sbuild (Debian sbuild) 0.85.10 (30 May 2024) on carme.larted.org.uk +==============================================================================+ | libsys-filesystem-perl 1.408-1 (amd64) Sun, 04 Aug 2024 12:41:52 +0000 | +==============================================================================+ Package: libsys-filesystem-perl Version: 1.408-1 Source Version: 1.408-1 Distribution: perl-5.40-throwaway Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: NOTICE: Log filtering will replace 'var/run/schroot/mount/perl-5.40-amd64-debomatic-ab100b49-4402-40ed-914d-caaed53c55da' with '<>' +------------------------------------------------------------------------------+ | Chroot Setup Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libsys-filesystem-perl_1.408-1 perl-5.40-throwaway amd64 ------------------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libsys-filesystem-perl_1.408-1 perl-5.40-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: NOTICE: Log filtering will replace 'build/libsys-filesystem-perl-eQ37da/resolver-SCAnaa' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.40 InRelease [3042 B] Hit:2 http://localhost:3142/debian sid InRelease Get:1 file:/srv/reprepro perl-5.40 InRelease [3042 B] Hit:3 http://deb.debian.org/debian unstable InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/libsys-filesystem-perl_1.408-1.dsc exists in /srv/debomatic/incoming; copying to chroot I: NOTICE: Log filtering will replace 'build/libsys-filesystem-perl-eQ37da/libsys-filesystem-perl-1.408' with '<>' I: NOTICE: Log filtering will replace 'build/libsys-filesystem-perl-eQ37da' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 13), perl, build-essential, fakeroot, libmodule-pluggable-perl, libparams-util-perl Filtered Build-Depends: debhelper-compat (= 13), perl, build-essential, fakeroot, libmodule-pluggable-perl, libparams-util-perl dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [609 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [712 B] Get:5 copy:/<>/apt_archive ./ Packages [702 B] Fetched 2023 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libmodule-pluggable-perl libparams-util-perl libpipeline1 libtool libuchardet0 libxml2 m4 man-db po-debconf sensible-utils Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev groff libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libarchive-cpio-perl libmodule-runtime-perl libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libmodule-pluggable-perl libparams-util-perl libpipeline1 libtool libuchardet0 libxml2 m4 man-db po-debconf sbuild-build-depends-main-dummy sensible-utils 0 upgraded, 34 newly installed, 0 to remove and 0 not upgraded. Need to get 19.7 MB/19.7 MB of archives. After this operation, 75.6 MB of additional disk space will be used. Get:1 file:/srv/reprepro perl-5.40/main amd64 libparams-util-perl amd64 1.102-3+b1 [24.3 kB] Get:2 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [912 B] Get:3 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.45-3 [42.9 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.40.2-1 [96.1 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.7-2 [38.0 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.12.1-2 [1411 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.19-4 [287 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.71-3 [332 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.22.5-2 [723 kB] Get:18 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.16 [88.6 kB] Get:19 http://deb.debian.org/debian unstable/main amd64 libtool all 2.4.7-7 [517 kB] Get:20 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get:21 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:22 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get:23 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get:24 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.191-2 [188 kB] Get:25 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get:26 http://deb.debian.org/debian unstable/main amd64 libicu72 amd64 72.1-5 [9396 kB] Get:27 http://deb.debian.org/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg-3+b1 [671 kB] Get:28 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get:29 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:30 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get:31 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.16 [891 kB] Get:32 http://deb.debian.org/debian unstable/main amd64 libfakeroot amd64 1.35.1-1 [28.6 kB] Get:33 http://deb.debian.org/debian unstable/main amd64 fakeroot amd64 1.35.1-1 [74.5 kB] Get:34 http://deb.debian.org/debian unstable/main amd64 libmodule-pluggable-perl all 5.2-5 [23.0 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 19.7 MB in 0s (138 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 22966 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-1_amd64.deb ... Unpacking bsdextrautils (2.40.2-1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.7-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-2_amd64.deb ... Unpacking man-db (2.12.1-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.16_all.deb ... Unpacking libdebhelper-perl (13.16) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.191-2_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5_amd64.deb ... Unpacking libicu72:amd64 (72.1-5) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg-3+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg-3+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.16_all.deb ... Unpacking debhelper (13.16) ... Selecting previously unselected package libfakeroot:amd64. Preparing to unpack .../29-libfakeroot_1.35.1-1_amd64.deb ... Unpacking libfakeroot:amd64 (1.35.1-1) ... Selecting previously unselected package fakeroot. Preparing to unpack .../30-fakeroot_1.35.1-1_amd64.deb ... Unpacking fakeroot (1.35.1-1) ... Selecting previously unselected package libmodule-pluggable-perl. Preparing to unpack .../31-libmodule-pluggable-perl_5.2-5_all.deb ... Unpacking libmodule-pluggable-perl (5.2-5) ... Selecting previously unselected package libparams-util-perl. Preparing to unpack .../32-libparams-util-perl_1.102-3+b1_amd64.deb ... Unpacking libparams-util-perl (1.102-3+b1) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../33-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libmodule-pluggable-perl (5.2-5) ... Setting up libpipeline1:amd64 (1.5.7-2) ... Setting up libicu72:amd64 (72.1-5) ... Setting up bsdextrautils (2.40.2-1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.16) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libfakeroot:amd64 (1.35.1-1) ... Setting up libelf1t64:amd64 (0.191-2) ... Setting up fakeroot (1.35.1-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up libparams-util-perl (1.102-3+b1) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libxml2:amd64 (2.12.7+dfsg-3+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.16) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.39-6) ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 6.9.7-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.9.7-1 (2024-06-27) amd64 (x86_64) Toolchain package versions: binutils_2.42.90.20240720-2 dpkg-dev_1.22.11 g++-13_13.3.0-4 g++-14_14.2.0-1 gcc-13_13.3.0-4 gcc-14_14.2.0-1 libc6-dev_2.39-6 libstdc++-13-dev_13.3.0-4 libstdc++-14-dev_14.2.0-1 libstdc++6_14.2.0-1 linux-libc-dev_6.9.12-1 Package versions: adduser_3.137 apt_2.9.7 autoconf_2.71-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.4 base-passwd_3.6.4 bash_5.2.21-2.1 binutils_2.42.90.20240720-2 binutils-common_2.42.90.20240720-2 binutils-x86-64-linux-gnu_2.42.90.20240720-2 bsdextrautils_2.40.2-1 bsdutils_1:2.40.2-1 build-essential_12.10 bzip2_1.0.8-5.1 coreutils_9.4-3.1 cpp_4:14.1.0-2 cpp-13_13.3.0-4 cpp-13-x86-64-linux-gnu_13.3.0-4 cpp-14_14.2.0-1 cpp-14-x86-64-linux-gnu_14.2.0-1 cpp-x86-64-linux-gnu_4:14.1.0-2 dash_0.5.12-9 debconf_1.5.87 debhelper_13.16 debian-archive-keyring_2023.4 debianutils_5.20 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffutils_1:3.10-1 dirmngr_2.2.43-8 dpkg_1.22.11 dpkg-dev_1.22.11 dwz_0.15-1+b1 eatmydata_131-2 fakeroot_1.35.1-1 file_1:5.45-3 findutils_4.10.0-2 g++_4:14.1.0-2 g++-13_13.3.0-4 g++-13-x86-64-linux-gnu_13.3.0-4 g++-14_14.2.0-1 g++-14-x86-64-linux-gnu_14.2.0-1 g++-x86-64-linux-gnu_4:14.1.0-2 gcc_4:14.1.0-2 gcc-13_13.3.0-4 gcc-13-base_13.3.0-4 gcc-13-x86-64-linux-gnu_13.3.0-4 gcc-14_14.2.0-1 gcc-14-base_14.2.0-1 gcc-14-x86-64-linux-gnu_14.2.0-1 gcc-x86-64-linux-gnu_4:14.1.0-2 gettext_0.22.5-2 gettext-base_0.22.5-2 gnupg_2.2.43-8 gnupg-l10n_2.2.43-8 gnupg-utils_2.2.43-8 gpg_2.2.43-8 gpg-agent_2.2.43-8 gpg-wks-client_2.2.43-8 gpgconf_2.2.43-8 gpgsm_2.2.43-8 gpgv_2.2.43-8 grep_3.11-4 groff-base_1.23.0-5 gzip_1.12-1.1 hostname_3.23+nmu2 init-system-helpers_1.66 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-2 libapt-pkg6.0t64_2.9.7 libarchive-zip-perl_1.68-1 libasan8_14.2.0-1 libassuan0_2.5.6-1+b1 libatomic1_14.2.0-1 libattr1_1:2.5.2-1 libaudit-common_1:3.1.2-4 libaudit1_1:3.1.2-4+b1 libbinutils_2.42.90.20240720-2 libblkid1_2.40.2-1 libbsd0_0.12.2-1 libbz2-1.0_1.0.8-5.1 libc-bin_2.39-6 libc-dev-bin_2.39-6 libc-l10n_2.39-6 libc6_2.39-6 libc6-dev_2.39-6 libcap-ng0_0.8.5-1+b1 libcap2_1:2.66-5 libcc1-0_14.2.0-1 libcrypt-dev_1:4.4.36-4 libcrypt1_1:4.4.36-4 libctf-nobfd0_2.42.90.20240720-2 libctf0_2.42.90.20240720-2 libdb5.3t64_5.3.28+dfsg2-7 libdebconfclient0_0.272 libdebhelper-perl_13.16 libdpkg-perl_1.22.11 libeatmydata1_131-2 libelf1t64_0.191-2 libfakeroot_1.35.1-1 libffi8_3.4.6-1 libfile-stripnondeterminism-perl_1.14.0-1 libgcc-13-dev_13.3.0-4 libgcc-14-dev_14.2.0-1 libgcc-s1_14.2.0-1 libgcrypt20_1.11.0-5 libgdbm-compat4t64_1.23-6 libgdbm6t64_1.23-6 libgmp10_2:6.3.0+dfsg-2+b1 libgnutls30t64_3.8.6-2 libgomp1_14.2.0-1 libgpg-error0_1.50-2 libgprofng0_2.42.90.20240720-2 libhogweed6t64_3.10-1 libhwasan0_14.2.0-1 libicu72_72.1-5 libidn2-0_2.3.7-2 libisl23_0.26-3+b2 libitm1_14.2.0-1 libjansson4_2.14-2+b2 libksba8_1.6.7-2 libldap-2.5-0_2.5.18+dfsg-2+b1 liblsan0_14.2.0-1 liblz4-1_1.9.4-3 liblzma5_5.6.2-2 libmagic-mgc_1:5.45-3 libmagic1t64_1:5.45-3 libmd0_1.1.0-2 libmodule-pluggable-perl_5.2-5 libmount1_2.40.2-1 libmpc3_1.3.1-1+b2 libmpfr6_4.2.1-1+b1 libncursesw6_6.5-2 libnettle8t64_3.10-1 libnpth0t64_1.6-3.1 libp11-kit0_0.25.5-2 libpam-modules_1.5.3-7 libpam-modules-bin_1.5.3-7 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7 libparams-util-perl_1.102-3+b1 libpcre2-8-0_10.42-4+b1 libperl5.38t64_5.38.2-5 libperl5.40_5.40.0-1 libpipeline1_1.5.7-2 libquadmath0_14.2.0-1 libreadline8t64_8.2-4 libsasl2-2_2.1.28+dfsg1-6 libsasl2-modules-db_2.1.28+dfsg1-6 libseccomp2_2.5.5-1+b1 libselinux1_3.5-2+b3 libsemanage-common_3.5-1 libsemanage2_3.5-1+b4 libsepol2_3.5-2+b1 libsframe1_2.42.90.20240720-2 libsmartcols1_2.40.2-1 libsqlite3-0_3.46.0-1 libssl3t64_3.3.1-2 libstdc++-13-dev_13.3.0-4 libstdc++-14-dev_14.2.0-1 libstdc++6_14.2.0-1 libsystemd0_256.4-2 libtasn1-6_4.19.0-3+b2 libtinfo6_6.5-2 libtool_2.4.7-7 libtsan2_14.2.0-1 libubsan1_14.2.0-1 libuchardet0_0.0.8-1+b1 libudev1_256.4-2 libunistring5_1.2-1 libuuid1_2.40.2-1 libxml2_2.12.7+dfsg-3+b1 libxxhash0_0.8.2-2+b1 libzstd1_1.5.6+dfsg-1 linux-libc-dev_6.9.12-1 locales-all_2.39-6 login_1:4.15.3-3 m4_1.4.19-4 make_4.3-4.1 man-db_2.12.1-2 mawk_1.3.4.20240622-2 ncurses-base_6.5-2 ncurses-bin_6.5-2 passwd_1:4.15.3-3 patch_2.7.6-7 perl_5.40.0-1 perl-base_5.40.0-1 perl-modules-5.38_5.38.2-5 perl-modules-5.40_5.40.0-1 pinentry-curses_1.2.1-3+b2 po-debconf_1.0.21+nmu1 readline-common_8.2-4 rpcsvc-proto_1.4.3-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2 sensible-utils_0.0.24 sysvinit-utils_3.09-2 tar_1.35+dfsg-3 usr-is-merged_39 util-linux_2.40.2-1 xz-utils_5.6.2-2 zlib1g_1:1.3.dfsg+really1.3.1-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libsys-filesystem-perl Binary: libsys-filesystem-perl Architecture: all Version: 1.408-1 Maintainer: Debian Perl Group Uploaders: Ansgar Burchardt Homepage: https://metacpan.org/release/Sys-Filesystem Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libsys-filesystem-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libsys-filesystem-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), perl Build-Depends-Indep: libmodule-pluggable-perl , libparams-util-perl Package-List: libsys-filesystem-perl deb perl optional arch=all Checksums-Sha1: 059b5a1d94c72db76a1f3147187c89fb7692af26 31619 libsys-filesystem-perl_1.408.orig.tar.gz 3533060959ab70c42764c6e79ec21d96f2a22eab 4200 libsys-filesystem-perl_1.408-1.debian.tar.xz Checksums-Sha256: 577e11072b897d718c234181a5c059f8dc04b65fd95465f0b1292cb635974d97 31619 libsys-filesystem-perl_1.408.orig.tar.gz 9233948b91b4a49cdac8e26575c75da74e1fe4e45970d2408f5019af2641dc12 4200 libsys-filesystem-perl_1.408-1.debian.tar.xz Files: 0fee73467785f3d8372b9a2f0356cbcd 31619 libsys-filesystem-perl_1.408.orig.tar.gz e41a8d1700b0979a52fb83186d51fa5e 4200 libsys-filesystem-perl_1.408-1.debian.tar.xz Dgit: 92d70ce434986fda6768d00f71a5f8be9c836238 debian archive/debian/1.408-1 https://git.dgit.debian.org/libsys-filesystem-perl -----BEGIN PGP SIGNATURE----- iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAl+Up8RfFIAAAAAALgAo aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ qgaGUQ/+M5CRIHlraI1laAvjUhc/yjSHUkCo+reJU9JKb/QGnxlE3vNYv/4+VESy y9GT4ycmeOfeeON5UrSKAGRIBnuFOUlEE8/8avrxLBK1ZnV2lBudRQlMpuFmlRIf BlX/Vq5sMODXP/95kd4kD965kpxmOWeb2uyCJdPQK9XpcPDiJoJZgP+DIMsEYbTU en16MV+Zw/87/aUoA03wy9u3OoFwcNYFdn9VD10XoWW3X4OouHtJKFn9G1ZouTp6 5GVBzT/zalRUEC7UgcdUFCXyTfnorbR7nrBnegAyP+M9jg1wdiqe3B+KLSu0XF2O swjQsUB1qacT3dxcjwOA72nnhsYtIZ4mYKChkXO/dFZXv8aE2Y0bo58xByH0e9LX PiSL/Xzipx3IPTCWm0Bo6N9F5IJsgr1XywONguVjrUwuPNcSuprSgUWcTYMFfkAl 0flZQIIaKZ375C68983BdHQAwXrx8V4cd2fLOjGGMnIChaYBBcSFCJLgWz7bMoom zCNxxNUonm2aZoL/U2ikOUR4DO3l/dCNXfxQJJEX+dws37JwAq5U6HVlbe7ak84s uG67Bh4AwuQUlnp5rVwxlC6uOM5uhD0oQAbiXTXrsiRvWSL7W9VHfFo3Sxhzy60R CKBDZW1IQ6cUnVBB7H/5t3S8c72gP+0KIOidWU8C3ElFx+ybQP8= =XYk2 -----END PGP SIGNATURE----- gpgv: Signature made Sat Oct 24 22:16:36 2020 UTC gpgv: using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libsys-filesystem-perl_1.408-1.dsc: no acceptable signature found dpkg-source: info: extracting libsys-filesystem-perl in /<> dpkg-source: info: unpacking libsys-filesystem-perl_1.408.orig.tar.gz dpkg-source: info: unpacking libsys-filesystem-perl_1.408-1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-Make-the-test-suite-not-fail-on-build-hosts-with-no-.patch Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Timed Build Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libsys-filesystem-perl_1.408-1 perl-5.40-throwaway amd64 ------------------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libsys-filesystem-perl_1.408-1 perl-5.40-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANG=en_GB.UTF-8 LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=perl-5.40-throwaway-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.40-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.40-amd64-debomatic-ab100b49-4402-40ed-914d-caaed53c55da SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -rfakeroot -Zxz dpkg-buildpackage: info: source package libsys-filesystem-perl dpkg-buildpackage: info: source version 1.408-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by gregor herrmann dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean dpkg-source -Zxz -b . dpkg-source: info: using source format '3.0 (quilt)' dpkg-source: info: building libsys-filesystem-perl using existing ./libsys-filesystem-perl_1.408.orig.tar.gz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: building libsys-filesystem-perl in libsys-filesystem-perl_1.408-1.debian.tar.xz dpkg-source: info: building libsys-filesystem-perl in libsys-filesystem-perl_1.408-1.dsc debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Sys::Filesystem Writing MYMETA.yml and MYMETA.json dh_auto_build make -j2 make[1]: Entering directory '/<>' cp lib/Sys/Filesystem/Hpux.pm blib/lib/Sys/Filesystem/Hpux.pm cp lib/Sys/Filesystem/Freebsd.pm blib/lib/Sys/Filesystem/Freebsd.pm cp lib/Sys/Filesystem/Linux.pm blib/lib/Sys/Filesystem/Linux.pm cp lib/Sys/Filesystem.pm blib/lib/Sys/Filesystem.pm cp lib/Sys/Filesystem/Darwin.pm blib/lib/Sys/Filesystem/Darwin.pm cp lib/Sys/Filesystem/Solaris.pm blib/lib/Sys/Filesystem/Solaris.pm cp lib/Sys/Filesystem/Dummy.pm blib/lib/Sys/Filesystem/Dummy.pm cp lib/Sys/Filesystem/Netbsd.pm blib/lib/Sys/Filesystem/Netbsd.pm cp lib/Sys/Filesystem/Mswin32.pm blib/lib/Sys/Filesystem/Mswin32.pm cp lib/Sys/Filesystem/Cygwin.pm blib/lib/Sys/Filesystem/Cygwin.pm cp lib/Sys/Filesystem/Unix.pm blib/lib/Sys/Filesystem/Unix.pm cp lib/Sys/Filesystem/Aix.pm blib/lib/Sys/Filesystem/Aix.pm Manifying 12 pod documents make[1]: Leaving directory '/<>' dh_auto_test make -j2 test TEST_VERBOSE=1 make[1]: Entering directory '/<>' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t xt/*.t # Testing Sys::Filesystem 1.408, Perl 5.040000 (/usr/bin/perl) on linux-6.1.0 t/01_load.t ...... 1..2 ok 1 - require Sys::Filesystem; ok 2 - use Sys::Filesystem; ok # filesystem - mounted - special - device - options - format - volume - label - type # / - 1 - 0 - perl-5.40-amd64-debomatic - rw,relatime,lowerdir=/var/lib/schroot/union/underlay/perl-5.40-amd64-debomatic-ab100b49-4402-40ed-914d-caaed53c55da,upperdir=/var/lib/schroot/union/overlay/perl-5.40-amd64-debomatic-ab100b49-4402-40ed-914d-caaed53c55da/upper,workdir=/var/lib/schroot/union/overlay/perl-5.40-amd64-debomatic-ab100b49-4402-40ed-914d-caaed53c55da/work,uuid=on - overlay - 1 - 1 - overlay # /build - 1 - 0 - /dev/vda1 - rw,relatime,errors=remount-ro - ext4 - 1 - 1 - ext4 # /dev/pts - 1 - 1 - /dev/pts - rw,relatime,mode=600,ptmxmode=666 - devpts - 1 - 1 - devpts # /dev/shm - 1 - 1 - tmpfs - rw,relatime,inode64 - tmpfs - 1 - 1 - tmpfs # /proc - 1 - 1 - proc - rw,nosuid,nodev,noexec,relatime - proc - 1 - 1 - proc # /srv/reprepro - 1 - 0 - /dev/vda1 - ro,relatime,errors=remount-ro - ext4 - 1 - 1 - ext4 # /sys - 1 - 1 - sysfs - rw,nosuid,nodev,noexec,relatime - sysfs - 1 - 1 - sysfs # /usr/share/debomatic/sbuildcommands - 1 - 0 - /dev/vda1 - ro,relatime,errors=remount-ro - ext4 - 1 - 1 - ext4 t/02_basic.t ..... ok 1 - Create new Sys::Filesystem object ok 2 - Compare mounted methods ok 3 - Get list of regular and special filesystems ok 4 - Get list of all filesystems ok 5 - Mounted ok 6 - Unmounted ok 7 - Special ok 8 - Regular ok 9 - Get device for / ok 10 - Get options for /: rw,relatime,lowerdir=/var/lib/schroot/union/underlay/perl-5.40-amd64-debomatic-ab100b49-4402-40ed-914d-caaed53c55da,upperdir=/var/lib/schroot/union/overlay/perl-5.40-amd64-debomatic-ab100b49-4402-40ed-914d-caaed53c55da/upper,workdir=/var/lib/schroot/union/overlay/perl-5.40-amd64-debomatic-ab100b49-4402-40ed-914d-caaed53c55da/work,uuid=on ok 11 - Get format for / ok 12 - Get volume type for / ok 13 - Get label for / ok 14 - Mounted ok 15 - Unmounted ok 16 - Special ok 17 - Regular ok 18 - Get device for /build ok 19 - Get options for /build: rw,relatime,errors=remount-ro ok 20 - Get format for /build ok 21 - Get volume type for /build ok 22 - Get label for /build ok 23 - Mounted ok 24 - Unmounted ok 25 - Special ok 26 - Regular ok 27 - Get device for /dev/pts ok 28 - Get options for /dev/pts: rw,relatime,mode=600,ptmxmode=666 ok 29 - Get format for /dev/pts ok 30 - Get volume type for /dev/pts ok 31 - Get label for /dev/pts ok 32 - Mounted ok 33 - Unmounted ok 34 - Special ok 35 - Regular ok 36 - Get device for /dev/shm ok 37 - Get options for /dev/shm: rw,relatime,inode64 ok 38 - Get format for /dev/shm ok 39 - Get volume type for /dev/shm ok 40 - Get label for /dev/shm ok 41 - Mounted ok 42 - Unmounted ok 43 - Special ok 44 - Regular ok 45 - Get device for /proc ok 46 - Get options for /proc: rw,nosuid,nodev,noexec,relatime ok 47 - Get format for /proc ok 48 - Get volume type for /proc ok 49 - Get label for /proc ok 50 - Mounted ok 51 - Unmounted ok 52 - Special ok 53 - Regular ok 54 - Get device for /srv/reprepro ok 55 - Get options for /srv/reprepro: ro,relatime,errors=remount-ro ok 56 - Get format for /srv/reprepro ok 57 - Get volume type for /srv/reprepro ok 58 - Get label for /srv/reprepro ok 59 - Mounted ok 60 - Unmounted ok 61 - Special ok 62 - Regular ok 63 - Get device for /sys ok 64 - Get options for /sys: rw,nosuid,nodev,noexec,relatime ok 65 - Get format for /sys ok 66 - Get volume type for /sys ok 67 - Get label for /sys ok 68 - Mounted ok 69 - Unmounted ok 70 - Special ok 71 - Regular ok 72 - Get device for /usr/share/debomatic/sbuildcommands ok 73 - Get options for /usr/share/debomatic/sbuildcommands: ro,relatime,errors=remount-ro ok 74 - Get format for /usr/share/debomatic/sbuildcommands ok 75 - Get volume type for /usr/share/debomatic/sbuildcommands ok 76 - Get label for /usr/share/debomatic/sbuildcommands ok 77 - Get filesystem attached to perl-5.40-amd64-debomatic 1..77 ok t/03_whereami.t .. ok 1 - Create new Sys::Filesystem object ok 2 - Found mountpoint for test file '/<>/t/03_whereami.t' at '/build' # TODO Known fail for MSWin32, cygwin & Co. - let's make it not so important ... ok 3 - Found mountpoint for perl executable '/usr/bin/perl' at '/' # TODO Known fail for MSWin32, cygwin & Co. - let's make it not so important ... 1..3 ok t/04_special.t ... ok 1 - Create new Sys::Filesystem object ok 2 - Get list of regular filesystems ok 3 - Regular ok 4 - Regular ok 5 - Regular ok 6 - Regular ok 7 - Get list of regular filesystems ok 8 - Special ok 9 - Special ok 10 - Special ok 11 - Special 1..11 ok t/05_error.t ..... ok 1 - No object new ok 2 - No insane parameters ok 3 - No odd parameter list 1..3 ok t/06_settings.t .. ok 1 - perl-5.40-amd64-debomatic is not a symlink (canondev => 1) ok 2 - /dev/vda1 is not a symlink (canondev => 1) ok 3 - /dev/pts is not a symlink (canondev => 1) ok 4 - tmpfs is not a symlink (canondev => 1) ok 5 - proc is not a symlink (canondev => 1) ok 6 - /dev/vda1 is not a symlink (canondev => 1) ok 7 - sysfs is not a symlink (canondev => 1) ok 8 - /dev/vda1 is not a symlink (canondev => 1) ok 9 - $S::F::CANONDEV = 0 works as expected ok 10 - perl-5.40-amd64-debomatic is not a symlink ($S::F::CANONDEV = 1) ok 11 - /dev/vda1 is not a symlink ($S::F::CANONDEV = 1) ok 12 - /dev/pts is not a symlink ($S::F::CANONDEV = 1) ok 13 - tmpfs is not a symlink ($S::F::CANONDEV = 1) ok 14 - proc is not a symlink ($S::F::CANONDEV = 1) ok 15 - /dev/vda1 is not a symlink ($S::F::CANONDEV = 1) ok 16 - sysfs is not a symlink ($S::F::CANONDEV = 1) ok 17 - /dev/vda1 is not a symlink ($S::F::CANONDEV = 1) 1..17 ok All tests successful. Test Summary Report ------------------- t/03_whereami.t (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 2-3 Files=6, Tests=113, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.35 cusr 0.08 csys = 0.47 CPU) Result: PASS make[1]: Leaving directory '/<>' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libsys-filesystem-perl/ make -j2 install DESTDIR=/<>/debian/libsys-filesystem-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/<>' Manifying 12 pod documents Installing /<>/debian/libsys-filesystem-perl/usr/share/perl5/Sys/Filesystem.pm Installing /<>/debian/libsys-filesystem-perl/usr/share/perl5/Sys/Filesystem/Freebsd.pm Installing /<>/debian/libsys-filesystem-perl/usr/share/perl5/Sys/Filesystem/Aix.pm Installing /<>/debian/libsys-filesystem-perl/usr/share/perl5/Sys/Filesystem/Darwin.pm Installing /<>/debian/libsys-filesystem-perl/usr/share/perl5/Sys/Filesystem/Linux.pm Installing /<>/debian/libsys-filesystem-perl/usr/share/perl5/Sys/Filesystem/Dummy.pm Installing /<>/debian/libsys-filesystem-perl/usr/share/perl5/Sys/Filesystem/Cygwin.pm Installing /<>/debian/libsys-filesystem-perl/usr/share/perl5/Sys/Filesystem/Solaris.pm Installing /<>/debian/libsys-filesystem-perl/usr/share/perl5/Sys/Filesystem/Unix.pm Installing /<>/debian/libsys-filesystem-perl/usr/share/perl5/Sys/Filesystem/Hpux.pm Installing /<>/debian/libsys-filesystem-perl/usr/share/perl5/Sys/Filesystem/Mswin32.pm Installing /<>/debian/libsys-filesystem-perl/usr/share/perl5/Sys/Filesystem/Netbsd.pm Installing /<>/debian/libsys-filesystem-perl/usr/share/man/man3/Sys::Filesystem::Cygwin.3pm Installing /<>/debian/libsys-filesystem-perl/usr/share/man/man3/Sys::Filesystem::Netbsd.3pm Installing /<>/debian/libsys-filesystem-perl/usr/share/man/man3/Sys::Filesystem::Darwin.3pm Installing /<>/debian/libsys-filesystem-perl/usr/share/man/man3/Sys::Filesystem::Freebsd.3pm Installing /<>/debian/libsys-filesystem-perl/usr/share/man/man3/Sys::Filesystem::Linux.3pm Installing /<>/debian/libsys-filesystem-perl/usr/share/man/man3/Sys::Filesystem::Unix.3pm Installing /<>/debian/libsys-filesystem-perl/usr/share/man/man3/Sys::Filesystem.3pm Installing /<>/debian/libsys-filesystem-perl/usr/share/man/man3/Sys::Filesystem::Dummy.3pm Installing /<>/debian/libsys-filesystem-perl/usr/share/man/man3/Sys::Filesystem::Solaris.3pm Installing /<>/debian/libsys-filesystem-perl/usr/share/man/man3/Sys::Filesystem::Aix.3pm Installing /<>/debian/libsys-filesystem-perl/usr/share/man/man3/Sys::Filesystem::Hpux.3pm Installing /<>/debian/libsys-filesystem-perl/usr/share/man/man3/Sys::Filesystem::Mswin32.3pm make[1]: Leaving directory '/<>' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libsys-filesystem-perl' in '../libsys-filesystem-perl_1.408-1_all.deb'. dpkg-genbuildinfo -O../libsys-filesystem-perl_1.408-1_amd64.buildinfo dpkg-genchanges -O../libsys-filesystem-perl_1.408-1_amd64.changes dpkg-genchanges: info: including full source code in upload dpkg-source -Zxz --after-build . dpkg-buildpackage: info: full upload (original source is included) -------------------------------------------------------------------------------- Build finished at 2024-08-04T12:42:06Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ libsys-filesystem-perl_1.408-1_amd64.changes: --------------------------------------------- Format: 1.8 Date: Sun, 25 Oct 2020 00:13:26 +0200 Source: libsys-filesystem-perl Binary: libsys-filesystem-perl Architecture: source all Version: 1.408-1 Distribution: perl-5.40-throwaway Urgency: medium Maintainer: Debian Perl Group Changed-By: gregor herrmann Description: libsys-filesystem-perl - Perl module to retrieve list of filesystems and their properties Closes: 831316 Changes: libsys-filesystem-perl (1.408-1) unstable; urgency=medium . * Team upload. . [ Salvatore Bonaccorso ] * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. . [ Salvatore Bonaccorso ] * debian/control: Remove Franck Joncourt from Uploaders. Thanks to Tobias Frost (Closes: #831316) . [ gregor herrmann ] * Remove Alejandro Garrido Mota from Uploaders. Thanks for your work! * Remove Jonathan Yu from Uploaders. Thanks for your work! . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ gregor herrmann ] * debian/watch: use uscan version 4. * Import upstream version 1.408. * Refresh 0001-Make-the-test-suite-not-fail-on-build-hosts-with-no-.patch. * Update years of upstream copyright. * Declare compliance with Debian Policy 4.5.0. * Set Rules-Requires-Root: no. * Annotate test-only build dependencies with . * Bump debhelper-compat to 13. * Use HTTPS for some URLs in debian/. Thanks to duck. Checksums-Sha1: 1093004c5b7b2725dfe906805ca3980a68c1862e 1344 libsys-filesystem-perl_1.408-1.dsc 059b5a1d94c72db76a1f3147187c89fb7692af26 31619 libsys-filesystem-perl_1.408.orig.tar.gz 226baa64a5746dac8e151770c35a046f3a19e3f2 4204 libsys-filesystem-perl_1.408-1.debian.tar.xz ae2cfc5e08b9a5ceba2039fc25cd9e9e21fc4895 45056 libsys-filesystem-perl_1.408-1_all.deb d9d10691e98ac520f253c719ca8859f33131a893 5234 libsys-filesystem-perl_1.408-1_amd64.buildinfo Checksums-Sha256: 86fc9e6f3b19bdbf68cfc26b58cf4b0b4632b88200717dd3825314ab24e9f76a 1344 libsys-filesystem-perl_1.408-1.dsc 577e11072b897d718c234181a5c059f8dc04b65fd95465f0b1292cb635974d97 31619 libsys-filesystem-perl_1.408.orig.tar.gz 41579f98d56da69ccbe02618381babdbf5eb505d6b24283914bf8d9adf9241a0 4204 libsys-filesystem-perl_1.408-1.debian.tar.xz 71c98404e7241d0955a7dcc0569aef39443ea8bde09039c8cd7e448a233e5baa 45056 libsys-filesystem-perl_1.408-1_all.deb a4d9213a8f6909668aac3e830da38addb9d0612aa17a9fda23182ff377e40400 5234 libsys-filesystem-perl_1.408-1_amd64.buildinfo Files: c6873d9dc57cc06b70218c30e00793ad 1344 perl optional libsys-filesystem-perl_1.408-1.dsc 0fee73467785f3d8372b9a2f0356cbcd 31619 perl optional libsys-filesystem-perl_1.408.orig.tar.gz 35c5bc339ad86d83a1955337374fd264 4204 perl optional libsys-filesystem-perl_1.408-1.debian.tar.xz 1e1f702b0b12f7c1e05664a69d2ed65c 45056 perl optional libsys-filesystem-perl_1.408-1_all.deb 121a44a64a21a3437e72ef19ea6ad40b 5234 perl optional libsys-filesystem-perl_1.408-1_amd64.buildinfo +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: libsys-filesystem-perl Binary: libsys-filesystem-perl Architecture: all source Version: 1.408-1 Checksums-Md5: c6873d9dc57cc06b70218c30e00793ad 1344 libsys-filesystem-perl_1.408-1.dsc 1e1f702b0b12f7c1e05664a69d2ed65c 45056 libsys-filesystem-perl_1.408-1_all.deb Checksums-Sha1: 1093004c5b7b2725dfe906805ca3980a68c1862e 1344 libsys-filesystem-perl_1.408-1.dsc ae2cfc5e08b9a5ceba2039fc25cd9e9e21fc4895 45056 libsys-filesystem-perl_1.408-1_all.deb Checksums-Sha256: 86fc9e6f3b19bdbf68cfc26b58cf4b0b4632b88200717dd3825314ab24e9f76a 1344 libsys-filesystem-perl_1.408-1.dsc 71c98404e7241d0955a7dcc0569aef39443ea8bde09039c8cd7e448a233e5baa 45056 libsys-filesystem-perl_1.408-1_all.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Sun, 04 Aug 2024 12:42:06 +0000 Build-Path: /<> Build-Tainted-By: merged-usr-via-aliased-dirs usr-local-has-programs Installed-Build-Depends: autoconf (= 2.71-3), automake (= 1:1.16.5-1.3), autopoint (= 0.22.5-2), autotools-dev (= 20220109.1), base-files (= 13.4), base-passwd (= 3.6.4), bash (= 5.2.21-2.1), binutils (= 2.42.90.20240720-2), binutils-common (= 2.42.90.20240720-2), binutils-x86-64-linux-gnu (= 2.42.90.20240720-2), bsdextrautils (= 2.40.2-1), bsdutils (= 1:2.40.2-1), build-essential (= 12.10), bzip2 (= 1.0.8-5.1), coreutils (= 9.4-3.1), cpp (= 4:14.1.0-2), cpp-13 (= 13.3.0-4), cpp-13-x86-64-linux-gnu (= 13.3.0-4), cpp-14 (= 14.2.0-1), cpp-14-x86-64-linux-gnu (= 14.2.0-1), cpp-x86-64-linux-gnu (= 4:14.1.0-2), dash (= 0.5.12-9), debconf (= 1.5.87), debhelper (= 13.16), debianutils (= 5.20), dh-autoreconf (= 20), dh-strip-nondeterminism (= 1.14.0-1), diffutils (= 1:3.10-1), dpkg (= 1.22.11), dpkg-dev (= 1.22.11), dwz (= 0.15-1+b1), file (= 1:5.45-3), findutils (= 4.10.0-2), g++ (= 4:14.1.0-2), g++-14 (= 14.2.0-1), g++-14-x86-64-linux-gnu (= 14.2.0-1), g++-x86-64-linux-gnu (= 4:14.1.0-2), gcc (= 4:14.1.0-2), gcc-13 (= 13.3.0-4), gcc-13-base (= 13.3.0-4), gcc-13-x86-64-linux-gnu (= 13.3.0-4), gcc-14 (= 14.2.0-1), gcc-14-base (= 14.2.0-1), gcc-14-x86-64-linux-gnu (= 14.2.0-1), gcc-x86-64-linux-gnu (= 4:14.1.0-2), gettext (= 0.22.5-2), gettext-base (= 0.22.5-2), grep (= 3.11-4), groff-base (= 1.23.0-5), gzip (= 1.12-1.1), hostname (= 3.23+nmu2), init-system-helpers (= 1.66), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.3.2-2), libarchive-zip-perl (= 1.68-1), libasan8 (= 14.2.0-1), libatomic1 (= 14.2.0-1), libattr1 (= 1:2.5.2-1), libaudit-common (= 1:3.1.2-4), libaudit1 (= 1:3.1.2-4+b1), libbinutils (= 2.42.90.20240720-2), libblkid1 (= 2.40.2-1), libbz2-1.0 (= 1.0.8-5.1), libc-bin (= 2.39-6), libc-dev-bin (= 2.39-6), libc6 (= 2.39-6), libc6-dev (= 2.39-6), libcap-ng0 (= 0.8.5-1+b1), libcap2 (= 1:2.66-5), libcc1-0 (= 14.2.0-1), libcrypt-dev (= 1:4.4.36-4), libcrypt1 (= 1:4.4.36-4), libctf-nobfd0 (= 2.42.90.20240720-2), libctf0 (= 2.42.90.20240720-2), libdb5.3t64 (= 5.3.28+dfsg2-7), libdebconfclient0 (= 0.272), libdebhelper-perl (= 13.16), libdpkg-perl (= 1.22.11), libelf1t64 (= 0.191-2), libfile-stripnondeterminism-perl (= 1.14.0-1), libgcc-13-dev (= 13.3.0-4), libgcc-14-dev (= 14.2.0-1), libgcc-s1 (= 14.2.0-1), libgdbm-compat4t64 (= 1.23-6), libgdbm6t64 (= 1.23-6), libgmp10 (= 2:6.3.0+dfsg-2+b1), libgomp1 (= 14.2.0-1), libgprofng0 (= 2.42.90.20240720-2), libhwasan0 (= 14.2.0-1), libicu72 (= 72.1-5), libisl23 (= 0.26-3+b2), libitm1 (= 14.2.0-1), libjansson4 (= 2.14-2+b2), liblsan0 (= 14.2.0-1), liblzma5 (= 5.6.2-2), libmagic-mgc (= 1:5.45-3), libmagic1t64 (= 1:5.45-3), libmd0 (= 1.1.0-2), libmodule-pluggable-perl (= 5.2-5), libmount1 (= 2.40.2-1), libmpc3 (= 1.3.1-1+b2), libmpfr6 (= 4.2.1-1+b1), libpam-modules (= 1.5.3-7), libpam-modules-bin (= 1.5.3-7), libpam-runtime (= 1.5.3-7), libpam0g (= 1.5.3-7), libparams-util-perl (= 1.102-3+b1), libpcre2-8-0 (= 10.42-4+b1), libperl5.40 (= 5.40.0-1), libpipeline1 (= 1.5.7-2), libquadmath0 (= 14.2.0-1), libseccomp2 (= 2.5.5-1+b1), libselinux1 (= 3.5-2+b3), libsframe1 (= 2.42.90.20240720-2), libsmartcols1 (= 2.40.2-1), libssl3t64 (= 3.3.1-2), libstdc++-14-dev (= 14.2.0-1), libstdc++6 (= 14.2.0-1), libsystemd0 (= 256.4-2), libtinfo6 (= 6.5-2), libtool (= 2.4.7-7), libtsan2 (= 14.2.0-1), libubsan1 (= 14.2.0-1), libuchardet0 (= 0.0.8-1+b1), libudev1 (= 256.4-2), libunistring5 (= 1.2-1), libuuid1 (= 2.40.2-1), libxml2 (= 2.12.7+dfsg-3+b1), libzstd1 (= 1.5.6+dfsg-1), linux-libc-dev (= 6.9.12-1), m4 (= 1.4.19-4), make (= 4.3-4.1), man-db (= 2.12.1-2), mawk (= 1.3.4.20240622-2), ncurses-base (= 6.5-2), ncurses-bin (= 6.5-2), patch (= 2.7.6-7), perl (= 5.40.0-1), perl-base (= 5.40.0-1), perl-modules-5.40 (= 5.40.0-1), po-debconf (= 1.0.21+nmu1), rpcsvc-proto (= 1.4.3-1), sed (= 4.9-2), sensible-utils (= 0.0.24), sysvinit-utils (= 3.09-2), tar (= 1.35+dfsg-3), usr-is-merged (= 39), util-linux (= 2.40.2-1), xz-utils (= 5.6.2-2), zlib1g (= 1:1.3.dfsg+really1.3.1-1) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" SOURCE_DATE_EPOCH="1603577606" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libsys-filesystem-perl_1.408-1_all.deb -------------------------------------- new Debian package, version 2.0. size 45056 bytes: control archive=1400 bytes. 696 bytes, 14 lines control 2137 bytes, 27 lines md5sums Package: libsys-filesystem-perl Version: 1.408-1 Architecture: all Maintainer: Debian Perl Group Installed-Size: 125 Depends: perl:any, libmodule-pluggable-perl, libparams-util-perl Section: perl Priority: optional Homepage: https://metacpan.org/release/Sys-Filesystem Description: Perl module to retrieve list of filesystems and their properties Sys::Filesystem is intended to be a portable interface to list and query filesystem names and their properties. It hopes to provide a consistent API to list all, mounted, unmounted and special filesystems on a system, and query as many properties as possible with common aliases wherever possible. drwxr-xr-x root/root 0 2020-10-24 22:13 ./ drwxr-xr-x root/root 0 2020-10-24 22:13 ./usr/ drwxr-xr-x root/root 0 2020-10-24 22:13 ./usr/share/ drwxr-xr-x root/root 0 2020-10-24 22:13 ./usr/share/doc/ drwxr-xr-x root/root 0 2020-10-24 22:13 ./usr/share/doc/libsys-filesystem-perl/ -rw-r--r-- root/root 909 2020-10-24 22:13 ./usr/share/doc/libsys-filesystem-perl/changelog.Debian.gz -rw-r--r-- root/root 3118 2020-10-21 12:02 ./usr/share/doc/libsys-filesystem-perl/changelog.gz -rw-r--r-- root/root 1892 2020-10-24 22:13 ./usr/share/doc/libsys-filesystem-perl/copyright drwxr-xr-x root/root 0 2020-10-24 22:13 ./usr/share/man/ drwxr-xr-x root/root 0 2020-10-24 22:13 ./usr/share/man/man3/ -rw-r--r-- root/root 4917 2020-10-24 22:13 ./usr/share/man/man3/Sys::Filesystem.3pm.gz -rw-r--r-- root/root 2424 2020-10-24 22:13 ./usr/share/man/man3/Sys::Filesystem::Aix.3pm.gz -rw-r--r-- root/root 1382 2020-10-24 22:13 ./usr/share/man/man3/Sys::Filesystem::Cygwin.3pm.gz -rw-r--r-- root/root 1794 2020-10-24 22:13 ./usr/share/man/man3/Sys::Filesystem::Darwin.3pm.gz -rw-r--r-- root/root 1167 2020-10-24 22:13 ./usr/share/man/man3/Sys::Filesystem::Dummy.3pm.gz -rw-r--r-- root/root 1617 2020-10-24 22:13 ./usr/share/man/man3/Sys::Filesystem::Freebsd.3pm.gz -rw-r--r-- root/root 1145 2020-10-24 22:13 ./usr/share/man/man3/Sys::Filesystem::Hpux.3pm.gz -rw-r--r-- root/root 2782 2020-10-24 22:13 ./usr/share/man/man3/Sys::Filesystem::Linux.3pm.gz -rw-r--r-- root/root 1367 2020-10-24 22:13 ./usr/share/man/man3/Sys::Filesystem::Mswin32.3pm.gz -rw-r--r-- root/root 1541 2020-10-24 22:13 ./usr/share/man/man3/Sys::Filesystem::Netbsd.3pm.gz -rw-r--r-- root/root 1511 2020-10-24 22:13 ./usr/share/man/man3/Sys::Filesystem::Solaris.3pm.gz -rw-r--r-- root/root 1887 2020-10-24 22:13 ./usr/share/man/man3/Sys::Filesystem::Unix.3pm.gz drwxr-xr-x root/root 0 2020-10-24 22:13 ./usr/share/perl5/ drwxr-xr-x root/root 0 2020-10-24 22:13 ./usr/share/perl5/Sys/ -rw-r--r-- root/root 17693 2020-10-21 11:57 ./usr/share/perl5/Sys/Filesystem.pm drwxr-xr-x root/root 0 2020-10-24 22:13 ./usr/share/perl5/Sys/Filesystem/ -rw-r--r-- root/root 9958 2020-10-21 11:57 ./usr/share/perl5/Sys/Filesystem/Aix.pm -rw-r--r-- root/root 3343 2020-10-21 11:57 ./usr/share/perl5/Sys/Filesystem/Cygwin.pm -rw-r--r-- root/root 5977 2020-10-21 11:57 ./usr/share/perl5/Sys/Filesystem/Darwin.pm -rw-r--r-- root/root 1891 2020-10-21 11:57 ./usr/share/perl5/Sys/Filesystem/Dummy.pm -rw-r--r-- root/root 4858 2020-10-21 11:57 ./usr/share/perl5/Sys/Filesystem/Freebsd.pm -rw-r--r-- root/root 2654 2020-10-21 11:57 ./usr/share/perl5/Sys/Filesystem/Hpux.pm -rw-r--r-- root/root 7398 2020-10-21 11:57 ./usr/share/perl5/Sys/Filesystem/Linux.pm -rw-r--r-- root/root 3889 2020-10-21 11:57 ./usr/share/perl5/Sys/Filesystem/Mswin32.pm -rw-r--r-- root/root 3475 2020-10-21 11:57 ./usr/share/perl5/Sys/Filesystem/Netbsd.pm -rw-r--r-- root/root 3602 2020-10-21 11:57 ./usr/share/perl5/Sys/Filesystem/Solaris.pm -rw-r--r-- root/root 9705 2020-10-21 11:57 ./usr/share/perl5/Sys/Filesystem/Unix.pm +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 924 Build-Time: 3 Distribution: perl-5.40-throwaway Host Architecture: amd64 Install-Time: 4 Job: /srv/debomatic/incoming/libsys-filesystem-perl_1.408-1.dsc Machine Architecture: amd64 Package: libsys-filesystem-perl Package-Time: 14 Source-Version: 1.408-1 Space: 924 Status: successful Version: 1.408-1 -------------------------------------------------------------------------------- Finished at 2024-08-04T12:42:06Z Build needed 00:00:14, 924k disk space