sbuild (Debian sbuild) 0.85.10 (30 May 2024) on carme.larted.org.uk +==============================================================================+ | libmail-srs-perl 0.31-9 (amd64) Sun, 15 Sep 2024 20:22:42 +0000 | +==============================================================================+ Package: libmail-srs-perl Version: 0.31-9 Source Version: 0.31-9 Distribution: perl-5.40-throwaway Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: NOTICE: Log filtering will replace 'var/run/schroot/mount/perl-5.40-amd64-debomatic-907d9025-6954-47d0-b1b1-b2838e3a805b' with '<>' +------------------------------------------------------------------------------+ | Chroot Setup Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libmail-srs-perl_0.31-9 perl-5.40-throwaway amd64 ------------------------------------------------------------------------------------------------------------------------ I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libmail-srs-perl_0.31-9 perl-5.40-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: NOTICE: Log filtering will replace 'build/libmail-srs-perl-6RIg6Y/resolver-J5qVxT' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.40 InRelease [3042 B] Hit:2 http://deb.debian.org/debian unstable InRelease Get:1 file:/srv/reprepro perl-5.40 InRelease [3042 B] Ign:3 http://localhost:3142/debian sid InRelease Hit:3 http://localhost:3142/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/libmail-srs-perl_0.31-9.dsc exists in /srv/debomatic/incoming; copying to chroot I: NOTICE: Log filtering will replace 'build/libmail-srs-perl-6RIg6Y/libmail-srs-perl-0.31' with '<>' I: NOTICE: Log filtering will replace 'build/libmail-srs-perl-6RIg6Y' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 13), build-essential, fakeroot, perl, libdigest-hmac-perl, libmldbm-perl, libtest-pod-perl, libtest-pod-coverage-perl Filtered Build-Depends: debhelper-compat (= 13), build-essential, fakeroot, perl, libdigest-hmac-perl, libmldbm-perl, libtest-pod-perl, libtest-pod-coverage-perl dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [609 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [724 B] Get:5 copy:/<>/apt_archive ./ Packages [736 B] Fetched 2069 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libdevel-symdump-perl libdigest-hmac-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libmldbm-perl libpipeline1 libpod-coverage-perl libpod-parser-perl libtest-pod-coverage-perl libtest-pod-perl libtool libuchardet0 libxml2 m4 man-db po-debconf sensible-utils Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev groff libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libarchive-cpio-perl libfreezethaw-perl libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libdevel-symdump-perl libdigest-hmac-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libmldbm-perl libpipeline1 libpod-coverage-perl libpod-parser-perl libtest-pod-coverage-perl libtest-pod-perl libtool libuchardet0 libxml2 m4 man-db po-debconf sbuild-build-depends-main-dummy sensible-utils 0 upgraded, 39 newly installed, 0 to remove and 0 not upgraded. Need to get 20.1 MB of archives. After this operation, 76.2 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [920 B] Get:2 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get:3 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.45-3 [42.9 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.40.2-8 [97.3 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.13.0-1 [1420 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.19-4 [287 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.72-3 [493 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.22.5-2 [723 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.20 [89.7 kB] Get:18 http://deb.debian.org/debian unstable/main amd64 libtool all 2.4.7-7 [517 kB] Get:19 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get:20 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:21 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get:22 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get:23 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.191-2 [188 kB] Get:24 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get:25 http://deb.debian.org/debian unstable/main amd64 libicu72 amd64 72.1-5 [9396 kB] Get:26 http://deb.debian.org/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg-3+b1 [671 kB] Get:27 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get:28 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:29 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get:30 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.20 [915 kB] Get:31 http://deb.debian.org/debian unstable/main amd64 libfakeroot amd64 1.36-1 [29.1 kB] Get:32 http://deb.debian.org/debian unstable/main amd64 fakeroot amd64 1.36-1 [75.1 kB] Get:33 http://deb.debian.org/debian unstable/main amd64 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get:34 http://deb.debian.org/debian unstable/main amd64 libdigest-hmac-perl all 1.04+dfsg-2 [9316 B] Get:35 http://deb.debian.org/debian unstable/main amd64 libmldbm-perl all 2.05-4 [16.8 kB] Get:36 http://deb.debian.org/debian unstable/main amd64 libpod-parser-perl all 1.67-1 [94.1 kB] Get:37 http://deb.debian.org/debian unstable/main amd64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get:38 http://deb.debian.org/debian unstable/main amd64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get:39 http://deb.debian.org/debian unstable/main amd64 libtest-pod-perl all 1.52-3 [12.6 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 20.1 MB in 0s (119 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 22986 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-8_amd64.deb ... Unpacking bsdextrautils (2.40.2-8) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.191-2_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5_amd64.deb ... Unpacking libicu72:amd64 (72.1-5) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg-3+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg-3+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Selecting previously unselected package libfakeroot:amd64. Preparing to unpack .../29-libfakeroot_1.36-1_amd64.deb ... Unpacking libfakeroot:amd64 (1.36-1) ... Selecting previously unselected package fakeroot. Preparing to unpack .../30-fakeroot_1.36-1_amd64.deb ... Unpacking fakeroot (1.36-1) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../31-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libdigest-hmac-perl. Preparing to unpack .../32-libdigest-hmac-perl_1.04+dfsg-2_all.deb ... Unpacking libdigest-hmac-perl (1.04+dfsg-2) ... Selecting previously unselected package libmldbm-perl. Preparing to unpack .../33-libmldbm-perl_2.05-4_all.deb ... Unpacking libmldbm-perl (2.05-4) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../34-libpod-parser-perl_1.67-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.67-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../35-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../36-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../37-libtest-pod-perl_1.52-3_all.deb ... Unpacking libtest-pod-perl (1.52-3) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../38-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-5) ... Setting up bsdextrautils (2.40.2-8) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up libtest-pod-perl (1.52-3) ... Setting up libmldbm-perl (2.05-4) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libfakeroot:amd64 (1.36-1) ... Setting up libelf1t64:amd64 (0.191-2) ... Setting up fakeroot (1.36-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode Setting up autotools-dev (20220109.1) ... Setting up libdigest-hmac-perl (1.04+dfsg-2) ... Setting up libpod-parser-perl (1.67-1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libxml2:amd64 (2.12.7+dfsg-3+b1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.20) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.40-2) ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 6.9.7-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.9.7-1 (2024-06-27) amd64 (x86_64) Toolchain package versions: binutils_2.43.1-4 dpkg-dev_1.22.11 g++-13_13.3.0-6 g++-14_14.2.0-4 gcc-13_13.3.0-6 gcc-14_14.2.0-4 libc6-dev_2.40-2 libstdc++-13-dev_13.3.0-6 libstdc++-14-dev_14.2.0-4 libstdc++6_14.2.0-4 linux-libc-dev_6.10.9-1 Package versions: adduser_3.137 apt_2.9.8 autoconf_2.72-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.5 base-passwd_3.6.4 bash_5.2.32-1+b1 binutils_2.43.1-4 binutils-common_2.43.1-4 binutils-x86-64-linux-gnu_2.43.1-4 bsdextrautils_2.40.2-8 bsdutils_1:2.40.2-8 build-essential_12.10 bzip2_1.0.8-6 coreutils_9.4-3.1 cpp_4:14.1.0-2 cpp-13_13.3.0-6 cpp-13-x86-64-linux-gnu_13.3.0-6 cpp-14_14.2.0-4 cpp-14-x86-64-linux-gnu_14.2.0-4 cpp-x86-64-linux-gnu_4:14.1.0-2 dash_0.5.12-9 debconf_1.5.87 debhelper_13.20 debian-archive-keyring_2023.4 debianutils_5.20 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffutils_1:3.10-1 dirmngr_2.2.43-8+b1 dpkg_1.22.11 dpkg-dev_1.22.11 dwz_0.15-1+b1 eatmydata_131-2 fakeroot_1.36-1 file_1:5.45-3 findutils_4.10.0-3 g++_4:14.1.0-2 g++-13_13.3.0-6 g++-13-x86-64-linux-gnu_13.3.0-6 g++-14_14.2.0-4 g++-14-x86-64-linux-gnu_14.2.0-4 g++-x86-64-linux-gnu_4:14.1.0-2 gcc_4:14.1.0-2 gcc-13_13.3.0-6 gcc-13-base_13.3.0-6 gcc-13-x86-64-linux-gnu_13.3.0-6 gcc-14_14.2.0-4 gcc-14-base_14.2.0-4 gcc-14-x86-64-linux-gnu_14.2.0-4 gcc-x86-64-linux-gnu_4:14.1.0-2 gettext_0.22.5-2 gettext-base_0.22.5-2 gnupg_2.2.43-8 gnupg-l10n_2.2.43-8 gnupg-utils_2.2.43-8+b1 gpg_2.2.43-8+b1 gpg-agent_2.2.43-8+b1 gpg-wks-client_2.2.43-8+b1 gpgconf_2.2.43-8+b1 gpgsm_2.2.43-8+b1 gpgv_2.2.43-8+b1 grep_3.11-4 groff-base_1.23.0-5 gzip_1.12-1.1 hostname_3.23+nmu2 init-system-helpers_1.66 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-2 libapt-pkg6.0t64_2.9.8 libarchive-zip-perl_1.68-1 libasan8_14.2.0-4 libassuan0_2.5.6-1+b1 libassuan9_3.0.1-2 libatomic1_14.2.0-4 libattr1_1:2.5.2-1 libaudit-common_1:4.0.1-1 libaudit1_1:4.0.1-1 libbinutils_2.43.1-4 libblkid1_2.40.2-8 libbsd0_0.12.2-1 libbz2-1.0_1.0.8-6 libc-bin_2.40-2 libc-dev-bin_2.40-2 libc-l10n_2.40-2 libc6_2.40-2 libc6-dev_2.40-2 libcap-ng0_0.8.5-2 libcap2_1:2.66-5 libcc1-0_14.2.0-4 libcrypt-dev_1:4.4.36-5 libcrypt1_1:4.4.36-5 libctf-nobfd0_2.43.1-4 libctf0_2.43.1-4 libdb5.3t64_5.3.28+dfsg2-7 libdebconfclient0_0.272 libdebhelper-perl_13.20 libdevel-symdump-perl_2.18-5 libdigest-hmac-perl_1.04+dfsg-2 libdpkg-perl_1.22.11 libeatmydata1_131-2 libelf1t64_0.191-2 libfakeroot_1.36-1 libffi8_3.4.6-1 libfile-stripnondeterminism-perl_1.14.0-1 libgcc-13-dev_13.3.0-6 libgcc-14-dev_14.2.0-4 libgcc-s1_14.2.0-4 libgcrypt20_1.11.0-6 libgdbm-compat4t64_1.24-2 libgdbm6t64_1.24-2 libgmp10_2:6.3.0+dfsg-2+b1 libgnutls30t64_3.8.6-2 libgomp1_14.2.0-4 libgpg-error0_1.50-3 libgprofng0_2.43.1-4 libhogweed6t64_3.10-1 libhwasan0_14.2.0-4 libicu72_72.1-5 libidn2-0_2.3.7-2 libisl23_0.27-1 libitm1_14.2.0-4 libjansson4_2.14-2+b2 libksba8_1.6.7-2 libldap-2.5-0_2.5.18+dfsg-3+b1 liblsan0_14.2.0-4 liblz4-1_1.9.4-3 liblzma5_5.6.2-2 libmagic-mgc_1:5.45-3 libmagic1t64_1:5.45-3 libmd0_1.1.0-2 libmldbm-perl_2.05-4 libmount1_2.40.2-8 libmpc3_1.3.1-1+b2 libmpfr6_4.2.1-1+b1 libncursesw6_6.5-2 libnettle8t64_3.10-1 libnpth0t64_1.6-3.1 libp11-kit0_0.25.5-2 libpam-modules_1.5.3-7 libpam-modules-bin_1.5.3-7 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7 libpcre2-8-0_10.42-4+b1 libperl5.38t64_5.38.2-5 libperl5.40_5.40.0-5 libpipeline1_1.5.8-1 libpod-coverage-perl_0.23-2 libpod-parser-perl_1.67-1 libquadmath0_14.2.0-4 libreadline8t64_8.2-5 libsasl2-2_2.1.28+dfsg1-8 libsasl2-modules-db_2.1.28+dfsg1-8 libseccomp2_2.5.5-1+b1 libselinux1_3.7-3 libsemanage-common_3.7-2 libsemanage2_3.7-2 libsepol2_3.7-1 libsframe1_2.43.1-4 libsmartcols1_2.40.2-8 libsqlite3-0_3.46.1-1 libssl3t64_3.3.2-1 libstdc++-13-dev_13.3.0-6 libstdc++-14-dev_14.2.0-4 libstdc++6_14.2.0-4 libsystemd0_256.6-1 libtasn1-6_4.19.0-3+b2 libtest-pod-coverage-perl_1.10-3 libtest-pod-perl_1.52-3 libtinfo6_6.5-2 libtool_2.4.7-7 libtsan2_14.2.0-4 libubsan1_14.2.0-4 libuchardet0_0.0.8-1+b1 libudev1_256.6-1 libunistring5_1.2-1 libuuid1_2.40.2-8 libxml2_2.12.7+dfsg-3+b1 libxxhash0_0.8.2-2+b1 libzstd1_1.5.6+dfsg-1 linux-libc-dev_6.10.9-1 locales-all_2.40-2 login_1:4.16.0-2+really2.40.2-8 login.defs_1:4.16.0-4 m4_1.4.19-4 make_4.3-4.1 man-db_2.13.0-1 mawk_1.3.4.20240905-1 ncurses-base_6.5-2 ncurses-bin_6.5-2 openssl-provider-legacy_3.3.2-1 passwd_1:4.16.0-4 patch_2.7.6-7 perl_5.40.0-5 perl-base_5.40.0-5 perl-modules-5.38_5.38.2-5 perl-modules-5.40_5.40.0-5 pinentry-curses_1.2.1-4+b1 po-debconf_1.0.21+nmu1 readline-common_8.2-5 rpcsvc-proto_1.4.3-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2 sensible-utils_0.0.24 sysvinit-utils_3.10-2 tar_1.35+dfsg-3 usr-is-merged_39 util-linux_2.40.2-8 xz-utils_5.6.2-2 zlib1g_1:1.3.dfsg+really1.3.1-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libmail-srs-perl Binary: libmail-srs-perl, srs Architecture: all Version: 0.31-9 Maintainer: Debian Perl Group Uploaders: gregor herrmann , Ansgar Burchardt Homepage: https://metacpan.org/release/Mail-SRS Standards-Version: 4.1.3 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libmail-srs-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libmail-srs-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: perl, libdigest-hmac-perl, libmldbm-perl, libtest-pod-perl, libtest-pod-coverage-perl Package-List: libmail-srs-perl deb perl optional arch=all srs deb mail optional arch=all Checksums-Sha1: 983a25f85fd822277e73a8bfea07ef7a5024b365 26630 libmail-srs-perl_0.31.orig.tar.gz dda176a4ec56448631475cea809bf6c4d6843d84 3120 libmail-srs-perl_0.31-9.debian.tar.xz Checksums-Sha256: cea326558c58e92503bfce5d5b16a9231acc276652abc20c31701272979dbf57 26630 libmail-srs-perl_0.31.orig.tar.gz bc3c8dce18138e8172e6f920e7682f8aea8e2ce6606f0e561afeef0f1a2c2455 3120 libmail-srs-perl_0.31-9.debian.tar.xz Files: 8ff65ed841dfc3aab80272671ddd833e 26630 libmail-srs-perl_0.31.orig.tar.gz e527a902e2bd109dfc084d92cfaf4c62 3120 libmail-srs-perl_0.31-9.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmODaDEACgkQV5wWDUye I+iTJhAAgOd2SbPjcYv9YC71SKVnitStpGL8OO4K26eEW4n4i2Y7Em2C1rIZT3Bf b4uIZT6aIw72o0R48eWX3Jcizq7oip4Ls7ASwIEcCVQkksPD/k/oCnZJfeZbB187 kyCF7feqAt1UFWRTQpe2TpBfyFsVp3Jyszp77ZdW3CXk0IfNydC9i6Uyi7REfl/Y LU7B4gCDqhULX1vC6DERlgBQ6lzSztXtU4/+MdLljr4G5awlS5IAuhM2Zs89mPKg /kwNqtg7PGdA+tCODIOK74qF2pzKz/lk/y3rRJhRsuJPL7osgeJX8aBrGA2Uj/Pf lj003Hc+v+eeqcy5FB207gN9o6xyiaINUdKk6A9cxEf6cyMMzf+hc0HSp5C9Z1vc iuI36SKGVD7DG5E8IF3Zh8jddtbUwLzy4w7/OPaBnZzdKbMw0WoEE/W4s4aN6NP6 Yg1zF2CRSU4asyBkm6vJGGJpit/2MvheoUEaBkW9Q4YpgtKFgMPpBPEHvLq9ptYb bBDajE1HnKBsgv/5cCjRQjxxGtIjza6d0CGRgBD+bQs3X42zmEawCIYTws4wbqql 2D1KtEzmpHVa9CRCwP2pkmEmqdXjJgSHwemVv+xyORzCT6Y9PeKH05+S06mpvKC7 kXTC71jdSWSzUJoQea1eczJFHsHm3HoxC3GoR9gsMvEOtXN4ztc= =MnVE -----END PGP SIGNATURE----- gpgv: Signature made Sun Nov 27 13:37:53 2022 UTC gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libmail-srs-perl_0.31-9.dsc: no acceptable signature found dpkg-source: info: extracting libmail-srs-perl in /<> dpkg-source: info: unpacking libmail-srs-perl_0.31.orig.tar.gz dpkg-source: info: unpacking libmail-srs-perl_0.31-9.debian.tar.xz Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Timed Build Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libmail-srs-perl_0.31-9 perl-5.40-throwaway amd64 ------------------------------------------------------------------------------------------------------------------------ I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libmail-srs-perl_0.31-9 perl-5.40-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANG=en_GB.UTF-8 LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=perl-5.40-throwaway-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.40-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.40-amd64-debomatic-907d9025-6954-47d0-b1b1-b2838e3a805b SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -rfakeroot -Zxz dpkg-buildpackage: info: source package libmail-srs-perl dpkg-buildpackage: info: source version 0.31-9 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 debian/rules clean dh clean dh_clean dpkg-source -Zxz -b . dpkg-source: info: using source format '3.0 (quilt)' dpkg-source: info: building libmail-srs-perl using existing ./libmail-srs-perl_0.31.orig.tar.gz dpkg-source: info: building libmail-srs-perl in libmail-srs-perl_0.31-9.debian.tar.xz dpkg-source: info: building libmail-srs-perl in libmail-srs-perl_0.31-9.dsc debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Do you want to install 'srs', the SRS command line interface? [y] y Do you want to install 'srsd', the SRS address translation daemon? [y] y Do you want to install 'srsc', the SRS daemon commandline client? [y] y Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Mail::SRS Writing MYMETA.yml and MYMETA.json dh_auto_build make -j2 make[1]: Entering directory '/<>' cp lib/Mail/SRS/Shortcut.pm blib/lib/Mail/SRS/Shortcut.pm cp lib/Mail/SRS/DB.pm blib/lib/Mail/SRS/DB.pm cp lib/Mail/SRS/Reversable.pm blib/lib/Mail/SRS/Reversable.pm cp lib/Mail/SRS.pm blib/lib/Mail/SRS.pm cp lib/Mail/SRS/Guarded.pm blib/lib/Mail/SRS/Guarded.pm cp lib/Mail/SRS/Daemon.pm blib/lib/Mail/SRS/Daemon.pm cp lib/Mail/SRS/Reversible.pm blib/lib/Mail/SRS/Reversible.pm cp srs blib/script/srs cp srsc blib/script/srsc "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/srs "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/srsc cp srsd blib/script/srsd "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/srsd Manifying 3 pod documents Manifying 6 pod documents make[1]: Leaving directory '/<>' dh_auto_test make -j2 test TEST_VERBOSE=1 make[1]: Entering directory '/<>' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01_basic.t ......... 1..22 ok 1 - use Mail::SRS; ok 2 - Created an object ok 3 - An object of class 'Mail::SRS::Guarded' isa 'Mail::SRS' ok 4 - Secret was stored OK ok 5 - Secret was updated OK ok 6 - Old secret was preserved ok 7 - Hashing seems to work ok 8 - Hashes verify OK ok 9 - Bad hashes fail hash verify ok 10 - Wrong data fails hash verify ok 11 - Created a timestamp ok 12 - Timestamp is 2 characters ok 13 - Timestamp verifies ok 14 - Past timestamp is OK ok 15 - Antique timestamp fails ok 16 - Future timestamp fails ok 17 - Future timestamp fails ok 18 - Timestamp verifies ok 19 - Past timestamp is OK ok 20 - Antique timestamp ignored ok 21 - Future timestamp ignored ok 22 - Future timestamp ignored ok t/02_guarded.t ....... 1..35 ok 1 - use Mail::SRS; ok 2 - Created an object ok 3 - An object of class 'Mail::SRS::Guarded' isa 'Mail::SRS' ok 4 - An object of class 'Mail::SRS::Guarded' isa 'Mail::SRS::Shortcut' ok 5 - An object of class 'Mail::SRS::Guarded' isa 'Mail::SRS::Guarded' ok 6 - Can still call methods on new object ok 7 - Made a new address ok 8 - It is an SRS0 address ok 9 - Reversed the address ok 10 - The reversal was idempotent ok 11 - Made another new address with the SRS address ok 12 - It is an SRS1 address ok 13 - It is not an SRS0 address ok 14 - Reversed the address again ok 15 - It is the original SRS0 address ok 16 - Got back the original sender ok 17 - Error detected reversing garbage ok 18 - Trapped a hashless SRS1 address! ok 19 - Reversed a hashless SRS1 address ok 20 - Idempotent on user@domain-with-dash.com ok 21 - Idempotent on SRS0=GzLw=QN=domain-with-dash.com=user@host0.tld0 ok 22 - Idempotent from same domain ok 23 - AlwaysRewrite works from same domain ok 24 - Idempotent on user-with-dash@domain.com ok 25 - Idempotent on SRS0=ZudO=QN=domain.com=user-with-dash@host0.tld0 ok 26 - Idempotent from same domain ok 27 - AlwaysRewrite works from same domain ok 28 - Idempotent on user+with+plus@domain.com ok 29 - Idempotent on SRS0=9zrN=QN=domain.com=user+with+plus@host0.tld0 ok 30 - Idempotent from same domain ok 31 - AlwaysRewrite works from same domain ok 32 - Idempotent on user%with!everything&everything=@domain.somewhere ok 33 - Idempotent on SRS0=dIMg=QN=domain.somewhere=user%with!everything&everything=@host0.tld0 ok 34 - Idempotent from same domain ok 35 - AlwaysRewrite works from same domain ok t/03_reversible.t .... 1..13 ok 1 - use Mail::SRS::Reversible; ok 2 - Created an object ok 3 - An object of class 'Mail::SRS::Reversible' isa 'Mail::SRS' ok 4 - An object of class 'Mail::SRS::Reversible' isa 'Mail::SRS::Reversible' ok 5 - Can still call methods on new object ok 6 - Made a new address ok 7 - It is an SRS address ok 8 - Reversed the address ok 9 - The reversal was idempotent ok 10 - Made another new address with the SRS address ok 11 - It is an SRS address ok 12 - Reversed the address again ok 13 - The reversal was idempotent again ok t/04_dbm.t ........... 1..14 ok 1 - use Mail::SRS::DB; ok 2 - Created an object ok 3 - An object of class 'Mail::SRS::DB' isa 'Mail::SRS' ok 4 - An object of class 'Mail::SRS::DB' isa 'Mail::SRS::DB' ok 5 - Can still call methods on new object ok 6 - Made a new address ok 7 - It is an SRS address ok 8 - Reversed the address ok 9 - The reversal was idempotent ok 10 - Made another new address with the SRS address ok 11 - It is an SRS address ok 12 - Reversed the address again ok 13 - The reversal was idempotent again ok 14 - The reversal was idempotent over store ok t/05_shortcut.t ...... 1..17 ok 1 - use Mail::SRS::Shortcut; ok 2 - Created an object ok 3 - An object of class 'Mail::SRS::Shortcut' isa 'Mail::SRS' ok 4 - An object of class 'Mail::SRS::Shortcut' isa 'Mail::SRS::Shortcut' ok 5 - Can still call methods on new object ok 6 - Made a new address ok 7 - It is an SRS address ok 8 - Reversed the address ok 9 - The reversal was idempotent ok 10 - Made another new address with the SRS address ok 11 - It is an SRS address ok 12 - Reversed the address again ok 13 - Got back the original sender ok 14 - Idempotent on user@domain-with-dash.com ok 15 - Idempotent on user-with-dash@domain.com ok 16 - Idempotent on user+with+plus@domain.com ok 17 - Idempotent on user%with!everything&everything=@domain.somewhere ok t/06_separator.t ..... 1..65 ok 1 - use Mail::SRS; ok 2 - Created an object ok 3 - Got the expected separator ok 4 - It uses the right initial separator ok 5 - Reversed the address ok 6 - The reversal was idempotent ok 7 - Made another new address with the SRS address ok 8 - It uses the right initial separator too ok 9 - Reversed the address again ok 10 - Got an SRS0 address ok 11 - It is the original SRS0 address ok 12 - Got back the original sender ok 13 - Idempotent on user@domain-with-dash.com ok 14 - Idempotent on SRS0-GzLw=QN=domain-with-dash.com=user@host0.tld0 ok 15 - Idempotent on user-with-dash@domain.com ok 16 - Idempotent on SRS0-ZudO=QN=domain.com=user-with-dash@host0.tld0 ok 17 - Idempotent on user+with+plus@domain.com ok 18 - Idempotent on SRS0-9zrN=QN=domain.com=user+with+plus@host0.tld0 ok 19 - Idempotent on user=with=equals@domain.com ok 20 - Idempotent on SRS0-HUTo=QN=domain.com=user=with=equals@host0.tld0 ok 21 - Idempotent on user%with!everything&everything=@domain.somewhere ok 22 - Idempotent on SRS0-dIMg=QN=domain.somewhere=user%with!everything&everything=@host0.tld0 ok 23 - Created an object ok 24 - Got the expected separator ok 25 - It uses the right initial separator ok 26 - Reversed the address ok 27 - The reversal was idempotent ok 28 - Made another new address with the SRS address ok 29 - It uses the right initial separator too ok 30 - Reversed the address again ok 31 - Got an SRS0 address ok 32 - It is the original SRS0 address ok 33 - Got back the original sender ok 34 - Idempotent on user@domain-with-dash.com ok 35 - Idempotent on SRS0+GzLw=QN=domain-with-dash.com=user@host0.tld0 ok 36 - Idempotent on user-with-dash@domain.com ok 37 - Idempotent on SRS0+ZudO=QN=domain.com=user-with-dash@host0.tld0 ok 38 - Idempotent on user+with+plus@domain.com ok 39 - Idempotent on SRS0+9zrN=QN=domain.com=user+with+plus@host0.tld0 ok 40 - Idempotent on user=with=equals@domain.com ok 41 - Idempotent on SRS0+HUTo=QN=domain.com=user=with=equals@host0.tld0 ok 42 - Idempotent on user%with!everything&everything=@domain.somewhere ok 43 - Idempotent on SRS0+dIMg=QN=domain.somewhere=user%with!everything&everything=@host0.tld0 ok 44 - Created an object ok 45 - Got the expected separator ok 46 - It uses the right initial separator ok 47 - Reversed the address ok 48 - The reversal was idempotent ok 49 - Made another new address with the SRS address ok 50 - It uses the right initial separator too ok 51 - Reversed the address again ok 52 - Got an SRS0 address ok 53 - It is the original SRS0 address ok 54 - Got back the original sender ok 55 - Idempotent on user@domain-with-dash.com ok 56 - Idempotent on SRS0=GzLw=QN=domain-with-dash.com=user@host0.tld0 ok 57 - Idempotent on user-with-dash@domain.com ok 58 - Idempotent on SRS0=ZudO=QN=domain.com=user-with-dash@host0.tld0 ok 59 - Idempotent on user+with+plus@domain.com ok 60 - Idempotent on SRS0=9zrN=QN=domain.com=user+with+plus@host0.tld0 ok 61 - Idempotent on user=with=equals@domain.com ok 62 - Idempotent on SRS0=HUTo=QN=domain.com=user=with=equals@host0.tld0 ok 63 - Idempotent on user%with!everything&everything=@domain.somewhere ok 64 - Idempotent on SRS0=dIMg=QN=domain.somewhere=user%with!everything&everything=@host0.tld0 ok 65 - Failed to create object with bad separator ok t/07_varysep.t ....... 1..44 ok 1 - use Mail::SRS; ok 2 - use Mail::SRS::Guarded; ok 3 - use Mail::SRS::Reversible; ok 4 - use Mail::SRS::Shortcut; ok 5 - Idempotent on user@domain-with-dash.com ok 6 - S2 idempotent on SRS0+GzLw=QN=domain-with-dash.com=user@host.com ok 7 - Guarded S3 idempotent on SRS1-zJdI=host.com=+GzLw=QN=domain-with-dash.com=user@forwarder.com ok 8 - Idempotent on user-with-dash@domain.com ok 9 - S2 idempotent on SRS0+ZudO=QN=domain.com=user-with-dash@host.com ok 10 - Guarded S3 idempotent on SRS1-I5ry=host.com=+ZudO=QN=domain.com=user-with-dash@forwarder.com ok 11 - Idempotent on user+with+plus@domain.com ok 12 - S2 idempotent on SRS0+9zrN=QN=domain.com=user+with+plus@host.com ok 13 - Guarded S3 idempotent on SRS1-tzOY=host.com=+9zrN=QN=domain.com=user+with+plus@forwarder.com ok 14 - Idempotent on user=with=equals@domain.com ok 15 - S2 idempotent on SRS0+HUTo=QN=domain.com=user=with=equals@host.com ok 16 - Guarded S3 idempotent on SRS1-iM5Q=host.com=+HUTo=QN=domain.com=user=with=equals@forwarder.com ok 17 - Idempotent on user%with!everything&everything=@domain.somewhere ok 18 - S2 idempotent on SRS0+dIMg=QN=domain.somewhere=user%with!everything&everything=@host.com ok 19 - Guarded S3 idempotent on SRS1-Omqo=host.com=+dIMg=QN=domain.somewhere=user%with!everything&everything=@forwarder.com ok 20 - Idempotent on user@domain-with-dash.com ok 21 - S2 idempotent on SRS0+GzLw=QN=domain-with-dash.com=user@host.com ok 22 - Reversible S3 idempotent on SRS0-oj72=QN=host.com=SRS0+GzLw=QN=domain-with-dash.com=user@forwarder.com ok 23 - Idempotent on user-with-dash@domain.com ok 24 - S2 idempotent on SRS0+ZudO=QN=domain.com=user-with-dash@host.com ok 25 - Reversible S3 idempotent on SRS0-jVRq=QN=host.com=SRS0+ZudO=QN=domain.com=user-with-dash@forwarder.com ok 26 - Idempotent on user+with+plus@domain.com ok 27 - S2 idempotent on SRS0+9zrN=QN=domain.com=user+with+plus@host.com ok 28 - Reversible S3 idempotent on SRS0-LjvZ=QN=host.com=SRS0+9zrN=QN=domain.com=user+with+plus@forwarder.com ok 29 - Idempotent on user=with=equals@domain.com ok 30 - S2 idempotent on SRS0+HUTo=QN=domain.com=user=with=equals@host.com ok 31 - Reversible S3 idempotent on SRS0-ywpt=QN=host.com=SRS0+HUTo=QN=domain.com=user=with=equals@forwarder.com ok 32 - Idempotent on user%with!everything&everything=@domain.somewhere ok 33 - S2 idempotent on SRS0+dIMg=QN=domain.somewhere=user%with!everything&everything=@host.com ok 34 - Reversible S3 idempotent on SRS0-IVxl=QN=host.com=SRS0+dIMg=QN=domain.somewhere=user%with!everything&everything=@forwarder.com ok 35 - Idempotent on user@domain-with-dash.com ok 36 - Shortcut S2 idempotent on user@domain-with-dash.com ok 37 - Idempotent on user-with-dash@domain.com ok 38 - Shortcut S2 idempotent on user-with-dash@domain.com ok 39 - Idempotent on user+with+plus@domain.com ok 40 - Shortcut S2 idempotent on user+with+plus@domain.com ok 41 - Idempotent on user=with=equals@domain.com ok 42 - Shortcut S2 idempotent on user=with=equals@domain.com ok 43 - Idempotent on user%with!everything&everything=@domain.somewhere ok 44 - Shortcut S2 idempotent on user%with!everything&everything=@domain.somewhere ok t/08_caseless.t ...... 1..34 ok 1 - use Mail::SRS; ok 2 - use Mail::SRS::Guarded; ok 3 - use Mail::SRS::Reversible; ok 4 - use Mail::SRS::Shortcut; ok 5 - Idempotent on User@domain-with-dash.com ok 6 - S2 idempotent on srs0+gzlw=qn=domain-with-dash.com=user@host.com ok 7 - Idempotent on User-with-dash@domain.com ok 8 - S2 idempotent on srs0+zudo=qn=domain.com=user-with-dash@host.com ok 9 - Idempotent on User+with+plus@domain.com ok 10 - S2 idempotent on srs0+9zrn=qn=domain.com=user+with+plus@host.com ok 11 - Idempotent on User=with=equals@domain.com ok 12 - S2 idempotent on srs0+huto=qn=domain.com=user=with=equals@host.com ok 13 - Idempotent on User%with!everything&everything=@domain.somewhere ok 14 - S2 idempotent on srs0+dimg=qn=domain.somewhere=user%with!everything&everything=@host.com ok 15 - Idempotent on User@domain-with-dash.com ok 16 - S2 idempotent on srs0+gzlw=qn=domain-with-dash.com=user@host.com ok 17 - Idempotent on User-with-dash@domain.com ok 18 - S2 idempotent on srs0+zudo=qn=domain.com=user-with-dash@host.com ok 19 - Idempotent on User+with+plus@domain.com ok 20 - S2 idempotent on srs0+9zrn=qn=domain.com=user+with+plus@host.com ok 21 - Idempotent on User=with=equals@domain.com ok 22 - S2 idempotent on srs0+huto=qn=domain.com=user=with=equals@host.com ok 23 - Idempotent on User%with!everything&everything=@domain.somewhere ok 24 - S2 idempotent on srs0+dimg=qn=domain.somewhere=user%with!everything&everything=@host.com ok 25 - Idempotent on User@domain-with-dash.com ok 26 - Shortcut S2 idempotent on User@domain-with-dash.com ok 27 - Idempotent on User-with-dash@domain.com ok 28 - Shortcut S2 idempotent on User-with-dash@domain.com ok 29 - Idempotent on User+with+plus@domain.com ok 30 - Shortcut S2 idempotent on User+with+plus@domain.com ok 31 - Idempotent on User=with=equals@domain.com ok 32 - Shortcut S2 idempotent on User=with=equals@domain.com ok 33 - Idempotent on User%with!everything&everything=@domain.somewhere ok 34 - Shortcut S2 idempotent on User%with!everything&everything=@domain.somewhere ok t/10_pod.t ........... 1..10 ok 1 - POD test for blib/lib/Mail/SRS.pm ok 2 - POD test for blib/lib/Mail/SRS/Guarded.pm ok 3 - POD test for blib/lib/Mail/SRS/Reversible.pm ok 4 - POD test for blib/lib/Mail/SRS/Reversable.pm (no pod) ok 5 - POD test for blib/lib/Mail/SRS/Shortcut.pm ok 6 - POD test for blib/lib/Mail/SRS/Daemon.pm ok 7 - POD test for blib/lib/Mail/SRS/DB.pm ok 8 - POD test for blib/script/srsd ok 9 - POD test for blib/script/srsc ok 10 - POD test for blib/script/srs ok t/11_pod_coverage.t .. 1..5 ok 1 - Pod coverage on Mail::SRS ok 2 - Pod coverage on Mail::SRS::Guarded ok 3 - Pod coverage on Mail::SRS::DB ok 4 - Pod coverage on Mail::SRS::Reversible ok 5 - Pod coverage on Mail::SRS::Shortcut ok t/20_cmdline.t ....... 1..1 ok 1 - Parsed script! ok t/21_daemon.t ........ 1..3 ok 1 - use Mail::SRS::Daemon; ok 2 - Created an object ok 3 - An object of class 'Mail::SRS::Daemon' isa 'Mail::SRS::Daemon' ok All tests successful. Files=12, Tests=263, 1 wallclock secs ( 0.03 usr 0.02 sys + 0.62 cusr 0.15 csys = 0.82 CPU) Result: PASS make[1]: Leaving directory '/<>' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install make -j2 install DESTDIR=/<>/debian/tmp AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/<>' Manifying 3 pod documents Manifying 6 pod documents Installing /<>/debian/tmp/usr/share/perl5/Mail/SRS.pm Installing /<>/debian/tmp/usr/share/perl5/Mail/SRS/Guarded.pm Installing /<>/debian/tmp/usr/share/perl5/Mail/SRS/Reversible.pm Installing /<>/debian/tmp/usr/share/perl5/Mail/SRS/Reversable.pm Installing /<>/debian/tmp/usr/share/perl5/Mail/SRS/Shortcut.pm Installing /<>/debian/tmp/usr/share/perl5/Mail/SRS/Daemon.pm Installing /<>/debian/tmp/usr/share/perl5/Mail/SRS/DB.pm Installing /<>/debian/tmp/usr/share/man/man1/srs.1p Installing /<>/debian/tmp/usr/share/man/man1/srsc.1p Installing /<>/debian/tmp/usr/share/man/man1/srsd.1p Installing /<>/debian/tmp/usr/share/man/man3/Mail::SRS::Reversible.3pm Installing /<>/debian/tmp/usr/share/man/man3/Mail::SRS::DB.3pm Installing /<>/debian/tmp/usr/share/man/man3/Mail::SRS::Guarded.3pm Installing /<>/debian/tmp/usr/share/man/man3/Mail::SRS.3pm Installing /<>/debian/tmp/usr/share/man/man3/Mail::SRS::Daemon.3pm Installing /<>/debian/tmp/usr/share/man/man3/Mail::SRS::Shortcut.3pm Installing /<>/debian/tmp/usr/bin/srsd Installing /<>/debian/tmp/usr/bin/srsc Installing /<>/debian/tmp/usr/bin/srs make[1]: Leaving directory '/<>' dh_install dh_installdocs dh_installchangelogs debian/rules override_dh_installexamples make[1]: Entering directory '/<>' dh_installexamples sed -i '1s|^#!/sbin/runscript|#!/bin/sh|' /<>/debian/srs/usr/share/doc/srs/examples/gentoo/srsd make[1]: Leaving directory '/<>' dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dpkg-gencontrol: warning: package srs: substitution variable ${perl:Depends} unused, but is defined dh_md5sums dh_builddeb dpkg-deb: building package 'libmail-srs-perl' in '../libmail-srs-perl_0.31-9_all.deb'. dpkg-deb: building package 'srs' in '../srs_0.31-9_all.deb'. dpkg-genbuildinfo -O../libmail-srs-perl_0.31-9_amd64.buildinfo dpkg-genchanges -O../libmail-srs-perl_0.31-9_amd64.changes dpkg-genchanges: info: not including original source code in upload dpkg-source -Zxz --after-build . dpkg-buildpackage: info: binary and diff upload (original source NOT included) -------------------------------------------------------------------------------- Build finished at 2024-09-15T20:22:58Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ libmail-srs-perl_0.31-9_amd64.changes: -------------------------------------- Format: 1.8 Date: Sun, 27 Nov 2022 13:37:14 +0000 Source: libmail-srs-perl Binary: libmail-srs-perl srs Architecture: source all Version: 0.31-9 Distribution: perl-5.40-throwaway Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libmail-srs-perl - interface to Sender Rewriting Scheme srs - command-line Sender Rewriting Scheme client Changes: libmail-srs-perl (0.31-9) unstable; urgency=medium . [ Debian Janitor ] * Apply multi-arch hints. + srs: Add Multi-Arch: foreign. Checksums-Sha1: af4abd4f579dafbe3c5e2dae7343a4fe51bc731c 1351 libmail-srs-perl_0.31-9.dsc e072bdb38bd8f399e6682e777296a909aeecfd9a 3128 libmail-srs-perl_0.31-9.debian.tar.xz 0bfd448743949760195c394729242bb08177b4d3 30920 libmail-srs-perl_0.31-9_all.deb 0a06ae98c7b7bd607a4d7bc38d475a990420485a 5491 libmail-srs-perl_0.31-9_amd64.buildinfo 87c652191f4bbb42a266270be130dd084f33003f 14672 srs_0.31-9_all.deb Checksums-Sha256: 05d3782a0c55e65874f0c93776bc9a5aa8c31351c8389412227a0f1572afe7b3 1351 libmail-srs-perl_0.31-9.dsc 17d28c3e39314c182a0be66a37a77590b6ced6a1465dd2dc64223d94bb78b6ed 3128 libmail-srs-perl_0.31-9.debian.tar.xz 56f83af3b51db1fd02a59e832992934c91097a452d6ea7a39128ab85f22d541d 30920 libmail-srs-perl_0.31-9_all.deb 6d03eb7579832f516578e024af6718797953e8746806455450e86be51ba43b8e 5491 libmail-srs-perl_0.31-9_amd64.buildinfo a6305a1d93b5f883a7b6985721260b94c71d6932a1e9f0ad0321588a8dc012d1 14672 srs_0.31-9_all.deb Files: c7cbd6c3b62060630e63fe038b7c919e 1351 perl optional libmail-srs-perl_0.31-9.dsc 4abb45ae814664e1c215508a25caeeae 3128 perl optional libmail-srs-perl_0.31-9.debian.tar.xz c0822b268a66f3e5114c245a5bcd561c 30920 perl optional libmail-srs-perl_0.31-9_all.deb 31a810aea41e175b0e24b9772d5a286c 5491 perl optional libmail-srs-perl_0.31-9_amd64.buildinfo bd315a50f08435ec8587b32487818236 14672 mail optional srs_0.31-9_all.deb +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: libmail-srs-perl Binary: libmail-srs-perl srs Architecture: all source Version: 0.31-9 Checksums-Md5: c7cbd6c3b62060630e63fe038b7c919e 1351 libmail-srs-perl_0.31-9.dsc c0822b268a66f3e5114c245a5bcd561c 30920 libmail-srs-perl_0.31-9_all.deb bd315a50f08435ec8587b32487818236 14672 srs_0.31-9_all.deb Checksums-Sha1: af4abd4f579dafbe3c5e2dae7343a4fe51bc731c 1351 libmail-srs-perl_0.31-9.dsc 0bfd448743949760195c394729242bb08177b4d3 30920 libmail-srs-perl_0.31-9_all.deb 87c652191f4bbb42a266270be130dd084f33003f 14672 srs_0.31-9_all.deb Checksums-Sha256: 05d3782a0c55e65874f0c93776bc9a5aa8c31351c8389412227a0f1572afe7b3 1351 libmail-srs-perl_0.31-9.dsc 56f83af3b51db1fd02a59e832992934c91097a452d6ea7a39128ab85f22d541d 30920 libmail-srs-perl_0.31-9_all.deb a6305a1d93b5f883a7b6985721260b94c71d6932a1e9f0ad0321588a8dc012d1 14672 srs_0.31-9_all.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Sun, 15 Sep 2024 20:22:58 +0000 Build-Path: /<> Build-Tainted-By: merged-usr-via-aliased-dirs usr-local-has-programs Installed-Build-Depends: autoconf (= 2.72-3), automake (= 1:1.16.5-1.3), autopoint (= 0.22.5-2), autotools-dev (= 20220109.1), base-files (= 13.5), base-passwd (= 3.6.4), bash (= 5.2.32-1+b1), binutils (= 2.43.1-4), binutils-common (= 2.43.1-4), binutils-x86-64-linux-gnu (= 2.43.1-4), bsdextrautils (= 2.40.2-8), bsdutils (= 1:2.40.2-8), build-essential (= 12.10), bzip2 (= 1.0.8-6), coreutils (= 9.4-3.1), cpp (= 4:14.1.0-2), cpp-13 (= 13.3.0-6), cpp-13-x86-64-linux-gnu (= 13.3.0-6), cpp-14 (= 14.2.0-4), cpp-14-x86-64-linux-gnu (= 14.2.0-4), cpp-x86-64-linux-gnu (= 4:14.1.0-2), dash (= 0.5.12-9), debconf (= 1.5.87), debhelper (= 13.20), debianutils (= 5.20), dh-autoreconf (= 20), dh-strip-nondeterminism (= 1.14.0-1), diffutils (= 1:3.10-1), dpkg (= 1.22.11), dpkg-dev (= 1.22.11), dwz (= 0.15-1+b1), file (= 1:5.45-3), findutils (= 4.10.0-3), g++ (= 4:14.1.0-2), g++-14 (= 14.2.0-4), g++-14-x86-64-linux-gnu (= 14.2.0-4), g++-x86-64-linux-gnu (= 4:14.1.0-2), gcc (= 4:14.1.0-2), gcc-13 (= 13.3.0-6), gcc-13-base (= 13.3.0-6), gcc-13-x86-64-linux-gnu (= 13.3.0-6), gcc-14 (= 14.2.0-4), gcc-14-base (= 14.2.0-4), gcc-14-x86-64-linux-gnu (= 14.2.0-4), gcc-x86-64-linux-gnu (= 4:14.1.0-2), gettext (= 0.22.5-2), gettext-base (= 0.22.5-2), grep (= 3.11-4), groff-base (= 1.23.0-5), gzip (= 1.12-1.1), hostname (= 3.23+nmu2), init-system-helpers (= 1.66), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.3.2-2), libarchive-zip-perl (= 1.68-1), libasan8 (= 14.2.0-4), libatomic1 (= 14.2.0-4), libattr1 (= 1:2.5.2-1), libaudit-common (= 1:4.0.1-1), libaudit1 (= 1:4.0.1-1), libbinutils (= 2.43.1-4), libblkid1 (= 2.40.2-8), libbz2-1.0 (= 1.0.8-6), libc-bin (= 2.40-2), libc-dev-bin (= 2.40-2), libc6 (= 2.40-2), libc6-dev (= 2.40-2), libcap-ng0 (= 0.8.5-2), libcap2 (= 1:2.66-5), libcc1-0 (= 14.2.0-4), libcrypt-dev (= 1:4.4.36-5), libcrypt1 (= 1:4.4.36-5), libctf-nobfd0 (= 2.43.1-4), libctf0 (= 2.43.1-4), libdb5.3t64 (= 5.3.28+dfsg2-7), libdebconfclient0 (= 0.272), libdebhelper-perl (= 13.20), libdevel-symdump-perl (= 2.18-5), libdigest-hmac-perl (= 1.04+dfsg-2), libdpkg-perl (= 1.22.11), libelf1t64 (= 0.191-2), libfile-stripnondeterminism-perl (= 1.14.0-1), libgcc-13-dev (= 13.3.0-6), libgcc-14-dev (= 14.2.0-4), libgcc-s1 (= 14.2.0-4), libgdbm-compat4t64 (= 1.24-2), libgdbm6t64 (= 1.24-2), libgmp10 (= 2:6.3.0+dfsg-2+b1), libgomp1 (= 14.2.0-4), libgprofng0 (= 2.43.1-4), libhwasan0 (= 14.2.0-4), libicu72 (= 72.1-5), libisl23 (= 0.27-1), libitm1 (= 14.2.0-4), libjansson4 (= 2.14-2+b2), liblsan0 (= 14.2.0-4), liblzma5 (= 5.6.2-2), libmagic-mgc (= 1:5.45-3), libmagic1t64 (= 1:5.45-3), libmd0 (= 1.1.0-2), libmldbm-perl (= 2.05-4), libmount1 (= 2.40.2-8), libmpc3 (= 1.3.1-1+b2), libmpfr6 (= 4.2.1-1+b1), libpam-modules (= 1.5.3-7), libpam-modules-bin (= 1.5.3-7), libpam-runtime (= 1.5.3-7), libpam0g (= 1.5.3-7), libpcre2-8-0 (= 10.42-4+b1), libperl5.40 (= 5.40.0-5), libpipeline1 (= 1.5.8-1), libpod-coverage-perl (= 0.23-2), libpod-parser-perl (= 1.67-1), libquadmath0 (= 14.2.0-4), libseccomp2 (= 2.5.5-1+b1), libselinux1 (= 3.7-3), libsframe1 (= 2.43.1-4), libsmartcols1 (= 2.40.2-8), libssl3t64 (= 3.3.2-1), libstdc++-14-dev (= 14.2.0-4), libstdc++6 (= 14.2.0-4), libsystemd0 (= 256.6-1), libtest-pod-coverage-perl (= 1.10-3), libtest-pod-perl (= 1.52-3), libtinfo6 (= 6.5-2), libtool (= 2.4.7-7), libtsan2 (= 14.2.0-4), libubsan1 (= 14.2.0-4), libuchardet0 (= 0.0.8-1+b1), libudev1 (= 256.6-1), libunistring5 (= 1.2-1), libuuid1 (= 2.40.2-8), libxml2 (= 2.12.7+dfsg-3+b1), libzstd1 (= 1.5.6+dfsg-1), linux-libc-dev (= 6.10.9-1), m4 (= 1.4.19-4), make (= 4.3-4.1), man-db (= 2.13.0-1), mawk (= 1.3.4.20240905-1), ncurses-base (= 6.5-2), ncurses-bin (= 6.5-2), openssl-provider-legacy (= 3.3.2-1), patch (= 2.7.6-7), perl (= 5.40.0-5), perl-base (= 5.40.0-5), perl-modules-5.40 (= 5.40.0-5), po-debconf (= 1.0.21+nmu1), rpcsvc-proto (= 1.4.3-1), sed (= 4.9-2), sensible-utils (= 0.0.24), sysvinit-utils (= 3.10-2), tar (= 1.35+dfsg-3), usr-is-merged (= 39), util-linux (= 2.40.2-8), xz-utils (= 5.6.2-2), zlib1g (= 1:1.3.dfsg+really1.3.1-1) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" SOURCE_DATE_EPOCH="1669556234" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libmail-srs-perl_0.31-9_all.deb ------------------------------- new Debian package, version 2.0. size 30920 bytes: control archive=1180 bytes. 807 bytes, 20 lines control 1106 bytes, 15 lines md5sums Package: libmail-srs-perl Version: 0.31-9 Architecture: all Maintainer: Debian Perl Group Installed-Size: 74 Depends: perl:any, libdigest-hmac-perl, libmldbm-perl Section: perl Priority: optional Multi-Arch: foreign Homepage: https://metacpan.org/release/Mail-SRS Description: interface to Sender Rewriting Scheme The Sender Rewriting Scheme preserves .forward functionality in an SPF-compliant world. . SPF requires the SMTP client IP to match the envelope sender (return-path). When a message is forwarded through an intermediate server, that intermediate server may need to rewrite the return-path to remain SPF compliant. If the message bounces, that intermediate server needs to validate the bounce and forward the bounce to the original sender. drwxr-xr-x root/root 0 2022-11-27 13:37 ./ drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/ drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/ drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/doc/ drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/doc/libmail-srs-perl/ -rw-r--r-- root/root 892 2022-11-27 13:37 ./usr/share/doc/libmail-srs-perl/changelog.Debian.gz -rw-r--r-- root/root 1083 2022-11-27 13:37 ./usr/share/doc/libmail-srs-perl/copyright drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/man/ drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/man/man3/ -rw-r--r-- root/root 8182 2022-11-27 13:37 ./usr/share/man/man3/Mail::SRS.3pm.gz -rw-r--r-- root/root 1204 2022-11-27 13:37 ./usr/share/man/man3/Mail::SRS::DB.3pm.gz -rw-r--r-- root/root 2335 2022-11-27 13:37 ./usr/share/man/man3/Mail::SRS::Daemon.3pm.gz -rw-r--r-- root/root 1371 2022-11-27 13:37 ./usr/share/man/man3/Mail::SRS::Guarded.3pm.gz -rw-r--r-- root/root 1041 2022-11-27 13:37 ./usr/share/man/man3/Mail::SRS::Reversible.3pm.gz -rw-r--r-- root/root 1166 2022-11-27 13:37 ./usr/share/man/man3/Mail::SRS::Shortcut.3pm.gz drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/perl5/ drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/perl5/Mail/ -rw-r--r-- root/root 22563 2004-10-19 15:49 ./usr/share/perl5/Mail/SRS.pm drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/perl5/Mail/SRS/ -rw-r--r-- root/root 2144 2004-06-23 21:53 ./usr/share/perl5/Mail/SRS/DB.pm -rw-r--r-- root/root 6144 2004-06-23 21:53 ./usr/share/perl5/Mail/SRS/Daemon.pm -rw-r--r-- root/root 3014 2004-06-23 21:53 ./usr/share/perl5/Mail/SRS/Guarded.pm -rw-r--r-- root/root 130 2004-06-23 21:53 ./usr/share/perl5/Mail/SRS/Reversable.pm -rw-r--r-- root/root 1098 2004-06-23 21:53 ./usr/share/perl5/Mail/SRS/Reversible.pm -rw-r--r-- root/root 2708 2004-06-23 21:53 ./usr/share/perl5/Mail/SRS/Shortcut.pm srs_0.31-9_all.deb ------------------ new Debian package, version 2.0. size 14672 bytes: control archive=1124 bytes. 881 bytes, 24 lines control 753 bytes, 12 lines md5sums Package: srs Source: libmail-srs-perl Version: 0.31-9 Architecture: all Maintainer: Debian Perl Group Installed-Size: 43 Depends: libmail-srs-perl Section: mail Priority: optional Multi-Arch: foreign Homepage: https://metacpan.org/release/Mail-SRS Description: command-line Sender Rewriting Scheme client The Sender Rewriting Scheme preserves .forward functionality in an SPF-compliant world. . SPF requires the SMTP client IP to match the envelope sender (return-path). When a message is forwarded through an intermediate server, that intermediate server may need to rewrite the return-path to remain SPF compliant. If the message bounces, that intermediate server needs to validate the bounce and forward the bounce to the original sender. . This package contains the srs client that can be used in your .forward files. drwxr-xr-x root/root 0 2022-11-27 13:37 ./ drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/ drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/bin/ -rwxr-xr-x root/root 4995 2022-11-27 13:37 ./usr/bin/srs -rwxr-xr-x root/root 983 2022-11-27 13:37 ./usr/bin/srsc -rwxr-xr-x root/root 3587 2022-11-27 13:37 ./usr/bin/srsd drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/ drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/doc/ drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/doc/srs/ -rw-r--r-- root/root 892 2022-11-27 13:37 ./usr/share/doc/srs/changelog.Debian.gz -rw-r--r-- root/root 1083 2022-11-27 13:37 ./usr/share/doc/srs/copyright drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/doc/srs/examples/ -rw-r--r-- root/root 2188 2004-06-23 21:53 ./usr/share/doc/srs/examples/Limit.pm drwxr-xr-x root/root 0 2004-10-19 15:49 ./usr/share/doc/srs/examples/exim/ -rw-r--r-- root/root 1755 2004-06-23 21:53 ./usr/share/doc/srs/examples/exim/srs.conf drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/doc/srs/examples/gentoo/ -rwxr-xr-x root/root 445 2022-11-27 13:37 ./usr/share/doc/srs/examples/gentoo/srsd -rw-r--r-- root/root 5678 2004-06-23 21:53 ./usr/share/doc/srs/examples/teach.pl drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/man/ drwxr-xr-x root/root 0 2022-11-27 13:37 ./usr/share/man/man1/ -rw-r--r-- root/root 2031 2022-11-27 13:37 ./usr/share/man/man1/srs.1p.gz -rw-r--r-- root/root 1220 2022-11-27 13:37 ./usr/share/man/man1/srsc.1p.gz -rw-r--r-- root/root 1995 2022-11-27 13:37 ./usr/share/man/man1/srsd.1p.gz +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 1100 Build-Time: 3 Distribution: perl-5.40-throwaway Host Architecture: amd64 Install-Time: 4 Job: /srv/debomatic/incoming/libmail-srs-perl_0.31-9.dsc Machine Architecture: amd64 Package: libmail-srs-perl Package-Time: 16 Source-Version: 0.31-9 Space: 1100 Status: successful Version: 0.31-9 -------------------------------------------------------------------------------- Finished at 2024-09-15T20:22:58Z Build needed 00:00:16, 1100k disk space