sbuild (Debian sbuild) 0.85.10 (30 May 2024) on carme.larted.org.uk

+==============================================================================+
| libcpan-reporter-perl 1.2019-1 (amd64)       Sun, 04 Aug 2024 05:49:03 +0000 |
+==============================================================================+

Package: libcpan-reporter-perl
Version: 1.2019-1
Source Version: 1.2019-1
Distribution: perl-5.40-throwaway
Machine Architecture: amd64
Host Architecture: amd64
Build Architecture: amd64
Build Type: full

I: NOTICE: Log filtering will replace 'var/run/schroot/mount/perl-5.40-amd64-debomatic-4a80acf6-83ba-4c5e-bc67-a7057404b550' with '<<CHROOT>>'

+------------------------------------------------------------------------------+
| Chroot Setup Commands                                                        |
+------------------------------------------------------------------------------+


/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libcpan-reporter-perl_1.2019-1 perl-5.40-throwaway amd64
-------------------------------------------------------------------------------------------------------------------------------


I: Finished running '/usr/share/debomatic/sbuildcommands/chroot-setup-commands/dpkg-speedup libcpan-reporter-perl_1.2019-1 perl-5.40-throwaway amd64'.

Finished processing commands.
--------------------------------------------------------------------------------
I: NOTICE: Log filtering will replace 'build/libcpan-reporter-perl-IH3x4x/resolver-0vuMWH' with '<<RESOLVERDIR>>'

+------------------------------------------------------------------------------+
| Update chroot                                                                |
+------------------------------------------------------------------------------+

Get:1 file:/srv/reprepro perl-5.40 InRelease [3042 B]
Hit:2 http://deb.debian.org/debian unstable InRelease
Hit:3 http://localhost:3142/debian sid InRelease
Get:1 file:/srv/reprepro perl-5.40 InRelease [3042 B]
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

+------------------------------------------------------------------------------+
| Fetch source files                                                           |
+------------------------------------------------------------------------------+


Local sources
-------------

/srv/debomatic/incoming/libcpan-reporter-perl_1.2019-1.dsc exists in /srv/debomatic/incoming; copying to chroot
I: NOTICE: Log filtering will replace 'build/libcpan-reporter-perl-IH3x4x/libcpan-reporter-perl-1.2019' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/libcpan-reporter-perl-IH3x4x' with '<<BUILDDIR>>'

+------------------------------------------------------------------------------+
| Install package build dependencies                                           |
+------------------------------------------------------------------------------+


Setup apt archive
-----------------

Merged Build-Depends: debhelper-compat (= 13), build-essential, fakeroot, libcapture-tiny-perl, libconfig-tiny-perl, libdevel-autoflush-perl, libfile-homedir-perl, libfile-pushd-perl, libmodule-build-perl, libprobe-perl-perl, libtest-reporter-perl, perl
Filtered Build-Depends: debhelper-compat (= 13), build-essential, fakeroot, libcapture-tiny-perl, libconfig-tiny-perl, libdevel-autoflush-perl, libfile-homedir-perl, libfile-pushd-perl, libmodule-build-perl, libprobe-perl-perl, libtest-reporter-perl, perl
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [609 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [906 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [830 B]
Fetched 2345 B in 0s (0 B/s)
Reading package lists...
Reading package lists...

Install main build dependencies (apt-based resolver)
----------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  autoconf automake autopoint autotools-dev bsdextrautils debhelper
  dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base
  groff-base intltool-debian libarchive-zip-perl libcapture-tiny-perl
  libconfig-tiny-perl libdebhelper-perl libdevel-autoflush-perl libelf1t64
  libfakeroot libfile-homedir-perl libfile-pushd-perl
  libfile-stripnondeterminism-perl libfile-which-perl libicu72 libmagic-mgc
  libmagic1t64 libmodule-build-perl libpipeline1 libprobe-perl-perl
  libtest-reporter-perl libtool libuchardet0 libxml2 m4 man-db po-debconf
  sensible-utils
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc
  libasprintf-dev libgettextpo-dev groff libtool-doc gfortran
  | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser
  libmail-box-perl
Recommended packages:
  curl | wget | lynx libarchive-cpio-perl libmodule-signature-perl
  libpod-readme-perl libsoftware-license-perl libmailtools-perl
  libnet-dns-perl libltdl-dev libmail-sendmail-perl
The following NEW packages will be installed:
  autoconf automake autopoint autotools-dev bsdextrautils debhelper
  dh-autoreconf dh-strip-nondeterminism dwz fakeroot file gettext gettext-base
  groff-base intltool-debian libarchive-zip-perl libcapture-tiny-perl
  libconfig-tiny-perl libdebhelper-perl libdevel-autoflush-perl libelf1t64
  libfakeroot libfile-homedir-perl libfile-pushd-perl
  libfile-stripnondeterminism-perl libfile-which-perl libicu72 libmagic-mgc
  libmagic1t64 libmodule-build-perl libpipeline1 libprobe-perl-perl
  libtest-reporter-perl libtool libuchardet0 libxml2 m4 man-db po-debconf
  sbuild-build-depends-main-dummy sensible-utils
0 upgraded, 41 newly installed, 0 to remove and 0 not upgraded.
Need to get 20.1 MB of archives.
After this operation, 76.4 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [960 B]
Get:2 http://deb.debian.org/debian unstable/main amd64 sensible-utils all 0.0.24 [24.8 kB]
Get:3 http://deb.debian.org/debian unstable/main amd64 libmagic-mgc amd64 1:5.45-3 [314 kB]
Get:4 http://deb.debian.org/debian unstable/main amd64 libmagic1t64 amd64 1:5.45-3 [105 kB]
Get:5 http://deb.debian.org/debian unstable/main amd64 file amd64 1:5.45-3 [42.9 kB]
Get:6 http://deb.debian.org/debian unstable/main amd64 gettext-base amd64 0.22.5-2 [200 kB]
Get:7 http://deb.debian.org/debian unstable/main amd64 libuchardet0 amd64 0.0.8-1+b1 [68.8 kB]
Get:8 http://deb.debian.org/debian unstable/main amd64 groff-base amd64 1.23.0-5 [1181 kB]
Get:9 http://deb.debian.org/debian unstable/main amd64 bsdextrautils amd64 2.40.2-1 [96.1 kB]
Get:10 http://deb.debian.org/debian unstable/main amd64 libpipeline1 amd64 1.5.7-2 [38.0 kB]
Get:11 http://deb.debian.org/debian unstable/main amd64 man-db amd64 2.12.1-2 [1411 kB]
Get:12 http://deb.debian.org/debian unstable/main amd64 m4 amd64 1.4.19-4 [287 kB]
Get:13 http://deb.debian.org/debian unstable/main amd64 autoconf all 2.71-3 [332 kB]
Get:14 http://deb.debian.org/debian unstable/main amd64 autotools-dev all 20220109.1 [51.6 kB]
Get:15 http://deb.debian.org/debian unstable/main amd64 automake all 1:1.16.5-1.3 [823 kB]
Get:16 http://deb.debian.org/debian unstable/main amd64 autopoint all 0.22.5-2 [723 kB]
Get:17 http://deb.debian.org/debian unstable/main amd64 libdebhelper-perl all 13.16 [88.6 kB]
Get:18 http://deb.debian.org/debian unstable/main amd64 libtool all 2.4.7-7 [517 kB]
Get:19 http://deb.debian.org/debian unstable/main amd64 dh-autoreconf all 20 [17.1 kB]
Get:20 http://deb.debian.org/debian unstable/main amd64 libarchive-zip-perl all 1.68-1 [104 kB]
Get:21 http://deb.debian.org/debian unstable/main amd64 libfile-stripnondeterminism-perl all 1.14.0-1 [19.5 kB]
Get:22 http://deb.debian.org/debian unstable/main amd64 dh-strip-nondeterminism all 1.14.0-1 [8448 B]
Get:23 http://deb.debian.org/debian unstable/main amd64 libelf1t64 amd64 0.191-2 [188 kB]
Get:24 http://deb.debian.org/debian unstable/main amd64 dwz amd64 0.15-1+b1 [110 kB]
Get:25 http://deb.debian.org/debian unstable/main amd64 libicu72 amd64 72.1-5 [9396 kB]
Get:26 http://deb.debian.org/debian unstable/main amd64 libxml2 amd64 2.12.7+dfsg-3+b1 [671 kB]
Get:27 http://deb.debian.org/debian unstable/main amd64 gettext amd64 0.22.5-2 [1601 kB]
Get:28 http://deb.debian.org/debian unstable/main amd64 intltool-debian all 0.35.0+20060710.6 [22.9 kB]
Get:29 http://deb.debian.org/debian unstable/main amd64 po-debconf all 1.0.21+nmu1 [248 kB]
Get:30 http://deb.debian.org/debian unstable/main amd64 debhelper all 13.16 [891 kB]
Get:31 http://deb.debian.org/debian unstable/main amd64 libfakeroot amd64 1.35.1-1 [28.6 kB]
Get:32 http://deb.debian.org/debian unstable/main amd64 fakeroot amd64 1.35.1-1 [74.5 kB]
Get:33 http://deb.debian.org/debian unstable/main amd64 libcapture-tiny-perl all 0.48-2 [24.6 kB]
Get:34 http://deb.debian.org/debian unstable/main amd64 libconfig-tiny-perl all 2.30-1 [18.9 kB]
Get:35 http://deb.debian.org/debian unstable/main amd64 libdevel-autoflush-perl all 0.06-3 [8424 B]
Get:36 http://deb.debian.org/debian unstable/main amd64 libfile-which-perl all 1.27-2 [15.1 kB]
Get:37 http://deb.debian.org/debian unstable/main amd64 libfile-homedir-perl all 1.006-2 [42.4 kB]
Get:38 http://deb.debian.org/debian unstable/main amd64 libfile-pushd-perl all 1.016-2 [13.5 kB]
Get:39 http://deb.debian.org/debian unstable/main amd64 libmodule-build-perl all 0.423400-2 [252 kB]
Get:40 http://deb.debian.org/debian unstable/main amd64 libprobe-perl-perl all 0.03-3 [8656 B]
Get:41 http://deb.debian.org/debian unstable/main amd64 libtest-reporter-perl all 1.62-2 [31.5 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 20.1 MB in 0s (119 MB/s)
Selecting previously unselected package sensible-utils.
(Reading database ... 22966 files and directories currently installed.)
Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ...
Unpacking sensible-utils (0.0.24) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ...
Unpacking libmagic-mgc (1:5.45-3) ...
Selecting previously unselected package libmagic1t64:amd64.
Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ...
Unpacking libmagic1t64:amd64 (1:5.45-3) ...
Selecting previously unselected package file.
Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ...
Unpacking file (1:5.45-3) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ...
Unpacking gettext-base (0.22.5-2) ...
Selecting previously unselected package libuchardet0:amd64.
Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ...
Unpacking libuchardet0:amd64 (0.0.8-1+b1) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ...
Unpacking groff-base (1.23.0-5) ...
Selecting previously unselected package bsdextrautils.
Preparing to unpack .../07-bsdextrautils_2.40.2-1_amd64.deb ...
Unpacking bsdextrautils (2.40.2-1) ...
Selecting previously unselected package libpipeline1:amd64.
Preparing to unpack .../08-libpipeline1_1.5.7-2_amd64.deb ...
Unpacking libpipeline1:amd64 (1.5.7-2) ...
Selecting previously unselected package man-db.
Preparing to unpack .../09-man-db_2.12.1-2_amd64.deb ...
Unpacking man-db (2.12.1-2) ...
Selecting previously unselected package m4.
Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ...
Unpacking m4 (1.4.19-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../11-autoconf_2.71-3_all.deb ...
Unpacking autoconf (2.71-3) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ...
Unpacking autotools-dev (20220109.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ...
Unpacking automake (1:1.16.5-1.3) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ...
Unpacking autopoint (0.22.5-2) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../15-libdebhelper-perl_13.16_all.deb ...
Unpacking libdebhelper-perl (13.16) ...
Selecting previously unselected package libtool.
Preparing to unpack .../16-libtool_2.4.7-7_all.deb ...
Unpacking libtool (2.4.7-7) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../17-dh-autoreconf_20_all.deb ...
Unpacking dh-autoreconf (20) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ...
Unpacking libarchive-zip-perl (1.68-1) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.14.0-1) ...
Selecting previously unselected package libelf1t64:amd64.
Preparing to unpack .../21-libelf1t64_0.191-2_amd64.deb ...
Unpacking libelf1t64:amd64 (0.191-2) ...
Selecting previously unselected package dwz.
Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ...
Unpacking dwz (0.15-1+b1) ...
Selecting previously unselected package libicu72:amd64.
Preparing to unpack .../23-libicu72_72.1-5_amd64.deb ...
Unpacking libicu72:amd64 (72.1-5) ...
Selecting previously unselected package libxml2:amd64.
Preparing to unpack .../24-libxml2_2.12.7+dfsg-3+b1_amd64.deb ...
Unpacking libxml2:amd64 (2.12.7+dfsg-3+b1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ...
Unpacking gettext (0.22.5-2) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.6) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ...
Unpacking po-debconf (1.0.21+nmu1) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../28-debhelper_13.16_all.deb ...
Unpacking debhelper (13.16) ...
Selecting previously unselected package libfakeroot:amd64.
Preparing to unpack .../29-libfakeroot_1.35.1-1_amd64.deb ...
Unpacking libfakeroot:amd64 (1.35.1-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../30-fakeroot_1.35.1-1_amd64.deb ...
Unpacking fakeroot (1.35.1-1) ...
Selecting previously unselected package libcapture-tiny-perl.
Preparing to unpack .../31-libcapture-tiny-perl_0.48-2_all.deb ...
Unpacking libcapture-tiny-perl (0.48-2) ...
Selecting previously unselected package libconfig-tiny-perl.
Preparing to unpack .../32-libconfig-tiny-perl_2.30-1_all.deb ...
Unpacking libconfig-tiny-perl (2.30-1) ...
Selecting previously unselected package libdevel-autoflush-perl.
Preparing to unpack .../33-libdevel-autoflush-perl_0.06-3_all.deb ...
Unpacking libdevel-autoflush-perl (0.06-3) ...
Selecting previously unselected package libfile-which-perl.
Preparing to unpack .../34-libfile-which-perl_1.27-2_all.deb ...
Unpacking libfile-which-perl (1.27-2) ...
Selecting previously unselected package libfile-homedir-perl.
Preparing to unpack .../35-libfile-homedir-perl_1.006-2_all.deb ...
Unpacking libfile-homedir-perl (1.006-2) ...
Selecting previously unselected package libfile-pushd-perl.
Preparing to unpack .../36-libfile-pushd-perl_1.016-2_all.deb ...
Unpacking libfile-pushd-perl (1.016-2) ...
Selecting previously unselected package libmodule-build-perl.
Preparing to unpack .../37-libmodule-build-perl_0.423400-2_all.deb ...
Adding 'diversion of /usr/bin/config_data to /usr/bin/config_data.diverted by libmodule-build-perl'
Adding 'diversion of /usr/share/man/man1/config_data.1.gz to /usr/share/man/man1/config_data.diverted.1.gz by libmodule-build-perl'
Unpacking libmodule-build-perl (0.423400-2) ...
Selecting previously unselected package libprobe-perl-perl.
Preparing to unpack .../38-libprobe-perl-perl_0.03-3_all.deb ...
Unpacking libprobe-perl-perl (0.03-3) ...
Selecting previously unselected package libtest-reporter-perl.
Preparing to unpack .../39-libtest-reporter-perl_1.62-2_all.deb ...
Unpacking libtest-reporter-perl (1.62-2) ...
Selecting previously unselected package sbuild-build-depends-main-dummy.
Preparing to unpack .../40-sbuild-build-depends-main-dummy_0.invalid.0_amd64.deb ...
Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ...
Setting up libpipeline1:amd64 (1.5.7-2) ...
Setting up libfile-which-perl (1.27-2) ...
Setting up libicu72:amd64 (72.1-5) ...
Setting up bsdextrautils (2.40.2-1) ...
Setting up libfile-pushd-perl (1.016-2) ...
Setting up libmagic-mgc (1:5.45-3) ...
Setting up libarchive-zip-perl (1.68-1) ...
Setting up libdebhelper-perl (13.16) ...
Setting up libmagic1t64:amd64 (1:5.45-3) ...
Setting up gettext-base (0.22.5-2) ...
Setting up m4 (1.4.19-4) ...
Setting up file (1:5.45-3) ...
Setting up libconfig-tiny-perl (2.30-1) ...
Setting up libprobe-perl-perl (0.03-3) ...
Setting up libdevel-autoflush-perl (0.06-3) ...
Setting up libfakeroot:amd64 (1.35.1-1) ...
Setting up libelf1t64:amd64 (0.191-2) ...
Setting up libmodule-build-perl (0.423400-2) ...
Setting up fakeroot (1.35.1-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up autotools-dev (20220109.1) ...
Setting up autopoint (0.22.5-2) ...
Setting up libtest-reporter-perl (1.62-2) ...
Setting up autoconf (2.71-3) ...
Setting up libcapture-tiny-perl (0.48-2) ...
Setting up dwz (0.15-1+b1) ...
Setting up sensible-utils (0.0.24) ...
Setting up libuchardet0:amd64 (0.0.8-1+b1) ...
Setting up libfile-homedir-perl (1.006-2) ...
Setting up libxml2:amd64 (2.12.7+dfsg-3+b1) ...
Setting up automake (1:1.16.5-1.3) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up libfile-stripnondeterminism-perl (1.14.0-1) ...
Setting up gettext (0.22.5-2) ...
Setting up libtool (2.4.7-7) ...
Setting up intltool-debian (0.35.0+20060710.6) ...
Setting up dh-autoreconf (20) ...
Setting up dh-strip-nondeterminism (1.14.0-1) ...
Setting up groff-base (1.23.0-5) ...
Setting up po-debconf (1.0.21+nmu1) ...
Setting up man-db (2.12.1-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up debhelper (13.16) ...
Setting up sbuild-build-depends-main-dummy (0.invalid.0) ...
Processing triggers for libc-bin (2.39-6) ...

+------------------------------------------------------------------------------+
| Check architectures                                                          |
+------------------------------------------------------------------------------+

Arch check ok (amd64 included in all)

+------------------------------------------------------------------------------+
| Build environment                                                            |
+------------------------------------------------------------------------------+

Kernel: Linux 6.9.7-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.9.7-1 (2024-06-27) amd64 (x86_64)
Toolchain package versions: binutils_2.42.90.20240720-2 dpkg-dev_1.22.11 g++-13_13.3.0-4 g++-14_14.2.0-1 gcc-13_13.3.0-4 gcc-14_14.2.0-1 libc6-dev_2.39-6 libstdc++-13-dev_13.3.0-4 libstdc++-14-dev_14.2.0-1 libstdc++6_14.2.0-1 linux-libc-dev_6.9.12-1
Package versions: adduser_3.137 apt_2.9.7 autoconf_2.71-3 automake_1:1.16.5-1.3 autopoint_0.22.5-2 autotools-dev_20220109.1 base-files_13.4 base-passwd_3.6.4 bash_5.2.21-2.1 binutils_2.42.90.20240720-2 binutils-common_2.42.90.20240720-2 binutils-x86-64-linux-gnu_2.42.90.20240720-2 bsdextrautils_2.40.2-1 bsdutils_1:2.40.2-1 build-essential_12.10 bzip2_1.0.8-5.1 coreutils_9.4-3.1 cpp_4:14.1.0-2 cpp-13_13.3.0-4 cpp-13-x86-64-linux-gnu_13.3.0-4 cpp-14_14.2.0-1 cpp-14-x86-64-linux-gnu_14.2.0-1 cpp-x86-64-linux-gnu_4:14.1.0-2 dash_0.5.12-9 debconf_1.5.87 debhelper_13.16 debian-archive-keyring_2023.4 debianutils_5.20 dh-autoreconf_20 dh-strip-nondeterminism_1.14.0-1 diffutils_1:3.10-1 dirmngr_2.2.43-8 dpkg_1.22.11 dpkg-dev_1.22.11 dwz_0.15-1+b1 eatmydata_131-2 fakeroot_1.35.1-1 file_1:5.45-3 findutils_4.10.0-2 g++_4:14.1.0-2 g++-13_13.3.0-4 g++-13-x86-64-linux-gnu_13.3.0-4 g++-14_14.2.0-1 g++-14-x86-64-linux-gnu_14.2.0-1 g++-x86-64-linux-gnu_4:14.1.0-2 gcc_4:14.1.0-2 gcc-13_13.3.0-4 gcc-13-base_13.3.0-4 gcc-13-x86-64-linux-gnu_13.3.0-4 gcc-14_14.2.0-1 gcc-14-base_14.2.0-1 gcc-14-x86-64-linux-gnu_14.2.0-1 gcc-x86-64-linux-gnu_4:14.1.0-2 gettext_0.22.5-2 gettext-base_0.22.5-2 gnupg_2.2.43-8 gnupg-l10n_2.2.43-8 gnupg-utils_2.2.43-8 gpg_2.2.43-8 gpg-agent_2.2.43-8 gpg-wks-client_2.2.43-8 gpgconf_2.2.43-8 gpgsm_2.2.43-8 gpgv_2.2.43-8 grep_3.11-4 groff-base_1.23.0-5 gzip_1.12-1.1 hostname_3.23+nmu2 init-system-helpers_1.66 intltool-debian_0.35.0+20060710.6 libacl1_2.3.2-2 libapt-pkg6.0t64_2.9.7 libarchive-zip-perl_1.68-1 libasan8_14.2.0-1 libassuan0_2.5.6-1+b1 libatomic1_14.2.0-1 libattr1_1:2.5.2-1 libaudit-common_1:3.1.2-4 libaudit1_1:3.1.2-4+b1 libbinutils_2.42.90.20240720-2 libblkid1_2.40.2-1 libbsd0_0.12.2-1 libbz2-1.0_1.0.8-5.1 libc-bin_2.39-6 libc-dev-bin_2.39-6 libc-l10n_2.39-6 libc6_2.39-6 libc6-dev_2.39-6 libcap-ng0_0.8.5-1+b1 libcap2_1:2.66-5 libcapture-tiny-perl_0.48-2 libcc1-0_14.2.0-1 libconfig-tiny-perl_2.30-1 libcrypt-dev_1:4.4.36-4 libcrypt1_1:4.4.36-4 libctf-nobfd0_2.42.90.20240720-2 libctf0_2.42.90.20240720-2 libdb5.3t64_5.3.28+dfsg2-7 libdebconfclient0_0.272 libdebhelper-perl_13.16 libdevel-autoflush-perl_0.06-3 libdpkg-perl_1.22.11 libeatmydata1_131-2 libelf1t64_0.191-2 libfakeroot_1.35.1-1 libffi8_3.4.6-1 libfile-homedir-perl_1.006-2 libfile-pushd-perl_1.016-2 libfile-stripnondeterminism-perl_1.14.0-1 libfile-which-perl_1.27-2 libgcc-13-dev_13.3.0-4 libgcc-14-dev_14.2.0-1 libgcc-s1_14.2.0-1 libgcrypt20_1.11.0-5 libgdbm-compat4t64_1.23-6 libgdbm6t64_1.23-6 libgmp10_2:6.3.0+dfsg-2+b1 libgnutls30t64_3.8.6-2 libgomp1_14.2.0-1 libgpg-error0_1.50-2 libgprofng0_2.42.90.20240720-2 libhogweed6t64_3.10-1 libhwasan0_14.2.0-1 libicu72_72.1-5 libidn2-0_2.3.7-2 libisl23_0.26-3+b2 libitm1_14.2.0-1 libjansson4_2.14-2+b2 libksba8_1.6.7-2 libldap-2.5-0_2.5.18+dfsg-2+b1 liblsan0_14.2.0-1 liblz4-1_1.9.4-3 liblzma5_5.6.2-2 libmagic-mgc_1:5.45-3 libmagic1t64_1:5.45-3 libmd0_1.1.0-2 libmodule-build-perl_0.423400-2 libmount1_2.40.2-1 libmpc3_1.3.1-1+b2 libmpfr6_4.2.1-1+b1 libncursesw6_6.5-2 libnettle8t64_3.10-1 libnpth0t64_1.6-3.1 libp11-kit0_0.25.5-2 libpam-modules_1.5.3-7 libpam-modules-bin_1.5.3-7 libpam-runtime_1.5.3-7 libpam0g_1.5.3-7 libpcre2-8-0_10.42-4+b1 libperl5.38t64_5.38.2-5 libperl5.40_5.40.0-1 libpipeline1_1.5.7-2 libprobe-perl-perl_0.03-3 libquadmath0_14.2.0-1 libreadline8t64_8.2-4 libsasl2-2_2.1.28+dfsg1-6 libsasl2-modules-db_2.1.28+dfsg1-6 libseccomp2_2.5.5-1+b1 libselinux1_3.5-2+b3 libsemanage-common_3.5-1 libsemanage2_3.5-1+b4 libsepol2_3.5-2+b1 libsframe1_2.42.90.20240720-2 libsmartcols1_2.40.2-1 libsqlite3-0_3.46.0-1 libssl3t64_3.3.1-2 libstdc++-13-dev_13.3.0-4 libstdc++-14-dev_14.2.0-1 libstdc++6_14.2.0-1 libsystemd0_256.4-2 libtasn1-6_4.19.0-3+b2 libtest-reporter-perl_1.62-2 libtinfo6_6.5-2 libtool_2.4.7-7 libtsan2_14.2.0-1 libubsan1_14.2.0-1 libuchardet0_0.0.8-1+b1 libudev1_256.4-2 libunistring5_1.2-1 libuuid1_2.40.2-1 libxml2_2.12.7+dfsg-3+b1 libxxhash0_0.8.2-2+b1 libzstd1_1.5.6+dfsg-1 linux-libc-dev_6.9.12-1 locales-all_2.39-6 login_1:4.15.3-3 m4_1.4.19-4 make_4.3-4.1 man-db_2.12.1-2 mawk_1.3.4.20240622-2 ncurses-base_6.5-2 ncurses-bin_6.5-2 passwd_1:4.15.3-3 patch_2.7.6-7 perl_5.40.0-1 perl-base_5.40.0-1 perl-modules-5.38_5.38.2-5 perl-modules-5.40_5.40.0-1 pinentry-curses_1.2.1-3+b2 po-debconf_1.0.21+nmu1 readline-common_8.2-4 rpcsvc-proto_1.4.3-1 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-2 sensible-utils_0.0.24 sysvinit-utils_3.09-2 tar_1.35+dfsg-3 usr-is-merged_39 util-linux_2.40.2-1 xz-utils_5.6.2-2 zlib1g_1:1.3.dfsg+really1.3.1-1

+------------------------------------------------------------------------------+
| Build                                                                        |
+------------------------------------------------------------------------------+


Unpack source
-------------

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 3.0 (quilt)
Source: libcpan-reporter-perl
Binary: libcpan-reporter-perl
Architecture: all
Version: 1.2019-1
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Uploaders: Marius Gavrilescu <marius@ieval.ro>
Homepage: https://metacpan.org/release/CPAN-Reporter
Standards-Version: 4.6.2
Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libcpan-reporter-perl
Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libcpan-reporter-perl.git
Testsuite: autopkgtest-pkg-perl
Build-Depends: debhelper-compat (= 13)
Build-Depends-Indep: libcapture-tiny-perl <!nocheck>, libconfig-tiny-perl <!nocheck>, libdevel-autoflush-perl <!nocheck>, libfile-homedir-perl <!nocheck>, libfile-pushd-perl <!nocheck>, libmodule-build-perl <!nocheck>, libprobe-perl-perl <!nocheck>, libtest-reporter-perl <!nocheck>, perl
Package-List:
 libcpan-reporter-perl deb perl optional arch=all
Checksums-Sha1:
 078a3349517e07ddade11959a6c9493630e8ca6a 116985 libcpan-reporter-perl_1.2019.orig.tar.gz
 25d49e55e893f95cf875393ac7c44a459684eefb 3244 libcpan-reporter-perl_1.2019-1.debian.tar.xz
Checksums-Sha256:
 8b0bad08c6ad9dbcbb4681eba1082af845d4fe897ae97c06187889832322b60b 116985 libcpan-reporter-perl_1.2019.orig.tar.gz
 9e3dadf707ace9befca47d8be8d0c6ebfe8206e6f42bde6044d5cc3d71bc5a18 3244 libcpan-reporter-perl_1.2019-1.debian.tar.xz
Files:
 ca3d9e060466fd8b564b10b652d3577b 116985 libcpan-reporter-perl_1.2019.orig.tar.gz
 1a5bf2fdd59a69259e7c2f8e0ce2a8d2 3244 libcpan-reporter-perl_1.2019-1.debian.tar.xz
Dgit: 49247605014128c82ce8c022e98febc9ae27eb5b debian archive/debian/1.2019-1 https://git.dgit.debian.org/libcpan-reporter-perl

-----BEGIN PGP SIGNATURE-----

iQKTBAEBCgB9FiEE0eExbpOnYKgQTYX6uzpoAYZJqgYFAmSZ4DtfFIAAAAAALgAo
aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldEQx
RTEzMTZFOTNBNzYwQTgxMDREODVGQUJCM0E2ODAxODY0OUFBMDYACgkQuzpoAYZJ
qgbsqA/+Kz488btMr18ul8bK6zTWl82UH8twldzZy02WF0uoGHiUh231e+53+d4j
1SPEthuhlPEUh3/5UF2Nh+4O+hNo32PRMqCRLtgAHI9e9z8Va/p8VcBBUdCU5tL6
lyx5M3X0hM3enw3IJGQQpgIXlAondZl20Fx/j/0xWcijf3pHS5RY7Cqyzvy6YuW6
KJhpblK8iPNVWlYXMArXKcLhtHaL4yTiPjHkNnXks8CTfn9bZezsA4UNnfzULCN6
/zGCsLOeC+lUexjQ1Woi3+nFO4yBA6hJJcamH/wi+zzhZTBrK+RrFW35BjiXThmx
/2kdPb1GkJlbwnwcu2MYYm6nOzOSOw2HJOUswiANZU/BrWF4ii/1Fi2yJTjSndMF
BuT5v82qP+nCMjcRBJzIf5Iu+PApd7F0COnKkYv/WksEo1goIz1nZxj7W/8LXo4W
Esc+xDN4NPPF8TM1NMfw5z6zWqXXNdETUIbbdpEqT/7RjDayrFDYxIHKhQRiHENz
YlPsMXLDu2sQt35BMCy6bsqn7JQTtndS+T0HU8WjrjICRrl6ZWPazVurowBdu/mP
VGmPAkGR7uPwDRimZySaEHJ0xdb0s9F7Z+xQAWIx7R+zXMeiuWd6sDLQJz/VMToZ
KX7GLvnGlyJlkNAz3nu99NkkBanrJpXxlt2zrmOVgiD3iACoddI=
=8lFc
-----END PGP SIGNATURE-----

gpgv: Signature made Mon Jun 26 19:00:11 2023 UTC
gpgv:                using RSA key D1E1316E93A760A8104D85FABB3A68018649AA06
gpgv: Can't check signature: No public key
dpkg-source: warning: cannot verify inline signature for ./libcpan-reporter-perl_1.2019-1.dsc: no acceptable signature found
dpkg-source: info: extracting libcpan-reporter-perl in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking libcpan-reporter-perl_1.2019.orig.tar.gz
dpkg-source: info: unpacking libcpan-reporter-perl_1.2019-1.debian.tar.xz

Check disk space
----------------

Sufficient free space for build

+------------------------------------------------------------------------------+
| Starting Timed Build Commands                                                |
+------------------------------------------------------------------------------+


/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libcpan-reporter-perl_1.2019-1 perl-5.40-throwaway amd64
-------------------------------------------------------------------------------------------------------------------------------


I: Finished running '/usr/share/debomatic/sbuildcommands/starting-build-commands/no-network libcpan-reporter-perl_1.2019-1 perl-5.40-throwaway amd64'.

Finished processing commands.
--------------------------------------------------------------------------------

User Environment
----------------

APT_CONFIG=/var/lib/sbuild/apt.conf
HOME=/sbuild-nonexistent
LANG=en_GB.UTF-8
LANGUAGE=en_GB:en
LC_ALL=C.UTF-8
LD_LIBRARY_PATH=/usr/lib/libeatmydata
LD_PRELOAD=libeatmydata.so
LOGNAME=debomatic
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/<<PKGBUILDDIR>>
SCHROOT_ALIAS_NAME=perl-5.40-throwaway-amd64-debomatic
SCHROOT_CHROOT_NAME=perl-5.40-amd64-debomatic
SCHROOT_COMMAND=env
SCHROOT_GID=110
SCHROOT_GROUP=sbuild
SCHROOT_SESSION_ID=perl-5.40-amd64-debomatic-4a80acf6-83ba-4c5e-bc67-a7057404b550
SCHROOT_UID=1002
SCHROOT_USER=debomatic
SHELL=/bin/sh
USER=debomatic

dpkg-buildpackage
-----------------

Command: dpkg-buildpackage --sanitize-env -us -uc -rfakeroot -Zxz
dpkg-buildpackage: info: source package libcpan-reporter-perl
dpkg-buildpackage: info: source version 1.2019-1
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by gregor herrmann <gregoa@debian.org>
 dpkg-source -Zxz --before-build .
dpkg-buildpackage: info: host architecture amd64
 debian/rules clean
dh clean
   dh_clean
 dpkg-source -Zxz -b .
dpkg-source: info: using source format '3.0 (quilt)'
dpkg-source: info: building libcpan-reporter-perl using existing ./libcpan-reporter-perl_1.2019.orig.tar.gz
dpkg-source: info: building libcpan-reporter-perl in libcpan-reporter-perl_1.2019-1.debian.tar.xz
dpkg-source: info: building libcpan-reporter-perl in libcpan-reporter-perl_1.2019-1.dsc
 debian/rules binary
dh binary
   dh_update_autotools_config
   dh_autoreconf
   dh_auto_configure
	/usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration -ffile-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -fstack-clash-protection -Wformat -Werror=format-security -fcf-protection -Wl,-z,relro"
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for CPAN::Reporter
Writing MYMETA.yml and MYMETA.json
   dh_auto_build
	make -j2
make[1]: Entering directory '/<<PKGBUILDDIR>>'
cp lib/CPAN/Reporter.pm blib/lib/CPAN/Reporter.pm
cp lib/CPAN/Reporter/PrereqCheck.pm blib/lib/CPAN/Reporter/PrereqCheck.pm
cp lib/CPAN/Reporter/API.pm blib/lib/CPAN/Reporter/API.pm
cp lib/CPAN/Reporter/Config.pm blib/lib/CPAN/Reporter/Config.pm
cp lib/CPAN/Reporter/History.pm blib/lib/CPAN/Reporter/History.pm
cp lib/CPAN/Reporter/FAQ.pm blib/lib/CPAN/Reporter/FAQ.pm
Manifying 6 pod documents
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   dh_auto_test
	make -j2 test TEST_VERBOSE=1
make[1]: Entering directory '/<<PKGBUILDDIR>>'
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# 
# Versions for all modules listed in MYMETA.json (including optional ones):
# 
# === Configure Requires ===
# 
#     Module               Want     Have
#     ------------------- ----- --------
#     ExtUtils::MakeMaker  6.17     7.70
#     perl                5.006 5.040000
# 
# === Configure Suggests ===
# 
#     Module      Want Have
#     -------- ------- ----
#     JSON::PP 2.27300 4.16
# 
# === Build Requires ===
# 
#     Module              Want Have
#     ------------------- ---- ----
#     ExtUtils::MakeMaker  any 7.70
# 
# === Test Requires ===
# 
#     Module                 Want     Have
#     --------------------- ----- --------
#     Archive::Tar           1.54 3.02_001
#     ExtUtils::MakeMaker    6.36     7.70
#     File::Copy              any     2.41
#     File::Spec             3.19     3.90
#     File::Spec::Functions   any     3.91
#     File::pushd            0.32    1.016
#     FindBin                 any     1.54
#     IO::Handle              any     1.55
#     Test::Harness           any     3.48
#     Test::More             0.62 1.302199
#     lib                     any     0.65
#     perl                  5.008 5.040000
#     warnings                any     1.70
# 
# === Test Recommends ===
# 
#     Module         Want     Have
#     ---------- -------- --------
#     CPAN::Meta 2.120900 2.150010
# 
# === Runtime Requires ===
# 
#     Module               Want     Have
#     ------------------- ----- --------
#     CPAN                 1.94     2.36
#     CPAN::Version         any   5.5003
#     Capture::Tiny         any     0.48
#     Carp                  any     1.54
#     Config::Tiny         2.08     2.30
#     Data::Dumper          any    2.189
#     Devel::Autoflush     0.04     0.06
#     Exporter              any     5.78
#     ExtUtils::MakeMaker  6.36     7.70
#     Fcntl                 any     1.18
#     File::Basename        any     2.86
#     File::Find            any     1.44
#     File::Glob            any     1.42
#     File::HomeDir        0.58    1.006
#     File::Path            any     2.18
#     File::Spec           3.19     3.90
#     File::Temp           0.16   0.2311
#     IO::File              any     1.55
#     IPC::Cmd             0.76     1.04
#     Parse::CPAN::Meta     any 2.150010
#     Probe::Perl           any     0.03
#     Test::Reporter       1.54     1.62
#     constant              any     1.33
#     perl                5.008 5.040000
#     strict                any     1.13
#     vars                  any     1.05
# 
t/00-report-prereqs.t .......... 
1..1
ok 1 - Reported prereqs
ok
t/01_CPAN_Reporter.t ........... 
1..9
ok 1 - require CPAN::Reporter;
ok 2 - require CPAN::Reporter::Config;
ok 3 - require CPAN::Reporter::History;
ok 4 - CPAN::Reporter->can('configure')
ok 5 - CPAN::Reporter->can('grade_PL')
ok 6 - CPAN::Reporter->can('grade_make')
ok 7 - CPAN::Reporter->can('grade_test')
ok 8 - CPAN::Reporter->can('record_command')
ok 9 - CPAN::Reporter->can('test')
ok
t/02_config_env_vars.t ......... 
1..10
ok 1 - require CPAN::Reporter;
ok 2 - require CPAN::Reporter::Config;
ok 3 - default config dir path
ok 4 - default config file path
ok 5 - PERL_CPAN_REPORTER_CONFIG: default config dir path
ok 6 - PERL_CPAN_REPORTER_CONFIG: alt config file path
ok 7 - PERL_CPAN_REPORTER_DIR: default config dir path
ok 8 - PERL_CPAN_REPORTER_DIR: alt config file path
ok 9 - DIR + CONFIG: alt config dir path
ok 10 - DIR + CONFIG: alt config file path
ok
t/03_config_file.t ............. 
1..62
ok 1 - created mock metabase file for testing
ok 2 - require CPAN::Reporter;
ok 3 - require CPAN::Reporter::Config;
ok 4 - get config dir path
ok 5 - get config file path
ok 6 - normalize id_file: /tmp/CPAN-Reporter-testhome-QVUjvU2d/.cpanreporter/metabase_id.json
ok 7 - normalize id_file: metabase_id.json
ok 8 - normalize id_file: /other/path.json
ok 9 - normalize id_file: other.json
ok 10 - normalize id_file: ~/other.json
ok 11 - no config file yet
ok 12 - opening non-existent file returns undef
ok 13 - opening non-existent file gives a warning
ok 14 - configure() returned true
ok 15 - saw 'transport' configuration prompt
ok 16 - saw 'send_report' configuration prompt
ok 17 - saw 'edit_report' configuration prompt
ok 18 - saw 'email_from' configuration prompt
ok 19 - configure() returned a hash reference
ok 20 - configure return value has expected defaults
ok 21 - configuration successfully created a config file
ok 22 - newly created config file has expected defaults
ok 23 - configure() is undef if file not readable
ok 24 - opening non-readable file gives a warning
ok 25 - config file reset to readable
ok 26 - configure() is undef if file not writeable
ok 27 - opening non-writeable file gives a warning
ok 28 - config file reset to writeable
ok 29 - updated config file with a new email address and smtp server
ok 30 - configure() ran again successfully
ok 31 - pre-existing email address was seen during configuration prompts
ok 32 - pre-existing smtp server was seen during configuration prompts
ok 33 - pre-existing debug prompt was seen during configuration prompts
ok 34 - updated config file preserved email address
ok 35 - updated config file preserved smtp server
ok 36 - updated config file preserved debug value
ok 37 - updated config file with a bad edit_report setting
ok 38 - bad option warning seen
ok 39 - edit_report default returned
ok 40 - bad edit_report preserved in config.ini
ok 41 - updated config file with a bad send_skipfile
ok 42 - bad send_skipfile option warning seen
ok 43 - send_skipfile default returned
ok 44 - bogus send_skipfile preserved in config.ini
ok 45 - generated a send_skipfile in the temp directory
ok 46 - updated config file with an absolute send_skipfile path
ok 47 - absolute send_skipfile ok
ok 48 - generated a send_skipfile in the config directory
ok 49 - generated a relative send_skipfile name
ok 50 - updated config file with a relative send_skipfile path
ok 51 - relative send_skipfile ok
ok 52 - updated config file with a bad cc_skipfile
ok 53 - bad cc_skipfile option warning seen
ok 54 - cc_skipfile default returned
ok 55 - bogus cc_skipfile preserved in config.ini
ok 56 - generated a cc_skipfile in the temp directory
ok 57 - updated config file with an absolute cc_skipfile path
ok 58 - absolute cc_skipfile ok
ok 59 - generated a cc_skipfile in the config directory
ok 60 - generated a relative cc_skipfile name
ok 61 - updated config file with a relative cc_skipfile path
ok 62 - relative cc_skipfile ok
ok
t/04_option_parsing.t .......... 
1..25
ok 1 - require CPAN::Reporter::Config;
ok 2 - empty input
ok 3 - No warnings seen
ok 4 - action (by itself)
ok 5 - No warnings seen
ok 6 - grade (by itself)
ok 7 - No warnings seen
ok 8 - default:action
ok 9 - No warnings seen
ok 10 - grade:action
ok 11 - No warnings seen
ok 12 - grade:action action
ok 13 - No warnings seen
ok 14 - grade:action action grade:action
ok 15 - No warnings seen
ok 16 - grade:action action grade2:action
ok 17 - No warnings seen
ok 18 - grade/grade2:action
ok 19 - No warnings seen
ok 20 - grade/grade2
ok 21 - No warnings seen
ok 22 - bad grade
ok 23 - bad grade
ok 24 - bad action
ok 25 - bad action
ok
t/05_prompting.t ............... 
1..21
ok 1 - require CPAN::Reporter;
ok 2 - 'default:yes' for 'pass'
ok 3 - 'default:yes' for 'fail'
ok 4 - 'default:yes' for 'na'
ok 5 - 'default:yes' for 'unknown'
ok 6 - 'default:no' for 'pass'
ok 7 - 'default:no' for 'fail'
ok 8 - 'default:no' for 'na'
ok 9 - 'default:no' for 'unknown'
ok 10 - 'default:ask/yes' for 'pass'
ok 11 - 'default:ask/yes' for 'fail'
ok 12 - 'default:ask/yes' for 'na'
ok 13 - 'default:ask/yes' for 'unknown'
ok 14 - 'default:ask/no' for 'pass'
ok 15 - 'default:ask/no' for 'fail'
ok 16 - 'default:ask/no' for 'na'
ok 17 - 'default:ask/no' for 'unknown'
ok 18 - 'default:ask/no fail:ask/yes na:yes unknown:no' for 'pass'
ok 19 - 'default:ask/no fail:ask/yes na:yes unknown:no' for 'fail'
ok 20 - 'default:ask/no fail:ask/yes na:yes unknown:no' for 'na'
ok 21 - 'default:ask/no fail:ask/yes na:yes unknown:no' for 'unknown'
ok
t/06_prompt_text.t ............. 
1..40
ok 1 - require CPAN::Reporter;
ok 2 - require CPAN::Reporter::History;
ok 3 - home directory mocked
ok 4 - config directory created
ok 5 - created mock metabase file for testing
ok 6 - created temp config file
ok 7 - Copying t-Fail to temp directory /tmp/OBxqww81ff
ok 8 - generate report for t-Fail
ok 9 - report was sent for t-Fail
ok 10 - saw report sent message for t-Fail
ok 11 - prompt for send_report
ok 12 - prompt for send_duplicates
ok 13 - prompt for edit_report
ok 14 - home directory mocked
ok 15 - config directory created
ok 16 - created mock metabase file for testing
ok 17 - created temp config file
ok 18 - Copying t-Fail to temp directory /tmp/1fcEskmRG5
ok 19 - generate report for t-Fail
ok 20 - report was sent for t-Fail
ok 21 - saw report sent message for t-Fail
ok 22 - prompt for send_test_report
ok 23 - home directory mocked
ok 24 - config directory created
ok 25 - created mock metabase file for testing
ok 26 - created temp config file
ok 27 - Copying make-Fail to temp directory /tmp/EUL4pH6ChM
ok 28 - generate report for t-Fail
ok 29 - report was sent for t-Fail
ok 30 - saw report sent message for t-Fail
ok 31 - prompt for send_make_report
ok 32 - home directory mocked
ok 33 - config directory created
ok 34 - created mock metabase file for testing
ok 35 - created temp config file
ok 36 - Copying PL-Fail to temp directory /tmp/AhSYCX71fK
ok 37 - generate report for t-Fail
ok 38 - report was sent for t-Fail
ok 39 - saw report sent message for t-Fail
ok 40 - prompt for send_PL_report
ok
t/10_prereq_check.t ............ 
1..10
ok 1 - require CPAN::Reporter::PrereqCheck;
ok 2 - _try_load for Module::Install
ok 3 - _try_load for Catalyst::DispatchType::Regex
ok 4 - _try_load for mylib
ok 5 - _try_load for Acme::Fake
ok 6 - _try_load for loading_conflicts
ok 7 - _try_load for load_before
ok 8 - file is not installed
ok 9 - module found
ok 10 - perl checked
ok
t/10_prereq_computed.t ......... 
1..1
ok 1
ok
t/10_prereq_pm.t ............... 
1..218
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - No requirements specified message correct
ok 7 - only one: 'requires' header
ok 8 - only one (requires): found 'Bogus::Broken' in report
ok 9 - only one (requires): 'Bogus::Broken' flag correct
ok 10 - only one (requires): 'Bogus::Broken' needed version correct
ok 11 - only one (requires): 'Bogus::Broken' installed version correct
ok 12 - only one (requires): found 'Bogus::Complex' in report
ok 13 - only one (requires): 'Bogus::Complex' flag correct
ok 14 - only one (requires): 'Bogus::Complex' needed version correct
ok 15 - only one (requires): 'Bogus::Complex' installed version correct
ok 16 - only one (requires): found 'Bogus::Conflict' in report
ok 17 - only one (requires): 'Bogus::Conflict' flag correct
ok 18 - only one (requires): 'Bogus::Conflict' needed version correct
ok 19 - only one (requires): 'Bogus::Conflict' installed version correct
ok 20 - only one (requires): found 'Bogus::Found' in report
ok 21 - only one (requires): 'Bogus::Found' flag correct
ok 22 - only one (requires): 'Bogus::Found' needed version correct
ok 23 - only one (requires): 'Bogus::Found' installed version correct
ok 24 - only one (requires): found 'Bogus::GT' in report
ok 25 - only one (requires): 'Bogus::GT' flag correct
ok 26 - only one (requires): 'Bogus::GT' needed version correct
ok 27 - only one (requires): 'Bogus::GT' installed version correct
ok 28 - only one (requires): found 'Bogus::GTE' in report
ok 29 - only one (requires): 'Bogus::GTE' flag correct
ok 30 - only one (requires): 'Bogus::GTE' needed version correct
ok 31 - only one (requires): 'Bogus::GTE' installed version correct
ok 32 - only one (requires): found 'Bogus::LT' in report
ok 33 - only one (requires): 'Bogus::LT' flag correct
ok 34 - only one (requires): 'Bogus::LT' needed version correct
ok 35 - only one (requires): 'Bogus::LT' installed version correct
ok 36 - only one (requires): found 'Bogus::LTE' in report
ok 37 - only one (requires): 'Bogus::LTE' flag correct
ok 38 - only one (requires): 'Bogus::LTE' needed version correct
ok 39 - only one (requires): 'Bogus::LTE' installed version correct
ok 40 - only one (requires): found 'Bogus::NotFound' in report
ok 41 - only one (requires): 'Bogus::NotFound' flag correct
ok 42 - only one (requires): 'Bogus::NotFound' needed version correct
ok 43 - only one (requires): 'Bogus::NotFound' installed version correct
ok 44 - only one (requires): found 'Bogus::NoVersion' in report
ok 45 - only one (requires): 'Bogus::NoVersion' flag correct
ok 46 - only one (requires): 'Bogus::NoVersion' needed version correct
ok 47 - only one (requires): 'Bogus::NoVersion' installed version correct
ok 48 - only one (requires): found 'Bogus::Shadow' in report
ok 49 - only one (requires): 'Bogus::Shadow' flag correct
ok 50 - only one (requires): 'Bogus::Shadow' needed version correct
ok 51 - only one (requires): 'Bogus::Shadow' installed version correct
ok 52 - only one (requires): found 'Bogus::TooOld' in report
ok 53 - only one (requires): 'Bogus::TooOld' flag correct
ok 54 - only one (requires): 'Bogus::TooOld' needed version correct
ok 55 - only one (requires): 'Bogus::TooOld' installed version correct
ok 56 - only one (requires): found 'perl' in report
ok 57 - only one (requires): 'perl' flag correct
ok 58 - only one (requires): 'perl' needed version correct
ok 59 - only one (requires): 'perl' installed version correct
ok 60 - only one: 'build_requires' header
ok 61 - only one (build_requires): found 'Bogus::Broken' in report
ok 62 - only one (build_requires): 'Bogus::Broken' flag correct
ok 63 - only one (build_requires): 'Bogus::Broken' needed version correct
ok 64 - only one (build_requires): 'Bogus::Broken' installed version correct
ok 65 - only one (build_requires): found 'Bogus::Complex' in report
ok 66 - only one (build_requires): 'Bogus::Complex' flag correct
ok 67 - only one (build_requires): 'Bogus::Complex' needed version correct
ok 68 - only one (build_requires): 'Bogus::Complex' installed version correct
ok 69 - only one (build_requires): found 'Bogus::Conflict' in report
ok 70 - only one (build_requires): 'Bogus::Conflict' flag correct
ok 71 - only one (build_requires): 'Bogus::Conflict' needed version correct
ok 72 - only one (build_requires): 'Bogus::Conflict' installed version correct
ok 73 - only one (build_requires): found 'Bogus::Found' in report
ok 74 - only one (build_requires): 'Bogus::Found' flag correct
ok 75 - only one (build_requires): 'Bogus::Found' needed version correct
ok 76 - only one (build_requires): 'Bogus::Found' installed version correct
ok 77 - only one (build_requires): found 'Bogus::GT' in report
ok 78 - only one (build_requires): 'Bogus::GT' flag correct
ok 79 - only one (build_requires): 'Bogus::GT' needed version correct
ok 80 - only one (build_requires): 'Bogus::GT' installed version correct
ok 81 - only one (build_requires): found 'Bogus::GTE' in report
ok 82 - only one (build_requires): 'Bogus::GTE' flag correct
ok 83 - only one (build_requires): 'Bogus::GTE' needed version correct
ok 84 - only one (build_requires): 'Bogus::GTE' installed version correct
ok 85 - only one (build_requires): found 'Bogus::LT' in report
ok 86 - only one (build_requires): 'Bogus::LT' flag correct
ok 87 - only one (build_requires): 'Bogus::LT' needed version correct
ok 88 - only one (build_requires): 'Bogus::LT' installed version correct
ok 89 - only one (build_requires): found 'Bogus::LTE' in report
ok 90 - only one (build_requires): 'Bogus::LTE' flag correct
ok 91 - only one (build_requires): 'Bogus::LTE' needed version correct
ok 92 - only one (build_requires): 'Bogus::LTE' installed version correct
ok 93 - only one (build_requires): found 'Bogus::NotFound' in report
ok 94 - only one (build_requires): 'Bogus::NotFound' flag correct
ok 95 - only one (build_requires): 'Bogus::NotFound' needed version correct
ok 96 - only one (build_requires): 'Bogus::NotFound' installed version correct
ok 97 - only one (build_requires): found 'Bogus::NoVersion' in report
ok 98 - only one (build_requires): 'Bogus::NoVersion' flag correct
ok 99 - only one (build_requires): 'Bogus::NoVersion' needed version correct
ok 100 - only one (build_requires): 'Bogus::NoVersion' installed version correct
ok 101 - only one (build_requires): found 'Bogus::Shadow' in report
ok 102 - only one (build_requires): 'Bogus::Shadow' flag correct
ok 103 - only one (build_requires): 'Bogus::Shadow' needed version correct
ok 104 - only one (build_requires): 'Bogus::Shadow' installed version correct
ok 105 - only one (build_requires): found 'Bogus::TooOld' in report
ok 106 - only one (build_requires): 'Bogus::TooOld' flag correct
ok 107 - only one (build_requires): 'Bogus::TooOld' needed version correct
ok 108 - only one (build_requires): 'Bogus::TooOld' installed version correct
ok 109 - only one (build_requires): found 'perl' in report
ok 110 - only one (build_requires): 'perl' flag correct
ok 111 - only one (build_requires): 'perl' needed version correct
ok 112 - only one (build_requires): 'perl' installed version correct
ok 113 - both types: 'requires' header
ok 114 - both types (requires): found 'Bogus::Broken' in report
ok 115 - both types (requires): 'Bogus::Broken' flag correct
ok 116 - both types (requires): 'Bogus::Broken' needed version correct
ok 117 - both types (requires): 'Bogus::Broken' installed version correct
ok 118 - both types (requires): found 'Bogus::Complex' in report
ok 119 - both types (requires): 'Bogus::Complex' flag correct
ok 120 - both types (requires): 'Bogus::Complex' needed version correct
ok 121 - both types (requires): 'Bogus::Complex' installed version correct
ok 122 - both types (requires): found 'Bogus::Conflict' in report
ok 123 - both types (requires): 'Bogus::Conflict' flag correct
ok 124 - both types (requires): 'Bogus::Conflict' needed version correct
ok 125 - both types (requires): 'Bogus::Conflict' installed version correct
ok 126 - both types (requires): found 'Bogus::Found' in report
ok 127 - both types (requires): 'Bogus::Found' flag correct
ok 128 - both types (requires): 'Bogus::Found' needed version correct
ok 129 - both types (requires): 'Bogus::Found' installed version correct
ok 130 - both types (requires): found 'Bogus::GT' in report
ok 131 - both types (requires): 'Bogus::GT' flag correct
ok 132 - both types (requires): 'Bogus::GT' needed version correct
ok 133 - both types (requires): 'Bogus::GT' installed version correct
ok 134 - both types (requires): found 'Bogus::GTE' in report
ok 135 - both types (requires): 'Bogus::GTE' flag correct
ok 136 - both types (requires): 'Bogus::GTE' needed version correct
ok 137 - both types (requires): 'Bogus::GTE' installed version correct
ok 138 - both types (requires): found 'Bogus::LT' in report
ok 139 - both types (requires): 'Bogus::LT' flag correct
ok 140 - both types (requires): 'Bogus::LT' needed version correct
ok 141 - both types (requires): 'Bogus::LT' installed version correct
ok 142 - both types (requires): found 'Bogus::LTE' in report
ok 143 - both types (requires): 'Bogus::LTE' flag correct
ok 144 - both types (requires): 'Bogus::LTE' needed version correct
ok 145 - both types (requires): 'Bogus::LTE' installed version correct
ok 146 - both types (requires): found 'Bogus::NotFound' in report
ok 147 - both types (requires): 'Bogus::NotFound' flag correct
ok 148 - both types (requires): 'Bogus::NotFound' needed version correct
ok 149 - both types (requires): 'Bogus::NotFound' installed version correct
ok 150 - both types (requires): found 'Bogus::NoVersion' in report
ok 151 - both types (requires): 'Bogus::NoVersion' flag correct
ok 152 - both types (requires): 'Bogus::NoVersion' needed version correct
ok 153 - both types (requires): 'Bogus::NoVersion' installed version correct
ok 154 - both types (requires): found 'Bogus::Shadow' in report
ok 155 - both types (requires): 'Bogus::Shadow' flag correct
ok 156 - both types (requires): 'Bogus::Shadow' needed version correct
ok 157 - both types (requires): 'Bogus::Shadow' installed version correct
ok 158 - both types (requires): found 'Bogus::TooOld' in report
ok 159 - both types (requires): 'Bogus::TooOld' flag correct
ok 160 - both types (requires): 'Bogus::TooOld' needed version correct
ok 161 - both types (requires): 'Bogus::TooOld' installed version correct
ok 162 - both types (requires): found 'perl' in report
ok 163 - both types (requires): 'perl' flag correct
ok 164 - both types (requires): 'perl' needed version correct
ok 165 - both types (requires): 'perl' installed version correct
ok 166 - both types: 'build_requires' header
ok 167 - both types (build_requires): found 'Bogus::Broken' in report
ok 168 - both types (build_requires): 'Bogus::Broken' flag correct
ok 169 - both types (build_requires): 'Bogus::Broken' needed version correct
ok 170 - both types (build_requires): 'Bogus::Broken' installed version correct
ok 171 - both types (build_requires): found 'Bogus::Complex' in report
ok 172 - both types (build_requires): 'Bogus::Complex' flag correct
ok 173 - both types (build_requires): 'Bogus::Complex' needed version correct
ok 174 - both types (build_requires): 'Bogus::Complex' installed version correct
ok 175 - both types (build_requires): found 'Bogus::Conflict' in report
ok 176 - both types (build_requires): 'Bogus::Conflict' flag correct
ok 177 - both types (build_requires): 'Bogus::Conflict' needed version correct
ok 178 - both types (build_requires): 'Bogus::Conflict' installed version correct
ok 179 - both types (build_requires): found 'Bogus::Found' in report
ok 180 - both types (build_requires): 'Bogus::Found' flag correct
ok 181 - both types (build_requires): 'Bogus::Found' needed version correct
ok 182 - both types (build_requires): 'Bogus::Found' installed version correct
ok 183 - both types (build_requires): found 'Bogus::GT' in report
ok 184 - both types (build_requires): 'Bogus::GT' flag correct
ok 185 - both types (build_requires): 'Bogus::GT' needed version correct
ok 186 - both types (build_requires): 'Bogus::GT' installed version correct
ok 187 - both types (build_requires): found 'Bogus::GTE' in report
ok 188 - both types (build_requires): 'Bogus::GTE' flag correct
ok 189 - both types (build_requires): 'Bogus::GTE' needed version correct
ok 190 - both types (build_requires): 'Bogus::GTE' installed version correct
ok 191 - both types (build_requires): found 'Bogus::LT' in report
ok 192 - both types (build_requires): 'Bogus::LT' flag correct
ok 193 - both types (build_requires): 'Bogus::LT' needed version correct
ok 194 - both types (build_requires): 'Bogus::LT' installed version correct
ok 195 - both types (build_requires): found 'Bogus::LTE' in report
ok 196 - both types (build_requires): 'Bogus::LTE' flag correct
ok 197 - both types (build_requires): 'Bogus::LTE' needed version correct
ok 198 - both types (build_requires): 'Bogus::LTE' installed version correct
ok 199 - both types (build_requires): found 'Bogus::NotFound' in report
ok 200 - both types (build_requires): 'Bogus::NotFound' flag correct
ok 201 - both types (build_requires): 'Bogus::NotFound' needed version correct
ok 202 - both types (build_requires): 'Bogus::NotFound' installed version correct
ok 203 - both types (build_requires): found 'Bogus::NoVersion' in report
ok 204 - both types (build_requires): 'Bogus::NoVersion' flag correct
ok 205 - both types (build_requires): 'Bogus::NoVersion' needed version correct
ok 206 - both types (build_requires): 'Bogus::NoVersion' installed version correct
ok 207 - both types (build_requires): found 'Bogus::Shadow' in report
ok 208 - both types (build_requires): 'Bogus::Shadow' flag correct
ok 209 - both types (build_requires): 'Bogus::Shadow' needed version correct
ok 210 - both types (build_requires): 'Bogus::Shadow' installed version correct
ok 211 - both types (build_requires): found 'Bogus::TooOld' in report
ok 212 - both types (build_requires): 'Bogus::TooOld' flag correct
ok 213 - both types (build_requires): 'Bogus::TooOld' needed version correct
ok 214 - both types (build_requires): 'Bogus::TooOld' installed version correct
ok 215 - both types (build_requires): found 'perl' in report
ok 216 - both types (build_requires): 'perl' flag correct
ok 217 - both types (build_requires): 'perl' needed version correct
ok 218 - both types (build_requires): 'perl' installed version correct
ok
t/11_env_config.t .............. 
1..33
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - found $ENV{LANG}
ok 7 - value of $ENV{LANG} is correct
ok 8 - found $ENV{LANGUAGE}
ok 9 - value of $ENV{LANGUAGE} is correct
ok 10 - found $ENV{LC_COLLATE}
ok 11 - value of $ENV{LC_COLLATE} is correct
ok 12 - found $ENV{LC_CTYPE}
ok 13 - value of $ENV{LC_CTYPE} is correct
ok 14 - found $ENV{LD_LIBRARY_PATH}
ok 15 - value of $ENV{LD_LIBRARY_PATH} is correct
ok 16 - found $ENV{PATH}
ok 17 - value of $ENV{PATH} is correct
ok 18 - found $ENV{PERL5LIB}
ok 19 - value of $ENV{PERL5LIB} is correct
ok 20 - found $ENV{PERL_DL_NONLAZY}
ok 21 - value of $ENV{PERL_DL_NONLAZY} is correct
ok 22 - found $ENV{PERL_USE_UNSAFE_INC}
ok 23 - value of $ENV{PERL_USE_UNSAFE_INC} is correct
ok 24 - found $ENV{SHELL}
ok 25 - value of $ENV{SHELL} is correct
ok 26 - found special variable $EGID
ok 27 - value of $EGID is correct
ok 28 - found special variable $GID
ok 29 - value of $GID is correct
ok 30 - found special variable $UID/$EUID
ok 31 - value of $UID/$EUID is correct
ok 32 - found special variable $^X
ok 33 - value of $^X is correct
ok
t/12_toolchain_versions.t ...... 
1..33
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - found toolchain module entry for 'CPAN'
ok 7 - version of 'CPAN' is correct
ok 8 - found toolchain module entry for 'Cwd'
ok 9 - version of 'Cwd' is correct
ok 10 - found toolchain module entry for 'ExtUtils::CBuilder'
ok 11 - version of 'ExtUtils::CBuilder' is correct
ok 12 - found toolchain module entry for 'ExtUtils::Command'
ok 13 - version of 'ExtUtils::Command' is correct
ok 14 - found toolchain module entry for 'ExtUtils::Install'
ok 15 - version of 'ExtUtils::Install' is correct
ok 16 - found toolchain module entry for 'ExtUtils::MakeMaker'
ok 17 - version of 'ExtUtils::MakeMaker' is correct
ok 18 - found toolchain module entry for 'ExtUtils::Manifest'
ok 19 - version of 'ExtUtils::Manifest' is correct
ok 20 - found toolchain module entry for 'ExtUtils::ParseXS'
ok 21 - version of 'ExtUtils::ParseXS' is correct
ok 22 - found toolchain module entry for 'File::Spec'
ok 23 - version of 'File::Spec' is correct
ok 24 - found toolchain module entry for 'Module::Build'
ok 25 - version of 'Module::Build' is correct
ok 26 - found toolchain module entry for 'Module::Signature'
ok 27 - version of 'Module::Signature' is correct
ok 28 - found toolchain module entry for 'Test::Harness'
ok 29 - version of 'Test::Harness' is correct
ok 30 - found toolchain module entry for 'Test::More'
ok 31 - version of 'Test::More' is correct
ok 32 - found toolchain module entry for 'version'
ok 33 - version of 'version' is correct
ok
# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
t/13_record_command.t .......... 
1..33
ok 1 - require CPAN::Reporter;
ok 2 - Exit with 0: No timeout requested
ok 3 - Exit with 0: captured stdout
ok 4 - Exit with 0: output as expected
ok 5 - Exit with 0: exit code correct
ok 6 - Exit with 1: No timeout requested
ok 7 - Exit with 1: captured stdout
ok 8 - Exit with 1: output as expected
ok 9 - Exit with 1: exit code correct
ok 10 - Exit with 2: No timeout requested
ok 11 - Exit with 2: captured stdout
ok 12 - Exit with 2: output as expected
ok 13 - Exit with 2: exit code correct
ok 14 - Exit with args in shell quotes: No timeout requested
ok 15 - Exit with args in shell quotes: captured stdout
ok 16 - Exit with args in shell quotes: output as expected
ok 17 - Exit with args in shell quotes: exit code correct
ok 18 - Exit with args and pipe: No timeout requested
ok 19 - Exit with args and pipe: captured stdout
ok 20 - Exit with args and pipe: output as expected
ok 21 - Exit with args and pipe: exit code correct
ok 22 - Timeout kills process: timeout stopped process
ok 23 - Timeout kills process: captured stdout
ok 24 - Timeout kills process: output as expected
ok 25 - Timeout kills process: exit code correct
ok 26 - Timeout not reached: timeout didn't stop process
ok 27 - Timeout not reached: captured stdout
ok 28 - Timeout not reached: output as expected
ok 29 - Timeout not reached: exit code correct
ok 30 - Timeout not reached (quoted args): timeout didn't stop process
ok 31 - Timeout not reached (quoted args): captured stdout
ok 32 - Timeout not reached (quoted args): output as expected
ok 33 - Timeout not reached (quoted args): exit code correct
ok
# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
t/14_command_timeout.t ......... 
1..65
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - regular < global < delay: regular timeout
ok 7 - regular < global < delay: captured stdout
ok 8 - regular < global < delay: output as expected
ok 9 - regular < global < delay: exit code correct
ok 10 - home directory mocked
ok 11 - config directory created
ok 12 - created mock metabase file for testing
ok 13 - created temp config file
ok 14 - regular < delay < global: regular timeout
ok 15 - regular < delay < global: captured stdout
ok 16 - regular < delay < global: output as expected
ok 17 - regular < delay < global: exit code correct
ok 18 - home directory mocked
ok 19 - config directory created
ok 20 - created mock metabase file for testing
ok 21 - created temp config file
ok 22 - global < regular < delay: regular timeout
ok 23 - global < regular < delay: captured stdout
ok 24 - global < regular < delay: output as expected
ok 25 - global < regular < delay: exit code correct
ok 26 - home directory mocked
ok 27 - config directory created
ok 28 - created mock metabase file for testing
ok 29 - created temp config file
ok 30 - global < delay < regular: no timeout
ok 31 - global < delay < regular: captured stdout
ok 32 - global < delay < regular: output as expected
ok 33 - global < delay < regular: exit code correct
ok 34 - home directory mocked
ok 35 - config directory created
ok 36 - created mock metabase file for testing
ok 37 - created temp config file
ok 38 - delay < regular < global: no timeout
ok 39 - delay < regular < global: captured stdout
ok 40 - delay < regular < global: output as expected
ok 41 - delay < regular < global: exit code correct
ok 42 - home directory mocked
ok 43 - config directory created
ok 44 - created mock metabase file for testing
ok 45 - created temp config file
ok 46 - delay < global < regular: no timeout
ok 47 - delay < global < regular: captured stdout
ok 48 - delay < global < regular: output as expected
ok 49 - delay < global < regular: exit code correct
ok 50 - home directory mocked
ok 51 - config directory created
ok 52 - created mock metabase file for testing
ok 53 - created temp config file
ok 54 - global < delay: command timeout
ok 55 - global < delay: captured stdout
ok 56 - global < delay: output as expected
ok 57 - global < delay: exit code correct
ok 58 - home directory mocked
ok 59 - config directory created
ok 60 - created mock metabase file for testing
ok 61 - created temp config file
ok 62 - delay < global: no timeout
ok 63 - delay < global: captured stdout
ok 64 - delay < global: output as expected
ok 65 - delay < global: exit code correct
ok
t/15_option_validation.t ....... 
1..9
ok 1 - require CPAN::Reporter::Config;
ok 2 - skipfile (exists)
ok 3 - skipfile (missing)
ok 4 - command_timeout (positive)
ok 5 - command_timeout (negative)
ok 6 - command_timeout (zero)
ok 7 - command_timeout (empty)
ok 8 - command_timeout (undef)
ok 9 - command_timeout (alpha)
ok
t/20_report_output.t ........... 
1..141
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-Pass to temp directory /tmp/lyaJYrXdkN
ok 7 - t-Pass: comment.txt does not exist
ok 8 - t-Pass: comment.txt removed if needed
ok 9 - t-Pass: report ran without error
ok 10 - t-Pass: found 'pass' grade paragraph
ok 11 - t-Pass: correct intro paragraph
ok 12 - t-Pass: correct default comment
ok 13 - t-Pass: comment does not include smoke testing notice
ok 14 - t-Pass: comment does include 'none provided'
ok 15 - t-Pass: found prereq report
ok 16 - t-Pass: found environment variables
ok 17 - t-Pass: found special variables
ok 18 - t-Pass: found toolchain versions found
ok 19 - t-Pass: located test output in report
ok 20 - t-Pass: no truncation message seen
ok 21 - t-Pass: test_output less than or equal to maximum length
ok 22 - t-Pass: found output matches expected output
ok 23 - Copying t-Fail to temp directory /tmp/3PU9WjcXNJ
ok 24 - t-Fail: comment.txt does not exist
ok 25 - t-Fail: comment.txt removed if needed
ok 26 - t-Fail: report ran without error
ok 27 - t-Fail: found 'fail' grade paragraph
ok 28 - t-Fail: correct intro paragraph
ok 29 - t-Fail: correct default comment
ok 30 - t-Fail: comment does not include smoke testing notice
ok 31 - t-Fail: comment does include 'none provided'
ok 32 - t-Fail: found prereq report
ok 33 - t-Fail: found environment variables
ok 34 - t-Fail: found special variables
ok 35 - t-Fail: found toolchain versions found
ok 36 - t-Fail: located test output in report
ok 37 - t-Fail: no truncation message seen
ok 38 - t-Fail: test_output less than or equal to maximum length
ok 39 - t-Fail: found output matches expected output
ok 40 - Copying NoTestFiles to temp directory /tmp/cUe9TSAWJp
ok 41 - NoTestFiles: comment.txt does not exist
ok 42 - NoTestFiles: comment.txt removed if needed
ok 43 - NoTestFiles: report ran without error
ok 44 - NoTestFiles: found 'unknown' grade paragraph
ok 45 - NoTestFiles: correct intro paragraph
ok 46 - NoTestFiles: correct default comment
ok 47 - NoTestFiles: comment does not include smoke testing notice
ok 48 - NoTestFiles: comment does include 'none provided'
ok 49 - NoTestFiles: found prereq report
ok 50 - NoTestFiles: found environment variables
ok 51 - NoTestFiles: found special variables
ok 52 - NoTestFiles: found toolchain versions found
ok 53 - NoTestFiles: located test output in report
ok 54 - NoTestFiles: no truncation message seen
ok 55 - NoTestFiles: test_output less than or equal to maximum length
ok 56 - NoTestFiles: found output matches expected output
ok 57 - Copying t-NoSupport to temp directory /tmp/IlcVQYEEEh
ok 58 - t-NoSupport: comment.txt does not exist
ok 59 - t-NoSupport: comment.txt removed if needed
ok 60 - t-NoSupport: report ran without error
ok 61 - t-NoSupport: found 'na' grade paragraph
ok 62 - t-NoSupport: correct intro paragraph
ok 63 - t-NoSupport: correct default comment
ok 64 - t-NoSupport: comment does not include smoke testing notice
ok 65 - t-NoSupport: comment does include 'none provided'
ok 66 - t-NoSupport: found prereq report
ok 67 - t-NoSupport: found environment variables
ok 68 - t-NoSupport: found special variables
ok 69 - t-NoSupport: found toolchain versions found
ok 70 - t-NoSupport: located test output in report
ok 71 - t-NoSupport: no truncation message seen
ok 72 - t-NoSupport: test_output less than or equal to maximum length
ok 73 - t-NoSupport: found output matches expected output
ok 74 - Copying t-Fail-LongOutput to temp directory /tmp/QA4aLtE23R
ok 75 - t-Fail-LongOutput: comment.txt does not exist
ok 76 - t-Fail-LongOutput: comment.txt removed if needed
ok 77 - t-Fail-LongOutput: report ran without error
ok 78 - t-Fail-LongOutput: found 'fail' grade paragraph
ok 79 - t-Fail-LongOutput: correct intro paragraph
ok 80 - t-Fail-LongOutput: correct default comment
ok 81 - t-Fail-LongOutput: comment does not include smoke testing notice
ok 82 - t-Fail-LongOutput: comment does include 'none provided'
ok 83 - t-Fail-LongOutput: found prereq report
ok 84 - t-Fail-LongOutput: found environment variables
ok 85 - t-Fail-LongOutput: found special variables
ok 86 - t-Fail-LongOutput: found toolchain versions found
ok 87 - t-Fail-LongOutput: located test output in report
ok 88 - t-Fail-LongOutput: no truncation message seen
ok 89 - t-Fail-LongOutput: test_output less than or equal to maximum length
ok 90 - t-Fail-LongOutput: found output matches expected output
ok 91 - Copying t-Pass to temp directory /tmp/LgBTL_PAzV
ok 92 - t-Pass: comment.txt does not exist
ok 93 - t-Pass: comment.txt removed if needed
ok 94 - t-Pass: report ran without error
ok 95 - t-Pass: found 'pass' grade paragraph
ok 96 - t-Pass: correct intro paragraph
ok 97 - t-Pass: correct default comment
ok 98 - t-Pass: comment includes smoke testing notice
ok 99 - t-Pass: comment does not include 'none provided'
ok 100 - t-Pass: found prereq report
ok 101 - t-Pass: found environment variables
ok 102 - t-Pass: found special variables
ok 103 - t-Pass: found toolchain versions found
ok 104 - t-Pass: located test output in report
ok 105 - t-Pass: no truncation message seen
ok 106 - t-Pass: test_output less than or equal to maximum length
ok 107 - t-Pass: found output matches expected output
ok 108 - Copying t-Pass to temp directory /tmp/Xmi3LYoRbv
ok 109 - t-Pass: created comment.txt file
ok 110 - t-Pass: comment.txt removed if needed
ok 111 - t-Pass: report ran without error
ok 112 - t-Pass: found 'pass' grade paragraph
ok 113 - t-Pass: correct intro paragraph
ok 114 - t-Pass: correct default comment
ok 115 - t-Pass: comment does not include smoke testing notice
ok 116 - t-Pass: comment does not include 'none provided'
ok 117 - t-Pass: found prereq report
ok 118 - t-Pass: found environment variables
ok 119 - t-Pass: found special variables
ok 120 - t-Pass: found toolchain versions found
ok 121 - t-Pass: located test output in report
ok 122 - t-Pass: no truncation message seen
ok 123 - t-Pass: test_output less than or equal to maximum length
ok 124 - t-Pass: found output matches expected output
ok 125 - Copying t-Pass to temp directory /tmp/4V8Wn7Yq57
ok 126 - t-Pass: created comment.txt file
ok 127 - t-Pass: comment.txt removed if needed
ok 128 - t-Pass: report ran without error
ok 129 - t-Pass: found 'pass' grade paragraph
ok 130 - t-Pass: correct intro paragraph
ok 131 - t-Pass: correct default comment
ok 132 - t-Pass: comment includes smoke testing notice
ok 133 - t-Pass: comment does not include 'none provided'
ok 134 - t-Pass: found prereq report
ok 135 - t-Pass: found environment variables
ok 136 - t-Pass: found special variables
ok 137 - t-Pass: found toolchain versions found
ok 138 - t-Pass: located test output in report
ok 139 - t-Pass: no truncation message seen
ok 140 - t-Pass: test_output less than or equal to maximum length
ok 141 - t-Pass: found output matches expected output
ok
t/30_PL_report.t ............... 
1..75
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-Pass to temp directory /tmp/hk5AJ07o5S
ok 7 - t-Pass: grade_PL() for Makefile.PL returned 1
ok 8 - t-Pass: 'Makefile.PL' grade reported as 'pass'
ok 9 - t-Pass: report notification correct
ok 10 - t-Pass: results not sent
ok 11 - Copying t-Pass to temp directory /tmp/mIl7ZdcW3x
ok 12 - t-Pass: grade_PL() for Build.PL returned 1
ok 13 - t-Pass: 'Build.PL' grade reported as 'pass'
ok 14 - t-Pass: report notification correct
ok 15 - t-Pass: results not sent
ok 16 - Copying PL-Fail to temp directory /tmp/V3f8XNDehu
ok 17 - PL-Fail: grade_PL() for Makefile.PL returned 0
ok 18 - PL-Fail: 'Makefile.PL' grade reported as 'unknown'
ok 19 - PL-Fail: report notification correct
ok 20 - PL-Fail: report was mock sent
ok 21 - Copying PL-Fail to temp directory /tmp/MH97cP1ecI
ok 22 - PL-Fail: grade_PL() for Build.PL returned 0
ok 23 - PL-Fail: 'Build.PL' grade reported as 'unknown'
ok 24 - PL-Fail: report notification correct
ok 25 - PL-Fail: report was mock sent
ok 26 - Copying PL-RequirePerl to temp directory /tmp/7HDMpnrPYp
ok 27 - PL-RequirePerl: grade_PL() for Makefile.PL returned 0
ok 28 - PL-RequirePerl: 'Makefile.PL' grade reported as 'na'
ok 29 - PL-RequirePerl: report notification correct
ok 30 - PL-RequirePerl: report was mock sent
ok 31 - Copying PL-RequirePerl to temp directory /tmp/fTKHcwxrfc
ok 32 - PL-RequirePerl: grade_PL() for Build.PL returned 0
ok 33 - PL-RequirePerl: 'Build.PL' grade reported as 'na'
ok 34 - PL-RequirePerl: report notification correct
ok 35 - PL-RequirePerl: report was mock sent
ok 36 - Copying PL-MIRequirePerl to temp directory /tmp/m38rEefH5d
ok 37 - PL-MIRequirePerl: grade_PL() for Makefile.PL returned 0
ok 38 - PL-MIRequirePerl: 'Makefile.PL' grade reported as 'na'
ok 39 - PL-MIRequirePerl: report notification correct
ok 40 - PL-MIRequirePerl: report was mock sent
ok 41 - Copying PL-MIRequirePerl to temp directory /tmp/cajMXky97g
ok 42 - PL-MIRequirePerl: grade_PL() for Build.PL returned 0
ok 43 - PL-MIRequirePerl: 'Build.PL' grade reported as 'na'
ok 44 - PL-MIRequirePerl: report notification correct
ok 45 - PL-MIRequirePerl: report was mock sent
ok 46 - Copying PL-OSUnsupported to temp directory /tmp/VuyuW9T8YY
ok 47 - PL-OSUnsupported: grade_PL() for Makefile.PL returned 0
ok 48 - PL-OSUnsupported: 'Makefile.PL' grade reported as 'na'
ok 49 - PL-OSUnsupported: report notification correct
ok 50 - PL-OSUnsupported: report was mock sent
ok 51 - Copying PL-OSUnsupported to temp directory /tmp/mkJ7blPCv3
ok 52 - PL-OSUnsupported: grade_PL() for Build.PL returned 0
ok 53 - PL-OSUnsupported: 'Build.PL' grade reported as 'na'
ok 54 - PL-OSUnsupported: report notification correct
ok 55 - PL-OSUnsupported: report was mock sent
ok 56 - Copying PL-warn-OSUnsupported to temp directory /tmp/C4fRfRtfLR
ok 57 - PL-warn-OSUnsupported: grade_PL() for Makefile.PL returned 0
ok 58 - PL-warn-OSUnsupported: 'Makefile.PL' grade reported as 'na'
ok 59 - PL-warn-OSUnsupported: report notification correct
ok 60 - PL-warn-OSUnsupported: report was mock sent
ok 61 - Copying PL-warn-OSUnsupported to temp directory /tmp/zn0yP_aE0w
ok 62 - PL-warn-OSUnsupported: grade_PL() for Build.PL returned 0
ok 63 - PL-warn-OSUnsupported: 'Build.PL' grade reported as 'na'
ok 64 - PL-warn-OSUnsupported: report notification correct
ok 65 - PL-warn-OSUnsupported: report was mock sent
ok 66 - Copying t-PrereqPerl-NOK-our to temp directory /tmp/S4E6xlnU1I
ok 67 - t-PrereqPerl-NOK-our: grade_PL() for Makefile.PL returned 1
ok 68 - t-PrereqPerl-NOK-our: 'Makefile.PL' grade reported as 'pass'
ok 69 - t-PrereqPerl-NOK-our: report notification correct
ok 70 - t-PrereqPerl-NOK-our: results not sent
ok 71 - Copying t-PrereqPerl-NOK-our to temp directory /tmp/OlHkKyz0QE
ok 72 - t-PrereqPerl-NOK-our: grade_PL() for Build.PL returned 1
ok 73 - t-PrereqPerl-NOK-our: 'Build.PL' grade reported as 'pass'
ok 74 - t-PrereqPerl-NOK-our: report notification correct
ok 75 - t-PrereqPerl-NOK-our: results not sent
ok
t/31_PL_report_discard.t ....... 
1..65
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying PL-PrereqMiss to temp directory /tmp/XI0JXrfNvw
ok 7 - PL-PrereqMiss: grade_PL() for Makefile.PL returned 0
ok 8 - PL-PrereqMiss: 'Makefile.PL' saw test results not valid message
ok 9 - PL-PrereqMiss: discard message correct
ok 10 - PL-PrereqMiss: test results discarded
ok 11 - Copying PL-PrereqMiss to temp directory /tmp/P9kHzpB2dI
ok 12 - PL-PrereqMiss: grade_PL() for Build.PL returned 0
ok 13 - PL-PrereqMiss: 'Build.PL' saw test results not valid message
ok 14 - PL-PrereqMiss: discard message correct
ok 15 - PL-PrereqMiss: test results discarded
ok 16 - Copying PL-PrereqMissOK to temp directory /tmp/jV6QQTsrSJ
ok 17 - PL-PrereqMissOK: grade_PL() for Makefile.PL returned 1
ok 18 - PL-PrereqMissOK: 'Makefile.PL' grade reported as 'pass'
ok 19 - PL-PrereqMissOK: report notification correct
ok 20 - PL-PrereqMissOK: results not sent
ok 21 - Copying PL-PrereqMissOK to temp directory /tmp/ktSNtKDaUJ
ok 22 - PL-PrereqMissOK: grade_PL() for Build.PL returned 1
ok 23 - PL-PrereqMissOK: 'Build.PL' grade reported as 'pass'
ok 24 - PL-PrereqMissOK: report notification correct
ok 25 - PL-PrereqMissOK: results not sent
ok 26 - Copying PL-PrereqFail to temp directory /tmp/D_s8Pem3Y1
ok 27 - PL-PrereqFail: grade_PL() for Makefile.PL returned 0
ok 28 - PL-PrereqFail: 'Makefile.PL' saw test results not valid message
ok 29 - PL-PrereqFail: discard message correct
ok 30 - PL-PrereqFail: test results discarded
ok 31 - Copying PL-PrereqFail to temp directory /tmp/NOt6OfZNeN
ok 32 - PL-PrereqFail: grade_PL() for Build.PL returned 0
ok 33 - PL-PrereqFail: 'Build.PL' saw test results not valid message
ok 34 - PL-PrereqFail: discard message correct
ok 35 - PL-PrereqFail: test results discarded
ok 36 - Copying PL-NoMakefileOrBuild to temp directory /tmp/aHeUEu_arF
ok 37 - PL-NoMakefileOrBuild: grade_PL() for Makefile.PL returned 0
ok 38 - PL-NoMakefileOrBuild: 'Makefile.PL' saw test results not valid message
ok 39 - PL-NoMakefileOrBuild: discard message correct
ok 40 - PL-NoMakefileOrBuild: test results discarded
ok 41 - Copying PL-NoMakefileOrBuild to temp directory /tmp/kCq5PiDSno
ok 42 - PL-NoMakefileOrBuild: grade_PL() for Build.PL returned 0
ok 43 - PL-NoMakefileOrBuild: 'Build.PL' saw test results not valid message
ok 44 - PL-NoMakefileOrBuild: discard message correct
ok 45 - PL-NoMakefileOrBuild: test results discarded
ok 46 - Copying PL-ConfigRequires to temp directory /tmp/k7uTrj7LtD
ok 47 - PL-ConfigRequires: grade_PL() for Makefile.PL returned 0
ok 48 - PL-ConfigRequires: 'Makefile.PL' saw test results not valid message
ok 49 - PL-ConfigRequires: discard message correct
ok 50 - PL-ConfigRequires: test results discarded
ok 51 - Copying PL-ConfigRequires to temp directory /tmp/vfgC7SYcSN
ok 52 - PL-ConfigRequires: grade_PL() for Build.PL returned 0
ok 53 - PL-ConfigRequires: 'Build.PL' saw test results not valid message
ok 54 - PL-ConfigRequires: discard message correct
ok 55 - PL-ConfigRequires: test results discarded
ok 56 - Copying PL-ConfigRequiresError to temp directory /tmp/QKMIWoBnLh
ok 57 - PL-ConfigRequiresError: grade_PL() for Makefile.PL returned 0
ok 58 - PL-ConfigRequiresError: 'Makefile.PL' grade reported as 'unknown'
ok 59 - PL-ConfigRequiresError: report notification correct
ok 60 - PL-ConfigRequiresError: report was mock sent
ok 61 - Copying PL-ConfigRequiresError to temp directory /tmp/nlwtAth5dq
ok 62 - PL-ConfigRequiresError: grade_PL() for Build.PL returned 0
ok 63 - PL-ConfigRequiresError: 'Build.PL' grade reported as 'unknown'
ok 64 - PL-ConfigRequiresError: report notification correct
ok 65 - PL-ConfigRequiresError: report was mock sent
ok
t/40_make_report.t ............. 
1..41
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-Pass to temp directory /tmp/a2Mlwc8Pxm
ok 7 - t-Pass: Makefile.PL successful
ok 8 - t-Pass: grade_make() for make returned 1
ok 9 - t-Pass: 'make' grade reported as 'pass'
ok 10 - t-Pass: report notification correct
ok 11 - t-Pass: results not sent
ok 12 - Copying t-Pass to temp directory /tmp/0nhXJrbC9Y
ok 13 - t-Pass: Build.PL successful
ok 14 - t-Pass: grade_make() for Build returned 1
ok 15 - t-Pass: 'Build' grade reported as 'pass'
ok 16 - t-Pass: report notification correct
ok 17 - t-Pass: results not sent
ok 18 - Copying make-Fail to temp directory /tmp/mR5TxJzMg2
ok 19 - make-Fail: Makefile.PL successful
ok 20 - make-Fail: grade_make() for make returned 0
ok 21 - make-Fail: 'make' grade reported as 'unknown'
ok 22 - make-Fail: report notification correct
ok 23 - make-Fail: report was mock sent
ok 24 - Copying make-Fail to temp directory /tmp/ehgyq0Zu3G
ok 25 - make-Fail: Build.PL successful
ok 26 - make-Fail: grade_make() for Build returned 0
ok 27 - make-Fail: 'Build' grade reported as 'unknown'
ok 28 - make-Fail: report notification correct
ok 29 - make-Fail: report was mock sent
ok 30 - Copying make-RequirePerl to temp directory /tmp/vIuRN7Y_Mt
ok 31 - make-RequirePerl: Makefile.PL successful
ok 32 - make-RequirePerl: grade_make() for make returned 0
ok 33 - make-RequirePerl: 'make' grade reported as 'na'
ok 34 - make-RequirePerl: report notification correct
ok 35 - make-RequirePerl: report was mock sent
ok 36 - Copying make-RequirePerl to temp directory /tmp/ODoZ3CuTzG
ok 37 - make-RequirePerl: Build.PL successful
ok 38 - make-RequirePerl: grade_make() for Build returned 0
ok 39 - make-RequirePerl: 'Build' grade reported as 'na'
ok 40 - make-RequirePerl: report notification correct
ok 41 - make-RequirePerl: report was mock sent
ok
t/41_make_report_discard.t ..... 
1..29
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying make-PrereqMiss to temp directory /tmp/UFDVm0m3yD
ok 7 - make-PrereqMiss: Makefile.PL successful
ok 8 - make-PrereqMiss: grade_make() for make returned 0
ok 9 - make-PrereqMiss: 'make' prerequisites not satisifed
ok 10 - make-PrereqMiss: discard message correct
ok 11 - make-PrereqMiss: test results discarded
ok 12 - Copying make-PrereqMiss to temp directory /tmp/Bs6QGDBXiI
ok 13 - make-PrereqMiss: Build.PL successful
ok 14 - make-PrereqMiss: grade_make() for Build returned 0
ok 15 - make-PrereqMiss: 'Build' prerequisites not satisifed
ok 16 - make-PrereqMiss: discard message correct
ok 17 - make-PrereqMiss: test results discarded
ok 18 - Copying make-PrereqFail to temp directory /tmp/AWULa204Fz
ok 19 - make-PrereqFail: Makefile.PL successful
ok 20 - make-PrereqFail: grade_make() for make returned 0
ok 21 - make-PrereqFail: 'make' prerequisites not satisifed
ok 22 - make-PrereqFail: discard message correct
ok 23 - make-PrereqFail: test results discarded
ok 24 - Copying make-PrereqFail to temp directory /tmp/BtHffiR6M2
ok 25 - make-PrereqFail: Build.PL successful
ok 26 - make-PrereqFail: grade_make() for Build returned 0
ok 27 - make-PrereqFail: 'Build' prerequisites not satisifed
ok 28 - make-PrereqFail: discard message correct
ok 29 - make-PrereqFail: test results discarded
ok
t/50_test_report_pass.t ........ 
1..103
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-Pass to temp directory /tmp/tjuvq6Zp5W
ok 7 - t-Pass: Makefile.PL successful
ok 8 - t-Pass: 'make test' returned 1
ok 9 - t-Pass: 'make test' grade reported as 'pass'
ok 10 - t-Pass: report notification correct
ok 11 - t-Pass: test report was mock sent
ok 12 - t-Pass: 'make test' grade explanation correct
ok 13 - Copying t-Pass to temp directory /tmp/Zq1YUC6zI3
ok 14 - t-Pass: Build.PL successful
ok 15 - t-Pass: 'perl Build test' returned 1
ok 16 - t-Pass: 'perl Build test' grade reported as 'pass'
ok 17 - t-Pass: report notification correct
ok 18 - t-Pass: test report was mock sent
ok 19 - t-Pass: 'perl Build test' grade explanation correct
ok 20 - Copying test.pl-Pass to temp directory /tmp/IGmZwv6uAi
ok 21 - test.pl-Pass: Makefile.PL successful
ok 22 - test.pl-Pass: 'make test' returned 1
ok 23 - test.pl-Pass: 'make test' grade reported as 'pass'
ok 24 - test.pl-Pass: report notification correct
ok 25 - test.pl-Pass: test report was mock sent
ok 26 - test.pl-Pass: 'make test' grade explanation correct
ok 27 - Copying test.pl-Pass to temp directory /tmp/nApvnQuw4j
ok 28 - test.pl-Pass: Build.PL successful
ok 29 - test.pl-Pass: 'perl Build test' returned 1
ok 30 - test.pl-Pass: 'perl Build test' grade reported as 'pass'
ok 31 - test.pl-Pass: report notification correct
ok 32 - test.pl-Pass: test report was mock sent
ok 33 - test.pl-Pass: 'perl Build test' grade explanation correct
ok 34 - Copying t-test.pl-Pass-Pass to temp directory /tmp/1OayLCtImP
ok 35 - t-test.pl-Pass-Pass: Makefile.PL successful
ok 36 - t-test.pl-Pass-Pass: 'make test' returned 1
ok 37 - t-test.pl-Pass-Pass: 'make test' grade reported as 'pass'
ok 38 - t-test.pl-Pass-Pass: report notification correct
ok 39 - t-test.pl-Pass-Pass: test report was mock sent
ok 40 - t-test.pl-Pass-Pass: 'make test' grade explanation correct
ok 41 - Copying t-test.pl-Pass-Pass to temp directory /tmp/xeOZLkCw06
ok 42 - t-test.pl-Pass-Pass: Build.PL successful
ok 43 - t-test.pl-Pass-Pass: 'perl Build test' returned 1
ok 44 - t-test.pl-Pass-Pass: 'perl Build test' grade reported as 'pass'
ok 45 - t-test.pl-Pass-Pass: report notification correct
ok 46 - t-test.pl-Pass-Pass: test report was mock sent
ok 47 - t-test.pl-Pass-Pass: 'perl Build test' grade explanation correct
ok 48 - Copying t-PrereqPerl-OK to temp directory /tmp/VGZ_bL4D0Q
ok 49 - t-PrereqPerl-OK: Makefile.PL successful
ok 50 - t-PrereqPerl-OK: 'make test' returned 1
ok 51 - t-PrereqPerl-OK: 'make test' grade reported as 'pass'
ok 52 - t-PrereqPerl-OK: report notification correct
ok 53 - t-PrereqPerl-OK: test report was mock sent
ok 54 - t-PrereqPerl-OK: 'make test' grade explanation correct
ok 55 - Copying t-PrereqPerl-OK to temp directory /tmp/YDe8LHT9cS
ok 56 - t-PrereqPerl-OK: Build.PL successful
ok 57 - t-PrereqPerl-OK: 'perl Build test' returned 1
ok 58 - t-PrereqPerl-OK: 'perl Build test' grade reported as 'pass'
ok 59 - t-PrereqPerl-OK: report notification correct
ok 60 - t-PrereqPerl-OK: test report was mock sent
ok 61 - t-PrereqPerl-OK: 'perl Build test' grade explanation correct
ok 62 - Copying test.pl-PrereqPerl-OK to temp directory /tmp/y8B5mcMxGL
ok 63 - test.pl-PrereqPerl-OK: Makefile.PL successful
ok 64 - test.pl-PrereqPerl-OK: 'make test' returned 1
ok 65 - test.pl-PrereqPerl-OK: 'make test' grade reported as 'pass'
ok 66 - test.pl-PrereqPerl-OK: report notification correct
ok 67 - test.pl-PrereqPerl-OK: test report was mock sent
ok 68 - test.pl-PrereqPerl-OK: 'make test' grade explanation correct
ok 69 - Copying test.pl-PrereqPerl-OK to temp directory /tmp/GZWHDrrGJ1
ok 70 - test.pl-PrereqPerl-OK: Build.PL successful
ok 71 - test.pl-PrereqPerl-OK: 'perl Build test' returned 1
ok 72 - test.pl-PrereqPerl-OK: 'perl Build test' grade reported as 'pass'
ok 73 - test.pl-PrereqPerl-OK: report notification correct
ok 74 - test.pl-PrereqPerl-OK: test report was mock sent
ok 75 - test.pl-PrereqPerl-OK: 'perl Build test' grade explanation correct
ok 76 - Copying t-Recurse-Pass to temp directory /tmp/KQXHqRnM1v
ok 77 - t-Recurse-Pass: Makefile.PL successful
ok 78 - t-Recurse-Pass: 'make test' returned 1
ok 79 - t-Recurse-Pass: 'make test' grade reported as 'pass'
ok 80 - t-Recurse-Pass: report notification correct
ok 81 - t-Recurse-Pass: test report was mock sent
ok 82 - t-Recurse-Pass: 'make test' grade explanation correct
ok 83 - Copying t-Recurse-Pass to temp directory /tmp/Yw2C6_EuXS
ok 84 - t-Recurse-Pass: Build.PL successful
ok 85 - t-Recurse-Pass: 'perl Build test' returned 1
ok 86 - t-Recurse-Pass: 'perl Build test' grade reported as 'pass'
ok 87 - t-Recurse-Pass: report notification correct
ok 88 - t-Recurse-Pass: test report was mock sent
ok 89 - t-Recurse-Pass: 'perl Build test' grade explanation correct
ok 90 - Copying custom-NoOutput-OK to temp directory /tmp/Dad6uPBjuZ
ok 91 - custom-NoOutput-OK: Makefile.PL successful
ok 92 - custom-NoOutput-OK: 'make test' returned 1
ok 93 - custom-NoOutput-OK: 'make test' grade reported as 'pass'
ok 94 - custom-NoOutput-OK: report notification correct
ok 95 - custom-NoOutput-OK: test report was mock sent
ok 96 - custom-NoOutput-OK: 'make test' grade explanation correct
ok 97 - Copying custom-NoOutput-OK to temp directory /tmp/kbpEfxzNNv
ok 98 - custom-NoOutput-OK: Build.PL successful
ok 99 - custom-NoOutput-OK: 'perl Build test' returned 1
ok 100 - custom-NoOutput-OK: 'perl Build test' grade reported as 'pass'
ok 101 - custom-NoOutput-OK: report notification correct
ok 102 - custom-NoOutput-OK: test report was mock sent
ok 103 - custom-NoOutput-OK: 'perl Build test' grade explanation correct
ok
t/51_test_report_fail.t ........ 
1..103
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-BailOut to temp directory /tmp/yaB2NzujdU
ok 7 - t-BailOut: Makefile.PL successful
ok 8 - t-BailOut: 'make test' returned 0
ok 9 - t-BailOut: 'make test' grade reported as 'fail'
ok 10 - t-BailOut: report notification correct
ok 11 - t-BailOut: test report was mock sent
ok 12 - t-BailOut: 'make test' grade explanation correct
ok 13 - Copying t-BailOut to temp directory /tmp/OJzbPaW5A9
ok 14 - t-BailOut: Build.PL successful
ok 15 - t-BailOut: 'perl Build test' returned 0
ok 16 - t-BailOut: 'perl Build test' grade reported as 'fail'
ok 17 - t-BailOut: report notification correct
ok 18 - t-BailOut: test report was mock sent
ok 19 - t-BailOut: 'perl Build test' grade explanation correct
ok 20 - Copying t-Fail to temp directory /tmp/WbTbaYZCkO
ok 21 - t-Fail: Makefile.PL successful
ok 22 - t-Fail: 'make test' returned 0
ok 23 - t-Fail: 'make test' grade reported as 'fail'
ok 24 - t-Fail: report notification correct
ok 25 - t-Fail: test report was mock sent
ok 26 - t-Fail: 'make test' grade explanation correct
ok 27 - Copying t-Fail to temp directory /tmp/nwj7PfhtXP
ok 28 - t-Fail: Build.PL successful
ok 29 - t-Fail: 'perl Build test' returned 0
ok 30 - t-Fail: 'perl Build test' grade reported as 'fail'
ok 31 - t-Fail: report notification correct
ok 32 - t-Fail: test report was mock sent
ok 33 - t-Fail: 'perl Build test' grade explanation correct
ok 34 - Copying t-MultipleMatch to temp directory /tmp/k9LD6vcdHG
ok 35 - t-MultipleMatch: Makefile.PL successful
ok 36 - t-MultipleMatch: 'make test' returned 0
ok 37 - t-MultipleMatch: 'make test' grade reported as 'fail'
ok 38 - t-MultipleMatch: report notification correct
ok 39 - t-MultipleMatch: test report was mock sent
ok 40 - t-MultipleMatch: 'make test' grade explanation correct
ok 41 - Copying t-MultipleMatch to temp directory /tmp/7vO1J4NgAX
ok 42 - t-MultipleMatch: Build.PL successful
ok 43 - t-MultipleMatch: 'perl Build test' returned 0
ok 44 - t-MultipleMatch: 'perl Build test' grade reported as 'fail'
ok 45 - t-MultipleMatch: report notification correct
ok 46 - t-MultipleMatch: test report was mock sent
ok 47 - t-MultipleMatch: 'perl Build test' grade explanation correct
ok 48 - Copying test.pl-Fail to temp directory /tmp/L9ZT_r3rup
ok 49 - test.pl-Fail: Makefile.PL successful
ok 50 - test.pl-Fail: 'make test' returned 0
ok 51 - test.pl-Fail: 'make test' grade reported as 'fail'
ok 52 - test.pl-Fail: report notification correct
ok 53 - test.pl-Fail: test report was mock sent
ok 54 - test.pl-Fail: 'make test' grade explanation correct
ok 55 - Copying test.pl-Fail to temp directory /tmp/9gh7DwYcRq
ok 56 - test.pl-Fail: Build.PL successful
ok 57 - test.pl-Fail: 'perl Build test' returned 0
ok 58 - test.pl-Fail: 'perl Build test' grade reported as 'fail'
ok 59 - test.pl-Fail: report notification correct
ok 60 - test.pl-Fail: test report was mock sent
ok 61 - test.pl-Fail: 'perl Build test' grade explanation correct
ok 62 - Copying t-test.pl-Fail-Pass to temp directory /tmp/ukX72AO5hm
ok 63 - t-test.pl-Fail-Pass: Makefile.PL successful
ok 64 - t-test.pl-Fail-Pass: 'make test' returned 0
ok 65 - t-test.pl-Fail-Pass: 'make test' grade reported as 'fail'
ok 66 - t-test.pl-Fail-Pass: report notification correct
ok 67 - t-test.pl-Fail-Pass: test report was mock sent
ok 68 - t-test.pl-Fail-Pass: 'make test' grade explanation correct
ok 69 - Copying t-test.pl-Fail-Pass to temp directory /tmp/n2r6kVUP2B
ok 70 - t-test.pl-Fail-Pass: Build.PL successful
ok 71 - t-test.pl-Fail-Pass: 'perl Build test' returned 0
ok 72 - t-test.pl-Fail-Pass: 'perl Build test' grade reported as 'fail'
ok 73 - t-test.pl-Fail-Pass: report notification correct
ok 74 - t-test.pl-Fail-Pass: test report was mock sent
ok 75 - t-test.pl-Fail-Pass: 'perl Build test' grade explanation correct
ok 76 - Copying t-test.pl-Pass-NoOutput-NOK to temp directory /tmp/jP8sLxApxG
ok 77 - t-test.pl-Pass-NoOutput-NOK: Makefile.PL successful
ok 78 - t-test.pl-Pass-NoOutput-NOK: 'make test' returned 0
ok 79 - t-test.pl-Pass-NoOutput-NOK: 'make test' grade reported as 'fail'
ok 80 - t-test.pl-Pass-NoOutput-NOK: report notification correct
ok 81 - t-test.pl-Pass-NoOutput-NOK: test report was mock sent
ok 82 - t-test.pl-Pass-NoOutput-NOK: 'make test' grade explanation correct
ok 83 - Copying t-test.pl-Pass-NoOutput-NOK to temp directory /tmp/BEIMqrKIzL
ok 84 - t-test.pl-Pass-NoOutput-NOK: Build.PL successful
ok 85 - t-test.pl-Pass-NoOutput-NOK: 'perl Build test' returned 0
ok 86 - t-test.pl-Pass-NoOutput-NOK: 'perl Build test' grade reported as 'fail'
ok 87 - t-test.pl-Pass-NoOutput-NOK: report notification correct
ok 88 - t-test.pl-Pass-NoOutput-NOK: test report was mock sent
ok 89 - t-test.pl-Pass-NoOutput-NOK: 'perl Build test' grade explanation correct
ok 90 - Copying custom-NoOutput-NOK to temp directory /tmp/t83_taTSC6
ok 91 - custom-NoOutput-NOK: Makefile.PL successful
ok 92 - custom-NoOutput-NOK: 'make test' returned 0
ok 93 - custom-NoOutput-NOK: 'make test' grade reported as 'fail'
ok 94 - custom-NoOutput-NOK: report notification correct
ok 95 - custom-NoOutput-NOK: test report was mock sent
ok 96 - custom-NoOutput-NOK: 'make test' grade explanation correct
ok 97 - Copying custom-NoOutput-NOK to temp directory /tmp/6oQeYZsixK
ok 98 - custom-NoOutput-NOK: Build.PL successful
ok 99 - custom-NoOutput-NOK: 'perl Build test' returned 0
ok 100 - custom-NoOutput-NOK: 'perl Build test' grade reported as 'fail'
ok 101 - custom-NoOutput-NOK: report notification correct
ok 102 - custom-NoOutput-NOK: test report was mock sent
ok 103 - custom-NoOutput-NOK: 'perl Build test' grade explanation correct
ok
t/52_test_report_unknown.t ..... 
1..33
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying NoTestDir to temp directory /tmp/Es_on5Lfmr
ok 7 - NoTestDir: Makefile.PL successful
ok 8 - NoTestDir: 'make test' returned 1
ok 9 - NoTestDir: 'make test' grade reported as 'unknown'
ok 10 - NoTestDir: report notification correct
ok 11 - NoTestDir: test report was mock sent
ok 12 - NoTestDir: 'make test' grade explanation correct
ok 13 - Copying NoTestDir to temp directory /tmp/ATYK0uBFPY
ok 14 - NoTestDir: Build.PL successful
ok 15 - NoTestDir: 'perl Build test' returned 1
ok 16 - NoTestDir: 'perl Build test' grade reported as 'unknown'
ok 17 - NoTestDir: report notification correct
ok 18 - NoTestDir: test report was mock sent
ok 19 - NoTestDir: 'perl Build test' grade explanation correct
ok 20 - Copying NoTestFiles to temp directory /tmp/yqqShfpVif
ok 21 - NoTestFiles: Makefile.PL successful
ok 22 - NoTestFiles: 'make test' returned 1
ok 23 - NoTestFiles: 'make test' grade reported as 'unknown'
ok 24 - NoTestFiles: report notification correct
ok 25 - NoTestFiles: test report was mock sent
ok 26 - NoTestFiles: 'make test' grade explanation correct
ok 27 - Copying NoTestFiles to temp directory /tmp/KnLmvI1Ahe
ok 28 - NoTestFiles: Build.PL successful
ok 29 - NoTestFiles: 'perl Build test' returned 1
ok 30 - NoTestFiles: 'perl Build test' grade reported as 'unknown'
ok 31 - NoTestFiles: report notification correct
ok 32 - NoTestFiles: test report was mock sent
ok 33 - NoTestFiles: 'perl Build test' grade explanation correct
ok
t/53_test_report_na.t .......... 
1..89
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-PrereqPerl-NOK to temp directory /tmp/48SkbABe0U
ok 7 - t-PrereqPerl-NOK: Makefile.PL successful
ok 8 - t-PrereqPerl-NOK: 'make test' returned 0
ok 9 - t-PrereqPerl-NOK: 'make test' grade reported as 'na'
ok 10 - t-PrereqPerl-NOK: report notification correct
ok 11 - t-PrereqPerl-NOK: test report was mock sent
ok 12 - t-PrereqPerl-NOK: 'make test' grade explanation correct
ok 13 - Copying t-PrereqPerl-NOK to temp directory /tmp/ycL9d2qqS6
ok 14 - t-PrereqPerl-NOK: Build.PL successful
ok 15 - t-PrereqPerl-NOK: 'perl Build test' returned 0
ok 16 - t-PrereqPerl-NOK: 'perl Build test' grade reported as 'na'
ok 17 - t-PrereqPerl-NOK: report notification correct
ok 18 - t-PrereqPerl-NOK: test report was mock sent
ok 19 - t-PrereqPerl-NOK: 'perl Build test' grade explanation correct
ok 20 - Copying test.pl-PrereqPerl-NOK to temp directory /tmp/gFnfXFNfWr
ok 21 - test.pl-PrereqPerl-NOK: Makefile.PL successful
ok 22 - test.pl-PrereqPerl-NOK: 'make test' returned 0
ok 23 - test.pl-PrereqPerl-NOK: 'make test' grade reported as 'na'
ok 24 - test.pl-PrereqPerl-NOK: report notification correct
ok 25 - test.pl-PrereqPerl-NOK: test report was mock sent
ok 26 - test.pl-PrereqPerl-NOK: 'make test' grade explanation correct
ok 27 - Copying test.pl-PrereqPerl-NOK to temp directory /tmp/3LEkuC9DNd
ok 28 - test.pl-PrereqPerl-NOK: Build.PL successful
ok 29 - test.pl-PrereqPerl-NOK: 'perl Build test' returned 0
ok 30 - test.pl-PrereqPerl-NOK: 'perl Build test' grade reported as 'na'
ok 31 - test.pl-PrereqPerl-NOK: report notification correct
ok 32 - test.pl-PrereqPerl-NOK: test report was mock sent
ok 33 - test.pl-PrereqPerl-NOK: 'perl Build test' grade explanation correct
ok 34 - Copying t-NoSupport to temp directory /tmp/vy6JkC10cy
ok 35 - t-NoSupport: Makefile.PL successful
ok 36 - t-NoSupport: 'make test' returned 0
ok 37 - t-NoSupport: 'make test' grade reported as 'na'
ok 38 - t-NoSupport: report notification correct
ok 39 - t-NoSupport: test report was mock sent
ok 40 - t-NoSupport: 'make test' grade explanation correct
ok 41 - Copying t-NoSupport to temp directory /tmp/8jRQXQVnIZ
ok 42 - t-NoSupport: Build.PL successful
ok 43 - t-NoSupport: 'perl Build test' returned 0
ok 44 - t-NoSupport: 'perl Build test' grade reported as 'na'
ok 45 - t-NoSupport: report notification correct
ok 46 - t-NoSupport: test report was mock sent
ok 47 - t-NoSupport: 'perl Build test' grade explanation correct
ok 48 - Copying t-OSUnsupported to temp directory /tmp/NKTRsm7Fn8
ok 49 - t-OSUnsupported: Makefile.PL successful
ok 50 - t-OSUnsupported: 'make test' returned 0
ok 51 - t-OSUnsupported: 'make test' grade reported as 'na'
ok 52 - t-OSUnsupported: report notification correct
ok 53 - t-OSUnsupported: test report was mock sent
ok 54 - t-OSUnsupported: 'make test' grade explanation correct
ok 55 - Copying t-OSUnsupported to temp directory /tmp/gDInDH6HbV
ok 56 - t-OSUnsupported: Build.PL successful
ok 57 - t-OSUnsupported: 'perl Build test' returned 0
ok 58 - t-OSUnsupported: 'perl Build test' grade reported as 'na'
ok 59 - t-OSUnsupported: report notification correct
ok 60 - t-OSUnsupported: test report was mock sent
ok 61 - t-OSUnsupported: 'perl Build test' grade explanation correct
ok 62 - Copying test.pl-OSUnsupported to temp directory /tmp/o8RD9ebNMG
ok 63 - test.pl-OSUnsupported: Makefile.PL successful
ok 64 - test.pl-OSUnsupported: 'make test' returned 0
ok 65 - test.pl-OSUnsupported: 'make test' grade reported as 'na'
ok 66 - test.pl-OSUnsupported: report notification correct
ok 67 - test.pl-OSUnsupported: test report was mock sent
ok 68 - test.pl-OSUnsupported: 'make test' grade explanation correct
ok 69 - Copying test.pl-OSUnsupported to temp directory /tmp/3yuNkejqVs
ok 70 - test.pl-OSUnsupported: Build.PL successful
ok 71 - test.pl-OSUnsupported: 'perl Build test' returned 0
ok 72 - test.pl-OSUnsupported: 'perl Build test' grade reported as 'na'
ok 73 - test.pl-OSUnsupported: report notification correct
ok 74 - test.pl-OSUnsupported: test report was mock sent
ok 75 - test.pl-OSUnsupported: 'perl Build test' grade explanation correct
ok 76 - Copying t-RequirePerl to temp directory /tmp/zk32oXXHtk
ok 77 - t-RequirePerl: Makefile.PL successful
ok 78 - t-RequirePerl: 'make test' returned 0
ok 79 - t-RequirePerl: 'make test' grade reported as 'na'
ok 80 - t-RequirePerl: report notification correct
ok 81 - t-RequirePerl: test report was mock sent
ok 82 - t-RequirePerl: 'make test' grade explanation correct
ok 83 - Copying t-RequirePerl to temp directory /tmp/FSSjcE0O4A
ok 84 - t-RequirePerl: Build.PL successful
ok 85 - t-RequirePerl: 'perl Build test' returned 0
ok 86 - t-RequirePerl: 'perl Build test' grade reported as 'na'
ok 87 - t-RequirePerl: report notification correct
ok 88 - t-RequirePerl: test report was mock sent
ok 89 - t-RequirePerl: 'perl Build test' grade explanation correct
ok
t/54_test_report_split.t ....... 
1..61
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-test.pl-Pass-NoOutput-OK to temp directory /tmp/mYkUFGBpkA
ok 7 - t-test.pl-Pass-NoOutput-OK: Makefile.PL successful
ok 8 - t-test.pl-Pass-NoOutput-OK: 'make test' returned 1
ok 9 - t-test.pl-Pass-NoOutput-OK: 'make test' grade reported as 'pass'
ok 10 - t-test.pl-Pass-NoOutput-OK: report notification correct
ok 11 - t-test.pl-Pass-NoOutput-OK: test report was mock sent
ok 12 - t-test.pl-Pass-NoOutput-OK: 'make test' grade explanation correct
ok 13 - Copying t-test.pl-Pass-NoOutput-OK to temp directory /tmp/wxRHqJKhA1
ok 14 - t-test.pl-Pass-NoOutput-OK: Build.PL successful
ok 15 - t-test.pl-Pass-NoOutput-OK: 'perl Build test' returned 0
ok 16 - t-test.pl-Pass-NoOutput-OK: 'perl Build test' grade reported as 'fail'
ok 17 - t-test.pl-Pass-NoOutput-OK: report notification correct
ok 18 - t-test.pl-Pass-NoOutput-OK: test report was mock sent
ok 19 - t-test.pl-Pass-NoOutput-OK: 'perl Build test' grade explanation correct
ok 20 - Copying t-Recurse-Fail-t to temp directory /tmp/kq5NyARv_e
ok 21 - t-Recurse-Fail-t: Makefile.PL successful
ok 22 - t-Recurse-Fail-t: 'make test' returned 0
ok 23 - t-Recurse-Fail-t: 'make test' grade reported as 'fail'
ok 24 - t-Recurse-Fail-t: report notification correct
ok 25 - t-Recurse-Fail-t: test report was mock sent
ok 26 - t-Recurse-Fail-t: 'make test' grade explanation correct
ok 27 - Copying t-Recurse-Fail-t to temp directory /tmp/x3cFHzAD32
ok 28 - t-Recurse-Fail-t: Build.PL successful
ok 29 - t-Recurse-Fail-t: 'perl Build test' returned 1
ok 30 - t-Recurse-Fail-t: 'perl Build test' grade reported as 'unknown'
ok 31 - t-Recurse-Fail-t: report notification correct
ok 32 - t-Recurse-Fail-t: test report was mock sent
ok 33 - t-Recurse-Fail-t: 'perl Build test' grade explanation correct
ok 34 - Copying t-Recurse-Fail-test.pl to temp directory /tmp/aBqCDtQDOe
ok 35 - t-Recurse-Fail-test.pl: Makefile.PL successful
ok 36 - t-Recurse-Fail-test.pl: 'make test' returned 0
ok 37 - t-Recurse-Fail-test.pl: 'make test' grade reported as 'fail'
ok 38 - t-Recurse-Fail-test.pl: report notification correct
ok 39 - t-Recurse-Fail-test.pl: test report was mock sent
ok 40 - t-Recurse-Fail-test.pl: 'make test' grade explanation correct
ok 41 - Copying t-Recurse-Fail-test.pl to temp directory /tmp/OtBtMi8R4F
ok 42 - t-Recurse-Fail-test.pl: Build.PL successful
ok 43 - t-Recurse-Fail-test.pl: 'perl Build test' returned 1
ok 44 - t-Recurse-Fail-test.pl: 'perl Build test' grade reported as 'unknown'
ok 45 - t-Recurse-Fail-test.pl: report notification correct
ok 46 - t-Recurse-Fail-test.pl: test report was mock sent
ok 47 - t-Recurse-Fail-test.pl: 'perl Build test' grade explanation correct
ok 48 - Copying NoTestTarget to temp directory /tmp/sLk5trMFga
ok 49 - NoTestTarget: Makefile.PL successful
ok 50 - NoTestTarget: 'make test' returned 1
ok 51 - NoTestTarget: 'make test' grade reported as 'unknown'
ok 52 - NoTestTarget: report notification correct
ok 53 - NoTestTarget: test report was mock sent
ok 54 - NoTestTarget: 'make test' grade explanation correct
ok 55 - Copying NoTestTarget to temp directory /tmp/Di2XCkXiv5
ok 56 - NoTestTarget: Build.PL successful
ok 57 - NoTestTarget: 'perl Build test' returned 1
ok 58 - NoTestTarget: 'perl Build test' grade reported as 'unknown'
ok 59 - NoTestTarget: report notification correct
ok 60 - NoTestTarget: test report was mock sent
ok 61 - NoTestTarget: 'perl Build test' grade explanation correct
ok
t/55_test_report_discard.t ..... 
1..92
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-PrereqMiss to temp directory /tmp/FHwuFtSZKG
ok 7 - t-PrereqMiss: Makefile.PL successful
ok 8 - t-PrereqMiss: 'make test' returned 0
ok 9 - t-PrereqMiss: 'make test' prerequisites not satisifed
ok 10 - t-PrereqMiss: discard message correct
ok 11 - t-PrereqMiss: test results discarded
ok 12 - t-PrereqMiss: 'make test' grade explanation correct
ok 13 - Copying t-PrereqMiss to temp directory /tmp/IXKvsLUoLu
ok 14 - t-PrereqMiss: Build.PL successful
ok 15 - t-PrereqMiss: 'perl Build test' returned 0
ok 16 - t-PrereqMiss: 'perl Build test' prerequisites not satisifed
ok 17 - t-PrereqMiss: discard message correct
ok 18 - t-PrereqMiss: test results discarded
ok 19 - t-PrereqMiss: 'perl Build test' grade explanation correct
ok 20 - Copying t-NoTestsButPrereqMiss to temp directory /tmp/TGzmK08Qei
ok 21 - t-NoTestsButPrereqMiss: Makefile.PL successful
ok 22 - t-NoTestsButPrereqMiss: 'make test' returned 0
ok 23 - t-NoTestsButPrereqMiss: 'make test' prerequisites not satisifed
ok 24 - t-NoTestsButPrereqMiss: discard message correct
ok 25 - t-NoTestsButPrereqMiss: test results discarded
ok 26 - t-NoTestsButPrereqMiss: 'make test' grade explanation correct
ok 27 - Copying t-NoTestsButPrereqMiss to temp directory /tmp/Ra77NinP1v
ok 28 - t-NoTestsButPrereqMiss: Build.PL successful
ok 29 - t-NoTestsButPrereqMiss: 'perl Build test' returned 0
ok 30 - t-NoTestsButPrereqMiss: 'perl Build test' prerequisites not satisifed
ok 31 - t-NoTestsButPrereqMiss: discard message correct
ok 32 - t-NoTestsButPrereqMiss: test results discarded
ok 33 - t-NoTestsButPrereqMiss: 'perl Build test' grade explanation correct
ok 34 - Copying test.pl-PrereqMiss to temp directory /tmp/b68Q0x4IIS
ok 35 - test.pl-PrereqMiss: Makefile.PL successful
ok 36 - test.pl-PrereqMiss: 'make test' returned 0
ok 37 - test.pl-PrereqMiss: 'make test' prerequisites not satisifed
ok 38 - test.pl-PrereqMiss: discard message correct
ok 39 - test.pl-PrereqMiss: test results discarded
ok 40 - test.pl-PrereqMiss: 'make test' grade explanation correct
ok 41 - Copying test.pl-PrereqMiss to temp directory /tmp/v5RanApqbf
ok 42 - test.pl-PrereqMiss: Build.PL successful
ok 43 - test.pl-PrereqMiss: 'perl Build test' returned 0
ok 44 - test.pl-PrereqMiss: 'perl Build test' prerequisites not satisifed
ok 45 - test.pl-PrereqMiss: discard message correct
ok 46 - test.pl-PrereqMiss: test results discarded
ok 47 - test.pl-PrereqMiss: 'perl Build test' grade explanation correct
ok 48 - Copying t-PrereqFail to temp directory /tmp/GyIEa1p9ra
ok 49 - t-PrereqFail: Makefile.PL successful
ok 50 - t-PrereqFail: 'make test' returned 0
ok 51 - t-PrereqFail: 'make test' prerequisites not satisifed
ok 52 - t-PrereqFail: discard message correct
ok 53 - t-PrereqFail: test results discarded
ok 54 - t-PrereqFail: 'make test' grade explanation correct
ok 55 - Copying t-PrereqFail to temp directory /tmp/c2qfbcquWt
ok 56 - t-PrereqFail: Build.PL successful
ok 57 - t-PrereqFail: 'perl Build test' returned 0
ok 58 - t-PrereqFail: 'perl Build test' prerequisites not satisifed
ok 59 - t-PrereqFail: discard message correct
ok 60 - t-PrereqFail: test results discarded
ok 61 - t-PrereqFail: 'perl Build test' grade explanation correct
ok 62 - Copying test.pl-PrereqFail to temp directory /tmp/hgZAeatwnf
ok 63 - test.pl-PrereqFail: Makefile.PL successful
ok 64 - test.pl-PrereqFail: 'make test' returned 0
ok 65 - test.pl-PrereqFail: 'make test' prerequisites not satisifed
ok 66 - test.pl-PrereqFail: discard message correct
ok 67 - test.pl-PrereqFail: test results discarded
ok 68 - test.pl-PrereqFail: 'make test' grade explanation correct
ok 69 - Copying test.pl-PrereqFail to temp directory /tmp/Ii4I0TTtyB
ok 70 - test.pl-PrereqFail: Build.PL successful
ok 71 - test.pl-PrereqFail: 'perl Build test' returned 0
ok 72 - test.pl-PrereqFail: 'perl Build test' prerequisites not satisifed
ok 73 - test.pl-PrereqFail: discard message correct
ok 74 - test.pl-PrereqFail: test results discarded
ok 75 - test.pl-PrereqFail: 'perl Build test' grade explanation correct
ok 76 - Copying t-Harness-Fail to temp directory /tmp/j_i1M141TV
ok 77 - t-Harness-Fail: Makefile.PL successful
ok 78 - t-Harness-Fail: 'make test' returned 0
ok 79 - t-Harness-Fail: 'make test' prerequisites not satisifed
ok 80 - t-Harness-Fail: discard message correct
ok 81 - t-Harness-Fail: test results discarded
ok 82 - t-Harness-Fail: 'make test' grade explanation correct
ok 83 - Copying t-Harness-Fail to temp directory /tmp/LmdOqUWM_b
ok 84 - t-Harness-Fail: Build.PL successful
ok 85 - t-Harness-Fail: 'perl Build test' returned 0
ok 86 - t-Harness-Fail: 'perl Build test' prerequisites not satisifed
ok 87 - t-Harness-Fail: discard message correct
ok 88 - t-Harness-Fail: test results discarded
ok 89 - t-Harness-Fail: 'perl Build test' grade explanation correct
ok 90 - grade_PL skips Perl6
ok 91 - grade_make skips Perl6
ok 92 - grade_test skips Perl6
ok
t/56_test_report_by_harness.t .. 
1..61
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-NoOutput to temp directory /tmp/Oi0w5et56W
ok 7 - t-NoOutput: Makefile.PL successful
ok 8 - t-NoOutput: 'make test' returned 0
ok 9 - t-NoOutput: 'make test' grade reported as 'fail'
ok 10 - t-NoOutput: report notification correct
ok 11 - t-NoOutput: test report was mock sent
ok 12 - t-NoOutput: 'make test' grade explanation correct
ok 13 - Copying t-NoOutput to temp directory /tmp/DQvfLGVfv_
ok 14 - t-NoOutput: Build.PL successful
ok 15 - t-NoOutput: 'perl Build test' returned 0
ok 16 - t-NoOutput: 'perl Build test' grade reported as 'fail'
ok 17 - t-NoOutput: report notification correct
ok 18 - t-NoOutput: test report was mock sent
ok 19 - t-NoOutput: 'perl Build test' grade explanation correct
ok 20 - Copying t-NoOutput-die to temp directory /tmp/JVZ71cSJEk
ok 21 - t-NoOutput-die: Makefile.PL successful
ok 22 - t-NoOutput-die: 'make test' returned 0
ok 23 - t-NoOutput-die: 'make test' grade reported as 'fail'
ok 24 - t-NoOutput-die: report notification correct
ok 25 - t-NoOutput-die: test report was mock sent
ok 26 - t-NoOutput-die: 'make test' grade explanation correct
ok 27 - Copying t-NoOutput-die to temp directory /tmp/VXsLJGBDid
ok 28 - t-NoOutput-die: Build.PL successful
ok 29 - t-NoOutput-die: 'perl Build test' returned 0
ok 30 - t-NoOutput-die: 'perl Build test' grade reported as 'fail'
ok 31 - t-NoOutput-die: report notification correct
ok 32 - t-NoOutput-die: test report was mock sent
ok 33 - t-NoOutput-die: 'perl Build test' grade explanation correct
ok 34 - Copying test.pl-NoOutput-OK to temp directory /tmp/FP1hg_ukvD
ok 35 - test.pl-NoOutput-OK: Makefile.PL successful
ok 36 - test.pl-NoOutput-OK: 'make test' returned 1
ok 37 - test.pl-NoOutput-OK: 'make test' grade reported as 'pass'
ok 38 - test.pl-NoOutput-OK: report notification correct
ok 39 - test.pl-NoOutput-OK: test report was mock sent
ok 40 - test.pl-NoOutput-OK: 'make test' grade explanation correct
ok 41 - Copying test.pl-NoOutput-OK to temp directory /tmp/T2nS581F3Z
ok 42 - test.pl-NoOutput-OK: Build.PL successful
ok 43 - test.pl-NoOutput-OK: 'perl Build test' returned 0
ok 44 - test.pl-NoOutput-OK: 'perl Build test' grade reported as 'fail'
ok 45 - test.pl-NoOutput-OK: report notification correct
ok 46 - test.pl-NoOutput-OK: test report was mock sent
ok 47 - test.pl-NoOutput-OK: 'perl Build test' grade explanation correct
ok 48 - Copying test.pl-NoOutput-NOK to temp directory /tmp/7dtyZp5FdG
ok 49 - test.pl-NoOutput-NOK: Makefile.PL successful
ok 50 - test.pl-NoOutput-NOK: 'make test' returned 0
ok 51 - test.pl-NoOutput-NOK: 'make test' grade reported as 'fail'
ok 52 - test.pl-NoOutput-NOK: report notification correct
ok 53 - test.pl-NoOutput-NOK: test report was mock sent
ok 54 - test.pl-NoOutput-NOK: 'make test' grade explanation correct
ok 55 - Copying test.pl-NoOutput-NOK to temp directory /tmp/5YRwzVyIf5
ok 56 - test.pl-NoOutput-NOK: Build.PL successful
ok 57 - test.pl-NoOutput-NOK: 'perl Build test' returned 0
ok 58 - test.pl-NoOutput-NOK: 'perl Build test' grade reported as 'fail'
ok 59 - test.pl-NoOutput-NOK: report notification correct
ok 60 - test.pl-NoOutput-NOK: test report was mock sent
ok 61 - test.pl-NoOutput-NOK: 'perl Build test' grade explanation correct
ok
t/57_hang_interrupt.t .......... 
1..33
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-Pass to temp directory /tmp/DEb7Pfx1P0
ok 7 - generate report for t-Pass
ok 8 - report was sent for t-Pass
ok 9 - saw report sent message for t-Pass
ok 10 - home directory mocked
ok 11 - config directory created
ok 12 - created mock metabase file for testing
ok 13 - created temp config file
ok 14 - Copying t-Fail to temp directory /tmp/BQCLb2Cyu5
ok 15 - generate report for t-Fail
ok 16 - report was sent for t-Fail
ok 17 - saw report sent message for t-Fail
ok 18 - home directory mocked
ok 19 - config directory created
ok 20 - created mock metabase file for testing
ok 21 - created temp config file
ok 22 - Copying PL-Hang to temp directory /tmp/9t3bWqUFoL
ok 23 - generate report for PL-Hang
ok 24 - report not sent for PL-Hang
ok 25 - saw report not sent message for PL-Hang
ok 26 - home directory mocked
ok 27 - config directory created
ok 28 - created mock metabase file for testing
ok 29 - created temp config file
ok 30 - Copying t-Hang to temp directory /tmp/M1gZs6U6qN
ok 31 - generate report for t-Hang
ok 32 - report not sent for t-Hang
ok 33 - saw report not sent message for t-Hang
ok
t/60_discard_triggers.t ........ 
1..12
ok 1 - require CPAN::Reporter;
ok 2 - require CPAN::Reporter::History;
ok 3 - home directory mocked
ok 4 - config directory created
ok 5 - created mock metabase file for testing
ok 6 - created temp config file
ok 7 - Build -j2: grade is 'discard'
ok 8 - Build -j2: grade_msg is correct
ok 9 - Build -j3: grade is 'discard'
ok 10 - Build -j3: grade_msg is correct
ok 11 - makefile out of date: grade is 'discard'
ok 12 - makefile out of date: grade_msg is correct
ok
t/61_bad_dist_names.t .......... 
1..66
ok 1 - require CPAN::Reporter;
ok 2 - require CPAN::Reporter::History;
ok 3 - home directory mocked
ok 4 - config directory created
ok 5 - created mock metabase file for testing
ok 6 - created temp config file
ok 7 - Copying t-Fail to temp directory /tmp/21qXxVn5gx
ok 8 - generate report for proper distribution name (tar.gz)
ok 9 - report was sent for proper distribution name (tar.gz)
ok 10 - saw report sent message for proper distribution name (tar.gz)
ok 11 - JOHNQP/Bogus-Module-1.21.tar.gz seen in history as FAIL
ok 12 - Copying t-Fail to temp directory /tmp/gRQXAbuRd2
ok 13 - generate report for proper distribution name (tar.bz2)
ok 14 - report was sent for proper distribution name (tar.bz2)
ok 15 - saw report sent message for proper distribution name (tar.bz2)
ok 16 - JOHNQP/Bogus-Module-1.22.tar.gz seen in history as FAIL
ok 17 - Copying t-Fail to temp directory /tmp/EdHkKKP1Zy
ok 18 - generate report for proper distribution name (tgz)
ok 19 - report was sent for proper distribution name (tgz)
ok 20 - saw report sent message for proper distribution name (tgz)
ok 21 - JOHNQP/Bogus-Module-1.23.tgz seen in history as FAIL
ok 22 - Copying t-Fail to temp directory /tmp/9yEDBxj3AT
ok 23 - generate report for proper distribution name (zip)
ok 24 - report was sent for proper distribution name (zip)
ok 25 - saw report sent message for proper distribution name (zip)
ok 26 - JOHNQP/Bogus-Module-1.24.zip seen in history as FAIL
ok 27 - Copying t-Fail to temp directory /tmp/QcaxgV7795
ok 28 - generate report for proper distribution name (ZIP)
ok 29 - report was sent for proper distribution name (ZIP)
ok 30 - saw report sent message for proper distribution name (ZIP)
ok 31 - JOHNQP/Bogus-Module-1.25.ZIP seen in history as FAIL
ok 32 - Copying t-Fail to temp directory /tmp/UReHK1Kz_Q
ok 33 - generate report for proper distribution name (v1.23)
ok 34 - report was sent for proper distribution name (v1.23)
ok 35 - saw report sent message for proper distribution name (v1.23)
ok 36 - JOHNQP/Bogus-Module-v1.26.tgz seen in history as FAIL
ok 37 - Copying t-Fail to temp directory /tmp/vUn6spO_s9
ok 38 - generate report for proper distribution name (1.2_01)
ok 39 - report was sent for proper distribution name (1.2_01)
ok 40 - saw report sent message for proper distribution name (1.2_01)
ok 41 - JOHNQP/Bogus-Module-1.2_01.tgz seen in history as FAIL
ok 42 - Copying t-Fail to temp directory /tmp/X4WY1Cz0qB
ok 43 - generate report for proper distribution name (v1.2a)
ok 44 - report was sent for proper distribution name (v1.2a)
ok 45 - saw report sent message for proper distribution name (v1.2a)
ok 46 - JOHNQP/Bogus-Module-v1.2a.tgz seen in history as FAIL
ok 47 - Copying t-Fail to temp directory /tmp/hK5gzOVJhK
ok 48 - generate report for proper distribution name (v1.2_01)
ok 49 - report was sent for proper distribution name (v1.2_01)
ok 50 - saw report sent message for proper distribution name (v1.2_01)
ok 51 - JOHNQP/Bogus-Module-v1.2_02.tgz seen in history as FAIL
ok 52 - Copying t-Fail to temp directory /tmp/vUcVw6zGRf
ok 53 - generate report for missing extension
ok 54 - report not sent for missing extension
ok 55 - saw report not sent message for missing extension
ok 56 - JOHNQP/Bogus-Module-1.31 seen in history as DISCARD
ok 57 - Copying t-Fail to temp directory /tmp/cgDmU23a5T
ok 58 - generate report for missing version
ok 59 - report not sent for missing version
ok 60 - saw report not sent message for missing version
ok 61 - JOHNQP/Bogus-Module.tgz seen in history as DISCARD
ok 62 - Copying t-Fail to temp directory /tmp/YLGdDDLR4N
ok 63 - generate report for raw pm file
ok 64 - report not sent for raw pm file
ok 65 - saw report not sent message for raw pm file
ok 66 - JOHNQP/Module.pm seen in history as DISCARD
ok
t/62_duplicate_reports.t ....... 
1..134
ok 1 - require CPAN::Reporter;
ok 2 - require CPAN::Reporter::History;
ok 3 - home directory mocked
ok 4 - config directory created
ok 5 - created mock metabase file for testing
ok 6 - created temp config file
ok 7 - Copying PL-Fail to temp directory /tmp/nN1sZjPx7q
ok 8 - generate report for first PL failure
ok 9 - report was sent for first PL failure
ok 10 - saw report sent message for first PL failure
ok 11 - first PL failure: have_tested( base_id ) is true
ok 12 - first PL failure: have_tested returns AoH
ok 13 - first PL failure: have_tested struct has dist name
ok 14 - home directory mocked
ok 15 - config directory created
ok 16 - created mock metabase file for testing
ok 17 - created temp config file
ok 18 - Copying PL-Fail to temp directory /tmp/27sYr1Y1zR
ok 19 - generate report for second PL failure
ok 20 - report not sent for second PL failure
ok 21 - saw report not sent message for second PL failure
ok 22 - second PL failure: have_tested( base_id ) is true
ok 23 - second PL failure: have_tested returns AoH
ok 24 - second PL failure: have_tested struct has dist name
ok 25 - home directory mocked
ok 26 - config directory created
ok 27 - created mock metabase file for testing
ok 28 - created temp config file
ok 29 - Copying PL-NoSupport to temp directory /tmp/_Ui5gxzp8h
ok 30 - generate report for first PL unsupported
ok 31 - report was sent for first PL unsupported
ok 32 - saw report sent message for first PL unsupported
ok 33 - first PL unsupported: have_tested( base_id ) is true
ok 34 - first PL unsupported: have_tested returns AoH
ok 35 - first PL unsupported: have_tested struct has dist name
ok 36 - home directory mocked
ok 37 - config directory created
ok 38 - created mock metabase file for testing
ok 39 - created temp config file
ok 40 - Copying make-Fail to temp directory /tmp/VBbkZEVIi3
ok 41 - generate report for first make failure
ok 42 - report was sent for first make failure
ok 43 - saw report sent message for first make failure
ok 44 - first make failure: have_tested( base_id ) is true
ok 45 - first make failure: have_tested returns AoH
ok 46 - first make failure: have_tested struct has dist name
ok 47 - home directory mocked
ok 48 - config directory created
ok 49 - created mock metabase file for testing
ok 50 - created temp config file
ok 51 - Copying make-Fail to temp directory /tmp/mBsfEJSUZX
ok 52 - generate report for second make failure
ok 53 - report not sent for second make failure
ok 54 - saw report not sent message for second make failure
ok 55 - second make failure: have_tested( base_id ) is true
ok 56 - second make failure: have_tested returns AoH
ok 57 - second make failure: have_tested struct has dist name
ok 58 - home directory mocked
ok 59 - config directory created
ok 60 - created mock metabase file for testing
ok 61 - created temp config file
ok 62 - Copying NoTestFiles to temp directory /tmp/CSE9awF1Tm
ok 63 - generate report for first test unknown
ok 64 - report was sent for first test unknown
ok 65 - saw report sent message for first test unknown
ok 66 - first test unknown: have_tested( base_id ) is true
ok 67 - first test unknown: have_tested returns AoH
ok 68 - first test unknown: have_tested struct has dist name
ok 69 - home directory mocked
ok 70 - config directory created
ok 71 - created mock metabase file for testing
ok 72 - created temp config file
ok 73 - Copying t-Fail to temp directory /tmp/iOw0G7KtZP
ok 74 - generate report for first test failure
ok 75 - report was sent for first test failure
ok 76 - saw report sent message for first test failure
ok 77 - first test failure: have_tested( base_id ) is true
ok 78 - first test failure: have_tested returns AoH
ok 79 - first test failure: have_tested struct has dist name
ok 80 - home directory mocked
ok 81 - config directory created
ok 82 - created mock metabase file for testing
ok 83 - created temp config file
ok 84 - Copying t-Fail to temp directory /tmp/BSxTuj6ZbD
ok 85 - generate report for second test failure (but send dup)
ok 86 - report was sent for second test failure (but send dup)
ok 87 - saw report sent message for second test failure (but send dup)
ok 88 - second test failure (but send dup): have_tested( base_id ) is true
ok 89 - second test failure (but send dup): have_tested returns AoH
ok 90 - second test failure (but send dup): have_tested struct has dist name
ok 91 - home directory mocked
ok 92 - config directory created
ok 93 - created mock metabase file for testing
ok 94 - created temp config file
ok 95 - Copying t-PrereqMiss to temp directory /tmp/swE9z6PQCX
ok 96 - generate report for first discard
ok 97 - report not sent for first discard
ok 98 - saw report not sent message for first discard
ok 99 - first discard: have_tested( base_id ) is true
ok 100 - first discard: have_tested returns AoH
ok 101 - first discard: have_tested struct has dist name
ok 102 - home directory mocked
ok 103 - config directory created
ok 104 - created mock metabase file for testing
ok 105 - created temp config file
ok 106 - Copying t-Fail to temp directory /tmp/68Hg4xO6xX
ok 107 - generate report for third test failure (new version)
ok 108 - report was sent for third test failure (new version)
ok 109 - saw report sent message for third test failure (new version)
ok 110 - third test failure (new version): have_tested( base_id ) is true
ok 111 - third test failure (new version): have_tested returns AoH
ok 112 - third test failure (new version): have_tested struct has dist name
ok 113 - home directory mocked
ok 114 - config directory created
ok 115 - created mock metabase file for testing
ok 116 - created temp config file
ok 117 - Copying t-PrereqMiss to temp directory /tmp/NUjbxB_5M8
ok 118 - generate report for second discard
ok 119 - report not sent for second discard
ok 120 - saw report not sent message for second discard
ok 121 - second discard: have_tested( base_id ) is true
ok 122 - second discard: have_tested returns AoH
ok 123 - second discard: have_tested struct has dist name
ok 124 - have_tested() returns false if not found
ok 125 - found history file
ok 126 - history file length is 8
ok 127 - history starts with version comment
ok 128 - history matched results[0]
ok 129 - history matched results[1]
ok 130 - history matched results[2]
ok 131 - history matched results[3]
ok 132 - history matched results[4]
ok 133 - history matched results[5]
ok 134 - history matched results[6]
ok
t/63_config_send_report.t ...... 
1..49
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying PL-Fail to temp directory /tmp/YtO94TqapV
ok 7 - generate report for send_PL_report 'no'
ok 8 - report not sent for send_PL_report 'no'
ok 9 - saw report not sent message for send_PL_report 'no'
ok 10 - home directory mocked
ok 11 - config directory created
ok 12 - created mock metabase file for testing
ok 13 - created temp config file
ok 14 - Copying make-Fail to temp directory /tmp/1fB9dC91de
ok 15 - generate report for first make failure
ok 16 - report not sent for first make failure
ok 17 - saw report not sent message for first make failure
ok 18 - home directory mocked
ok 19 - config directory created
ok 20 - created mock metabase file for testing
ok 21 - created temp config file
ok 22 - Copying t-Fail to temp directory /tmp/E80OJ0K5tw
ok 23 - generate report for send_test_report 'no'
ok 24 - report not sent for send_test_report 'no'
ok 25 - saw report not sent message for send_test_report 'no'
ok 26 - home directory mocked
ok 27 - config directory created
ok 28 - created mock metabase file for testing
ok 29 - created temp config file
ok 30 - Copying PL-Fail to temp directory /tmp/d8rSOwQvbn
ok 31 - generate report for send_PL_report 'yes'
ok 32 - report was sent for send_PL_report 'yes'
ok 33 - saw report sent message for send_PL_report 'yes'
ok 34 - home directory mocked
ok 35 - config directory created
ok 36 - created mock metabase file for testing
ok 37 - created temp config file
ok 38 - Copying make-Fail to temp directory /tmp/tVq7fss2y6
ok 39 - generate report for first make failure
ok 40 - report was sent for first make failure
ok 41 - saw report sent message for first make failure
ok 42 - home directory mocked
ok 43 - config directory created
ok 44 - created mock metabase file for testing
ok 45 - created temp config file
ok 46 - Copying t-Fail to temp directory /tmp/nL7hiovM0z
ok 47 - generate report for send_test_report 'yes'
ok 48 - report was sent for send_test_report 'yes'
ok 49 - saw report sent message for send_test_report 'yes'
ok
t/64_transport.t ............... 
1..37
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-Pass to temp directory /tmp/NMcNH0rWQW
ok 7 - generate report for t-Pass
ok 8 - report was sent for t-Pass
ok 9 - saw report sent message for t-Pass
ok 10 - by default, transport should be be set to Metabase
ok 11 - home directory mocked
ok 12 - config directory created
ok 13 - created mock metabase file for testing
ok 14 - created temp config file
ok 15 - Copying t-Pass to temp directory /tmp/m2LJpoqVzD
ok 16 - generate report for t-Pass
ok 17 - report was sent for t-Pass
ok 18 - saw report sent message for t-Pass
ok 19 - transport Metabase in config was properly set
ok 20 - home directory mocked
ok 21 - config directory created
ok 22 - created mock metabase file for testing
ok 23 - created temp config file
ok 24 - Copying t-Pass to temp directory /tmp/_Uiy0kJuRN
ok 25 - generate report for t-Pass
ok 26 - report was sent for t-Pass
ok 27 - saw report sent message for t-Pass
ok 28 - transport Mail::Send in config was properly set
ok 29 - home directory mocked
ok 30 - config directory created
ok 31 - created mock metabase file for testing
ok 32 - created temp config file
ok 33 - Copying t-Pass to temp directory /tmp/qQIvHrn7JF
ok 34 - generate report for t-Pass
ok 35 - report not sent for t-Pass
ok 36 - saw report not sent message for t-Pass
ok 37 - saw invalid transport warnings
ok
t/65_skipfile.t ................ 
1..33
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-Fail to temp directory /tmp/0VAZnUjmDg
ok 7 - generate report for dist *not* in send_skipfile
ok 8 - report was sent for dist *not* in send_skipfile
ok 9 - saw report sent message for dist *not* in send_skipfile
ok 10 - home directory mocked
ok 11 - config directory created
ok 12 - created mock metabase file for testing
ok 13 - created temp config file
ok 14 - Copying t-Fail to temp directory /tmp/hQMDIld9z1
ok 15 - generate report for dist author in send_skipfile
ok 16 - report not sent for dist author in send_skipfile
ok 17 - saw report not sent message for dist author in send_skipfile
ok 18 - home directory mocked
ok 19 - config directory created
ok 20 - created mock metabase file for testing
ok 21 - created temp config file
ok 22 - Copying t-Fail to temp directory /tmp/Q52D5idQEU
ok 23 - generate report for dist name in send_skipfile
ok 24 - report not sent for dist name in send_skipfile
ok 25 - saw report not sent message for dist name in send_skipfile
ok 26 - home directory mocked
ok 27 - config directory created
ok 28 - created mock metabase file for testing
ok 29 - created temp config file
ok 30 - Copying t-Fail to temp directory /tmp/PF6SJOkflI
ok 31 - generate report for dist name in - case insensitive send_skipfile
ok 32 - report not sent for dist name in - case insensitive send_skipfile
ok 33 - saw report not sent message for dist name in - case insensitive send_skipfile
ok
t/66_have_tested.t ............. 
1..22
ok 1 - temporary config dir created
ok 2 - copied sample old history file to config directory
ok 3 - history file is writeable
ok 4 - require CPAN::Reporter::History;
ok 5 - have_tested() dies with odd number of arguments
ok 6 - have_tested() dies with unknown parameter
ok 7 - have_tested() with no args gives everything on this platform
ok 8 - asking for a unique dist
ok 9 - returned an AoH
ok 10 - hash fields as expected
ok 11 - taint is supported, and the history file agrees
ok 12 - asking for multiple dist reports (only on this platform)
ok 13 - asking for multiple dist reports (with none on this platform)
ok 14 - asking for all test phase reports (defaults to this platform)
ok 15 - asking for all na grade reports (defaults to this platform)
ok 16 - asking for all NA grade reports (defaults to this platform)
ok 17 - asking for all DISCARD grade reports (defaults to this platform)
ok 18 - asking for dist in test phase (defaults to this platform)
ok 19 - asking for dist across any perl/archname/osvers
ok 20 - asking for all results from an archname
ok 21 - asking for all results from a perl version
ok 22 - asking for all results from an OS version
ok
t/67_distfile.t ................ 
1..10
ok 1 - require CPAN::Reporter;
ok 2 - home directory mocked
ok 3 - config directory created
ok 4 - created mock metabase file for testing
ok 5 - created temp config file
ok 6 - Copying t-Pass to temp directory /tmp/QeC1gNaGae
ok 7 - generate report for t-Pass
ok 8 - report was sent for t-Pass
ok 9 - saw report sent message for t-Pass
ok 10 - CPAN::Reporter sets Test::Reporter->distfile
ok
t/68_is_make.t ................. 
1..22
ok 1 - require CPAN::Reporter;
ok 2 - CPAN::Reporter->can('_is_make')
ok 3 - perl Makefile.PL
ok 4 - perl Makefile.PL LIBS=/foo
ok 5 - make
ok 6 - make LIBS=/foo
ok 7 - make test
ok 8 - make test TEST_VERBOSE=1
ok 9 - dmake
ok 10 - dmake LIBS=/foo
ok 11 - dmake test
ok 12 - dmake test TEST_VERBOSE=1
ok 13 - nmake
ok 14 - nmake LIBS=/foo
ok 15 - nmake test
ok 16 - nmake test TEST_VERBOSE=1
ok 17 - perl Build.PL
ok 18 - perl Build.PL LIBS=/foo
ok 19 - Build
ok 20 - Build LIBS=/foo
ok 21 - Build test
ok 22 - Build test TEST_VERBOSE=1
ok
t/70_darwin_move_config.t ...... 
1..9
ok 1 - require CPAN::Reporter::Config;
ok 2 - non-darwin logic: old config dir still in place
ok 3 - non-darwin logic: new config dir not created
ok 4 - require CPAN::Reporter::Config;
ok 5 - CPAN::Reporter::Config reloaded
ok 6 - darwin logic: old config-dir removed
ok 7 - darwin logic: new config-dir created
ok 8 - darwin logic: new config contents correct
ok 9 - cleaned up temp directories
ok
t/71_missing_config.t .......... 
1..32
ok 1 - require CPAN::Reporter;
ok 2 - Copying t-Pass to temp directory /tmp/MCE3oOZ3bS
ok 3 - t-Pass: Makefile.PL successful
ok 4 - t-Pass: 'make test' returned 1
ok 5 - t-Pass: 'make test' grade reported as 'pass'
ok 6 - t-Pass: report notification correct
ok 7 - t-Pass: test results not sent
ok 8 - t-Pass: 'make test' grade explanation correct
ok 9 - Copying t-Pass to temp directory /tmp/VLUmiJjq6n
ok 10 - t-Pass: Build.PL successful
ok 11 - t-Pass: 'perl Build test' returned 1
ok 12 - t-Pass: 'perl Build test' grade reported as 'pass'
ok 13 - t-Pass: report notification correct
ok 14 - t-Pass: test results not sent
ok 15 - t-Pass: 'perl Build test' grade explanation correct
ok 16 - Copying t-Fail to temp directory /tmp/OlpiqBWqty
ok 17 - t-Fail: Makefile.PL successful
ok 18 - t-Fail: 'make test' returned 0
ok 19 - t-Fail: 'make test' grade reported as 'fail'
ok 20 - t-Fail: report notification correct
ok 21 - t-Fail: test results not sent
ok 22 - t-Fail: 'make test' grade explanation correct
ok 23 - Copying t-Fail to temp directory /tmp/ZrY2LY7PuO
ok 24 - t-Fail: Build.PL successful
ok 25 - t-Fail: 'perl Build test' returned 0
ok 26 - t-Fail: 'perl Build test' grade reported as 'fail'
ok 27 - t-Fail: report notification correct
ok 28 - t-Fail: test results not sent
ok 29 - t-Fail: 'perl Build test' grade explanation correct
ok 30 - config file not found warnings
ok 31 - email address required warning
ok 32 - report not sent notice
ok
t/72_rename_history.t .......... 
1..12
ok 1 - temporary config dir created
ok 2 - no history files yet
ok 3 - require CPAN::Reporter::History;
ok 4 - still no history files
ok 5 - copied sample old history file to config directory
ok 6 - require CPAN::Reporter::History;
ok 7 - saw upgrading notice
ok 8 - old history file still exists
ok 9 - new history file was created
ok 10 - new history contents as expected
ok 11 - require CPAN::Reporter::History;
ok 12 - new history file unmodified
ok
t/73_autoflush.t ............... 
1..5
ok 1 - require CPAN::Reporter;
ok 2 - Makefile.PL had $| = 1
ok 3 - NotMakefile.PL had $| = 0
ok 4 - Build.PL had $| = 1
ok 5 - NotBuild.PL had $| = 0
ok
All tests successful.
Files=41, Tests=1939, 187 wallclock secs ( 0.20 usr  0.08 sys + 131.42 cusr 23.07 csys = 154.77 CPU)
Result: PASS
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   create-stamp debian/debhelper-build-stamp
   dh_prep
   dh_auto_install --destdir=debian/libcpan-reporter-perl/
	make -j2 install DESTDIR=/<<PKGBUILDDIR>>/debian/libcpan-reporter-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Manifying 6 pod documents
Installing /<<PKGBUILDDIR>>/debian/libcpan-reporter-perl/usr/share/perl5/CPAN/Reporter.pm
Installing /<<PKGBUILDDIR>>/debian/libcpan-reporter-perl/usr/share/perl5/CPAN/Reporter/Config.pm
Installing /<<PKGBUILDDIR>>/debian/libcpan-reporter-perl/usr/share/perl5/CPAN/Reporter/FAQ.pm
Installing /<<PKGBUILDDIR>>/debian/libcpan-reporter-perl/usr/share/perl5/CPAN/Reporter/API.pm
Installing /<<PKGBUILDDIR>>/debian/libcpan-reporter-perl/usr/share/perl5/CPAN/Reporter/History.pm
Installing /<<PKGBUILDDIR>>/debian/libcpan-reporter-perl/usr/share/perl5/CPAN/Reporter/PrereqCheck.pm
Installing /<<PKGBUILDDIR>>/debian/libcpan-reporter-perl/usr/share/man/man3/CPAN::Reporter::Config.3pm
Installing /<<PKGBUILDDIR>>/debian/libcpan-reporter-perl/usr/share/man/man3/CPAN::Reporter.3pm
Installing /<<PKGBUILDDIR>>/debian/libcpan-reporter-perl/usr/share/man/man3/CPAN::Reporter::API.3pm
Installing /<<PKGBUILDDIR>>/debian/libcpan-reporter-perl/usr/share/man/man3/CPAN::Reporter::FAQ.3pm
Installing /<<PKGBUILDDIR>>/debian/libcpan-reporter-perl/usr/share/man/man3/CPAN::Reporter::History.3pm
Installing /<<PKGBUILDDIR>>/debian/libcpan-reporter-perl/usr/share/man/man3/CPAN::Reporter::PrereqCheck.3pm
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
   dh_installdocs
   dh_installchangelogs
   dh_installexamples
   dh_installman
   dh_perl
   dh_link
   dh_strip_nondeterminism
   dh_compress
   dh_fixperms
   dh_missing
   dh_installdeb
   dh_gencontrol
   dh_md5sums
   dh_builddeb
dpkg-deb: building package 'libcpan-reporter-perl' in '../libcpan-reporter-perl_1.2019-1_all.deb'.
 dpkg-genbuildinfo -O../libcpan-reporter-perl_1.2019-1_amd64.buildinfo
 dpkg-genchanges -O../libcpan-reporter-perl_1.2019-1_amd64.changes
dpkg-genchanges: info: including full source code in upload
 dpkg-source -Zxz --after-build .
dpkg-buildpackage: info: full upload (original source is included)
--------------------------------------------------------------------------------
Build finished at 2024-08-04T05:52:19Z

Finished
--------

I: Built successfully

+------------------------------------------------------------------------------+
| Changes                                                                      |
+------------------------------------------------------------------------------+


libcpan-reporter-perl_1.2019-1_amd64.changes:
---------------------------------------------

Format: 1.8
Date: Mon, 26 Jun 2023 20:50:36 +0200
Source: libcpan-reporter-perl
Binary: libcpan-reporter-perl
Architecture: source all
Version: 1.2019-1
Distribution: perl-5.40-throwaway
Urgency: medium
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Changed-By: gregor herrmann <gregoa@debian.org>
Description:
 libcpan-reporter-perl - module which adds CPAN Testers reporting to CPAN.pm
Changes:
 libcpan-reporter-perl (1.2019-1) unstable; urgency=medium
 .
   * Team upload.
 .
   * Revert "Move libmodule-build-perl from Build-Depends-Indep
     to Build-Depends."
     It's only needed for tests.
 .
   * Import upstream version 1.2019.
   * Update years of upstream copyright.
   * Drop now unneeded test dependencies.
   * Declare compliance with Debian Policy 4.6.2.
   * Set Rules-Requires-Root: no.
   * Bump debhelper-compat to 13.
   * Drop unneeded unversioned runtime dependency on perl.
   * Annotate test-only build dependencies with <!nocheck>.
   * Use HTTPS for some URLs in debian/.
Checksums-Sha1:
 9c60b9636e5e28892562dfd4b0d8000eef87fe0a 1535 libcpan-reporter-perl_1.2019-1.dsc
 078a3349517e07ddade11959a6c9493630e8ca6a 116985 libcpan-reporter-perl_1.2019.orig.tar.gz
 5625b2388700dc9c4e1e05397378d26d32f82d43 3244 libcpan-reporter-perl_1.2019-1.debian.tar.xz
 883e86ab418a57e8aedc6397a199402aac5af441 72840 libcpan-reporter-perl_1.2019-1_all.deb
 54be51ed3fb8d22deaea90017d730fe50dd06cb8 5467 libcpan-reporter-perl_1.2019-1_amd64.buildinfo
Checksums-Sha256:
 be5caa91e0530ee1f87e40cf8e6c8082e2685d54070d4a38fc01fea2b69aa87d 1535 libcpan-reporter-perl_1.2019-1.dsc
 8b0bad08c6ad9dbcbb4681eba1082af845d4fe897ae97c06187889832322b60b 116985 libcpan-reporter-perl_1.2019.orig.tar.gz
 1c291a2bbea88dd05b12874e9fc3c28b871574e33e4e7bd08f5fa455f89324ca 3244 libcpan-reporter-perl_1.2019-1.debian.tar.xz
 933f13db63544c8c54ca6aefb4715e5eb10297e9bd8b97a297cccedc257f2da3 72840 libcpan-reporter-perl_1.2019-1_all.deb
 9a98cb370e4d75c16b191c93da87bec7b2c2cbe44c184dffb8d3f76a310b9f2a 5467 libcpan-reporter-perl_1.2019-1_amd64.buildinfo
Files:
 5695e75389953e2f2fe610402a574586 1535 perl optional libcpan-reporter-perl_1.2019-1.dsc
 ca3d9e060466fd8b564b10b652d3577b 116985 perl optional libcpan-reporter-perl_1.2019.orig.tar.gz
 fba83a06b216bb44a1875bda89390b08 3244 perl optional libcpan-reporter-perl_1.2019-1.debian.tar.xz
 c894604e7b894b4d3e949a7f0a981202 72840 perl optional libcpan-reporter-perl_1.2019-1_all.deb
 58b57981c6225adef64487f6c7036cd6 5467 perl optional libcpan-reporter-perl_1.2019-1_amd64.buildinfo

+------------------------------------------------------------------------------+
| Buildinfo                                                                    |
+------------------------------------------------------------------------------+

Format: 1.0
Source: libcpan-reporter-perl
Binary: libcpan-reporter-perl
Architecture: all source
Version: 1.2019-1
Checksums-Md5:
 5695e75389953e2f2fe610402a574586 1535 libcpan-reporter-perl_1.2019-1.dsc
 c894604e7b894b4d3e949a7f0a981202 72840 libcpan-reporter-perl_1.2019-1_all.deb
Checksums-Sha1:
 9c60b9636e5e28892562dfd4b0d8000eef87fe0a 1535 libcpan-reporter-perl_1.2019-1.dsc
 883e86ab418a57e8aedc6397a199402aac5af441 72840 libcpan-reporter-perl_1.2019-1_all.deb
Checksums-Sha256:
 be5caa91e0530ee1f87e40cf8e6c8082e2685d54070d4a38fc01fea2b69aa87d 1535 libcpan-reporter-perl_1.2019-1.dsc
 933f13db63544c8c54ca6aefb4715e5eb10297e9bd8b97a297cccedc257f2da3 72840 libcpan-reporter-perl_1.2019-1_all.deb
Build-Origin: Debian
Build-Architecture: amd64
Build-Date: Sun, 04 Aug 2024 05:52:19 +0000
Build-Path: /<<PKGBUILDDIR>>
Build-Tainted-By:
 merged-usr-via-aliased-dirs
 usr-local-has-programs
Installed-Build-Depends:
 autoconf (= 2.71-3),
 automake (= 1:1.16.5-1.3),
 autopoint (= 0.22.5-2),
 autotools-dev (= 20220109.1),
 base-files (= 13.4),
 base-passwd (= 3.6.4),
 bash (= 5.2.21-2.1),
 binutils (= 2.42.90.20240720-2),
 binutils-common (= 2.42.90.20240720-2),
 binutils-x86-64-linux-gnu (= 2.42.90.20240720-2),
 bsdextrautils (= 2.40.2-1),
 bsdutils (= 1:2.40.2-1),
 build-essential (= 12.10),
 bzip2 (= 1.0.8-5.1),
 coreutils (= 9.4-3.1),
 cpp (= 4:14.1.0-2),
 cpp-13 (= 13.3.0-4),
 cpp-13-x86-64-linux-gnu (= 13.3.0-4),
 cpp-14 (= 14.2.0-1),
 cpp-14-x86-64-linux-gnu (= 14.2.0-1),
 cpp-x86-64-linux-gnu (= 4:14.1.0-2),
 dash (= 0.5.12-9),
 debconf (= 1.5.87),
 debhelper (= 13.16),
 debianutils (= 5.20),
 dh-autoreconf (= 20),
 dh-strip-nondeterminism (= 1.14.0-1),
 diffutils (= 1:3.10-1),
 dpkg (= 1.22.11),
 dpkg-dev (= 1.22.11),
 dwz (= 0.15-1+b1),
 file (= 1:5.45-3),
 findutils (= 4.10.0-2),
 g++ (= 4:14.1.0-2),
 g++-14 (= 14.2.0-1),
 g++-14-x86-64-linux-gnu (= 14.2.0-1),
 g++-x86-64-linux-gnu (= 4:14.1.0-2),
 gcc (= 4:14.1.0-2),
 gcc-13 (= 13.3.0-4),
 gcc-13-base (= 13.3.0-4),
 gcc-13-x86-64-linux-gnu (= 13.3.0-4),
 gcc-14 (= 14.2.0-1),
 gcc-14-base (= 14.2.0-1),
 gcc-14-x86-64-linux-gnu (= 14.2.0-1),
 gcc-x86-64-linux-gnu (= 4:14.1.0-2),
 gettext (= 0.22.5-2),
 gettext-base (= 0.22.5-2),
 grep (= 3.11-4),
 groff-base (= 1.23.0-5),
 gzip (= 1.12-1.1),
 hostname (= 3.23+nmu2),
 init-system-helpers (= 1.66),
 intltool-debian (= 0.35.0+20060710.6),
 libacl1 (= 2.3.2-2),
 libarchive-zip-perl (= 1.68-1),
 libasan8 (= 14.2.0-1),
 libatomic1 (= 14.2.0-1),
 libattr1 (= 1:2.5.2-1),
 libaudit-common (= 1:3.1.2-4),
 libaudit1 (= 1:3.1.2-4+b1),
 libbinutils (= 2.42.90.20240720-2),
 libblkid1 (= 2.40.2-1),
 libbz2-1.0 (= 1.0.8-5.1),
 libc-bin (= 2.39-6),
 libc-dev-bin (= 2.39-6),
 libc6 (= 2.39-6),
 libc6-dev (= 2.39-6),
 libcap-ng0 (= 0.8.5-1+b1),
 libcap2 (= 1:2.66-5),
 libcapture-tiny-perl (= 0.48-2),
 libcc1-0 (= 14.2.0-1),
 libconfig-tiny-perl (= 2.30-1),
 libcrypt-dev (= 1:4.4.36-4),
 libcrypt1 (= 1:4.4.36-4),
 libctf-nobfd0 (= 2.42.90.20240720-2),
 libctf0 (= 2.42.90.20240720-2),
 libdb5.3t64 (= 5.3.28+dfsg2-7),
 libdebconfclient0 (= 0.272),
 libdebhelper-perl (= 13.16),
 libdevel-autoflush-perl (= 0.06-3),
 libdpkg-perl (= 1.22.11),
 libelf1t64 (= 0.191-2),
 libfile-homedir-perl (= 1.006-2),
 libfile-pushd-perl (= 1.016-2),
 libfile-stripnondeterminism-perl (= 1.14.0-1),
 libfile-which-perl (= 1.27-2),
 libgcc-13-dev (= 13.3.0-4),
 libgcc-14-dev (= 14.2.0-1),
 libgcc-s1 (= 14.2.0-1),
 libgdbm-compat4t64 (= 1.23-6),
 libgdbm6t64 (= 1.23-6),
 libgmp10 (= 2:6.3.0+dfsg-2+b1),
 libgomp1 (= 14.2.0-1),
 libgprofng0 (= 2.42.90.20240720-2),
 libhwasan0 (= 14.2.0-1),
 libicu72 (= 72.1-5),
 libisl23 (= 0.26-3+b2),
 libitm1 (= 14.2.0-1),
 libjansson4 (= 2.14-2+b2),
 liblsan0 (= 14.2.0-1),
 liblzma5 (= 5.6.2-2),
 libmagic-mgc (= 1:5.45-3),
 libmagic1t64 (= 1:5.45-3),
 libmd0 (= 1.1.0-2),
 libmodule-build-perl (= 0.423400-2),
 libmount1 (= 2.40.2-1),
 libmpc3 (= 1.3.1-1+b2),
 libmpfr6 (= 4.2.1-1+b1),
 libpam-modules (= 1.5.3-7),
 libpam-modules-bin (= 1.5.3-7),
 libpam-runtime (= 1.5.3-7),
 libpam0g (= 1.5.3-7),
 libpcre2-8-0 (= 10.42-4+b1),
 libperl5.40 (= 5.40.0-1),
 libpipeline1 (= 1.5.7-2),
 libprobe-perl-perl (= 0.03-3),
 libquadmath0 (= 14.2.0-1),
 libseccomp2 (= 2.5.5-1+b1),
 libselinux1 (= 3.5-2+b3),
 libsframe1 (= 2.42.90.20240720-2),
 libsmartcols1 (= 2.40.2-1),
 libssl3t64 (= 3.3.1-2),
 libstdc++-14-dev (= 14.2.0-1),
 libstdc++6 (= 14.2.0-1),
 libsystemd0 (= 256.4-2),
 libtest-reporter-perl (= 1.62-2),
 libtinfo6 (= 6.5-2),
 libtool (= 2.4.7-7),
 libtsan2 (= 14.2.0-1),
 libubsan1 (= 14.2.0-1),
 libuchardet0 (= 0.0.8-1+b1),
 libudev1 (= 256.4-2),
 libunistring5 (= 1.2-1),
 libuuid1 (= 2.40.2-1),
 libxml2 (= 2.12.7+dfsg-3+b1),
 libzstd1 (= 1.5.6+dfsg-1),
 linux-libc-dev (= 6.9.12-1),
 m4 (= 1.4.19-4),
 make (= 4.3-4.1),
 man-db (= 2.12.1-2),
 mawk (= 1.3.4.20240622-2),
 ncurses-base (= 6.5-2),
 ncurses-bin (= 6.5-2),
 patch (= 2.7.6-7),
 perl (= 5.40.0-1),
 perl-base (= 5.40.0-1),
 perl-modules-5.40 (= 5.40.0-1),
 po-debconf (= 1.0.21+nmu1),
 rpcsvc-proto (= 1.4.3-1),
 sed (= 4.9-2),
 sensible-utils (= 0.0.24),
 sysvinit-utils (= 3.09-2),
 tar (= 1.35+dfsg-3),
 usr-is-merged (= 39),
 util-linux (= 2.40.2-1),
 xz-utils (= 5.6.2-2),
 zlib1g (= 1:1.3.dfsg+really1.3.1-1)
Environment:
 DEB_BUILD_OPTIONS="parallel=2"
 LANG="C.UTF-8"
 LC_COLLATE="C.UTF-8"
 LC_CTYPE="C.UTF-8"
 LD_LIBRARY_PATH="/usr/lib/libeatmydata"
 SOURCE_DATE_EPOCH="1687805436"


+------------------------------------------------------------------------------+
| Package contents                                                             |
+------------------------------------------------------------------------------+


libcpan-reporter-perl_1.2019-1_all.deb
--------------------------------------

 new Debian package, version 2.0.
 size 72840 bytes: control archive=1412 bytes.
    1126 bytes,    20 lines      control
    1433 bytes,    18 lines      md5sums
 Package: libcpan-reporter-perl
 Version: 1.2019-1
 Architecture: all
 Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
 Installed-Size: 186
 Depends: perl:any, libcapture-tiny-perl, libconfig-tiny-perl, libdevel-autoflush-perl, libfile-homedir-perl, libprobe-perl-perl, libtest-reporter-perl
 Section: perl
 Priority: optional
 Homepage: https://metacpan.org/release/CPAN-Reporter
 Description: module which adds CPAN Testers reporting to CPAN.pm
  The CPAN Testers project captures and analyzes detailed results from building
  and testing CPAN distributions on multiple operating systems and multiple
  versions of Perl. This provides valuable feedback to module authors and
  potential users to identify bugs or platform compatibility issues and
  improves the overall quality and value of CPAN.
  .
  One way individuals can contribute is to send a report for each module that
  they test or install. CPAN::Reporter is an add-on for the CPAN.pm module to
  send the results of building and testing modules to the CPAN Testers project.
  Full support for CPAN::Reporter is available in CPAN.pm as of version 1.92.

drwxr-xr-x root/root         0 2023-06-26 18:50 ./
drwxr-xr-x root/root         0 2023-06-26 18:50 ./usr/
drwxr-xr-x root/root         0 2023-06-26 18:50 ./usr/share/
drwxr-xr-x root/root         0 2023-06-26 18:50 ./usr/share/doc/
drwxr-xr-x root/root         0 2023-06-26 18:50 ./usr/share/doc/libcpan-reporter-perl/
-rw-r--r-- root/root      3049 2023-05-01 01:14 ./usr/share/doc/libcpan-reporter-perl/CONTRIBUTING.mkdn
-rw-r--r-- root/root      3590 2023-05-01 01:14 ./usr/share/doc/libcpan-reporter-perl/Todo
-rw-r--r-- root/root       986 2023-06-26 18:50 ./usr/share/doc/libcpan-reporter-perl/changelog.Debian.gz
-rw-r--r-- root/root     16449 2023-05-01 01:14 ./usr/share/doc/libcpan-reporter-perl/changelog.gz
-rw-r--r-- root/root      1755 2023-06-26 18:50 ./usr/share/doc/libcpan-reporter-perl/copyright
drwxr-xr-x root/root         0 2023-06-26 18:50 ./usr/share/doc/libcpan-reporter-perl/examples/
-rw-r--r-- root/root       296 2023-05-01 01:14 ./usr/share/doc/libcpan-reporter-perl/examples/config.ini
drwxr-xr-x root/root         0 2023-06-26 18:50 ./usr/share/man/
drwxr-xr-x root/root         0 2023-06-26 18:50 ./usr/share/man/man3/
-rw-r--r-- root/root      4553 2023-06-26 18:50 ./usr/share/man/man3/CPAN::Reporter.3pm.gz
-rw-r--r-- root/root      2704 2023-06-26 18:50 ./usr/share/man/man3/CPAN::Reporter::API.3pm.gz
-rw-r--r-- root/root      4439 2023-06-26 18:50 ./usr/share/man/man3/CPAN::Reporter::Config.3pm.gz
-rw-r--r-- root/root      2761 2023-06-26 18:50 ./usr/share/man/man3/CPAN::Reporter::FAQ.3pm.gz
-rw-r--r-- root/root      2137 2023-06-26 18:50 ./usr/share/man/man3/CPAN::Reporter::History.3pm.gz
-rw-r--r-- root/root      1755 2023-06-26 18:50 ./usr/share/man/man3/CPAN::Reporter::PrereqCheck.3pm.gz
drwxr-xr-x root/root         0 2023-06-26 18:50 ./usr/share/perl5/
drwxr-xr-x root/root         0 2023-06-26 18:50 ./usr/share/perl5/CPAN/
-rw-r--r-- root/root     59573 2023-05-01 01:14 ./usr/share/perl5/CPAN/Reporter.pm
drwxr-xr-x root/root         0 2023-06-26 18:50 ./usr/share/perl5/CPAN/Reporter/
-rw-r--r-- root/root      4925 2023-05-01 01:14 ./usr/share/perl5/CPAN/Reporter/API.pm
-rw-r--r-- root/root     31627 2023-05-01 01:14 ./usr/share/perl5/CPAN/Reporter/Config.pm
-rw-r--r-- root/root      4352 2023-05-01 01:14 ./usr/share/perl5/CPAN/Reporter/FAQ.pm
-rw-r--r-- root/root     13843 2023-05-01 01:14 ./usr/share/perl5/CPAN/Reporter/History.pm
-rw-r--r-- root/root     10480 2023-05-01 01:14 ./usr/share/perl5/CPAN/Reporter/PrereqCheck.pm


+------------------------------------------------------------------------------+
| Post Build                                                                   |
+------------------------------------------------------------------------------+


+------------------------------------------------------------------------------+
| Cleanup                                                                      |
+------------------------------------------------------------------------------+

Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use

+------------------------------------------------------------------------------+
| Summary                                                                      |
+------------------------------------------------------------------------------+

Build Architecture: amd64
Build Type: full
Build-Space: 3552
Build-Time: 189
Distribution: perl-5.40-throwaway
Host Architecture: amd64
Install-Time: 4
Job: /srv/debomatic/incoming/libcpan-reporter-perl_1.2019-1.dsc
Machine Architecture: amd64
Package: libcpan-reporter-perl
Package-Time: 196
Source-Version: 1.2019-1
Space: 3552
Status: successful
Version: 1.2019-1
--------------------------------------------------------------------------------
Finished at 2024-08-04T05:52:19Z
Build needed 00:03:16, 3552k disk space