sbuild (Debian sbuild) 0.85.9 (29 May 2024) on carme.larted.org.uk +==============================================================================+ | libcompress-bzip2-perl 2.28-1+b6 (amd64) Sat, 01 Jun 2024 19:23:43 +0000 | +==============================================================================+ Package: libcompress-bzip2-perl Version: 2.28-1+b6 Source Version: 2.28-1 Distribution: perl-5.40 Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: any perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_GB:en", LC_ALL = (unset), LC_CTYPE = (unset), LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). I: NOTICE: Log filtering will replace 'var/run/schroot/mount/perl-5.40-amd64-debomatic-b8e68e98-5df6-4a15-a853-61731380e7d2' with '<>' +------------------------------------------------------------------------------+ | Chroot Setup Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libcompress-bzip2-perl_2.28-1 perl-5.40 amd64 -------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libcompress-bzip2-perl_2.28-1 perl-5.40 amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: NOTICE: Log filtering will replace 'build/libcompress-bzip2-perl-BgNlC1/resolver-6ZjLAm' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.40 InRelease [3033 B] Get:1 file:/srv/reprepro perl-5.40 InRelease [3033 B] Get:2 file:/srv/reprepro perl-5.40/main amd64 Packages [43.9 kB] Hit:3 http://localhost:3142/debian unstable InRelease Hit:4 http://localhost:3142/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/libcompress-bzip2-perl_2.28-1.dsc exists in /srv/debomatic/incoming; copying to chroot I: NOTICE: Log filtering will replace 'build/libcompress-bzip2-perl-BgNlC1/libcompress-bzip2-perl-2.28' with '<>' I: NOTICE: Log filtering will replace 'build/libcompress-bzip2-perl-BgNlC1' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: bzip2, debhelper-compat (= 13), libbz2-dev, libtest-pod-perl, perl-xs-dev, perl, build-essential, fakeroot Filtered Build-Depends: bzip2, debhelper-compat (= 13), libbz2-dev, libtest-pod-perl, perl-xs-dev, perl, build-essential, fakeroot dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [609 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [702 B] Get:5 copy:/<>/apt_archive ./ Packages [705 B] Fetched 2016 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libbz2-dev libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libperl-dev libpipeline1 libtest-pod-perl libtool libuchardet0 libxml2 m4 man-db po-debconf sensible-utils Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev groff libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx bzip2-doc libarchive-cpio-perl libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libbz2-dev libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libperl-dev libpipeline1 libtest-pod-perl libtool libuchardet0 libxml2 m4 man-db po-debconf sbuild-build-depends-main-dummy sensible-utils 0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded. Need to get 19.2 MB/20.3 MB of archives. After this operation, 79.5 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [916 B] Get:2 file:/srv/reprepro perl-5.40/main amd64 libperl-dev amd64 5.40.0~rc1-1 [1096 kB] Get:3 http://localhost:3142/debian unstable/main amd64 sensible-utils all 0.0.22 [22.4 kB] Get:4 http://localhost:3142/debian unstable/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get:5 http://localhost:3142/debian unstable/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get:6 http://localhost:3142/debian unstable/main amd64 file amd64 1:5.45-3 [42.9 kB] Get:7 http://localhost:3142/debian unstable/main amd64 gettext-base amd64 0.21-14+b1 [161 kB] Get:8 http://localhost:3142/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get:9 http://localhost:3142/debian unstable/main amd64 groff-base amd64 1.23.0-4 [1180 kB] Get:10 http://localhost:3142/debian unstable/main amd64 bsdextrautils amd64 2.40.1-4 [95.7 kB] Get:11 http://localhost:3142/debian unstable/main amd64 libpipeline1 amd64 1.5.7-2 [38.0 kB] Get:12 http://localhost:3142/debian unstable/main amd64 man-db amd64 2.12.1-1 [1411 kB] Get:13 http://localhost:3142/debian unstable/main amd64 m4 amd64 1.4.19-4 [287 kB] Get:14 http://localhost:3142/debian unstable/main amd64 autoconf all 2.71-3 [332 kB] Get:15 http://localhost:3142/debian unstable/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get:16 http://localhost:3142/debian unstable/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get:17 http://localhost:3142/debian unstable/main amd64 autopoint all 0.21-14 [496 kB] Get:18 http://localhost:3142/debian unstable/main amd64 libdebhelper-perl all 13.15.3 [88.0 kB] Get:19 http://localhost:3142/debian unstable/main amd64 libtool all 2.4.7-7 [517 kB] Get:20 http://localhost:3142/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get:21 http://localhost:3142/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:22 http://localhost:3142/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get:23 http://localhost:3142/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get:24 http://localhost:3142/debian unstable/main amd64 libelf1t64 amd64 0.191-1+b1 [189 kB] Get:25 http://localhost:3142/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get:26 http://localhost:3142/debian unstable/main amd64 libicu72 amd64 72.1-4+b1 [9395 kB] Get:27 http://localhost:3142/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg-2 [670 kB] Get:28 http://localhost:3142/debian unstable/main amd64 gettext amd64 0.21-14+b1 [1301 kB] Get:29 http://localhost:3142/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:30 http://localhost:3142/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get:31 http://localhost:3142/debian unstable/main amd64 debhelper all 13.15.3 [901 kB] Get:32 http://localhost:3142/debian unstable/main amd64 libfakeroot amd64 1.34-1 [28.9 kB] Get:33 http://localhost:3142/debian unstable/main amd64 fakeroot amd64 1.34-1 [74.0 kB] Get:34 http://localhost:3142/debian unstable/main amd64 libbz2-dev amd64 1.0.8-5.1 [31.3 kB] Get:35 http://localhost:3142/debian unstable/main amd64 libtest-pod-perl all 1.52-3 [12.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 19.2 MB in 0s (120 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 14743 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_amd64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_amd64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.1-4_amd64.deb ... Unpacking bsdextrautils (2.40.1-4) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.7-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-1_amd64.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.191-1+b1_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-4+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-4+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg-2_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg-2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.21-14+b1_amd64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libfakeroot:amd64. Preparing to unpack .../29-libfakeroot_1.34-1_amd64.deb ... Unpacking libfakeroot:amd64 (1.34-1) ... Selecting previously unselected package fakeroot. Preparing to unpack .../30-fakeroot_1.34-1_amd64.deb ... Unpacking fakeroot (1.34-1) ... Selecting previously unselected package libbz2-dev:amd64. Preparing to unpack .../31-libbz2-dev_1.0.8-5.1_amd64.deb ... Unpacking libbz2-dev:amd64 (1.0.8-5.1) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../32-libperl-dev_5.40.0~rc1-1_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.0~rc1-1) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../33-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../34-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.7-2) ... Setting up libicu72:amd64 (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-4) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up libtest-pod-perl (1.52-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:amd64 (5.40.0~rc1-1) ... Setting up file (1:5.45-3) ... Setting up libfakeroot:amd64 (1.34-1) ... Setting up libelf1t64:amd64 (0.191-1+b1) ... Setting up fakeroot (1.34-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libxml2:amd64 (2.12.7+dfsg-2) ... Setting up libbz2-dev:amd64 (1.0.8-5.1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-4) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.38-11) ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in any) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 6.1.0-21-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) amd64 (x86_64) Toolchain package versions: binutils_2.42-4 dpkg-dev_1.22.6 g++-13_13.2.0-25 gcc-13_13.2.0-25 libc6-dev_2.38-11 libstdc++-13-dev_13.2.0-25 libstdc++6_14.1.0-1 linux-libc-dev_6.8.11-1 Package versions: adduser_3.137 apt_2.9.4 autoconf_2.71-3 automake_1:1.16.5-1.3 autopoint_0.21-14 autotools-dev_20220109.1 base-files_13.2 base-passwd_3.6.3 bash_5.2.21-2+b1 binutils_2.42-4 binutils-common_2.42-4 binutils-x86-64-linux-gnu_2.42-4 bsdextrautils_2.40.1-4 bsdutils_1:2.40.1-4 build-essential_12.10 bzip2_1.0.8-5.1 coreutils_9.4-3.1 cpp_4:13.2.0-7 cpp-13_13.2.0-25 cpp-13-x86-64-linux-gnu_13.2.0-25 cpp-x86-64-linux-gnu_4:13.2.0-7 dash_0.5.12-8 debconf_1.5.86 debhelper_13.15.3 debian-archive-keyring_2023.4 debianutils_5.17 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffutils_1:3.10-1 dirmngr_2.2.43-7 dpkg_1.22.6 dpkg-dev_1.22.6 dwz_0.15-1+b1 eatmydata_131-2 fakeroot_1.34-1 file_1:5.45-3 findutils_4.9.0-6 g++_4:13.2.0-7 g++-13_13.2.0-25 g++-13-x86-64-linux-gnu_13.2.0-25 g++-x86-64-linux-gnu_4:13.2.0-7 gcc_4:13.2.0-7 gcc-13_13.2.0-25 gcc-13-base_13.2.0-25 gcc-13-x86-64-linux-gnu_13.2.0-25 gcc-14-base_14.1.0-1 gcc-x86-64-linux-gnu_4:13.2.0-7 gettext_0.21-14+b1 gettext-base_0.21-14+b1 gnupg_2.2.43-7 gnupg-l10n_2.2.43-7 gnupg-utils_2.2.43-7 gpg_2.2.43-7 gpg-agent_2.2.43-7 gpg-wks-client_2.2.43-7 gpgconf_2.2.43-7 gpgsm_2.2.43-7 gpgv_2.2.43-7 grep_3.11-4 groff-base_1.23.0-4 gzip_1.12-1.1 hostname_3.23+nmu2 init-system-helpers_1.66 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-2 libapt-pkg6.0t64_2.9.4 libarchive-zip-perl_1.68-1 libasan8_14.1.0-1 libassuan0_2.5.6-1+b1 libatomic1_14.1.0-1 libattr1_1:2.5.2-1 libaudit-common_1:3.1.2-2.1 libaudit1_1:3.1.2-2.1 libbinutils_2.42-4 libblkid1_2.40.1-4 libbz2-1.0_1.0.8-5.1 libbz2-dev_1.0.8-5.1 libc-bin_2.38-11 libc-dev-bin_2.38-11 libc6_2.38-11 libc6-dev_2.38-11 libcap-ng0_0.8.5-1 libcap2_1:2.66-5 libcc1-0_14.1.0-1 libcrypt-dev_1:4.4.36-4 libcrypt1_1:4.4.36-4 libctf-nobfd0_2.42-4 libctf0_2.42-4 libdb5.3t64_5.3.28+dfsg2-7 libdebconfclient0_0.272 libdebhelper-perl_13.15.3 libdpkg-perl_1.22.6 libeatmydata1_131-2 libelf1t64_0.191-1+b1 libfakeroot_1.34-1 libffi8_3.4.6-1 libfile-stripnondeterminism-perl_1.14.0-1 libgcc-13-dev_13.2.0-25 libgcc-s1_14.1.0-1 libgcrypt20_1.10.3-3 libgdbm-compat4t64_1.23-5.1+b1 libgdbm6t64_1.23-5.1+b1 libgmp10_2:6.3.0+dfsg-2+b1 libgnutls30t64_3.8.5-3 libgomp1_14.1.0-1 libgpg-error0_1.49-2 libgprofng0_2.42-4 libhogweed6t64_3.9.1-2.2 libhwasan0_14.1.0-1 libicu72_72.1-4+b1 libidn2-0_2.3.7-2 libisl23_0.26-3+b2 libitm1_14.1.0-1 libjansson4_2.14-2+b2 libksba8_1.6.6-1 libldap-2.5-0_2.5.17+dfsg-1 liblsan0_14.1.0-1 liblz4-1_1.9.4-2 liblzma5_5.6.1+really5.4.5-1 libmagic-mgc_1:5.45-3 libmagic1t64_1:5.45-3 libmd0_1.1.0-2 libmount1_2.40.1-4 libmpc3_1.3.1-1+b2 libmpfr6_4.2.1-1+b1 libncursesw6_6.5-2 libnettle8t64_3.9.1-2.2 libnpth0t64_1.6-3.1 libp11-kit0_0.25.3-5 libpam-modules_1.5.3-7 libpam-modules-bin_1.5.3-7 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7 libpcre2-8-0_10.42-4+b1 libperl-dev_5.40.0~rc1-1 libperl5.38t64_5.38.2-5 libperl5.40_5.40.0~rc1-1 libpipeline1_1.5.7-2 libquadmath0_14.1.0-1 libreadline8t64_8.2-4 libsasl2-2_2.1.28+dfsg1-6 libsasl2-modules-db_2.1.28+dfsg1-6 libseccomp2_2.5.5-1 libselinux1_3.5-2+b2 libsemanage-common_3.5-1 libsemanage2_3.5-1+b3 libsepol2_3.5-2+b1 libsframe1_2.42-4 libsmartcols1_2.40.1-4 libsqlite3-0_3.46.0-1 libssl3t64_3.2.1-3 libstdc++-13-dev_13.2.0-25 libstdc++6_14.1.0-1 libsystemd0_256~rc3-7 libtasn1-6_4.19.0-3+b2 libtest-pod-perl_1.52-3 libtinfo6_6.5-2 libtool_2.4.7-7 libtsan2_14.1.0-1 libubsan1_14.1.0-1 libuchardet0_0.0.8-1+b1 libudev1_256~rc3-7 libunistring5_1.2-1 libuuid1_2.40.1-4 libxml2_2.12.7+dfsg-2 libxxhash0_0.8.2-2+b1 libzstd1_1.5.5+dfsg2-2 linux-libc-dev_6.8.11-1 login_1:4.13+dfsg1-4 m4_1.4.19-4 make_4.3-4.1 man-db_2.12.1-1 mawk_1.3.4.20240123-1 ncurses-base_6.5-2 ncurses-bin_6.5-2 passwd_1:4.13+dfsg1-4 patch_2.7.6-7 perl_5.40.0~rc1-1 perl-base_5.40.0~rc1-1 perl-modules-5.38_5.38.2-5 perl-modules-5.40_5.40.0~rc1-1 pinentry-curses_1.2.1-3+b2 po-debconf_1.0.21+nmu1 readline-common_8.2-4 rpcsvc-proto_1.4.3-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2 sensible-utils_0.0.22 sysvinit-utils_3.09-1 tar_1.35+dfsg-3 usr-is-merged_39 util-linux_2.40.1-4 xz-utils_5.6.1+really5.4.5-1 zlib1g_1:1.3.dfsg+really1.3.1-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libcompress-bzip2-perl Binary: libcompress-bzip2-perl Architecture: any Version: 2.28-1 Maintainer: Debian Perl Group Uploaders: Xavier Guimard Homepage: https://metacpan.org/release/Compress-Bzip2 Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libcompress-bzip2-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libcompress-bzip2-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: bzip2 , debhelper-compat (= 13), libbz2-dev, libtest-pod-perl , perl-xs-dev, perl:native Package-List: libcompress-bzip2-perl deb perl optional arch=any Checksums-Sha1: 46144c6c326f7c3041fbe94136c4cc2adc88c08b 895637 libcompress-bzip2-perl_2.28.orig.tar.gz 8ac3e9bc50771f1a5ed0c00c335eae7438edce0d 4616 libcompress-bzip2-perl_2.28-1.debian.tar.xz Checksums-Sha256: 859f835c3f5c998810d8b2a6f9e282ff99d6cb66ccfa55cae7e66dafb035116e 895637 libcompress-bzip2-perl_2.28.orig.tar.gz 1d1df1b95630cb63b7700b51a16bc2cca4a02efba8e33d94bc21ac96d721f852 4616 libcompress-bzip2-perl_2.28-1.debian.tar.xz Files: 882ceb8bb025f32896b1f60c748c1374 895637 libcompress-bzip2-perl_2.28.orig.tar.gz 83e9886ea9ca398b9fff51da2d57aafa 4616 libcompress-bzip2-perl_2.28-1.debian.tar.xz Dgit: 852ff987f2c956c27ff66b36d35e7c57d40f1825 debian archive/debian/2.28-1 https://git.dgit.debian.org/libcompress-bzip2-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAl8Yau1fFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgaq/A//e5CjMGUL1KOjYeUy447c/xhW9DRtkVDU6i/oQAuDvbLTvF4T82qgChzA U3MMLIKhMFiV203yWycSnbteN4LJhLpgY9nS0HP2jpVt//20pbULQuHCiJ7ZkiNc I95zBPMpB/GqxJ1LvGqAoCQsTx/ZqOuF5UatuFfcog0nddlTEkUGSzTpbh6gfDDU sP9QGDVzjFjY5nLS6HdsUsnfdJLoKiwYq9a9ehueTed2fF3z4o67pNuvMYNSMWZV fkmtJ2YL/E7SrybZPwUE6fAXTUcXthRFX+iUL596Q4/8J5G5y5xDHMBwp2cTCOdo 0VKDyRWVpHMv+2YbL8RaZe2hYmdYSRw+rJgv/dMaNWuPBjWRgqRmXu3zTnjFbSUn x5TdUM2Ods4ltSvIrnzHuMN98heRIxuF0t9MzgT61hWiTNc2CTbEdvtOqx6q+zUH dyw33B4tGBgbYrSONFJB+XezdZvznL4AXXHAwOXO1fQtLGYJYz7z4AflnAav8ZXI 3LpxSFShZcxhTF3AyJh36wwxR8rG8/2bYs+4gEzF75IBBjr7pFfm706mYxorVtp5 nuj1wrFUWeD15rq/dIT7uHMWtiwRhLHVVwLi+LHGSFMKc54Ywthk5OefEW4lCPqG rzlx2ttXOcmhGS1OHogc7lIgEIp7So50j5I8O1mYaSy94i1Bjwo= =yvhg -----END PGP SIGNATURE----- gpgv: Signature made Wed Jul 22 16:35:57 2020 UTC gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libcompress-bzip2-perl_2.28-1.dsc: no acceptable signature found dpkg-source: info: extracting libcompress-bzip2-perl in /<> dpkg-source: info: unpacking libcompress-bzip2-perl_2.28.orig.tar.gz dpkg-source: info: unpacking libcompress-bzip2-perl_2.28-1.debian.tar.xz Check disk space ---------------- Sufficient free space for build Hack binNMU version ------------------- Created changelog entry for binNMU version 2.28-1+b6 +------------------------------------------------------------------------------+ | Starting Timed Build Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libcompress-bzip2-perl_2.28-1 perl-5.40 amd64 -------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libcompress-bzip2-perl_2.28-1 perl-5.40 amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANG=en_GB.UTF-8 LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=perl-5.40-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.40-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.40-amd64-debomatic-b8e68e98-5df6-4a15-a853-61731380e7d2 SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -mDebian Perl autobuilder -B -rfakeroot -Zxz dpkg-buildpackage: info: source package libcompress-bzip2-perl dpkg-buildpackage: info: source version 2.28-1+b6 dpkg-buildpackage: info: source distribution perl-5.40 dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary-arch dh binary-arch dh_update_autotools_config -a dh_autoreconf -a dh_auto_configure -a /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" Parsing config.in... found bzip2 1.0.8, 13-Jul-2019 installed Looks Good. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Compress::Bzip2 Writing MYMETA.yml and MYMETA.json dh_auto_build -a make -j2 make[1]: Entering directory '/<>' Running Mkbootstrap for Bzip2 () chmod 644 "Bzip2.bs" "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/<>/typemap' Bzip2.xs > Bzip2.xsc cp lib/Compress/Bzip2.pm blib/lib/Compress/Bzip2.pm AutoSplitting blib/lib/Compress/Bzip2.pm (blib/lib/auto/Compress/Bzip2) "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Bzip2.bs blib/arch/auto/Compress/Bzip2/Bzip2.bs 644 mv Bzip2.xsc Bzip2.c x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"2.28\" -DXS_VERSION=\"2.28\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" Bzip2.c Bzip2.xs: In function ‘XS_Compress__Bzip2_bzclose’: Bzip2.xs:2048:7: warning: ‘Perl_dowantarray’ is deprecated [-Wdeprecated-declarations] 2048 | if (GIMME == G_ARRAY) | ^~ In file included from /usr/lib/x86_64-linux-gnu/perl/5.40/CORE/perl.h:6186, from Bzip2.xs:4: /usr/lib/x86_64-linux-gnu/perl/5.40/CORE/proto.h:1031:1: note: declared here 1031 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ Bzip2.xs: In function ‘XS_Compress__Bzip2_bzflush’: Bzip2.xs:2111:7: warning: ‘Perl_dowantarray’ is deprecated [-Wdeprecated-declarations] 2111 | if (GIMME == G_ARRAY) | ^~ /usr/lib/x86_64-linux-gnu/perl/5.40/CORE/proto.h:1031:1: note: declared here 1031 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ Bzip2.xs: In function ‘XS_Compress__Bzip2_bzdeflateInit’: Bzip2.xs:2340:7: warning: ‘Perl_dowantarray’ is deprecated [-Wdeprecated-declarations] 2340 | if (GIMME == G_ARRAY) | ^~ /usr/lib/x86_64-linux-gnu/perl/5.40/CORE/proto.h:1031:1: note: declared here 1031 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ Bzip2.xs:2353:7: warning: ‘Perl_dowantarray’ is deprecated [-Wdeprecated-declarations] 2353 | if (GIMME == G_ARRAY) | ^~ /usr/lib/x86_64-linux-gnu/perl/5.40/CORE/proto.h:1031:1: note: declared here 1031 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ Bzip2.xs: In function ‘XS_Compress__Bzip2_bzdeflate’: Bzip2.xs:2455:5: warning: ‘Perl_dowantarray’ is deprecated [-Wdeprecated-declarations] 2455 | if (GIMME == G_ARRAY) | ^~ /usr/lib/x86_64-linux-gnu/perl/5.40/CORE/proto.h:1031:1: note: declared here 1031 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ Bzip2.xs: In function ‘XS_Compress__Bzip2_bzinflateInit’: Bzip2.xs:2486:7: warning: ‘Perl_dowantarray’ is deprecated [-Wdeprecated-declarations] 2486 | if (GIMME == G_ARRAY) | ^~ /usr/lib/x86_64-linux-gnu/perl/5.40/CORE/proto.h:1031:1: note: declared here 1031 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ Bzip2.xs:2500:5: warning: ‘Perl_dowantarray’ is deprecated [-Wdeprecated-declarations] 2500 | if (GIMME == G_ARRAY) | ^~ /usr/lib/x86_64-linux-gnu/perl/5.40/CORE/proto.h:1031:1: note: declared here 1031 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ Bzip2.xs: In function ‘XS_Compress__Bzip2_bzinflate’: Bzip2.xs:2561:5: warning: ‘Perl_dowantarray’ is deprecated [-Wdeprecated-declarations] 2561 | if (GIMME == G_ARRAY) | ^~ /usr/lib/x86_64-linux-gnu/perl/5.40/CORE/proto.h:1031:1: note: declared here 1031 | Perl_dowantarray(pTHX) | ^~~~~~~~~~~~~~~~ rm -f blib/arch/auto/Compress/Bzip2/Bzip2.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong -Wl,-E Bzip2.o -o blib/arch/auto/Compress/Bzip2/Bzip2.so \ -lbz2 \ chmod 755 blib/arch/auto/Compress/Bzip2/Bzip2.so Manifying 1 pod document make[1]: Leaving directory '/<>' dh_auto_test -a make -j2 test TEST_VERBOSE=1 make[1]: Entering directory '/<>' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Bzip2.bs blib/arch/auto/Compress/Bzip2/Bzip2.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/010-useability.t ............ 1..3 ok 1 - use Compress::Bzip2; ok 2 - constants imported ok ok 3 - bzlib version is 1.0.8, 13-Jul-2019 ok t/011-prototype.t ............. 1..9 ok 1 - use Compress::Bzip2; ok 2 - bzopen prototype ok ok 3 - bzopen t/011-tmp-sample.bz2 successful ok 4 - bzsetparams prototype ok ok 5 - bzwrite prototype $$$ ok ok 6 - bzwrite prototype $$ ok ok 7 - 193 blocks were read, 98696 bytes ok 8 - bzclose prototype ok ok 9 - file was closed 0 OK (0) ok t/020-compfile.t .............. 1..5 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 4 blocks were read, 2027 bytes ok 4 - file was closed 0 OK (0) ok 5 - no differences with reference ok t/021-compfile.t .............. 1..7 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 193 blocks were read, 98696 bytes ok 4 - file was closed 0 OK (0) ok 5 - no differences with reference ok 6 - cpan \#36246 do not shortcut compressing a 0-byte file ok 7 - filesize > 0 ok t/022-compfile.t .............. 1..5 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 415 blocks were read, 212340 bytes ok 4 - file was closed 0 OK (0) ok 5 - no differences with reference ok t/023-compfile.t .............. 1..5 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 235 blocks were read, 120244 bytes ok 4 - file was closed 0 OK (0) ok 5 - no differences with reference ok t/024-compfile.t .............. 1..5 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 2075 blocks were read, 1061700 bytes, in 5 loops ok 4 - file was closed 0 OK (0) ok 5 - no differences with reference ok t/025-compfile.t .............. 1..12 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 4 data was written, 2027 bytes ok 4 - flush test of write file, res=0 ok 5 - file was closed 0 OK (0) ok 6 - something was read in, 2027 bytes ok 7 - flush wrote out something, 983 bytes ok 8 - something was written out, 994 bytes ok 9 - file trailer written by bzclose ok 10 - total_in should be 2027, is 2027 ok 11 - total_out should be 994, is 994 ok 12 - no differences with reference ok t/026-compfile.t .............. 1..12 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 415 data was written, 212340 bytes ok 4 - flush test of write file, res=0 ok 5 - file was closed 0 OK (0) ok 6 - something was read in, 212340 bytes ok 7 - flush wrote out something, 78724 bytes ok 8 - something was written out, 78736 bytes ok 9 - file trailer written by bzclose ok 10 - total_in should be 212340, is 212340 ok 11 - total_out should be 78736, is 78736 ok 12 - no differences with reference ok t/030-uncompfile.t ............ 1..5 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 4 data was written, 2027 bytes ok 4 - file was closed 0 OK (0) ok 5 - no differences with decompressing $INFILE ok t/031-uncompfile.t ............ 1..5 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 193 data was written, 98696 bytes ok 4 - file was closed 0 OK (0) ok 5 - no differences with decompressing $INFILE ok t/032-uncompfile.t ............ 1..7 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - not at EOF ok 4 - at EOF ok 5 - 415 data was written, 212340 bytes ok 6 - file was closed 0 OK (0) ok 7 - no differences with decompressing $INFILE ok t/033-uncompfile.t ............ 1..5 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 235 data was written, 120244 bytes ok 4 - file was closed 0 OK (0) ok 5 - no differences with decompressing bzlib-src/sample3.bz2 ok t/034-uncompfile.t ............ 1..5 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 2121 blocks were read, 1085656 bytes ok 4 - file was closed 0 OK (0) ok 5 - no differences with decompressing bzlib-src/sample1.ref times 11 ok t/035-uncompreadline.t ........ ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 4 blocks were written, 2027 bytes ok 4 - file was closed 0 OK (0) ok 5 - no differences with decompressing $INFILE ok 6 - readline open was successful ok 7 - readline linecount is 39, should be 39 ok 8 - readline maximum line length is 78, should be 78 ok 9 - readline minimum line length is 0, should be 0 ok 10 - readline first line is 'That's great, it starts with an earthquake, birds and snakes, an aeroplane -', should be 'That's great, it starts with an earthquake, birds and snakes, an aeroplane -' ok 11 - readline last line is '(It's time I had some time alone)', should be '(It's time I had some time alone)' 1..11 ok t/040-memory.t ................ 1..15 ok 1 - use Compress::Bzip2; ok 2 - compressed starts with bzip magic header ok 3 - string was not inouted ok 4 - string compression - 133 vs 131 ok 5 - uncompressed is same as the original ok 6 - x10 string was not inouted ok 7 - x10 string compression - 209 vs 1310 ok 8 - x10 uncompressed is same as the original ok 9 - bzip1 string was not inouted ok 10 - bzip1 string compression - 133 vs 131 ok 11 - bzip1 decompress is same as the original ok 12 - sample0 uncompressed w/o header ok 13 ok 14 - sample0 uncompressed w/ header ok 15 ok t/041-double-free.t ........... 1..1 ok 1 - use Compress::Bzip2; a ok Warning: unable to close filehandle $out properly: Bad file descriptor at t/041-error.t line 63. t/041-error.t ................. 1..9 ok 1 - use Compress::Bzip2; ok 2 - object created in spite of error ok 3 - error is set 'PARAM_ERROR' vs 'PARAM_ERROR (-2)' ok 4 - after bzclearerr, error is not set '' vs 'PARAM_ERROR (-2)' ok 5 - bzopen with file handle instead of file ok 6 - file was closed 0 OK (0) ok 7 - no differences with bzlib-src/sample0.bz2 reference ok 8 - open failed ok 9 - error set, is 'IO_ERROR' 'IO_ERROR (-6): 13 Permission denied' ok t/050-deflate.t ............... 1..4 ok 1 - use Compress::Bzip2; ok 2 - bzdeflateInit was successful ok 3 - 416 blocks read, 212340 bytes in, 73732 bytes out ok 4 - no differences with stream compressing bzlib-src/sample2.ref ok t/051-deflate-flush.t ......... 1..5 ok 1 - use Compress::Bzip2; ok 2 - bzdeflateInit was successful ok 3 - 416 blocks read, 212340 bytes in, 83213 bytes out ok 4 - successful flushes at 50,000 - 4 ok 5 - no differences with 50k stream compressing bzlib-src/sample2.ref ok t/060-inflate.t ............... 1..5 ok 1 - use Compress::Bzip2; ok 2 - bzinflateInit was successful ok 3 - bzclose was successful ok 4 - 145 blocks read, 73732 bytes in, 212340 bytes out ok 5 - no differences with decompressing $INFILE ok t/070-gzcomp.t ................ 1..5 ok 1 - use Compress::Bzip2; ok 2 - gzopen was successful ok 3 - 4 blocks were read, 2027 bytes ok 4 - file was closed 0 OK (0) ok 5 - no differences with reference ok t/071-gzuncomp.t .............. 1..5 ok 1 - use Compress::Bzip2; ok 2 - open was successful ok 3 - 4 data was written, 2027 bytes ok 4 - file was closed 0 OK (0) ok 5 - no differences with decompressing $INFILE ok t/080-version.t ............... 1..3 ok 1 - use Compress::Bzip2; ok 2 - module version 2.28 ok 3 - library version 1.0.8, 13-Jul-2019 ok t/081-basic.t ................. 1..208 ok 1 - empty string ok 2 - undef fails ok 3 - alphanumerics ok 4 - FOO ok 5 - bar ok 6 - spaces ok 7 - reference tests ok 8 - 100 random strings ok 9 - long string 1 ok 10 - long string 2 ok 11 - long string 3 ok 12 - long string 4 ok 13 - long string 5 ok 14 - long string 6 ok 15 - long string 7 ok 16 - long string 8 ok 17 - long string 9 ok 18 - long string 10 ok 19 - long string 11 ok 20 - long string 12 ok 21 - long string 13 ok 22 - long string 14 ok 23 - long string 15 ok 24 - long string 16 ok 25 - long string 17 ok 26 - long string 18 ok 27 - long string 19 ok 28 - long string 20 ok 29 - long string 21 ok 30 - long string 22 ok 31 - long string 23 ok 32 - long string 24 ok 33 - long string 25 ok 34 - long string 26 ok 35 - long string 27 ok 36 - long string 28 ok 37 - long string 29 ok 38 - long string 30 ok 39 - long string 31 ok 40 - long string 32 ok 41 - long string 33 ok 42 - long string 34 ok 43 - long string 35 ok 44 - long string 36 ok 45 - long string 37 ok 46 - long string 38 ok 47 - long string 39 ok 48 - long string 40 ok 49 - long string 41 ok 50 - long string 42 ok 51 - long string 43 ok 52 - long string 44 ok 53 - long string 45 ok 54 - long string 46 ok 55 - long string 47 ok 56 - long string 48 ok 57 - long string 49 ok 58 - long string 50 ok 59 - long string 51 ok 60 - long string 52 ok 61 - long string 53 ok 62 - long string 54 ok 63 - long string 55 ok 64 - long string 56 ok 65 - long string 57 ok 66 - long string 58 ok 67 - long string 59 ok 68 - long string 60 ok 69 - long string 61 ok 70 - long string 62 ok 71 - long string 63 ok 72 - long string 64 ok 73 - long string 65 ok 74 - long string 66 ok 75 - long string 67 ok 76 - long string 68 ok 77 - long string 69 ok 78 - long string 70 ok 79 - long string 71 ok 80 - long string 72 ok 81 - long string 73 ok 82 - long string 74 ok 83 - long string 75 ok 84 - long string 76 ok 85 - long string 77 ok 86 - long string 78 ok 87 - long string 79 ok 88 - long string 80 ok 89 - long string 81 ok 90 - long string 82 ok 91 - long string 83 ok 92 - long string 84 ok 93 - long string 85 ok 94 - long string 86 ok 95 - long string 87 ok 96 - long string 88 ok 97 - long string 89 ok 98 - long string 90 ok 99 - long string 91 ok 100 - long string 92 ok 101 - long string 93 ok 102 - long string 94 ok 103 - long string 95 ok 104 - long string 96 ok 105 - long string 97 ok 106 - long string 98 ok 107 - long string 99 ok 108 - long string 100 ok 109 - binary string 1 ok 110 - binary string 2 ok 111 - binary string 3 ok 112 - binary string 4 ok 113 - binary string 5 ok 114 - binary string 6 ok 115 - binary string 7 ok 116 - binary string 8 ok 117 - binary string 9 ok 118 - binary string 10 ok 119 - binary string 11 ok 120 - binary string 12 ok 121 - binary string 13 ok 122 - binary string 14 ok 123 - binary string 15 ok 124 - binary string 16 ok 125 - binary string 17 ok 126 - binary string 18 ok 127 - binary string 19 ok 128 - binary string 20 ok 129 - binary string 21 ok 130 - binary string 22 ok 131 - binary string 23 ok 132 - binary string 24 ok 133 - binary string 25 ok 134 - binary string 26 ok 135 - binary string 27 ok 136 - binary string 28 ok 137 - binary string 29 ok 138 - binary string 30 ok 139 - binary string 31 ok 140 - binary string 32 ok 141 - binary string 33 ok 142 - binary string 34 ok 143 - binary string 35 ok 144 - binary string 36 ok 145 - binary string 37 ok 146 - binary string 38 ok 147 - binary string 39 ok 148 - binary string 40 ok 149 - binary string 41 ok 150 - binary string 42 ok 151 - binary string 43 ok 152 - binary string 44 ok 153 - binary string 45 ok 154 - binary string 46 ok 155 - binary string 47 ok 156 - binary string 48 ok 157 - binary string 49 ok 158 - binary string 50 ok 159 - binary string 51 ok 160 - binary string 52 ok 161 - binary string 53 ok 162 - binary string 54 ok 163 - binary string 55 ok 164 - binary string 56 ok 165 - binary string 57 ok 166 - binary string 58 ok 167 - binary string 59 ok 168 - binary string 60 ok 169 - binary string 61 ok 170 - binary string 62 ok 171 - binary string 63 ok 172 - binary string 64 ok 173 - binary string 65 ok 174 - binary string 66 ok 175 - binary string 67 ok 176 - binary string 68 ok 177 - binary string 69 ok 178 - binary string 70 ok 179 - binary string 71 ok 180 - binary string 72 ok 181 - binary string 73 ok 182 - binary string 74 ok 183 - binary string 75 ok 184 - binary string 76 ok 185 - binary string 77 ok 186 - binary string 78 ok 187 - binary string 79 ok 188 - binary string 80 ok 189 - binary string 81 ok 190 - binary string 82 ok 191 - binary string 83 ok 192 - binary string 84 ok 193 - binary string 85 ok 194 - binary string 86 ok 195 - binary string 87 ok 196 - binary string 88 ok 197 - binary string 89 ok 198 - binary string 90 ok 199 - binary string 91 ok 200 - binary string 92 ok 201 - binary string 93 ok 202 - binary string 94 ok 203 - binary string 95 ok 204 - binary string 96 ok 205 - binary string 97 ok 206 - binary string 98 ok 207 - binary string 99 ok 208 - binary string 100 ok t/082-stream.t ................ 1..208 ok 1 - empty string ok 2 - undef ok 3 - alphanumerics ok 4 - FOO ok 5 - bar ok 6 - spaces ok 7 - reference tests ok 8 - 100 random strings ok 9 - long string 1 ok 10 - long string 2 ok 11 - long string 3 ok 12 - long string 4 ok 13 - long string 5 ok 14 - long string 6 ok 15 - long string 7 ok 16 - long string 8 ok 17 - long string 9 ok 18 - long string 10 ok 19 - long string 11 ok 20 - long string 12 ok 21 - long string 13 ok 22 - long string 14 ok 23 - long string 15 ok 24 - long string 16 ok 25 - long string 17 ok 26 - long string 18 ok 27 - long string 19 ok 28 - long string 20 ok 29 - long string 21 ok 30 - long string 22 ok 31 - long string 23 ok 32 - long string 24 ok 33 - long string 25 ok 34 - long string 26 ok 35 - long string 27 ok 36 - long string 28 ok 37 - long string 29 ok 38 - long string 30 ok 39 - long string 31 ok 40 - long string 32 ok 41 - long string 33 ok 42 - long string 34 ok 43 - long string 35 ok 44 - long string 36 ok 45 - long string 37 ok 46 - long string 38 ok 47 - long string 39 ok 48 - long string 40 ok 49 - long string 41 ok 50 - long string 42 ok 51 - long string 43 ok 52 - long string 44 ok 53 - long string 45 ok 54 - long string 46 ok 55 - long string 47 ok 56 - long string 48 ok 57 - long string 49 ok 58 - long string 50 ok 59 - long string 51 ok 60 - long string 52 ok 61 - long string 53 ok 62 - long string 54 ok 63 - long string 55 ok 64 - long string 56 ok 65 - long string 57 ok 66 - long string 58 ok 67 - long string 59 ok 68 - long string 60 ok 69 - long string 61 ok 70 - long string 62 ok 71 - long string 63 ok 72 - long string 64 ok 73 - long string 65 ok 74 - long string 66 ok 75 - long string 67 ok 76 - long string 68 ok 77 - long string 69 ok 78 - long string 70 ok 79 - long string 71 ok 80 - long string 72 ok 81 - long string 73 ok 82 - long string 74 ok 83 - long string 75 ok 84 - long string 76 ok 85 - long string 77 ok 86 - long string 78 ok 87 - long string 79 ok 88 - long string 80 ok 89 - long string 81 ok 90 - long string 82 ok 91 - long string 83 ok 92 - long string 84 ok 93 - long string 85 ok 94 - long string 86 ok 95 - long string 87 ok 96 - long string 88 ok 97 - long string 89 ok 98 - long string 90 ok 99 - long string 91 ok 100 - long string 92 ok 101 - long string 93 ok 102 - long string 94 ok 103 - long string 95 ok 104 - long string 96 ok 105 - long string 97 ok 106 - long string 98 ok 107 - long string 99 ok 108 - long string 100 ok 109 - binary string 1 ok 110 - binary string 2 ok 111 - binary string 3 ok 112 - binary string 4 ok 113 - binary string 5 ok 114 - binary string 6 ok 115 - binary string 7 ok 116 - binary string 8 ok 117 - binary string 9 ok 118 - binary string 10 ok 119 - binary string 11 ok 120 - binary string 12 ok 121 - binary string 13 ok 122 - binary string 14 ok 123 - binary string 15 ok 124 - binary string 16 ok 125 - binary string 17 ok 126 - binary string 18 ok 127 - binary string 19 ok 128 - binary string 20 ok 129 - binary string 21 ok 130 - binary string 22 ok 131 - binary string 23 ok 132 - binary string 24 ok 133 - binary string 25 ok 134 - binary string 26 ok 135 - binary string 27 ok 136 - binary string 28 ok 137 - binary string 29 ok 138 - binary string 30 ok 139 - binary string 31 ok 140 - binary string 32 ok 141 - binary string 33 ok 142 - binary string 34 ok 143 - binary string 35 ok 144 - binary string 36 ok 145 - binary string 37 ok 146 - binary string 38 ok 147 - binary string 39 ok 148 - binary string 40 ok 149 - binary string 41 ok 150 - binary string 42 ok 151 - binary string 43 ok 152 - binary string 44 ok 153 - binary string 45 ok 154 - binary string 46 ok 155 - binary string 47 ok 156 - binary string 48 ok 157 - binary string 49 ok 158 - binary string 50 ok 159 - binary string 51 ok 160 - binary string 52 ok 161 - binary string 53 ok 162 - binary string 54 ok 163 - binary string 55 ok 164 - binary string 56 ok 165 - binary string 57 ok 166 - binary string 58 ok 167 - binary string 59 ok 168 - binary string 60 ok 169 - binary string 61 ok 170 - binary string 62 ok 171 - binary string 63 ok 172 - binary string 64 ok 173 - binary string 65 ok 174 - binary string 66 ok 175 - binary string 67 ok 176 - binary string 68 ok 177 - binary string 69 ok 178 - binary string 70 ok 179 - binary string 71 ok 180 - binary string 72 ok 181 - binary string 73 ok 182 - binary string 74 ok 183 - binary string 75 ok 184 - binary string 76 ok 185 - binary string 77 ok 186 - binary string 78 ok 187 - binary string 79 ok 188 - binary string 80 ok 189 - binary string 81 ok 190 - binary string 82 ok 191 - binary string 83 ok 192 - binary string 84 ok 193 - binary string 85 ok 194 - binary string 86 ok 195 - binary string 87 ok 196 - binary string 88 ok 197 - binary string 89 ok 198 - binary string 90 ok 199 - binary string 91 ok 200 - binary string 92 ok 201 - binary string 93 ok 202 - binary string 94 ok 203 - binary string 95 ok 204 - binary string 96 ok 205 - binary string 97 ok 206 - binary string 98 ok 207 - binary string 99 ok 208 - binary string 100 ok t/900_kwalitee.t .............. skipped: This test is only run for the module author t/900_leaktrace.t ............. skipped: require Test::LeakTrace t/900_meta.t .................. skipped: This test is only run for the module author t/900_perl_minimum_version.t .. skipped: Author tests not required for installation t/900_pod-coverage.t .......... skipped: This test is only run for the module author t/900_pod.t ................... 1..1 ok 1 - POD test for blib/lib/Compress/Bzip2.pm ok All tests successful. Files=32, Tests=570, 7 wallclock secs ( 0.12 usr 0.04 sys + 4.12 cusr 0.76 csys = 5.04 CPU) Result: PASS make[1]: Leaving directory '/<>' create-stamp debian/debhelper-build-stamp dh_prep -a dh_auto_install --destdir=debian/libcompress-bzip2-perl/ -a make -j2 install DESTDIR=/<>/debian/libcompress-bzip2-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/<>' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Bzip2.bs blib/arch/auto/Compress/Bzip2/Bzip2.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /<>/debian/libcompress-bzip2-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Compress/Bzip2/Bzip2.so Installing /<>/debian/libcompress-bzip2-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/Compress/Bzip2.pm Installing /<>/debian/libcompress-bzip2-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Compress/Bzip2/autosplit.ix Installing /<>/debian/libcompress-bzip2-perl/usr/share/man/man3/Compress::Bzip2.3pm make[1]: Leaving directory '/<>' dh_installdocs -a dh_installchangelogs -a dh_installman -a dh_perl -a dh_link -a dh_strip_nondeterminism -a dh_compress -a dh_fixperms -a dh_missing -a dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb -a dh_gencontrol -a dh_md5sums -a dh_builddeb -a dpkg-deb: building package 'libcompress-bzip2-perl' in '../libcompress-bzip2-perl_2.28-1+b6_amd64.deb'. dpkg-deb: building package 'libcompress-bzip2-perl-dbgsym' in '../libcompress-bzip2-perl-dbgsym_2.28-1+b6_amd64.deb'. dpkg-genbuildinfo --build=any -O../libcompress-bzip2-perl_2.28-1+b6_amd64.buildinfo dpkg-genchanges --build=any -mDebian Perl autobuilder -O../libcompress-bzip2-perl_2.28-1+b6_amd64.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source -Zxz --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2024-06-01T19:24:08Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ libcompress-bzip2-perl_2.28-1+b6_amd64.changes: ----------------------------------------------- Format: 1.8 Date: Sat, 01 Jun 2024 19:23:55 +0000 Source: libcompress-bzip2-perl (2.28-1) Binary: libcompress-bzip2-perl libcompress-bzip2-perl-dbgsym Binary-Only: yes Architecture: amd64 Version: 2.28-1+b6 Distribution: perl-5.40 Urgency: low Maintainer: Debian Perl autobuilder Changed-By: Debian Perl autobuilder Description: libcompress-bzip2-perl - Perl interface to Bzip2 compression library Changes: libcompress-bzip2-perl (2.28-1+b6) perl-5.40; urgency=low, binary-only=yes . * Binary-only non-maintainer upload for amd64; no source changes. * Rebuild for Perl 5.40 Checksums-Sha1: 72e682855fe02fbdb9a7c01716672b536a62554d 76372 libcompress-bzip2-perl-dbgsym_2.28-1+b6_amd64.deb 615d464aa5dfd4f94fd536298202cb838632444f 5483 libcompress-bzip2-perl_2.28-1+b6_amd64.buildinfo b1cdceee216dced014939aa0ab1580edf9e10676 52512 libcompress-bzip2-perl_2.28-1+b6_amd64.deb Checksums-Sha256: a671fe65ecb1c7f1f80078b7a5b21868fd11372fe4d07554a637f0415113b62e 76372 libcompress-bzip2-perl-dbgsym_2.28-1+b6_amd64.deb 68ef270283c7b0bd21b16b83297d465e4a85f14d4abf02a3ae184823bca33f40 5483 libcompress-bzip2-perl_2.28-1+b6_amd64.buildinfo 7146b2c7af6c2062911a4305df0db711cda750f28aefbfe3f3269c90e8224e66 52512 libcompress-bzip2-perl_2.28-1+b6_amd64.deb Files: cc001bfe6b6ed3b80fdf5f982fe9c13b 76372 debug optional libcompress-bzip2-perl-dbgsym_2.28-1+b6_amd64.deb 537fd9580233f1902e404b34fb829475 5483 perl optional libcompress-bzip2-perl_2.28-1+b6_amd64.buildinfo c9e6f2105c5a902038a9a0abb35462e9 52512 perl optional libcompress-bzip2-perl_2.28-1+b6_amd64.deb +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: libcompress-bzip2-perl (2.28-1) Binary: libcompress-bzip2-perl libcompress-bzip2-perl-dbgsym Architecture: amd64 Version: 2.28-1+b6 Binary-Only-Changes: libcompress-bzip2-perl (2.28-1+b6) perl-5.40; urgency=low, binary-only=yes . * Binary-only non-maintainer upload for amd64; no source changes. * Rebuild for Perl 5.40 . -- Debian Perl autobuilder Sat, 01 Jun 2024 19:23:55 +0000 Checksums-Md5: cc001bfe6b6ed3b80fdf5f982fe9c13b 76372 libcompress-bzip2-perl-dbgsym_2.28-1+b6_amd64.deb c9e6f2105c5a902038a9a0abb35462e9 52512 libcompress-bzip2-perl_2.28-1+b6_amd64.deb Checksums-Sha1: 72e682855fe02fbdb9a7c01716672b536a62554d 76372 libcompress-bzip2-perl-dbgsym_2.28-1+b6_amd64.deb b1cdceee216dced014939aa0ab1580edf9e10676 52512 libcompress-bzip2-perl_2.28-1+b6_amd64.deb Checksums-Sha256: a671fe65ecb1c7f1f80078b7a5b21868fd11372fe4d07554a637f0415113b62e 76372 libcompress-bzip2-perl-dbgsym_2.28-1+b6_amd64.deb 7146b2c7af6c2062911a4305df0db711cda750f28aefbfe3f3269c90e8224e66 52512 libcompress-bzip2-perl_2.28-1+b6_amd64.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Sat, 01 Jun 2024 19:24:08 +0000 Build-Path: /<> Build-Tainted-By: merged-usr-via-aliased-dirs usr-local-has-programs Installed-Build-Depends: autoconf (= 2.71-3), automake (= 1:1.16.5-1.3), autopoint (= 0.21-14), autotools-dev (= 20220109.1), base-files (= 13.2), base-passwd (= 3.6.3), bash (= 5.2.21-2+b1), binutils (= 2.42-4), binutils-common (= 2.42-4), binutils-x86-64-linux-gnu (= 2.42-4), bsdextrautils (= 2.40.1-4), bsdutils (= 1:2.40.1-4), build-essential (= 12.10), bzip2 (= 1.0.8-5.1), coreutils (= 9.4-3.1), cpp (= 4:13.2.0-7), cpp-13 (= 13.2.0-25), cpp-13-x86-64-linux-gnu (= 13.2.0-25), cpp-x86-64-linux-gnu (= 4:13.2.0-7), dash (= 0.5.12-8), debconf (= 1.5.86), debhelper (= 13.15.3), debianutils (= 5.17), dh-autoreconf (= 20), dh-strip-nondeterminism (= 1.14.0-1), diffutils (= 1:3.10-1), dpkg (= 1.22.6), dpkg-dev (= 1.22.6), dwz (= 0.15-1+b1), file (= 1:5.45-3), findutils (= 4.9.0-6), g++ (= 4:13.2.0-7), g++-13 (= 13.2.0-25), g++-13-x86-64-linux-gnu (= 13.2.0-25), g++-x86-64-linux-gnu (= 4:13.2.0-7), gcc (= 4:13.2.0-7), gcc-13 (= 13.2.0-25), gcc-13-base (= 13.2.0-25), gcc-13-x86-64-linux-gnu (= 13.2.0-25), gcc-14-base (= 14.1.0-1), gcc-x86-64-linux-gnu (= 4:13.2.0-7), gettext (= 0.21-14+b1), gettext-base (= 0.21-14+b1), grep (= 3.11-4), groff-base (= 1.23.0-4), gzip (= 1.12-1.1), hostname (= 3.23+nmu2), init-system-helpers (= 1.66), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.3.2-2), libarchive-zip-perl (= 1.68-1), libasan8 (= 14.1.0-1), libatomic1 (= 14.1.0-1), libattr1 (= 1:2.5.2-1), libaudit-common (= 1:3.1.2-2.1), libaudit1 (= 1:3.1.2-2.1), libbinutils (= 2.42-4), libblkid1 (= 2.40.1-4), libbz2-1.0 (= 1.0.8-5.1), libbz2-dev (= 1.0.8-5.1), libc-bin (= 2.38-11), libc-dev-bin (= 2.38-11), libc6 (= 2.38-11), libc6-dev (= 2.38-11), libcap-ng0 (= 0.8.5-1), libcap2 (= 1:2.66-5), libcc1-0 (= 14.1.0-1), libcrypt-dev (= 1:4.4.36-4), libcrypt1 (= 1:4.4.36-4), libctf-nobfd0 (= 2.42-4), libctf0 (= 2.42-4), libdb5.3t64 (= 5.3.28+dfsg2-7), libdebconfclient0 (= 0.272), libdebhelper-perl (= 13.15.3), libdpkg-perl (= 1.22.6), libelf1t64 (= 0.191-1+b1), libfile-stripnondeterminism-perl (= 1.14.0-1), libgcc-13-dev (= 13.2.0-25), libgcc-s1 (= 14.1.0-1), libgdbm-compat4t64 (= 1.23-5.1+b1), libgdbm6t64 (= 1.23-5.1+b1), libgmp10 (= 2:6.3.0+dfsg-2+b1), libgomp1 (= 14.1.0-1), libgprofng0 (= 2.42-4), libhwasan0 (= 14.1.0-1), libicu72 (= 72.1-4+b1), libisl23 (= 0.26-3+b2), libitm1 (= 14.1.0-1), libjansson4 (= 2.14-2+b2), liblsan0 (= 14.1.0-1), liblzma5 (= 5.6.1+really5.4.5-1), libmagic-mgc (= 1:5.45-3), libmagic1t64 (= 1:5.45-3), libmd0 (= 1.1.0-2), libmount1 (= 2.40.1-4), libmpc3 (= 1.3.1-1+b2), libmpfr6 (= 4.2.1-1+b1), libpam-modules (= 1.5.3-7), libpam-modules-bin (= 1.5.3-7), libpam-runtime (= 1.5.3-7), libpam0g (= 1.5.3-7), libpcre2-8-0 (= 10.42-4+b1), libperl-dev (= 5.40.0~rc1-1), libperl5.40 (= 5.40.0~rc1-1), libpipeline1 (= 1.5.7-2), libquadmath0 (= 14.1.0-1), libseccomp2 (= 2.5.5-1), libselinux1 (= 3.5-2+b2), libsframe1 (= 2.42-4), libsmartcols1 (= 2.40.1-4), libssl3t64 (= 3.2.1-3), libstdc++-13-dev (= 13.2.0-25), libstdc++6 (= 14.1.0-1), libsystemd0 (= 256~rc3-7), libtest-pod-perl (= 1.52-3), libtinfo6 (= 6.5-2), libtool (= 2.4.7-7), libtsan2 (= 14.1.0-1), libubsan1 (= 14.1.0-1), libuchardet0 (= 0.0.8-1+b1), libudev1 (= 256~rc3-7), libunistring5 (= 1.2-1), libuuid1 (= 2.40.1-4), libxml2 (= 2.12.7+dfsg-2), libzstd1 (= 1.5.5+dfsg2-2), linux-libc-dev (= 6.8.11-1), login (= 1:4.13+dfsg1-4), m4 (= 1.4.19-4), make (= 4.3-4.1), man-db (= 2.12.1-1), mawk (= 1.3.4.20240123-1), ncurses-base (= 6.5-2), ncurses-bin (= 6.5-2), patch (= 2.7.6-7), perl (= 5.40.0~rc1-1), perl-base (= 5.40.0~rc1-1), perl-modules-5.40 (= 5.40.0~rc1-1), po-debconf (= 1.0.21+nmu1), rpcsvc-proto (= 1.4.3-1), sed (= 4.9-2), sensible-utils (= 0.0.22), sysvinit-utils (= 3.09-1), tar (= 1.35+dfsg-3), usr-is-merged (= 39), util-linux (= 2.40.1-4), xz-utils (= 5.6.1+really5.4.5-1), zlib1g (= 1:1.3.dfsg+really1.3.1-1) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="en_GB.UTF-8" LC_ALL="C.UTF-8" LC_COLLATE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" SOURCE_DATE_EPOCH="1717269835" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libcompress-bzip2-perl-dbgsym_2.28-1+b6_amd64.deb ------------------------------------------------- new Debian package, version 2.0. size 76372 bytes: control archive=548 bytes. 434 bytes, 12 lines control 106 bytes, 1 lines md5sums Package: libcompress-bzip2-perl-dbgsym Source: libcompress-bzip2-perl (2.28-1) Version: 2.28-1+b6 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian Perl Group Installed-Size: 91 Depends: libcompress-bzip2-perl (= 2.28-1+b6) Section: debug Priority: optional Description: debug symbols for libcompress-bzip2-perl Build-Ids: d5f9fcaf37010d013d8e5ffe440059a8bf32b4c3 drwxr-xr-x root/root 0 2024-06-01 19:23 ./ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/lib/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/lib/debug/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/lib/debug/.build-id/d5/ -rw-r--r-- root/root 82096 2024-06-01 19:23 ./usr/lib/debug/.build-id/d5/f9fcaf37010d013d8e5ffe440059a8bf32b4c3.debug drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/share/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/share/doc/ lrwxrwxrwx root/root 0 2024-06-01 19:23 ./usr/share/doc/libcompress-bzip2-perl-dbgsym -> libcompress-bzip2-perl libcompress-bzip2-perl_2.28-1+b6_amd64.deb ------------------------------------------ new Debian package, version 2.0. size 52512 bytes: control archive=1088 bytes. 843 bytes, 19 lines control 959 bytes, 11 lines md5sums Package: libcompress-bzip2-perl Source: libcompress-bzip2-perl (2.28-1) Version: 2.28-1+b6 Architecture: amd64 Maintainer: Debian Perl Group Installed-Size: 145 Depends: perl (>= 5.40.0~rc1-1), perlapi-5.40.0, libbz2-1.0, libc6 (>= 2.4) Recommends: libcompress-raw-bzip2-perl (>= 2.094), libio-compress-perl (>= 2.094) Section: perl Priority: optional Homepage: https://metacpan.org/release/Compress-Bzip2 Description: Perl interface to Bzip2 compression library The Compress::Bzip2 module provides a Perl interface to the Bzip2 compression library, a relevant subset of the functionality provided by Bzip2 is available in Compress::Bzip2. . The module can be split into two general areas of functionality, namely in-memory compression/decompression and read/write access to bzip2 files. drwxr-xr-x root/root 0 2024-06-01 19:23 ./ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/lib/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/lib/x86_64-linux-gnu/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/lib/x86_64-linux-gnu/perl5/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/lib/x86_64-linux-gnu/perl5/5.40/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Compress/ -rw-r--r-- root/root 39876 2020-07-18 06:05 ./usr/lib/x86_64-linux-gnu/perl5/5.40/Compress/Bzip2.pm drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Compress/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Compress/Bzip2/ -rw-r--r-- root/root 63400 2024-06-01 19:23 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Compress/Bzip2/Bzip2.so -rw-r--r-- root/root 93 2024-06-01 19:23 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/Compress/Bzip2/autosplit.ix drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/share/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/share/doc/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/share/doc/libcompress-bzip2-perl/ -rw-r--r-- root/root 1674 2013-03-25 22:22 ./usr/share/doc/libcompress-bzip2-perl/ANNOUNCE -rw-r--r-- root/root 278 2013-03-25 22:22 ./usr/share/doc/libcompress-bzip2-perl/NEWS.gz -rw-r--r-- root/root 2745 2015-01-15 09:28 ./usr/share/doc/libcompress-bzip2-perl/README.md -rw-r--r-- root/root 215 2024-06-01 19:23 ./usr/share/doc/libcompress-bzip2-perl/changelog.Debian.amd64.gz -rw-r--r-- root/root 1070 2024-06-01 19:23 ./usr/share/doc/libcompress-bzip2-perl/changelog.Debian.gz -rw-r--r-- root/root 3762 2020-07-18 06:05 ./usr/share/doc/libcompress-bzip2-perl/changelog.gz -rw-r--r-- root/root 3127 2020-07-22 16:32 ./usr/share/doc/libcompress-bzip2-perl/copyright drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/share/man/ drwxr-xr-x root/root 0 2024-06-01 19:23 ./usr/share/man/man3/ -rw-r--r-- root/root 9957 2024-06-01 19:23 ./usr/share/man/man3/Compress::Bzip2.3pm.gz +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: any Build-Space: 9224 Build-Time: 12 Distribution: perl-5.40 Host Architecture: amd64 Install-Time: 6 Job: /srv/debomatic/incoming/libcompress-bzip2-perl_2.28-1.dsc Machine Architecture: amd64 Package: libcompress-bzip2-perl Package-Time: 25 Source-Version: 2.28-1 Space: 9224 Status: successful Version: 2.28-1+b6 -------------------------------------------------------------------------------- Finished at 2024-06-01T19:24:08Z Build needed 00:00:25, 9224k disk space