sbuild (Debian sbuild) 0.85.9 (29 May 2024) on carme.larted.org.uk +==============================================================================+ | libbackuppc-xs-perl 0.62-2+b5 (amd64) Sat, 01 Jun 2024 19:17:26 +0000 | +==============================================================================+ Package: libbackuppc-xs-perl Version: 0.62-2+b5 Source Version: 0.62-2 Distribution: perl-5.40 Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: any perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_GB:en", LC_ALL = (unset), LC_CTYPE = (unset), LC_NUMERIC = (unset), LC_COLLATE = (unset), LC_TIME = (unset), LC_MESSAGES = (unset), LC_MONETARY = (unset), LC_ADDRESS = (unset), LC_IDENTIFICATION = (unset), LC_MEASUREMENT = (unset), LC_PAPER = (unset), LC_TELEPHONE = (unset), LC_NAME = (unset), LANG = "en_GB.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). I: NOTICE: Log filtering will replace 'var/run/schroot/mount/perl-5.40-amd64-debomatic-8dc1b66c-4ed1-4245-8a17-e75c8300d4cf' with '<>' +------------------------------------------------------------------------------+ | Chroot Setup Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libbackuppc-xs-perl_0.62-2 perl-5.40 amd64 ----------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libbackuppc-xs-perl_0.62-2 perl-5.40 amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: NOTICE: Log filtering will replace 'build/libbackuppc-xs-perl-sbDNDW/resolver-Lqr97X' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.40 InRelease [3033 B] Get:1 file:/srv/reprepro perl-5.40 InRelease [3033 B] Get:2 file:/srv/reprepro perl-5.40/main amd64 Packages [34.1 kB] Hit:3 http://localhost:3142/debian unstable InRelease Hit:4 http://localhost:3142/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/libbackuppc-xs-perl_0.62-2.dsc exists in /srv/debomatic/incoming; copying to chroot I: NOTICE: Log filtering will replace 'build/libbackuppc-xs-perl-sbDNDW/libbackuppc-xs-perl-0.62' with '<>' I: NOTICE: Log filtering will replace 'build/libbackuppc-xs-perl-sbDNDW' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 13), perl-xs-dev, zlib1g-dev, build-essential, fakeroot Filtered Build-Depends: debhelper-compat (= 13), perl-xs-dev, zlib1g-dev, build-essential, fakeroot dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [609 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [642 B] Get:5 copy:/<>/apt_archive ./ Packages [674 B] Fetched 1925 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libperl-dev libpipeline1 libtool libuchardet0 libxml2 m4 man-db po-debconf sensible-utils zlib1g-dev Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev groff libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libarchive-cpio-perl libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libperl-dev libpipeline1 libtool libuchardet0 libxml2 m4 man-db po-debconf sbuild-build-depends-main-dummy sensible-utils zlib1g-dev 0 upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 20.0 MB/21.1 MB of archives. After this operation, 80.7 MB of additional disk space will be used. Get:1 file:/srv/reprepro perl-5.40/main amd64 libperl-dev amd64 5.40.0~rc1-1 [1096 kB] Get:2 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [896 B] Get:3 http://localhost:3142/debian unstable/main amd64 sensible-utils all 0.0.22 [22.4 kB] Get:4 http://localhost:3142/debian unstable/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get:5 http://localhost:3142/debian unstable/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get:6 http://localhost:3142/debian unstable/main amd64 file amd64 1:5.45-3 [42.9 kB] Get:7 http://localhost:3142/debian unstable/main amd64 gettext-base amd64 0.21-14+b1 [161 kB] Get:8 http://localhost:3142/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get:9 http://localhost:3142/debian unstable/main amd64 groff-base amd64 1.23.0-4 [1180 kB] Get:10 http://localhost:3142/debian unstable/main amd64 bsdextrautils amd64 2.40.1-4 [95.7 kB] Get:11 http://localhost:3142/debian unstable/main amd64 libpipeline1 amd64 1.5.7-2 [38.0 kB] Get:12 http://localhost:3142/debian unstable/main amd64 man-db amd64 2.12.1-1 [1411 kB] Get:13 http://localhost:3142/debian unstable/main amd64 m4 amd64 1.4.19-4 [287 kB] Get:14 http://localhost:3142/debian unstable/main amd64 autoconf all 2.71-3 [332 kB] Get:15 http://localhost:3142/debian unstable/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get:16 http://localhost:3142/debian unstable/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get:17 http://localhost:3142/debian unstable/main amd64 autopoint all 0.21-14 [496 kB] Get:18 http://localhost:3142/debian unstable/main amd64 libdebhelper-perl all 13.15.3 [88.0 kB] Get:19 http://localhost:3142/debian unstable/main amd64 libtool all 2.4.7-7 [517 kB] Get:20 http://localhost:3142/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get:21 http://localhost:3142/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:22 http://localhost:3142/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get:23 http://localhost:3142/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get:24 http://localhost:3142/debian unstable/main amd64 libelf1t64 amd64 0.191-1+b1 [189 kB] Get:25 http://localhost:3142/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get:26 http://localhost:3142/debian unstable/main amd64 libicu72 amd64 72.1-4+b1 [9395 kB] Get:27 http://localhost:3142/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg-2 [670 kB] Get:28 http://localhost:3142/debian unstable/main amd64 gettext amd64 0.21-14+b1 [1301 kB] Get:29 http://localhost:3142/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:30 http://localhost:3142/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get:31 http://localhost:3142/debian unstable/main amd64 debhelper all 13.15.3 [901 kB] Get:32 http://localhost:3142/debian unstable/main amd64 libfakeroot amd64 1.34-1 [28.9 kB] Get:33 http://localhost:3142/debian unstable/main amd64 fakeroot amd64 1.34-1 [74.0 kB] Get:34 http://localhost:3142/debian unstable/main amd64 zlib1g-dev amd64 1:1.3.dfsg+really1.3.1-1 [919 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 20.0 MB in 0s (149 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 14743 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.22_all.deb ... Unpacking sensible-utils (0.0.22) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-14+b1_amd64.deb ... Unpacking gettext-base (0.21-14+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-4_amd64.deb ... Unpacking groff-base (1.23.0-4) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.1-4_amd64.deb ... Unpacking bsdextrautils (2.40.1-4) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.7-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-1_amd64.deb ... Unpacking man-db (2.12.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-14_all.deb ... Unpacking autopoint (0.21-14) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.15.3_all.deb ... Unpacking libdebhelper-perl (13.15.3) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.191-1+b1_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-1+b1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-4+b1_amd64.deb ... Unpacking libicu72:amd64 (72.1-4+b1) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg-2_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg-2) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.21-14+b1_amd64.deb ... Unpacking gettext (0.21-14+b1) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.15.3_all.deb ... Unpacking debhelper (13.15.3) ... Selecting previously unselected package libfakeroot:amd64. Preparing to unpack .../29-libfakeroot_1.34-1_amd64.deb ... Unpacking libfakeroot:amd64 (1.34-1) ... Selecting previously unselected package fakeroot. Preparing to unpack .../30-fakeroot_1.34-1_amd64.deb ... Unpacking fakeroot (1.34-1) ... Selecting previously unselected package libperl-dev:amd64. Preparing to unpack .../31-libperl-dev_5.40.0~rc1-1_amd64.deb ... Unpacking libperl-dev:amd64 (5.40.0~rc1-1) ... Selecting previously unselected package zlib1g-dev:amd64. Preparing to unpack .../32-zlib1g-dev_1%3a1.3.dfsg+really1.3.1-1_amd64.deb ... Unpacking zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.1-1) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../33-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.7-2) ... Setting up libicu72:amd64 (72.1-4+b1) ... Setting up bsdextrautils (2.40.1-4) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.15.3) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up gettext-base (0.21-14+b1) ... Setting up m4 (1.4.19-4) ... Setting up libperl-dev:amd64 (5.40.0~rc1-1) ... Setting up file (1:5.45-3) ... Setting up libfakeroot:amd64 (1.34-1) ... Setting up libelf1t64:amd64 (0.191-1+b1) ... Setting up fakeroot (1.34-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-14) ... Setting up autoconf (2.71-3) ... Setting up zlib1g-dev:amd64 (1:1.3.dfsg+really1.3.1-1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.22) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libxml2:amd64 (2.12.7+dfsg-2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.21-14+b1) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-4) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.15.3) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.38-11) ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in any) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 6.1.0-21-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) amd64 (x86_64) Toolchain package versions: binutils_2.42-4 dpkg-dev_1.22.6 g++-13_13.2.0-25 gcc-13_13.2.0-25 libc6-dev_2.38-11 libstdc++-13-dev_13.2.0-25 libstdc++6_14.1.0-1 linux-libc-dev_6.8.11-1 Package versions: adduser_3.137 apt_2.9.4 autoconf_2.71-3 automake_1:1.16.5-1.3 autopoint_0.21-14 autotools-dev_20220109.1 base-files_13.2 base-passwd_3.6.3 bash_5.2.21-2+b1 binutils_2.42-4 binutils-common_2.42-4 binutils-x86-64-linux-gnu_2.42-4 bsdextrautils_2.40.1-4 bsdutils_1:2.40.1-4 build-essential_12.10 bzip2_1.0.8-5.1 coreutils_9.4-3.1 cpp_4:13.2.0-7 cpp-13_13.2.0-25 cpp-13-x86-64-linux-gnu_13.2.0-25 cpp-x86-64-linux-gnu_4:13.2.0-7 dash_0.5.12-8 debconf_1.5.86 debhelper_13.15.3 debian-archive-keyring_2023.4 debianutils_5.17 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffutils_1:3.10-1 dirmngr_2.2.43-7 dpkg_1.22.6 dpkg-dev_1.22.6 dwz_0.15-1+b1 eatmydata_131-2 fakeroot_1.34-1 file_1:5.45-3 findutils_4.9.0-6 g++_4:13.2.0-7 g++-13_13.2.0-25 g++-13-x86-64-linux-gnu_13.2.0-25 g++-x86-64-linux-gnu_4:13.2.0-7 gcc_4:13.2.0-7 gcc-13_13.2.0-25 gcc-13-base_13.2.0-25 gcc-13-x86-64-linux-gnu_13.2.0-25 gcc-14-base_14.1.0-1 gcc-x86-64-linux-gnu_4:13.2.0-7 gettext_0.21-14+b1 gettext-base_0.21-14+b1 gnupg_2.2.43-7 gnupg-l10n_2.2.43-7 gnupg-utils_2.2.43-7 gpg_2.2.43-7 gpg-agent_2.2.43-7 gpg-wks-client_2.2.43-7 gpgconf_2.2.43-7 gpgsm_2.2.43-7 gpgv_2.2.43-7 grep_3.11-4 groff-base_1.23.0-4 gzip_1.12-1.1 hostname_3.23+nmu2 init-system-helpers_1.66 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-2 libapt-pkg6.0t64_2.9.4 libarchive-zip-perl_1.68-1 libasan8_14.1.0-1 libassuan0_2.5.6-1+b1 libatomic1_14.1.0-1 libattr1_1:2.5.2-1 libaudit-common_1:3.1.2-2.1 libaudit1_1:3.1.2-2.1 libbinutils_2.42-4 libblkid1_2.40.1-4 libbz2-1.0_1.0.8-5.1 libc-bin_2.38-11 libc-dev-bin_2.38-11 libc6_2.38-11 libc6-dev_2.38-11 libcap-ng0_0.8.5-1 libcap2_1:2.66-5 libcc1-0_14.1.0-1 libcrypt-dev_1:4.4.36-4 libcrypt1_1:4.4.36-4 libctf-nobfd0_2.42-4 libctf0_2.42-4 libdb5.3t64_5.3.28+dfsg2-7 libdebconfclient0_0.272 libdebhelper-perl_13.15.3 libdpkg-perl_1.22.6 libeatmydata1_131-2 libelf1t64_0.191-1+b1 libfakeroot_1.34-1 libffi8_3.4.6-1 libfile-stripnondeterminism-perl_1.14.0-1 libgcc-13-dev_13.2.0-25 libgcc-s1_14.1.0-1 libgcrypt20_1.10.3-3 libgdbm-compat4t64_1.23-5.1+b1 libgdbm6t64_1.23-5.1+b1 libgmp10_2:6.3.0+dfsg-2+b1 libgnutls30t64_3.8.5-3 libgomp1_14.1.0-1 libgpg-error0_1.49-2 libgprofng0_2.42-4 libhogweed6t64_3.9.1-2.2 libhwasan0_14.1.0-1 libicu72_72.1-4+b1 libidn2-0_2.3.7-2 libisl23_0.26-3+b2 libitm1_14.1.0-1 libjansson4_2.14-2+b2 libksba8_1.6.6-1 libldap-2.5-0_2.5.17+dfsg-1 liblsan0_14.1.0-1 liblz4-1_1.9.4-2 liblzma5_5.6.1+really5.4.5-1 libmagic-mgc_1:5.45-3 libmagic1t64_1:5.45-3 libmd0_1.1.0-2 libmount1_2.40.1-4 libmpc3_1.3.1-1+b2 libmpfr6_4.2.1-1+b1 libncursesw6_6.5-2 libnettle8t64_3.9.1-2.2 libnpth0t64_1.6-3.1 libp11-kit0_0.25.3-5 libpam-modules_1.5.3-7 libpam-modules-bin_1.5.3-7 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7 libpcre2-8-0_10.42-4+b1 libperl-dev_5.40.0~rc1-1 libperl5.38t64_5.38.2-5 libperl5.40_5.40.0~rc1-1 libpipeline1_1.5.7-2 libquadmath0_14.1.0-1 libreadline8t64_8.2-4 libsasl2-2_2.1.28+dfsg1-6 libsasl2-modules-db_2.1.28+dfsg1-6 libseccomp2_2.5.5-1 libselinux1_3.5-2+b2 libsemanage-common_3.5-1 libsemanage2_3.5-1+b3 libsepol2_3.5-2+b1 libsframe1_2.42-4 libsmartcols1_2.40.1-4 libsqlite3-0_3.46.0-1 libssl3t64_3.2.1-3 libstdc++-13-dev_13.2.0-25 libstdc++6_14.1.0-1 libsystemd0_256~rc3-7 libtasn1-6_4.19.0-3+b2 libtinfo6_6.5-2 libtool_2.4.7-7 libtsan2_14.1.0-1 libubsan1_14.1.0-1 libuchardet0_0.0.8-1+b1 libudev1_256~rc3-7 libunistring5_1.2-1 libuuid1_2.40.1-4 libxml2_2.12.7+dfsg-2 libxxhash0_0.8.2-2+b1 libzstd1_1.5.5+dfsg2-2 linux-libc-dev_6.8.11-1 login_1:4.13+dfsg1-4 m4_1.4.19-4 make_4.3-4.1 man-db_2.12.1-1 mawk_1.3.4.20240123-1 ncurses-base_6.5-2 ncurses-bin_6.5-2 passwd_1:4.13+dfsg1-4 patch_2.7.6-7 perl_5.40.0~rc1-1 perl-base_5.40.0~rc1-1 perl-modules-5.38_5.38.2-5 perl-modules-5.40_5.40.0~rc1-1 pinentry-curses_1.2.1-3+b2 po-debconf_1.0.21+nmu1 readline-common_8.2-4 rpcsvc-proto_1.4.3-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2 sensible-utils_0.0.22 sysvinit-utils_3.09-1 tar_1.35+dfsg-3 usr-is-merged_39 util-linux_2.40.1-4 xz-utils_5.6.1+really5.4.5-1 zlib1g_1:1.3.dfsg+really1.3.1-1 zlib1g-dev_1:1.3.dfsg+really1.3.1-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libbackuppc-xs-perl Binary: libbackuppc-xs-perl Architecture: any Version: 0.62-2 Maintainer: Debian BackupPC Team Uploaders: Axel Beckert , Tobias Frost Homepage: https://github.com/backuppc/backuppc-xs Standards-Version: 4.6.0 Vcs-Browser: https://salsa.debian.org/debian/libbackuppc-xs-perl Vcs-Git: https://salsa.debian.org/debian/libbackuppc-xs-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), perl-xs-dev, zlib1g-dev Package-List: libbackuppc-xs-perl deb perl optional arch=any Checksums-Sha1: abc0dd6275ccb27aab9cb71db98f5690719a65bb 289549 libbackuppc-xs-perl_0.62.orig.tar.gz 2a97e0f7afbbbef67065e958fa99e1fed3f8225c 4448 libbackuppc-xs-perl_0.62-2.debian.tar.xz Checksums-Sha256: 94d863083a466558f82f10b1b95db7742ea99ebce808214f20897b343dc32b18 289549 libbackuppc-xs-perl_0.62.orig.tar.gz a47e541ed1f070a96b5f66c0f50ac6323143d570e03ca6f0ae5d8a9218bbfe35 4448 libbackuppc-xs-perl_0.62-2.debian.tar.xz Files: d3aa7f6405f8ed96e8e2f6282e861439 289549 libbackuppc-xs-perl_0.62.orig.tar.gz 841d5b2489a1f84d80df4fa7fcac8cfb 4448 libbackuppc-xs-perl_0.62-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEERoyJeTtCmBnp12Ema+Zjx1o1yXUFAmEgEQEACgkQa+Zjx1o1 yXW1Ug/+NaL9O1Cy8VCy8XYiAyCcmUgyUIfN2PGsh8VB02F1sAO2p39AD4z+IgWs GXdKFF/TrkO/yiwsPOBrgT4y5KL9FTRm3gUea6M6N12PpKaEPN8U1yoW5Gw8Jl31 z5jDDT3nXlwo/HSyI1Vvjln2GMNVjWJCgKoOoVyN6cfBKu7F+lEr6i9LrPINIo3Q CROF7lLTpU/NzWcxwzk/h3Fq1f/63VQmEYg3Zpc6fFLXLJXF7PHfFIoifEgZn23B 4LZqf0NU6D5rKVBrikvYsc18bBOaev0xE/t6/URU8/5hbCshNSkx0iYCnjmQ5S5P 5Seqnfwflz6+5JsbZAiTRToNXA3Y+ifEUjy3xqte3UyR3tHzPxHsI9ZDcCk0QLmO 8Df+TbQyOxJWmAM3vmGo/8TkTGI1JLKdxYxxxgSCvv6s/DWlmoDc9GV4HJmMYh+R JPyNj0k587Gn9CH/ZWlbijyVrGsowFQ9fPxi2TCNOOTBf0MTY6AVQi03SswpG1X/ NcSqkr6gHse+3mjmS+qM9v6BkYBlFXQW9CTGPlPGEATy8JSgyTZGghkY8uKleGMR iFeuKBoOHIVMlwwIxl3LLJDHEatw2EQZwbcftE1wu4Ids5U6HgklAbkZS/mKH3dE zf0X8rYJO7CsPtcmKP/n6sNzimKPiH1ddiccIGNyTeSVPCvzbXU= =j/c0 -----END PGP SIGNATURE----- gpgv: Signature made Fri Aug 20 20:30:57 2021 UTC gpgv: using RSA key 468C89793B429819E9D761266BE663C75A35C975 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libbackuppc-xs-perl_0.62-2.dsc: no acceptable signature found dpkg-source: info: extracting libbackuppc-xs-perl in /<> dpkg-source: info: unpacking libbackuppc-xs-perl_0.62.orig.tar.gz dpkg-source: info: unpacking libbackuppc-xs-perl_0.62-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying build-with-system-zlib.patch dpkg-source: info: applying MAXPATHLEN.patch Check disk space ---------------- Sufficient free space for build Hack binNMU version ------------------- Created changelog entry for binNMU version 0.62-2+b5 +------------------------------------------------------------------------------+ | Starting Timed Build Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libbackuppc-xs-perl_0.62-2 perl-5.40 amd64 ----------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libbackuppc-xs-perl_0.62-2 perl-5.40 amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANG=en_GB.UTF-8 LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=perl-5.40-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.40-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.40-amd64-debomatic-8dc1b66c-4ed1-4245-8a17-e75c8300d4cf SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -mDebian Perl autobuilder -B -rfakeroot -Zxz dpkg-buildpackage: info: source package libbackuppc-xs-perl dpkg-buildpackage: info: source version 0.62-2+b5 dpkg-buildpackage: info: source distribution perl-5.40 dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean debian/rules binary-arch dh binary-arch dh_update_autotools_config -a cp: warning: behavior of -n is non-portable and may change in future; use --update=none instead cp: warning: behavior of -n is non-portable and may change in future; use --update=none instead dh_autoreconf -a dh_auto_configure -a /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now" Checking if your kit is complete... Looks good Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for BackupPC::XS Writing MYMETA.yml and MYMETA.json dh_auto_build -a make -j2 make[1]: Entering directory '/<>' ./configure.sh cp lib/BackupPC/XS.pm blib/lib/BackupPC/XS.pm Running Mkbootstrap for XS () chmod 644 "XS.bs" "/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.40/ExtUtils/typemap' -typemap '/<>/typemap' BackupPC_XS.xs > BackupPC_XS.xsc mv BackupPC_XS.xsc BackupPC_XS.c "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- XS.bs blib/arch/auto/BackupPC/XS/XS.bs 644 configure.sh: Configuring backuppc-xs 0.62 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking whether to include debugging symbols... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for a BSD-compatible install... /usr/bin/install -c checking for gcc option to accept ISO C99... none needed checking for gcc option to accept ISO Standard C... (cached) none needed checking for remsh... 0 checking for yodl2man... 0 checking the group for user "nobody"... nogroup checking for broken largefile support... no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking ipv6 stack type... linux-glibc checking for library containing getaddrinfo... none required checking whether to call shutdown on all sockets... no checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking whether byte ordering is bigendian... no checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking whether time.h and sys/time.h may both be included... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking sys/fcntl.h usability... yes checking sys/fcntl.h presence... yes checking for sys/fcntl.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/unistd.h usability... yes checking sys/unistd.h presence... yes checking for sys/unistd.h... yes checking for unistd.h... (cached) yes checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking grp.h usability... yes checking grp.h presence... yes checking for grp.h... yes checking compat.h usability... no checking compat.h presence... no checking for compat.h... no checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking for sys/wait.h... (cached) yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/filio.h usability... no checking sys/filio.h presence... no checking for sys/filio.h... no checking for string.h... (cached) yes checking for stdlib.h... (cached) yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/mode.h usability... no checking sys/mode.h presence... no checking for sys/mode.h... no checking sys/un.h usability... yes checking sys/un.h presence... yes checking for sys/un.h... yes checking sys/attr.h usability... no checking sys/attr.h presence... no checking for sys/attr.h... no checking mcheck.h usability... yes checking mcheck.h presence... yes checking for mcheck.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking arpa/nameser.h usability... yes checking arpa/nameser.h presence... yes checking for arpa/nameser.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking float.h usability... yes checking float.h presence... yes checking for float.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking iconv.h usability... yes checking iconv.h presence... yes checking for iconv.h... yes checking libcharset.h usability... no checking libcharset.h presence... no checking for libcharset.h... no checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking sys/acl.h usability... no checking sys/acl.h presence... no checking for sys/acl.h... no checking acl/libacl.h usability... no checking acl/libacl.h presence... no checking for acl/libacl.h... no checking attr/xattr.h usability... no checking attr/xattr.h presence... no checking for attr/xattr.h... no checking sys/xattr.h usability... yes checking sys/xattr.h presence... yes checking for sys/xattr.h... yes checking sys/extattr.h usability... no checking sys/extattr.h presence... no checking for sys/extattr.h... no checking popt.h usability... no checking popt.h presence... no checking for popt.h... no checking popt/popt.h usability... no checking popt/popt.h presence... no checking for popt/popt.h... no checking netinet/in_systm.h usability... yes checking netinet/in_systm.h presence... yes checking for netinet/in_systm.h... yes checking netinet/ip.h usability... yes checking netinet/ip.h presence... yes checking for netinet/ip.h... yes checking whether sys/types.h defines makedev... no checking sys/mkdev.h usability... no checking sys/mkdev.h presence... no checking for sys/mkdev.h... no checking sys/sysmacros.h usability... yes checking sys/sysmacros.h presence... yes checking for sys/sysmacros.h... yes checking if makedev takes 3 args... no checking size of int... 4 checking size of long... 8 checking size of long long... 8 checking size of short... 2 checking size of int16_t... 2 checking size of uint16_t... 2 checking size of int32_t... 4 checking size of uint32_t... 4 checking size of int64_t... 8 checking size of off_t... 8 checking size of off64_t... 8 checking size of time_t... 8 checking for inline... inline checking for long double with more range or precision than double... yes checking return type of signal handlers... void checking for uid_t in sys/types.h... yes checking for mode_t... yes checking for off_t... yes checking for size_t... yes checking for pid_t... yes checking for id_t... yes checking type of array argument to getgroups... gid_t checking for struct stat.st_rdev... yes checking for socklen_t... yes checking for errno in errno.h... yes checking for connect... yes checking for library containing inet_ntop... none required checking for library containing iconv_open... none required checking for library containing libiconv_open... no checking for iconv declaration... extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); checking for inet_ntop... yes checking for inet_pton... yes checking for struct addrinfo... yes checking for struct sockaddr_storage... yes checking whether defines needed by getaddrinfo exist... yes checking for getaddrinfo... yes checking for struct sockaddr.sa_len... no checking for struct sockaddr_in.sin_len... no checking for struct sockaddr_un.sun_len... no checking for struct sockaddr_in6.sin6_scope_id... yes checking for struct stat64... yes checking for strcasecmp... yes checking for aclsort... no checking for aclsort in -lsec... no checking for utime.h... (cached) yes checking whether utime accepts a null argument... yes checking for size_t... (cached) yes checking for working alloca.h... yes checking for alloca... yes checking for waitpid... yes checking for wait4... yes checking for getcwd... yes checking for strdup... yes checking for chown... yes checking for chmod... yes checking for lchmod... yes checking for mknod... yes checking for mkfifo... yes checking for fchmod... yes checking for fstat... yes checking for ftruncate... yes checking for strchr... yes checking for readlink... yes checking for link... yes checking for utime... yes checking for utimes... yes checking for lutimes... yes checking for strftime... yes checking for memmove... yes checking for lchown... yes checking for vsnprintf... yes checking for snprintf... yes checking for vasprintf... yes checking for asprintf... yes checking for setsid... yes checking for strpbrk... yes checking for strlcat... yes checking for strlcpy... yes checking for strtol... yes checking for mallinfo... yes checking for getgroups... yes checking for setgroups... yes checking for geteuid... yes checking for getegid... yes checking for setlocale... yes checking for setmode... no checking for open64... yes checking for lseek64... yes checking for mkstemp64... yes checking for mtrace... yes checking for va_copy... no checking for __va_copy... no checking for seteuid... yes checking for strerror... yes checking for putenv... yes checking for iconv_open... yes checking for locale_charset... no checking for nl_langinfo... yes checking for getxattr... yes checking for extattr_get_link... no checking for sigaction... yes checking for sigprocmask... yes checking for setattrlist... no checking for utimensat... yes checking for getpgrp... yes checking for tcgetpgrp... yes checking whether getpgrp requires zero arguments... yes checking whether chown() modifies symlinks... no checking whether link() can hard-link symlinks... yes checking whether link() can hard-link special files... no checking for working socketpair... no checking for poptGetContext in -lpopt... no checking whether to use included libpopt... ./popt checking for unsigned char... yes checking for broken readdir... no checking for utimbuf... no checking if gettimeofday takes tz argument... no checking for C99 vsnprintf... no checking for secure mkstemp... yes checking if mknod creates FIFOs... no checking if mknod creates sockets... no checking whether -c -o works... yes checking for _acl... no checking for __acl... no checking for _facl... no checking for __facl... no checking whether to support ACLs... running tests: checking for acl_get_file in -lacl... no checking for ACL support... no checking ACL test results... No ACL support found checking whether to support extended attributes... Using Linux xattrs configure.sh: creating ./config.status config.status: creating config.h backuppc-xs 0.62 configuration successful cd md5 && make x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.62\" -DXS_VERSION=\"0.62\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" BackupPC_XS.c make[2]: Entering directory '/<>/md5' x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" md5.c ar cr libmd5.a md5.o : libmd5.a make[2]: Leaving directory '/<>/md5' x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.62\" -DXS_VERSION=\"0.62\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" bpc_attrib.c bpc_attrib.c: In function ‘bpc_attrib_dirWrite’: bpc_attrib.c:1249:50: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 8191 [-Wformat-truncation=] 1249 | snprintf(attribPathTemp, BPC_MAXPATHLEN, "%s.%d", attribPath, getpid()); | ^~ In file included from /usr/include/stdio.h:964, from ./rsync.h:38, from backuppc.h:24, from bpc_attrib.c:20: In function ‘snprintf’, inlined from ‘bpc_attrib_dirWrite’ at bpc_attrib.c:1249:5: /usr/include/x86_64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 3 and 8204 bytes into a destination of size 8192 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ bpc_attrib.c: In function ‘bpc_attrib_dirWrite’: bpc_attrib.c:1146:50: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 8191 [-Wformat-truncation=] 1146 | snprintf(attribPathTemp, BPC_MAXPATHLEN, "%s.%d", attribPath, getpid()); | ^~ In function ‘snprintf’, inlined from ‘bpc_attrib_dirWriteOld’ at bpc_attrib.c:1146:5, inlined from ‘bpc_attrib_dirWrite’ at bpc_attrib.c:1233:43: /usr/include/x86_64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 3 and 8204 bytes into a destination of size 8192 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.62\" -DXS_VERSION=\"0.62\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" bpc_attribCache.c bpc_attribCache.c: In function ‘bpc_attribCache_loadPath’: bpc_attribCache.c:234:68: warning: ‘__builtin___snprintf_chk’ output may be truncated before the last format character [-Wformat-truncation=] 234 | snprintf(fullAttribPath, sizeof(fullAttribPath), "%s/%s", topDir, attribPath); | ^ In file included from /usr/include/stdio.h:964, from ./rsync.h:38, from backuppc.h:24, from bpc_attribCache.c:20: In function ‘snprintf’, inlined from ‘bpc_attribCache_loadPath’ at bpc_attribCache.c:234:13: /usr/include/x86_64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output 2 or more bytes (assuming 16385) into a destination of size 16384 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ bpc_attribCache.c: In function ‘bpc_attribCache_loadInode’: bpc_attribCache.c:366:63: warning: ‘%s’ directive output may be truncated writing up to 8191 bytes into a region of size between 8186 and 16377 [-Wformat-truncation=] 366 | snprintf(inodeDir, sizeof(inodeDir), "%s/pc/%s/%d/%s", BPC_TopDir, ac->hostName, ac->bkupMergeList[i].num, attribDir); | ^~ ~~~~~~~~~ In function ‘snprintf’, inlined from ‘bpc_attribCache_loadInode’ at bpc_attribCache.c:366:13: /usr/include/x86_64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output 8 or more bytes (assuming 16390) into a destination of size 16384 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ bpc_attribCache.c: In function ‘bpc_attribCache_loadInode’: bpc_attribCache.c:367:66: warning: ‘%s’ directive output may be truncated writing up to 8191 bytes into a region of size between 0 and 16383 [-Wformat-truncation=] 367 | snprintf(fullAttribPath, sizeof(fullAttribPath), "%s/%s", inodeDir, attribFile); | ^~ ~~~~~~~~~~ In function ‘snprintf’, inlined from ‘bpc_attribCache_loadInode’ at bpc_attribCache.c:367:13: /usr/include/x86_64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 2 and 24576 bytes into a destination of size 16384 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.62\" -DXS_VERSION=\"0.62\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" bpc_dirOps.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.62\" -DXS_VERSION=\"0.62\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" bpc_fileDigest.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.62\" -DXS_VERSION=\"0.62\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" bpc_fileZIO.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.62\" -DXS_VERSION=\"0.62\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" bpc_hashtable.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.62\" -DXS_VERSION=\"0.62\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" bpc_lib.c bpc_lib.c: In function ‘bpc_digest_md52path_v3’: bpc_lib.c:185:44: warning: ‘%c’ directive output may be truncated writing 1 byte into a region of size between 0 and 8191 [-Wformat-truncation=] 185 | snprintf(path, BPC_MAXPATHLEN, "%s/%c/%c/%c/%s_%d", compress ? BPC_CPoolDir3 : BPC_PoolDir3, n0, n1, n2, hexStr, ext); | ^~ bpc_lib.c:185:40: note: using the range [-2147483648, 2147483647] for directive argument 185 | snprintf(path, BPC_MAXPATHLEN, "%s/%c/%c/%c/%s_%d", compress ? BPC_CPoolDir3 : BPC_PoolDir3, n0, n1, n2, hexStr, ext); | ^~~~~~~~~~~~~~~~~~~ In file included from /usr/include/stdio.h:964, from ./rsync.h:38, from backuppc.h:24, from bpc_lib.c:20: In function ‘snprintf’, inlined from ‘bpc_digest_md52path_v3’ at bpc_lib.c:185:9: /usr/include/x86_64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 10 and 8251 bytes into a destination of size 8192 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ bpc_lib.c: In function ‘bpc_digest_md52path_v3’: bpc_lib.c:187:44: warning: ‘%c’ directive output may be truncated writing 1 byte into a region of size between 0 and 8191 [-Wformat-truncation=] 187 | snprintf(path, BPC_MAXPATHLEN, "%s/%c/%c/%c/%s", compress ? BPC_CPoolDir3 : BPC_PoolDir3, n0, n1, n2, hexStr); | ^~ In function ‘snprintf’, inlined from ‘bpc_digest_md52path_v3’ at bpc_lib.c:187:9: /usr/include/x86_64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 8 and 8239 bytes into a destination of size 8192 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ bpc_lib.c: In function ‘bpc_lib_conf_init’: bpc_lib.c:40:56: warning: ‘%s’ directive output may be truncated writing 5 bytes into a region of size between 0 and 8191 [-Wformat-truncation=] 40 | snprintf(BPC_CPoolDir, sizeof(BPC_CPoolDir), "%s/%s", BPC_TopDir, "cpool"); | ^~ ~~~~~~~ In function ‘snprintf’, inlined from ‘bpc_lib_conf_init’ at bpc_lib.c:40:5: /usr/include/x86_64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 7 and 8198 bytes into a destination of size 8192 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ bpc_lib.c: In function ‘bpc_lib_conf_init’: bpc_lib.c:41:56: warning: ‘%s’ directive output may be truncated writing 5 bytes into a region of size between 0 and 8191 [-Wformat-truncation=] 41 | snprintf(BPC_CPoolDir3, sizeof(BPC_CPoolDir3), "%s/%s", BPC_TopDir, "cpool"); | ^~ ~~~~~~~ In function ‘snprintf’, inlined from ‘bpc_lib_conf_init’ at bpc_lib.c:41:5: /usr/include/x86_64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 7 and 8198 bytes into a destination of size 8192 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ bpc_lib.c: In function ‘bpc_lib_conf_init’: bpc_lib.c:42:56: warning: ‘%s’ directive output may be truncated writing 4 bytes into a region of size between 0 and 8191 [-Wformat-truncation=] 42 | snprintf(BPC_PoolDir, sizeof(BPC_PoolDir), "%s/%s", BPC_TopDir, "pool"); | ^~ ~~~~~~ In function ‘snprintf’, inlined from ‘bpc_lib_conf_init’ at bpc_lib.c:42:5: /usr/include/x86_64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 6 and 8197 bytes into a destination of size 8192 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ bpc_lib.c: In function ‘bpc_lib_conf_init’: bpc_lib.c:43:56: warning: ‘%s’ directive output may be truncated writing 4 bytes into a region of size between 0 and 8191 [-Wformat-truncation=] 43 | snprintf(BPC_PoolDir3, sizeof(BPC_PoolDir3), "%s/%s", BPC_TopDir, "pool"); | ^~ ~~~~~~ In function ‘snprintf’, inlined from ‘bpc_lib_conf_init’ at bpc_lib.c:43:5: /usr/include/x86_64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 6 and 8197 bytes into a destination of size 8192 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.62\" -DXS_VERSION=\"0.62\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" bpc_poolWrite.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"0.62\" -DXS_VERSION=\"0.62\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" bpc_refCount.c bpc_poolWrite.c: In function ‘bpc_poolWrite_addToPool’: bpc_poolWrite.c:762:47: warning: ‘.lock’ directive output may be truncated writing 5 bytes into a region of size between 1 and 8192 [-Wformat-truncation=] 762 | snprintf(lockFile, BPC_MAXPATHLEN, "%s.lock", poolPath); | ^~~~~ In file included from /usr/include/stdio.h:964, from ./rsync.h:38, from backuppc.h:24, from bpc_poolWrite.c:20: In function ‘snprintf’, inlined from ‘bpc_poolWrite_addToPool’ at bpc_poolWrite.c:762:9: /usr/include/x86_64-linux-gnu/bits/stdio2.h:54:10: note: ‘__builtin___snprintf_chk’ output between 6 and 8197 bytes into a destination of size 8192 54 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 55 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ rm -f blib/arch/auto/BackupPC/XS/XS.so x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now -shared -L/usr/local/lib -fstack-protector-strong BackupPC_XS.o bpc_attrib.o bpc_attribCache.o bpc_dirOps.o bpc_fileDigest.o bpc_fileZIO.o bpc_hashtable.o bpc_lib.o bpc_poolWrite.o bpc_refCount.o -o blib/arch/auto/BackupPC/XS/XS.so md5/libmd5.a \ -lz \ chmod 755 blib/arch/auto/BackupPC/XS/XS.so Manifying 1 pod document make[1]: Leaving directory '/<>' dh_auto_test -a make -j2 test TEST_VERBOSE=1 make[1]: Entering directory '/<>' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- XS.bs blib/arch/auto/BackupPC/XS/XS.bs 644 make[2]: Entering directory '/<>/md5' No tests defined for BackupPC::XS::md5 extension. make[2]: Leaving directory '/<>/md5' make[2]: Entering directory '/<>/zlib' x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" adler32.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" compress.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" crc32.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" deflate.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" inffast.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" inflate.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" inftrees.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" trees.c x86_64-linux-gnu-gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" zutil.c ar cr libzlib.a adler32.o compress.o crc32.o deflate.o inffast.o inflate.o inftrees.o trees.o zutil.o : libzlib.a No tests defined for BackupPC::XS::zlib extension. make[2]: Leaving directory '/<>/zlib' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/BackupPC_XS.t .. 1..1 ok 1 - use BackupPC::XS; ok All tests successful. Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.04 cusr 0.00 csys = 0.06 CPU) Result: PASS make[1]: Leaving directory '/<>' create-stamp debian/debhelper-build-stamp dh_prep -a dh_auto_install --destdir=debian/libbackuppc-xs-perl/ -a make -j2 install DESTDIR=/<>/debian/libbackuppc-xs-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/<>' "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- XS.bs blib/arch/auto/BackupPC/XS/XS.bs 644 Manifying 1 pod document Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /<>/debian/libbackuppc-xs-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/auto/BackupPC/XS/XS.so Installing /<>/debian/libbackuppc-xs-perl/usr/lib/x86_64-linux-gnu/perl5/5.40/BackupPC/XS.pm Installing /<>/debian/libbackuppc-xs-perl/usr/share/man/man3/BackupPC::XS.3pm make[1]: Leaving directory '/<>' dh_installdocs -a dh_installchangelogs -a dh_installman -a dh_perl -a dh_link -a dh_strip_nondeterminism -a dh_compress -a dh_fixperms -a dh_missing -a dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb -a dh_gencontrol -a dh_md5sums -a dh_builddeb -a dpkg-deb: building package 'libbackuppc-xs-perl' in '../libbackuppc-xs-perl_0.62-2+b5_amd64.deb'. dpkg-deb: building package 'libbackuppc-xs-perl-dbgsym' in '../libbackuppc-xs-perl-dbgsym_0.62-2+b5_amd64.deb'. dpkg-genbuildinfo --build=any -O../libbackuppc-xs-perl_0.62-2+b5_amd64.buildinfo dpkg-genchanges --build=any -mDebian Perl autobuilder -O../libbackuppc-xs-perl_0.62-2+b5_amd64.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source -Zxz --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2024-06-01T19:17:56Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ libbackuppc-xs-perl_0.62-2+b5_amd64.changes: -------------------------------------------- Format: 1.8 Date: Sat, 01 Jun 2024 19:17:38 +0000 Source: libbackuppc-xs-perl (0.62-2) Binary: libbackuppc-xs-perl libbackuppc-xs-perl-dbgsym Binary-Only: yes Architecture: amd64 Version: 0.62-2+b5 Distribution: perl-5.40 Urgency: low Maintainer: Debian Perl autobuilder Changed-By: Debian Perl autobuilder Description: libbackuppc-xs-perl - Perl module with C backend for BackupPC 4 Changes: libbackuppc-xs-perl (0.62-2+b5) perl-5.40; urgency=low, binary-only=yes . * Binary-only non-maintainer upload for amd64; no source changes. * Rebuild for Perl 5.40 Checksums-Sha1: f73e2599f288eb545e33683d104d280366ac60c1 196184 libbackuppc-xs-perl-dbgsym_0.62-2+b5_amd64.deb 59f6364cdfcf63595eb8a0f4a33b1c99b724cee9 5435 libbackuppc-xs-perl_0.62-2+b5_amd64.buildinfo dadcca3d6dcbcc33779230d4c61a652627b8b1ea 64440 libbackuppc-xs-perl_0.62-2+b5_amd64.deb Checksums-Sha256: df711265796dd25f0037542158ac29a3157810ca11f5548dcb46e87437bae6ad 196184 libbackuppc-xs-perl-dbgsym_0.62-2+b5_amd64.deb e89ed617f0aa9f156ed5fa5dab4e42a3ce984c03091524da5c475510898e362c 5435 libbackuppc-xs-perl_0.62-2+b5_amd64.buildinfo 21d06793d328a1d733d8b6d4433a6df9c4a09102b21c167264af5041732e0815 64440 libbackuppc-xs-perl_0.62-2+b5_amd64.deb Files: d2cc43565d7d92da4d8881aa5cf0f8d4 196184 debug optional libbackuppc-xs-perl-dbgsym_0.62-2+b5_amd64.deb 9304ff0caec1c07906133bd70aa3a4da 5435 perl optional libbackuppc-xs-perl_0.62-2+b5_amd64.buildinfo 9aa53396bb3ee818480ada2dd37179c6 64440 perl optional libbackuppc-xs-perl_0.62-2+b5_amd64.deb +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: libbackuppc-xs-perl (0.62-2) Binary: libbackuppc-xs-perl libbackuppc-xs-perl-dbgsym Architecture: amd64 Version: 0.62-2+b5 Binary-Only-Changes: libbackuppc-xs-perl (0.62-2+b5) perl-5.40; urgency=low, binary-only=yes . * Binary-only non-maintainer upload for amd64; no source changes. * Rebuild for Perl 5.40 . -- Debian Perl autobuilder Sat, 01 Jun 2024 19:17:38 +0000 Checksums-Md5: d2cc43565d7d92da4d8881aa5cf0f8d4 196184 libbackuppc-xs-perl-dbgsym_0.62-2+b5_amd64.deb 9aa53396bb3ee818480ada2dd37179c6 64440 libbackuppc-xs-perl_0.62-2+b5_amd64.deb Checksums-Sha1: f73e2599f288eb545e33683d104d280366ac60c1 196184 libbackuppc-xs-perl-dbgsym_0.62-2+b5_amd64.deb dadcca3d6dcbcc33779230d4c61a652627b8b1ea 64440 libbackuppc-xs-perl_0.62-2+b5_amd64.deb Checksums-Sha256: df711265796dd25f0037542158ac29a3157810ca11f5548dcb46e87437bae6ad 196184 libbackuppc-xs-perl-dbgsym_0.62-2+b5_amd64.deb 21d06793d328a1d733d8b6d4433a6df9c4a09102b21c167264af5041732e0815 64440 libbackuppc-xs-perl_0.62-2+b5_amd64.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Sat, 01 Jun 2024 19:17:56 +0000 Build-Path: /<> Build-Tainted-By: merged-usr-via-aliased-dirs usr-local-has-programs Installed-Build-Depends: autoconf (= 2.71-3), automake (= 1:1.16.5-1.3), autopoint (= 0.21-14), autotools-dev (= 20220109.1), base-files (= 13.2), base-passwd (= 3.6.3), bash (= 5.2.21-2+b1), binutils (= 2.42-4), binutils-common (= 2.42-4), binutils-x86-64-linux-gnu (= 2.42-4), bsdextrautils (= 2.40.1-4), bsdutils (= 1:2.40.1-4), build-essential (= 12.10), bzip2 (= 1.0.8-5.1), coreutils (= 9.4-3.1), cpp (= 4:13.2.0-7), cpp-13 (= 13.2.0-25), cpp-13-x86-64-linux-gnu (= 13.2.0-25), cpp-x86-64-linux-gnu (= 4:13.2.0-7), dash (= 0.5.12-8), debconf (= 1.5.86), debhelper (= 13.15.3), debianutils (= 5.17), dh-autoreconf (= 20), dh-strip-nondeterminism (= 1.14.0-1), diffutils (= 1:3.10-1), dpkg (= 1.22.6), dpkg-dev (= 1.22.6), dwz (= 0.15-1+b1), file (= 1:5.45-3), findutils (= 4.9.0-6), g++ (= 4:13.2.0-7), g++-13 (= 13.2.0-25), g++-13-x86-64-linux-gnu (= 13.2.0-25), g++-x86-64-linux-gnu (= 4:13.2.0-7), gcc (= 4:13.2.0-7), gcc-13 (= 13.2.0-25), gcc-13-base (= 13.2.0-25), gcc-13-x86-64-linux-gnu (= 13.2.0-25), gcc-14-base (= 14.1.0-1), gcc-x86-64-linux-gnu (= 4:13.2.0-7), gettext (= 0.21-14+b1), gettext-base (= 0.21-14+b1), grep (= 3.11-4), groff-base (= 1.23.0-4), gzip (= 1.12-1.1), hostname (= 3.23+nmu2), init-system-helpers (= 1.66), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.3.2-2), libarchive-zip-perl (= 1.68-1), libasan8 (= 14.1.0-1), libatomic1 (= 14.1.0-1), libattr1 (= 1:2.5.2-1), libaudit-common (= 1:3.1.2-2.1), libaudit1 (= 1:3.1.2-2.1), libbinutils (= 2.42-4), libblkid1 (= 2.40.1-4), libbz2-1.0 (= 1.0.8-5.1), libc-bin (= 2.38-11), libc-dev-bin (= 2.38-11), libc6 (= 2.38-11), libc6-dev (= 2.38-11), libcap-ng0 (= 0.8.5-1), libcap2 (= 1:2.66-5), libcc1-0 (= 14.1.0-1), libcrypt-dev (= 1:4.4.36-4), libcrypt1 (= 1:4.4.36-4), libctf-nobfd0 (= 2.42-4), libctf0 (= 2.42-4), libdb5.3t64 (= 5.3.28+dfsg2-7), libdebconfclient0 (= 0.272), libdebhelper-perl (= 13.15.3), libdpkg-perl (= 1.22.6), libelf1t64 (= 0.191-1+b1), libfile-stripnondeterminism-perl (= 1.14.0-1), libgcc-13-dev (= 13.2.0-25), libgcc-s1 (= 14.1.0-1), libgdbm-compat4t64 (= 1.23-5.1+b1), libgdbm6t64 (= 1.23-5.1+b1), libgmp10 (= 2:6.3.0+dfsg-2+b1), libgomp1 (= 14.1.0-1), libgprofng0 (= 2.42-4), libhwasan0 (= 14.1.0-1), libicu72 (= 72.1-4+b1), libisl23 (= 0.26-3+b2), libitm1 (= 14.1.0-1), libjansson4 (= 2.14-2+b2), liblsan0 (= 14.1.0-1), liblzma5 (= 5.6.1+really5.4.5-1), libmagic-mgc (= 1:5.45-3), libmagic1t64 (= 1:5.45-3), libmd0 (= 1.1.0-2), libmount1 (= 2.40.1-4), libmpc3 (= 1.3.1-1+b2), libmpfr6 (= 4.2.1-1+b1), libpam-modules (= 1.5.3-7), libpam-modules-bin (= 1.5.3-7), libpam-runtime (= 1.5.3-7), libpam0g (= 1.5.3-7), libpcre2-8-0 (= 10.42-4+b1), libperl-dev (= 5.40.0~rc1-1), libperl5.40 (= 5.40.0~rc1-1), libpipeline1 (= 1.5.7-2), libquadmath0 (= 14.1.0-1), libseccomp2 (= 2.5.5-1), libselinux1 (= 3.5-2+b2), libsframe1 (= 2.42-4), libsmartcols1 (= 2.40.1-4), libssl3t64 (= 3.2.1-3), libstdc++-13-dev (= 13.2.0-25), libstdc++6 (= 14.1.0-1), libsystemd0 (= 256~rc3-7), libtinfo6 (= 6.5-2), libtool (= 2.4.7-7), libtsan2 (= 14.1.0-1), libubsan1 (= 14.1.0-1), libuchardet0 (= 0.0.8-1+b1), libudev1 (= 256~rc3-7), libunistring5 (= 1.2-1), libuuid1 (= 2.40.1-4), libxml2 (= 2.12.7+dfsg-2), libzstd1 (= 1.5.5+dfsg2-2), linux-libc-dev (= 6.8.11-1), login (= 1:4.13+dfsg1-4), m4 (= 1.4.19-4), make (= 4.3-4.1), man-db (= 2.12.1-1), mawk (= 1.3.4.20240123-1), ncurses-base (= 6.5-2), ncurses-bin (= 6.5-2), patch (= 2.7.6-7), perl (= 5.40.0~rc1-1), perl-base (= 5.40.0~rc1-1), perl-modules-5.40 (= 5.40.0~rc1-1), po-debconf (= 1.0.21+nmu1), rpcsvc-proto (= 1.4.3-1), sed (= 4.9-2), sensible-utils (= 0.0.22), sysvinit-utils (= 3.09-1), tar (= 1.35+dfsg-3), usr-is-merged (= 39), util-linux (= 2.40.1-4), xz-utils (= 5.6.1+really5.4.5-1), zlib1g (= 1:1.3.dfsg+really1.3.1-1), zlib1g-dev (= 1:1.3.dfsg+really1.3.1-1) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="en_GB.UTF-8" LC_ALL="C.UTF-8" LC_COLLATE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" SOURCE_DATE_EPOCH="1717269458" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libbackuppc-xs-perl-dbgsym_0.62-2+b5_amd64.deb ---------------------------------------------- new Debian package, version 2.0. size 196184 bytes: control archive=560 bytes. 435 bytes, 13 lines control 106 bytes, 1 lines md5sums Package: libbackuppc-xs-perl-dbgsym Source: libbackuppc-xs-perl (0.62-2) Version: 0.62-2+b5 Auto-Built-Package: debug-symbols Architecture: amd64 Maintainer: Debian BackupPC Team Installed-Size: 216 Depends: libbackuppc-xs-perl (= 0.62-2+b5) Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libbackuppc-xs-perl Build-Ids: da209f0b51a720ce131c226f81b0304c9550b16c drwxr-xr-x root/root 0 2024-06-01 19:17 ./ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/lib/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/lib/debug/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/lib/debug/.build-id/da/ -rw-r--r-- root/root 210768 2024-06-01 19:17 ./usr/lib/debug/.build-id/da/209f0b51a720ce131c226f81b0304c9550b16c.debug drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/share/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/share/doc/ lrwxrwxrwx root/root 0 2024-06-01 19:17 ./usr/share/doc/libbackuppc-xs-perl-dbgsym -> libbackuppc-xs-perl libbackuppc-xs-perl_0.62-2+b5_amd64.deb --------------------------------------- new Debian package, version 2.0. size 64440 bytes: control archive=900 bytes. 580 bytes, 16 lines control 667 bytes, 8 lines md5sums Package: libbackuppc-xs-perl Source: libbackuppc-xs-perl (0.62-2) Version: 0.62-2+b5 Architecture: amd64 Maintainer: Debian BackupPC Team Installed-Size: 191 Depends: perl (>= 5.40.0~rc1-1), perlapi-5.40.0, libc6 (>= 2.33), zlib1g (>= 1:1.1.4) Section: perl Priority: optional Multi-Arch: same Homepage: https://github.com/backuppc/backuppc-xs Description: Perl module with C backend for BackupPC 4 BackupPC::XS implements various BackupPC functions in a perl-callable module. . This module is required for BackupPC version 4 and above. drwxr-xr-x root/root 0 2024-06-01 19:17 ./ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/lib/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/lib/x86_64-linux-gnu/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/lib/x86_64-linux-gnu/perl5/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/lib/x86_64-linux-gnu/perl5/5.40/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/lib/x86_64-linux-gnu/perl5/5.40/BackupPC/ -rw-r--r-- root/root 7821 2020-06-20 18:18 ./usr/lib/x86_64-linux-gnu/perl5/5.40/BackupPC/XS.pm drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/BackupPC/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/BackupPC/XS/ -rw-r--r-- root/root 157728 2024-06-01 19:17 ./usr/lib/x86_64-linux-gnu/perl5/5.40/auto/BackupPC/XS/XS.so drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/share/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/share/doc/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/share/doc/libbackuppc-xs-perl/ -rw-r--r-- root/root 1472 2020-06-20 18:18 ./usr/share/doc/libbackuppc-xs-perl/README -rw-r--r-- root/root 214 2024-06-01 19:17 ./usr/share/doc/libbackuppc-xs-perl/changelog.Debian.amd64.gz -rw-r--r-- root/root 771 2024-06-01 19:17 ./usr/share/doc/libbackuppc-xs-perl/changelog.Debian.gz -rw-r--r-- root/root 1987 2020-06-20 18:18 ./usr/share/doc/libbackuppc-xs-perl/changelog.gz -rw-r--r-- root/root 2696 2020-10-18 11:41 ./usr/share/doc/libbackuppc-xs-perl/copyright drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/share/man/ drwxr-xr-x root/root 0 2024-06-01 19:17 ./usr/share/man/man3/ -rw-r--r-- root/root 2824 2024-06-01 19:17 ./usr/share/man/man3/BackupPC::XS.3pm.gz +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: any Build-Space: 5356 Build-Time: 18 Distribution: perl-5.40 Host Architecture: amd64 Install-Time: 5 Job: /srv/debomatic/incoming/libbackuppc-xs-perl_0.62-2.dsc Machine Architecture: amd64 Package: libbackuppc-xs-perl Package-Time: 30 Source-Version: 0.62-2 Space: 5356 Status: successful Version: 0.62-2+b5 -------------------------------------------------------------------------------- Finished at 2024-06-01T19:17:56Z Build needed 00:00:30, 5356k disk space