 http://localhost:3142/debian unstable/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get:22 http://localhost:3142/debian unstable/main amd64 autopoint all 0.21-14 [496 kB] Get:23 http://localhost:3142/debian unstable/main amd64 libdebhelper-perl all 13.15.3 [88.0 kB] Get:24 http://localhost:3142/debian unstable/main amd64 libtool all 2.4.7-7 [517 kB] Get:25 http://localhost:3142/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get:26 http://localhost:3142/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:27 http://localhost:3142/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get:28 http://localhost:3142/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get:29 http://localhost:3142/debian unstable/main amd64 libelf1t64 amd64 0.191-1+b1 [189 kB] Get:30 http://localhost:3142/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get:31 http://localhost:3142/debian unstable/main amd64 libicu72 amd64 72.1-4+b1 [9395 kB] Get:32 http://localhost:3142/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg-2 [670 kB] Get:33 http://localhost:3142/debian unstable/main amd64 gettext amd64 0.21-14+b1 [1301 kB] Get:34 http://localhost:3142/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:35 http://localhost:3142/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get:36 http://localhost:3142/debian unstable/main amd64 debhelper all 13.15.3 [901 kB] Get:37 http://localhost:3142/debian unstable/main amd64 libfakeroot amd64 1.34-1 [28.9 kB] Get:38 http://localhost:3142/debian unstable/main amd64 fakeroot amd64 1.34-1 [74.0 kB] Get:39 http://localhost:3142/debian unstable/main amd64 libcanary-stability-perl all 2013-1 [7884 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 19.1 MB in 0s (111 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 21779 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_amd64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_amd64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.1-4_amd64.deb ... Unpacking bsdextrautils (2.40.1-4) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.7-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-1_amd64.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.191-1+b1_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-4+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-4+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg-2_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg-2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.21-14+b1_amd64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libfakeroot:amd64. Preparing to unpack .../29-libfakeroot_1.34-1_amd64.deb ... Unpacking libfakeroot:amd64 (1.34-1) ... Selecting previously unselected package fakeroot. Preparing to unpack .../30-fakeroot_1.34-1_amd64.deb ... Unpacking fakeroot (1.34-1) ... Selecting previously unselected package libanyevent-perl. Preparing to unpack .../31-libanyevent-perl_7.170-2+b6_amd64.deb ... Unpacking libanyevent-perl (7.170-2+b6) ... Selecting previously unselected package libcanary-stability-perl. Preparing to unpack .../32-libcanary-stability-perl_2013-1_all.deb ... Unpacking libcanary-stability-perl (2013-1) ... Selecting previously unselected package libcommon-sense-perl:amd64. Preparing to unpack .../33-libcommon-sense-perl_3.75-3+b3_amd64.deb ... Unpacking libcommon-sense-perl:amd64 (3.75-3+b3) ... Selecting previously unselected package libev-perl:amd64. Preparing to unpack .../34-libev-perl_4.34-1+b3_amd64.deb ... Unpacking libev-perl:amd64 (4.34-1+b3) ... Selecting previously unselected package libevent-perl. Preparing to unpack .../35-libevent-perl_1.28-2+b3_amd64.deb ... Unpacking libevent-perl (1.28-2+b3) ... Selecting previously unselected package libguard-perl. Preparing to unpack .../36-libguard-perl_1.023-2+b4_amd64.deb ... Unpacking libguard-perl (1.023-2+b4) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../37-libperl-dev_5.40.0~rc1-1_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.0~rc1-1) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../38-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libanyevent-perl (7.170-2+b6) ... Setting up libpipeline1:amd64 (1.5.7-2) ... Setting up libicu72:amd64 (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-4) ... Setting up libevent-perl (1.28-2+b3) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up libcommon-sense-perl:amd64 (3.75-3+b3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:amd64 (5.40.0~rc1-1) ... Setting up file (1:5.45-3) ... Setting up libcanary-stability-perl (2013-1) ... Setting up libfakeroot:amd64 (1.34-1) ... Setting up libelf1t64:amd64 (0.191-1+b1) ... Setting up fakeroot (1.34-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libev-perl:amd64 (4.34-1+b3) ... Setting up libguard-perl (1.023-2+b4) ... Setting up libxml2:amd64 (2.12.7+dfsg-2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-4) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.38-12) ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in any) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 6.1.0-21-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) amd64 (x86_64) Toolchain package versions: binutils_2.42-4 dpkg-dev_1.22.6 g++-13_13.2.0-25 gcc-13_13.2.0-25 libc6-dev_2.38-12 libstdc++-13-dev_13.2.0-25 libstdc++6_14.1.0-1 linux-libc-dev_6.8.12-1 Package versions: adduser_3.137 apt_2.9.4 autoconf_2.71-3 automake_1:1.16.5-1.3 autopoint_0.21-14 autotools-dev_20220109.1 base-files_13.2 base-passwd_3.6.3 bash_5.2.21-2+b1 binutils_2.42-4 binutils-common_2.42-4 binutils-x86-64-linux-gnu_2.42-4 bsdextrautils_2.40.1-4 bsdutils_1:2.40.1-4 build-essential_12.10 bzip2_1.0.8-5.1 coreutils_9.4-3.1 cpp_4:13.2.0-7 cpp-13_13.2.0-25 cpp-13-x86-64-linux-gnu_13.2.0-25 cpp-x86-64-linux-gnu_4:13.2.0-7 dash_0.5.12-8 debconf_1.5.86 debhelper_13.15.3 debian-archive-keyring_2023.4 debianutils_5.17 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffutils_1:3.10-1 dirmngr_2.2.43-7 dpkg_1.22.6 dpkg-dev_1.22.6 dwz_0.15-1+b1 eatmydata_131-2 fakeroot_1.34-1 file_1:5.45-3 findutils_4.9.0-6 g++_4:13.2.0-7 g++-13_13.2.0-25 g++-13-x86-64-linux-gnu_13.2.0-25 g++-x86-64-linux-gnu_4:13.2.0-7 gcc_4:13.2.0-7 gcc-13_13.2.0-25 gcc-13-base_13.2.0-25 gcc-13-x86-64-linux-gnu_13.2.0-25 gcc-14-base_14.1.0-1 gcc-x86-64-linux-gnu_4:13.2.0-7 gettext_0.21-14+b1 gettext-base_0.21-14+b1 gnupg_2.2.43-7 gnupg-l10n_2.2.43-7 gnupg-utils_2.2.43-7 gpg_2.2.43-7 gpg-agent_2.2.43-7 gpg-wks-client_2.2.43-7 gpgconf_2.2.43-7 gpgsm_2.2.43-7 gpgv_2.2.43-7 grep_3.11-4 groff-base_1.23.0-4 gzip_1.12-1.1 hostname_3.23+nmu2 init-system-helpers_1.66 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-2 libanyevent-perl_7.170-2+b6 libapt-pkg6.0t64_2.9.4 libarchive-zip-perl_1.68-1 libasan8_14.1.0-1 libassuan0_2.5.6-1+b1 libatomic1_14.1.0-1 libattr1_1:2.5.2-1 libaudit-common_1:3.1.2-2.1 libaudit1_1:3.1.2-2.1 libbinutils_2.42-4 libblkid1_2.40.1-4 libbz2-1.0_1.0.8-5.1 libc-bin_2.38-12 libc-dev-bin_2.38-12 libc-l10n_2.38-12 libc6_2.38-12 libc6-dev_2.38-12 libcanary-stability-perl_2013-1 libcap-ng0_0.8.5-1 libcap2_1:2.66-5 libcc1-0_14.1.0-1 libcommon-sense-perl_3.75-3+b3 libcrypt-dev_1:4.4.36-4 libcrypt1_1:4.4.36-4 libctf-nobfd0_2.42-4 libctf0_2.42-4 libdb5.3t64_5.3.28+dfsg2-7 libdebconfclient0_0.272 libdebhelper-perl_13.15.3 libdpkg-perl_1.22.6 libeatmydata1_131-2 libelf1t64_0.191-1+b1 libev-perl_4.34-1+b3 libevent-perl_1.28-2+b3 libfakeroot_1.34-1 libffi8_3.4.6-1 libfile-stripnondeterminism-perl_1.14.0-1 libgcc-13-dev_13.2.0-25 libgcc-s1_14.1.0-1 libgcrypt20_1.10.3-3 libgdbm-compat4t64_1.23-5.1+b1 libgdbm6t64_1.23-5.1+b1 libgmp10_2:6.3.0+dfsg-2+b1 libgnutls30t64_3.8.5-3 libgomp1_14.1.0-1 libgpg-error0_1.49-2 libgprofng0_2.42-4 libguard-perl_1.023-2+b4 libhogweed6t64_3.9.1-2.2 libhwasan0_14.1.0-1 libicu72_72.1-4+b1 libidn2-0_2.3.7-2 libisl23_0.26-3+b2 libitm1_14.1.0-1 libjansson4_2.14-2+b2 libksba8_1.6.6-1 libldap-2.5-0_2.5.17+dfsg-1+b1 liblsan0_14.1.0-1 liblz4-1_1.9.4-2 liblzma5_5.6.1+really5.4.5-1 libmagic-mgc_1:5.45-3 libmagic1t64_1:5.45-3 libmd0_1.1.0-2 libmount1_2.40.1-4 libmpc3_1.3.1-1+b2 libmpfr6_4.2.1-1+b1 libncursesw6_6.5-2 libnettle8t64_3.9.1-2.2 libnpth0t64_1.6-3.1 libp11-kit0_0.25.3-5 libpam-modules_1.5.3-7 libpam-modules-bin_1.5.3-7 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7 libpcre2-8-0_10.42-4+b1 libperl-dev_5.40.0~rc1-1 libperl5.38t64_5.38.2-5 libperl5.40_5.40.0~rc1-1 libpipeline1_1.5.7-2 libquadmath0_14.1.0-1 libreadline8t64_8.2-4 libsasl2-2_2.1.28+dfsg1-6 libsasl2-modules-db_2.1.28+dfsg1-6 libseccomp2_2.5.5-1 libselinux1_3.5-2+b2 libsemanage-common_3.5-1 libsemanage2_3.5-1+b3 libsepol2_3.5-2+b1 libsframe1_2.42-4 libsmartcols1_2.40.1-4 libsqlite3-0_3.46.0-1 libssl3t64_3.2.1-3 libstdc++-13-dev_13.2.0-25 libstdc++6_14.1.0-1 libsystemd0_256~rc3-7 libtasn1-6_4.19.0-3+b2 libtinfo6_6.5-2 libtool_2.4.7-7 libtsan2_14.1.0-1 libubsan1_14.1.0-1 libuchardet0_0.0.8-1+b1 libudev1_256~rc3-7 libunistring5_1.2-1 libuuid1_2.40.1-4 libxml2_2.12.7+dfsg-2 libxxhash0_0.8.2-2+b1 libzstd1_1.5.5+dfsg2-2 linux-libc-dev_6.8.12-1 locales-all_2.38-12 login_1:4.13+dfsg1-4 m4_1.4.19-4 make_4.3-4.1 man-db_2.12.1-1 mawk_1.3.4.20240123-1 ncurses-base_6.5-2 ncurses-bin_6.5-2 passwd_1:4.13+dfsg1-4 patch_2.7.6-7 perl_5.40.0~rc1-1 perl-base_5.40.0~rc1-1 perl-modules-5.38_5.38.2-5 perl-modules-5.40_5.40.0~rc1-1 pinentry-curses_1.2.1-3+b2 po-debconf_1.0.21+nmu1 readline-common_8.2-4 rpcsvc-proto_1.4.3-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2 sensible-utils_0.0.22 sysvinit-utils_3.09-1 tar_1.35+dfsg-3 usr-is-merged_39 util-linux_2.40.1-4 xz-utils_5.6.1+really5.4.5-1 zlib1g_1:1.3.dfsg+really1.3.1-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libcoro-perl Binary: libcoro-perl Architecture: any Version: 6.570-3 Maintainer: Debian Perl Group Uploaders: gregor herrmann , Xavier Guimard Homepage: https://metacpan.org/release/Coro Standards-Version: 4.6.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libcoro-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libcoro-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libanyevent-perl , libcanary-stability-perl, libcommon-sense-perl , libev-perl , libevent-perl , libguard-perl , perl-xs-dev, perl:native Package-List: libcoro-perl deb perl optional arch=any Checksums-Sha1: 1ff1c7aee5cd1c31fbc50c38ab86d0ab0930417d 198128 libcoro-perl_6.570.orig.tar.gz 8eadb79d486e5f0fb1f0f431ef05828b443caa07 8040 libcoro-perl_6.570-3.debian.tar.xz Checksums-Sha256: 1928e48033540e11ebf5506986dd101af78d2421d210f96599223b15d51714c6 198128 libcoro-perl_6.570.orig.tar.gz 8d551de32102795bf390787a89772615483d74ddc535d27a02ad02835110475c 8040 libcoro-perl_6.570-3.debian.tar.xz Files: fa5970a2a2f3df9d68d4369c7dde1a55 198128 libcoro-perl_6.570.orig.tar.gz b0bb002ce51d19104909a02f6c0869bc 8040 libcoro-perl_6.570-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmNILwQACgkQV5wWDUye I+hLbRAApBOXVGzXguBNK9MFoOn4keInrXFxaRWKs2BFQop/9otmx0KDVCQ0SVpq FPWClvUnb5GHtuf4GIF7eC2+oOZ0JNw0qTgiTG7OyGHTeZgrWYI8TwVJykDp0j+M h7YU2vPXml45Tl3AsBUNNVfRq9XrFMYfNTdeHhqfSjBNay3cWUoqaDVW3lxk1c7W Pa6ScOeHdLErodURmBALyW+Jw9AqDDgLHsGaJEngmjN9E7XTtV/UQ1iFiMobSYi8 n/jIOxYLQNZsI7RuQefZb9rnQ2HupLECcwZv5zv709LCw3LhtrHYpnBcN4bPDv2B Tv4Ga/yuoGr/maAzf2ItIl8zQaT8oBCFr95xc4HvWhqkviV9qZpazem+6OfYSy7t O5+5dr+VgmU6FoEnd0YGU5FnJL48t0IIZp//dMpXth5vrcbZtwt/+Yx94u0YgS32 dC5+1qGBPrEzMUqKZxnAg1jwAvOxCSD5qqcX8JHbxNe4iPTm64jkAnfjU9d6tJxl v71abriNuhy30RNBg/LY4/zmdxL+hEvAkfDCglxuyOv5C8d0h2E2kT8Jww8d+vD/ I6Se83Jjyu9FPRVd+e+aRRTSLNQN6GLpTKi5QUJYnNaGUv7//jJN1b0g6V9gsaeZ et1NREutX3m+Ts4OzgCuQPXX3G1it40HAnQXwKneqkEh0SV/Et0= =SebT -----END PGP SIGNATURE----- gpgv: Signature made Thu Oct 13 15:30:12 2022 UTC gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libcoro-perl_6.570-3.dsc: no acceptable signature found dpkg-source: info: extracting libcoro-perl in /<> dpkg-source: info: unpacking libcoro-perl_6.570.orig.tar.gz dpkg-source: info: unpacking libcoro-perl_6.570-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying whatis.patch dpkg-source: info: applying spelling.patch Check disk space ---------------- Sufficient free space for build Hack binNMU version ------------------- Created changelog entry for binNMU version 6.570-3+b4 +------------------------------------------------------------------------------+ | Starting Timed Build Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libcoro-perl_6.570-3 perl-5.40 amd64 ----------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libcoro-perl_6.570-3 perl-5.40 amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANG=en_GB.UTF-8 LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=perl-5.40-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.40-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.40-amd64-debomatic-873fd7d4-b2a0-4c2c-8c53-17a74c205eca SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -mDebian Perl autobuilder -B -rfakeroot -Zxz dpkg-buildpackage: info: source package libcoro-perl dpkg-buildpackage: info: source version 6.570-3+b4 dpkg-buildpackage: info: source distribution perl-5.40 dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary-arch dh binary-arch dh_update_autotools_config -a dh_autoreconf -a dh_auto_configure -a /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" *** *** Canary::Stability COMPATIBILITY AND SUPPORT CHECK *** ================================================= *** *** Hi! *** *** I do my best to provide predictable and reliable software. *** *** However, in recent releases, P5P (who maintain perl) have been *** introducing regressions that are sometimes subtle and at other times *** catastrophic, often for personal preferences with little or no concern *** for existing code, most notably CPAN. *** *** For this reason, it has become very hard for me to maintain the level *** of reliability and support I have committed myself to in the past, at *** least with some perl versions: I simply can't keep up working around new *** bugs or gratituous incompatibilities, and in turn you might suffer from *** unanticipated problems. *** *** Therefore I have introduced a support and compatibility check, the results *** of which follow below, together with a FAQ and some recommendations. *** *** This check is just to let you know that there might be a risk, so you can *** make judgement calls on how to proceed - it will not keep the module from *** installing or working. *** *** The stability canary says: (nothing, it was driven away by harsh weather) *** *** It seems you are running perl version 5.040000, likely the "official" or *** "standard" version. While there is nothing wrong with doing that, *** standard perl versions 5.022 and up are not supported by Coro. *** While this might be fatal, it might also be all right - if you run into *** problems, you might want to downgrade your perl or switch to the *** stability branch. *** *** If everything works fine, you can ignore this message. *** *** *** Stability canary mini-FAQ: *** *** Do I need to do anything? *** With luck, no. While some distributions are known to fail *** already, most should probably work. This message is here *** to alert you that your perl is not supported by Coro, *** and if things go wrong, you either need to downgrade, or *** sidegrade to the stability variant of your perl version, *** or simply live with the consequences. *** *** What is this canary thing? *** It's purpose is to check support status of Coro with *** respect to your perl version. *** *** What is this "stability branch"? *** It's a branch or fork of the official perl, by schmorp, to *** improve stability and compatibility with existing modules. *** *** How can I skip this prompt on automated installs? *** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment. *** More info is in the Canary::Stability manpage. *** *** Long version of this FAQ: http://stableperl.schmorp.de/faq.html *** Stability Branch homepage: http://stableperl.schmorp.de/ *** Continue anyways? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Event version 1.28 found, building Event support. EV version 4.34 found, building EV support. Checking if your kit is complete... Looks good *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has a number of configuration options. Due to its maturity, the defaults that Coro chooses are usually fine, so you can decide to skip these questions. Only if something went wrong you should select 'n' here and manually configure Coro, and, of course, report this to the maintainer :) Skip further questions and use defaults (y/n)? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a number of methods to implement coroutines at the C level. The default chosen is based on your current confguration and is correct in most cases, but you still can chose between these alternatives: u The unix 'ucontext.h' functions are relatively new and not implemented or well-tested in older unices. They allow very fast coroutine creation and reasonably fast switching. They are, however, usually slower than the other alternatives due to an extra syscall done by swapcontext. And while nominally most portable (it's the only POSIX-standardised interface for coroutines), ucontext functions are, as usual, broken on most/all BSDs. s If the ucontext functions are not working or you don't want to use them for other reasons you can try a workaround using setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine creation is rather slow, but switching is very fast (often much faster than with the ucontext functions). Unfortunately, glibc-2.1 and below don't even feature a working sigaltstack. You cannot use this implementation if some other code uses SIGUSR2 or you plan to create coroutines from an alternative signal stack, as both are being used for coroutine creation. a Handcoded assembly. This is the fastest and most compatible method, with the least side effects, if it works, that is. It has been tested on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64 systems using the SVR ELF ABI (it is also reported to be working on Strawberry Perl for Windows using MinGW). This is the recommended method on supported platforms. When it doesn't work, use another method, such as (s)etjmp/longjmp. l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need this hack. Since it is very linux-specific it is also quite fast and recommended even for newer versions; when it works, that is (currently x86 and a few others only. If it compiles, it's usually ok). Newer glibc versions (>= 2.5) stop working with this implementation however. i IRIX. For some reason, SGI really does not like to follow POSIX (does that surprise you?), so this workaround might be needed (it's fast), although [s] and [u] should also work now. w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry Perl), although, as there is no standard on how to do this under windows, different environments might work differently. Doh. f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower and uses a lot more memory, but should be working all the time. p Use pthread API. Try to avoid this option, it was only created to make a point about the programming language shootout. It is unlikely to work with perls that have windows process emulation enabled ("perl threads"). It is also likely the slowest method of implementing coroutines. It might work fine as a last resort, however, as the pthread API is slightly better tested than ucontext functions for example. Of course, not on BSDs, who usually have very broken pthread implementations. Coro tries hard to come up with a suitable default for most systems, so pressing return at the prompt usually does the right thing. If you experience problems (e.g. make test fails) then you should experiment with this setting. Use which implementation, etjmp, ctx, sm, rix, inux,

threads, indows, iber? [a] a Using handcoded assembler implementation *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Per-context stack size factor: Depending on your settings, Coro tries to share the C stacks is creates as much as possible, but sometimes it needs to allocate a new one. This setting controls the maximum size that gets allocated, and should not be set too high, as memory and address space still is wasted even if it's not fully used. The value entered will be multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8 on 64-bit systems. A setting of 16384 (the default) therefore corresponds to a 64k..128k stack, which usually is ample space (you might even want to try 8192 or lower if your program creates many coroutines). On systems supporting mmap and dynamic memory management, the actual memory usually gets allocated on demand, but with many large stacks you can still run out of address space on your typical 32 bit platform (not to forget the pagetables). Some perls (mostly threaded ones and perl compiled under linux 2.6) and some programs (inefficient regexes can use a lot of stack space) may need much, much more: If Coro segfaults with weird backtraces (e.g. in a function prologue) or in t/10_bugs.t, you might want to increase this to 65536 or more. The default should be fine, and can be changed at runtime with Coro::State::cctx_stacksize. C stack size factor? [16384] 16384 using a stacksize of 16384 * sizeof(void*) *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can optionally put a guard area before each stack segment: When the stack is too small and the access is not too far outside the stack (i.e. within the guard area), then the program will safely segfault instead of running into other data. The cost is some additional overhead with is usually negligible, and extra use of address space. The guard area size currently needs to be specified in pages (typical pagesizes are 4k and 8k). The guard area is only enabled on a few hardcoded architectures and is ignored on others. The actual preprocessor expression disables this feature if: !__i386 && !__x86_64 && !__powerpc && !__m68k && !__alpha && !__mips && !__sparc64 The default, as usual, should be just fine. Number of guard pages (0 disables)? [4] 4 *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can tell valgrind about its stacks and so reduce spurious warnings where valgrind would otherwise complain about possible stack switches. Enabling this does not incur noticable runtime or memory overhead, but it requires that you have the header file available. Valgrind support is completely optional, so disabling it is the safe choice. Enable valgrind support (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use (or even trick) some perl functions into doing what it needs instead of relying on (some) of its own functions. This might increase chances that it compiles and works, but it could just as well result in memory leaks, crashes or silent data corruption. It certainly does result in slightly slower speed and higher memory consumption, though, so YOU SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT. Prefer perl functions over coro functions (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a simple JIT compiler to compile a part of the thread switch function at runtime. On perls with windows process emulation (most!), this results in a 50% speed improvement. On sane perls, the gain is much less, usually around 5%. If you enable this option, then the JIT will be enabled, on compatible operating systems and CPUs (currently only x86/amd64 on certain unix clones). Otherwise, it will be disabled. It should be safe to leave on - this setting is only here so you can switch it off in case of problems. Note that some broken kernels (often calling themselves "hardened") break all JIT generation by manipulating some system calls. If you get bus errors or segmentation faults immediately when the JIT is enabled but not without, then note that disabling the JIT only fixes some symptoms, not the underlying problem, and you might run into other problems later. Try to use the JIT compiler, if available? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has experimental support for cloning states. This can be used to implement a scheme-like call/cc. However, this doesn't add to the expressiveness in general, and is likely perl-version specific (and perl 5.12 deliberately removed support for it). As such, it is disabled by default. Enable it when you want to play around with it, but note that it isn't supported, and unlikely ever will be. It exists mainly to prove that it could be done - if only it were useful for something. Implement Coro::State->clone method (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Coro Writing MYMETA.yml and MYMETA.json dh_auto_build -a make -j2 make[1]: Entering directory '/<>' cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h cp Coro/Storable.pm blib/lib/Coro/Storable.pm cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl cp Coro/Channel.pm blib/lib/Coro/Channel.pm cp Coro/Util.pm blib/lib/Coro/Util.pm cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm cp Coro/State.pm blib/lib/Coro/State.pm cp Coro/Socket.pm blib/lib/Coro/Socket.pm cp Coro/AIO.pm blib/lib/Coro/AIO.pm cp Coro/BDB.pm blib/lib/Coro/BDB.pm cp Coro/Signal.pm blib/lib/Coro/Signal.pm cp Coro/Debug.pm blib/lib/Coro/Debug.pm cp Coro.pm blib/lib/Coro.pm cp Coro/LWP.pm blib/lib/Coro/LWP.pm cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm cp Coro/Specific.pm blib/lib/Coro/Specific.pm cp Coro/Timer.pm blib/lib/Coro/Timer.pm cp Coro/Select.pm blib/lib/Coro/Select.pm cp Coro/Handle.pm blib/lib/Coro/Handle.pm make[2]: Entering directory '/<>/Coro' Running Mkbootstrap for State () cp Intro.pod ../blib/lib/Coro/Intro.pod Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged) Skip ../blib/lib/Coro/BDB.pm (unchanged) Skip ../blib/lib/Coro/Storable.pm (unchanged) Skip ../blib/lib/Coro/Handle.pm (unchanged) Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged) Skip ../blib/lib/Coro/Debug.pm (unchanged) Skip ../blib/lib/Coro/LWP.pm (unchanged) Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged) Skip ../blib/lib/Coro/Channel.pm (unchanged) Skip ../blib/lib/Coro/Util.pm (unchanged) Skip ../blib/lib/Coro/Semaphore.pm (unchanged) Skip ../blib/lib/Coro/Timer.pm (unchanged) Skip ../blib/lib/Coro/MakeMaker.pm (unchanged) Skip ../blib/lib/Coro/RWLock.pm (unchanged) Skip ../blib/lib/Coro/AnyEvent.pm (unchanged) Skip ../blib/lib/Coro/Select.pm (unchanged) Skip ../blib/lib/Coro/AIO.pm (unchanged) Skip ../blib/lib/Coro/Specific.pm (unchanged) Skip ../blib/lib/Coro/Socket.pm (unchanged) Skip ../blib/lib/Coro/Signal.pm (unchanged) Skip ../blib/lib/Coro/State.pm (unchanged) "/usr/bin/perl" "/usr/share/perl/5.40.0/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/<>/Coro/typemap' State.xs > State.xsc chmod 644 "State.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 mv State.xsc State.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" -DCORO_ASM -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c rm -f ../blib/arch/auto/Coro/State/State.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so \ \ chmod 755 ../blib/arch/auto/Coro/State/State.so Manifying 20 pod documents make[2]: Leaving directory '/<>/Coro' make[2]: Entering directory '/<>/Event' Running Mkbootstrap for Event () cp Event.pm ../blib/lib/Coro/Event.pm "/usr/bin/perl" "/usr/share/perl/5.40.0/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' Event.xs > Event.xsc chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 mv Event.xsc Event.c x86_64-linux-gnu-gcc -c -I/usr/lib/x86_64-linux-gnu/perl5/5.40/Event -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c rm -f ../blib/arch/auto/Coro/Event/Event.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so \ \ chmod 755 ../blib/arch/auto/Coro/Event/Event.so Manifying 1 pod document make[2]: Leaving directory '/<>/Event' make[2]: Entering directory '/<>/EV' Running Mkbootstrap for EV () cp EV.pm ../blib/lib/Coro/EV.pm "/usr/bin/perl" "/usr/share/perl/5.40.0/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' EV.xs > EV.xsc chmod 644 "EV.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 mv EV.xsc EV.c x86_64-linux-gnu-gcc -c -I/usr/lib/x86_64-linux-gnu/perl5/5.40/EV -I/usr/lib/x86_64-linux-gnu/perl5/5.40 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c rm -f ../blib/arch/auto/Coro/EV/EV.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so \ \ chmod 755 ../blib/arch/auto/Coro/EV/EV.so Manifying 1 pod document make[2]: Leaving directory '/<>/EV' Manifying 20 pod documents make[1]: Leaving directory '/<>' dh_auto_test -a make -j2 test TEST_VERBOSE=1 make[1]: Entering directory '/<>' make[2]: Entering directory '/<>/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[2]: Leaving directory '/<>/Coro' make[2]: Entering directory '/<>/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[2]: Leaving directory '/<>/Event' make[2]: Entering directory '/<>/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[2]: Leaving directory '/<>/EV' make[2]: Entering directory '/<>/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 No tests defined for Coro::State extension. make[2]: Leaving directory '/<>/Coro' make[2]: Entering directory '/<>/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 0 wallclock secs ( 0.01 usr 0.01 sys + 0.05 cusr 0.02 csys = 0.09 CPU) Result: PASS make[2]: Leaving directory '/<>/Event' make[2]: Entering directory '/<>/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, '../blib/lib', '../blib/arch')" t/*.t t/00_basic.t .... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/01_unblock.t .. 1..12 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok All tests successful. Files=2, Tests=17, 0 wallclock secs ( 0.01 usr 0.01 sys + 0.03 cusr 0.02 csys = 0.07 CPU) Result: PASS make[2]: Leaving directory '/<>/EV' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_basic.t .......... 1..9 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok t/01_process.t ........ 1..13 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok t/02_channel.t ........ 1..19 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok t/03_channel.t ........ 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/04_rwlock.t ......... 1..25 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok t/05_specific.t ....... 1..8 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok t/06_prio.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/07_eval.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/08_join.t ........... 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok t/10_bugs.t ........... 1..3 ok 1 ok 2 ok 3 ok t/11_deadlock.t ....... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/12_exit.t ........... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/13_diewarn.t ........ 1..7 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok t/14_load.t ........... 1..17 ok 1 # Coro::State () ok 2 # Coro () ok 3 # Coro::MakeMaker () ok 4 # Coro::Signal () ok 5 # Coro::Semaphore () ok 6 # Coro::SemaphoreSet () ok 7 # Coro::Channel () ok 8 # Coro::Specific () ok 9 # Coro::RWLock () ok 10 # Coro::AnyEvent () ok 11 # Coro::Timer () ok 12 # Coro::Util () ok 13 # Coro::Select () ok 14 # Coro::Handle () ok 15 # Coro::Socket () ok 16 # Coro::Storable () ok 17 # Coro::Debug () ok t/15_semaphore.t ...... 1..6 ok 1 # 998 ok 2 ok 3 ok 4 ok 5 ok 6 ok t/16_signal.t ......... 1..18 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok t/17_rouse.t .......... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/18_winder.t ......... 1..17 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok t/19_handle.t ......... 1..4 ok 1 ok 2 ok 3 ok 4 ok t/20_mutual_cancel.t .. 1..10 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok All tests successful. Files=20, Tests=206, 0 wallclock secs ( 0.06 usr 0.01 sys + 0.23 cusr 0.12 csys = 0.42 CPU) Result: PASS make[1]: Leaving directory '/<>' create-stamp debian/debhelper-build-stamp dh_prep -a debian/rules override_dh_auto_install make[1]: Entering directory '/<>' dh_auto_install make -j2 install DESTDIR=/<>/debian/libcoro-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/<>' make[3]: Entering directory '/<>/Coro' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents make[3]: Leaving directory '/<>/Coro' make[3]: Entering directory '/<>/Event' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document make[3]: Leaving directory '/<>/Event' make[3]: Entering directory '/<>/EV' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document make[3]: Leaving directory '/<>/EV' Manifying 20 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/State/State.so Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/Event/Event.so Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/EV/EV.so Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Intro.pod Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Semaphore.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Handle.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Event.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Util.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Socket.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/MakeMaker.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/SemaphoreSet.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/RWLock.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Channel.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Signal.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/CoroAPI.h Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/State.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/BDB.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/EV.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Timer.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/jit-x86-unix.pl Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Select.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/AIO.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/jit-amd64-unix.pl Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Debug.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/LWP.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/AnyEvent.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Storable.pm Installing /<>/debian/libcoro-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Specific.pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Event.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::EV.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm Installing /<>/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm make[2]: Leaving directory '/<>' sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /<>/debian/libcoro-perl//usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/*.pl make[1]: Leaving directory '/<>' dh_installdocs -a dh_installchangelogs -a debian/rules override_dh_installexamples make[1]: Entering directory '/<>' dh_installexamples sed -i '1s|^#!/opt/bin/perl|#!/usr/bin/perl|' /<>/debian/libcoro-perl/usr/share/doc/libcoro-perl/examples/* make[1]: Leaving directory '/<>' dh_installman -a dh_perl -a dh_link -a dh_strip_nondeterminism -a dh_compress -a dh_fixperms -a dh_missing -a dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb -a dh_gencontrol -a dh_md5sums -a dh_builddeb -a dpkg-deb: building package 'libcoro-perl-dbgsym' in '../libcoro-perl-dbgsym_6.570-3+b4_amd64.deb'. dpkg-deb: building package 'libcoro-perl' in '../libcoro-perl_6.570-3+b4_amd64.deb'. dpkg-genbuildinfo --build=any -O../libcoro-perl_6.570-3+b4_amd64.buildinfo dpkg-genchanges --build=any -mDebian Perl autobuilder -O../libcoro-perl_6.570-3+b4_amd64.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source -Zxz --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2024-06-02T14:21:56Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ libcoro-perl_6.570-3+b4_amd64.changes: -------------------------------------- Format: 1.8 Date: Sun, 02 Jun 2024 14:21:46 +0000 Source: libcoro-perl (6.570-3) Binary: libcoro-perl libcoro-perl-dbgsym Binary-Only: yes Architecture: amd64 Version: 6.570-3+b4 Distribution: perl-5.40 Urgency: low Maintainer: Debian Perl autobuilder Changed-By: Debian Perl autobuilder Description: libcoro-perl - Perl framework implementing coroutines Changes: libcoro-perl (6.570-3+b4) perl-5.40; urgency=low, binary-only=yes . * Binary-only non-maintainer upload for amd64; no source changes. * Rebuild for Perl 5.40 Checksums-Sha1: 5081ac45a994da79a2cef0b010407fd3eef7d2e5 186928 libcoro-perl-dbgsym_6.570-3+b4_amd64.deb 7f6360e3d5712fd1bbdfcec35f364f6b2eab0e7e 5519 libcoro-perl_6.570-3+b4_amd64.buildinfo 8454064dc09e29bfa69731d00754457bfe7944e1 219784 libcoro-perl_6.570-3+b4_amd64.deb Checksums-Sha256: d8d02586ac713bcae77e51128b8dfee51e12a2bf817c49c5d6a58e1da1c416f5 186928 libcoro-perl-dbgsym_6.570-3+b4_amd64.deb d60182e37a50cadd0d3e8ffa22ae8557609b064d872c061444ddb587d1d2a66e 5519 libcoro-perl_6.570-3+b4_amd64.buildinfo 9d053fd32b8d8fe23ce3dcd3cad146693f0076eb5ec33efeb6ee9d3dce8a3eb7 219784 libcoro-perl_6.570-3+b4_amd64.deb Files: 2c23f9e32a17e84063a8f51faad042e9 186928 debug optional libcoro-perl-dbgsym_6.570-3+b4_amd64.deb 1e1d06da70efd5ad94e02cf56af86cf3 5519 perl optional libcoro-perl_6.570-3+b4_amd64.buildinfo 4f0ea0348a33ca4f92464e99d3662aef 219784 perl optional libcoro-perl_6.570-3+b4_amd64.deb +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: libcoro-perl (6.570-3) Binary: libcoro-perl libcoro-perl-dbgsym Architecture: amd64 Version: 6.570-3+b4 Binary-Only-Changes: libcoro-perl (6.570-3+b4) perl-5.40; urgency=low, binary-only=yes . * Binary-only non-maintainer upload for amd64; no source changes. * Rebuild for Perl 5.40 . -- Debian Perl autobuilder Sun, 02 Jun 2024 14:21:46 +0000 Checksums-Md5: 2c23f9e32a17e84063a8f51faad042e9 186928 libcoro-perl-dbgsym_6.570-3+b4_amd64.deb 4f0ea0348a33ca4f92464e99d3662aef 219784 libcoro-perl_6.570-3+b4_amd64.deb Checksums-Sha1: 5081ac45a994da79a2cef0b010407fd3eef7d2e5 186928 libcoro-perl-dbgsym_6.570-3+b4_amd64.deb 8454064dc09e29bfa69731d00754457bfe7944e1 219784 libcoro-perl_6.570-3+b4_amd64.deb Checksums-Sha256: d8d02586ac713bcae77e51128b8dfee51e12a2bf817c49c5d6a58e1da1c416f5 186928 libcoro-perl-dbgsym_6.570-3+b4_amd64.deb 9d053fd32b8d8fe23ce3dcd3cad146693f0076eb5ec33efeb6ee9d3dce8a3eb7 219784 libcoro-perl_6.570-3+b4_amd64.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Sun, 02 Jun 2024 14:21:55 +0000 Build-Path: /<> Build-Tainted-By: merged-usr-via-aliased-dirs usr-local-has-programs Installed-Build-Depends: autoconf (= 2.71-3), automake (= 1:1.16.5-1.3), autopoint (= 0.21-14), autotools-dev (= 20220109.1), base-files (= 13.2), base-passwd (= 3.6.3), bash (= 5.2.21-2+b1), binutils (= 2.42-4), binutils-common (= 2.42-4), binutils-x86-64-linux-gnu (= 2.42-4), bsdextrautils (= 2.40.1-4), bsdutils (= 1:2.40.1-4), build-essential (= 12.10), bzip2 (= 1.0.8-5.1), coreutils (= 9.4-3.1), cpp (= 4:13.2.0-7), cpp-13 (= 13.2.0-25), cpp-13-x86-64-linux-gnu (= 13.2.0-25), cpp-x86-64-linux-gnu (= 4:13.2.0-7), dash (= 0.5.12-8), debconf (= 1.5.86), debhelper (= 13.15.3), debianutils (= 5.17), dh-autoreconf (= 20), dh-strip-nondeterminism (= 1.14.0-1), diffutils (= 1:3.10-1), dpkg (= 1.22.6), dpkg-dev (= 1.22.6), dwz (= 0.15-1+b1), file (= 1:5.45-3), findutils (= 4.9.0-6), g++ (= 4:13.2.0-7), g++-13 (= 13.2.0-25), g++-13-x86-64-linux-gnu (= 13.2.0-25), g++-x86-64-linux-gnu (= 4:13.2.0-7), gcc (= 4:13.2.0-7), gcc-13 (= 13.2.0-25), gcc-13-base (= 13.2.0-25), gcc-13-x86-64-linux-gnu (= 13.2.0-25), gcc-14-base (= 14.1.0-1), gcc-x86-64-linux-gnu (= 4:13.2.0-7), gettext (= 0.21-14+b1), gettext-base (= 0.21-14+b1), grep (= 3.11-4), groff-base (= 1.23.0-4), gzip (= 1.12-1.1), hostname (= 3.23+nmu2), init-system-helpers (= 1.66), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.3.2-2), libanyevent-perl (= 7.170-2+b6), libarchive-zip-perl (= 1.68-1), libasan8 (= 14.1.0-1), libatomic1 (= 14.1.0-1), libattr1 (= 1:2.5.2-1), libaudit-common (= 1:3.1.2-2.1), libaudit1 (= 1:3.1.2-2.1), libbinutils (= 2.42-4), libblkid1 (= 2.40.1-4), libbz2-1.0 (= 1.0.8-5.1), libc-bin (= 2.38-12), libc-dev-bin (= 2.38-12), libc6 (= 2.38-12), libc6-dev (= 2.38-12), libcanary-stability-perl (= 2013-1), libcap-ng0 (= 0.8.5-1), libcap2 (= 1:2.66-5), libcc1-0 (= 14.1.0-1), libcommon-sense-perl (= 3.75-3+b3), libcrypt-dev (= 1:4.4.36-4), libcrypt1 (= 1:4.4.36-4), libctf-nobfd0 (= 2.42-4), libctf0 (= 2.42-4), libdb5.3t64 (= 5.3.28+dfsg2-7), libdebconfclient0 (= 0.272), libdebhelper-perl (= 13.15.3), libdpkg-perl (= 1.22.6), libelf1t64 (= 0.191-1+b1), libev-perl (= 4.34-1+b3), libevent-perl (= 1.28-2+b3), libfile-stripnondeterminism-perl (= 1.14.0-1), libgcc-13-dev (= 13.2.0-25), libgcc-s1 (= 14.1.0-1), libgdbm-compat4t64 (= 1.23-5.1+b1), libgdbm6t64 (= 1.23-5.1+b1), libgmp10 (= 2:6.3.0+dfsg-2+b1), libgomp1 (= 14.1.0-1), libgprofng0 (= 2.42-4), libguard-perl (= 1.023-2+b4), libhwasan0 (= 14.1.0-1), libicu72 (= 72.1-4+b1), libisl23 (= 0.26-3+b2), libitm1 (= 14.1.0-1), libjansson4 (= 2.14-2+b2), liblsan0 (= 14.1.0-1), liblzma5 (= 5.6.1+really5.4.5-1), libmagic-mgc (= 1:5.45-3), libmagic1t64 (= 1:5.45-3), libmd0 (= 1.1.0-2), libmount1 (= 2.40.1-4), libmpc3 (= 1.3.1-1+b2), libmpfr6 (= 4.2.1-1+b1), libpam-modules (= 1.5.3-7), libpam-modules-bin (= 1.5.3-7), libpam-runtime (= 1.5.3-7), libpam0g (= 1.5.3-7), libpcre2-8-0 (= 10.42-4+b1), libperl-dev (= 5.40.0~rc1-1), libperl5.40 (= 5.40.0~rc1-1), libpipeline1 (= 1.5.7-2), libquadmath0 (= 14.1.0-1), libseccomp2 (= 2.5.5-1), libselinux1 (= 3.5-2+b2), libsframe1 (= 2.42-4), libsmartcols1 (= 2.40.1-4), libssl3t64 (= 3.2.1-3), libstdc++-13-dev (= 13.2.0-25), libstdc++6 (= 14.1.0-1), libsystemd0 (= 256~rc3-7), libtinfo6 (= 6.5-2), libtool (= 2.4.7-7), libtsan2 (= 14.1.0-1), libubsan1 (= 14.1.0-1), libuchardet0 (= 0.0.8-1+b1), libudev1 (= 256~rc3-7), libunistring5 (= 1.2-1), libuuid1 (= 2.40.1-4), libxml2 (= 2.12.7+dfsg-2), libzstd1 (= 1.5.5+dfsg2-2), linux-libc-dev (= 6.8.12-1), login (= 1:4.13+dfsg1-4), m4 (= 1.4.19-4), make (= 4.3-4.1), man-db (= 2.12.1-1), mawk (= 1.3.4.20240123-1), ncurses-base (= 6.5-2), ncurses-bin (= 6.5-2), patch (= 2.7.6-7), perl (= 5.40.0~rc1-1), perl-base (= 5.40.0~rc1-1), perl-modules-5.40 (= 5.40.0~rc1-1), po-debconf (= 1.0.21+nmu1), rpcsvc-proto (= 1.4.3-1), sed (= 4.9-2), sensible-utils (= 0.0.22), sysvinit-utils (= 3.09-1), tar (= 1.35+dfsg-3), usr-is-merged (= 39), util-linux (= 2.40.1-4), xz-utils (= 5.6.1+really5.4.5-1), zlib1g (= 1:1.3.dfsg+really1.3.1-1) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="en_GB.UTF-8" LC_ALL="C.UTF-8" LC_COLLATE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" SOURCE_DATE_EPOCH="1717338106" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libcoro-perl-dbgsym_6.570-3+b4_amd64.deb ---------------------------------------- new Debian package, version 2.0. size 186928 bytes: control archive=692 bytes. 480 bytes, 12 lines control 407 bytes, 4 lines md5sums Package: libcoro-perl-dbgsym Source: libcoro-perl (6.570-3) Version: 6.570-3+b4 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian Perl Group Installed-Size: 223 Depends: libcoro-perl (= 6.570-3+b4) Section: debug Priority: optional Description: debug symbols for libcoro-perl Build-Ids: 3a2f99fba4d32e16aeed7a6b1f3d7460246ff9b7 46374a23f8de12a1d1b29413423c3398f9285f7c a55d4f438138b6eebe56c7542e33a3d0880348a6 drwxr-xr-x root/root 0 2024-06-02 14:21 ./ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/debug/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/debug/.build-id/3a/ -rw-r--r-- root/root 15408 2024-06-02 14:21 ./usr/lib/debug/.build-id/3a/2f99fba4d32e16aeed7a6b1f3d7460246ff9b7.debug drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/debug/.build-id/46/ -rw-r--r-- root/root 152008 2024-06-02 14:21 ./usr/lib/debug/.build-id/46/374a23f8de12a1d1b29413423c3398f9285f7c.debug drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/debug/.build-id/a5/ -rw-r--r-- root/root 21104 2024-06-02 14:21 ./usr/lib/debug/.build-id/a5/5d4f438138b6eebe56c7542e33a3d0880348a6.debug drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/debug/.dwz/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/debug/.dwz/x86_64-linux-gnu/ -rw-r--r-- root/root 22632 2024-06-02 14:21 ./usr/lib/debug/.dwz/x86_64-linux-gnu/libcoro-perl.debug drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/share/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/share/doc/ lrwxrwxrwx root/root 0 2024-06-02 14:21 ./usr/share/doc/libcoro-perl-dbgsym -> libcoro-perl libcoro-perl_6.570-3+b4_amd64.deb --------------------------------- new Debian package, version 2.0. size 219784 bytes: control archive=2884 bytes. 1582 bytes, 31 lines control 5324 bytes, 67 lines md5sums Package: libcoro-perl Source: libcoro-perl (6.570-3) Version: 6.570-3+b4 Architecture: amd64 Maintainer: Debian Perl Group Installed-Size: 507 Depends: perl (>= 5.40.0~rc1-1), perlapi-5.40.0, libc6 (>= 2.34), libanyevent-perl, libcommon-sense-perl, libguard-perl Recommends: libev-perl, libevent-perl, libio-aio-perl, libnet-http-perl Section: perl Priority: optional Homepage: https://metacpan.org/release/Coro Description: Perl framework implementing coroutines Coro is a collection of modules which manages continuations in general, most often in the form of cooperative threads (also called coros, or simply "coro" in the documentation). They do not actually execute at the same time, even on machines with multiple processors. . The specific flavor of thread offered by this module also guarantees you that it will not switch between threads unless necessary. It switches at easily- identified points in your program, so locking and parallel access are rarely an issue, making threaded programming much safer and easier than using other threading models. . Coro provides a full shared address space, which makes communication between threads very easy. A parallel matrix multiplication benchmark runs over 300 times faster on a single core than perl's ithreads on a quad core using all four cores. . This version of Coro has been patched by the Debian Project to provide compatibility with Perl 5.22 and Perl 5.24. Please send bug reports to Debian () and not the original author. drwxr-xr-x root/root 0 2024-06-02 14:21 ./ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/ -rw-r--r-- root/root 45934 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro.pm drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/ -rw-r--r-- root/root 4936 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/AIO.pm -rw-r--r-- root/root 13601 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/AnyEvent.pm -rw-r--r-- root/root 1516 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/BDB.pm -rw-r--r-- root/root 4053 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Channel.pm -rw-r--r-- root/root 5222 2020-03-11 09:47 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/CoroAPI.h -rw-r--r-- root/root 16457 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Debug.pm -rw-r--r-- root/root 2618 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/EV.pm -rw-r--r-- root/root 5430 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Event.pm -rw-r--r-- root/root 13820 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Handle.pm -rw-r--r-- root/root 26831 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Intro.pod -rw-r--r-- root/root 4016 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/LWP.pm -rw-r--r-- root/root 3750 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/MakeMaker.pm -rw-r--r-- root/root 2311 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/RWLock.pm -rw-r--r-- root/root 3782 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Select.pm -rw-r--r-- root/root 4408 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Semaphore.pm -rw-r--r-- root/root 4197 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/SemaphoreSet.pm -rw-r--r-- root/root 2294 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Signal.pm -rw-r--r-- root/root 5471 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Socket.pm -rw-r--r-- root/root 1828 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Specific.pm -rw-r--r-- root/root 19435 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/State.pm -rw-r--r-- root/root 3764 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Storable.pm -rw-r--r-- root/root 1657 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Timer.pm -rw-r--r-- root/root 5567 2020-07-29 13:08 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/Util.pm -rwxr-xr-x root/root 2769 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/jit-amd64-unix.pl -rwxr-xr-x root/root 2977 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Coro/jit-x86-unix.pl drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/EV/ -rw-r--r-- root/root 18512 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/EV/EV.so drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/Event/ -rw-r--r-- root/root 14328 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/Event/Event.so drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/State/ -rw-r--r-- root/root 92608 2024-06-02 14:21 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Coro/State/State.so drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/share/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/share/doc/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/ -rw-r--r-- root/root 277 2005-03-03 17:20 ./usr/share/doc/libcoro-perl/README -rw-r--r-- root/root 1207 2008-03-02 16:10 ./usr/share/doc/libcoro-perl/README.linux-glibc -rw-r--r-- root/root 207 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/changelog.Debian.amd64.gz -rw-r--r-- root/root 846 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/changelog.Debian.gz -rw-r--r-- root/root 24968 2020-07-29 13:08 ./usr/share/doc/libcoro-perl/changelog.gz -rw-r--r-- root/root 6879 2022-10-13 15:29 ./usr/share/doc/libcoro-perl/copyright drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/examples/ -rw-r--r-- root/root 1714 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/examples/bench -rw-r--r-- root/root 316 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/examples/dns -rw-r--r-- root/root 1222 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/examples/event -rw-r--r-- root/root 526 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/examples/lwp -rw-r--r-- root/root 8492 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/examples/myhttpd -rw-r--r-- root/root 618 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/examples/prodcons1 -rw-r--r-- root/root 665 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/examples/prodcons2 -rw-r--r-- root/root 620 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/examples/prodcons3 -rw-r--r-- root/root 752 2024-06-02 14:21 ./usr/share/doc/libcoro-perl/examples/readline drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/share/man/ drwxr-xr-x root/root 0 2024-06-02 14:21 ./usr/share/man/man3/ -rw-r--r-- root/root 17383 2024-06-02 14:21 ./usr/share/man/man3/Coro.3pm.gz -rw-r--r-- root/root 2649 2024-06-02 14:21 ./usr/share/man/man3/Coro::AIO.3pm.gz -rw-r--r-- root/root 5179 2024-06-02 14:21 ./usr/share/man/man3/Coro::AnyEvent.3pm.gz -rw-r--r-- root/root 1462 2024-06-02 14:21 ./usr/share/man/man3/Coro::BDB.3pm.gz -rw-r--r-- root/root 2397 2024-06-02 14:21 ./usr/share/man/man3/Coro::Channel.3pm.gz -rw-r--r-- root/root 3634 2024-06-02 14:21 ./usr/share/man/man3/Coro::Debug.3pm.gz -rw-r--r-- root/root 1949 2024-06-02 14:21 ./usr/share/man/man3/Coro::EV.3pm.gz -rw-r--r-- root/root 2602 2024-06-02 14:21 ./usr/share/man/man3/Coro::Event.3pm.gz -rw-r--r-- root/root 3013 2024-06-02 14:21 ./usr/share/man/man3/Coro::Handle.3pm.gz -rw-r--r-- root/root 11341 2024-06-02 14:21 ./usr/share/man/man3/Coro::Intro.3pm.gz -rw-r--r-- root/root 2436 2024-06-02 14:21 ./usr/share/man/man3/Coro::LWP.3pm.gz -rw-r--r-- root/root 2237 2024-06-02 14:21 ./usr/share/man/man3/Coro::MakeMaker.3pm.gz -rw-r--r-- root/root 1475 2024-06-02 14:21 ./usr/share/man/man3/Coro::RWLock.3pm.gz -rw-r--r-- root/root 1934 2024-06-02 14:21 ./usr/share/man/man3/Coro::Select.3pm.gz -rw-r--r-- root/root 2418 2024-06-02 14:21 ./usr/share/man/man3/Coro::Semaphore.3pm.gz -rw-r--r-- root/root 1962 2024-06-02 14:21 ./usr/share/man/man3/Coro::SemaphoreSet.3pm.gz -rw-r--r-- root/root 1734 2024-06-02 14:21 ./usr/share/man/man3/Coro::Signal.3pm.gz -rw-r--r-- root/root 1933 2024-06-02 14:21 ./usr/share/man/man3/Coro::Socket.3pm.gz -rw-r--r-- root/root 1547 2024-06-02 14:21 ./usr/share/man/man3/Coro::Specific.3pm.gz -rw-r--r-- root/root 8591 2024-06-02 14:21 ./usr/share/man/man3/Coro::State.3pm.gz -rw-r--r-- root/root 1897 2024-06-02 14:21 ./usr/share/man/man3/Coro::Storable.3pm.gz -rw-r--r-- root/root 1421 2024-06-02 14:21 ./usr/share/man/man3/Coro::Timer.3pm.gz -rw-r--r-- root/root 2319 2024-06-02 14:21 ./usr/share/man/man3/Coro::Util.3pm.gz +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: any Build-Space: 5120 Build-Time: 10 Distribution: perl-5.40 Host Architecture: amd64 Install-Time: 6 Job: /srv/debomatic/incoming/libcoro-perl_6.570-3.dsc Machine Architecture: amd64 Package: libcoro-perl Package-Time: 27 Source-Version: 6.570-3 Space: 5120 Status: successful Version: 6.570-3+b4 -------------------------------------------------------------------------------- Finished at 2024-06-02T14:21:56Z Build needed 00:00:27, 5120k disk space