sbuild (Debian sbuild) 0.85.10 (30 May 2024) on carme.larted.org.uk +==============================================================================+ | libdbd-xbase-perl 1:1.08-2 (amd64) Sun, 04 Aug 2024 06:28:10 +0000 | +==============================================================================+ Package: libdbd-xbase-perl Version: 1:1.08-2 Source Version: 1:1.08-2 Distribution: perl-5.40-throwaway Machine Architecture: amd64 Host Architecture: amd64 Build Architecture: amd64 Build Type: full I: NOTICE: Log filtering will replace 'var/run/schroot/mount/perl-5.40-amd64-debomatic-0bbc75e4-28a4-4fb5-9b8a-44a0497e5230' with '<>' +------------------------------------------------------------------------------+ | Chroot Setup Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libdbd-xbase-perl_1.08-2 perl-5.40-throwaway amd64 ------------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libdbd-xbase-perl_1.08-2 perl-5.40-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- I: NOTICE: Log filtering will replace 'build/libdbd-xbase-perl-JAEC40/resolver-iadSyn' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Get:1 file:/srv/reprepro perl-5.40 InRelease [3042 B] Hit:2 http://deb.debian.org/debian unstable InRelease Get:1 file:/srv/reprepro perl-5.40 InRelease [3042 B] Ign:3 http://localhost:3142/debian sid InRelease Hit:3 http://localhost:3142/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /srv/debomatic/incoming/libdbd-xbase-perl_1.08-2.dsc exists in /srv/debomatic/incoming; copying to chroot I: NOTICE: Log filtering will replace 'build/libdbd-xbase-perl-JAEC40/libdbd-xbase-perl-1.08' with '<>' I: NOTICE: Log filtering will replace 'build/libdbd-xbase-perl-JAEC40' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 13), build-essential, fakeroot, perl, libdbi-perl Filtered Build-Depends: debhelper-compat (= 13), build-essential, fakeroot, perl, libdbi-perl dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [609 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [656 B] Get:5 copy:/<>/apt_archive ./ Packages [668 B] Fetched 1933 B in 0s (0 B/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdbi-perl libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libpipeline1 libtool libuchardet0 libxml2 m4 man-db po-debconf sensible-utils Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev groff libclone-perl libmldbm-perl libnet-daemon-perl libsql-statement-perl libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libarchive-cpio-perl libltdl-dev libmail-sendmail-perl The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdbi-perl libdebhelper-perl libelf1t64 libfakeroot libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libpipeline1 libtool libuchardet0 libxml2 m4 man-db po-debconf sbuild-build-depends-main-dummy sensible-utils 0 upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 19.7 MB/20.4 MB of archives. After this operation, 77.6 MB of additional disk space will be used. Get:1 file:/srv/reprepro perl-5.40/main amd64 libdbi-perl amd64 1.643-4+b3 [755 kB] Get:2 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [888 B] Get:3 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.24 [24.8 kB] Get:4 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB] Get:5 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB] Get:6 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.45-3 [42.9 kB] Get:7 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.22.5-2 [200 kB] Get:8 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB] Get:9 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-5 [1181 kB] Get:10 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.40.2-1 [96.1 kB] Get:11 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.7-2 [38.0 kB] Get:12 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.12.1-2 [1411 kB] Get:13 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.19-4 [287 kB] Get:14 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.71-3 [332 kB] Get:15 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20220109.1 [51.6 kB] Get:16 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.16.5-1.3 [823 kB] Get:17 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.22.5-2 [723 kB] Get:18 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.16 [88.6 kB] Get:19 http://deb.debian.org/debian unstable/main amd64 libtool all 2.4.7-7 [517 kB] Get:20 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB] Get:21 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get:22 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB] Get:23 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B] Get:24 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.191-2 [188 kB] Get:25 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get:26 http://deb.debian.org/debian unstable/main amd64 libicu72 amd64 72.1-5 [9396 kB] Get:27 http://deb.debian.org/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg-3+b1 [671 kB] Get:28 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.22.5-2 [1601 kB] Get:29 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:30 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get:31 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.16 [891 kB] Get:32 http://deb.debian.org/debian unstable/main amd64 libfakeroot amd64 1.35.1-1 [28.6 kB] Get:33 http://deb.debian.org/debian unstable/main amd64 fakeroot amd64 1.35.1-1 [74.5 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 19.7 MB in 0s (152 MB/s) Selecting previously unselected package sensible-utils. (Reading database ... 22966 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-1_amd64.deb ... Unpacking bsdextrautils (2.40.2-1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.7-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-2) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.12.1-2_amd64.deb ... Unpacking man-db (2.12.1-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.16_all.deb ... Unpacking libdebhelper-perl (13.16) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.191-2_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5_amd64.deb ... Unpacking libicu72:amd64 (72.1-5) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg-3+b1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg-3+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.16_all.deb ... Unpacking debhelper (13.16) ... Selecting previously unselected package libfakeroot:amd64. Preparing to unpack .../29-libfakeroot_1.35.1-1_amd64.deb ... Unpacking libfakeroot:amd64 (1.35.1-1) ... Selecting previously unselected package fakeroot. Preparing to unpack .../30-fakeroot_1.35.1-1_amd64.deb ... Unpacking fakeroot (1.35.1-1) ... Selecting previously unselected package libdbi-perl:amd64. Preparing to unpack .../31-libdbi-perl_1.643-4+b3_amd64.deb ... Unpacking libdbi-perl:amd64 (1.643-4+b3) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../32-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.7-2) ... Setting up libicu72:amd64 (72.1-5) ... Setting up bsdextrautils (2.40.2-1) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.16) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libfakeroot:amd64 (1.35.1-1) ... Setting up libelf1t64:amd64 (0.191-2) ... Setting up fakeroot (1.35.1-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.71-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libxml2:amd64 (2.12.7+dfsg-3+b1) ... Setting up libdbi-perl:amd64 (1.643-4+b3) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.12.1-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.16) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... Processing triggers for libc-bin (2.39-6) ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Arch check ok (amd64 included in all) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 6.9.7-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.9.7-1 (2024-06-27) amd64 (x86_64) Toolchain package versions: binutils_2.42.90.20240720-2 dpkg-dev_1.22.11 g++-13_13.3.0-4 g++-14_14.2.0-1 gcc-13_13.3.0-4 gcc-14_14.2.0-1 libc6-dev_2.39-6 libstdc++-13-dev_13.3.0-4 libstdc++-14-dev_14.2.0-1 libstdc++6_14.2.0-1 linux-libc-dev_6.9.12-1 Package versions: adduser_3.137 apt_2.9.7 autoconf_2.71-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.4 base-passwd_3.6.4 bash_5.2.21-2.1 binutils_2.42.90.20240720-2 binutils-common_2.42.90.20240720-2 binutils-x86-64-linux-gnu_2.42.90.20240720-2 bsdextrautils_2.40.2-1 bsdutils_1:2.40.2-1 build-essential_12.10 bzip2_1.0.8-5.1 coreutils_9.4-3.1 cpp_4:14.1.0-2 cpp-13_13.3.0-4 cpp-13-x86-64-linux-gnu_13.3.0-4 cpp-14_14.2.0-1 cpp-14-x86-64-linux-gnu_14.2.0-1 cpp-x86-64-linux-gnu_4:14.1.0-2 dash_0.5.12-9 debconf_1.5.87 debhelper_13.16 debian-archive-keyring_2023.4 debianutils_5.20 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffutils_1:3.10-1 dirmngr_2.2.43-8 dpkg_1.22.11 dpkg-dev_1.22.11 dwz_0.15-1+b1 eatmydata_131-2 fakeroot_1.35.1-1 file_1:5.45-3 findutils_4.10.0-2 g++_4:14.1.0-2 g++-13_13.3.0-4 g++-13-x86-64-linux-gnu_13.3.0-4 g++-14_14.2.0-1 g++-14-x86-64-linux-gnu_14.2.0-1 g++-x86-64-linux-gnu_4:14.1.0-2 gcc_4:14.1.0-2 gcc-13_13.3.0-4 gcc-13-base_13.3.0-4 gcc-13-x86-64-linux-gnu_13.3.0-4 gcc-14_14.2.0-1 gcc-14-base_14.2.0-1 gcc-14-x86-64-linux-gnu_14.2.0-1 gcc-x86-64-linux-gnu_4:14.1.0-2 gettext_0.22.5-2 gettext-base_0.22.5-2 gnupg_2.2.43-8 gnupg-l10n_2.2.43-8 gnupg-utils_2.2.43-8 gpg_2.2.43-8 gpg-agent_2.2.43-8 gpg-wks-client_2.2.43-8 gpgconf_2.2.43-8 gpgsm_2.2.43-8 gpgv_2.2.43-8 grep_3.11-4 groff-base_1.23.0-5 gzip_1.12-1.1 hostname_3.23+nmu2 init-system-helpers_1.66 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-2 libapt-pkg6.0t64_2.9.7 libarchive-zip-perl_1.68-1 libasan8_14.2.0-1 libassuan0_2.5.6-1+b1 libatomic1_14.2.0-1 libattr1_1:2.5.2-1 libaudit-common_1:3.1.2-4 libaudit1_1:3.1.2-4+b1 libbinutils_2.42.90.20240720-2 libblkid1_2.40.2-1 libbsd0_0.12.2-1 libbz2-1.0_1.0.8-5.1 libc-bin_2.39-6 libc-dev-bin_2.39-6 libc-l10n_2.39-6 libc6_2.39-6 libc6-dev_2.39-6 libcap-ng0_0.8.5-1+b1 libcap2_1:2.66-5 libcc1-0_14.2.0-1 libcrypt-dev_1:4.4.36-4 libcrypt1_1:4.4.36-4 libctf-nobfd0_2.42.90.20240720-2 libctf0_2.42.90.20240720-2 libdb5.3t64_5.3.28+dfsg2-7 libdbi-perl_1.643-4+b3 libdebconfclient0_0.272 libdebhelper-perl_13.16 libdpkg-perl_1.22.11 libeatmydata1_131-2 libelf1t64_0.191-2 libfakeroot_1.35.1-1 libffi8_3.4.6-1 libfile-stripnondeterminism-perl_1.14.0-1 libgcc-13-dev_13.3.0-4 libgcc-14-dev_14.2.0-1 libgcc-s1_14.2.0-1 libgcrypt20_1.11.0-5 libgdbm-compat4t64_1.23-6 libgdbm6t64_1.23-6 libgmp10_2:6.3.0+dfsg-2+b1 libgnutls30t64_3.8.6-2 libgomp1_14.2.0-1 libgpg-error0_1.50-2 libgprofng0_2.42.90.20240720-2 libhogweed6t64_3.10-1 libhwasan0_14.2.0-1 libicu72_72.1-5 libidn2-0_2.3.7-2 libisl23_0.26-3+b2 libitm1_14.2.0-1 libjansson4_2.14-2+b2 libksba8_1.6.7-2 libldap-2.5-0_2.5.18+dfsg-2+b1 liblsan0_14.2.0-1 liblz4-1_1.9.4-3 liblzma5_5.6.2-2 libmagic-mgc_1:5.45-3 libmagic1t64_1:5.45-3 libmd0_1.1.0-2 libmount1_2.40.2-1 libmpc3_1.3.1-1+b2 libmpfr6_4.2.1-1+b1 libncursesw6_6.5-2 libnettle8t64_3.10-1 libnpth0t64_1.6-3.1 libp11-kit0_0.25.5-2 libpam-modules_1.5.3-7 libpam-modules-bin_1.5.3-7 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7 libpcre2-8-0_10.42-4+b1 libperl5.38t64_5.38.2-5 libperl5.40_5.40.0-1 libpipeline1_1.5.7-2 libquadmath0_14.2.0-1 libreadline8t64_8.2-4 libsasl2-2_2.1.28+dfsg1-6 libsasl2-modules-db_2.1.28+dfsg1-6 libseccomp2_2.5.5-1+b1 libselinux1_3.5-2+b3 libsemanage-common_3.5-1 libsemanage2_3.5-1+b4 libsepol2_3.5-2+b1 libsframe1_2.42.90.20240720-2 libsmartcols1_2.40.2-1 libsqlite3-0_3.46.0-1 libssl3t64_3.3.1-2 libstdc++-13-dev_13.3.0-4 libstdc++-14-dev_14.2.0-1 libstdc++6_14.2.0-1 libsystemd0_256.4-2 libtasn1-6_4.19.0-3+b2 libtinfo6_6.5-2 libtool_2.4.7-7 libtsan2_14.2.0-1 libubsan1_14.2.0-1 libuchardet0_0.0.8-1+b1 libudev1_256.4-2 libunistring5_1.2-1 libuuid1_2.40.2-1 libxml2_2.12.7+dfsg-3+b1 libxxhash0_0.8.2-2+b1 libzstd1_1.5.6+dfsg-1 linux-libc-dev_6.9.12-1 locales-all_2.39-6 login_1:4.15.3-3 m4_1.4.19-4 make_4.3-4.1 man-db_2.12.1-2 mawk_1.3.4.20240622-2 ncurses-base_6.5-2 ncurses-bin_6.5-2 passwd_1:4.15.3-3 patch_2.7.6-7 perl_5.40.0-1 perl-base_5.40.0-1 perl-modules-5.38_5.38.2-5 perl-modules-5.40_5.40.0-1 pinentry-curses_1.2.1-3+b2 po-debconf_1.0.21+nmu1 readline-common_8.2-4 rpcsvc-proto_1.4.3-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2 sensible-utils_0.0.24 sysvinit-utils_3.09-2 tar_1.35+dfsg-3 usr-is-merged_39 util-linux_2.40.2-1 xz-utils_5.6.2-2 zlib1g_1:1.3.dfsg+really1.3.1-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libdbd-xbase-perl Binary: libdbd-xbase-perl Architecture: all Version: 1:1.08-2 Maintainer: Debian Perl Group Uploaders: gregor herrmann , Damyan Ivanov , Florian Schlichting Homepage: https://metacpan.org/release/DBD-XBase Standards-Version: 3.9.8 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libdbd-xbase-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libdbd-xbase-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 13) Build-Depends-Indep: perl, libdbi-perl Package-List: libdbd-xbase-perl deb perl optional arch=all Checksums-Sha1: b3ee991a7a33daa8b0691615469ef6db01d12b5a 113727 libdbd-xbase-perl_1.08.orig.tar.gz ac7d91397d124089365d25774681eb8e18603a93 9960 libdbd-xbase-perl_1.08-2.debian.tar.xz Checksums-Sha256: b5fb16c2b7a3e76b709a72e3fc58b64b3b35f3c33249623044bb214cd886b069 113727 libdbd-xbase-perl_1.08.orig.tar.gz 440e8ca156bfe398c4592a0ba49b6b45a2d82debecda0d6a7340bb80c8dd2d84 9960 libdbd-xbase-perl_1.08-2.debian.tar.xz Files: 46c96ad148c7b52025e7699e68771caa 113727 libdbd-xbase-perl_1.08.orig.tar.gz 52aea5ed856d429a3bf214833271e44c 9960 libdbd-xbase-perl_1.08-2.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmKnR84ACgkQV5wWDUye I+ixrQ/+KiNltl+qLeDb/fjSpHbx09p5khWGIQzTGZDNAdu4Gm4g6T+Swo/oFDAc jvMICiJ0OLagWJ2nLlTzfKE3Y25BlebP0IzhJ0xS0P7ymBkfveFe7tqsiM6TMY6I 6uQOc7iTc33IO7t2srd38mRMIazhYHgQZPBoZv+0dJ56qFG+P4TMl/Dt/0EILLjZ kQfTPGj4Ng1+NSECmszB2C0FYdkSCRKL7HAghjz53fMHoOiR1D/YtvGZ0k9U6ojW UH0648ACOvCKurDaYxX4jeTJW7Knzy3c7IdYCxd0yTU7cj+N9C7dyY8NoCaPv1Mu DfyYdga2Hu5I5cZJAWFZJUqCwrHkV36Jg8/WuGt2kpiUq3SwqY++bttFxc9gHr0Y CXut0Fa22ArDzmKH+RC2STLSiQPgZo6rGNROE6F8MPtHLz3NBFUaimJxZmGXEPL0 IxYsuhnTD1eHHFFRQGT8Q/tFzcaXUhRduVWQjzN5y5rE/hKJ0W6GL7aEGXgBGaY9 Qh2sIYInZznUW1X2bbXZorcfCh/HrareUJSvVuv4FIFzF7yqIyvF9Y9Apj++rH4D K0r9Z/YRt3nj03sDUVu1+f3jbovttwi3OHQ0iqPl9qHZMGfq76kTNfM/KjHOYJrP uDEISbGRBVZYPq+asPfZ9e86qAKHkMwOAVnRsGaAJ8Uy6huM3JQ= =d9pE -----END PGP SIGNATURE----- gpgv: Signature made Mon Jun 13 14:21:02 2022 UTC gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libdbd-xbase-perl_1.08-2.dsc: no acceptable signature found dpkg-source: info: extracting libdbd-xbase-perl in /<> dpkg-source: info: unpacking libdbd-xbase-perl_1.08.orig.tar.gz dpkg-source: info: unpacking libdbd-xbase-perl_1.08-2.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying underline-dump.patch dpkg-source: info: applying pod_spelling.patch dpkg-source: info: applying autopkgtest.patch Check disk space ---------------- Sufficient free space for build +------------------------------------------------------------------------------+ | Starting Timed Build Commands | +------------------------------------------------------------------------------+ /usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libdbd-xbase-perl_1.08-2 perl-5.40-throwaway amd64 ------------------------------------------------------------------------------------------------------------------------- I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libdbd-xbase-perl_1.08-2 perl-5.40-throwaway amd64'. Finished processing commands. -------------------------------------------------------------------------------- User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf HOME=/sbuild-nonexistent LANG=en_GB.UTF-8 LANGUAGE=en_GB:en LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=debomatic PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=perl-5.40-throwaway-amd64-debomatic SCHROOT_CHROOT_NAME=perl-5.40-amd64-debomatic SCHROOT_COMMAND=env SCHROOT_GID=110 SCHROOT_GROUP=sbuild SCHROOT_SESSION_ID=perl-5.40-amd64-debomatic-0bbc75e4-28a4-4fb5-9b8a-44a0497e5230 SCHROOT_UID=1002 SCHROOT_USER=debomatic SHELL=/bin/sh USER=debomatic dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -rfakeroot -Zxz dpkg-buildpackage: info: source package libdbd-xbase-perl dpkg-buildpackage: info: source version 1:1.08-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source -Zxz --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean dh clean dh_clean dpkg-source -Zxz -b . dpkg-source: info: using source format '3.0 (quilt)' dpkg-source: info: building libdbd-xbase-perl using existing ./libdbd-xbase-perl_1.08.orig.tar.gz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: building libdbd-xbase-perl in libdbd-xbase-perl_1.08-2.debian.tar.xz dpkg-source: info: building libdbd-xbase-perl in libdbd-xbase-perl_1.08-2.dsc debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro" If there are any problems with this module, read the README first. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for XBase Writing MYMETA.yml and MYMETA.json debian/rules override_dh_auto_build make[1]: Entering directory '/<>' dh_auto_build make -j2 make[2]: Entering directory '/<>' cp lib/XBase/Index.pm blib/lib/XBase/Index.pm cp lib/XBase/SQL.pm blib/lib/XBase/SQL.pm cp lib/XBase/FAQ.pod blib/lib/XBase/FAQ.pod cp lib/XBase.pm blib/lib/XBase.pm cp lib/XBase/SDBM.pm blib/lib/XBase/SDBM.pm cp lib/DBD/XBase.pm blib/lib/DBD/XBase.pm cp lib/XBase/Memo.pm blib/lib/XBase/Memo.pm cp lib/XBase/Base.pm blib/lib/XBase/Base.pm "/usr/bin/perl" "-Iblib/arch" "-Iblib/lib" bin/indexdump.PL bin/indexdump "/usr/bin/perl" "-Iblib/arch" "-Iblib/lib" bin/dbfdump.PL bin/dbfdump Extracting bin/indexdump (with #! and variable substitution) Extracting bin/dbfdump (with #! and variable substitution) cp bin/dbfdump blib/script/dbfdump cp bin/indexdump blib/script/indexdump "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/dbfdump "/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/indexdump Manifying 2 pod documents Manifying 7 pod documents make[2]: Leaving directory '/<>' pod2text driver_characteristics > debian/driver_characteristics make[1]: Leaving directory '/<>' dh_auto_test make -j2 test TEST_VERBOSE=1 make[1]: Entering directory '/<>' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/1_header.t ........... 1..10 Load the module: use XBase ok 1 This is XBase version 1.08 Create the new XBase object, load the data from table test.dbf ok 2 Now, look into the object and check, if it has been filled OK ok 3 Check the field names ok 4 Get verbose header info (using header_info) ok 5 Check if loading table that doesn't exist will produce error ok 6 Check the returned error message ok 7 Load table without specifying the .dbf suffix ok 8 If all tests in this file passed, the module works to such an extend that new XBase loads the table and correctly parses the information in the file header. Now reload with recompute_lastrecno ok 9 ok 10 ok t/2_read.t ............. 1..9 Load the module: use XBase ok 1 Load table test.dbf ok 2 Read the records, one by one ok 3 Get record 0 as hash ok 4 Load the table rooms ok 5 Check the records using read_record ok 6 Check the records using get_all_records ok 7 Check if reading record that doesn't exist will produce error ok 8 Check error message ok 9 If all tests in this file passed, reading of the dbf data seems correct, including the dbt memo file. ok t/2_read_stream.t ...... 1..5 Load the module: use XBase ok 1 Set XBase::Base::SEEK_VIA_READ(1) Load table test.dbf ok 2 Load the records, one by one ok 3 And now will read a dbf from filehandle. ok 4 ok 5 ok t/2_write.t ............ 1..11 Load the module: use XBase ok 1 Unlink write.dbf and write.dbt, make a copy of test.dbf and test.dbt ok 2 Load the table write.dbf ok 3 Check the last record number (number of records, in fact) ok 4 Overwrite the record and check it back ok 5 Did last record number stay the same? ok 6 Now append data and read them back ok 7 Now the number of records should have increased ok 8 Load the table write1.dbf ok 9 Append one record ok 10 Check the size of the resulting fpt ok 11 ok t/3_create_drop.t ...... 1..11 Load the module: use XBase ok 1 Unlinking newtable.dbf and newtable.dbt Create new table, newtable.dbf & newtable.dbt, with types C M D F L ok 2 Check if both (dbf and dbt) files were created ok 3 ok 4 Check their lengths (expect 194 and 512) ok 5 ok 6 Now, fill two records ok 7 ok 8 Check the header of the newly created table ok 9 Drop the table ok 10 Check if the files newtable.dbf and newtable.dbt have been deleted ok 11 ok t/4_dbfdump.t .......... 1..2 Running dbfdump rooms.dbf: /usr/bin/perl -I/<>/blib/arch -I/<>/blib/lib -I/etc/perl -I/usr/local/lib/x86_64-linux-gnu/perl/5.40.0 -I/usr/local/share/perl/5.40.0 -I/usr/lib/x86_64-linux-gnu/perl5/5.40 -I/usr/share/perl5 -I/usr/lib/x86_64-linux-gnu/perl-base -I/usr/lib/x86_64-linux-gnu/perl/5.40 -I/usr/share/perl/5.40 -I/usr/local/lib/site_perl -I. ./blib/script/dbfdump "./t/rooms.dbf" ok 1 Running stdin dbfdump < rooms.dbf: /usr/bin/perl -I/<>/blib/arch -I/<>/blib/lib -I/etc/perl -I/usr/local/lib/x86_64-linux-gnu/perl/5.40.0 -I/usr/local/share/perl/5.40.0 -I/usr/lib/x86_64-linux-gnu/perl5/5.40 -I/usr/share/perl5 -I/usr/lib/x86_64-linux-gnu/perl-base -I/usr/lib/x86_64-linux-gnu/perl/5.40 -I/usr/share/perl/5.40 -I/usr/local/lib/site_perl -I. ./blib/script/dbfdump -- - < "./t/rooms.dbf" ok 2 ok t/5_cdx.t .............. 1..9 Load the module: use XBase ok 1 Open table t/rooms ok 2 prepare_select_with_index on ROOMNAME ok 3 Fetch all data None ADR-Foley Audio AVID Main BAY 7 Main Bay 1 Main Bay 2 Main Bay 3 Main Bay 4 Main Bay 5 Main Bay 6 Main Bay 8 Main Bay 10 Main Bay 11 Main Bay 12 Main Bay 14 Main Bay 15 Main Bay 16 Main Bay 17 Main Bay 18 Main Bay 19 Main BullPen Film Celco Film Dub Main FILM 1 Film FILM 2 Film FILM 3 Film Flambe Audio Gigapix Main MacGrfx Main Mach Rm Audio Mix A Audio Mix B Audio Mix C Audio Mix D Audio Mix E Audio Mix F Audio Mix G Audio Mix H Audio Mix J Audio SCANNING Film Transfer Audio ok 4 find_eq('Celco') and fetch ok 5 find_eq('Celca') and fetch (it doesn't exist, so the result should be the same) ok 6 prepare_select_with_index on FACILITY ok 7 find_eq('Film') and fetch ok 8 find_eq('Main') and fetch ok 9 ok t/5_idx.t .............. 1..6 Load modules: use XBase; use XBase::Index; ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok t/5_ndx.t .............. 1..12 Load the module: use XBase ok 1 Open table t/ndx-char ok 2 prepare_select_with_index ok 3 Fetch all data ok 4 find_eq('6g') and fetch ok 5 find_eq('6e') and fetch (it doesn't exist, so the result should be the same) ok 6 Before we look at the numeric and data index files, let's check if it makes sense (because of the way we implement double floats ;-) Looks good. Open ndx-num and index ok 7 ok 8 find_eq(1042) and fetch results ok 9 Open ndx-date and index ok 10 ok 11 find_eq(2450795), which is Julian date for 1997/12/12 and fetch results ok 12 ok t/5_ntx.t .............. 1..66 Load the module: use XBase ok 1 Open table t/ntx-char ok 2 prepare_select ok 3 fetch all rows and sort them ok 4 prepare_select_with_index t/ntx-char.ntx ok 5 ok 6 find_eq(1) ok 7 compare results ok 8 find_eq(10) ok 9 compare results ok 10 find_eq(15) ok 11 compare results ok 12 find_eq(1w) ok 13 compare results ok 14 find_eq(1z) ok 15 compare results ok 16 find_eq(2) ok 17 compare results ok 18 find_eq(2h) ok 19 compare results ok 20 find_eq(2w) ok 21 compare results ok 22 find_eq(2z) ok 23 compare results ok 24 find_eq(3) ok 25 compare results ok 26 find_eq(3a) ok 27 compare results ok 28 find_eq(3w) ok 29 compare results ok 30 find_eq(4) ok 31 compare results ok 32 find_eq(4e) ok 33 compare results ok 34 find_eq(4w) ok 35 compare results ok 36 find_eq(5) ok 37 compare results ok 38 find_eq(5b) ok 39 compare results ok 40 find_eq(5w) ok 41 compare results ok 42 find_eq(6) ok 43 compare results ok 44 find_eq(6g) ok 45 compare results ok 46 find_eq(6w) ok 47 compare results ok 48 find_eq(7) ok 49 compare results ok 50 find_eq(7w) ok 51 compare results ok 52 find_eq(8) ok 53 compare results ok 54 find_eq(8d) ok 55 compare results ok 56 find_eq(8w) ok 57 compare results ok 58 find_eq(9) ok 59 compare results ok 60 find_eq(9g) ok 61 compare results ok 62 find_eq(9h) ok 63 compare results ok 64 find_eq(9w) ok 65 compare results ok 66 ok t/5_sdbm.t ............. 1..9 Load the module: use XBase ok 1 Open table t/rooms ok 2 Create SDBM index room on ROOMNAME ok 3 prepare_select_with_index on ROOMNAME seems fine Fetch all data ok 4 find_eq('Celco') and fetch ok 5 find_eq('Celca') and fetch (it doesn't exist, so the result should be the same) ok 6 prepare_select_with_index on FACILITY ok 7 find_eq('Film') and fetch ok 8 find_eq('Main') and fetch ok 9 ok t/6_attach_cdx.t ....... 1..7 Load the module: use XBase ok 1 Unlink write.dbf and write.dbt, make a copy of test.dbf and test.dbt ok 2 Open table t/rooms1 ok 3 Attach indexfile t/rooms1.cdx ok 4 Delete record 26: Dub:Main ok 5 Undelete record 26: Dub:Main ok 6 Append record: Krtek:Jezek ok 7 ok t/7_dbd_select.t ....... 1..47 DBI loaded ok 1 Connect to dbi:XBase:t ok 2 Prepare command `select ID, MSG from test' ok 3 Execute it ok 4 And get two lines Got: 1:Record no 1 ok 5 Got: 3:Message no 3 ok 6 Got empty list ok 7 Check attributes NAME, TYPE, PRECISION ok 8 Prepare command `select * from rooms where facility = 'Audio' or roomname > 'B'' ok 9 Execute it ok 10 And now get the result ok 11 Check attributes NAME, TYPE, PRECISION ok 12 Prepare command `select * from rooms where facility = ? or roomname > ?' ok 13 Execute it with bind parameters ('Audio', 'B') ok 14 And now get the result ok 15 Prepare command `select facility,roomname from rooms where roomname > ? or facility = ? order by roomname' ok 16 Execute it with bind parameters ('F', 'Audio') ok 17 And now get the result ok 18 Prepare select * from rooms where roomname like ? ok 19 Execute it with parameter '%f%' ok 20 And now get the result ok 21 Prepare select * from rooms where facility like ? and roomname not like ? ok 22 Execute it with parameters '%o', 'mi%' ok 23 And now get the result ok 24 Prepare select facility, roomname from rooms where (facility = :fac or facility = :fac1) and roomname not like :name ok 25 Bind named parameters: Film, Main, Bay% ok 26 And now get the result ok 27 Check attributes NAME, TYPE, PRECISION ok 28 Prepare select facility, roomname from rooms where roomname like :bay or facility = :film ok 29 Bind named parameters in execute call ok 30 And now get the result ok 31 Prepare select (id + 9) / 3, msg message, dates as Datum from test where id > 2 + ? ok 32 Bind -1 (to make it into id > 1) ok 33 Check the names of the fields to return ok 34 Fetch the resulting row ok 35 Prepare select * from test order by id ok 36 Execute it ok 37 And now get the result ok 38 Prepare command `select facility,roomname from rooms where roomname > ? or facility = ? order by facility DESC, roomname' ok 39 Execute it with bind parameters ('F', 'Audio') ok 40 And now get the result ok 41 Prepare select * from test where msg = ? order by id ok 42 Execute it with parameter ('Message no 3') ok 43 And now get the result ok 44 Execute it with parameter ('Record no 1') ok 45 And now get the result ok 46 selectrow_array select test.msg from test where test.id = ? with 3 ok 47 ok t/7_dbd_select_func.t .. 1..31 DBI loaded ok 1 Connect to dbi:XBase:t ok 2 Prepare command `select ID, MSG from test' ok 3 Test the NAME attribute of the sth ok 4 Execute the command ok 5 Read the data and test them ok 6 Prepare command `select ID cislo, ID + 1, ID - ? from test' ok 7 Test the NAME attribute of the sth ok 8 Execute the command with value 5 ok 9 Read the data and test them ok 10 Prepare command `select 1 jedna, id, ? parametr from test where id = ?' ok 11 Test the NAME attribute of the sth ok 12 Execute the command with values 8, 3 ok 13 Read the data and test them ok 14 Prepare command `select id, length(msg), msg txt from test where id < ?' ok 15 Test the NAME attribute of the sth ok 16 Execute the command with value 4 ok 17 Read the data and test them ok 18 Execute the command with value 16 ok 19 Read the data and test them (note that with bind params, it's string) ok 20 Prepare command `select (id + 5) || msg str, msg || ' datum ' || dates from test' ok 21 Test the NAME attribute of the sth ok 22 Execute the command ok 23 Read the data and test them ok 24 Prepare command `select concat(45, ' jezek', '-krtek') from test where id = 1' ok 25 Execute the command ok 26 Read the data and test them ok 27 Prepare command `select substr('jezek leze', 3, 7) cast, substring(trim(' krtek '), 0, 3) from test where id = 1' ok 28 Test the NAME attribute of the sth ok 29 Execute the command ok 30 Read the data and test them ok 31 ok t/8_dbd_delete.t ....... 1..7 DBI loaded ok 1 Unlinking write.dbf write.dbt We will make a copy of database files rooms.dbf Will use File::Copy ok 2 Connect to dbi:XBase:t ok 3 Prepare command `delete from write where facility != "Audio"' ok 4 Execute it ok 5 And now we should check if it worked Prepare and execute 'select * from write' ok 6 ok 7 ok t/8_dbd_insert.t ....... 1..9 DBI loaded ok 1 Unlinking write.dbf write.dbt We will make a copy of database files rooms.dbf Will use File::Copy ok 2 Connect to dbi:XBase:t ok 3 Prepare command `insert into write values ("new room", "new facility")' ok 4 Execute it ok 5 Prepare command `insert into write ( facility ) values ("Lights")' ok 6 Execute it ok 7 And now we should check if it worked Prepare and execute 'select * from write' ok 8 ok 9 Preparing insert into write(facility,roomname) values (?,?) ok t/8_dbd_update.t ....... 1..10 DBI loaded ok 1 Unlinking write.dbf write.dbt We will make a copy of database files rooms.dbf Will use File::Copy ok 2 Connect to dbi:XBase:t ok 3 Prepare command `update write set roomname = "ABC" where facility != "Audio"' ok 4 Execute it ok 5 And now we should check if it worked Prepare and execute 'select * from write' ok 6 ok 7 Now prepare update with bind parameters Command: update write set roomname = ?, facility = ? where facility = ? and roomname = ? ok 8 Execute it with 'Jezek', 'Krtek', 'Film', 'ABC' ok 9 Now check the result back ok 10 ok t/9_dbd_create.t ....... 1..16 DBI loaded ok 1 Unlinking newtable.dbf and newtable.dbt ok 2 Connect to dbi:XBase:t ok 3 Prepare command `create table newtable (name char(15), comment memo, uid date, float float(6,2), active boolean)' ok 4 Execute it ok 5 Check if both (dbf and dbt) files were created ok 6 ok 7 Check the new table using core XBase.pm Do new XBase('newtable') ok 8 Check the header of the newly created table ok 9 Will select from the newtable table. ok 10 Will drop the newtable table. ok 11 Will select from the newtable table (should fail). ok 12 ok 13 ok 14 ok 15 ok 16 ok All tests successful. Files=18, Tests=277, 1 wallclock secs ( 0.07 usr 0.01 sys + 0.53 cusr 0.13 csys = 0.74 CPU) Result: PASS make[1]: Leaving directory '/<>' create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep debian/rules override_dh_auto_install make[1]: Entering directory '/<>' dh_auto_install make -j2 install DESTDIR=/<>/debian/libdbd-xbase-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[2]: Entering directory '/<>' Manifying 2 pod documents Manifying 7 pod documents Installing /<>/debian/libdbd-xbase-perl/usr/share/perl5/XBase.pm Installing /<>/debian/libdbd-xbase-perl/usr/share/perl5/DBD/XBase.pm Installing /<>/debian/libdbd-xbase-perl/usr/share/perl5/XBase/SDBM.pm Installing /<>/debian/libdbd-xbase-perl/usr/share/perl5/XBase/Memo.pm Installing /<>/debian/libdbd-xbase-perl/usr/share/perl5/XBase/FAQ.pod Installing /<>/debian/libdbd-xbase-perl/usr/share/perl5/XBase/Base.pm Installing /<>/debian/libdbd-xbase-perl/usr/share/perl5/XBase/SQL.pm Installing /<>/debian/libdbd-xbase-perl/usr/share/perl5/XBase/Index.pm Installing /<>/debian/libdbd-xbase-perl/usr/share/man/man1/indexdump.1p Installing /<>/debian/libdbd-xbase-perl/usr/share/man/man1/dbfdump.1p Installing /<>/debian/libdbd-xbase-perl/usr/share/man/man3/XBase::Base.3pm Installing /<>/debian/libdbd-xbase-perl/usr/share/man/man3/XBase::FAQ.3pm Installing /<>/debian/libdbd-xbase-perl/usr/share/man/man3/XBase::SDBM.3pm Installing /<>/debian/libdbd-xbase-perl/usr/share/man/man3/XBase::Index.3pm Installing /<>/debian/libdbd-xbase-perl/usr/share/man/man3/DBD::XBase.3pm Installing /<>/debian/libdbd-xbase-perl/usr/share/man/man3/XBase::Memo.3pm Installing /<>/debian/libdbd-xbase-perl/usr/share/man/man3/XBase.3pm Installing /<>/debian/libdbd-xbase-perl/usr/bin/dbfdump Installing /<>/debian/libdbd-xbase-perl/usr/bin/indexdump make[2]: Leaving directory '/<>' # Renaming dbfdump and indexdump to dbf_dump and index_dump to avoid # filename clashes with shapelib (see bug #274792) mv /<>/debian/libdbd-xbase-perl/usr/bin/dbfdump /<>/debian/libdbd-xbase-perl/usr/bin/dbf_dump mv /<>/debian/libdbd-xbase-perl/usr/bin/indexdump /<>/debian/libdbd-xbase-perl/usr/bin/index_dump mv /<>/debian/libdbd-xbase-perl/usr/share/man/man1/dbfdump.1p /<>/debian/libdbd-xbase-perl/usr/share/man/man1/dbf_dump.1p mv /<>/debian/libdbd-xbase-perl/usr/share/man/man1/indexdump.1p /<>/debian/libdbd-xbase-perl/usr/share/man/man1/index_dump.1p sed -i -e 's/DUMP/_DUMP/' /<>/debian/libdbd-xbase-perl/usr/share/man/man1/*.1p make[1]: Leaving directory '/<>' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libdbd-xbase-perl' in '../libdbd-xbase-perl_1.08-2_all.deb'. dpkg-genbuildinfo -O../libdbd-xbase-perl_1.08-2_amd64.buildinfo dpkg-genchanges -O../libdbd-xbase-perl_1.08-2_amd64.changes dpkg-genchanges: info: not including original source code in upload dpkg-source -Zxz --after-build . dpkg-buildpackage: info: binary and diff upload (original source NOT included) -------------------------------------------------------------------------------- Build finished at 2024-08-04T06:28:27Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ libdbd-xbase-perl_1.08-2_amd64.changes: --------------------------------------- Format: 1.8 Date: Mon, 13 Jun 2022 15:20:37 +0100 Source: libdbd-xbase-perl Binary: libdbd-xbase-perl Architecture: source all Version: 1:1.08-2 Distribution: perl-5.40-throwaway Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libdbd-xbase-perl - Perl module to access xbase files (optionally through DBI) Changes: libdbd-xbase-perl (1:1.08-2) unstable; urgency=medium . [ Salvatore Bonaccorso ] * Update Vcs-* headers for switch to salsa.debian.org . [ gregor herrmann ] * debian/*: replace ADTTMP with AUTOPKGTEST_TMP. . [ Debian Janitor ] * Trim trailing whitespace. * Bump debhelper from old 9 to 12. * Set debhelper-compat version in Build-Depends. . [ gregor herrmann ] * debian/watch: use uscan version 4. Checksums-Sha1: 2fd32cc2f6ac17aa871784bad8171095f56b69b5 1296 libdbd-xbase-perl_1.08-2.dsc 030055ed5f191c9decb9e39d662ceaaf19f185ca 9968 libdbd-xbase-perl_1.08-2.debian.tar.xz 2b19d717135f1f49b7fdc7a894a8ecfe180ed404 97400 libdbd-xbase-perl_1.08-2_all.deb fa6b09f2e4c72ad7bf8888569b29f24ba1c3a2e5 5133 libdbd-xbase-perl_1.08-2_amd64.buildinfo Checksums-Sha256: 7d1696a7b4be290f725b69fa408f12193498e3c0d3f06631bcb66654aca61d5f 1296 libdbd-xbase-perl_1.08-2.dsc abd8383ab7cd4da2a2695a60eab81830b61aff6bfd8a05c8d3e79c2d852d336d 9968 libdbd-xbase-perl_1.08-2.debian.tar.xz 9351ad570c8a421a0f96a809689291202feda770b789cf17b8b62a443e1480ad 97400 libdbd-xbase-perl_1.08-2_all.deb 857b29996a21d515c4fbeca0e012e0a241b5ac571c290138b2f739c1cf959b72 5133 libdbd-xbase-perl_1.08-2_amd64.buildinfo Files: 43ce3b0f52406286e5e4aebd5efdb44d 1296 perl optional libdbd-xbase-perl_1.08-2.dsc 410652864403834d71e91f943edb64f4 9968 perl optional libdbd-xbase-perl_1.08-2.debian.tar.xz 69f41e2ab19481f6172831aef009f2d1 97400 perl optional libdbd-xbase-perl_1.08-2_all.deb 3fe00f96569e9d112e2f1431ee71ef4d 5133 perl optional libdbd-xbase-perl_1.08-2_amd64.buildinfo +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: libdbd-xbase-perl Binary: libdbd-xbase-perl Architecture: all source Version: 1:1.08-2 Checksums-Md5: 43ce3b0f52406286e5e4aebd5efdb44d 1296 libdbd-xbase-perl_1.08-2.dsc 69f41e2ab19481f6172831aef009f2d1 97400 libdbd-xbase-perl_1.08-2_all.deb Checksums-Sha1: 2fd32cc2f6ac17aa871784bad8171095f56b69b5 1296 libdbd-xbase-perl_1.08-2.dsc 2b19d717135f1f49b7fdc7a894a8ecfe180ed404 97400 libdbd-xbase-perl_1.08-2_all.deb Checksums-Sha256: 7d1696a7b4be290f725b69fa408f12193498e3c0d3f06631bcb66654aca61d5f 1296 libdbd-xbase-perl_1.08-2.dsc 9351ad570c8a421a0f96a809689291202feda770b789cf17b8b62a443e1480ad 97400 libdbd-xbase-perl_1.08-2_all.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Sun, 04 Aug 2024 06:28:27 +0000 Build-Path: /<> Build-Tainted-By: merged-usr-via-aliased-dirs usr-local-has-programs Installed-Build-Depends: autoconf (= 2.71-3), automake (= 1:1.16.5-1.3), autopoint (= 0.22.5-2), autotools-dev (= 20220109.1), base-files (= 13.4), base-passwd (= 3.6.4), bash (= 5.2.21-2.1), binutils (= 2.42.90.20240720-2), binutils-common (= 2.42.90.20240720-2), binutils-x86-64-linux-gnu (= 2.42.90.20240720-2), bsdextrautils (= 2.40.2-1), bsdutils (= 1:2.40.2-1), build-essential (= 12.10), bzip2 (= 1.0.8-5.1), coreutils (= 9.4-3.1), cpp (= 4:14.1.0-2), cpp-13 (= 13.3.0-4), cpp-13-x86-64-linux-gnu (= 13.3.0-4), cpp-14 (= 14.2.0-1), cpp-14-x86-64-linux-gnu (= 14.2.0-1), cpp-x86-64-linux-gnu (= 4:14.1.0-2), dash (= 0.5.12-9), debconf (= 1.5.87), debhelper (= 13.16), debianutils (= 5.20), dh-autoreconf (= 20), dh-strip-nondeterminism (= 1.14.0-1), diffutils (= 1:3.10-1), dpkg (= 1.22.11), dpkg-dev (= 1.22.11), dwz (= 0.15-1+b1), file (= 1:5.45-3), findutils (= 4.10.0-2), g++ (= 4:14.1.0-2), g++-14 (= 14.2.0-1), g++-14-x86-64-linux-gnu (= 14.2.0-1), g++-x86-64-linux-gnu (= 4:14.1.0-2), gcc (= 4:14.1.0-2), gcc-13 (= 13.3.0-4), gcc-13-base (= 13.3.0-4), gcc-13-x86-64-linux-gnu (= 13.3.0-4), gcc-14 (= 14.2.0-1), gcc-14-base (= 14.2.0-1), gcc-14-x86-64-linux-gnu (= 14.2.0-1), gcc-x86-64-linux-gnu (= 4:14.1.0-2), gettext (= 0.22.5-2), gettext-base (= 0.22.5-2), grep (= 3.11-4), groff-base (= 1.23.0-5), gzip (= 1.12-1.1), hostname (= 3.23+nmu2), init-system-helpers (= 1.66), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.3.2-2), libarchive-zip-perl (= 1.68-1), libasan8 (= 14.2.0-1), libatomic1 (= 14.2.0-1), libattr1 (= 1:2.5.2-1), libaudit-common (= 1:3.1.2-4), libaudit1 (= 1:3.1.2-4+b1), libbinutils (= 2.42.90.20240720-2), libblkid1 (= 2.40.2-1), libbz2-1.0 (= 1.0.8-5.1), libc-bin (= 2.39-6), libc-dev-bin (= 2.39-6), libc6 (= 2.39-6), libc6-dev (= 2.39-6), libcap-ng0 (= 0.8.5-1+b1), libcap2 (= 1:2.66-5), libcc1-0 (= 14.2.0-1), libcrypt-dev (= 1:4.4.36-4), libcrypt1 (= 1:4.4.36-4), libctf-nobfd0 (= 2.42.90.20240720-2), libctf0 (= 2.42.90.20240720-2), libdb5.3t64 (= 5.3.28+dfsg2-7), libdbi-perl (= 1.643-4+b3), libdebconfclient0 (= 0.272), libdebhelper-perl (= 13.16), libdpkg-perl (= 1.22.11), libelf1t64 (= 0.191-2), libfile-stripnondeterminism-perl (= 1.14.0-1), libgcc-13-dev (= 13.3.0-4), libgcc-14-dev (= 14.2.0-1), libgcc-s1 (= 14.2.0-1), libgdbm-compat4t64 (= 1.23-6), libgdbm6t64 (= 1.23-6), libgmp10 (= 2:6.3.0+dfsg-2+b1), libgomp1 (= 14.2.0-1), libgprofng0 (= 2.42.90.20240720-2), libhwasan0 (= 14.2.0-1), libicu72 (= 72.1-5), libisl23 (= 0.26-3+b2), libitm1 (= 14.2.0-1), libjansson4 (= 2.14-2+b2), liblsan0 (= 14.2.0-1), liblzma5 (= 5.6.2-2), libmagic-mgc (= 1:5.45-3), libmagic1t64 (= 1:5.45-3), libmd0 (= 1.1.0-2), libmount1 (= 2.40.2-1), libmpc3 (= 1.3.1-1+b2), libmpfr6 (= 4.2.1-1+b1), libpam-modules (= 1.5.3-7), libpam-modules-bin (= 1.5.3-7), libpam-runtime (= 1.5.3-7), libpam0g (= 1.5.3-7), libpcre2-8-0 (= 10.42-4+b1), libperl5.40 (= 5.40.0-1), libpipeline1 (= 1.5.7-2), libquadmath0 (= 14.2.0-1), libseccomp2 (= 2.5.5-1+b1), libselinux1 (= 3.5-2+b3), libsframe1 (= 2.42.90.20240720-2), libsmartcols1 (= 2.40.2-1), libssl3t64 (= 3.3.1-2), libstdc++-14-dev (= 14.2.0-1), libstdc++6 (= 14.2.0-1), libsystemd0 (= 256.4-2), libtinfo6 (= 6.5-2), libtool (= 2.4.7-7), libtsan2 (= 14.2.0-1), libubsan1 (= 14.2.0-1), libuchardet0 (= 0.0.8-1+b1), libudev1 (= 256.4-2), libunistring5 (= 1.2-1), libuuid1 (= 2.40.2-1), libxml2 (= 2.12.7+dfsg-3+b1), libzstd1 (= 1.5.6+dfsg-1), linux-libc-dev (= 6.9.12-1), m4 (= 1.4.19-4), make (= 4.3-4.1), man-db (= 2.12.1-2), mawk (= 1.3.4.20240622-2), ncurses-base (= 6.5-2), ncurses-bin (= 6.5-2), patch (= 2.7.6-7), perl (= 5.40.0-1), perl-base (= 5.40.0-1), perl-modules-5.40 (= 5.40.0-1), po-debconf (= 1.0.21+nmu1), rpcsvc-proto (= 1.4.3-1), sed (= 4.9-2), sensible-utils (= 0.0.24), sysvinit-utils (= 3.09-2), tar (= 1.35+dfsg-3), usr-is-merged (= 39), util-linux (= 2.40.2-1), xz-utils (= 5.6.2-2), zlib1g (= 1:1.3.dfsg+really1.3.1-1) Environment: DEB_BUILD_OPTIONS="parallel=2" LANG="C.UTF-8" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" SOURCE_DATE_EPOCH="1655130037" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ libdbd-xbase-perl_1.08-2_all.deb -------------------------------- new Debian package, version 2.0. size 97400 bytes: control archive=1524 bytes. 720 bytes, 17 lines control 2061 bytes, 29 lines md5sums Package: libdbd-xbase-perl Version: 1:1.08-2 Architecture: all Maintainer: Debian Perl Group Installed-Size: 261 Depends: perl:any, libdbi-perl Section: perl Priority: optional Homepage: https://metacpan.org/release/DBD-XBase Description: Perl module to access xbase files (optionally through DBI) DBD::XBase allows creation, access and modification of .dbf (dBase, Clipper, Fox* style) database files. It is capable of handling memo files, but indexes only in a somewhat limited way. It has two interfaces: one using SQL commands (through DBI) ad the other with a simple OO interface. . You can use the included dbf_dump program to dump the content of a .dbf file. drwxr-xr-x root/root 0 2022-06-13 14:20 ./ drwxr-xr-x root/root 0 2022-06-13 14:20 ./usr/ drwxr-xr-x root/root 0 2022-06-13 14:20 ./usr/bin/ -rwxr-xr-x root/root 4271 2022-06-13 14:20 ./usr/bin/dbf_dump -rwxr-xr-x root/root 2495 2022-06-13 14:20 ./usr/bin/index_dump drwxr-xr-x root/root 0 2022-06-13 14:20 ./usr/share/ drwxr-xr-x root/root 0 2022-06-13 14:20 ./usr/share/doc/ drwxr-xr-x root/root 0 2022-06-13 14:20 ./usr/share/doc/libdbd-xbase-perl/ -rw-r--r-- root/root 3733 2022-06-13 14:20 ./usr/share/doc/libdbd-xbase-perl/README -rw-r--r-- root/root 459 2022-06-13 14:20 ./usr/share/doc/libdbd-xbase-perl/README.Debian -rw-r--r-- root/root 1517 2015-05-04 06:17 ./usr/share/doc/libdbd-xbase-perl/ToDo -rw-r--r-- root/root 893 2022-06-13 14:20 ./usr/share/doc/libdbd-xbase-perl/changelog.Debian.gz -rw-r--r-- root/root 8650 2017-01-16 09:43 ./usr/share/doc/libdbd-xbase-perl/changelog.gz -rw-r--r-- root/root 1247 2022-06-13 14:20 ./usr/share/doc/libdbd-xbase-perl/copyright -rw-r--r-- root/root 5537 2022-06-13 14:20 ./usr/share/doc/libdbd-xbase-perl/driver_characteristics.gz drwxr-xr-x root/root 0 2022-06-13 14:20 ./usr/share/doc/libdbd-xbase-perl/examples/ -rwxr-xr-x root/root 952 2000-08-08 07:27 ./usr/share/doc/libdbd-xbase-perl/examples/copy_table -rwxr-xr-x root/root 714 2000-08-08 07:27 ./usr/share/doc/libdbd-xbase-perl/examples/create_table -rw-r--r-- root/root 2856 2022-06-13 14:20 ./usr/share/doc/libdbd-xbase-perl/examples/use_index drwxr-xr-x root/root 0 2022-06-13 14:20 ./usr/share/man/ drwxr-xr-x root/root 0 2022-06-13 14:20 ./usr/share/man/man1/ -rw-r--r-- root/root 1712 2022-06-13 14:20 ./usr/share/man/man1/dbf_dump.1p.gz -rw-r--r-- root/root 1399 2022-06-13 14:20 ./usr/share/man/man1/index_dump.1p.gz drwxr-xr-x root/root 0 2022-06-13 14:20 ./usr/share/man/man3/ -rw-r--r-- root/root 3540 2022-06-13 14:20 ./usr/share/man/man3/DBD::XBase.3pm.gz -rw-r--r-- root/root 6610 2022-06-13 14:20 ./usr/share/man/man3/XBase.3pm.gz -rw-r--r-- root/root 1934 2022-06-13 14:20 ./usr/share/man/man3/XBase::Base.3pm.gz -rw-r--r-- root/root 5146 2022-06-13 14:20 ./usr/share/man/man3/XBase::FAQ.3pm.gz -rw-r--r-- root/root 4659 2022-06-13 14:20 ./usr/share/man/man3/XBase::Index.3pm.gz -rw-r--r-- root/root 1363 2022-06-13 14:20 ./usr/share/man/man3/XBase::Memo.3pm.gz -rw-r--r-- root/root 1526 2022-06-13 14:20 ./usr/share/man/man3/XBase::SDBM.3pm.gz drwxr-xr-x root/root 0 2022-06-13 14:20 ./usr/share/perl5/ drwxr-xr-x root/root 0 2022-06-13 14:20 ./usr/share/perl5/DBD/ -rw-r--r-- root/root 24172 2022-06-13 14:20 ./usr/share/perl5/DBD/XBase.pm -rw-r--r-- root/root 40548 2022-06-13 14:20 ./usr/share/perl5/XBase.pm drwxr-xr-x root/root 0 2022-06-13 14:20 ./usr/share/perl5/XBase/ -rw-r--r-- root/root 9537 2022-06-13 14:20 ./usr/share/perl5/XBase/Base.pm -rw-r--r-- root/root 9115 2022-06-13 14:20 ./usr/share/perl5/XBase/FAQ.pod -rw-r--r-- root/root 54970 2022-06-13 14:20 ./usr/share/perl5/XBase/Index.pm -rw-r--r-- root/root 8253 2022-06-13 14:20 ./usr/share/perl5/XBase/Memo.pm -rw-r--r-- root/root 9833 2015-05-04 06:17 ./usr/share/perl5/XBase/SDBM.pm -rw-r--r-- root/root 20625 2016-05-03 09:33 ./usr/share/perl5/XBase/SQL.pm +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Type: full Build-Space: 2064 Build-Time: 4 Distribution: perl-5.40-throwaway Host Architecture: amd64 Install-Time: 4 Job: /srv/debomatic/incoming/libdbd-xbase-perl_1.08-2.dsc Machine Architecture: amd64 Package: libdbd-xbase-perl Package-Time: 17 Source-Version: 1:1.08-2 Space: 2064 Status: successful Version: 1:1.08-2 -------------------------------------------------------------------------------- Finished at 2024-08-04T06:28:27Z Build needed 00:00:17, 2064k disk space