sbuild (Debian sbuild) 0.85.10 (30 May 2024) on carme.larted.org.uk +==============================================================================+ | libformat-human-bytes-perl 0.06-2 (amd64) Sun, 04 Aug 2024 07:33:17 +0000 | +==============================================================================+ Package: libformat-human-bytes-perl Version: 0.06-2 Source Version: 0.06-2 Distribution: perl-5.40-throwaway Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: NOTICE: Log filtering will replace 'var/run/schroot/mount/perl-5.40-amd64-debomatic-4293e0c4-91af-4dd7-9043-7c5e2ca4a5b1' with '<>' +------------------------------------------------------------------------------+ | Chroot Setup Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libformat-human-bytes-perl_0.06-2 perl-5.40-throwaway amd64 ---------------------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libformat-human-bytes-perl_0.06-2 perl-5.40-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: NOTICE: Log filtering will replace 'build/libformat-human-bytes-perl-WAXEMf/resolver-GME6Ti' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.40 InRelease [3042 B] Hit:2 http://deb.debian.org/debian unstable InRelease Hit:3 http://localhost:3142/debian sid InRelease Get:1 file:/srv/reprepro perl-5.40 InRelease [3042 B] Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/libformat-human-bytes-perl_0.06-2.dsc exists in /srv/debomatic/incoming; copying to chroot I: NOTICE: Log filtering will replace 'build/libformat-human-bytes-perl-WAXEMf/libformat-human-bytes-perl-0.06' with '<>' I: NOTICE: Log filtering will replace 'build/libformat-human-bytes-perl-WAXEMf' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 13), libmodule-install-perl, build-essential, fakeroot, perl Filtered Build-Depends: debhelper-compat (= 13), libmodule-install-perl, build-essential, fakeroot, perl dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [609 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [667 B] Get:5 copy:/<>/apt_archive ./ Packages [679 B] Fetched 1955 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libfakeroot libfile-remove-perl libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libmodule-install-perl libmodule-scandeps-perl libpipeline1 libtool libuchardet0 libxml2 libyaml-tiny-perl m4 man-db po-debconf sensible-utils Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev groff libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libarchive-cpio-perl libfile-homedir-perl libjson-perl libpar-dist-perl libwww-perl libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libfakeroot libfile-remove-perl libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libmodule-install-perl libmodule-scandeps-perl libpipeline1 libtool libuchardet0 libxml2 libyaml-tiny-perl m4 man-db po-debconf sbuild-build-depends-main-dummy sensible-utils 0 upgraded, 36 newly installed, 0 to remove and 0 not upgraded. Need to get 19.9 MB of archives. After this operation, 76.0 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [900 B] Get:2 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get:3 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.45-3 [42.9 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.40.2-1 [96.1 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.7-2 [38.0 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.12.1-2 [1411 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.19-4 [287 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.71-3 [332 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.22.5-2 [723 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.16 [88.6 kB] Get:18 http://deb.debian.org/debian unstable/main amd64 libtool all 2.4.7-7 [517 kB] Get:19 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get:20 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:21 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get:22 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get:23 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.191-2 [188 kB] Get:24 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get:25 http://deb.debian.org/debian unstable/main amd64 libicu72 amd64 72.1-5 [9396 kB] Get:26 http://deb.debian.org/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg-3+b1 [671 kB] Get:27 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get:28 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:29 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get:30 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.16 [891 kB] Get:31 http://deb.debian.org/debian unstable/main amd64 libfakeroot amd64 1.35.1-1 [28.6 kB] Get:32 http://deb.debian.org/debian unstable/main amd64 fakeroot amd64 1.35.1-1 [74.5 kB] Get:33 http://deb.debian.org/debian unstable/main amd64 libfile-remove-perl all 1.61-2 [16.1 kB] Get:34 http://deb.debian.org/debian unstable/main amd64 libmodule-scandeps-perl all 1.35-1 [43.7 kB] Get:35 http://deb.debian.org/debian unstable/main amd64 libyaml-tiny-perl all 1.74-1 [30.7 kB] Get:36 http://deb.debian.org/debian unstable/main amd64 libmodule-install-perl all 1.21-2 [139 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 19.9 MB in 0s (153 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 22966 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-1_amd64.deb ... Unpacking bsdextrautils (2.40.2-1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.7-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-2_amd64.deb ... Unpacking man-db (2.12.1-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.16_all.deb ... Unpacking libdebhelper-perl (13.16) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.191-2_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5_amd64.deb ... Unpacking libicu72:amd64 (72.1-5) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg-3+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg-3+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.16_all.deb ... Unpacking debhelper (13.16) ... Selecting previously unselected package libfakeroot:amd64. Preparing to unpack .../29-libfakeroot_1.35.1-1_amd64.deb ... Unpacking libfakeroot:amd64 (1.35.1-1) ... Selecting previously unselected package fakeroot. Preparing to unpack .../30-fakeroot_1.35.1-1_amd64.deb ... Unpacking fakeroot (1.35.1-1) ... Selecting previously unselected package libfile-remove-perl. Preparing to unpack .../31-libfile-remove-perl_1.61-2_all.deb ... Unpacking libfile-remove-perl (1.61-2) ... Selecting previously unselected package libmodule-scandeps-perl. Preparing to unpack .../32-libmodule-scandeps-perl_1.35-1_all.deb ... Unpacking libmodule-scandeps-perl (1.35-1) ... Selecting previously unselected package libyaml-tiny-perl. Preparing to unpack .../33-libyaml-tiny-perl_1.74-1_all.deb ... Unpacking libyaml-tiny-perl (1.74-1) ... Selecting previously unselected package libmodule-install-perl. Preparing to unpack .../34-libmodule-install-perl_1.21-2_all.deb ... Unpacking libmodule-install-perl (1.21-2) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../35-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libfile-remove-perl (1.61-2) ... Setting up libpipeline1:amd64 (1.5.7-2) ... Setting up libicu72:amd64 (72.1-5) ... Setting up bsdextrautils (2.40.2-1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.16) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libyaml-tiny-perl (1.74-1) ... Setting up libfakeroot:amd64 (1.35.1-1) ... Setting up libelf1t64:amd64 (0.191-2) ... Setting up fakeroot (1.35.1-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libxml2:amd64 (2.12.7+dfsg-3+b1) ... Setting up libmodule-scandeps-perl (1.35-1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libmodule-install-perl (1.21-2) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.16) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.39-6) ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 6.9.7-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.9.7-1 (2024-06-27) amd64 (x86_64) Toolchain package versions: binutils_2.42.90.20240720-2 dpkg-dev_1.22.11 g++-13_13.3.0-4 g++-14_14.2.0-1 gcc-13_13.3.0-4 gcc-14_14.2.0-1 libc6-dev_2.39-6 libstdc++-13-dev_13.3.0-4 libstdc++-14-dev_14.2.0-1 libstdc++6_14.2.0-1 linux-libc-dev_6.9.12-1 Package versions: adduser_3.137 apt_2.9.7 autoconf_2.71-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.4 base-passwd_3.6.4 bash_5.2.21-2.1 binutils_2.42.90.20240720-2 binutils-common_2.42.90.20240720-2 binutils-x86-64-linux-gnu_2.42.90.20240720-2 bsdextrautils_2.40.2-1 bsdutils_1:2.40.2-1 build-essential_12.10 bzip2_1.0.8-5.1 coreutils_9.4-3.1 cpp_4:14.1.0-2 cpp-13_13.3.0-4 cpp-13-x86-64-linux-gnu_13.3.0-4 cpp-14_14.2.0-1 cpp-14-x86-64-linux-gnu_14.2.0-1 cpp-x86-64-linux-gnu_4:14.1.0-2 dash_0.5.12-9 debconf_1.5.87 debhelper_13.16 debian-archive-keyring_2023.4 debianutils_5.20 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffutils_1:3.10-1 dirmngr_2.2.43-8 dpkg_1.22.11 dpkg-dev_1.22.11 dwz_0.15-1+b1 eatmydata_131-2 fakeroot_1.35.1-1 file_1:5.45-3 findutils_4.10.0-2 g++_4:14.1.0-2 g++-13_13.3.0-4 g++-13-x86-64-linux-gnu_13.3.0-4 g++-14_14.2.0-1 g++-14-x86-64-linux-gnu_14.2.0-1 g++-x86-64-linux-gnu_4:14.1.0-2 gcc_4:14.1.0-2 gcc-13_13.3.0-4 gcc-13-base_13.3.0-4 gcc-13-x86-64-linux-gnu_13.3.0-4 gcc-14_14.2.0-1 gcc-14-base_14.2.0-1 gcc-14-x86-64-linux-gnu_14.2.0-1 gcc-x86-64-linux-gnu_4:14.1.0-2 gettext_0.22.5-2 gettext-base_0.22.5-2 gnupg_2.2.43-8 gnupg-l10n_2.2.43-8 gnupg-utils_2.2.43-8 gpg_2.2.43-8 gpg-agent_2.2.43-8 gpg-wks-client_2.2.43-8 gpgconf_2.2.43-8 gpgsm_2.2.43-8 gpgv_2.2.43-8 grep_3.11-4 groff-base_1.23.0-5 gzip_1.12-1.1 hostname_3.23+nmu2 init-system-helpers_1.66 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-2 libapt-pkg6.0t64_2.9.7 libarchive-zip-perl_1.68-1 libasan8_14.2.0-1 libassuan0_2.5.6-1+b1 libatomic1_14.2.0-1 libattr1_1:2.5.2-1 libaudit-common_1:3.1.2-4 libaudit1_1:3.1.2-4+b1 libbinutils_2.42.90.20240720-2 libblkid1_2.40.2-1 libbsd0_0.12.2-1 libbz2-1.0_1.0.8-5.1 libc-bin_2.39-6 libc-dev-bin_2.39-6 libc-l10n_2.39-6 libc6_2.39-6 libc6-dev_2.39-6 libcap-ng0_0.8.5-1+b1 libcap2_1:2.66-5 libcc1-0_14.2.0-1 libcrypt-dev_1:4.4.36-4 libcrypt1_1:4.4.36-4 libctf-nobfd0_2.42.90.20240720-2 libctf0_2.42.90.20240720-2 libdb5.3t64_5.3.28+dfsg2-7 libdebconfclient0_0.272 libdebhelper-perl_13.16 libdpkg-perl_1.22.11 libeatmydata1_131-2 libelf1t64_0.191-2 libfakeroot_1.35.1-1 libffi8_3.4.6-1 libfile-remove-perl_1.61-2 libfile-stripnondeterminism-perl_1.14.0-1 libgcc-13-dev_13.3.0-4 libgcc-14-dev_14.2.0-1 libgcc-s1_14.2.0-1 libgcrypt20_1.11.0-5 libgdbm-compat4t64_1.23-6 libgdbm6t64_1.23-6 libgmp10_2:6.3.0+dfsg-2+b1 libgnutls30t64_3.8.6-2 libgomp1_14.2.0-1 libgpg-error0_1.50-2 libgprofng0_2.42.90.20240720-2 libhogweed6t64_3.10-1 libhwasan0_14.2.0-1 libicu72_72.1-5 libidn2-0_2.3.7-2 libisl23_0.26-3+b2 libitm1_14.2.0-1 libjansson4_2.14-2+b2 libksba8_1.6.7-2 libldap-2.5-0_2.5.18+dfsg-2+b1 liblsan0_14.2.0-1 liblz4-1_1.9.4-3 liblzma5_5.6.2-2 libmagic-mgc_1:5.45-3 libmagic1t64_1:5.45-3 libmd0_1.1.0-2 libmodule-install-perl_1.21-2 libmodule-scandeps-perl_1.35-1 libmount1_2.40.2-1 libmpc3_1.3.1-1+b2 libmpfr6_4.2.1-1+b1 libncursesw6_6.5-2 libnettle8t64_3.10-1 libnpth0t64_1.6-3.1 libp11-kit0_0.25.5-2 libpam-modules_1.5.3-7 libpam-modules-bin_1.5.3-7 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7 libpcre2-8-0_10.42-4+b1 libperl5.38t64_5.38.2-5 libperl5.40_5.40.0-1 libpipeline1_1.5.7-2 libquadmath0_14.2.0-1 libreadline8t64_8.2-4 libsasl2-2_2.1.28+dfsg1-6 libsasl2-modules-db_2.1.28+dfsg1-6 libseccomp2_2.5.5-1+b1 libselinux1_3.5-2+b3 libsemanage-common_3.5-1 libsemanage2_3.5-1+b4 libsepol2_3.5-2+b1 libsframe1_2.42.90.20240720-2 libsmartcols1_2.40.2-1 libsqlite3-0_3.46.0-1 libssl3t64_3.3.1-2 libstdc++-13-dev_13.3.0-4 libstdc++-14-dev_14.2.0-1 libstdc++6_14.2.0-1 libsystemd0_256.4-2 libtasn1-6_4.19.0-3+b2 libtinfo6_6.5-2 libtool_2.4.7-7 libtsan2_14.2.0-1 libubsan1_14.2.0-1 libuchardet0_0.0.8-1+b1 libudev1_256.4-2 libunistring5_1.2-1 libuuid1_2.40.2-1 libxml2_2.12.7+dfsg-3+b1 libxxhash0_0.8.2-2+b1 libyaml-tiny-perl_1.74-1 libzstd1_1.5.6+dfsg-1 linux-libc-dev_6.9.12-1 locales-all_2.39-6 login_1:4.15.3-3 m4_1.4.19-4 make_4.3-4.1 man-db_2.12.1-2 mawk_1.3.4.20240622-2 ncurses-base_6.5-2 ncurses-bin_6.5-2 passwd_1:4.15.3-3 patch_2.7.6-7 perl_5.40.0-1 perl-base_5.40.0-1 perl-modules-5.38_5.38.2-5 perl-modules-5.40_5.40.0-1 pinentry-curses_1.2.1-3+b2 po-debconf_1.0.21+nmu1 readline-common_8.2-4 rpcsvc-proto_1.4.3-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2 sensible-utils_0.0.24 sysvinit-utils_3.09-2 tar_1.35+dfsg-3 usr-is-merged_39 util-linux_2.40.2-1 xz-utils_5.6.2-2 zlib1g_1:1.3.dfsg+really1.3.1-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libformat-human-bytes-perl Binary: libformat-human-bytes-perl Architecture: all Version: 0.06-2 Maintainer: Debian Perl Group Uploaders: Damyan Ivanov Homepage: https://metacpan.org/release/Format-Human-Bytes Standards-Version: 3.9.5 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libformat-human-bytes-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libformat-human-bytes-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13), libmodule-install-perl Build-Depends-Indep: perl Package-List: libformat-human-bytes-perl deb perl optional arch=all Checksums-Sha1: b5cb437941e5a66ff88c0984029aabe2cf1cc357 27183 libformat-human-bytes-perl_0.06.orig.tar.gz ec9439ba9962960cc1ec054797faaf78f9f7bfbc 2348 libformat-human-bytes-perl_0.06-2.debian.tar.xz Checksums-Sha256: 4d2578073748cc774b755f9805697221753b38154f0f57b7d820140128b4a9b1 27183 libformat-human-bytes-perl_0.06.orig.tar.gz 20bacb7a63724c61440af3c9f34e12728a99650cff82fd0eb0add471f5d4adf3 2348 libformat-human-bytes-perl_0.06-2.debian.tar.xz Files: 709e90c62599def49071735e842632c8 27183 libformat-human-bytes-perl_0.06.orig.tar.gz 96374cb0836e416e770b0e0aa00077cf 2348 libformat-human-bytes-perl_0.06-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKo8joACgkQV5wWDUye I+g70xAAkHY8CSVLq0g9UKHtBV30xxlOMrFyTSheJRK8Cx1nkwaUg0s02DG/Wz2/ qeQggjsBR143hKHm2uIEgKCHnkm3+KsGrvRJnwrlaB9vKnDzBEMSqlHd/vytjj4z EyhLptcrd0WgNIob8t+tJW34CFuQcU/R+SY/sDobYwoesiig+FWH5RIh6qpE2rw2 uuheaGEGOlSA7T7lTu+rIzPFgV71Q42Hua8gndxdNZMqV9OwCLcPHq7hF0Oeti3p Ie9W8hyfJSZNTruqgYIeql1K4+wDK0HSFQBjiFRsarxtDk626oO57g50ebjQoBID kKFZn0ts7QLciCQGiWkQsyFJvgs+j3Lw0qlYJ7vml0SvrkraJJc7YKxmaaUSDd5G ndxWMp625iAtEpofsR6j5zigQHYJQ3okwwCAwzb4l1bW6T2eUEN6Zooy2I6WPbiJ OMIAGepxGF2svvVb3kLCHL5LUOJo3grMCVt7OG7FFxA1yZiRv3GImez+84AyGZBc 5L3V0kFotR2LZaW55ssFWQRD+L5qNK32MWEV34iaiQX8xTR4mSKwTdC86ew6pl7N nnUq2UbZX+HXTuvwD5E/TPpBRo7aGfVWts2v/TXRNuhdiDqUHOzSfndDFQ/o1tAN oscERVVoqN2vdoAPQbuG2/fHBQQ8OoUNtoEAJGnM7G/P48RQNcs= =a+QF -----END PGP SIGNATURE----- gpgv: Signature made Tue Jun 14 20:40:26 2022 UTC gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libformat-human-bytes-perl_0.06-2.dsc: no acceptable signature found dpkg-source: info: extracting libformat-human-bytes-perl in /<> dpkg-source: info: unpacking libformat-human-bytes-perl_0.06.orig.tar.gz dpkg-source: info: unpacking libformat-human-bytes-perl_0.06-2.debian.tar.xz Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Timed Build Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libformat-human-bytes-perl_0.06-2 perl-5.40-throwaway amd64 ---------------------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libformat-human-bytes-perl_0.06-2 perl-5.40-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANG=en_GB.UTF-8 LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=perl-5.40-throwaway-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.40-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.40-amd64-debomatic-4293e0c4-91af-4dd7-9043-7c5e2ca4a5b1 SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -rfakeroot -Zxz dpkg-buildpackage: info: source package libformat-human-bytes-perl dpkg-buildpackage: info: source version 0.06-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean dh clean dh_clean dpkg-source -Zxz -b . dpkg-source: info: using source format '3.0 (quilt)' dpkg-source: info: building libformat-human-bytes-perl using existing ./libformat-human-bytes-perl_0.06.orig.tar.gz dpkg-source: info: building libformat-human-bytes-perl in libformat-human-bytes-perl_0.06-2.debian.tar.xz dpkg-source: info: building libformat-human-bytes-perl in libformat-human-bytes-perl_0.06-2.dsc debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" Cannot determine perl version info from lib/Format/Human/Bytes.pm *** Module::AutoInstall version 1.03 *** Checking for Perl dependencies... [Core Features] - Test::More ...loaded. (1.302199) *** Module::AutoInstall configuration finished. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Format::Human::Bytes Writing MYMETA.yml and MYMETA.json dh_auto_build make -j2 make[1]: Entering directory '/<>' cp lib/Format/Human/Bytes.pm blib/lib/Format/Human/Bytes.pm Manifying 1 pod document make[1]: Leaving directory '/<>' dh_auto_test make -j2 test TEST_VERBOSE=1 make[1]: Entering directory '/<>' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/00-load.t t/01-base2.t t/02-base10.t # Testing Format::Human::Bytes 0.06, Perl 5.040000, /usr/bin/perl t/00-load.t .... 1..1 ok 1 - use Format::Human::Bytes; ok t/01-base2.t ... 1..103 ok 1 - Create object ok 2 - Function, 0 decimals: = 0 ok 3 - Class method, 0 decimals: = 0 ok 4 - Object method, 0 decimals: = 0 ok 5 - Function, 1 decimals: = 0.0 ok 6 - Class method, 1 decimals: = 0.0 ok 7 - Object method, 1 decimals: = 0.0 ok 8 - Function, 2 decimals: = 0.00 ok 9 - Class method, 2 decimals: = 0.00 ok 10 - Object method, 2 decimals: = 0.00 ok 11 - Function, 0 decimals: 0 = 0 ok 12 - Class method, 0 decimals: 0 = 0 ok 13 - Object method, 0 decimals: 0 = 0 ok 14 - Function, 1 decimals: 0 = 0.0 ok 15 - Class method, 1 decimals: 0 = 0.0 ok 16 - Object method, 1 decimals: 0 = 0.0 ok 17 - Function, 2 decimals: 0 = 0.00 ok 18 - Class method, 2 decimals: 0 = 0.00 ok 19 - Object method, 2 decimals: 0 = 0.00 ok 20 - Function, 0 decimals: 1 = 1B ok 21 - Class method, 0 decimals: 1 = 1B ok 22 - Object method, 0 decimals: 1 = 1B ok 23 - Function, 1 decimals: 1 = 1.0B ok 24 - Class method, 1 decimals: 1 = 1.0B ok 25 - Object method, 1 decimals: 1 = 1.0B ok 26 - Function, 2 decimals: 1 = 1.00B ok 27 - Class method, 2 decimals: 1 = 1.00B ok 28 - Object method, 2 decimals: 1 = 1.00B ok 29 - Function, 0 decimals: 131072 = 128kB ok 30 - Class method, 0 decimals: 131072 = 128kB ok 31 - Object method, 0 decimals: 131072 = 128kB ok 32 - Function, 1 decimals: 131072 = 128.0kB ok 33 - Class method, 1 decimals: 131072 = 128.0kB ok 34 - Object method, 1 decimals: 131072 = 128.0kB ok 35 - Function, 0 decimals: 2048 = 2048B ok 36 - Class method, 0 decimals: 2048 = 2048B ok 37 - Object method, 0 decimals: 2048 = 2048B ok 38 - Function, 1 decimals: 2048 = 2048.0B ok 39 - Class method, 1 decimals: 2048 = 2048.0B ok 40 - Object method, 1 decimals: 2048 = 2048.0B ok 41 - Function, 0 decimals: 65536 = 64kB ok 42 - Class method, 0 decimals: 65536 = 64kB ok 43 - Object method, 0 decimals: 65536 = 64kB ok 44 - Function, 1 decimals: 65536 = 64.0kB ok 45 - Class method, 1 decimals: 65536 = 64.0kB ok 46 - Object method, 1 decimals: 65536 = 64.0kB ok 47 - Function, 2 decimals: 65536 = 64.00kB ok 48 - Class method, 2 decimals: 65536 = 64.00kB ok 49 - Object method, 2 decimals: 65536 = 64.00kB ok 50 - Function, 0 decimals: 900000 = 879kB ok 51 - Class method, 0 decimals: 900000 = 879kB ok 52 - Object method, 0 decimals: 900000 = 879kB ok 53 - Function, 1 decimals: 900000 = 878.9kB ok 54 - Class method, 1 decimals: 900000 = 878.9kB ok 55 - Object method, 1 decimals: 900000 = 878.9kB ok 56 - Function, 2 decimals: 900000 = 878.91kB ok 57 - Class method, 2 decimals: 900000 = 878.91kB ok 58 - Object method, 2 decimals: 900000 = 878.91kB ok 59 - Function, 3 decimals: 900000 = 878.906kB ok 60 - Class method, 3 decimals: 900000 = 878.906kB ok 61 - Object method, 3 decimals: 900000 = 878.906kB ok 62 - Function, 0 decimals: 900000000 = 858MB ok 63 - Class method, 0 decimals: 900000000 = 858MB ok 64 - Object method, 0 decimals: 900000000 = 858MB ok 65 - Function, 1 decimals: 900000000 = 858.3MB ok 66 - Class method, 1 decimals: 900000000 = 858.3MB ok 67 - Object method, 1 decimals: 900000000 = 858.3MB ok 68 - Function, 2 decimals: 900000000 = 858.31MB ok 69 - Class method, 2 decimals: 900000000 = 858.31MB ok 70 - Object method, 2 decimals: 900000000 = 858.31MB ok 71 - Function, 3 decimals: 900000000 = 858.307MB ok 72 - Class method, 3 decimals: 900000000 = 858.307MB ok 73 - Object method, 3 decimals: 900000000 = 858.307MB ok 74 - Function, 0 decimals: 900000000000 = 838GB ok 75 - Class method, 0 decimals: 900000000000 = 838GB ok 76 - Object method, 0 decimals: 900000000000 = 838GB ok 77 - Function, 1 decimals: 900000000000 = 838.2GB ok 78 - Class method, 1 decimals: 900000000000 = 838.2GB ok 79 - Object method, 1 decimals: 900000000000 = 838.2GB ok 80 - Function, 2 decimals: 900000000000 = 838.19GB ok 81 - Class method, 2 decimals: 900000000000 = 838.19GB ok 82 - Object method, 2 decimals: 900000000000 = 838.19GB ok 83 - Function, 3 decimals: 900000000000 = 838.190GB ok 84 - Class method, 3 decimals: 900000000000 = 838.190GB ok 85 - Object method, 3 decimals: 900000000000 = 838.190GB ok 86 - Function, 4 decimals: 900000000000 = 838.1903GB ok 87 - Class method, 4 decimals: 900000000000 = 838.1903GB ok 88 - Object method, 4 decimals: 900000000000 = 838.1903GB ok 89 - Function, 0 decimals: 900000000000000 = 819TB ok 90 - Class method, 0 decimals: 900000000000000 = 819TB ok 91 - Object method, 0 decimals: 900000000000000 = 819TB ok 92 - Function, 1 decimals: 900000000000000 = 818.5TB ok 93 - Class method, 1 decimals: 900000000000000 = 818.5TB ok 94 - Object method, 1 decimals: 900000000000000 = 818.5TB ok 95 - Function, 2 decimals: 900000000000000 = 818.55TB ok 96 - Class method, 2 decimals: 900000000000000 = 818.55TB ok 97 - Object method, 2 decimals: 900000000000000 = 818.55TB ok 98 - Function, 3 decimals: 900000000000000 = 818.545TB ok 99 - Class method, 3 decimals: 900000000000000 = 818.545TB ok 100 - Object method, 3 decimals: 900000000000000 = 818.545TB ok 101 - Function, 4 decimals: 900000000000000 = 818.5452TB ok 102 - Class method, 4 decimals: 900000000000000 = 818.5452TB ok 103 - Object method, 4 decimals: 900000000000000 = 818.5452TB ok t/02-base10.t .. 1..112 ok 1 - Create object ok 2 - Function, 0 decimals: = 0 ok 3 - Class method, 0 decimals: = 0 ok 4 - Object method, 0 decimals: = 0 ok 5 - Function, 1 decimals: = 0.0 ok 6 - Class method, 1 decimals: = 0.0 ok 7 - Object method, 1 decimals: = 0.0 ok 8 - Function, 2 decimals: = 0.00 ok 9 - Class method, 2 decimals: = 0.00 ok 10 - Object method, 2 decimals: = 0.00 ok 11 - Function, 0 decimals: 0 = 0 ok 12 - Class method, 0 decimals: 0 = 0 ok 13 - Object method, 0 decimals: 0 = 0 ok 14 - Function, 1 decimals: 0 = 0.0 ok 15 - Class method, 1 decimals: 0 = 0.0 ok 16 - Object method, 1 decimals: 0 = 0.0 ok 17 - Function, 2 decimals: 0 = 0.00 ok 18 - Class method, 2 decimals: 0 = 0.00 ok 19 - Object method, 2 decimals: 0 = 0.00 ok 20 - Function, 0 decimals: 1 = 1B ok 21 - Class method, 0 decimals: 1 = 1B ok 22 - Object method, 0 decimals: 1 = 1B ok 23 - Function, 1 decimals: 1 = 1.0B ok 24 - Class method, 1 decimals: 1 = 1.0B ok 25 - Object method, 1 decimals: 1 = 1.0B ok 26 - Function, 2 decimals: 1 = 1.00B ok 27 - Class method, 2 decimals: 1 = 1.00B ok 28 - Object method, 2 decimals: 1 = 1.00B ok 29 - Function, 0 decimals: 123456 = 123kB ok 30 - Class method, 0 decimals: 123456 = 123kB ok 31 - Object method, 0 decimals: 123456 = 123kB ok 32 - Function, 1 decimals: 123456 = 123.5kB ok 33 - Class method, 1 decimals: 123456 = 123.5kB ok 34 - Object method, 1 decimals: 123456 = 123.5kB ok 35 - Function, 2 decimals: 123456 = 123.46kB ok 36 - Class method, 2 decimals: 123456 = 123.46kB ok 37 - Object method, 2 decimals: 123456 = 123.46kB ok 38 - Function, 0 decimals: 131072 = 131kB ok 39 - Class method, 0 decimals: 131072 = 131kB ok 40 - Object method, 0 decimals: 131072 = 131kB ok 41 - Function, 1 decimals: 131072 = 131.1kB ok 42 - Class method, 1 decimals: 131072 = 131.1kB ok 43 - Object method, 1 decimals: 131072 = 131.1kB ok 44 - Function, 0 decimals: 2048 = 2048B ok 45 - Class method, 0 decimals: 2048 = 2048B ok 46 - Object method, 0 decimals: 2048 = 2048B ok 47 - Function, 1 decimals: 2048 = 2048.0B ok 48 - Class method, 1 decimals: 2048 = 2048.0B ok 49 - Object method, 1 decimals: 2048 = 2048.0B ok 50 - Function, 0 decimals: 65536 = 66kB ok 51 - Class method, 0 decimals: 65536 = 66kB ok 52 - Object method, 0 decimals: 65536 = 66kB ok 53 - Function, 1 decimals: 65536 = 65.5kB ok 54 - Class method, 1 decimals: 65536 = 65.5kB ok 55 - Object method, 1 decimals: 65536 = 65.5kB ok 56 - Function, 2 decimals: 65536 = 65.54kB ok 57 - Class method, 2 decimals: 65536 = 65.54kB ok 58 - Object method, 2 decimals: 65536 = 65.54kB ok 59 - Function, 0 decimals: 900000 = 900kB ok 60 - Class method, 0 decimals: 900000 = 900kB ok 61 - Object method, 0 decimals: 900000 = 900kB ok 62 - Function, 1 decimals: 900000 = 900.0kB ok 63 - Class method, 1 decimals: 900000 = 900.0kB ok 64 - Object method, 1 decimals: 900000 = 900.0kB ok 65 - Function, 2 decimals: 900000 = 900.00kB ok 66 - Class method, 2 decimals: 900000 = 900.00kB ok 67 - Object method, 2 decimals: 900000 = 900.00kB ok 68 - Function, 3 decimals: 900000 = 900.000kB ok 69 - Class method, 3 decimals: 900000 = 900.000kB ok 70 - Object method, 3 decimals: 900000 = 900.000kB ok 71 - Function, 0 decimals: 900000000 = 900MB ok 72 - Class method, 0 decimals: 900000000 = 900MB ok 73 - Object method, 0 decimals: 900000000 = 900MB ok 74 - Function, 1 decimals: 900000000 = 900.0MB ok 75 - Class method, 1 decimals: 900000000 = 900.0MB ok 76 - Object method, 1 decimals: 900000000 = 900.0MB ok 77 - Function, 2 decimals: 900000000 = 900.00MB ok 78 - Class method, 2 decimals: 900000000 = 900.00MB ok 79 - Object method, 2 decimals: 900000000 = 900.00MB ok 80 - Function, 3 decimals: 900000000 = 900.000MB ok 81 - Class method, 3 decimals: 900000000 = 900.000MB ok 82 - Object method, 3 decimals: 900000000 = 900.000MB ok 83 - Function, 0 decimals: 900000000000 = 900GB ok 84 - Class method, 0 decimals: 900000000000 = 900GB ok 85 - Object method, 0 decimals: 900000000000 = 900GB ok 86 - Function, 1 decimals: 900000000000 = 900.0GB ok 87 - Class method, 1 decimals: 900000000000 = 900.0GB ok 88 - Object method, 1 decimals: 900000000000 = 900.0GB ok 89 - Function, 2 decimals: 900000000000 = 900.00GB ok 90 - Class method, 2 decimals: 900000000000 = 900.00GB ok 91 - Object method, 2 decimals: 900000000000 = 900.00GB ok 92 - Function, 3 decimals: 900000000000 = 900.000GB ok 93 - Class method, 3 decimals: 900000000000 = 900.000GB ok 94 - Object method, 3 decimals: 900000000000 = 900.000GB ok 95 - Function, 4 decimals: 900000000000 = 900.0000GB ok 96 - Class method, 4 decimals: 900000000000 = 900.0000GB ok 97 - Object method, 4 decimals: 900000000000 = 900.0000GB ok 98 - Function, 0 decimals: 900000000000000 = 900TB ok 99 - Class method, 0 decimals: 900000000000000 = 900TB ok 100 - Object method, 0 decimals: 900000000000000 = 900TB ok 101 - Function, 1 decimals: 900000000000000 = 900.0TB ok 102 - Class method, 1 decimals: 900000000000000 = 900.0TB ok 103 - Object method, 1 decimals: 900000000000000 = 900.0TB ok 104 - Function, 2 decimals: 900000000000000 = 900.00TB ok 105 - Class method, 2 decimals: 900000000000000 = 900.00TB ok 106 - Object method, 2 decimals: 900000000000000 = 900.00TB ok 107 - Function, 3 decimals: 900000000000000 = 900.000TB ok 108 - Class method, 3 decimals: 900000000000000 = 900.000TB ok 109 - Object method, 3 decimals: 900000000000000 = 900.000TB ok 110 - Function, 4 decimals: 900000000000000 = 900.0000TB ok 111 - Class method, 4 decimals: 900000000000000 = 900.0000TB ok 112 - Object method, 4 decimals: 900000000000000 = 900.0000TB ok All tests successful. Files=3, Tests=216, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.14 cusr 0.03 csys = 0.20 CPU) Result: PASS make[1]: Leaving directory '/<>' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libformat-human-bytes-perl/ make -j2 install DESTDIR=/<>/debian/libformat-human-bytes-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/<>' Manifying 1 pod document Installing /<>/debian/libformat-human-bytes-perl/usr/share/perl5/Format/Human/Bytes.pm Installing /<>/debian/libformat-human-bytes-perl/usr/share/man/man3/Format::Human::Bytes.3pm make[1]: Leaving directory '/<>' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libformat-human-bytes-perl' in '../libformat-human-bytes-perl_0.06-2_all.deb'. dpkg-genbuildinfo -O../libformat-human-bytes-perl_0.06-2_amd64.buildinfo dpkg-genchanges -O../libformat-human-bytes-perl_0.06-2_amd64.changes dpkg-genchanges: info: not including original source code in upload dpkg-source -Zxz --after-build . dpkg-buildpackage: info: binary and diff upload (original source NOT included) -------------------------------------------------------------------------------- Build finished at 2024-08-04T07:33:28Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ libformat-human-bytes-perl_0.06-2_amd64.changes: ------------------------------------------------ Format: 1.8 Date: Tue, 14 Jun 2022 21:40:00 +0100 Source: libformat-human-bytes-perl Binary: libformat-human-bytes-perl Architecture: source all Version: 0.06-2 Distribution: perl-5.40-throwaway Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libformat-human-bytes-perl - Format a bytecount and make it human readable Changes: libformat-human-bytes-perl (0.06-2) unstable; urgency=medium . [ Salvatore Bonaccorso ] * Update Vcs-Browser URL to cgit web frontend * debian/control: Use HTTPS transport protocol for Vcs-Git URI . [ gregor herrmann ] * debian/copyright: change Copyright-Format 1.0 URL to HTTPS. * Remove Deepak Tripathi from Uploaders. Thanks for your work! . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ Debian Janitor ] * Bump debhelper from deprecated 7 to 12. * Set debhelper-compat version in Build-Depends. * Add missing build dependency on libmodule-install-perl. . [ gregor herrmann ] * debian/watch: use uscan version 4. Checksums-Sha1: 2382ddddc6be5bd33b6ab69e33fcbb5835124700 1334 libformat-human-bytes-perl_0.06-2.dsc 2180476e8e486bf8df874c231d351f026514a1e7 2356 libformat-human-bytes-perl_0.06-2.debian.tar.xz 84cbeea8c3a8a687c912e78ffa1d04af3a29efe5 7428 libformat-human-bytes-perl_0.06-2_all.deb 216df2391c10ce0dd61d1e19f5eee76f5b9945d9 5326 libformat-human-bytes-perl_0.06-2_amd64.buildinfo Checksums-Sha256: c520db8d38230e037133ead3d36f050326bd276e4874088ba46a0acd16541d67 1334 libformat-human-bytes-perl_0.06-2.dsc 609893e5436ccc487dc297c231b98d146aa88e4b7e435175ece5a9b151073230 2356 libformat-human-bytes-perl_0.06-2.debian.tar.xz 26f4119b6758f549ab0754ecd28d1e6644175bc83b1314774f15fec59ae293c4 7428 libformat-human-bytes-perl_0.06-2_all.deb dfc6da402c9274de8602017bdc44e613155d5ec07f4fde06bad1db8e7241dbc9 5326 libformat-human-bytes-perl_0.06-2_amd64.buildinfo Files: f4ec8cd4ba19b42e8608cb65c8ee53d5 1334 perl optional libformat-human-bytes-perl_0.06-2.dsc 6e342d2c362fe59bb4ceb57ab812ec42 2356 perl optional libformat-human-bytes-perl_0.06-2.debian.tar.xz f7d41c92c23f162f81479de2871f1471 7428 perl optional libformat-human-bytes-perl_0.06-2_all.deb e36d656268c7e990ef7805ebfdf6c1b1 5326 perl optional libformat-human-bytes-perl_0.06-2_amd64.buildinfo +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: libformat-human-bytes-perl Binary: libformat-human-bytes-perl Architecture: all source Version: 0.06-2 Checksums-Md5: f4ec8cd4ba19b42e8608cb65c8ee53d5 1334 libformat-human-bytes-perl_0.06-2.dsc f7d41c92c23f162f81479de2871f1471 7428 libformat-human-bytes-perl_0.06-2_all.deb Checksums-Sha1: 2382ddddc6be5bd33b6ab69e33fcbb5835124700 1334 libformat-human-bytes-perl_0.06-2.dsc 84cbeea8c3a8a687c912e78ffa1d04af3a29efe5 7428 libformat-human-bytes-perl_0.06-2_all.deb Checksums-Sha256: c520db8d38230e037133ead3d36f050326bd276e4874088ba46a0acd16541d67 1334 libformat-human-bytes-perl_0.06-2.dsc 26f4119b6758f549ab0754ecd28d1e6644175bc83b1314774f15fec59ae293c4 7428 libformat-human-bytes-perl_0.06-2_all.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Sun, 04 Aug 2024 07:33:28 +0000 Build-Path: /<> Build-Tainted-By: merged-usr-via-aliased-dirs usr-local-has-programs Installed-Build-Depends: autoconf (= 2.71-3), automake (= 1:1.16.5-1.3), autopoint (= 0.22.5-2), autotools-dev (= 20220109.1), base-files (= 13.4), base-passwd (= 3.6.4), bash (= 5.2.21-2.1), binutils (= 2.42.90.20240720-2), binutils-common (= 2.42.90.20240720-2), binutils-x86-64-linux-gnu (= 2.42.90.20240720-2), bsdextrautils (= 2.40.2-1), bsdutils (= 1:2.40.2-1), build-essential (= 12.10), bzip2 (= 1.0.8-5.1), coreutils (= 9.4-3.1), cpp (= 4:14.1.0-2), cpp-13 (= 13.3.0-4), cpp-13-x86-64-linux-gnu (= 13.3.0-4), cpp-14 (= 14.2.0-1), cpp-14-x86-64-linux-gnu (= 14.2.0-1), cpp-x86-64-linux-gnu (= 4:14.1.0-2), dash (= 0.5.12-9), debconf (= 1.5.87), debhelper (= 13.16), debianutils (= 5.20), dh-autoreconf (= 20), dh-strip-nondeterminism (= 1.14.0-1), diffutils (= 1:3.10-1), dpkg (= 1.22.11), dpkg-dev (= 1.22.11), dwz (= 0.15-1+b1), file (= 1:5.45-3), findutils (= 4.10.0-2), g++ (= 4:14.1.0-2), g++-14 (= 14.2.0-1), g++-14-x86-64-linux-gnu (= 14.2.0-1), g++-x86-64-linux-gnu (= 4:14.1.0-2), gcc (= 4:14.1.0-2), gcc-13 (= 13.3.0-4), gcc-13-base (= 13.3.0-4), gcc-13-x86-64-linux-gnu (= 13.3.0-4), gcc-14 (= 14.2.0-1), gcc-14-base (= 14.2.0-1), gcc-14-x86-64-linux-gnu (= 14.2.0-1), gcc-x86-64-linux-gnu (= 4:14.1.0-2), gettext (= 0.22.5-2), gettext-base (= 0.22.5-2), grep (= 3.11-4), groff-base (= 1.23.0-5), gzip (= 1.12-1.1), hostname (= 3.23+nmu2), init-system-helpers (= 1.66), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.3.2-2), libarchive-zip-perl (= 1.68-1), libasan8 (= 14.2.0-1), libatomic1 (= 14.2.0-1), libattr1 (= 1:2.5.2-1), libaudit-common (= 1:3.1.2-4), libaudit1 (= 1:3.1.2-4+b1), libbinutils (= 2.42.90.20240720-2), libblkid1 (= 2.40.2-1), libbz2-1.0 (= 1.0.8-5.1), libc-bin (= 2.39-6), libc-dev-bin (= 2.39-6), libc6 (= 2.39-6), libc6-dev (= 2.39-6), libcap-ng0 (= 0.8.5-1+b1), libcap2 (= 1:2.66-5), libcc1-0 (= 14.2.0-1), libcrypt-dev (= 1:4.4.36-4), libcrypt1 (= 1:4.4.36-4), libctf-nobfd0 (= 2.42.90.20240720-2), libctf0 (= 2.42.90.20240720-2), libdb5.3t64 (= 5.3.28+dfsg2-7), libdebconfclient0 (= 0.272), libdebhelper-perl (= 13.16), libdpkg-perl (= 1.22.11), libelf1t64 (= 0.191-2), libfile-remove-perl (= 1.61-2), libfile-stripnondeterminism-perl (= 1.14.0-1), libgcc-13-dev (= 13.3.0-4), libgcc-14-dev (= 14.2.0-1), libgcc-s1 (= 14.2.0-1), libgdbm-compat4t64 (= 1.23-6), libgdbm6t64 (= 1.23-6), libgmp10 (= 2:6.3.0+dfsg-2+b1), libgomp1 (= 14.2.0-1), libgprofng0 (= 2.42.90.20240720-2), libhwasan0 (= 14.2.0-1), libicu72 (= 72.1-5), libisl23 (= 0.26-3+b2), libitm1 (= 14.2.0-1), libjansson4 (= 2.14-2+b2), liblsan0 (= 14.2.0-1), liblzma5 (= 5.6.2-2), libmagic-mgc (= 1:5.45-3), libmagic1t64 (= 1:5.45-3), libmd0 (= 1.1.0-2), libmodule-install-perl (= 1.21-2), libmodule-scandeps-perl (= 1.35-1), libmount1 (= 2.40.2-1), libmpc3 (= 1.3.1-1+b2), libmpfr6 (= 4.2.1-1+b1), libpam-modules (= 1.5.3-7), libpam-modules-bin (= 1.5.3-7), libpam-runtime (= 1.5.3-7), libpam0g (= 1.5.3-7), libpcre2-8-0 (= 10.42-4+b1), libperl5.40 (= 5.40.0-1), libpipeline1 (= 1.5.7-2), libquadmath0 (= 14.2.0-1), libseccomp2 (= 2.5.5-1+b1), libselinux1 (= 3.5-2+b3), libsframe1 (= 2.42.90.20240720-2), libsmartcols1 (= 2.40.2-1), libssl3t64 (= 3.3.1-2), libstdc++-14-dev (= 14.2.0-1), libstdc++6 (= 14.2.0-1), libsystemd0 (= 256.4-2), libtinfo6 (= 6.5-2), libtool (= 2.4.7-7), libtsan2 (= 14.2.0-1), libubsan1 (= 14.2.0-1), libuchardet0 (= 0.0.8-1+b1), libudev1 (= 256.4-2), libunistring5 (= 1.2-1), libuuid1 (= 2.40.2-1), libxml2 (= 2.12.7+dfsg-3+b1), libyaml-tiny-perl (= 1.74-1), libzstd1 (= 1.5.6+dfsg-1), linux-libc-dev (= 6.9.12-1), m4 (= 1.4.19-4), make (= 4.3-4.1), man-db (= 2.12.1-2), mawk (= 1.3.4.20240622-2), ncurses-base (= 6.5-2), ncurses-bin (= 6.5-2), patch (= 2.7.6-7), perl (= 5.40.0-1), perl-base (= 5.40.0-1), perl-modules-5.40 (= 5.40.0-1), po-debconf (= 1.0.21+nmu1), rpcsvc-proto (= 1.4.3-1), sed (= 4.9-2), sensible-utils (= 0.0.24), sysvinit-utils (= 3.09-2), tar (= 1.35+dfsg-3), usr-is-merged (= 39), util-linux (= 2.40.2-1), xz-utils (= 5.6.2-2), zlib1g (= 1:1.3.dfsg+really1.3.1-1) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" SOURCE_DATE_EPOCH="1655239200" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libformat-human-bytes-perl_0.06-2_all.deb ----------------------------------------- new Debian package, version 2.0. size 7428 bytes: control archive=880 bytes. 981 bytes, 27 lines control 421 bytes, 5 lines md5sums Package: libformat-human-bytes-perl Version: 0.06-2 Architecture: all Maintainer: Debian Perl Group Installed-Size: 25 Depends: perl:any Section: perl Priority: optional Homepage: https://metacpan.org/release/Format-Human-Bytes Description: Format a bytecount and make it human readable Format::Human::Bytes is used to convert bytecount values to human-readable strings. It will return you a printable string which is more readable by humans than a simple bytecount. . For example: use Format::Human::Bytes; $readable = Format::Human::Bytes::base2($bytecount[,$decimals]); It will convert in base 2 format. . $readable = Format::Human::Bytes::base10($bytecount[,$decimals]); It will convert in base 10 format. . Another way is to create constructor for example: . $fhb = Format::Human::Bytes->new(); $readable = $fhb->base2($bytecount[,$decimals]); $readable = $fhb->base10($bytecount[,$decimals]); drwxr-xr-x root/root 0 2022-06-14 20:40 ./ drwxr-xr-x root/root 0 2022-06-14 20:40 ./usr/ drwxr-xr-x root/root 0 2022-06-14 20:40 ./usr/share/ drwxr-xr-x root/root 0 2022-06-14 20:40 ./usr/share/doc/ drwxr-xr-x root/root 0 2022-06-14 20:40 ./usr/share/doc/libformat-human-bytes-perl/ -rw-r--r-- root/root 1074 2022-06-14 20:40 ./usr/share/doc/libformat-human-bytes-perl/changelog.Debian.gz -rw-r--r-- root/root 343 2010-09-14 12:01 ./usr/share/doc/libformat-human-bytes-perl/changelog.gz -rw-r--r-- root/root 1284 2022-06-14 20:40 ./usr/share/doc/libformat-human-bytes-perl/copyright drwxr-xr-x root/root 0 2022-06-14 20:40 ./usr/share/man/ drwxr-xr-x root/root 0 2022-06-14 20:40 ./usr/share/man/man3/ -rw-r--r-- root/root 2229 2022-06-14 20:40 ./usr/share/man/man3/Format::Human::Bytes.3pm.gz drwxr-xr-x root/root 0 2022-06-14 20:40 ./usr/share/perl5/ drwxr-xr-x root/root 0 2022-06-14 20:40 ./usr/share/perl5/Format/ drwxr-xr-x root/root 0 2022-06-14 20:40 ./usr/share/perl5/Format/Human/ -rw-r--r-- root/root 5822 2010-09-14 12:02 ./usr/share/perl5/Format/Human/Bytes.pm +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 476 Build-Time: 3 Distribution: perl-5.40-throwaway Host Architecture: amd64 Install-Time: 4 Job: /srv/debomatic/incoming/libformat-human-bytes-perl_0.06-2.dsc Machine Architecture: amd64 Package: libformat-human-bytes-perl Package-Time: 11 Source-Version: 0.06-2 Space: 476 Status: successful Version: 0.06-2 -------------------------------------------------------------------------------- Finished at 2024-08-04T07:33:28Z Build needed 00:00:11, 476k disk space